[ovirt-users] OVA import of FC21 VM hangs during virt-v2v conversion?
Michal Skrivanek
michal.skrivanek at redhat.com
Wed Nov 16 07:06:29 UTC 2016
> On 7 Nov 2016, at 22:16, Derek Atkins <derek at ihtfp.com> wrote:
>
> Hi,
>
> My last VM imported in 2 minutes. This one has been sitting for three
> hours. I think this is a bug.
well, some time it does take a long time. Are you sure it was hung?
No I/O going on?
adding libguestfs list
Thanks,
michal
>
> Just in case it helps, here's a larger piece of the virt-v2v log
> (see the end)
>
> -derek
>
> On Mon, November 7, 2016 12:54 pm, Derek Atkins wrote:
>> Hi,
>>
>> I've successfully imported several VMs already, so I thought I had the
>> process down. Each import completed relatively quickly. So that's why
>> this one was such a surprise.
>>
>> I've got a Fedora 21 VM packaged into an OVA. I copy it to my ovirt
>> host and then [Virtual Machines] -> Import -> [OVA] and select the ova
>> file. Follow the process, assign the correct storage location, and let
>> it go. Usually it takes only a few minutes, but it's been sitting in
>> the conversion process for over 20 minutes already (multiple attempts
>> end in the same place). It's only a 4GB disk; the other imports were
>> all around the same size and took significantly longer.
>>
>> I tried running virt-v2v by hand:
>>
>> LIBGUESTFS_BACKEND=direct virt-v2v -v -x -i ova fedora21.ova -of raw -o
>> null
>>
>> and it hung here:
>>
>> guestfsd: main_loop: new request, len 0x28
>> guestfsd: main_loop: proc 26 (aug_close) took 0.03 seconds
>> libguestfs: trace: v2v: aug_close = 0
>> libguestfs: trace: v2v: selinux_relabel
>> "/etc/selinux/targeted/contexts/files/file_contexts" "/" "force:true"
>> guestfsd: main_loop: new request, len 0x6c
>> commandrvf: stdout=n stderr=y flags=0x0
>> commandrvf: setfiles -F -e /sysroot/dev -e /sysroot/proc -e
>> /sysroot/selinux -e /sysroot/sys -r /sysroot -q
>> /sysroot/etc/selinux/targeted/contexts/files/file_contexts /sysroot/
>> Can't stat exclude path "/sysroot/selinux", No such file or directory -
>> ignoring.
>> ^C
>>
>> Any ideas why this VM is different from all the other VMs?
>>
>> -derek
>
> [snip]
> installed kernel packages in this guest:
> (kernel-core, 3.17.8-300.fc21, x86_64,
> /boot/vmlinuz-3.17.8-300.fc21.x86_64,
> /boot/initramfs-3.17.8-300.fc21.x86_64.img, virtio=true, xen=false,
> debug=false)
> (kernel-core, 3.17.4-301.fc21, x86_64,
> /boot/vmlinuz-3.17.4-301.fc21.x86_64,
> /boot/initramfs-3.17.4-301.fc21.x86_64.img, virtio=true, xen=false,
> debug=false)
> libguestfs: trace: v2v: glob_expand "/vmlinuz-*"
> guestfsd: main_loop: new request, len 0x3c
> guestfsd: main_loop: proc 113 (glob_expand) took 0.00 seconds
> libguestfs: trace: v2v: glob_expand = []
> libguestfs: trace: v2v: glob_expand "/boot/vmlinuz-*"
> guestfsd: main_loop: new request, len 0x40
> guestfsd: main_loop: proc 113 (glob_expand) took 0.00 seconds
> libguestfs: trace: v2v: glob_expand =
> ["/boot/vmlinuz-0-rescue-aebaf0a54c334c40a3f2a001266b032e",
> "/boot/vmlinuz-3.17.4-301.fc21.x86_64",
> "/boot/vmlinuz-3.17.8-300.fc21.x86_64"]
> libguestfs: trace: v2v: glob_expand "/boot/kernel-*"
> guestfsd: main_loop: new request, len 0x40
> guestfsd: main_loop: proc 113 (glob_expand) took 0.00 seconds
> libguestfs: trace: v2v: glob_expand = []
> libguestfs: trace: v2v: exists "/sbin/grubby"
> guestfsd: main_loop: new request, len 0x38
> libguestfs: trace: v2v: exists = 1
> libguestfs: trace: v2v: command "grubby --default-kernel"
> guestfsd: main_loop: proc 36 (exists) took 0.00 seconds
> guestfsd: main_loop: new request, len 0x4c
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: mount --bind /dev /sysroot/dev
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: mount --bind /dev/pts /sysroot/dev/pts
> mount: mount point /sysroot/dev/pts does not exist
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: mount --bind /proc /sysroot/proc
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: mount --bind /sys/fs/selinux /sysroot/selinux
> mount: mount point /sysroot/selinux does not exist
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: mount --bind /sys /sysroot/sys
