[ovirt-users] hosted-engine cant access engine appliance
Simone Tiraboschi
stirabos at redhat.com
Tue Nov 8 09:43:13 UTC 2016
On Tue, Nov 8, 2016 at 9:35 AM, Steffen Nolden <
steffen.nolden at alumni.fh-aachen.de> wrote:
> Hello Florian,
>
> there is no problem to reslove the FQDN
>
Can you please attach also VDSM logs fro the relevant time frame?
> [nolden at oVirtNode01 ~]$ nslookup oVirtEngine.com
> Server: 192.168.122.1
> Address: 192.168.122.1#53
>
> Name: oVirtEngine.com
> Address: 192.168.122.201
>
> The '/etc/hosts' file of each host is configured to resolve the name.
>
> I tried it with stopped firewall,
>
> [nolden at oVirtNode01 ~]$ sudo systemctl stop firewalld
> [nolden at oVirtNode01 ~]$ sudo systemctl status firewalld
> ● firewalld.service - firewalld - dynamic firewall daemon
> Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled;
> vendor preset: enabled)
> Active: inactive (dead) since Di 2016-11-08 09:10:46 CET; 3s ago
> Process: 724 ExecStart=/usr/sbin/firewalld --nofork --nopid
> $FIREWALLD_ARGS (code=exited, status=0/SUCCESS)
> Main PID: 724 (code=exited, status=0/SUCCESS)
>
> but i got the same error!
>
>
> Am 04.11.2016 um 15:50 schrieb Florian Nolden:
>
> Hello Steffen,
>
> can your nodes resolve the FQDN "ovirtengine.com" to the hosted engine
> ip ( nslookup ovirtengine.com) ?
> If that works have you tried to disable the firewall temporarily?
>
> 2016-11-04 14:11 GMT+01:00 Steffen Nolden <steffen.nolden at alumni.fh-
> aachen.de>:
>
>> Hello,
>>
>> i tried to deploy hosted-engine on a testing environment. First of all i
>> tried to deploy with the option
>>
>> "Automatically execute engine-setup on the engine appliance on first
>> boot (Yes, No)[Yes]? Yes"
>>
>> but it got stuck.
>>
>> [ INFO ] Running engine-setup on the appliance
>> [ ERROR ] Engine setup got stuck on the appliance
>> [ ERROR ] Failed to execute stage 'Closing up': Engine setup is stalled
>> on the appliance since 600 seconds ago. Please check its log on the
>> appliance.
>> [ INFO ] Stage: Clean up
>> [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-
>> setup/answers/answers-20161104112913.conf'
>> [ INFO ] Stage: Pre-termination
>> [ INFO ] Stage: Termination
>> [ ERROR ] Hosted Engine deployment failed: this system is not reliable,
>> please check the issue,fix and redeploy
>> Log file is located at /var/log/ovirt-hosted-engine-s
>> etup/ovirt-hosted-engine-setup-20161104110104-kyhq1e.log
>>
>> Next try i said 'No' and i tried to execute it myself. But i can't access
>> the engine appliance.
>>
>> [nolden at oVirtNode01 ~]$ sudo hosted-engine --console
>> /usr/share/vdsm/vdsClient.py:33: DeprecationWarning: vdscli uses
>> xmlrpc. since ovirt 3.6 xmlrpc is deprecated, please use vdsm.jsonrpcvdscli
>> from vdsm import utils, vdscli, constants
>> The engine VM is running on this host
>> Verbunden mit der Domain: HostedEngine
>> Escape-Zeichen ist ^]
>> Fehler: Interner Fehler: Charakter-Einheit console0 verwendet nicht
>> ein PTY
>>
>> Additionally i can't ping or access the engine appliance via ssh.
>>
>> Did i forget to install a packege or configure something?
>>
>> Below my infrastructure and configs. Attached the log file.
>>
>>
>> Thanks for help.
>>
>>
>>
>> My infrastructure is a nestedVM system:
>> All systems have nested visualization activated
>>
>> HW with LinuxMint x86_64;
>> - VM with CentOS-7-x86_64; 24GB Ram; 7 cores;
>> - Nested VM with CentOS-7-x86_64; 12288GB Ram; 4 cores; Hostname:
>> oVirtNode01.com (192.168.122.101): Here i deploy hosted-engine, Hostname:
>> oVirtEngine.com (192.168.122.201)
>> - Nested VM with CentOS-7-x86_64; 4096GB Ram; 1 cores; Hostname:
>> oVirtNode02.com (192.168.122.102):
>> - Nested VM with CentOS-7-x86_64; 4096GB Ram; 1 cores; Hostname:
>> oVirtNode03.com (192.168.122.103):
>>
>> All three NestedVMs are updated, have installed the ovirt-release40.rpm.
