[ovirt-users] oVirt gluster sanlock issue
Krutika Dhananjay
kdhananj at redhat.com
Tue Jun 6 09:50:13 UTC 2017
OK.
So for the 'Transport endpoint is not connected' issue, could you share the
mount and brick logs?
Hmmm.. 'Invalid argument' error even on the root partition. What if you
change bs to 4096 and run?
The logs I showed in my earlier mail shows that gluster is merely returning
the error it got from the disk file system where the
brick is hosted. But you're right about the fact that the offset 127488 is
not 4K-aligned.
If the dd on /root worked for you with bs=4096, could you try the same
directly on gluster mount point on a dummy file and capture the strace
output of dd?
You can perhaps reuse your existing gluster volume by mounting it at
another location and doing the dd.
Here's what you need to execute:
strace -ff -T -p <pid-of-mount-process> -o
<path-to-the-file-where-you-want-the-output-saved>`
FWIW, here's something I found in man(2) open:
*Under Linux 2.4, transfer sizes, and the alignment of the user
buffer and the file offset must all be multiples of the logical block size
of the filesystem. Since Linux 2.6.0, alignment to the logical block size
of the underlying storage (typically 512 bytes) suffices. The
logical block size can be determined using the ioctl(2) BLKSSZGET operation
or from the shell using the command: blockdev --getss*
-Krutika
On Tue, Jun 6, 2017 at 1:18 AM, Abi Askushi <rightkicktech at gmail.com> wrote:
> Also when testing with dd i get the following:
>
> *Testing on the gluster mount: *
> dd if=/dev/zero of=/rhev/data-center/mnt/glusterSD/10.100.100.1:_engine/test2.img
> oflag=direct bs=512 count=1
> dd: error writing β/rhev/data-center/mnt/glusterSD/10.100.100.1:_engine/test2.imgβ:
> *Transport endpoint is not connected*
> 1+0 records in
> 0+0 records out
> 0 bytes (0 B) copied, 0.00336755 s, 0.0 kB/s
>
> *Testing on the /root directory (XFS): *
> dd if=/dev/zero of=/test2.img oflag=direct bs=512 count=1
> dd: error writing β/test2.imgβ:* Invalid argument*
> 1+0 records in
> 0+0 records out
> 0 bytes (0 B) copied, 0.000321239 s, 0.0 kB/s
>
> Seems that the gluster is trying to do the same and fails.
>
>
>
> On Mon, Jun 5, 2017 at 10:10 PM, Abi Askushi <rightkicktech at gmail.com>
> wrote:
>
>> The question that rises is what is needed to make gluster aware of the 4K
>> physical sectors presented to it (the logical sector is also 4K). The
>> offset (127488) at the log does not seem aligned at 4K.
>>
>> Alex
>>
>> On Mon, Jun 5, 2017 at 2:47 PM, Abi Askushi <rightkicktech at gmail.com>
>> wrote:
>>
>>> Hi Krutika,
>>>
>>> I am saying that I am facing this issue with 4k drives. I never
>>> encountered this issue with 512 drives.
>>>
>>> Alex
>>>
>>> On Jun 5, 2017 14:26, "Krutika Dhananjay" <kdhananj at redhat.com> wrote:
>>>
>>>> This seems like a case of O_DIRECT reads and writes gone wrong, judging
>>>> by the 'Invalid argument' errors.
>>>>
>>>> The two operations that have failed on gluster bricks are:
>>>>
>>>> [2017-06-05 09:40:39.428979] E [MSGID: 113072]
>>>> [posix.c:3453:posix_writev] 0-engine-posix: write failed: offset 0,
>>>> [Invalid argument]
>>>> [2017-06-05 09:41:00.865760] E [MSGID: 113040]
>>>> [posix.c:3178:posix_readv] 0-engine-posix: read failed on
>>>> gfid=8c94f658-ac3c-4e3a-b368-8c038513a914, fd=0x7f408584c06c,
>>>> offset=127488 size=512, buf=0x7f4083c0b000 [Invalid argument]
>>>>
>>>> But then, both the write and the read have 512byte-aligned offset, size
>>>> and buf address (which is correct).
