[ovirt-users] Adding another host to my cluster
Charles Tassell
ctassell at gmail.com
Thu May 12 23:55:56 EDT 2016
Hi Gervais,
Hmm, can you tar up the logfiles (/var/log/vdsm/* on the host you are
installing on) and put them somewhere to look at? Also, I found that
starting VDSM from the command line is useful as it sometimes spits out
error messages that don't show up in the logs. I think the command I
used was:
su -s /bin/bash vdsm
python /usr/share/vdsm/vdsm
My problem was that I customized the logging settings in /etc/vdsm/*conf
to try and tone down the debugging stuff and had a syntax error.
On 16-05-12 10:24 PM, Gervais de Montbrun wrote:
> Hi Charles,
>
> Thanks for the suggestion.
>
> I cleaned up again using the bash script from the
> recoving-from-failed-install link below, then reinstalled (yum install
> ovirt-hosted-engine-setup).
>
> I enabled NetworkManager and firewalld as you suggested. The install
> stops very early on with an error:
> [ ERROR ] Failed to execute stage 'Programs detection': hosted-engine
> cannot be deployed while NetworkManager is running, please stop and
> disable it before proceeding
>
> I disabled and stopped NetworkManager and tried again. Same result. :(
>
> Any more guesses?
>
> Cheers,
> Gervais
>
>
>
>> On May 12, 2016, at 9:08 PM, Charles Tassell <ctassell at gmail.com
>> <mailto:ctassell at gmail.com>> wrote:
>>
>> Hey Gervais,
>>
>> Try enabling NetworkManager and firewalld before doing the
>> hosted-engine --deploy. I have run into problems with oVirt trying
>> to perform tasks on hosts where firewalld is disabled, so maybe you
>> are running into a similar problem. Also, I think the setup script
>> will disable NetworkManager if it needs to. I know I didn't manually
>> disable it on any of the boxes I installed on.
>>
>> On 16-05-12 04:49 PM, users-request at ovirt.org
>> <mailto:users-request at ovirt.org> wrote:
>>> Message: 1
>>> Date: Thu, 12 May 2016 14:22:12 -0300
>>> From: Gervais de Montbrun <gervais at demontbrun.com
>>> <mailto:gervais at demontbrun.com>>
>>> To: Wee Sritippho <wee.s at forest.go.th <mailto:wee.s at forest.go.th>>
>>> Cc: users <users at ovirt.org <mailto:users at ovirt.org>>
>>> Subject: Re: [ovirt-users] Adding another host to my cluster
>>> Message-ID: <28B7FC74-5C52-4F60-B9F3-39A36621A7CA at demontbrun.com
>>> <mailto:28B7FC74-5C52-4F60-B9F3-39A36621A7CA at demontbrun.com>>
>>> Content-Type: text/plain; charset="utf-8"
>>>
>>> Hi Wee
>>> (and others)
>>>
>>> Thanks for the reply. I tried what you suggested, but I am in the
>>> exact same state. :-(
>>>
>>> I don't want to completely remove my hosted engine setup as it is
>>> working on the two other hosts in my cluster. I did not run the rm
>>> -rf stes listed here
>>> (https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-failed-install
>>> <https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-failed-install>)
>>> that would wipe my hosted_engine nfs mount. If you know that this is
>>> 100% necessary, please let me know.
>>>
>>> I did:
>>> hosted-engine --clean-metadata --force-cleanup --host-id=3
>>> run the bash script to remove all of the ovirt packages and config files
>>> reinstalled ovirt-hosted-engine-setup
>>> ran "hosted-engine --deploy"
>>>
>>> I'm back exactly where I started. Is there a way to run just the
>>> network configuration part of the deploy?
>>>
>>> Since the last attempt, I did upgrade my hosted engine and my
>>> cluster is now running oVirt 3.6.5.
>>>
>>> Cheers,
>>> Gervais
>>>
>>>
>>>
>>>> On May 12, 2016, at 11:50 AM, Wee Sritippho <wee.s at forest.go.th
>>>> <mailto:wee.s at forest.go.th>> wrote:
>>>>
>>>> Hi,
>>>>
>>>> I used to have a similar problem where one of my host can't be
>>>> deployed due to the absence of ovirtmgmt bridge. Simone said it's a
>>>> bug ( https://bugzilla.redhat.com/1323465
>>>> <https://bugzilla.redhat.com/1323465> ) which would be fixed in 3.6.6.
>>>>
>>>> This is what I've done to solve it:
>>>>
>>>> 1. In the web UI, set the failed host to maintenance.
>>>> 2. Remove it.
