[ovirt-users] set up of fibre channel storage problem

Sat Mar 5 17:45:21 EST 2016

On Sun, Mar 6, 2016 at 12:36 AM, Campbell McLeay
<campbell.mcleay at framestore.com> wrote:
> Hi,
>
> I've set up a node in a cluster which I would l like to use the
> attached fibre channel disks as storage. The ovirt version is 3.6 and
> both hosts (engine and node) are running Scientific 7.2. When I select
> the fibre channel option in the ovirt manager GUI from the drop down
> menu in the storage section, it shows the target disks on the node
> host (actually symlinks named as 34 character IDs which I assume are
> created by multipathd, which point to the actual device in /dev such
> as /dev/dm-3). 'multipath -ll' shows the devices up and running:
>
> 36f01faf000e5fd64000007d255820b3d dm-1 DELL    ,MD36xxf
> size=5.7T features='2 pg_init_retries 50' hwhandler='1 rdac' wp=rw
> |-+- policy='service-time 0' prio=14 status=active
> | `- 8:0:0:3 sdi 8:128 active ready running
> `-+- policy='service-time 0' prio=9 status=enabled
>   `- 1:0:0:3 sde 8:64  active ready running
> 36f01faf000e5fd5b000009fc52cc8a5b dm-2 DELL    ,MD36xxf
> size=9.0T features='2 pg_init_retries 50' hwhandler='1 rdac' wp=rw
> |-+- policy='service-time 0' prio=14 status=active
> | `- 1:0:0:0 sdb 8:16  active ready running
> `-+- policy='service-time 0' prio=9 status=enabled
>   `- 8:0:0:0 sdf 8:80  active ready running
> 36f01faf000e5fd640000078752cd9374 dm-0 DELL    ,MD36xxf
> size=9.0T features='2 pg_init_retries 50' hwhandler='1 rdac' wp=rw
> |-+- policy='service-time 0' prio=14 status=active
> | `- 8:0:0:1 sdg 8:96  active ready running
> `-+- policy='service-time 0' prio=9 status=enabled
>   `- 1:0:0:1 sdc 8:32  active ready running
> 36f01faf000e5fd5b00000a5a55820464 dm-3 DELL    ,MD36xxf
> size=5.7T features='2 pg_init_retries 50' hwhandler='1 rdac' wp=rw
> |-+- policy='service-time 0' prio=14 status=active
> | `- 1:0:0:2 sdd 8:48  active ready running
> `-+- policy='service-time 0' prio=9 status=enabled
>   `- 8:0:0:2 sdh 8:112 active ready running
>
> When I select those IDs, it says 'The following LUNs are in use' (does
> it perhaps mean by multipath?), and to 'Approve operation', which I
> do, but it then fails with:
>
> "Error while executing action New SAN Storage Domain: Physical device
> initialization failed. Please check that the device is empty and
> accessible by the host."

This usually means the devices has partitions table, and lvm would not overwrite
the device.

You can check this by inspecting the devices with fdisk.

If you are sure that the devices are not used, you can wipe the start
of the devices
like this:

dd if=/dev/zero of=/dev/mapper/36f01faf000e5fd64000007d255820b3d bs=1M count=1

After that, you should be able to select the device for a storage domain.

Nir

>
> The storage is not mounted and is not being used by any other host.
> The error from the engine log is:
>
> ---------------------8<--------------------------
>
> 2016-03-05 21:50:47,326 INFO
> [org.ovirt.engine.core.bll.hostdeploy.VdsDeployBase] (VdsDeploy) []
> Stage: Termination
> 2016-03-05 21:51:21,460 INFO
> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetDeviceListVDSCommand]
> (default task-167) [] START, GetDeviceListVDSCommand(HostName =
> kvm-ldn-02, GetDeviceListVDSCommandParameters:{runAsync='true',
> hostId='d44741f9-00c9-45d2-a76d-9ea5bd2893e0', storageType='FCP',
> checkStatus='true', lunIds='[36f01faf000e5fd64000007d255820b3d]'}),
> log id: 67073545
> 2016-03-05 21:51:22,966 INFO
> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetDeviceListVDSCommand]
> (default task-167) [] FINISH, GetDeviceListVDSCommand, return:
> [LUNs:{id='36f01faf000e5fd64000007d255820b3d', physicalVolumeId='',
> volumeGroupId='', serial='SDELL_MD36xxf_3BD000S', lunMapping='3',
> vendorId='DELL', productId='MD36xxf', lunConnections='[]',
> deviceSize='5865', pvSize='0', vendorName='DELL',
> pathsDictionary='[sde=true, sdi=true]', pathsCapacity='[sde=5865,
> sdi=5865]', lunType='FCP', status='Used', diskId='null',
> diskAlias='null', storageDomainId='null', storageDomainName='null'}],
> log id: 67073545
> 2016-03-05 21:51:26,917 INFO
> [org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand]
> (default task-172) [71343e04] Running command:
> AddSANStorageDomainCommand internal: false. Entities affected :  ID:
> aaa00000-0000-0000-0000-123456789aaa Type: SystemAction group
> CREATE_STORAGE_DOMAIN with role type ADMIN
> 2016-03-05 21:51:26,935 INFO
> [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVGVDSCommand]
> (default task-172) [71343e04] START, CreateVGVDSCommand(HostName =
> kvm-ldn-02, CreateVGVDSCommandParameters:{runAsync='true',
> hostId='d44741f9-00c9-45d2-a76d-9ea5bd2893e0',
> storageDomainId='65fd9f6a-5674-43b2-99d7-18741be5943d',
> deviceList='[36f01faf000e5fd64000007d255820b3d]', force='true'}), log
> id: 45c41848
> 2016-03-05 21:51:28,069 ERROR
> [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVGVDSCommand]
> (default task-172) [71343e04] Failed in 'CreateVGVDS' method
> 2016-03-05 21:51:28,073 ERROR
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (default task-172) [71343e04] Correlation ID: null, Call Stack: null,
> Custom Event ID: -1, Message: VDSM kvm-ldn-02 command failed: Failed
> to initialize physical device:
> ("[u'/dev/mapper/36f01faf000e5fd64000007d255820b3d']",)
> 2016-03-05 21:51:28,073 INFO
> [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVGVDSCommand]
> (default task-172) [71343e04] Command
> 'org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVGVDSCommand' return
> value 'OneUuidReturnForXmlRpc:{status='StatusForXmlRpc [code=601,
> message=Failed to initialize physical device:
> ("[u'/dev/mapper/36f01faf000e5fd64000007d255820b3d']",)]'}'
>
> ---------------------8<--------------------------
>
> On the node, in the messages log, I get:
>
> ---------------------8<--------------------------
>
> Mar  5 22:18:53 kvm-ldn-02 multipathd: dm-4: remove map (uevent)
> Mar  5 22:18:53 kvm-ldn-02 multipathd: dm-4: remove map (uevent)
> Mar  5 22:19:11 kvm-ldn-02 kernel: device-mapper: table: 253:4:
> multipath: error getting device
> Mar  5 22:19:11 kvm-ldn-02 kernel: device-mapper: ioctl: error adding
> target to table
> Mar  5 22:19:11 kvm-ldn-02 multipathd: dm-4: remove map (uevent)
> Mar  5 22:19:11 kvm-ldn-02 multipathd: dm-4: remove map (uevent)
>
> ---------------------8<--------------------------
>
> Not sure why it is looking at dm-4 and dm-8, which don't exist (the
> symlinks point to dm-0 to dm-3 for the devices).
>
> What am I doing wrong here? Any help much appreciated.
>
> Thanks,
>
> Cam
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users