[ovirt-users] Multipath handling in oVirt

[Nicolas Ecarnot]

Le 01/02/2017 à 15:31, Yura Poltoratskiy a écrit :
> Here you are:
>
> iSCSI multipathing
> <https://dl.dropboxusercontent.com/u/106774860/iSCSI_multipathing.png>
>
> network setup of a host
> <https://dl.dropboxusercontent.com/u/106774860/host_network.png>
>
>
>
> 01.02.2017 15:31, Nicolas Ecarnot пишет:
>> Hello,
>>
>> Before replying further, may I ask you, Yura, to post a screenshot of
>> your iSCSI multipathing setup in the web GUI?
>>
>> And also the same for the network setup of a host ?
>>
>> Thank you.
>>
>

Thank you Yura.

To Yaniv and Pavel, yes, this leads to this oVirt feature of iSCSI 
multipathing, indeed.

I would be curious to see (on Yura's hosts for instance) the translation 
of the oVirt iSCSI multipathing in CLI commands (multipath -ll, iscsiadm 
-m session -P3, dmsetup table, ...)

Yura's setup seems to be perfectly fitted to oVirt (2 NICs, 2 VLANs, 2 
targets in different VLANs, iSCSI multipathing), but I'm trying to see 
how I could make this work with our Equallogic presenting one and only 
one virtual ip (thus one target VLAN)...

-- 
Nicolas ECARNOT