[ovirt-users] HostedEngine VM not visible, but running
Martin Sivak
msivak at redhat.com
Wed Jun 28 08:25:34 UTC 2017
Hi,
can you please check the contents of
/etc/ovirt-hosted-engine/hosted-engine.conf or
/etc/ovirt-hosted-engine-ha/agent.conf (I am not sure which one it is
right now) and search for host-id?
Make sure the IDs are different. If they are not, then there is a bug somewhere.
Martin
On Tue, Jun 27, 2017 at 6:26 PM, cmc <iucounu at gmail.com> wrote:
> I see this on the host it is trying to migrate in /var/log/sanlock:
>
> 2017-06-27 17:10:40+0100 527703 [2407]: s3528 lockspace
> 207221b2-959b-426b-b945-18e1adfed62f:1:/dev/207221b2-959b-426b-b945-18e1adfed62f/ids:0
> 2017-06-27 17:13:00+0100 527843 [27446]: s3528 delta_acquire host_id 1
> busy1 1 2 1042692 3d4ec963-8486-43a2-a7d9-afa82508f89f.kvm-ldn-03
> 2017-06-27 17:13:01+0100 527844 [2407]: s3528 add_lockspace fail result -262
>
> The sanlock service is running. Why would this occur?
>
> Thanks,
>
> C
>
> On Tue, Jun 27, 2017 at 5:21 PM, cmc <iucounu at gmail.com> wrote:
>> Hi Martin,
>>
>> Thanks for the reply. I have done this, and the deployment completed
>> without error. However, it still will not allow the Hosted Engine
>> migrate to another host. The
>> /etc/ovirt-hosted-engine/hosted-engine.conf got created ok on the host
>> I re-installed, but the ovirt-ha-broker.service, though it starts,
>> reports:
>>
>> --------------------8<-------------------
>>
>> Jun 27 14:58:26 kvm-ldn-01 systemd[1]: Starting oVirt Hosted Engine
>> High Availability Communications Broker...
>> Jun 27 14:58:27 kvm-ldn-01 ovirt-ha-broker[6101]: ovirt-ha-broker
>> ovirt_hosted_engine_ha.broker.storage_broker.StorageBroker ERROR
>> Failed to read metadata from
>> /rhev/data-center/mnt/blockSD/207221b2-959b-426b-b945-18e1adfed62f/ha_agent/hosted-engine.metadata
>> Traceback (most
>> recent call last):
>> File
>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/broker/storage_broker.py",
>> line 129, in get_raw_stats_for_service_type
>> f =
>> os.open(path, direct_flag | os.O_RDONLY | os.O_SYNC)
>> OSError: [Errno 2]
>> No such file or directory:
>> '/rhev/data-center/mnt/blockSD/207221b2-959b-426b-b945-18e1adfed62f/ha_agent/hosted-engine.metadata'
>>
>> --------------------8<-------------------
>>
>> I checked the path, and it exists. I can run 'less -f' on it fine. The
>> perms are slightly different on the host that is running the VM vs the
>> one that is reporting errors (600 vs 660), ownership is vdsm:qemu. Is
>> this a san locking issue?
>>
>> Thanks for any help,
>>
>> Cam
>>
>> On Tue, Jun 27, 2017 at 1:41 PM, Martin Sivak <msivak at redhat.com> wrote:
>>>> Should it be? It was not in the instructions for the migration from
>>>> bare-metal to Hosted VM
>>>
>>> The hosted engine will only migrate to hosts that have the services
>>> running. Please put one other host to maintenance and select Hosted
>>> engine action: DEPLOY in the reinstall dialog.