>> Additional installed:
>> screen (4.1.0), ovirt-hosted-engine-setup (2.0.2.2), vdsm-gluster
>> (4.18.13), bridge-utils (1.5),
>> vdsm (4.18.13), vdsm-cli (4.18.13), glusterfs-server (3.7.16), samba.
>>
>> First NestedVM additional installed ovirt-engine-appliance
>> 4.0-20160928.1.el7.centos
>>
>> The three VMs building a glusterfs volume "engine" 3 replica, with the
>> options...
>>
>> Volume Name: engine
>> Type: Replicate
>> Volume ID: e92849b7-af3b-4ccd-bd0d-69a5ab3b6214
>> Status: Started
>> Number of Bricks: 1 x 3 = 3
>> Transport-type: tcp
>> Bricks:
>> Brick1: oVirtNode01.com:/gluster/engine/brick1
>> Brick2: oVirtNode02.com:/gluster/engine/brick1
>> Brick3: oVirtNode03.com:/gluster/engine/brick1
>> Options Reconfigured:
>> auth.allow: 192.168.122.*
>> storage.owner-gid: 36
>> storage.owner-uid: 36
>> performance.readdir-ahead: on
>>
>> ## Session 1 (hosted-engine deploy without automatically execute
>> engine-setup)
>> [nolden at oVirtNode01 ~]$ sudo hosted-engine --deploy
>> /usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/storage_backends.py:15:
>> DeprecationWarning: vdscli uses xmlrpc. since ovirt 3.6 xmlrpc is
>> deprecated, please use vdsm.jsonrpcvdscli
>> import vdsm.vdscli
>> [ INFO ] Stage: Initializing
>> [ INFO ] Generating a temporary VNC password.
>> [ INFO ] Stage: Environment setup
>> During customization use CTRL-D to abort.
>> Continuing will configure this host for serving as hypervisor
>> and create a VM where you have to install the engine afterwards.
>> Are you sure you want to continue? (Yes, No)[Yes]:
>> [ INFO ] Hardware supports virtualization
>> Configuration files: []
>> Log file: /var/log/ovirt-hosted-engine-s
>> etup/ovirt-hosted-engine-setup-20161104123834-chwikf.log
>> Version: otopi-1.5.2 (otopi-1.5.2-1.el7.centos)
>> [ INFO ] Stage: Environment packages setup
>> [ INFO ] Stage: Programs detection
>> [ INFO ] Stage: Environment setup
>> [ INFO ] Generating libvirt-spice certificates
>> [ INFO ] Stage: Environment customization
>>
>> --== STORAGE CONFIGURATION ==--
>>
>> Please specify the storage you would like to use (glusterfs,
>> iscsi, fc, nfs3, nfs4)[nfs3]: glusterfs
>> [ INFO ] Please note that Replica 3 support is required for the shared
>> storage.
>> Please specify the full shared storage connection path to use
>> (example: host:/path): oVirtNode01.com:/engine
>> [ INFO ] GlusterFS replica 3 Volume detected
>> [ INFO ] Installing on first host
>> [ INFO ] GlusterFS replica 3 Volume detected
>>
>> --== SYSTEM CONFIGURATION ==--
>>
>>
>> --== NETWORK CONFIGURATION ==--
>>
>> iptables was detected on your computer, do you wish setup to
>> configure it? (Yes, No)[Yes]: No
>> Please indicate a pingable gateway IP address [192.168.122.1]:
>> Please indicate a nic to set ovirtmgmt bridge on: (eth0) [eth0]:
>>
>> --== VM CONFIGURATION ==--
>>
>> Booting from cdrom on RHEL7 is ISO image based only, as cdrom
>> passthrough is disabled (BZ760885)
>> Please specify the device to boot the VM from (choose disk for
>> the oVirt engine appliance)
>> (cdrom, disk, pxe) [disk]:
>> Please specify the console type you would like to use to
>> connect to the VM (vnc, spice) [vnc]:
>> [ INFO ] Detecting available oVirt engine appliances
>> The following appliance have been found on your system:
>> [1] - The oVirt Engine Appliance image (OVA) -
>> 4.0-20160928.1.el7.centos
>> [2] - Directly select an OVA file
>> Please select an appliance (1, 2) [1]:
>> [ INFO ] Verifying its sha1sum
>> [ INFO ] Checking OVF archive content (could take a few minutes
>> depending on archive size)
>> [ INFO ] Checking OVF XML content (could take a few minutes depending on
>> archive size)
>> [WARNING] OVF does not contain a valid image description, using default.