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: mount --bind /sys/fs/selinux /sysroot/sys/fs/selinux
> mount: mount point /sysroot/sys/fs/selinux does not exist
> renaming /sysroot/etc/resolv.conf to /sysroot/etc/bojotzks
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: cp /etc/resolv.conf /sysroot/etc/resolv.conf
> commandrvf: stdout=y stderr=y flags=0x40000
> commandrvf: grubby --default-kernel
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: umount /sysroot/sys
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: umount /sysroot/proc
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: umount /sysroot/dev
> renaming /sysroot/etc/bojotzks to /sysroot/etc/resolv.conf
> guestfsd: main_loop: proc 50 (command) took 0.13 seconds
> libguestfs: trace: v2v: command = "/boot/vmlinuz-3.17.8-300.fc21.x86_64\n"
> libguestfs: trace: v2v: statns "/boot/vmlinuz-3.17.8-300.fc21.x86_64"
> guestfsd: main_loop: new request, len 0x50
> guestfsd: main_loop: proc 421 (statns) took 0.00 seconds
> libguestfs: trace: v2v: statns = <struct guestfs_statns = st_dev: 2049,
> st_ino: 340, st_mode: 33261, st_nlink: 1, st_uid: 0, st_gid: 0, st_rdev:
> 0, st_size: 5757864, st_blksize: 4096, st_blocks: 11248, st_atime_sec:
> 1420760440, st_atime_nsec: 0, st_mtime_sec: 1420760440, st_mtime_nsec: 0,
> st_ctime_sec: 1421863850, st_ctime_nsec: 600025468, st_spare1: 0,
> st_spare2: 0, st_spare3: 0, st_spare4: 0, st_spare5: 0, st_spare6: 0, >
> libguestfs: trace: v2v: statns
> "/boot/vmlinuz-0-rescue-aebaf0a54c334c40a3f2a001266b032e"
> guestfsd: main_loop: new request, len 0x64
> guestfsd: main_loop: proc 421 (statns) took 0.00 seconds
> libguestfs: trace: v2v: statns = <struct guestfs_statns = st_dev: 2049,
> st_ino: 23, st_mode: 33261, st_nlink: 1, st_uid: 0, st_gid: 0, st_rdev: 0,
> st_size: 5751144, st_blksize: 4096, st_blocks: 11240, st_atime_sec:
> 1421862777, st_atime_nsec: 612123495, st_mtime_sec: 1421862777,
> st_mtime_nsec: 801108478, st_ctime_sec: 1421862777, st_ctime_nsec:
> 801108478, st_spare1: 0, st_spare2: 0, st_spare3: 0, st_spare4: 0,
> st_spare5: 0, st_spare6: 0, >
> libguestfs: trace: v2v: statns "/boot/vmlinuz-3.17.4-301.fc21.x86_64"
> guestfsd: main_loop: new request, len 0x50
> guestfsd: main_loop: proc 421 (statns) took 0.00 seconds
> libguestfs: trace: v2v: statns = <struct guestfs_statns = st_dev: 2049,
> st_ino: 20, st_mode: 33261, st_nlink: 1, st_uid: 0, st_gid: 0, st_rdev: 0,
> st_size: 5751144, st_blksize: 4096, st_blocks: 11240, st_atime_sec:
> 1421862777, st_atime_nsec: 619122938, st_mtime_sec: 1417115668,
> st_mtime_nsec: 0, st_ctime_sec: 1421861378, st_ctime_nsec: 221208355,
> st_spare1: 0, st_spare2: 0, st_spare3: 0, st_spare4: 0, st_spare5: 0,
> st_spare6: 0, >
> libguestfs: trace: v2v: statns "/boot/vmlinuz-3.17.8-300.fc21.x86_64"
> guestfsd: main_loop: new request, len 0x50
> guestfsd: main_loop: proc 421 (statns) took 0.00 seconds
> libguestfs: trace: v2v: statns = <struct guestfs_statns = st_dev: 2049,
> st_ino: 340, st_mode: 33261, st_nlink: 1, st_uid: 0, st_gid: 0, st_rdev:
> 0, st_size: 5757864, st_blksize: 4096, st_blocks: 11248, st_atime_sec:
> 1420760440, st_atime_nsec: 0, st_mtime_sec: 1420760440, st_mtime_nsec: 0,
> st_ctime_sec: 1421863850, st_ctime_nsec: 600025468, st_spare1: 0,
> st_spare2: 0, st_spare3: 0, st_spare4: 0, st_spare5: 0, st_spare6: 0, >
> grub kernels in this guest (first in list is default):
> (kernel-core, 3.17.8-300.fc21, x86_64,
> /boot/vmlinuz-3.17.8-300.fc21.x86_64,
> /boot/initramfs-3.17.8-300.fc21.x86_64.img, virtio=true, xen=false,
> debug=false)
> (kernel-core, 3.17.4-301.fc21, x86_64,
> /boot/vmlinuz-3.17.4-301.fc21.x86_64,
> /boot/initramfs-3.17.4-301.fc21.x86_64.img, virtio=true, xen=false,
> debug=false)
> (kernel-core, 3.17.8-300.fc21, x86_64,
> /boot/vmlinuz-3.17.8-300.fc21.x86_64,
> /boot/initramfs-3.17.8-300.fc21.x86_64.img, virtio=true, xen=false,
> debug=false)
> libguestfs: trace: v2v: is_file "/var/lib/VBoxGuestAdditions/config"
> "followsymlinks:true"
> guestfsd: main_loop: new request, len 0x54
> guestfsd: main_loop: proc 37 (is_file) took 0.00 seconds
> libguestfs: trace: v2v: is_file = 0
