[ovirt-users] Self-Hosted engine 4.1.7 unavailable from the outside of the host

Matteo Capuano kapu.net at gmail.com
Mon Dec 18 21:15:58 UTC 2017


Now it works like a charm !!  Thanks again Simone.

On Mon, Dec 18, 2017 at 12:29 PM, Matteo Capuano <kapu.net at gmail.com> wrote:

>
>
> On Mon, Dec 18, 2017 at 11:19 AM, Simone Tiraboschi <stirabos at redhat.com>
> wrote:
>
>>
>>
>> On Mon, Dec 18, 2017 at 11:09 AM, Matteo Capuano <kapu.net at gmail.com>
>> wrote:
>>
>>>
>>>
>>> On Mon, Dec 18, 2017 at 8:55 AM, Simone Tiraboschi <stirabos at redhat.com>
>>> wrote:
>>>
>>>>
>>>>
>>>> On Sat, Dec 16, 2017 at 1:29 PM, Matteo Capuano <kapu.net at gmail.com>
>>>> wrote:
>>>>
>>>>> Hi everyone, my name’s Matteo and I’m a new oVirt user.
>>>>>
>>>>> I’m trying to install the gluster hyperconverged solution in a lab
>>>>> environment following the How-To wrote by Jason Brooks:
>>>>>
>>>>> https://ovirt.org/blog/2017/04/up-and-running-with-ovirt-4.1
>>>>> -and-gluster-storage/
>>>>>
>>>>> Sadly, I cannot understand how to configure the network on the
>>>>> self-hosted engine and I’m unable to make it available from outside the
>>>>> host.
>>>>>
>>>>> As written in the HowTo I created three hosts (ovirt-note 4.1.7) each
>>>>> one with two nics, one for gluster and one for management, the network is a
>>>>> static LAN with FQDN resolvable (also reverse) by a local DNS. Here the
>>>>> details:
>>>>>
>>>>> Gateway: 172.16.1.1
>>>>>
>>>>> DNS: 172.16.1.12
>>>>>
>>>>> Host1: 172.16.1.210 (management) – 172.16.2.210 (gluster)
>>>>>
>>>>> Host2: 172.16.1.220 (management) – 172.16.2.220 (gluster)
>>>>>
>>>>> Host3: 172.16.1.230 (management) – 172.16.2.230 (gluster)
>>>>>
>>>>> Engine: 172.16.1.200
>>>>>
>>>>> When installing the engine I choose to brigde the management’s nic
>>>>> (172.16.1.210) of host1 but, once the installation is completed, I'm unable
>>>>> to reach the engine from the LAN where the hosts are connected. The engine
>>>>> (172.16.1.200) can ping only host1 (172.16.1.210) and only host1 can ping
>>>>> the engine.
>>>>>
>>>>> As far as my network knowledge goes, to make the engine available from
>>>>> the outside of host1 I would need to use a third nic or to use some device
>>>>> to associate the ip and MAC address of the engine’s nic.
>>>>>
>>>> Ciao Matteo,
>>>> no, hosted-engine-setup should create a bridge for you.
>>>> No need to do custom configuration to expose your VMs.
>>>>
>>>> Are you trying on bare metal or on VMs with the engine VM as a nested
>>>> VM?
>>>>
>>>
>>> Ciao Simone,
>>>
>>> thank you for your answer.
>>>
>>> My lab is a nested environmet. I installed ovirt on bare metal with the
>>> engine on another machine. On this setup i have 6 VMs:
>>>
>>> - 172.16.1.1  pfSense as firewall/gateway
>>> - 172.16.1.10  a windows 2016 used as network guest
>>> - 172.16.1.12  a nethserver installation as DNS server ( also on
>>> 172.16.2.12 )
>>> - the three ovirt-nodes as i described on my e-mail
>>>
>>> All the machines are pingable, only the engine inside host 1 is
>>> unreachable and can ping only host1.
>>>
>>
>> OK, your issue is caused by vdsm-no-mac-spoofing filter on your L1 VMs.
>> Please create a custom vNic profile on your external oVirt engine setting
>> the "network filter" field to "no network filter".
>> Now you can edit your ovirt-node VMs setting the network profile of the
>> nics you are going to use for the management bridge to the profile with "no
>> network filter".
>> You have to shutdown and restart your ovirt-node VMs and then you could
>> retry the deployment.
>>
>
>
> Thank you for the explanation, I'm going to try it in the evening. I'll
> keep you posted.
>
> Cheers
>
>
>>
>>
>>
>>>
>>>
>>> Cheers
>>>
>>> Matteo
>>>
>>>
>>>>
>>>>> I’ve looked around over the internet for a solution but every how-to
>>>>> I’ve found follows the same steps of Jason’s.  I’ve also already
>>>>> asked for help to Jason.
>>>>>
>>>>> Anyone could help me to solve this issue?
>>>>>
>>>>>
>>>>>
>>>>> Thank you
>>>>>
>>>>>
>>>>>
>>>>> Matteo
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at ovirt.org
>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20171218/f5abb111/attachment.html>


More information about the Users mailing list