[ovirt-users] Failed deply of ovirt-engine using ovirt-node-ng-installer-ovirt-4.2-pre-2017120512.iso
Simone Tiraboschi
stirabos at redhat.com
Wed Dec 6 16:18:16 UTC 2017
On Wed, Dec 6, 2017 at 5:00 PM, Roberto Nunin <robnunin at gmail.com> wrote:
>
>
> 2017-12-06 15:29 GMT+01:00 Simone Tiraboschi <stirabos at redhat.com>:
>
>>
>>
>> On Wed, Dec 6, 2017 at 2:33 PM, Roberto Nunin <robnunin at gmail.com> wrote:
>>
>>> It has worked.
>>>
>>
>> Thanks!
>>
>>
>>>
>>> Now additional (hopefully final) question.
>>>
>>> In the blog https://ovirt.org/blog/2017/04/up-and-running-with-ovir
>>> t-4.1-and-gluster-storage/ is written that selecting cluster,
>>> additional hosts should be visible.
>>> These must be imported or detached.
>>>
>>> I cannot see the additional hosts. Must I add them as new host ?
>>>
>>
>> Yes, please follow this section:
>> https://ovirt.org/blog/2017/04/up-and-running-with-ovirt-4.
>> 1-and-gluster-storage/#configuring-hosts-two-and-three-for-hosted-engine
>>
>
> Ciao SImone
>
> I've followed the procedure (extracted from the same blog I've mentioned
> in my email), but if I add host 2 and 3 instead to import them, no chance
> to "see" something when I'm going to add the data domain:
>
If I'm not wrong, you have to create the gluster data storage domain
checking the box "Use managed gluster" before adding your additional two
hosts.
Once that SD will be there, the data center will go up triggering the auto
import of the hosted engine storage domain.
Only at that point you will be able to correctly add the remaining hosts.
>
> [image: Immagine incorporata 1]
>
> nothing appear in the drop-down list, while glusterd is running on all
> three nodes:
>
>
> aps-te68-mng.example.com: Status of volume: data
> aps-te68-mng.example.com: Gluster process TCP
> Port RDMA Port Online Pid
> aps-te68-mng.example.com: ------------------------------
> ------------------------------------------------
> aps-te68-mng.example.com: Brick aps-te61-mng.example.com:/gluster_bric
> aps-te68-mng.example.com: ks/data/data
> 49153 0 Y 64531
> aps-te68-mng.example.com: Brick aps-te64-mng.example.com:/gluster_bric
> aps-te68-mng.example.com: ks/data/data
> 49153 0 Y 65012
> aps-te68-mng.example.com: Brick aps-te68-mng.example.com:/gluster_bric
> aps-te68-mng.example.com: ks/data/data
> 49155 0 Y 75603
> aps-te68-mng.example.com: Self-heal Daemon on localhost
> N/A N/A Y 75690
> aps-te68-mng.example.com: Self-heal Daemon on aps-te64-mng.example.com
> N/A N/A Y 75675
> aps-te68-mng.example.com: Self-heal Daemon on aps-te61-mng.example.com
> N/A N/A Y 12170
> aps-te68-mng.example.com:
> aps-te68-mng.example.com: Task Status of Volume data
> aps-te68-mng.example.com: ------------------------------
> ------------------------------------------------
> aps-te68-mng.example.com: There are no active volume tasks
> aps-te68-mng.example.com:
> aps-te61-mng.example.com: Status of volume: data
> aps-te61-mng.example.com: Gluster process TCP
> Port RDMA Port Online Pid
> aps-te61-mng.example.com: ------------------------------
> ------------------------------------------------
> aps-te61-mng.example.com: Brick aps-te61-mng.example.com:/gluster_bric
> aps-te61-mng.example.com: ks/data/data
> 49153 0 Y 64531