> libguestfs: trace: v2v: is_file "/etc/init.d/kudzu" "followsymlinks:true"
> guestfsd: main_loop: new request, len 0x44
> guestfsd: main_loop: proc 37 (is_file) took 0.00 seconds
> libguestfs: trace: v2v: is_file = 0
> libguestfs: trace: v2v: is_file "/etc/sysconfig/kernel" "followsymlinks:true"
> guestfsd: main_loop: new request, len 0x48
> guestfsd: main_loop: proc 37 (is_file) took 0.00 seconds
> libguestfs: trace: v2v: is_file = 1
> libguestfs: trace: v2v: aug_match
> "/files/etc/sysconfig/kernel/DEFAULTKERNEL/value"
> guestfsd: main_loop: new request, len 0x5c
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match =
> ["/files/etc/sysconfig/kernel/DEFAULTKERNEL/value"]
> libguestfs: trace: v2v: aug_set
> "/files/etc/sysconfig/kernel/DEFAULTKERNEL/value" "kernel-core"
> guestfsd: main_loop: new request, len 0x6c
> guestfsd: main_loop: proc 20 (aug_set) took 0.00 seconds
> libguestfs: trace: v2v: aug_set = 0
> libguestfs: trace: v2v: aug_save
> guestfsd: main_loop: new request, len 0x28
> guestfsd: main_loop: proc 25 (aug_save) took 0.00 seconds
> libguestfs: trace: v2v: aug_save = 0
> libguestfs: trace: v2v: aug_match "/files/etc/inittab/*/process"
> guestfsd: main_loop: new request, len 0x48
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_match "/files/etc/securetty/*"
> guestfsd: main_loop: new request, len 0x44
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_save
> guestfsd: main_loop: new request, len 0x28
> guestfsd: main_loop: proc 25 (aug_save) took 0.00 seconds
> libguestfs: trace: v2v: aug_save = 0
> libguestfs: trace: v2v: aug_match
> "/files/etc/sysconfig/grub/GRUB_CMDLINE_LINUX"
> guestfsd: main_loop: new request, len 0x58
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_match
> "/files/etc/default/grub/GRUB_CMDLINE_LINUX"
> guestfsd: main_loop: new request, len 0x58
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match =
> ["/files/etc/default/grub/GRUB_CMDLINE_LINUX"]
> libguestfs: trace: v2v: aug_match
> "/files/etc/default/grub/GRUB_CMDLINE_LINUX_DEFAULT"
> guestfsd: main_loop: new request, len 0x60
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_get "/files/etc/default/grub/GRUB_CMDLINE_LINUX"
> guestfsd: main_loop: new request, len 0x58
> guestfsd: main_loop: proc 19 (aug_get) took 0.00 seconds
> libguestfs: trace: v2v: aug_get = ""rhgb quiet""
> libguestfs: trace: v2v: is_file "/etc/X11/xorg.conf" "followsymlinks:true"
> guestfsd: main_loop: new request, len 0x44
> guestfsd: main_loop: proc 37 (is_file) took 0.00 seconds
> libguestfs: trace: v2v: is_file = 0
> libguestfs: trace: v2v: is_file "/etc/X11/XF86Config" "followsymlinks:true"
> guestfsd: main_loop: new request, len 0x44
> guestfsd: main_loop: proc 37 (is_file) took 0.00 seconds
> libguestfs: trace: v2v: is_file = 0
> libguestfs: trace: v2v: aug_match "/files/etc/X11/xorg.conf/Device/Driver"
> guestfsd: main_loop: new request, len 0x54
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_match
> "/files/etc/X11/xorg.conf/Device/VendorName"
> guestfsd: main_loop: new request, len 0x58
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_match "/files/etc/X11/xorg.conf/Device/BoardName"
> guestfsd: main_loop: new request, len 0x58
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_save
> guestfsd: main_loop: new request, len 0x28
> guestfsd: main_loop: proc 25 (aug_save) took 0.00 seconds
> libguestfs: trace: v2v: aug_save = 0
> block device map:
> sda -> vda
> xvda -> vda
> libguestfs: trace: v2v: aug_match "/files/etc/fstab/*/spec"
> guestfsd: main_loop: new request, len 0x44
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = ["/files/etc/fstab/1/spec",
> "/files/etc/fstab/2/spec", "/files/etc/fstab/3/spec"]
> libguestfs: trace: v2v: aug_match "/files/boot/grub2/grub.cfg/*/kernel/root"
> guestfsd: main_loop: new request, len 0x54
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_match
> "/files/boot/grub2/grub.cfg/*/kernel/resume"
> guestfsd: main_loop: new request, len 0x58
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_match "/files/boot/grub/device.map/*[label()
> != "#comment"]"
> guestfsd: main_loop: new request, len 0x60