>> Would you like to use cloud-init to customize the appliance on
>> the first boot (Yes, No)[Yes]?
>> Would you like to generate on-fly a cloud-init ISO image (of
>> no-cloud type)
>> or do you have an existing one (Generate, Existing)[Generate]?
>> Please provide the FQDN you would like to use for the engine
>> appliance.
>> Note: This will be the FQDN of the engine VM you are now going
>> to launch,
>> it should not point to the base host or to any other existing
>> machine.
>> Engine VM FQDN: (leave it empty to skip): []: oVirtEngine.com
>> Automatically execute engine-setup on the engine appliance on
>> first boot (Yes, No)[Yes]? No
>> Please provide the domain name you would like to use for the
>> engine appliance.
>> Engine VM domain: [com]
>> Enter root password that will be used for the engine appliance
>> (leave it empty to skip):
>> Confirm appliance root password:
>> The following CPU types are supported by this host:
>> - model_SandyBridge: Intel SandyBridge Family
>> - model_Westmere: Intel Westmere Family
>> - model_Nehalem: Intel Nehalem Family
>> - model_Penryn: Intel Penryn Family
>> - model_Conroe: Intel Conroe Family
>> Please specify the CPU type to be used by the VM
>> [model_SandyBridge]:
>> Please specify the number of virtual CPUs for the VM (Defaults
>> to appliance OVF value): [4]: 3
>> [WARNING] Minimum requirements for disk size not met
>> You may specify a unicast MAC address for the VM or accept a
>> randomly generated default [00:16:3e:2a:82:17]:
>> Please specify the memory size of the VM in MB (Defaults to
>> maximum available): [10880]: 8144
>> How should the engine VM network be configured (DHCP,
>> Static)[DHCP]? Static
>> Please enter the IP address to be used for the engine VM
>> [192.168.122.2]: 192.168.122.201
>> [ INFO ] The engine VM will be configured to use 192.168.122.201/24
>> Please provide a comma-separated list (max 3) of IP addresses
>> of domain name servers for the engine VM
>> Engine VM DNS (leave it empty to skip) [192.168.122.1]:
>> Add lines for the appliance itself and for this host to
>> /etc/hosts on the engine VM?
>> Note: ensuring that this host could resolve the engine VM
>> hostname is still up to you
>> (Yes, No)[No] Yes
>>
>> --== HOSTED ENGINE CONFIGURATION ==--
>>
>> Enter engine admin password:
>> Confirm engine admin password:
>> Enter the name which will be used to identify this host inside
>> the Administrator Portal [hosted_engine_1]:
>> Please provide the name of the SMTP server through which we
>> will send notifications [localhost]:
>> Please provide the TCP port number of the SMTP server [25]:
>> Please provide the email address from which notifications will
>> be sent [root at localhost]:
>> Please provide a comma-separated list of email addresses which
>> will get notifications [root at localhost]:
>> [ INFO ] Stage: Setup validation
>>
>> --== CONFIGURATION PREVIEW ==--
>>
>> Bridge interface : eth0
>> Engine FQDN : oVirtEngine.com
>> Bridge name : ovirtmgmt
>> Host address : oVirtNode01
>> SSH daemon port : 22
>> Gateway address : 192.168.122.1
>> Host name for web application : hosted_engine_1
>> Storage Domain type : glusterfs
>> Host ID : 1
>> Image size GB : 10
>> Storage connection : oVirtNode01.com:/engine
>> Console type : vnc
>> Memory size MB : 8144
>> MAC address : 00:16:3e:2a:82:17
>> Boot type : disk
>> Number of CPUs : 3
>> OVF archive (for disk boot) :
>> /usr/share/ovirt-engine-appliance/ovirt-engine-appliance-4.0
>> -20160928.1.el7.centos.ova
>> Appliance version : 4.0-20160928.1.el7.centos
>> CPU Type : model_SandyBridge
>>
>> Please confirm installation settings (Yes, No)[Yes]:
>> [ INFO ] Stage: Transaction setup
>> ...
