[ovirt-users] Self hosted single server network requirements
Mark Steckel
mjs at fix.net
Mon Nov 21 21:21:46 UTC 2016
----- Derek Atkins <derek at ihtfp.com> wrote:
> Hi,
>
> Mark Steckel <mjs at fix.net> writes:
>
> > Thanks all who have responded so far.
> >
> > Advice so far seems to be:
> > * Use 'screen' when deploying. Easy
> > * Don't use/disable Network-Manager. Easy
> > * Preconfigure the ovirtmgmt bridge. I've got questions...
> >
> > The server has a public /32 as the primary IP, and a public /29 which
> > will be used for the VMs.
> >
> > Besides creating the ovirtmgmt bridge is there anything specific for
> > how I should configure it?
>
> My recommendation is that you just set up non-NM-controlled static
> network using your public /32. Then the hosted-engine --deploy process
> should take that config and apply it to ovirtmgmt bridge. At least,
> that's what happened for me when I did it. I don't think you need to
> set up the ovirtmgmt bridge manually.
This is what I initially did and then lost Internet access when the /32 was migrated to the ovirtmgmt bridge.
I then used KVM console access to access the box, but it could no longer access it's public gateway. It was at this point then I surmised that something was amiss.
>
> As for the /29 -- don't worry about it now, that would be a routing
> issue you can apply later. Is it the same network as the /32? Or is it
> a different network?
Different.
>
> > Thanks
> > Mark
>
> -derek
>
> > ----- Paul-Erik Törrönen <poltsi at poltsi.fi> wrote:
> >> On 2016-11-19 11:28, Joop wrote:
> >> > I have never setup such a server but if you create the ovirtmgmt bridge
> >> > first then the deploy will leave it alone and you won't lose network
> >> > connectivity.
> >>
> >> I've set up almost the described combination (I do run the vm-engine on
> >> a separate laptop), and found that running the commandline stuff in a
> >> screen helps a lot, the setup commands can then complete instead of
> >> being interrupted as your (ssh-)session is killed.
> >>
> >> I also enountered the same issue of network connection loss as the
> >> ovirtmgmt-interface took over my primary connection, but I was able to
> >> continue as I had several network devices on my hardware which I had
> >> already configured, and was able to access the server through them.
> >>
> >> If you only have one network interface, then I would recommend running
> >> the commands in a screen, and in the case of losing the connection,
> >> reconnect to the screen through the KVM.
> >>
> >> My 0.02€
> >>
> >> Poltsi
> >> _______________________________________________
> >> Users mailing list
> >> Users at ovirt.org
> >> http://lists.ovirt.org/mailman/listinfo/users
> >
> > _______________________________________________
> > Users mailing list
> > Users at ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
>
> --
> Derek Atkins 617-623-3745
> derek at ihtfp.com www.ihtfp.com
> Computer and Internet Security Consultant
More information about the Users
mailing list