[ovirt-users] engine upgrade 4.1.0 => 4.1.1, no more engine console available

Rafał Wojciechowski it at rafalwojciechowski.pl
Tue Apr 18 14:52:35 UTC 2017


hi,

I applied it for 
/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/ovf/ 
content, then rebooted, reinstalled host in ovirt engine web 
administrator, again rebooted and tried again but I have still the same 
issue with libvirtd segfault


Regards,
Rafal Wojciechowski


W dniu 18.04.2017 o 14:20, Evgenia Tokar pisze:
> Hi,
>
> Thanks for bringing the issue to our attention and for answering the 
> questions.
>
> There is a patch to fix this: https://gerrit.ovirt.org/#/c/75515/
> After applying the patch a restart to the hosted engine vm is required 
> (not just the engine).
>
> Let me know if you are still experiencing issues with this.
>
> Thanks,
> Jenny
>
>
> On Wed, Apr 12, 2017 at 8:05 PM, Rafał Wojciechowski 
> <it at rafalwojciechowski.pl <mailto:it at rafalwojciechowski.pl>> wrote:
>
>     hi,
>
>     I will answer also. however I am using single hypervisor so
>     without ha and I have no performed steps:
>     https://www.ovirt.org/documentation/how-to/hosted-engine/
>     <https://www.ovirt.org/documentation/how-to/hosted-engine/>
>
>     1. yes - however I have to start in headless mode so it is quite
>     obvius
>     if I am trying to start with spice/vnc console I am getting
>     segfault from libvirtd
>     2. as above
>     3. as above
>
>
>     W dniu 12.04.2017 o 14:12, Arsène Gschwind pisze:
>>
>>     Hi all,
>>
>>     I will answer your questions:
>>
>>     1. definitively yes
>>     2. the command hosted-engine --console works well and I'm able to
>>     connect.
>>     3. Here are the device entries
>>
>>     devices={device:qxl,alias:video0,type:video,deviceId:5210a3c3-9cc4-4aed-90c6-432dd2d37c46,address:{slot:0x02,
>>     bus:0x00,domain:0x0000,type:pci,function:0x0}}
>>     devices={device:console,type:console}
>>
>>     Thanks and rgds,
>>     Arsène
>>
>>     On 04/12/2017 10:53 AM, Evgenia Tokar wrote:
>>>     Hi all,
>>>
>>>     I have managed to reproduce this issue and opened a bug for
>>>     tracking it: https://bugzilla.redhat.com/show_bug.cgi?id=1441570
>>>     <https://bugzilla.redhat.com/show_bug.cgi?id=1441570> .
>>>
>>>     There is no solution yet, but I would appreciate if any who
>>>     encountered this issue will answer some questions:
>>>     1. Is the console button greyed out in the UI?
>>>     2. On the hosted engine host, does the command hosted-engine
>>>     --console fails?
>>>          If it fails, try upgrading ovirt-hosted-engine-ha on the
>>>     hosted engine host. We had a bug related to this issue that was
>>>     fixed (https://bugzilla.redhat.com/show_bug.cgi?id=1364132
>>>     <https://bugzilla.redhat.com/show_bug.cgi?id=1364132>).
>>>          After upgrade and restart of the vm, this should work, and
>>>     you should be able to connect to the console.
>>>     3. On the hosted engine host look at the content of:
>>>     /var/run/ovirt-hosted-engine-ha/vm.conf
>>>         Does it contain a graphical device? Or a console device?
>>>
>>>     Thanks,
>>>     Jenny
>>>
>>>
>>>     On Mon, Apr 10, 2017 at 11:44 AM, Martin Sivak
>>>     <msivak at redhat.com <mailto:msivak at redhat.com>> wrote:
>>>
>>>         Hi,
>>>
>>>         we are working on that, we can only ask for patience now,
>>>         Jenny was trying to find out what happened and how to fix it
>>>         all week.
>>>
>>>         Best regards
>>>
>>>         --
>>>         Martin Sivak
>>>         SLA / oVirt
>>>
>>>         On Mon, Apr 10, 2017 at 9:38 AM, Rafał Wojciechowski
>>>         <it at rafalwojciechowski.pl <mailto:it at rafalwojciechowski.pl>>
>>>         wrote:
>>>
>>>             hi,
>>>
>>>             I have similiar issue(I also started my mailthread)
>>>             after upgrade 4.0 to 4.1
>>>
>>>             Version 4.1.1.8-1.el7.centos (before it was some 4.1.0.x
>>>             or similiar - update not fixed it)
>>>
>>>             to run VM I have to set in Console tab Headless mode -
>>>             without it I got libvirtd segfault(logs attached in my
>>>             mailthread).
>>>
>>>             So I am able to run VMs only without Console - do you
>>>             also have to set headless before run VM?
>>>
>>>             I noticed that libvirt-daemon was also upgraded to 2.0
>>>             version during ovirt upgrade - I dont think that 4.1 was
>>>             not testes due to such libvirtd upgrade... but maybe?
>>>
>>>             Regards,
>>>             Rafal Wojciechowski
>>>
>>>             W dniu 10.04.2017 o 08:24, Arsène Gschwind pisze:
>>>>
>>>>             Hi,
>>>>
>>>>             After updating to oVirt 4.1.1 Async release i can
>>>>             confirm that the problem still persists.
>>>>
>>>>             Rgds,
>>>>             Arsène
>>>>
>>>>
>>>>             On 03/25/2017 12:25 PM, Arsène Gschwind wrote:
>>>>>
>>>>>             Hi,
>>>>>
>>>>>             After updating to 4.1.1 i'm observing the same
>>>>>             behavior, HE without any console.
>>>>>             Even when trying to edit the HE VMs it doesn't change
>>>>>             anything, Graphics stays to NONE.
>>>>>
>>>>>             Thanks for any Help.
>>>>>
>>>>>             Regards,
>>>>>             Arsène
>>>>>
>>>>>             On 03/24/2017 03:11 PM, Nelson Lameiras wrote:
>>>>>>             Hello,
>>>>>>
>>>>>>             When upgrading my test setup from 4.0 to 4.1, my
>>>>>>             engine vm lost it's console (from SPICE to None in GUI)
>>>>>>
>>>>>>             My test setup :
>>>>>>             2 manually built hosts using centos 7.3, ovirt 4.1
>>>>>>             1 manually built hosted engine centos 7.3, oVirt
>>>>>>             4.1.0.4-el7, accessible with SPICE console via GUI
>>>>>>
>>>>>>             I updated ovirt-engine from 4.1.0 to 4.1.1 by doing
>>>>>>             on engine :
>>>>>>             - yum update
>>>>>>             - engine-setup
>>>>>>             - reboot engine
>>>>>>
>>>>>>             When accessing 4.1.1 GUI, Graphics is set to "None"
>>>>>>             on "Virtual Machines" page, with "console button"
>>>>>>             greyed out (all other VMs have the same Graphics set
>>>>>>             to the same value as before)
>>>>>>             I tried to edit engine VM settings, and console
>>>>>>             options are same as before (SPLICE, QXL).
>>>>>>
>>>>>>             I'm hopping this is not a new feature, since if we
>>>>>>             loose network on engine, console is the only way to
>>>>>>             debug...
>>>>>>
>>>>>>             Is this a bug?
>>>>>>
>>>>>>             ps. I was able to reproduce this bug 2 times
>>>>>>
>>>>>>             cordialement, regards,
>>>>>>
>>>>>>             <https://www.lyra-network.com/>
>>>>>>             	
>>>>>>             Nelson LAMEIRAS
>>>>>>             Ingénieur Systèmes et Réseaux/ Systems and Networks
>>>>>>             engineer
>>>>>>             Tel: +33 5 32 09 09 70
>>>>>>             nelson.lameiras at lyra-network.com
>>>>>>             <mailto:nelson.lameiras at lyra-network.com>
>>>>>>             www.lyra-network.com <https://www.lyra-network.com/>
>>>>>>             | www.payzen.eu <https://payzen.eu>
>>>>>>
>>>>>>             <https://www.youtube.com/channel/UCrVl1CO_Jlu3KbiRH-tQ_vA>
>>>>>>             	<https://www.linkedin.com/company/lyra-network_2>
>>>>>>             	<https://twitter.com/LyraNetwork>