> aps-te61-mng.example.com: Brick aps-te64-mng.example.com:/gluster_bric
> aps-te61-mng.example.com: ks/data/data
> 49153 0 Y 65012
> aps-te61-mng.example.com: Brick aps-te68-mng.example.com:/gluster_bric
> aps-te61-mng.example.com: ks/data/data
> 49155 0 Y 75603
> aps-te61-mng.example.com: Self-heal Daemon on localhost
> N/A N/A Y 12170
> aps-te61-mng.example.com: Self-heal Daemon on aps-te64-mng.example.com
> N/A N/A Y 75675
> aps-te61-mng.example.com: Self-heal Daemon on aps-te68-mng.example.com
> N/A N/A Y 75690
> aps-te61-mng.example.com:
> aps-te61-mng.example.com: Task Status of Volume data
> aps-te61-mng.example.com: ------------------------------
> ------------------------------------------------
> aps-te61-mng.example.com: There are no active volume tasks
> aps-te61-mng.example.com:
> aps-te64-mng.example.com: Status of volume: data
> aps-te64-mng.example.com: Gluster process TCP
> Port RDMA Port Online Pid
> aps-te64-mng.example.com: ------------------------------
> ------------------------------------------------
> aps-te64-mng.example.com: Brick aps-te61-mng.example.com:/gluster_bric
> aps-te64-mng.example.com: ks/data/data
> 49153 0 Y 64531
> aps-te64-mng.example.com: Brick aps-te64-mng.example.com:/gluster_bric
> aps-te64-mng.example.com: ks/data/data
> 49153 0 Y 65012
> aps-te64-mng.example.com: Brick aps-te68-mng.example.com:/gluster_bric
> aps-te64-mng.example.com: ks/data/data
> 49155 0 Y 75603
> aps-te64-mng.example.com: Self-heal Daemon on localhost
> N/A N/A Y 75675
> aps-te64-mng.example.com: Self-heal Daemon on aps-te68-mng.example.com
> N/A N/A Y 75690
> aps-te64-mng.example.com: Self-heal Daemon on aps-te61-mng.example.com
> N/A N/A Y 12170
> aps-te64-mng.example.com:
> aps-te64-mng.example.com: Task Status of Volume data
> aps-te64-mng.example.com: ------------------------------
> ------------------------------------------------
> aps-te64-mng.example.com: There are no active volume tasks
> aps-te64-mng.example.com:
>
>
> Unfortunately, no way to import host 2 and 3. Searched around all the GUI,
> without success.
> Did you've any hints to suggest ?
>
>
> Thanks
>
>>
>>
>>
>>
>>> Or this means that the deploy hasn't finished correctly ?
>>>
>>> Thanks in advance.
>>>
>>>
>>>
>>> 2017-12-06 13:47 GMT+01:00 Yedidyah Bar David <didi at redhat.com>:
>>>
>>>> On Wed, Dec 6, 2017 at 2:29 PM, Simone Tiraboschi <stirabos at redhat.com>
>>>> wrote:
>>>>
>>>>>
>>>>>
>>>>> On Wed, Dec 6, 2017 at 1:23 PM, Roberto Nunin <robnunin at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> I've read the Bugzilla report, but after modify answer file, how to
>>>>>> provide it to the Cockpit process ?
>>>>>> I know that in the CLI installation it could be provided as
>>>>>> aparameter of the CLI command, but in Cockpit.
>>>>>>
>>>>>
>>>>> You are right, unfortunately we have to fix it: I don't see any
>>>>> possible workaround at cockpit level.
>>>>>
>>>>
>>>> Now pushed a simple fix:
>>>>
>>>> https://gerrit.ovirt.org/85142
>>>>
>>>> You can try using the jenkins-generated RPMs:
>>>>
>>>> http://jenkins.ovirt.org/job/ovirt-hosted-engine-setup_maste
>>>> r_check-patch-el7-x86_64/1067/artifact/exported-artifacts/
>>>>
>>>>
>>>>>
>>>>> Directly running hosted-engine-setup from CLI instead should work.
