[ovirt-users] ovirt 3.6.6 and gluster 3.7.13

David Gossage dgossage at carouselchecks.com
Mon Jul 25 05:34:57 EDT 2016 

On Mon, Jul 25, 2016 at 1:01 AM, Krutika Dhananjay <kdhananj at redhat.com>
wrote:

> Hi,
>
> Thanks for the logs. So I have identified one issue from the logs for
> which the fix is this: http://review.gluster.org/#/c/14669/. Because of a
> bug in the code, ENOENT was getting converted to EPERM and being propagated
> up the stack causing the reads to bail out early with 'Operation not
> permitted' errors.
> I still need to find out two things:
> i) why there was a readv() sent on a non-existent (ENOENT) file (this is
> important since some of the other users have not faced or reported this
> issue on gluster-users with 3.7.13)
> ii) need to see if there's a way to work around this issue.
>
> Do you mind sharing the steps needed to be executed to run into this
> issue? This is so that we can apply our patches, test and ensure they fix
> the problem.
>

Well after upgrade of gluster all I did was start ovirt hosts up which
launched and started their ha-agent and broker processes.  I don't believe
I started getting any errors till it mounted GLUSTER1.  I had enabled
sharding but had no sharded disk images yet.  Not sure if the check for
shards would have caused that.  Unfortunately I can't just update this
cluster and try and see what caused it as it has sme VM's users expect to
be available in few hours.

I can see if I can get my test setup to recreate it.  I think I'll need to
de-activate data center so I can detach the storage thats on xfs and attach
the one thats over zfs with sharding enabled.  My test is 3 bricks on same
local machine, with 3 different volumes but I think im running into sanlock
issue or something as it won't mount more than one volume that was created
locally.


