[ovirt-users] Failed deply of ovirt-engine using ovirt-node-ng-installer-ovirt-4.2-pre-2017120512.iso

Wed Dec 6 13:33:40 UTC 2017

It has worked.

Now additional (hopefully final) question.

In the blog
https://ovirt.org/blog/2017/04/up-and-running-with-ovirt-4.1-and-gluster-storage/
is written that selecting cluster, additional hosts should be visible.
These must be imported or detached.

I cannot see the additional hosts. Must I add them as new host ? Or this
means that the deploy hasn't finished correctly ?

Thanks in advance.

2017-12-06 13:47 GMT+01:00 Yedidyah Bar David <didi at redhat.com>:

> On Wed, Dec 6, 2017 at 2:29 PM, Simone Tiraboschi <stirabos at redhat.com>
> wrote:
>
>>
>>
>> On Wed, Dec 6, 2017 at 1:23 PM, Roberto Nunin <robnunin at gmail.com> wrote:
>>
>>> I've read the Bugzilla report, but after modify answer file, how to
>>> provide it to the Cockpit process ?
>>> I know that in the CLI installation it could be provided as aparameter
>>> of the CLI command, but in Cockpit.
>>>
>>
>> You are right, unfortunately we have to fix it: I don't see any possible
>> workaround at cockpit level.
>>
>
> Now pushed a simple fix:
>
> https://gerrit.ovirt.org/85142
>
> You can try using the jenkins-generated RPMs:
>
> http://jenkins.ovirt.org/job/ovirt-hosted-engine-setup_
> master_check-patch-el7-x86_64/1067/artifact/exported-artifacts/
>
>
>>
>> Directly running hosted-engine-setup from CLI instead should work.
>>
>>
>>>
>>> 2017-12-06 12:25 GMT+01:00 Yedidyah Bar David <didi at redhat.com>:
>>>
>>>> On Wed, Dec 6, 2017 at 1:10 PM, Roberto Nunin <robnunin at gmail.com>
>>>> wrote:
>>>>
>>>>> This is the first request, note that do not allow to add CIDR:
>>>>> [image: Immagine incorporata 1]
>>>>>
>>>>> 2017-12-06 11:54 GMT+01:00 Roberto Nunin <robnunin at gmail.com>:
>>>>>
>>>>>> Yes, both times on Cockpit.
>>>>>>
>>>>>> 2017-12-06 11:43 GMT+01:00 Simone Tiraboschi <stirabos at redhat.com>:
>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Dec 6, 2017 at 11:38 AM, Roberto Nunin <robnunin at gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Ciao Simone
>>>>>>>> thanks for really quick answer.
>>>>>>>>
>>>>>>>> 2017-12-06 11:05 GMT+01:00 Simone Tiraboschi <stirabos at redhat.com>:
>>>>>>>>
>>>>>>>>> Ciao Roberto,
>>>>>>>>>
>>>>>>>>> On Wed, Dec 6, 2017 at 10:02 AM, Roberto Nunin <robnunin at gmail.com
>>>>>>>>> > wrote:
>>>>>>>>>
>>>>>>>>>> I'm having trouble to deploy one three host hyperconverged lab
>>>>>>>>>> using iso-image named above.
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Please note that ovirt-node-ng-installer-ovirt-4.2-pre-2017120512
>>>>>>>>> <%28201%29%20712-0512>.iso is still a pre-release software.
>>>>>>>>> Your contribute testing it is really appreciated!
>>>>>>>>>
>>>>>>>>
>>>>>>>> It's a pleasure !.
>>>>>>>>
>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> My test environment is based on HPE BL680cG7 blade servers.
>>>>>>>>>> These servers has 6 physical 10GB network interfaces (flexNIC),
>>>>>>>>>> each one with four profiles (ethernet,FCoE,iSCSI,etc).
>>>>>>>>>>
>>>>>>>>>> I choose one of these six phys interfaces (enp5s0f0) and assigned
>>>>>>>>>> it a static IPv4 address, for each node.
>>>>>>>>>>
>>>>>>>>>> After node reboot, interface ONBOOT param is still set to no.
>>>>>>>>>> Changed via iLO interface to yes and restarted network. Fine.
>>>>>>>>>>
>>>>>>>>>> After gluster setup, with gdeploy script under Cockpit interface,
>>>>>>>>>> avoiding errors coming from :
>>>>>>>>>> /usr/share/gdepply/scripts/blacklist_all_disks.sh, start
>>>>>>>>>> hosted-engine deploy.
>>>>>>>>>>
>>>>>>>>>> With the new version, I'm having an error never seen before:
>>>>>>>>>>
>>>>>>>>>> The Engine VM (10.114.60.117) and this host (10.114.60.134/24)
>>>>>>>>>> will not be in the same IP subnet. Static routing configuration are not
>>>>>>>>>> supported on automatic VM configuration.
>>>>>>>>>>  Failed to execute stage 'Environment customization': The Engine
>>>>>>>>>> VM (10.114.60.117) and this host (10.114.60.134/24) will not be
>>>>>>>>>> in the same IP subnet. Static routing configuration are not supported on
