[ovirt-users] Ovirt FQDN

[rightkicktech.gmail.com]

Hi,

I put space instead of comma.
I confirm now that I have access on FQDN, IP and localhost.

Many thanx!

Alex

On January 27, 2017 2:47:27 PM EET, "Juan Hernández" <jhernand at redhat.com> wrote:
>On 01/27/2017 01:40 PM, rightkicktech.gmail.com wrote:
>> Hi,
>> 
>> To clarify my previous. When adding localhost at
>> SSO_ALTERNATE_ENGINE_FQDNS="localhost", then i was able to access
>> through port forwarding. I tried to add IP and localhost, comma
>> separated SSO_ALTERNATE_ENGINE_FQDNS="10.0.0.10
>> <http://10.0.0.10>,localhost", and in this case i could not use
>localhost.
>> Does this variable accepts comma separated values?
>> 
>
>It is a space separated list. It is documented here:
>
>
>https://github.com/oVirt/ovirt-engine/blob/master/packaging/services/ovirt-engine/ovirt-engine.conf.in#L363-L366
>
>> Thanx for the socks proxy. Yes, thats my last tactic when facing
>issues
>> with port forwarding, though i need to go through two hops and makes
>it
>> a bit more complex. The first hop does not have direct access to
>> destination network and I dont have direct SSH access to final hop.
>> 
>> I will also add a custom config next to 11-setup-sso.conf file. Thanx
>> for pointing it out.
>> 
>> Alex
>> 
>> 
>> On January 27, 2017 1:32:14 PM EET, "Juan Hernández"
>> <jhernand at redhat.com> wrote:
>> 
>>     On 01/27/2017 11:56 AM, Alex wrote:
>> 
>>         Hi,
>> 
>>         I added the IP address at 11-setup-sso.conf (found at
>>         /etc/ovirt-engine/engine.conf.d), at line
>>         SSO_ALTERNATE_ENGINE_FQDNS="IP".
>>         Then restarted engine.
>>         I can access now engine vm using IP, but I cannot when
>connecting
>>         remotely using localhost and port forwarding through ssh. I
>>         tried to add
>>         also localhost as alternate fqdn without any luck.
>>         Any idea?
>> 
>>         Many thanx,
>>         Alex
>> 
>> 
>>     Make sure to include also the port number that you are using. For
>>     example, if you are using port 10000 then you will need this:
>> 
>>       SSO_ALTERNATE_ENGINE_FQDNS="localhost:10000"
>> 
>>     I'd also suggest to avoid modifying the 11-setup-sso.conf file,
>as it
>>     will be overwritten if you run 'engine-setup' again, during !
>>      an
>>     upgrade,
>>     for example. Instead of that try to create your own 99-my.conf
>file, for
>>     example.
>> 
>>     Also, if you want this just for SSH, I'd suggest to use the SSH
>SOCKS
>>     proxy support instead. For example, I reach all my systems via
>SSH,
>>     using 'server.example.com <http://server.example.com>' as the SSH
>gateway. I start SSH like this:
>> 
>>       ssh -D 127.0.0.1:10000 server.example.com
><http://server.example.com>
>> 
>>     And then I configure my browser to use 127.0.0.1:10000 as SOCKS
>proxy
>>     for *.example.com <http://example.com>.
>> 
>> 
>>         On January 27, 2017 1:10:33 AM GMT+02:00, Alex
>>         <rightkicktech at gmail.com>
>>         wrote:
>> 
>>         Thank you Martin.
>>         I will check that.
>> 
>>         On January 26, 2! 017 9:39:42 PM GMT+02:00, Martin Perina
>>         <mperina at redhat.com> wrote:
>> 
>>         Hi,
>> 
>>         please take a look at [1], since oVirt 4.0.4 you can defined
>>         alternate names (or IPs) to access engine.
>> 
>>         Regards
>> 
>>         Martin Perina
>> 
>>         [1] https://bugzilla.redhat.com/show_bug.cgi?id=1325746
>> 
>> 
>>         On Thu, Jan 26, 2017 at 6:59 PM, rightkicktech.gmail.com
>>         <http://rightkicktech.gmail.com>
>>         <http://rightkicktech.gmail.com> <rightkicktech at gmail.com
>>         <mailto:rightkicktech at gmail.com>> wrote:
>> 
>>         Hi all,
>> 
>>         Is there any way to bypass the FQDN access requirement on
>>         ovirt 4? On previous versions I was able to access ovirt
>>         engine us! ing IP. It is impractical to access with FQDN when
>>         doing remote port forwarding.
>> 
>>         Thanx,
>>         Alex
>>         -- 
>>         Sent from my Android device with K-9 Mail. Please excuse my
>>         brevity.
>>        
>------------------------------------------------------------------------
>> 
>>         Users mailing list
>>         Users at ovirt.org <mailto:Users at ovirt.org>
>>         http://lists.ovirt.org/mailman/listinfo/users
>>         <http://lists.ovirt.org/mailman/listinfo/users>
>> 
>> 
>> 
>> 
>>         -- 
>>         Sent from my Android device with K-9 Mail. Please excuse my
>brevity.
>> 
>> 
>>        
>------------------------------------------------------------------------
>> 
>>         Users mailing list
>>         Users at ovirt.org
>>         http://lists.ovirt.org/mailman/listinfo/users
>> 
>> 
>> 
>> -- 
>> Sent from my Android device with K-9 Mail. Please excuse my brevity.

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170127/9098f6ea/attachment.html>