>>>>>>             	<https://payzen.eu>
>>>>>>
>>>>>>             ------------------------------------------------------------------------
>>>>>>
>>>>>>             Lyra Network, 109 rue de l'innovation, 31670 Labège,
>>>>>>             FRANCE
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>             _______________________________________________
>>>>>>             Users mailing list
>>>>>>             Users at ovirt.org <mailto:Users at ovirt.org>
>>>>>>             http://lists.ovirt.org/mailman/listinfo/users
>>>>>>             <http://lists.ovirt.org/mailman/listinfo/users>
>>>>>             -- 
>>>>>
>>>>>             *Arsène Gschwind* Fa. Sapify AG im Auftrag der
>>>>>             Universität Basel IT Services Klingelbergstr. 70 | 
>>>>>             CH-4056 Basel  |  Switzerland Tel. +41 79 449 25 63
>>>>>             <tel:+41%2079%20449%2025%2063>  | http://its.unibas.ch
>>>>>             <http://its.unibas.ch/> ITS-ServiceDesk:
>>>>>             support-its at unibas.ch <mailto:support-its at unibas.ch> |
>>>>>             +41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
>>>>>
>>>>>             _______________________________________________
>>>>>             Users mailing list
>>>>>             Users at ovirt.org <mailto:Users at ovirt.org>
>>>>>             http://lists.ovirt.org/mailman/listinfo/users
>>>>>             <http://lists.ovirt.org/mailman/listinfo/users>
>>>>             -- 
>>>>
>>>>             *Arsène Gschwind* Fa. Sapify AG im Auftrag der
>>>>             Universität Basel IT Services Klingelbergstr. 70 | 
>>>>             CH-4056 Basel  |  Switzerland Tel. +41 79 449 25 63
>>>>             <tel:+41%2079%20449%2025%2063>  | http://its.unibas.ch
>>>>             <http://its.unibas.ch/> ITS-ServiceDesk:
>>>>             support-its at unibas.ch <mailto:support-its at unibas.ch> |
>>>>             +41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
>>>>
>>>>             _______________________________________________
>>>>             Users mailing list
>>>>             Users at ovirt.org <mailto:Users at ovirt.org>
>>>>             http://lists.ovirt.org/mailman/listinfo/users
>>>>             <http://lists.ovirt.org/mailman/listinfo/users>
>>>             _______________________________________________ Users
>>>             mailing list Users at ovirt.org <mailto:Users at ovirt.org>
>>>             http://lists.ovirt.org/mailman/listinfo/users
>>>             <http://lists.ovirt.org/mailman/listinfo/users> 
>>>
>>     -- 
>>
>>     *Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel
>>     IT Services Klingelbergstr. 70 | CH-4056 Basel  | Switzerland
>>     Tel. +41 79 449 25 63 <tel:+41%2079%20449%2025%2063>  |
>>     http://its.unibas.ch <http://its.unibas.ch/> ITS-ServiceDesk:
>>     support-its at unibas.ch <mailto:support-its at unibas.ch> | +41 61 267
>>     14 11 <tel:+41%2061%20267%2014%2011>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170418/a80eaedb/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 3846 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170418/a80eaedb/attachment-0005.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1604 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170418/a80eaedb/attachment-0006.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1635 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170418/a80eaedb/attachment-0007.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1629 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170418/a80eaedb/attachment-0008.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1864 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170418/a80eaedb/attachment-0009.jpe>


More information about the Users mailing list