>>>>
>>>> Are you saying you don't see this issue with 4K block-size?
>>>>
>>>> -Krutika
>>>>
>>>> On Mon, Jun 5, 2017 at 3:21 PM, Abi Askushi <rightkicktech at gmail.com>
>>>> wrote:
>>>>
>>>>> Hi Sahina,
>>>>>
>>>>> Attached are the logs. Let me know if sth else is needed.
>>>>>
>>>>> I have 5 disks (with 4K physical sector) in RAID5. The RAID has 64K
>>>>> stripe size at the moment.
>>>>> I have prepared the storage as below:
>>>>>
>>>>> pvcreate --dataalignment 256K /dev/sda4
>>>>> vgcreate --physicalextentsize 256K gluster /dev/sda4
>>>>>
>>>>> lvcreate -n engine --size 120G gluster
>>>>> mkfs.xfs -f -i size=512 /dev/gluster/engine
>>>>>
>>>>> Thanx,
>>>>> Alex
>>>>>
>>>>> On Mon, Jun 5, 2017 at 12:14 PM, Sahina Bose <sabose at redhat.com>
>>>>> wrote:
>>>>>
>>>>>> Can we have the gluster mount logs and brick logs to check if it's
>>>>>> the same issue?
>>>>>>
>>>>>> On Sun, Jun 4, 2017 at 11:21 PM, Abi Askushi <rightkicktech at gmail.com
>>>>>> > wrote:
>>>>>>
>>>>>>> I clean installed everything and ran into the same.
>>>>>>> I then ran gdeploy and encountered the same issue when deploying
>>>>>>> engine.
>>>>>>> Seems that gluster (?) doesn't like 4K sector drives. I am not sure
>>>>>>> if it has to do with alignment. The weird thing is that gluster volumes are
>>>>>>> all ok, replicating normally and no split brain is reported.
>>>>>>>
>>>>>>> The solution to the mentioned bug (1386443
>>>>>>> <https://bugzilla.redhat.com/show_bug.cgi?id=1386443>) was to
>>>>>>> format with 512 sector size, which for my case is not an option:
>>>>>>>
>>>>>>> mkfs.xfs -f -i size=512 -s size=512 /dev/gluster/engine
>>>>>>> illegal sector size 512; hw sector is 4096
>>>>>>>
>>>>>>> Is there any workaround to address this?
>>>>>>>
>>>>>>> Thanx,
>>>>>>> Alex
>>>>>>>
>>>>>>>
>>>>>>> On Sun, Jun 4, 2017 at 5:48 PM, Abi Askushi <rightkicktech at gmail.com
>>>>>>> > wrote:
>>>>>>>
>>>>>>>> Hi Maor,
>>>>>>>>
>>>>>>>> My disk are of 4K block size and from this bug seems that gluster
>>>>>>>> replica needs 512B block size.
>>>>>>>> Is there a way to make gluster function with 4K drives?
>>>>>>>>
>>>>>>>> Thank you!
>>>>>>>>
>>>>>>>> On Sun, Jun 4, 2017 at 2:34 PM, Maor Lipchuk <mlipchuk at redhat.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> Hi Alex,
>>>>>>>>>
>>>>>>>>> I saw a bug that might be related to the issue you encountered at
>>>>>>>>> https://bugzilla.redhat.com/show_bug.cgi?id=1386443
>>>>>>>>>
>>>>>>>>> Sahina, maybe you have any advise? Do you think that BZ1386443is
>>>>>>>>> related?
>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>> Maor
>>>>>>>>>
>>>>>>>>> On Sat, Jun 3, 2017 at 8:45 PM, Abi Askushi <
>>>>>>>>> rightkicktech at gmail.com> wrote:
>>>>>>>>> > Hi All,
>>>>>>>>> >
>>>>>>>>> > I have installed successfully several times oVirt (version 4.1)
>>>>>>>>> with 3 nodes
>>>>>>>>> > on top glusterfs.