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_match "/files/etc/sysconfig/grub/boot"
> guestfsd: main_loop: new request, len 0x4c
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_match
> "/files/etc/sysconfig/grub/GRUB_CMDLINE_LINUX"
> guestfsd: main_loop: new request, len 0x58
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_match
> "/files/etc/default/grub/GRUB_CMDLINE_LINUX"
> guestfsd: main_loop: new request, len 0x58
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match =
> ["/files/etc/default/grub/GRUB_CMDLINE_LINUX"]
> libguestfs: trace: v2v: aug_match
> "/files/etc/default/grub/GRUB_CMDLINE_LINUX_DEFAULT"
> guestfsd: main_loop: new request, len 0x60
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_match "/files/boot/grub2/device.map/*[label()
> != "#comment"]"
> guestfsd: main_loop: new request, len 0x64
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = ["/files/boot/grub2/device.map/hd0",
> "/files/boot/grub2/device.map/hd1"]
> libguestfs: trace: v2v: aug_get "/files/etc/fstab/1/spec"
> guestfsd: main_loop: new request, len 0x44
> guestfsd: main_loop: proc 19 (aug_get) took 0.00 seconds
> libguestfs: trace: v2v: aug_get = "UUID=88eeab88-7e17-4df7-b36e-876b6fc9c14f"
> libguestfs: trace: v2v: aug_get "/files/etc/fstab/2/spec"
> guestfsd: main_loop: new request, len 0x44
> guestfsd: main_loop: proc 19 (aug_get) took 0.00 seconds
> libguestfs: trace: v2v: aug_get = "UUID=089a81b0-a74b-42dd-b145-ac54fa6e49a4"
> libguestfs: trace: v2v: aug_get "/files/etc/fstab/3/spec"
> guestfsd: main_loop: new request, len 0x44
> guestfsd: main_loop: proc 19 (aug_get) took 0.00 seconds
> libguestfs: trace: v2v: aug_get = "UUID=bb65f0f7-7992-4a42-9b47-b952fa815207"
> libguestfs: trace: v2v: aug_get "/files/etc/default/grub/GRUB_CMDLINE_LINUX"
> guestfsd: main_loop: new request, len 0x58
> guestfsd: main_loop: proc 19 (aug_get) took 0.00 seconds
> libguestfs: trace: v2v: aug_get = ""rhgb quiet""
> libguestfs: trace: v2v: aug_get "/files/boot/grub2/device.map/hd0"
> guestfsd: main_loop: new request, len 0x4c
> guestfsd: main_loop: proc 19 (aug_get) took 0.00 seconds
> libguestfs: trace: v2v: aug_get = "/dev/sda"
> libguestfs: trace: v2v: aug_set "/files/boot/grub2/device.map/hd0" "/dev/vda"
> guestfsd: main_loop: new request, len 0x58
> guestfsd: main_loop: proc 20 (aug_set) took 0.00 seconds
> libguestfs: trace: v2v: aug_set = 0
> libguestfs: trace: v2v: aug_get "/files/boot/grub2/device.map/hd1"
> guestfsd: main_loop: new request, len 0x4c
> guestfsd: main_loop: proc 19 (aug_get) took 0.00 seconds
> libguestfs: trace: v2v: aug_get = "/dev/sda"
> libguestfs: trace: v2v: aug_set "/files/boot/grub2/device.map/hd1" "/dev/vda"
> guestfsd: main_loop: new request, len 0x58
> guestfsd: main_loop: proc 20 (aug_set) took 0.00 seconds
> libguestfs: trace: v2v: aug_set = 0
> libguestfs: trace: v2v: aug_save
> guestfsd: main_loop: new request, len 0x28
> libguestfs: trace: v2v: aug_save = 0
> libguestfs: trace: v2v: command "grub2-mkconfig -o /boot/grub2/grub.cfg"
> guestfsd: main_loop: proc 25 (aug_save) took 0.00 seconds
> guestfsd: main_loop: new request, len 0x60
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: mount --bind /dev /sysroot/dev
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: mount --bind /dev/pts /sysroot/dev/pts
> mount: mount point /sysroot/dev/pts does not exist
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: mount --bind /proc /sysroot/proc
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: mount --bind /sys/fs/selinux /sysroot/selinux
> mount: mount point /sysroot/selinux does not exist
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: mount --bind /sys /sysroot/sys
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: mount --bind /sys/fs/selinux /sysroot/sys/fs/selinux
> mount: mount point /sysroot/sys/fs/selinux does not exist
> renaming /sysroot/etc/resolv.conf to /sysroot/etc/6c3fqtab
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: cp /etc/resolv.conf /sysroot/etc/resolv.conf
> commandrvf: stdout=y stderr=y flags=0x40000
> commandrvf: grub2-mkconfig -o /boot/grub2/grub.cfg
> Generating grub configuration file ...