>>>> 3. In that host, run a script from
>>>> https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-failed-install
>>>> <https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-failed-install>
>>>> 4. Install ovirt-hosted-engine-setup again.
>>>> 5. Redeploy again.
>>>>
>>>> Hope that helps
>>>>
>>>> On 11 ??????? 2016 22 ?????? 48 ???? 58 ?????? GMT+07:00, Gervais
>>>> de Montbrun <gervais at demontbrun.com
>>>> <mailto:gervais at demontbrun.com>> wrote:
>>>> Hi Folks,
>>>>
>>>> I hate to reply to my own message, but I'm really hoping someone
>>>> can help me with my issue
>>>> http://lists.ovirt.org/pipermail/users/2016-May/039690.html
>>>> <http://lists.ovirt.org/pipermail/users/2016-May/039690.html>
>>>>
>>>> Does anyone have a suggestion for me? If there is any more
>>>> information that I can provide that would help you to help me,
>>>> please advise.
>>>>
>>>> Cheers,
>>>> Gervais
>>>>
>>>>
>>>>
>>>>> On May 9, 2016, at 1:42 PM, Gervais de Montbrun
>>>>> <gervais at demontbrun.com <mailto:gervais at demontbrun.com>
>>>>> <mailto:gervais at demontbrun.com <mailto:gervais at demontbrun.com>>>
>>>>> wrote:
>>>>>
>>>>> Hi All,
>>>>>
>>>>> I'm trying to add a third host into my oVirt cluster. I have
>>>>> hosted engine setup on the first two. It's failing to finish the
>>>>> hosted-engine --deploy on this third host. I wiped the server and
>>>>> did a CentOS 7 minimum install and ran it again to have a clean
>>>>> machine.
>>>>>
>>>>> My setup:
>>>>> CentOS 7 clean install
>>>>> yum install -y
>>>>> http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm
>>>>> <http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm>
>>>>> yum install -y ovirt-hosted-engine-setup
>>>>> yum upgrade -y && reboot
>>>>> systemctl disable NetworkManager ; systemctl stop NetworkManager ;
>>>>> systemctl disable firewalld ; systemctl stop firewalld
>>>>> hosted-engine --deploy
>>>>>
>>>>> hosted-engine --deploy always throws an error:
>>>>> [ ERROR ] The VDSM host was found in a failed state. Please check
>>>>> engine and bootstrap installation logs.
>>>>> [ ERROR ] Unable to add Cultivar2 to the manager
>>>>> and then echo's
>>>>> [ INFO ] Waiting for VDSM hardware info
>>>>> ...
>>>>> [ ERROR ] Failed to execute stage 'Closing up': VDSM did not start
>>>>> within 120 seconds
>>>>> [ INFO ] Stage: Clean up
>>>>> [ INFO ] Generating answer file
>>>>> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20160509131103.conf'
>>>>> [ INFO ] Stage: Pre-termination
>>>>> [ INFO ] Stage: Termination
>>>>> [ ERROR ] Hosted Engine deployment failed: this system is not
>>>>> reliable, please check the issue, fix and redeploy
>>>>> Log file is located at
>>>>> /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160509130658-qb8ev0.log
>>>>>
>>>>> Full output of hosted-engine --deploy included in the attached zip
>>>>> file.
>>>>> I've also included vdsm.log (There is more than one tries worth of
>>>>> tries in there).
>>>>> You'll also find the
>>>>> ovirt-hosted-engine-setup-20160509130658-qb8ev0.log listed above.
>>>>>
>>>>> This is my "test" setup. Cultivar0 is my first host and my nfs
>>>>> server for storage. I have two hosts in the setup already and
>>>>> everything is working fine. The host does show up in the oVirt
>>>>> admin, but shows "Installed Failed"
>>>>> <PastedGraphic-1.png>
>>>>>
>>>>> Trying to reinstall from within the interface just fails again.
>>>>>
>>>>> The ovirt bridge interface is not configured and there are no
>>>>> config files in /etc/sysconfi/network-scripts related to ovirt.