>>>
>>> Best regards
>>>
>>> Martin Sivak
>>>
>>> On Tue, Jun 27, 2017 at 1:23 PM, cmc <iucounu at gmail.com> wrote:
>>>> I changed the 'os.other.devices.display.protocols.value.3.6 =
>>>> spice/qxl,vnc/cirrus,vnc/qxl' line to have the same display protocols
>>>> as 4 and the hosted engine now appears in the list of VMs. I am
>>>> guessing the compatibility version was causing it to use the 3.6
>>>> version. However, I am still unable to migrate the engine VM to
>>>> another host. When I try putting the host it is currently on into
>>>> maintenance, it reports:
>>>>
>>>> Error while executing action: Cannot switch the Host(s) to Maintenance mode.
>>>> There are no available hosts capable of running the engine VM.
>>>>
>>>> Running 'hosted-engine --vm-status' still shows 'Engine status:
>>>> unknown stale-data'.
>>>>
>>>> The ovirt-ha-broker service is only running on one host. It was set to
>>>> 'disabled' in systemd. It won't start as there is no
>>>> /etc/ovirt-hosted-engine/hosted-engine.conf on the other two hosts.
>>>> Should it be? It was not in the instructions for the migration from
>>>> bare-metal to Hosted VM
>>>>
>>>> Thanks,
>>>>
>>>> Cam
>>>>
>>>> On Thu, Jun 22, 2017 at 1:07 PM, cmc <iucounu at gmail.com> wrote:
>>>>> Hi Tomas,
>>>>>
>>>>> So in my /usr/share/ovirt-engine/conf/osinfo-defaults.properties on my
>>>>> engine VM, I have:
>>>>>
>>>>> os.other.devices.display.protocols.value = spice/qxl,vnc/vga,vnc/qxl,vnc/cirrus
>>>>> os.other.devices.display.protocols.value.3.6 = spice/qxl,vnc/cirrus,vnc/qxl
>>>>>
>>>>> That seems to match - I assume since this is 4.1, the 3.6 should not apply
>>>>>
>>>>> Is there somewhere else I should be looking?
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Cam
>>>>>
>>>>> On Thu, Jun 22, 2017 at 11:40 AM, Tomas Jelinek <tjelinek at redhat.com> wrote:
>>>>>>
>>>>>>
>>>>>> On Thu, Jun 22, 2017 at 12:38 PM, Michal Skrivanek
>>>>>> <michal.skrivanek at redhat.com> wrote:
>>>>>>>
>>>>>>>
>>>>>>> > On 22 Jun 2017, at 12:31, Martin Sivak <msivak at redhat.com> wrote:
>>>>>>> >
>>>>>>> > Tomas, what fields are needed in a VM to pass the check that causes
>>>>>>> > the following error?
>>>>>>> >
>>>>>>> >>>>> WARN [org.ovirt.engine.core.bll.exportimport.ImportVmCommand]
>>>>>>> >>>>> (org.ovirt.thread.pool-6-thread-23) [] Validation of action
>>>>>>> >>>>> 'ImportVm'
>>>>>>> >>>>> failed for user SYSTEM. Reasons: VAR__ACTION__IMPORT
>>>>>>> >>>>>
>>>>>>> >>>>> ,VAR__TYPE__VM,ACTION_TYPE_FAILED_ILLEGAL_VM_DISPLAY_TYPE_IS_NOT_SUPPORTED_BY_OS
>>>>>>>
>>>>>>> to match the OS and VM Display type;-)
>>>>>>> Configuration is in osinfo….e.g. if that is import from older releases on
>>>>>>> Linux this is typically caused by the cahgen of cirrus to vga for non-SPICE
>>>>>>> VMs
>>>>>>
>>>>>>
>>>>>> yep, the default supported combinations for 4.0+ is this:
>>>>>> os.other.devices.display.protocols.value =
>>>>>> spice/qxl,vnc/vga,vnc/qxl,vnc/cirrus
>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> >
>>>>>>> > Thanks.
>>>>>>> >
>>>>>>> > On Thu, Jun 22, 2017 at 12:19 PM, cmc <iucounu at gmail.com> wrote:
>>>>>>> >> Hi Martin,
>>>>>>> >>
>>>>>>> >>>
>>>>>>> >>> just as a random comment, do you still have the database backup from
>>>>>>> >>> the bare metal -> VM attempt? It might be possible to just try again
>>>>>>> >>> using it. Or in the worst case.. update the offending value there
>>>>>>> >>> before restoring it to the new engine instance.