> Found linux image: /boot/vmlinuz-3.17.8-300.fc21.x86_64
> Found initrd image: /boot/initramfs-3.17.8-300.fc21.x86_64.img
> Found linux image: /boot/vmlinuz-3.17.4-301.fc21.x86_64
> Found initrd image: /boot/initramfs-3.17.4-301.fc21.x86_64.img
> Found linux image: /boot/vmlinuz-0-rescue-aebaf0a54c334c40a3f2a001266b032e
> Found initrd image:
> /boot/initramfs-0-rescue-aebaf0a54c334c40a3f2a001266b032e.img
> ERROR: mkdir /var/lock/dmraid
> ERROR: mkdir /var/lock/dmraid
> ERROR: mkdir /var/lock/dmraid
> done
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: umount /sysroot/sys
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: umount /sysroot/proc
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: umount /sysroot/dev
> renaming /sysroot/etc/6c3fqtab to /sysroot/etc/resolv.conf
> guestfsd: main_loop: proc 50 (command) took 0.57 seconds
> libguestfs: trace: v2v: command = ""
> libguestfs: trace: v2v: aug_load
> guestfsd: main_loop: new request, len 0x28
> guestfsd: main_loop: proc 27 (aug_load) took 0.01 seconds
> libguestfs: trace: v2v: aug_load = 0
> libguestfs: trace: v2v: aug_match "/augeas/files//error"
> guestfsd: main_loop: new request, len 0x40
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: rm_f "/etc/blkid/blkid.tab"
> guestfsd: main_loop: new request, len 0x40
> guestfsd: main_loop: proc 367 (rm_f) took 0.00 seconds
> libguestfs: trace: v2v: rm_f = 0
> libguestfs: trace: v2v: rm_f "/etc/blkid.tab"
> guestfsd: main_loop: new request, len 0x3c
> guestfsd: main_loop: proc 367 (rm_f) took 0.00 seconds
> libguestfs: trace: v2v: rm_f = 0
> libguestfs: trace: v2v: rm_f "/etc/lvm/cache/.cache"
> guestfsd: main_loop: new request, len 0x44
> guestfsd: main_loop: proc 367 (rm_f) took 0.00 seconds
> libguestfs: trace: v2v: rm_f = 0
> libguestfs: trace: v2v: aug_match "/files/etc/conf.modules/alias[. =~
> regexp('eth[0-9]+')]"
> guestfsd: main_loop: new request, len 0x64
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_match "/files/etc/modules.conf/alias[. =~
> regexp('eth[0-9]+')]"
> guestfsd: main_loop: new request, len 0x64
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_match "/files/etc/modprobe.conf/alias[. =~
> regexp('eth[0-9]+')]"
> guestfsd: main_loop: new request, len 0x64
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_match "/files/etc/modprobe.d/*/alias[. =~
> regexp('eth[0-9]+')]"
> guestfsd: main_loop: new request, len 0x64
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_match "/files/etc/conf.modules/alias[. =~
> regexp('scsi_hostadapter.*')]"
> guestfsd: main_loop: new request, len 0x6c
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_match "/files/etc/modules.conf/alias[. =~
> regexp('scsi_hostadapter.*')]"
> guestfsd: main_loop: new request, len 0x6c
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_match "/files/etc/modprobe.conf/alias[. =~
> regexp('scsi_hostadapter.*')]"
> guestfsd: main_loop: new request, len 0x70
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_match "/files/etc/modprobe.d/*/alias[. =~
> regexp('scsi_hostadapter.*')]"
> guestfsd: main_loop: new request, len 0x6c
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: is_dir "/etc/modprobe.d" "followsymlinks:true"
> guestfsd: main_loop: new request, len 0x40
> guestfsd: main_loop: proc 38 (is_dir) took 0.00 seconds
> libguestfs: trace: v2v: is_dir = 1
> libguestfs: trace: v2v: aug_set
> "/files/etc/modprobe.d/virt-v2v-added.conf/alias[last()+1]"
> "scsi_hostadapter"
> guestfsd: main_loop: new request, len 0x7c
> guestfsd: main_loop: proc 20 (aug_set) took 0.00 seconds
> libguestfs: trace: v2v: aug_set = 0
> libguestfs: trace: v2v: aug_set
> "/files/etc/modprobe.d/virt-v2v-added.conf/alias[last()]/modulename"
> "virtio_blk"
> guestfsd: main_loop: new request, len 0x80
> guestfsd: main_loop: proc 20 (aug_set) took 0.00 seconds
> libguestfs: trace: v2v: aug_set = 0
> libguestfs: trace: v2v: aug_match
> "/files/etc/conf.modules/alias[modulename =~
> regexp('xennet|xen-vnif|xenblk|xen-vbd')]"
> guestfsd: main_loop: new request, len 0x84
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_match
> "/files/etc/modules.conf/alias[modulename =~
> regexp('xennet|xen-vnif|xenblk|xen-vbd')]"
> guestfsd: main_loop: new request, len 0x84
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_match
> "/files/etc/modprobe.conf/alias[modulename =~
> regexp('xennet|xen-vnif|xenblk|xen-vbd')]"
> guestfsd: main_loop: new request, len 0x84
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_match
> "/files/etc/modprobe.d/*/alias[modulename =~
> regexp('xennet|xen-vnif|xenblk|xen-vbd')]"