>>>>>>>>> >
>>>>>>>>> > This time, when trying to configure the same setup, I am facing
>>>>>>>>> the
>>>>>>>>> > following issue which doesn't seem to go away. During
>>>>>>>>> installation i get the
>>>>>>>>> > error:
>>>>>>>>> >
>>>>>>>>> > Failed to execute stage 'Misc configuration': Cannot acquire
>>>>>>>>> host id:
>>>>>>>>> > (u'a5a6b0e7-fc3f-4838-8e26-c8b4d5e5e922', SanlockException(22,
>>>>>>>>> 'Sanlock
>>>>>>>>> > lockspace add failure', 'Invalid argument'))
>>>>>>>>> >
>>>>>>>>> > The only different in this setup is that instead of standard
>>>>>>>>> partitioning i
>>>>>>>>> > have GPT partitioning and the disks have 4K block size instead
>>>>>>>>> of 512.
>>>>>>>>> >
>>>>>>>>> > The /var/log/sanlock.log has the following lines:
>>>>>>>>> >
>>>>>>>>> > 2017-06-03 19:21:15+0200 23450 [943]: s9 lockspace
>>>>>>>>> > ba6bd862-c2b8-46e7-b2c8-91e4a5bb2047:250:/rhev/data-center/m
>>>>>>>>> nt/_var_lib_ovirt-hosted-engin-setup_tmptjkIDI/ba6bd862-c2b8
>>>>>>>>> -46e7-b2c8-91e4a5bb2047/dom_md/ids:0
>>>>>>>>> > 2017-06-03 19:21:36+0200 23471 [944]: s9:r5 resource
>>>>>>>>> > ba6bd862-c2b8-46e7-b2c8-91e4a5bb2047:SDM:/rhev/data-center/m
>>>>>>>>> nt/_var_lib_ovirt-hosted-engine-setup_tmptjkIDI/ba6bd862-c2b
>>>>>>>>> 8-46e7-b2c8-91e4a5bb2047/dom_md/leases:1048576
>>>>>>>>> > for 2,9,23040
>>>>>>>>> > 2017-06-03 19:21:36+0200 23471 [943]: s10 lockspace
>>>>>>>>> > a5a6b0e7-fc3f-4838-8e26-c8b4d5e5e922:250:/rhev/data-center/m
>>>>>>>>> nt/glusterSD/10.100.100.1:_engine/a5a6b0e7-fc3f-4838-8e26-c8
>>>>>>>>> b4d5e5e922/dom_md/ids:0
>>>>>>>>> > 2017-06-03 19:21:36+0200 23471 [23522]: a5a6b0e7 aio collect RD
>>>>>>>>> > 0x7f59b00008c0:0x7f59b00008d0:0x7f59b0101000 result -22:0 match
>>>>>>>>> res
>>>>>>>>> > 2017-06-03 19:21:36+0200 23471 [23522]: read_sectors
>>>>>>>>> delta_leader offset
>>>>>>>>> > 127488 rv -22
>>>>>>>>> > /rhev/data-center/mnt/glusterSD/10.100.100.1:_engine/a5a6b0e
>>>>>>>>> 7-fc3f-4838-8e26-c8b4d5e5e922/dom_md/ids
>>>>>>>>> > 2017-06-03 19:21:37+0200 23472 [930]: s9 host 250 1 23450
>>>>>>>>> > 88c2244c-a782-40ed-9560-6cfa4d46f853.v0.neptune
>>>>>>>>> > 2017-06-03 19:21:37+0200 23472 [943]: s10 add_lockspace fail
>>>>>>>>> result -22
>>>>>>>>> >
>>>>>>>>> > And /var/log/vdsm/vdsm.log says:
>>>>>>>>> >
>>>>>>>>> > 2017-06-03 19:19:38,176+0200 WARN (jsonrpc/3)
>>>>>>>>> > [storage.StorageServer.MountConnection] Using user specified
>>>>>>>>> > backup-volfile-servers option (storageServer:253)
>>>>>>>>> > 2017-06-03 19:21:12,379+0200 WARN (periodic/1) [throttled] MOM
>>>>>>>>> not
>>>>>>>>> > available. (throttledlog:105)
>>>>>>>>> > 2017-06-03 19:21:12,380+0200 WARN (periodic/1) [throttled] MOM
>>>>>>>>> not
>>>>>>>>> > available, KSM stats will be missing. (throttledlog:105)