-Krutika
>
> On Fri, Jul 22, 2016 at 7:17 PM, David Gossage <
> dgossage at carouselchecks.com> wrote:
>
>> Trimmed out the logs to just about when I was shutting down ovirt servers
>> for updates which was 14:30 UTC 2016-07-09
>>
>> Pre-update settings were
>>
>> Volume Name: GLUSTER1
>> Type: Replicate
>> Volume ID: 167b8e57-28c3-447a-95cc-8410cbdf3f7f
>> Status: Started
>> Number of Bricks: 1 x 3 = 3
>> Transport-type: tcp
>> Bricks:
>> Brick1: ccgl1.gl.local:/gluster1/BRICK1/1
>> Brick2: ccgl2.gl.local:/gluster1/BRICK1/1
>> Brick3: ccgl3.gl.local:/gluster1/BRICK1/1
>> Options Reconfigured:
>> performance.readdir-ahead: on
>> storage.owner-uid: 36
>> storage.owner-gid: 36
>> performance.quick-read: off
>> performance.read-ahead: off
>> performance.io-cache: off
>> performance.stat-prefetch: off
>> cluster.eager-lock: enable
>> network.remote-dio: enable
>> cluster.quorum-type: auto
>> cluster.server-quorum-type: server
>> server.allow-insecure: on
>> cluster.self-heal-window-size: 1024
>> cluster.background-self-heal-count: 16
>> performance.strict-write-ordering: off
>> nfs.disable: on
>> nfs.addr-namelookup: off
>> nfs.enable-ino32: off
>>
>> At the time of updates ccgl3 was offline from bad nic on server but had
>> been so for about a week with no issues in volume
>>
>> Shortly after update I added these settings to enable sharding but did
>> not as of yet have any VM images sharded.
>> features.shard-block-size: 64MB
>> features.shard: on
>>
>>
>>
>>
>> *David Gossage*
>> *Carousel Checks Inc. | System Administrator*
>> *Office* 708.613.2284
>>
>> On Fri, Jul 22, 2016 at 5:00 AM, Krutika Dhananjay <kdhananj at redhat.com>
>> wrote:
>>
>>> Hi David,
>>>
>>> Could you also share the brick logs from the affected volume? They're
>>> located at
>>> /var/log/glusterfs/bricks/<hyphenated-path-to-the-brick-directory>.log.
>>>
>>> Also, could you share the volume configuration (output of `gluster
>>> volume info <VOL>`) for the affected volume(s) AND at the time you actually
>>> saw this issue?
>>>
>>> -Krutika
>>>
>>>
>>>
>>>
>>> On Thu, Jul 21, 2016 at 11:23 PM, David Gossage <
>>> dgossage at carouselchecks.com> wrote:
>>>
>>>> On Thu, Jul 21, 2016 at 11:47 AM, Scott <romracer at gmail.com> wrote:
>>>>
>>>>> Hi David,
>>>>>
>>>>> My backend storage is ZFS.
>>>>>
>>>>> I thought about moving from FUSE to NFS mounts for my Gluster volumes
>>>>> to help test.  But since I use hosted engine this would be a real pain.
>>>>> Its difficult to modify the storage domain type/path in the
>>>>> hosted-engine.conf.  And I don't want to go through the process of
>>>>> re-deploying hosted engine.
>>>>>
>>>>>
>>>> I found this
>>>>
>>>> https://bugzilla.redhat.com/show_bug.cgi?id=1347553
>>>>
>>>> Not sure if related.
>>>>
>>>> But I also have zfs backend, another user in gluster mailing list had
>>>> issues and used zfs backend although she used proxmox and got it working by
>>>> changing disk to writeback cache I think it was.
>>>>
>>>> I also use hosted engine, but I run my gluster volume for HE actually
>>>> on a LVM separate from zfs on xfs and if i recall it did not have the
>>>> issues my gluster on zfs did.  I'm wondering now if the issue was zfs
>>>> settings.
>>>>
>>>> Hopefully should have a test machone up soon I can play around with
>>>> more.
>>>>
>>>> Scott
>>>>>
>>>>> On Thu, Jul 21, 2016 at 11:36 AM David Gossage <
>>>>> dgossage at carouselchecks.com> wrote:
>>>>>
>>>>>> What back end storage do you run gluster on?  xfs/zfs/ext4 etc?
>>>>>>
>>>>>> *David Gossage*
>>>>>> *Carousel Checks Inc. | System Administrator*
>>>>>> *Office* 708.613.2284
>>>>>>
>>>>>> On Thu, Jul 21, 2016 at 8:18 AM, Scott <romracer at gmail.com> wrote:
>>>>>>
>>>>>>> I get similar problems with oVirt 4.0.1 and hosted engine.  After
>>>>>>> upgrading all my hosts to Gluster 3.7.13 (client and server), I get the
>>>>>>> following:
>>>>>>>
>>>>>>> $ sudo hosted-engine --set-maintenance --mode=none
>>>>>>> Traceback (most recent call last):
>>>>>>>   File "/usr/lib64/python2.7/runpy.py", line 162, in
>>>>>>> _run_module_as_main
>>>>>>>     "__main__", fname, loader, pkg_name)
>>>>>>>   File "/usr/lib64/python2.7/runpy.py", line 72, in _run_code
>>>>>>>     exec code in run_globals
>>>>>>>   File
>>>>>>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_setup/set_maintenance.py",
>>>>>>> line 73, in <module>