> guestfsd: main_loop: new request, len 0x84
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_save
> guestfsd: main_loop: new request, len 0x28
> libguestfs: trace: v2v: aug_save = 0
> libguestfs: trace: v2v: mv "/boot/initramfs-3.17.8-300.fc21.x86_64.img"
> "/boot/initramfs-3.17.8-300.fc21.x86_64.img.pre-v2v"
> guestfsd: main_loop: proc 25 (aug_save) took 0.00 seconds
> guestfsd: main_loop: new request, len 0x90
> commandrvf: stdout=n stderr=y flags=0x0
> commandrvf: mv /sysroot/boot/initramfs-3.17.8-300.fc21.x86_64.img
> /sysroot/boot/initramfs-3.17.8-300.fc21.x86_64.img.pre-v2v
> libguestfs: trace: v2v: mv = 0
> libguestfs: trace: v2v: is_file "/sbin/dracut" "followsymlinks:true"
> guestfsd: main_loop: proc 89 (mv) took 0.00 seconds
> guestfsd: main_loop: new request, len 0x3c
> libguestfs: trace: v2v: is_file = 1
> libguestfs: trace: v2v: command "/sbin/dracut --verbose --add-drivers
> virtio virtio_ring virtio_blk virtio_net virtio_pci
> /boot/initramfs-3.17.8-300.fc21.x86_64.img 3.17.8-300.fc21.x86_64"
> guestfsd: main_loop: proc 37 (is_file) took 0.00 seconds
> guestfsd: main_loop: new request, len 0xe4
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: mount --bind /dev /sysroot/dev
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: mount --bind /dev/pts /sysroot/dev/pts
> mount: mount point /sysroot/dev/pts does not exist
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: mount --bind /proc /sysroot/proc
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: mount --bind /sys/fs/selinux /sysroot/selinux
> mount: mount point /sysroot/selinux does not exist
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: mount --bind /sys /sysroot/sys
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: mount --bind /sys/fs/selinux /sysroot/sys/fs/selinux
> mount: mount point /sysroot/sys/fs/selinux does not exist
> renaming /sysroot/etc/resolv.conf to /sysroot/etc/fvo9h3q7
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: cp /etc/resolv.conf /sysroot/etc/resolv.conf
> commandrvf: stdout=y stderr=y flags=0x40000
> commandrvf: /sbin/dracut --verbose --add-drivers "virtio virtio_ring
> virtio_blk virtio_net virtio_pci"
> /boot/initramfs-3.17.8-300.fc21.x86_64.img 3.17.8-300.fc21.x86_64
> No '/dev/log' or 'logger' included for syslog logging
> [ 13.635451] dracut[966] No '/dev/log' or 'logger' included for syslog
> logging
> Executing: /sbin/dracut --verbose --add-drivers "virtio virtio_ring
> virtio_blk virtio_net virtio_pci"
> /boot/initramfs-3.17.8-300.fc21.x86_64.img 3.17.8-300.fc21.x86_64
> [ 13.665763] dracut[966] Executing: /sbin/dracut --verbose --add-drivers
> "virtio virtio_ring virtio_blk virtio_net virtio_pci"
> /boot/initramfs-3.17.8-300.fc21.x86_64.img 3.17.8-300.fc21.x86_64
> dracut module 'busybox' will not be installed, because command 'busybox'
> could not be found!
> [ 13.783635] dracut[966] dracut module 'busybox' will not be installed,
> because command 'busybox' could not be found!
> dracut module 'fcoe' will not be installed, because command 'dcbtool'
> could not be found!
> [ 13.876843] dracut[966] dracut module 'fcoe' will not be installed,
> because command 'dcbtool' could not be found!
> dracut module 'fcoe' will not be installed, because command 'fipvlan'
> could not be found!
> [ 13.879013] dracut[966] dracut module 'fcoe' will not be installed,
> because command 'fipvlan' could not be found!
> dracut module 'fcoe' will not be installed, because command 'lldpad' could
> not be found!
> [ 13.881179] dracut[966] dracut module 'fcoe' will not be installed,
> because command 'lldpad' could not be found!
> dracut module 'fcoe-uefi' will not be installed, because command 'dcbtool'
> could not be found!
> [ 13.885860] dracut[966] dracut module 'fcoe-uefi' will not be
> installed, because command 'dcbtool' could not be found!
> dracut module 'fcoe-uefi' will not be installed, because command 'fipvlan'
> could not be found!
> [ 13.888081] dracut[966] dracut module 'fcoe-uefi' will not be
> installed, because command 'fipvlan' could not be found!
> dracut module 'fcoe-uefi' will not be installed, because command 'lldpad'
> could not be found!
> [ 13.890369] dracut[966] dracut module 'fcoe-uefi' will not be
> installed, because command 'lldpad' could not be found!
> dracut module 'iscsi' will not be installed, because command 'iscsistart'
> could not be found!
> [ 13.896999] dracut[966] dracut module 'iscsi' will not be installed,
> because command 'iscsistart' could not be found!
> dracut module 'iscsi' will not be installed, because command 'iscsi-iname'
> could not be found!