>>>>>>>>> > 2017-06-03 19:21:14,714+0200 WARN (jsonrpc/1)
>>>>>>>>> > [storage.StorageServer.MountConnection] Using user specified
>>>>>>>>> > backup-volfile-servers option (storageServer:253)
>>>>>>>>> > 2017-06-03 19:21:15,515+0200 ERROR (jsonrpc/4)
>>>>>>>>> [storage.initSANLock] Cannot
>>>>>>>>> > initialize SANLock for domain a5a6b0e7-fc3f-4838-8e26-c8b4d5
>>>>>>>>> e5e922
>>>>>>>>> > (clusterlock:238)
>>>>>>>>> > Traceback (most recent call last):
>>>>>>>>> > File "/usr/lib/python2.7/site-packa
>>>>>>>>> ges/vdsm/storage/clusterlock.py", line
>>>>>>>>> > 234, in initSANLock
>>>>>>>>> > sanlock.init_lockspace(sdUUID, idsPath)
>>>>>>>>> > SanlockException: (107, 'Sanlock lockspace init failure',
>>>>>>>>> 'Transport
>>>>>>>>> > endpoint is not connected')
>>>>>>>>> > 2017-06-03 19:21:15,515+0200 WARN (jsonrpc/4)
>>>>>>>>> > [storage.StorageDomainManifest] lease did not initialize
>>>>>>>>> successfully
>>>>>>>>> > (sd:557)
>>>>>>>>> > Traceback (most recent call last):
>>>>>>>>> > File "/usr/share/vdsm/storage/sd.py", line 552, in
>>>>>>>>> initDomainLock
>>>>>>>>> > self._domainLock.initLock(self.getDomainLease())
>>>>>>>>> > File "/usr/lib/python2.7/site-packa
>>>>>>>>> ges/vdsm/storage/clusterlock.py", line
>>>>>>>>> > 271, in initLock
>>>>>>>>> > initSANLock(self._sdUUID, self._idsPath, lease)
>>>>>>>>> > File "/usr/lib/python2.7/site-packa
>>>>>>>>> ges/vdsm/storage/clusterlock.py", line
>>>>>>>>> > 239, in initSANLock
>>>>>>>>> > raise se.ClusterLockInitError()
>>>>>>>>> > ClusterLockInitError: Could not initialize cluster lock: ()
>>>>>>>>> > 2017-06-03 19:21:37,867+0200 ERROR (jsonrpc/2)
>>>>>>>>> [storage.StoragePool] Create
>>>>>>>>> > pool hosted_datacenter canceled (sp:655)
>>>>>>>>> > Traceback (most recent call last):
>>>>>>>>> > File "/usr/share/vdsm/storage/sp.py", line 652, in create
>>>>>>>>> > self.attachSD(sdUUID)
>>>>>>>>> > File "/usr/lib/python2.7/site-packa
>>>>>>>>> ges/vdsm/storage/securable.py", line
>>>>>>>>> > 79, in wrapper
>>>>>>>>> > return method(self, *args, **kwargs)
>>>>>>>>> > File "/usr/share/vdsm/storage/sp.py", line 971, in attachSD
>>>>>>>>> > dom.acquireHostId(self.id)
>>>>>>>>> > File "/usr/share/vdsm/storage/sd.py", line 790, in
>>>>>>>>> acquireHostId
>>>>>>>>> > self._manifest.acquireHostId(hostId, async)
>>>>>>>>> > File "/usr/share/vdsm/storage/sd.py", line 449, in
>>>>>>>>> acquireHostId
>>>>>>>>> > self._domainLock.acquireHostId(hostId, async)
>>>>>>>>> > File "/usr/lib/python2.7/site-packa
>>>>>>>>> ges/vdsm/storage/clusterlock.py", line
>>>>>>>>> > 297, in acquireHostId
>>>>>>>>> > raise se.AcquireHostIdFailure(self._sdUUID, e)
>>>>>>>>> > AcquireHostIdFailure: Cannot acquire host id:
>>>>>>>>> > (u'a5a6b0e7-fc3f-4838-8e26-c8b4d5e5e922', SanlockException(22,
>>>>>>>>> 'Sanlock
>>>>>>>>> > lockspace add failure', 'Invalid argument'))
>>>>>>>>> > 2017-06-03 19:21:37,870+0200 ERROR (jsonrpc/2)
>>>>>>>>> [storage.StoragePool] Domain
>>>>>>>>> > ba6bd862-c2b8-46e7-b2c8-91e4a5bb2047 detach from MSD
>>>>>>>>> > ba6bd862-c2b8-46e7-b2c8-91e4a5bb2047 Ver 1 failed. (sp:528)
>>>>>>>>> > Traceback (most recent call last):
>>>>>>>>> > File "/usr/share/vdsm/storage/sp.py", line 525, in
>>>>>>>>> __cleanupDomains
>>>>>>>>> > self.detachSD(sdUUID)
>>>>>>>>> > File "/usr/lib/python2.7/site-packa
>>>>>>>>> ges/vdsm/storage/securable.py", line
>>>>>>>>> > 79, in wrapper
>>>>>>>>> > return method(self, *args, **kwargs)
>>>>>>>>> > File "/usr/share/vdsm/storage/sp.py", line 1046, in detachSD
>>>>>>>>> > raise se.CannotDetachMasterStorageDomain(sdUUID)
>>>>>>>>> > CannotDetachMasterStorageDomain: Illegal action:
>>>>>>>>> > (u'ba6bd862-c2b8-46e7-b2c8-91e4a5bb2047',)
>>>>>>>>> > 2017-06-03 19:21:37,872+0200 ERROR (jsonrpc/2)
>>>>>>>>> [storage.StoragePool] Domain
>>>>>>>>> > a5a6b0e7-fc3f-4838-8e26-c8b4d5e5e922 detach from MSD
>>>>>>>>> > ba6bd862-c2b8-46e7-b2c8-91e4a5bb2047 Ver 1 failed. (sp:528)
>>>>>>>>> > Traceback (most recent call last):
>>>>>>>>> > File "/usr/share/vdsm/storage/sp.py", line 525, in
>>>>>>>>> __cleanupDomains
>>>>>>>>> > self.detachSD(sdUUID)
>>>>>>>>> > File "/usr/lib/python2.7/site-packa
>>>>>>>>> ges/vdsm/storage/securable.py", line
>>>>>>>>> > 79, in wrapper
>>>>>>>>> > return method(self, *args, **kwargs)
>>>>>>>>> > File "/usr/share/vdsm/storage/sp.py", line 1043, in detachSD
>>>>>>>>> > self.validateAttachedDomain(dom)
>>>>>>>>> > File "/usr/lib/python2.7/site-packa
>>>>>>>>> ges/vdsm/storage/securable.py", line
>>>>>>>>> > 79, in wrapper
>>>>>>>>> > return method(self, *args, **kwargs)
>>>>>>>>> > File "/usr/share/vdsm/storage/sp.py", line 542, in
>>>>>>>>> validateAttachedDomain
>>>>>>>>> > self.validatePoolSD(dom.sdUUID)
>>>>>>>>> > File "/usr/lib/python2.7/site-packa
>>>>>>>>> ges/vdsm/storage/securable.py", line
>>>>>>>>> > 79, in wrapper
>>>>>>>>> > return method(self, *args, **kwargs)
>>>>>>>>> > File "/usr/share/vdsm/storage/sp.py", line 535, in
>>>>>>>>> validatePoolSD
>>>>>>>>> > raise se.StorageDomainNotMemberOfPool(self.spUUID, sdUUID)
>>>>>>>>> > StorageDomainNotMemberOfPool: Domain is not member in pool:
>>>>>>>>> > u'pool=a1e7e9dd-0cf4-41ae-ba13-36297ed66309,
>>>>>>>>> > domain=a5a6b0e7-fc3f-4838-8e26-c8b4d5e5e922'
>>>>>>>>> > 2017-06-03 19:21:40,063+0200 ERROR (jsonrpc/2)
>>>>>>>>> [storage.TaskManager.Task]
>>>>>>>>> > (Task='a2476a33-26f8-4ebd-876d-02fe5d13ef78') Unexpected error
>>>>>>>>> (task:870)