>>>>>
>>>>>
>>>>>>
>>>>>> 2017-12-06 12:25 GMT+01:00 Yedidyah Bar David <didi at redhat.com>:
>>>>>>
>>>>>>> On Wed, Dec 6, 2017 at 1:10 PM, Roberto Nunin <robnunin at gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> This is the first request, note that do not allow to add CIDR:
>>>>>>>> [image: Immagine incorporata 1]
>>>>>>>>
>>>>>>>> 2017-12-06 11:54 GMT+01:00 Roberto Nunin <robnunin at gmail.com>:
>>>>>>>>
>>>>>>>>> Yes, both times on Cockpit.
>>>>>>>>>
>>>>>>>>> 2017-12-06 11:43 GMT+01:00 Simone Tiraboschi <stirabos at redhat.com>
>>>>>>>>> :
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Wed, Dec 6, 2017 at 11:38 AM, Roberto Nunin <
>>>>>>>>>> robnunin at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Ciao Simone
>>>>>>>>>>> thanks for really quick answer.
>>>>>>>>>>>
>>>>>>>>>>> 2017-12-06 11:05 GMT+01:00 Simone Tiraboschi <
>>>>>>>>>>> stirabos at redhat.com>:
>>>>>>>>>>>
>>>>>>>>>>>> Ciao Roberto,
>>>>>>>>>>>>
>>>>>>>>>>>> On Wed, Dec 6, 2017 at 10:02 AM, Roberto Nunin <
>>>>>>>>>>>> robnunin at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> I'm having trouble to deploy one three host hyperconverged lab
>>>>>>>>>>>>> using iso-image named above.
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Please note that ovirt-node-ng-installer-ovirt-4.2-pre-
>>>>>>>>>>>> 2017120512 <%28201%29%20712-0512>.iso is still a pre-release
>>>>>>>>>>>> software.
>>>>>>>>>>>> Your contribute testing it is really appreciated!
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> It's a pleasure !.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> My test environment is based on HPE BL680cG7 blade servers.
>>>>>>>>>>>>> These servers has 6 physical 10GB network interfaces
>>>>>>>>>>>>> (flexNIC), each one with four profiles (ethernet,FCoE,iSCSI,etc).
>>>>>>>>>>>>>
>>>>>>>>>>>>> I choose one of these six phys interfaces (enp5s0f0) and
>>>>>>>>>>>>> assigned it a static IPv4 address, for each node.
>>>>>>>>>>>>>
>>>>>>>>>>>>> After node reboot, interface ONBOOT param is still set to no.
>>>>>>>>>>>>> Changed via iLO interface to yes and restarted network. Fine.
>>>>>>>>>>>>>
>>>>>>>>>>>>> After gluster setup, with gdeploy script under Cockpit
>>>>>>>>>>>>> interface, avoiding errors coming from :
>>>>>>>>>>>>> /usr/share/gdepply/scripts/blacklist_all_disks.sh, start
>>>>>>>>>>>>> hosted-engine deploy.
>>>>>>>>>>>>>
>>>>>>>>>>>>> With the new version, I'm having an error never seen before:
>>>>>>>>>>>>>
>>>>>>>>>>>>> The Engine VM (10.114.60.117) and this host (10.114.60.134/24)
>>>>>>>>>>>>> will not be in the same IP subnet. Static routing configuration are not
>>>>>>>>>>>>> supported on automatic VM configuration.
>>>>>>>>>>>>> Failed to execute stage 'Environment customization': The
>>>>>>>>>>>>> Engine VM (10.114.60.117) and this host (10.114.60.134/24)
>>>>>>>>>>>>> will not be in the same IP subnet. Static routing configuration are not
>>>>>>>>>>>>> supported on automatic VM configuration.
>>>>>>>>>>>>> Hosted Engine deployment failed.
>>>>>>>>>>>>>
>>>>>>>>>>>>> There's no input field for HE subnet mask. Anyway in our
>>>>>>>>>>>>> class-c ovirt management network these ARE in the same subnet.
>>>>>>>>>>>>> How to recover from this ? I cannot add /24 CIDR in HE Static
>>>>>>>>>>>>> IP address field, it isn't allowed.