>>>>>>>>>> automatic VM configuration.
>>>>>>>>>>  Hosted Engine deployment failed.
>>>>>>>>>>
>>>>>>>>>> There's no input field for HE subnet mask. Anyway in our class-c
>>>>>>>>>> ovirt management network these ARE in the same subnet.
>>>>>>>>>> How to recover from this ? I cannot add /24 CIDR in HE Static IP
>>>>>>>>>> address field, it isn't allowed.
>>>>>>>>>>
>>>>>>>>>
>>>> Incidentally, we also got now another similar report:
>>>>
>>>> https://bugzilla.redhat.com/show_bug.cgi?id=1522712
>>>>
>>>> Perhaps a new regression? Although I can't see where it happened.
>>>>
>>>>
>>>>>
>>>>>>>>> 10.114.60.117 and 10.114.60.134/24 are in the same IPv4 /24
>>>>>>>>> subnet so it should't fail.
>>>>>>>>> The issue here seams different:
>>>>>>>>>
>>>>>>>>> From hosted-engine-setup log I see that you passed the VM IP
>>>>>>>>> address via answerfile:
>>>>>>>>> 2017-12-06 09:14:30,195+0100 DEBUG otopi.context
>>>>>>>>> context.dumpEnvironment:831 ENV OVEHOSTED_VM/cloudinitVMStatic
>>>>>>>>> CIDR=str:'10.114.60.117'
>>>>>>>>>
>>>>>>>>> while the right syntax should be:
>>>>>>>>> OVEHOSTED_VM/cloudinitVMStaticCIDR=str:10.114.60.117/24
>>>>>>>>>
>>>>>>>>> Did you wrote the answerfile by yourself or did you entered the IP
>>>>>>>>> address in the cockpit wizard? if so we probably have a regression there.
>>>>>>>>>
>>>>>>>>
>>>>>>>> I've inserted it while providing data for setup, using Cockpit
>>>>>>>> interface. Tried to add CIDR (/24), but it isn't allowed from Cockpit web
>>>>>>>> interface. No manual update of answer file.
>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Moreover, VM FQDN is asked two times during the deploy process.
>>>>>>>>>> It's correct ?
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> No, I don't think so but I don't see it from you logs.
>>>>>>>>> Could you please explain it?
>>>>>>>>>
>>>>>>>>
>>>>>>>> Yes: first time is requested during initial setup of HE VM deploy
>>>>>>>>
>>>>>>>> The second one, instead, is asked (at least to me ) in this step,
>>>>>>>> after initial setup:
>>>>>>>>
>>>>>>>
>>>>>>> So both on cockpit side?
>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>> [image: Immagine incorporata 1]
>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Some additional, general questions:
>>>>>>>>>> NetworkManager: must be disabled deploying HCI solution ? In my
>>>>>>>>>> attempt, wasn't disabled.
>>>>>>>>>>
>>>>>>>>>
>>>>>>>> Simone, could you confirm or not that NM must stay in place while
>>>>>>>> deploying ? This qustion was struggling since 3.6...... what is the "best
>>>>>>>> practice" ?
>>>>>>>> All of mine RHV environments (3.6 - 4.0.1 - 4.1.6 ) have it
>>>>>>>> disabled, but I wasn't able to find any mandatory rule.
>>>>>>>>
>>>>>>>
>>>>>>> In early 3.6 you had to disable it but now you can safely keep it on.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> 
>>>>>>>>
>>>>>>>>> There's some document to follow to perform a correct deploy ?
>>>>>>>>>> Is this one still "valid" ? : https://ovirt.org/blog/2017/
>>>>>>>>>> 04/up-and-running-with-ovirt-4.1-and-gluster-storage/
>>>>>>>>>>
>>>>>>>>>> Attached hosted-engine-setup log.
>>>>>>>>>> TIA
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Roberto
>>>>>>>>>> 110-006-970
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> Users mailing list
>>>>>>>>>> Users at ovirt.org
>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Roberto Nunin
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Roberto Nunin
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Roberto Nunin
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at ovirt.org
>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Didi
>>>>
>>>
>>>
>>>
>>> --
>>> Roberto Nunin
>>>
>>>
>>>
>>>
>>
>
>
> --
> Didi
>

-- 
Roberto Nunin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20171206/190429be/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 60434 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/users/attachments/20171206/190429be/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 55033 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/users/attachments/20171206/190429be/attachment-0001.png>