>>>>>>>>> > Traceback (most recent call last):
>>>>>>>>> > File "/usr/share/vdsm/storage/task.py", line 877, in _run
>>>>>>>>> > return fn(*args, **kargs)
>>>>>>>>> > File "/usr/lib/python2.7/site-packages/vdsm/logUtils.py",
>>>>>>>>> line 52, in
>>>>>>>>> > wrapper
>>>>>>>>> > res = f(*args, **kwargs)
>>>>>>>>> > File "/usr/share/vdsm/storage/hsm.py", line 959, in
>>>>>>>>> createStoragePool
>>>>>>>>> > leaseParams)
>>>>>>>>> > File "/usr/share/vdsm/storage/sp.py", line 652, in create
>>>>>>>>> > self.attachSD(sdUUID)
>>>>>>>>> > File "/usr/lib/python2.7/site-packa
>>>>>>>>> ges/vdsm/storage/securable.py", line
>>>>>>>>> > 79, in wrapper
>>>>>>>>> > return method(self, *args, **kwargs)
>>>>>>>>> > File "/usr/share/vdsm/storage/sp.py", line 971, in attachSD
>>>>>>>>> > dom.acquireHostId(self.id)
>>>>>>>>> > File "/usr/share/vdsm/storage/sd.py", line 790, in
>>>>>>>>> acquireHostId
>>>>>>>>> > self._manifest.acquireHostId(hostId, async)
>>>>>>>>> > File "/usr/share/vdsm/storage/sd.py", line 449, in
>>>>>>>>> acquireHostId
>>>>>>>>> > self._domainLock.acquireHostId(hostId, async)
>>>>>>>>> > File "/usr/lib/python2.7/site-packa
>>>>>>>>> ges/vdsm/storage/clusterlock.py", line
>>>>>>>>> > 297, in acquireHostId
>>>>>>>>> > raise se.AcquireHostIdFailure(self._sdUUID, e)
>>>>>>>>> > AcquireHostIdFailure: Cannot acquire host id:
>>>>>>>>> > (u'a5a6b0e7-fc3f-4838-8e26-c8b4d5e5e922', SanlockException(22,
>>>>>>>>> 'Sanlock
>>>>>>>>> > lockspace add failure', 'Invalid argument'))
>>>>>>>>> > 2017-06-03 19:21:40,067+0200 ERROR (jsonrpc/2)
>>>>>>>>> [storage.Dispatcher]
>>>>>>>>> > {'status': {'message': "Cannot acquire host id:
>>>>>>>>> > (u'a5a6b0e7-fc3f-4838-8e26-c8b4d5e5e922', SanlockException(22,
>>>>>>>>> 'Sanlock
>>>>>>>>> > lockspace add failure', 'Invalid argument'))", 'code': 661}}
>>>>>>>>> (dispatcher:77)
>>>>>>>>> >
>>>>>>>>> > The gluster volume prepared for engine storage is online and no
>>>>>>>>> split brain
>>>>>>>>> > is reported. I don't understand what needs to be done to
>>>>>>>>> overcome this. Any
>>>>>>>>> > idea will be appreciated.
>>>>>>>>> >
>>>>>>>>> > Thank you,
>>>>>>>>> > Alex
>>>>>>>>> >
>>>>>>>>> > _______________________________________________
>>>>>>>>> > Users mailing list
>>>>>>>>> > Users at ovirt.org
>>>>>>>>> > http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>> >
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Users mailing list
>>>>>>> Users at ovirt.org
>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at ovirt.org
>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>
>>>>>
>>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170606/80a52778/attachment-0001.html>
More information about the Users
mailing list