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>> Incidentally, we also got now another similar report:
>>>>>>>
>>>>>>> https://bugzilla.redhat.com/show_bug.cgi?id=1522712
>>>>>>>
>>>>>>> Perhaps a new regression? Although I can't see where it happened.
>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>>>>>> 10.114.60.117 and 10.114.60.134/24 are in the same IPv4 /24
>>>>>>>>>>>> subnet so it should't fail.
>>>>>>>>>>>> The issue here seams different:
>>>>>>>>>>>>
>>>>>>>>>>>> From hosted-engine-setup log I see that you passed the VM IP
>>>>>>>>>>>> address via answerfile:
>>>>>>>>>>>> 2017-12-06 09:14:30,195+0100 DEBUG otopi.context
>>>>>>>>>>>> context.dumpEnvironment:831 ENV OVEHOSTED_VM/cloudinitVMStatic
>>>>>>>>>>>> CIDR=str:'10.114.60.117'
>>>>>>>>>>>>
>>>>>>>>>>>> while the right syntax should be:
>>>>>>>>>>>> OVEHOSTED_VM/cloudinitVMStaticCIDR=str:10.114.60.117/24
>>>>>>>>>>>>
>>>>>>>>>>>> Did you wrote the answerfile by yourself or did you entered the
>>>>>>>>>>>> IP address in the cockpit wizard? if so we probably have a regression there.
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> I've inserted it while providing data for setup, using Cockpit
>>>>>>>>>>> interface. Tried to add CIDR (/24), but it isn't allowed from Cockpit web
>>>>>>>>>>> interface. No manual update of answer file.
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Moreover, VM FQDN is asked two times during the deploy
>>>>>>>>>>>>> process. It's correct ?
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> No, I don't think so but I don't see it from you logs.
>>>>>>>>>>>> Could you please explain it?
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Yes: first time is requested during initial setup of HE VM
>>>>>>>>>>> deploy
>>>>>>>>>>>
>>>>>>>>>>> The second one, instead, is asked (at least to me ) in this
>>>>>>>>>>> step, after initial setup:
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> So both on cockpit side?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> [image: Immagine incorporata 1]
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Some additional, general questions:
>>>>>>>>>>>>> NetworkManager: must be disabled deploying HCI solution ? In
>>>>>>>>>>>>> my attempt, wasn't disabled.
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>> Simone, could you confirm or not that NM must stay in place
>>>>>>>>>>> while deploying ? This qustion was struggling since 3.6...... what is the
>>>>>>>>>>> "best practice" ?
>>>>>>>>>>> All of mine RHV environments (3.6 - 4.0.1 - 4.1.6 ) have it
>>>>>>>>>>> disabled, but I wasn't able to find any mandatory rule.
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> In early 3.6 you had to disable it but now you can safely keep it
>>>>>>>>>> on.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>> There's some document to follow to perform a correct deploy ?
>>>>>>>>>>>>> Is this one still "valid" ? : https://ovirt.org/blog/2017/
>>>>>>>>>>>>> 04/up-and-running-with-ovirt-4.1-and-gluster-storage/
>>>>>>>>>>>>>
>>>>>>>>>>>>> Attached hosted-engine-setup log.
>>>>>>>>>>>>> TIA
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> Roberto
>>>>>>>>>>>>> 110-006-970
>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> Users mailing list
>>>>>>>>>>>>> Users at ovirt.org
>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> Roberto Nunin
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Roberto Nunin
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Roberto Nunin
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Users mailing list
>>>>>>>> Users at ovirt.org
>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Didi
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Roberto Nunin
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Didi
>>>>
>>>
>>>
>>>
>>> --
>>> Roberto Nunin
>>>
>>>
>>>
>>>
>>
>
>
> --
> Roberto Nunin
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20171206/e9483ca7/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 60434 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/users/attachments/20171206/e9483ca7/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 55033 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/users/attachments/20171206/e9483ca7/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 61476 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/users/attachments/20171206/e9483ca7/attachment-0002.png>
More information about the Users
mailing list