>>>>>>> >>
>>>>>>> >> I still have the backup. I'd rather do the latter, as re-running the
>>>>>>> >> HE deployment is quite lengthy and involved (I have to re-initialise
>>>>>>> >> the FC storage each time). Do you know what the offending value(s)
>>>>>>> >> would be? Would it be in the Postgres DB or in a config file
>>>>>>> >> somewhere?
>>>>>>> >>
>>>>>>> >> Cheers,
>>>>>>> >>
>>>>>>> >> Cam
>>>>>>> >>
>>>>>>> >>> Regards
>>>>>>> >>>
>>>>>>> >>> Martin Sivak
>>>>>>> >>>
>>>>>>> >>> On Thu, Jun 22, 2017 at 11:39 AM, cmc <iucounu at gmail.com> wrote:
>>>>>>> >>>> Hi Yanir,
>>>>>>> >>>>
>>>>>>> >>>> Thanks for the reply.
>>>>>>> >>>>
>>>>>>> >>>>> First of all, maybe a chain reaction of :
>>>>>>> >>>>> WARN [org.ovirt.engine.core.bll.exportimport.ImportVmCommand]
>>>>>>> >>>>> (org.ovirt.thread.pool-6-thread-23) [] Validation of action
>>>>>>> >>>>> 'ImportVm'
>>>>>>> >>>>> failed for user SYSTEM. Reasons: VAR__ACTION__IMPORT
>>>>>>> >>>>>
>>>>>>> >>>>> ,VAR__TYPE__VM,ACTION_TYPE_FAILED_ILLEGAL_VM_DISPLAY_TYPE_IS_NOT_SUPPORTED_BY_OS
>>>>>>> >>>>> is causing the hosted engine vm not to be set up correctly and
>>>>>>> >>>>> further
>>>>>>> >>>>> actions were made when the hosted engine vm wasnt in a stable state.
>>>>>>> >>>>>
>>>>>>> >>>>> As for now, are you trying to revert back to a previous/initial
>>>>>>> >>>>> state ?
>>>>>>> >>>>
>>>>>>> >>>> I'm not trying to revert it to a previous state for now. This was a
>>>>>>> >>>> migration from a bare metal engine, and it didn't report any error
>>>>>>> >>>> during the migration. I'd had some problems on my first attempts at
>>>>>>> >>>> this migration, whereby it never completed (due to a proxy issue) but
>>>>>>> >>>> I managed to resolve this. Do you know of a way to get the Hosted
>>>>>>> >>>> Engine VM into a stable state, without rebuilding the entire cluster
>>>>>>> >>>> from scratch (since I have a lot of VMs on it)?
>>>>>>> >>>>
>>>>>>> >>>> Thanks for any help.
>>>>>>> >>>>
>>>>>>> >>>> Regards,
>>>>>>> >>>>
>>>>>>> >>>> Cam
>>>>>>> >>>>
>>>>>>> >>>>> Regards,
>>>>>>> >>>>> Yanir
>>>>>>> >>>>>
>>>>>>> >>>>> On Wed, Jun 21, 2017 at 4:32 PM, cmc <iucounu at gmail.com> wrote:
>>>>>>> >>>>>>
>>>>>>> >>>>>> Hi Jenny/Martin,
>>>>>>> >>>>>>
>>>>>>> >>>>>> Any idea what I can do here? The hosted engine VM has no log on any
>>>>>>> >>>>>> host in /var/log/libvirt/qemu, and I fear that if I need to put the
>>>>>>> >>>>>> host into maintenance, e.g., to upgrade it that I created it on
>>>>>>> >>>>>> (which
>>>>>>> >>>>>> I think is hosting it), or if it fails for any reason, it won't get
>>>>>>> >>>>>> migrated to another host, and I will not be able to manage the
>>>>>>> >>>>>> cluster. It seems to be a very dangerous position to be in.