>>>>>
>>>>> OS:
>>>>> [root at cultivar2 ovirt-hosted-engine-setup]# cat /etc/redhat-release
>>>>> CentOS Linux release 7.2.1511 (Core)
>>>>>
>>>>> [root at cultivar2 ovirt-hosted-engine-setup]# uname -a
>>>>> Linux cultivar2.grove.silverorange.com
>>>>> <http://cultivar2.grove.silverorange.com>
>>>>> <http://cultivar2.grove.silverorange.com/>
>>>>> 3.10.0-327.13.1.el7.x86_64 #1 SMP Thu Mar 31 16:04:38 UTC 2016
>>>>> x86_64 x86_64 x86_64 GNU/Linux
>>>>>
>>>>> Versions:
>>>>> [root at cultivar2 ovirt-hosted-engine-setup]# rpm -qa | grep -i ovirt
>>>>> libgovirt-0.3.3-1.el7_2.1.x86_64
>>>>> ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch
>>>>> ovirt-host-deploy-1.4.1-1.el7.centos.noarch
>>>>> ovirt-vmconsole-1.0.0-1.el7.centos.noarch
>>>>> ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch
>>>>> ovirt-release36-007-1.noarch
>>>>> ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch
>>>>> ovirt-setup-lib-1.0.1-1.el7.centos.noarch
>>>>> ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch
>>>>> [root at cultivar2 ovirt-hosted-engine-setup]#
>>>>> [root at cultivar2 ovirt-hosted-engine-setup]#
>>>>> [root at cultivar2 ovirt-hosted-engine-setup]#
>>>>> [root at cultivar2 ovirt-hosted-engine-setup]# rpm -qa | grep -i virt
>>>>> libvirt-daemon-driver-secret-1.2.17-13.el7_2.4.x86_64
>>>>> virt-viewer-2.0-6.el7.x86_64
>>>>> libgovirt-0.3.3-1.el7_2.1.x86_64
>>>>> libvirt-daemon-kvm-1.2.17-13.el7_2.4.x86_64
>>>>> ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch
>>>>> fence-virt-0.3.2-2.el7.x86_64
>>>>> virt-what-1.13-6.el7.x86_64
>>>>> libvirt-python-1.2.17-2.el7.x86_64
>>>>> libvirt-daemon-1.2.17-13.el7_2.4.x86_64
>>>>> libvirt-daemon-config-nwfilter-1.2.17-13.el7_2.4.x86_64
>>>>> libvirt-lock-sanlock-1.2.17-13.el7_2.4.x86_64
>>>>> libvirt-daemon-driver-nodedev-1.2.17-13.el7_2.4.x86_64
>>>>> libvirt-daemon-driver-network-1.2.17-13.el7_2.4.x86_64
>>>>> libvirt-daemon-driver-storage-1.2.17-13.el7_2.4.x86_64
>>>>> ovirt-host-deploy-1.4.1-1.el7.centos.noarch
>>>>> virt-v2v-1.28.1-1.55.el7.centos.2.x86_64
>>>>> ovirt-vmconsole-1.0.0-1.el7.centos.noarch
>>>>> ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch
>>>>> libvirt-client-1.2.17-13.el7_2.4.x86_64
>>>>> libvirt-daemon-driver-nwfilter-1.2.17-13.el7_2.4.x86_64
>>>>> ovirt-release36-007-1.noarch
>>>>> libvirt-daemon-driver-interface-1.2.17-13.el7_2.4.x86_64
>>>>> libvirt-daemon-driver-qemu-1.2.17-13.el7_2.4.x86_64
>>>>> ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch
>>>>> ovirt-setup-lib-1.0.1-1.el7.centos.noarch
>>>>> ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch
>>>>>
>>>>> I also have a series of stuck tasks that I can't clear related to
>>>>> the host that can't be added... This is a secondary issue and I
>>>>> don't want to get off track, but they look like this:
>>>>> <PastedGraphic-2.png>
>>>>>
>>>>> I'd appreciate any help that can be offered.
>>>>>
>>>>> Cheers,
>>>>> Gervais
>>>>>
>>>>>
>>>>> Gervais de Montbrun
>>>>> Systems Administrator / silverorange Inc.
>>>>>
>>>>> Phone +1 902 367 4532 ext. 104
>>>>> <tel:%2B1%20902%20367%204532%20ext.%20104> <tel:+1 902 367 4532
>>>>> ext. 104 <tel:%2B1%20902%20367%204532%20ext.%20104>>
>>>>> Mobile +1 902 978 0009 <tel:%2B1%20902%20978%200009> <tel:+1 902
>>>>> 978 0009 <tel:%2B1%20902%20978%200009>>
>>>>>
>>>>> <hosted-engine--deploy-logs.zip>
>>>>
>>>>
>>>> Users mailing list
>>>> Users at ovirt.org <mailto:Users at ovirt.org>
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>> <http://lists.ovirt.org/mailman/listinfo/users>
>>>>
>>>> --
>>>> Wee
>>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at ovirt.org <mailto:Users at ovirt.org>
>> http://lists.ovirt.org/mailman/listinfo/users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20160513/97ee2f13/attachment-0001.html>
More information about the Users
mailing list