> [ 13.899112] dracut[966] dracut module 'iscsi' will not be installed,
> because command 'iscsi-iname' could not be found!
> dracut module 'nbd' will not be installed, because command 'nbd-client'
> could not be found!
> [ 13.903211] dracut[966] dracut module 'nbd' will not be installed,
> because command 'nbd-client' could not be found!
> dracut module 'biosdevname' will not be installed, because command
> 'biosdevname' could not be found!
> [ 13.938682] dracut[966] dracut module 'biosdevname' will not be
> installed, because command 'biosdevname' could not be found!
> dracut module 'busybox' will not be installed, because command 'busybox'
> could not be found!
> [ 14.007359] dracut[966] dracut module 'busybox' will not be installed,
> because command 'busybox' could not be found!
> dracut module 'fcoe' will not be installed, because command 'dcbtool'
> could not be found!
> [ 14.055331] dracut[966] dracut module 'fcoe' will not be installed,
> because command 'dcbtool' could not be found!
> dracut module 'fcoe' will not be installed, because command 'fipvlan'
> could not be found!
> [ 14.057940] dracut[966] dracut module 'fcoe' will not be installed,
> because command 'fipvlan' could not be found!
> dracut module 'fcoe' will not be installed, because command 'lldpad' could
> not be found!
> [ 14.059984] dracut[966] dracut module 'fcoe' will not be installed,
> because command 'lldpad' could not be found!
> dracut module 'fcoe-uefi' will not be installed, because command 'dcbtool'
> could not be found!
> [ 14.063472] dracut[966] dracut module 'fcoe-uefi' will not be
> installed, because command 'dcbtool' could not be found!
> dracut module 'fcoe-uefi' will not be installed, because command 'fipvlan'
> could not be found!
> [ 14.065623] dracut[966] dracut module 'fcoe-uefi' will not be
> installed, because command 'fipvlan' could not be found!
> dracut module 'fcoe-uefi' will not be installed, because command 'lldpad'
> could not be found!
> [ 14.067865] dracut[966] dracut module 'fcoe-uefi' will not be
> installed, because command 'lldpad' could not be found!
> dracut module 'iscsi' will not be installed, because command 'iscsistart'
> could not be found!
> [ 14.072897] dracut[966] dracut module 'iscsi' will not be installed,
> because command 'iscsistart' could not be found!
> dracut module 'iscsi' will not be installed, because command 'iscsi-iname'
> could not be found!
> [ 14.075040] dracut[966] dracut module 'iscsi' will not be installed,
> because command 'iscsi-iname' could not be found!
> dracut module 'nbd' will not be installed, because command 'nbd-client'
> could not be found!
> [ 14.078622] dracut[966] dracut module 'nbd' will not be installed,
> because command 'nbd-client' could not be found!
> *** Including module: bash ***
> [ 14.142802] dracut[966] *** Including module: bash ***
> *** Including module: i18n ***
> [ 14.148588] dracut[966] *** Including module: i18n ***
> *** Including module: network ***
> [ 14.336325] dracut[966] *** Including module: network ***
> *** Including module: ifcfg ***
> [ 16.015612] dracut[966] *** Including module: ifcfg ***
> *** Including module: drm ***
> [ 16.021035] dracut[966] *** Including module: drm ***
> *** Including module: plymouth ***
> [ 17.051328] dracut[966] *** Including module: plymouth ***
> *** Including module: kernel-modules ***
> [ 17.274162] dracut[966] *** Including module: kernel-modules ***
> *** Including module: rootfs-block ***
> [ 24.046556] dracut[966] *** Including module: rootfs-block ***
> *** Including module: terminfo ***
> [ 24.055831] dracut[966] *** Including module: terminfo ***
> *** Including module: udev-rules ***
> [ 24.069906] dracut[966] *** Including module: udev-rules ***
> Skipping udev rule: 91-permissions.rules
> [ 24.238349] dracut[966] Skipping udev rule: 91-permissions.rules
> Skipping udev rule: 80-drivers-modprobe.rules
> [ 24.240008] dracut[966] Skipping udev rule: 80-drivers-modprobe.rules
> *** Including module: systemd ***
> [ 24.258293] dracut[966] *** Including module: systemd ***
> *** Including module: usrmount ***
> [ 24.446001] dracut[966] *** Including module: usrmount ***
> *** Including module: base ***
> [ 24.449400] dracut[966] *** Including module: base ***
> *** Including module: fs-lib ***
> [ 24.506200] dracut[966] *** Including module: fs-lib ***
> *** Including module: shutdown ***
> [ 24.519959] dracut[966] *** Including module: shutdown ***
> *** Including modules done ***
> [ 24.554250] dracut[966] *** Including modules done ***
> *** Installing kernel module dependencies and firmware ***
