[ovirt-users] Hosted Engine Setup with the gluster bricks on the same disk as the OS

[Mike DePaulo]

On Thu, May 18, 2017 at 10:03 AM, Sachidananda URS <surs at redhat.com> wrote:

> Hi,
>
> On Thu, May 18, 2017 at 7:08 PM, Sahina Bose <sabose at redhat.com> wrote:
>
>>
>>
>> On Thu, May 18, 2017 at 3:20 PM, Mike DePaulo <mikedep333 at gmail.com>
>> wrote:
>>
>>> Well, I tried both of the following:
>>> 1. Having only a boot partition and a PV for the OS that does not take
>>> up the entire disk, and then specifying "sda" in Hosted Engine Setup.
>>> 2. Having not only a boot partition and a PV for the OS, but also an
>>> empty (and not formatted) /dev/sda3 PV that I created with fdisk.
>>> Then, specfying "sda3" in Hosted Engine Setup.
>>>
>>> Both attempts resulted in errors like this:
>>> failed: [centerpoint.ad.depaulo.org] (item=/dev/sda3) => {"failed":
>>> true, "failed_when_result": true, "item": "/dev/sda3", "msg": "
>>> Device /dev/sda3 not found (or ignored by filtering).\n", "rc": 5}
>>>
>>
>> Can you provide gdeploy logs? I think, it's at ~/.gdeploy/gdeploy.log
>>
>>
>>>
>>> It seems like having gluster bricks on the same disk as the OS doesn't
>>> work at all.
>>>
>>>
>
> Hi, /dev/sda3 should work, the error here is possibly due to filesystem
> signature.
>
> Can you please set wipefs=yes? For example
>
> [pv]
> action=create
> wipefs=yes
> devices=/dev/sda3
>
> -sac
>
>
Sorry for the long delay.

This worked. Thank you very much.

-Mike
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170618/0ed1563d/attachment.html>