>>>>>>> >>>>>>
>>>>>>> >>>>>> Thanks,
>>>>>>> >>>>>>
>>>>>>> >>>>>> Cam
>>>>>>> >>>>>>
>>>>>>> >>>>>> On Wed, Jun 21, 2017 at 11:48 AM, cmc <iucounu at gmail.com> wrote:
>>>>>>> >>>>>>> Thanks Martin. The hosts are all part of the same cluster.
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> I get these errors in the engine.log on the engine:
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> 2017-06-19 03:28:05,030Z WARN
>>>>>>> >>>>>>> [org.ovirt.engine.core.bll.exportimport.ImportVmCommand]
>>>>>>> >>>>>>> (org.ovirt.thread.pool-6-thread-23) [] Validation of action
>>>>>>> >>>>>>> 'ImportVm'
>>>>>>> >>>>>>> failed for user SYST
>>>>>>> >>>>>>> EM. Reasons:
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> VAR__ACTION__IMPORT,VAR__TYPE__VM,ACTION_TYPE_FAILED_ILLEGAL_VM_DISPLAY_TYPE_IS_NOT_SUPPORTED_BY_OS
>>>>>>> >>>>>>> 2017-06-19 03:28:05,030Z INFO
>>>>>>> >>>>>>> [org.ovirt.engine.core.bll.exportimport.ImportVmCommand]
>>>>>>> >>>>>>> (org.ovirt.thread.pool-6-thread-23) [] Lock freed to object
>>>>>>> >>>>>>> 'EngineLock:{exclusiveLocks='[a
>>>>>>> >>>>>>> 79e6b0e-fff4-4cba-a02c-4c00be151300=<VM,
>>>>>>> >>>>>>> ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName HostedEngine>,
>>>>>>> >>>>>>> HostedEngine=<VM_NAME, ACTION_TYPE_FAILED_NAME_ALREADY_USED>]',
>>>>>>> >>>>>>> sharedLocks=
>>>>>>> >>>>>>> '[a79e6b0e-fff4-4cba-a02c-4c00be151300=<REMOTE_VM,
>>>>>>> >>>>>>> ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName HostedEngine>]'}'
>>>>>>> >>>>>>> 2017-06-19 03:28:05,030Z ERROR
>>>>>>> >>>>>>> [org.ovirt.engine.core.bll.HostedEngineImporter]
>>>>>>> >>>>>>> (org.ovirt.thread.pool-6-thread-23) [] Failed importing the Hosted
>>>>>>> >>>>>>> Engine VM
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> The sanlock.log reports conflicts on that same host, and a
>>>>>>> >>>>>>> different
>>>>>>> >>>>>>> error on the other hosts, not sure if they are related.
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> And this in the /var/log/ovirt-hosted-engine-ha/agent log on the
>>>>>>> >>>>>>> host
>>>>>>> >>>>>>> which I deployed the hosted engine VM on:
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> MainThread::ERROR::2017-06-19
>>>>>>> >>>>>>>
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> 13:09:49,743::ovf_store::124::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(getEngineVMOVF)
>>>>>>> >>>>>>> Unable to extract HEVM OVF
>>>>>>> >>>>>>> MainThread::ERROR::2017-06-19
>>>>>>> >>>>>>>
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> 13:09:49,743::config::445::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(_get_vm_conf_content_from_ovf_store)
>>>>>>> >>>>>>> Failed extracting VM OVF from the OVF_STORE volume, falling back
>>>>>>> >>>>>>> to
>>>>>>> >>>>>>> initial vm.conf
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> I've seen some of these issues reported in bugzilla, but they were
>>>>>>> >>>>>>> for
>>>>>>> >>>>>>> older versions of oVirt (and appear to be resolved).