>>>>>>>     if not maintenance.set_mode(sys.argv[1]):
>>>>>>>   File
>>>>>>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_setup/set_maintenance.py",
>>>>>>> line 61, in set_mode
>>>>>>>     value=m_global,
>>>>>>>   File
>>>>>>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py",
>>>>>>> line 259, in set_maintenance_mode
>>>>>>>     str(value))
>>>>>>>   File
>>>>>>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py",
>>>>>>> line 204, in set_global_md_flag
>>>>>>>     all_stats = broker.get_stats_from_storage(service)
>>>>>>>   File
>>>>>>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
>>>>>>> line 232, in get_stats_from_storage
>>>>>>>     result = self._checked_communicate(request)
>>>>>>>   File
>>>>>>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
>>>>>>> line 260, in _checked_communicate
>>>>>>>     .format(message or response))
>>>>>>> ovirt_hosted_engine_ha.lib.exceptions.RequestError: Request failed:
>>>>>>> failed to read metadata: [Errno 1] Operation not permitted
>>>>>>>
>>>>>>> If I only upgrade one host, then things will continue to work but my
>>>>>>> nodes are constantly healing shards.  My logs are also flooded with:
>>>>>>>
>>>>>>> [2016-07-21 13:15:14.137734] W [fuse-bridge.c:2227:fuse_readv_cbk]
>>>>>>> 0-glusterfs-fuse: 274714: READ => -1 gfid=4
>>>>>>> 41f2789-f6b1-4918-a280-1b9905a11429 fd=0x7f19bc0041d0 (Operation not
>>>>>>> permitted)
>>>>>>> The message "W [MSGID: 114031]
>>>>>>> [client-rpc-fops.c:3050:client3_3_readv_cbk] 0-data-client-0: remote
>>>>>>> operation failed [Operation not permitted]" repeated 6 times between
>>>>>>> [2016-07-21 13:13:24.134985] and [2016-07-21 13:15:04.132226]
>>>>>>> The message "W [MSGID: 114031]
>>>>>>> [client-rpc-fops.c:3050:client3_3_readv_cbk] 0-data-client-1: remote
>>>>>>> operation failed [Operation not permitted]" repeated 8 times between
>>>>>>> [2016-07-21 13:13:34.133116] and [2016-07-21 13:15:14.137178]
>>>>>>> The message "W [MSGID: 114031]
>>>>>>> [client-rpc-fops.c:3050:client3_3_readv_cbk] 0-data-client-2: remote
>>>>>>> operation failed [Operation not permitted]" repeated 7 times between
>>>>>>> [2016-07-21 13:13:24.135071] and [2016-07-21 13:15:14.137666]
>>>>>>> [2016-07-21 13:15:24.134647] W [MSGID: 114031]
>>>>>>> [client-rpc-fops.c:3050:client3_3_readv_cbk] 0-data-client-0: remote
>>>>>>> operation failed [Operation not permitted]
>>>>>>> [2016-07-21 13:15:24.134764] W [MSGID: 114031]
>>>>>>> [client-rpc-fops.c:3050:client3_3_readv_cbk] 0-data-client-2: remote
>>>>>>> operation failed [Operation not permitted]
>>>>>>> [2016-07-21 13:15:24.134793] W [fuse-bridge.c:2227:fuse_readv_cbk]
>>>>>>> 0-glusterfs-fuse: 274741: READ => -1
>>>>>>> gfid=441f2789-f6b1-4918-a280-1b9905a11429 fd=0x7f19bc0038f4 (Operation not
>>>>>>> permitted)
>>>>>>> [2016-07-21 13:15:34.135413] W [fuse-bridge.c:2227:fuse_readv_cbk]
>>>>>>> 0-glusterfs-fuse: 274756: READ => -1
>>>>>>> gfid=441f2789-f6b1-4918-a280-1b9905a11429 fd=0x7f19bc0041d0 (Operation not
>>>>>>> permitted)
>>>>>>> [2016-07-21 13:15:44.141062] W [fuse-bridge.c:2227:fuse_readv_cbk]
>>>>>>> 0-glusterfs-fuse: 274818: READ => -1
>>>>>>> gfid=441f2789-f6b1-4918-a280-1b9905a11429 fd=0x7f19bc0038f4 (Operation not
>>>>>>> permitted)
>>>>>>> [2016-07-21 13:15:54.133582] W [MSGID: 114031]
>>>>>>> [client-rpc-fops.c:3050:client3_3_readv_cbk] 0-data-client-1: remote
>>>>>>> operation failed [Operation not permitted]
>>>>>>> [2016-07-21 13:15:54.133629] W [fuse-bridge.c:2227:fuse_readv_cbk]
>>>>>>> 0-glusterfs-fuse: 274853: READ => -1
>>>>>>> gfid=441f2789-f6b1-4918-a280-1b9905a11429 fd=0x7f19bc0036d8 (Operation not
>>>>>>> permitted)
>>>>>>> [2016-07-21 13:16:04.133666] W [fuse-bridge.c:2227:fuse_readv_cbk]
>>>>>>> 0-glusterfs-fuse: 274879: READ => -1
>>>>>>> gfid=441f2789-f6b1-4918-a280-1b9905a11429 fd=0x7f19bc0041d0 (Operation not
>>>>>>> permitted)
>>>>>>> [2016-07-21 13:16:14.134954] W [fuse-bridge.c:2227:fuse_readv_cbk]
>>>>>>> 0-glusterfs-fuse: 274894: READ => -1
>>>>>>> gfid=441f2789-f6b1-4918-a280-1b9905a11429 fd=0x7f19bc0036d8 (Operation not
>>>>>>> permitted)
>>>>>>>
>>>>>>> Scott
>>>>>>>
>>>>>>>
>>>>>>> On Thu, Jul 21, 2016 at 6:57 AM Frank Rothenstein <
>>>>>>> f.rothenstein at bodden-kliniken.de> wrote:
>>>>>>>
>>>>>>>> Hey Devid,
>>>>>>>>
>>>>>>>> I have the very same problem on my test-cluster, despite on running
