[ovirt-users] How to setup host network to link ovirtmgmt with eth0 automatically?
Ondřej Svoboda
ondrej at svobodasoft.cz
Tue May 24 12:05:04 UTC 2016
Hi,
are using the Open vSwitch hook intentionally? If not, you |yum remove
vdsm-hook-ovs for a while. What is your exact VDSM version?
|
Thanks, Ondra
On 24.5.2016 11:47, Kai Kang wrote:
> Hi,
>
> I checked vdsm.log, it show error:
>
> jsonrpc.Executor/0::DEBUG::2016-05-24
> 09:46:04,056::utils::671::root::(execCmd) /usr/bin/taskset --cpu-list
> 0-7 /usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs (cwd None)
> jsonrpc.Executor/0::DEBUG::2016-05-24
> 09:46:04,136::utils::689::root::(execCmd) FAILED: <err> = 'Traceback
> (most recent call last):\n File
> "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72, in
> <module>\n main()\n File
> "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 66, in
> main\n
> stats[\'network\'].update(ovs_networks_stats(stats[\'network\']))\nKeyError:
> \'network\'\n\n'; <rc> = 2
> jsonrpc.Executor/0::INFO::2016-05-24
> 09:46:04,136::hooks::98::root::(_runHooksDir) Traceback (most recent
> call last):
> File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72,
> in <module>
> main()
> File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 66,
> in main
> stats['network'].update(ovs_networks_stats(stats['network']))
> KeyError: 'network'
>
>
> I'm checking what wrong with it.
>
> Thanks,
> Kai
>
>
>
> On Tue, May 24, 2016 at 3:57 PM, Kai Kang <kai.7.kang at gmail.com
> <mailto:kai.7.kang at gmail.com>> wrote:
>
> And network configurations on node:
>
> [root at ovirt-node] # brctl show
> bridge name bridge id STP enabled interfaces
> docker0 8000.0242ae1de711 no
> ovirtmgmt 8000.001320ff73aa no eth0
>
> [root at ovirt-node] # ifconfig -a
> docker0 Link encap:Ethernet HWaddr 02:42:ae:1d:e7:11
> inet addr:172.17.0.1 Bcast:0.0.0.0 Mask:255.255.0.0
> UP BROADCAST MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>
> eth0 Link encap:Ethernet HWaddr 00:13:20:ff:73:aa
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:6331 errors:0 dropped:0 overruns:0 frame:0
> TX packets:2866 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:762182 (744.3 KiB) TX bytes:210611 (205.6 KiB)
> Interrupt:20 Memory:d1100000-d1120000
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> inet6 addr: ::1/128 Scope:Host
> UP LOOPBACK RUNNING MTU:65536 Metric:1
> RX packets:36 errors:0 dropped:0 overruns:0 frame:0
> TX packets:36 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:2478 (2.4 KiB) TX bytes:2478 (2.4 KiB)
>
> ovirtmgmt Link encap:Ethernet HWaddr 00:13:20:ff:73:aa
> inet addr:128.224.165.170 Bcast:128.224.165.255
> Mask:255.255.255.0
> inet6 addr: fe80::213:20ff:feff:73aa/64 Scope:Link
> inet6 addr: 11:2233:4455:6677:213:20ff:feff:73aa/64
> Scope:Global
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:6295 errors:0 dropped:6 overruns:0 frame:0
> TX packets:2831 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:644421 (629.3 KiB) TX bytes:177616 (173.4 KiB)
>
> sit0 Link encap:UNSPEC HWaddr
> 00-00-00-00-32-33-33-00-00-00-00-00-00-00-00-00
> NOARP MTU:1480 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>
> wlan0 Link encap:Ethernet HWaddr 80:86:f2:8b:1d:cf
> BROADCAST MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>
>
> Thanks,
> Kai
>
>
>
> On Tue, May 24, 2016 at 3:36 PM, Kai Kang <kai.7.kang at gmail.com
> <mailto:kai.7.kang at gmail.com>> wrote:
>
> Hi,
>
> When I install a host, it fails with:
>
> 2016-05-24 07:00:01,749 ERROR
> [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
> (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Host 'node3' is
> set to Non-Operational, it is missing the following networks:
> 'ovirtmgmt'
> 2016-05-24 07:00:01,781 WARN
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Correlation ID:
> 1bf36cd4, Job ID: db281e8f-67cc-441a-b44c-90b135e509bd, Call
> Stack: null, Custom Event ID: -1, Message: Host node3 does not
> comply with the cluster Default networks, the following
> networks are missing on host: 'ovirtmgmt'
>
> After I click the "Hosts" -> subtab "Network Interfaces" ->
> "Setup Host Networks" on the web ui and drag ovirtmgmt to
> "Assigned Logical" to link with eth0, then activate host
> "node3" successfully.
>
> My question is how to make such manual operation
> automatically? Then I can run some automatic tests.
>
> Thanks a lot.
>
> --Kai
>
>
>
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20160524/61a0a270/attachment-0001.html>
More information about the Users
mailing list