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> I will install that package on the other two hosts, for which I
>>>>>>> >>>>>>> will
>>>>>>> >>>>>>> put them in maintenance as vdsm is installed as an upgrade. I
>>>>>>> >>>>>>> guess
>>>>>>> >>>>>>> restarting vdsm is a good idea after that?
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> Thanks,
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> Campbell
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> On Wed, Jun 21, 2017 at 10:51 AM, Martin Sivak <msivak at redhat.com>
>>>>>>> >>>>>>> wrote:
>>>>>>> >>>>>>>> Hi,
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>>> you do not have to install it on all hosts. But you should have
>>>>>>> >>>>>>>> more
>>>>>>> >>>>>>>> than one and ideally all hosted engine enabled nodes should
>>>>>>> >>>>>>>> belong to
>>>>>>> >>>>>>>> the same engine cluster.
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>>> Best regards
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>>> Martin Sivak
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>>> On Wed, Jun 21, 2017 at 11:29 AM, cmc <iucounu at gmail.com> wrote:
>>>>>>> >>>>>>>>> Hi Jenny,
>>>>>>> >>>>>>>>>
>>>>>>> >>>>>>>>> Does ovirt-hosted-engine-ha need to be installed across all
>>>>>>> >>>>>>>>> hosts?
>>>>>>> >>>>>>>>> Could that be the reason it is failing to see it properly?
>>>>>>> >>>>>>>>>
>>>>>>> >>>>>>>>> Thanks,
>>>>>>> >>>>>>>>>
>>>>>>> >>>>>>>>> Cam
>>>>>>> >>>>>>>>>
>>>>>>> >>>>>>>>> On Mon, Jun 19, 2017 at 1:27 PM, cmc <iucounu at gmail.com> wrote:
>>>>>>> >>>>>>>>>> Hi Jenny,
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> Logs are attached. I can see errors in there, but am unsure how
>>>>>>> >>>>>>>>>> they
>>>>>>> >>>>>>>>>> arose.
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> Thanks,
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> Campbell
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> On Mon, Jun 19, 2017 at 12:29 PM, Evgenia Tokar
>>>>>>> >>>>>>>>>> <etokar at redhat.com>
>>>>>>> >>>>>>>>>> wrote:
>>>>>>> >>>>>>>>>>> From the output it looks like the agent is down, try starting
>>>>>>> >>>>>>>>>>> it by
>>>>>>> >>>>>>>>>>> running:
>>>>>>> >>>>>>>>>>> systemctl start ovirt-ha-agent.
>>>>>>> >>>>>>>>>>>
>>>>>>> >>>>>>>>>>> The engine is supposed to see the hosted engine storage domain
>>>>>>> >>>>>>>>>>> and
>>>>>>> >>>>>>>>>>> import it
>>>>>>> >>>>>>>>>>> to the system, then it should import the hosted engine vm.
>>>>>>> >>>>>>>>>>>
>>>>>>> >>>>>>>>>>> Can you attach the agent log from the host
>>>>>>> >>>>>>>>>>> (/var/log/ovirt-hosted-engine-ha/agent.log)
>>>>>>> >>>>>>>>>>> and the engine log from the engine vm
>>>>>>> >>>>>>>>>>> (/var/log/ovirt-engine/engine.log)?
>>>>>>> >>>>>>>>>>>
>>>>>>> >>>>>>>>>>> Thanks,
>>>>>>> >>>>>>>>>>> Jenny
>>>>>>> >>>>>>>>>>>
>>>>>>> >>>>>>>>>>>
>>>>>>> >>>>>>>>>>> On Mon, Jun 19, 2017 at 12:41 PM, cmc <iucounu at gmail.com>
>>>>>>> >>>>>>>>>>> wrote:
>>>>>>> >>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>> Hi Jenny,
>>>>>>> >>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>>> What version are you running?