>> [ INFO ] Stage: Closing up
>> The following network ports should be opened:
>> tcp:5900
>> tcp:5901
>> tcp:9090
>> udp:5900
>> udp:5901
>> An example of the required configuration for iptables can be
>> found at:
>> /etc/ovirt-hosted-engine/iptables.example
>> In order to configure firewalld, copy the files from
>> /etc/ovirt-hosted-engine/firewalld to /etc/firewalld/services
>> and execute the following commands:
>> firewall-cmd -service hosted-cockpit
>> firewall-cmd -service hosted-console
>> [ INFO ] Creating VM
>> You can now connect to the VM with the following command:
>> hosted-engine --console
>> You can also graphically connect to the VM from your system
>> with the following command:
>> remote-viewer vnc://oVirtNode01:5900
>> Use temporary password "2263CpET" to connect to vnc console.
>> Please ensure that your Guest OS is properly configured to
>> support serial console according to your distro documentation.
>> Follow http://www.ovirt.org/Serial_Co
>> nsole_Setup#I_need_to_access_the_console_the_old_way for more info.
>> If you need to reboot the VM you will need to start it manually
>> using the command:
>> hosted-engine --vm-start
>> You can then set a temporary password using the command:
>> hosted-engine --add-console-password
>> Please install and setup the engine in the VM.
>> You may also be interested in installing
>> ovirt-guest-agent-common package in the VM.
>>
>>
>> The VM has been rebooted.
>> To continue please install oVirt-Engine in the VM
>> (Follow http://www.ovirt.org/Quick_Start_Guide for more info).
>>
>> Make a selection from the options below:
>> (1) Continue setup - oVirt-Engine installation is ready and
>> ovirt-engine service is up
>> (2) Abort setup
>> (3) Power off and restart the VM
>> (4) Destroy VM and abort setup
>>
>> (1, 2, 3, 4)[1]:
>> ## Session 2
>> [nolden at oVirtNode01 ~]$ sudo hosted-engine --console
>> /usr/share/vdsm/vdsClient.py:33: DeprecationWarning: vdscli uses xmlrpc.
>> since ovirt 3.6 xmlrpc is deprecated, please use vdsm.jsonrpcvdscli
>> from vdsm import utils, vdscli, constants
>> The engine VM is running on this host
>> Verbunden mit der Domain: HostedEngine
>> Escape-Zeichen ist ^]
>> Fehler: Interner Fehler: Charakter-Einheit console0 verwendet nicht ein
>> PTY
>> [nolden at oVirtNode01 ~]$ ssh root at oVirtEngine.com
>> ssh: connect to host ovirtengine.com port 22: No route to host
>>
>> ## Back to session 1
>> ...
>> (1, 2, 3, 4)[1]: 1
>>
>> Checking for oVirt-Engine status at oVirtEngine.com...
>> [ INFO ] Engine is still unreachable
>> oVirt-Engine health status page is not yet reachable.
>>
>>
>> The VM has been rebooted.
>> To continue please install oVirt-Engine in the VM
>> (Follow http://www.ovirt.org/Quick_Start_Guide for more info).
>>
>> Make a selection from the options below:
>> (1) Continue setup - oVirt-Engine installation is ready and
>> ovirt-engine service is up
>> (2) Abort setup
>> (3) Power off and restart the VM
>> (4) Destroy VM and abort setup
>>
>> (1, 2, 3, 4)[1]: 2
>> [ ERROR ] Failed to execute stage 'Closing up': Setup aborted by user
>> [ INFO ] Stage: Clean up
>> [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-
>> setup/answers/answers-20161104130223.conf'
>> [ INFO ] Stage: Pre-termination
>> [ INFO ] Stage: Termination
>> [ ERROR ] Hosted Engine deployment failed: this system is not reliable,
>> please check the issue,fix and redeploy
>> Log file is located at /var/log/ovirt-hosted-engine-s
>> etup/ovirt-hosted-engine-setup-20161104123834-chwikf.log
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20161108/da067e17/attachment-0001.html>
More information about the Users
mailing list