>>>>>>>> ovirt 4.0.
>>>>>>>> If you access your volumes via NFS all is fine, problem is FUSE. I
>>>>>>>> stayed on 3.7.13, but have no solution yet, now I use NFS.
>>>>>>>>
>>>>>>>> Frank
>>>>>>>>
>>>>>>>> Am Donnerstag, den 21.07.2016, 04:28 -0500 schrieb David Gossage:
>>>>>>>>
>>>>>>>> Anyone running one of recent 3.6.x lines and gluster using 3.7.13?
>>>>>>>> I am looking to upgrade gluster from 3.7.11->3.7.13 for some bug fixes, but
>>>>>>>> have been told by users on gluster mail list due to some gluster changes
>>>>>>>> I'd need to change the disk parameters to use writeback cache.  Something
>>>>>>>> to do with aio support being removed.
>>>>>>>>
>>>>>>>> I believe this could be done with custom parameters?  But I believe
>>>>>>>> strage tests are done using dd and would they fail with current settings
>>>>>>>> then? Last upgrade to 3.7.13 I had to rollback to 3.7.11 due to stability
>>>>>>>> isues where gluster storage would go into down state and always show N/A as
>>>>>>>> space available/used.  Even if hosts saw storage still and VM's were
>>>>>>>> running on it on all 3 hosts.
>>>>>>>>
>>>>>>>> Saw a lot of messages like these that went away once gluster
>>>>>>>> rollback finished
>>>>>>>>
>>>>>>>> [2016-07-09 15:27:46.935694] I [fuse-bridge.c:4083:fuse_init]
>>>>>>>> 0-glusterfs-fuse: FUSE inited with protocol versions: glusterfs 7.22 kernel
>>>>>>>> 7.22
>>>>>>>> [2016-07-09 15:27:49.555466] W [MSGID: 114031]
>>>>>>>> [client-rpc-fops.c:3050:client3_3_readv_cbk] 0-GLUSTER1-client-1: remote
>>>>>>>> operation failed [Operation not permitted]
>>>>>>>> [2016-07-09 15:27:49.556574] W [MSGID: 114031]
>>>>>>>> [client-rpc-fops.c:3050:client3_3_readv_cbk] 0-GLUSTER1-client-0: remote
>>>>>>>> operation failed [Operation not permitted]
>>>>>>>> [2016-07-09 15:27:49.556659] W [fuse-bridge.c:2227:fuse_readv_cbk]
>>>>>>>> 0-glusterfs-fuse: 80: READ => -1 gfid=deb61291-5176-4b81-8315-3f1cf8e3534d
>>>>>>>> fd=0x7f5224002f68 (Operation not permitted)
>>>>>>>> [2016-07-09 15:27:59.612477] W [MSGID: 114031]
>>>>>>>> [client-rpc-fops.c:3050:client3_3_readv_cbk] 0-GLUSTER1-client-1: remote
>>>>>>>> operation failed [Operation not permitted]
>>>>>>>> [2016-07-09 15:27:59.613700] W [MSGID: 114031]
>>>>>>>> [client-rpc-fops.c:3050:client3_3_readv_cbk] 0-GLUSTER1-client-0: remote
>>>>>>>> operation failed [Operation not permitted]
>>>>>>>> [2016-07-09 15:27:59.613781] W [fuse-bridge.c:2227:fuse_readv_cbk]
>>>>>>>> 0-glusterfs-fuse: 168: READ => -1 gfid=deb61291-5176-4b81-8315-3f1cf8e3534d
>>>>>>>> fd=0x7f5224002f68 (Operation not permitted)
>>>>>>>>
>>>>>>>> *David Gossage*
>>>>>>>> *Carousel Checks Inc. | System Administrator*
>>>>>>>> *Office* 708.613.2284
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Users mailing listUsers at ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> ------------------------------
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> ______________________________________________________________________________
>>>>>>>> BODDEN-KLINIKEN Ribnitz-Damgarten GmbH
>>>>>>>> Sandhufe 2
>>>>>>>> 18311 Ribnitz-Damgarten
>>>>>>>>
>>>>>>>> Telefon: 03821-700-0
>>>>>>>> Fax:       03821-700-240
>>>>>>>>
>>>>>>>> E-Mail: info at bodden-kliniken.de   Internet:
>>>>>>>> http://www.bodden-kliniken.de
>>>>>>>>
>>>>>>>>
>>>>>>>> Sitz: Ribnitz-Damgarten, Amtsgericht: Stralsund, HRB 2919, Steuer-Nr.: 079/133/40188
>>>>>>>>
>>>>>>>> Aufsichtsratsvorsitzende: Carmen Schröter, Geschäftsführer: Dr. Falko Milski
>>>>>>>>
>>>>>>>>
>>>>>>>> Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Wenn Sie nicht der vorge-
>>>>>>>>
>>>>>>>> sehene Adressat dieser E-Mail oder dessen Vertreter sein sollten, beachten Sie bitte, dass jede Form der Veröf-
>>>>>>>>
>>>>>>>> fentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail unzulässig ist. Wir bitten Sie, sofort den
>>>>>>>> Absender zu informieren und die E-Mail zu löschen.
>>>>>>>>
>>>>>>>>
>>>>>>>>              Bodden-Kliniken Ribnitz-Damgarten GmbH 2016
>>>>>>>> *** Virenfrei durch Kerio Mail Server und Sophos Antivirus ***
>>>>>>>> _______________________________________________
>>>>>>>> Users mailing list
>>>>>>>> Users at ovirt.org
>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>
>>>>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20160725/d99e32a8/attachment-0001.html>

More information about the Users mailing list