>>>>>>> >>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>> 4.1.2.2-1.el7.centos
>>>>>>> >>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>>> For the hosted engine vm to be imported and displayed in the
>>>>>>> >>>>>>>>>>>>> engine, you
>>>>>>> >>>>>>>>>>>>> must first create a master storage domain.
>>>>>>> >>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>> To provide a bit more detail: this was a migration of a
>>>>>>> >>>>>>>>>>>> bare-metal
>>>>>>> >>>>>>>>>>>> engine in an existing cluster to a hosted engine VM for that
>>>>>>> >>>>>>>>>>>> cluster.
>>>>>>> >>>>>>>>>>>> As part of this migration, I built an entirely new host and
>>>>>>> >>>>>>>>>>>> ran
>>>>>>> >>>>>>>>>>>> 'hosted-engine --deploy' (followed these instructions:
>>>>>>> >>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>> http://www.ovirt.org/documentation/self-hosted/chap-Migrating_from_Bare_Metal_to_an_EL-Based_Self-Hosted_Environment/).
>>>>>>> >>>>>>>>>>>> I restored the backup from the engine and it completed
>>>>>>> >>>>>>>>>>>> without any
>>>>>>> >>>>>>>>>>>> errors. I didn't see any instructions regarding a master
>>>>>>> >>>>>>>>>>>> storage
>>>>>>> >>>>>>>>>>>> domain in the page above. The cluster has two existing master
>>>>>>> >>>>>>>>>>>> storage
>>>>>>> >>>>>>>>>>>> domains, one is fibre channel, which is up, and one ISO
>>>>>>> >>>>>>>>>>>> domain,
>>>>>>> >>>>>>>>>>>> which
>>>>>>> >>>>>>>>>>>> is currently offline.
>>>>>>> >>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>>> What do you mean the hosted engine commands are failing?
>>>>>>> >>>>>>>>>>>>> What
>>>>>>> >>>>>>>>>>>>> happens
>>>>>>> >>>>>>>>>>>>> when
>>>>>>> >>>>>>>>>>>>> you run hosted-engine --vm-status now?
>>>>>>> >>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>> Interestingly, whereas when I ran it before, it exited with
>>>>>>> >>>>>>>>>>>> no
>>>>>>> >>>>>>>>>>>> output
>>>>>>> >>>>>>>>>>>> and a return code of '1', it now reports:
>>>>>>> >>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>> --== Host 1 status ==--
>>>>>>> >>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>> conf_on_shared_storage : True
>>>>>>> >>>>>>>>>>>> Status up-to-date : False
>>>>>>> >>>>>>>>>>>> Hostname :
>>>>>>> >>>>>>>>>>>> kvm-ldn-03.ldn.fscfc.co.uk
>>>>>>> >>>>>>>>>>>> Host ID : 1
>>>>>>> >>>>>>>>>>>> Engine status : unknown stale-data
>>>>>>> >>>>>>>>>>>> Score : 0
>>>>>>> >>>>>>>>>>>> stopped : True
>>>>>>> >>>>>>>>>>>> Local maintenance : False
>>>>>>> >>>>>>>>>>>> crc32 : 0217f07b
>>>>>>> >>>>>>>>>>>> local_conf_timestamp : 2911
>>>>>>> >>>>>>>>>>>> Host timestamp : 2897
>>>>>>> >>>>>>>>>>>> Extra metadata (valid at timestamp):
>>>>>>> >>>>>>>>>>>> metadata_parse_version=1
>>>>>>> >>>>>>>>>>>> metadata_feature_version=1
>>>>>>> >>>>>>>>>>>> timestamp=2897 (Thu Jun 15 16:22:54 2017)
>>>>>>> >>>>>>>>>>>> host-id=1
>>>>>>> >>>>>>>>>>>> score=0
>>>>>>> >>>>>>>>>>>> vm_conf_refresh_time=2911 (Thu Jun 15 16:23:08 2017)
>>>>>>> >>>>>>>>>>>> conf_on_shared_storage=True
>>>>>>> >>>>>>>>>>>> maintenance=False
>>>>>>> >>>>>>>>>>>> state=AgentStopped
>>>>>>> >>>>>>>>>>>> stopped=True
>>>>>>> >>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>> Yet I can login to the web GUI fine. I guess it is not HA due
>>>>>>> >>>>>>>>>>>> to
>>>>>>> >>>>>>>>>>>> being
>>>>>>> >>>>>>>>>>>> in an unknown state currently? Does the hosted-engine-ha rpm
>>>>>>> >>>>>>>>>>>> need
>>>>>>> >>>>>>>>>>>> to
>>>>>>> >>>>>>>>>>>> be installed across all nodes in the cluster, btw?
