[ovirt-users] hosted engine unattended install fails

Wed Jun 7 07:20:32 UTC 2017

On 06/07/2017 12:43 PM, Ramachandra Reddy Ankireddypalle wrote:
> HI,
>     Thanks for looking in to the issue. It turns out that the error 
> happens if I use bonded interface. If I use regular eth interface 
> everything works fine. Please suggest what needs to be done for 
> bonding to work.
>
> Thanks and Regards,
> Ram
Hi Ram,

     I saw your another email where you said that with bonded interface 
hosted-engine installation does not succeed. But thought this is a 
different issue what you are facing by just using a regular eth interface.

     Sorry, it is my bad.

Thanks
kasturi
>
> On Wed, Jun 7, 2017 at 3:09 AM, knarra <knarra at redhat.com 
> <mailto:knarra at redhat.com>> wrote:
>
>     On 06/07/2017 12:06 AM, Ramachandra Reddy Ankireddypalle wrote:
>>     Hi,
>>            hosted engine unattended install fails with the following
>>     error:
>>
>>     [ ERROR ] Cannot automatically add the host to cluster Default: 
>>     <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head>
>>     <title>400 Bad Request</title> </head><body> <h1>Bad Request</h1>
>>     <p>Your browser sent a request that this server could not
>>     understand.<br /> </p> </body></html>
>>
>>
>>               Please check Engine VM configuration.
>>
>>               Make a selection from the options below:
>>               (1) Continue setup - Engine VM configuration has been fixed
>>               (2) Abort setup
>>
>>
>>     Thanks and Regards,
>>     Ram
>>
>>
>>     _______________________________________________
>>     Users mailing list
>>     Users at ovirt.org <mailto:Users at ovirt.org>
>>     http://lists.ovirt.org/mailman/listinfo/users
>>     <http://lists.ovirt.org/mailman/listinfo/users>
>
>     Hi,
>
>         Can you please check if your cluster has both virt + gluster
>     services enabled from the engine vm? You can run the command
>     'engine-config -g AllowClusterWithVirtGlusterEnabled' to see if
>     this is enabled. If not, can you run the command
>     command=engine-config -s AllowClusterWithVirtGlusterEnabled=true
>     and press continue setup and this should work.
>
>         But these issues are fixed in the latest version. Can you
>     please let me know which version are you using ?
>
>     Thanks
>
>     kasturi
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170607/5f05eda5/attachment-0001.html>