[ovirt-users] hosted-engine and GlusterFS on Vlan help

[Hanson]

Hi Guys,

I've converted my lab from using 802.3ad with bonding>bridged vlans to 
one link with two vlan bridges and am now having traffic jumping to the 
gateway when moving VM's/ISO/etc.

802.3ad = node1>switch1>node2
801.1q = node1>switch1>gateway>switch1>node2

I assume I've setup the same vlan style, though this time I used the gui 
on the initial host install... setting up the vlans with their parent 
being eth0.

Hosted-engine on deploy then creates ovirtmgmt on top of eth0.11 ...

Switch is tagged for vlans 10 & 11. Including a PVID of 11 for good 
measure. (Gluster is vlan 11)

I'd expect the traffic from node to node to be going from port to port 
like it did in 802.3ad, what have I done wrong or is it using the gui 
initially?

This is how the current setup looks:

/var/lib/vdsm/Persistent/netconf/nets/ovirtmgmt:
{
     "ipv6autoconf": false,
     "nameservers": [],
     "nic": "eth0",
     "vlan": 11,
     "ipaddr": "10.0.3.11",
     "switch": "legacy",
     "mtu": 1500,
     "netmask": "255.255.255.0",
     "dhcpv6": false,
     "stp": false,
     "bridged": true,
     "gateway": "10.0.3.1",
     "defaultRoute": true
}

/etc/sysconfig/network-scripts/ifcfg-ovirtmgmt:
# Generated by VDSM version 4.18.13-1.el7.centos
DEVICE=ovirtmgmt
TYPE=Bridge
DELAY=0
STP=off
ONBOOT=yes
IPADDR=10.0.3.11
NETMASK=255.255.255.0
GATEWAY=10.0.3.1
BOOTPROTO=none
DEFROUTE=yes
NM_CONTROLLED=no
IPV6INIT=no
VLAN_ID=11
MTU=1500

Thanks!!