>>>>>>> >>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>> Thanks for the help,
>>>>>>> >>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>> Cam
>>>>>>> >>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>>> Jenny Tokar
>>>>>>> >>>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>>> On Thu, Jun 15, 2017 at 6:32 PM, cmc <iucounu at gmail.com>
>>>>>>> >>>>>>>>>>>>> wrote:
>>>>>>> >>>>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>>>> Hi,
>>>>>>> >>>>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>>>> I've migrated from a bare-metal engine to a hosted engine.
>>>>>>> >>>>>>>>>>>>>> There
>>>>>>> >>>>>>>>>>>>>> were
>>>>>>> >>>>>>>>>>>>>> no errors during the install, however, the hosted engine
>>>>>>> >>>>>>>>>>>>>> did not
>>>>>>> >>>>>>>>>>>>>> get
>>>>>>> >>>>>>>>>>>>>> started. I tried running:
>>>>>>> >>>>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>>>> hosted-engine --status
>>>>>>> >>>>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>>>> on the host I deployed it on, and it returns nothing (exit
>>>>>>> >>>>>>>>>>>>>> code
>>>>>>> >>>>>>>>>>>>>> is 1
>>>>>>> >>>>>>>>>>>>>> however). I could not ping it either. So I tried starting
>>>>>>> >>>>>>>>>>>>>> it via
>>>>>>> >>>>>>>>>>>>>> 'hosted-engine --vm-start' and it returned:
>>>>>>> >>>>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>>>> Virtual machine does not exist
>>>>>>> >>>>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>>>> But it then became available. I logged into it
>>>>>>> >>>>>>>>>>>>>> successfully. It
>>>>>>> >>>>>>>>>>>>>> is not
>>>>>>> >>>>>>>>>>>>>> in the list of VMs however.
>>>>>>> >>>>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>>>> Any ideas why the hosted-engine commands fail, and why it
>>>>>>> >>>>>>>>>>>>>> is not
>>>>>>> >>>>>>>>>>>>>> in
>>>>>>> >>>>>>>>>>>>>> the list of virtual machines?
>>>>>>> >>>>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>>>> Thanks for any help,
>>>>>>> >>>>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>>>> Cam
>>>>>>> >>>>>>>>>>>>>> _______________________________________________
>>>>>>> >>>>>>>>>>>>>> Users mailing list
>>>>>>> >>>>>>>>>>>>>> Users at ovirt.org
>>>>>>> >>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>> >>>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>>>
>>>>>>> >>>>>>>>>>>
>>>>>>> >>>>>>>>>>>
>>>>>>> >>>>>>>>> _______________________________________________
>>>>>>> >>>>>>>>> Users mailing list
>>>>>>> >>>>>>>>> Users at ovirt.org
>>>>>>> >>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>> >>>>>> _______________________________________________
>>>>>>> >>>>>> Users mailing list
>>>>>>> >>>>>> Users at ovirt.org
>>>>>>> >>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>> >>>>>
>>>>>>> >>>>>
>>>>>>> > _______________________________________________
>>>>>>> > Users mailing list
>>>>>>> > Users at ovirt.org
>>>>>>> > http://lists.ovirt.org/mailman/listinfo/users
>>>>>>> >
>>>>>>> >
>>>>>>>
>>>>>>
More information about the Users
mailing list