> [ 24.583486] dracut[966] *** Installing kernel module dependencies and
> firmware ***
> *** Installing kernel module dependencies and firmware done ***
> [ 24.900621] dracut[966] *** Installing kernel module dependencies and
> firmware done ***
> *** Resolving executable dependencies ***
> [ 24.917031] dracut[966] *** Resolving executable dependencies ***
> *** Resolving executable dependencies done***
> [ 25.482622] dracut[966] *** Resolving executable dependencies done***
> *** Hardlinking files ***
> [ 25.495828] dracut[966] *** Hardlinking files ***
> *** Hardlinking files done ***
> [ 25.505896] dracut[966] *** Hardlinking files done ***
> *** Stripping files ***
> [ 25.507966] dracut[966] *** Stripping files ***
> *** Stripping files done ***
> [ 25.607024] dracut[966] *** Stripping files done ***
> *** Generating early-microcode cpio image ***
> [ 25.609139] dracut[966] *** Generating early-microcode cpio image ***
> *** Constructing GenuineIntel.bin ****
> [ 25.616820] dracut[966] *** Constructing GenuineIntel.bin ****
> *** Store current command line parameters ***
> [ 25.630768] dracut[966] *** Store current command line parameters ***
> *** Creating image file ***
> [ 25.633892] dracut[966] *** Creating image file ***
> *** Creating image file done ***
> [ 33.376016] dracut[966] *** Creating image file done ***
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: umount /sysroot/sys
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: umount /sysroot/proc
> commandrvf: stdout=n stderr=n flags=0x0
> commandrvf: umount /sysroot/dev
> renaming /sysroot/etc/fvo9h3q7 to /sysroot/etc/resolv.conf
> guestfsd: main_loop: proc 50 (command) took 22.81 seconds
> libguestfs: trace: v2v: command = ""
> libguestfs: trace: v2v: is_file "/usr/sbin/load_policy" "followsymlinks:true"
> guestfsd: main_loop: new request, len 0x48
> guestfsd: main_loop: proc 37 (is_file) took 0.00 seconds
> libguestfs: trace: v2v: is_file = 1
> libguestfs: trace: v2v: is_file "/etc/selinux/config" "followsymlinks:true"
> guestfsd: main_loop: new request, len 0x44
> guestfsd: main_loop: proc 37 (is_file) took 0.00 seconds
> libguestfs: trace: v2v: is_file = 1
> libguestfs: trace: v2v: feature_available "selinuxrelabel"
> libguestfs: trace: v2v: internal_feature_available "selinuxrelabel"
> guestfsd: main_loop: new request, len 0x3c
> guestfsd: main_loop: proc 458 (internal_feature_available) took 0.00 seconds
> libguestfs: trace: v2v: internal_feature_available = 0
> libguestfs: trace: v2v: feature_available = 1
> libguestfs: trace: v2v: aug_init "/" 48
> guestfsd: main_loop: new request, len 0x34
> guestfsd: main_loop: proc 16 (aug_init) took 0.33 seconds
> libguestfs: trace: v2v: aug_init = 0
> libguestfs: trace: v2v: aug_rm "/augeas/load/*["/etc/selinux/config/" !~
> regexp('^') + glob(incl) + regexp('/.*')]"
> guestfsd: main_loop: new request, len 0x80
> guestfsd: main_loop: proc 22 (aug_rm) took 0.01 seconds
> libguestfs: trace: v2v: aug_rm = 1329
> libguestfs: trace: v2v: aug_load
> guestfsd: main_loop: new request, len 0x28
> guestfsd: main_loop: proc 27 (aug_load) took 0.01 seconds
> libguestfs: trace: v2v: aug_load = 0
> libguestfs: trace: v2v: aug_match "/augeas/files//error"
> guestfsd: main_loop: new request, len 0x40
> guestfsd: main_loop: proc 24 (aug_match) took 0.00 seconds
> libguestfs: trace: v2v: aug_match = []
> libguestfs: trace: v2v: aug_get "/files/etc/selinux/config/SELINUXTYPE"
> guestfsd: main_loop: new request, len 0x54
> guestfsd: main_loop: proc 19 (aug_get) took 0.00 seconds
> libguestfs: trace: v2v: aug_get = "targeted"
> libguestfs: trace: v2v: aug_close
> guestfsd: main_loop: new request, len 0x28
> guestfsd: main_loop: proc 26 (aug_close) took 0.03 seconds
> libguestfs: trace: v2v: aug_close = 0
> libguestfs: trace: v2v: selinux_relabel
> "/etc/selinux/targeted/contexts/files/file_contexts" "/" "force:true"
> guestfsd: main_loop: new request, len 0x6c
> commandrvf: stdout=n stderr=y flags=0x0
> commandrvf: setfiles -F -e /sysroot/dev -e /sysroot/proc -e
> /sysroot/selinux -e /sysroot/sys -r /sysroot -q
> /sysroot/etc/selinux/targeted/contexts/files/file_contexts /sysroot/
> Can't stat exclude path "/sysroot/selinux", No such file or directory -
> ignoring.
> [HANG HERE]
>
> --
> Derek Atkins 617-623-3745
> derek at ihtfp.com <mailto:derek at ihtfp.com> www.ihtfp.com <http://www.ihtfp.com/>
> Computer and Internet Security Consultant
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org <mailto:Users at ovirt.org>
> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20161116/87aff640/attachment-0001.html>
More information about the Users
mailing list