[ovirt-users] [Gluster-users] Hot to force glusterfs to use RDMA?

Fri Mar 3 06:57:27 UTC 2017

Dear Deepak, thank you for the hints, which gluster are you using?
As you can see from my previous email that the RDMA connection tested with
qperf. It is working as expected. In my case the clients are servers as
well, they are hosts for the ovirt. Disabling selinux is nor recommended by
ovirt, but i will give a try.

Am 03.03.2017 7:50 vorm. schrieb "Deepak Naidu" <dnaidu at nvidia.com>:

I have been testing glusterfs over RDMA & below is the command I use.
Reading up the logs, it looks like your IB(InfiniBand) device is not being
initialized. I am not sure if u have an issue on the client IB or the
storage server IB. Also have you configured ur IB devices correctly. I am
using IPoIB.

Can you check your firewall, disable selinux, I think, you might have
checked it already ?

*mount -t glusterfs -o transport=rdma storageN1:/vol0 /mnt/vol0*

·         *The below error seems if you have issue starting your volume. I
had issue, when my transport was set to tcp,rdma. I had to force start my
volume. If I had set it only to tcp on the volume, the volume would start
easily.*

[2017-03-02 11:49:47.829391] E [MSGID: 114022] [client.c:2530:client_init_rpc]
0-GluReplica-client-2: failed to initialize RPC
[2017-03-02 11:49:47.829413] E [MSGID: 101019] [xlator.c:433:xlator_init]
0-GluReplica-client-2: Initialization of volume 'GluReplica-client-2'
failed, review your volfile again
[2017-03-02 11:49:47.829425] E [MSGID: 101066]
[graph.c:324:glusterfs_graph_init]
0-GluReplica-client-2: initializing translator failed
[2017-03-02 11:49:47.829436] E [MSGID: 101176]
[graph.c:673:glusterfs_graph_activate]
0-graph: init failed

·         *The below error seems if you have issue with IB device. If not
configured properly.*

[2017-03-02 11:49:47.828996] W [MSGID: 103071]
[rdma.c:4589:__gf_rdma_ctx_create]
0-rpc-transport/rdma: rdma_cm event channel creation failed [No such device]
[2017-03-02 11:49:47.829067] W [MSGID: 103055] [rdma.c:4896:init]
0-GluReplica-client-2: Failed to initialize IB Device
[2017-03-02 11:49:47.829080] W [rpc-transport.c:354:rpc_transport_load]
0-rpc-transport: 'rdma' initialization failed

--

Deepak

*From:* gluster-users-bounces at gluster.org [mailto:gluster-users-bounces@
gluster.org] *On Behalf Of *Sahina Bose
*Sent:* Thursday, March 02, 2017 10:26 PM
*To:* Arman Khalatyan; gluster-users at gluster.org; Rafi Kavungal Chundattu
Parambil
*Cc:* users
*Subject:* Re: [Gluster-users] [ovirt-users] Hot to force glusterfs to use
RDMA?

[Adding gluster users to help with error]

[2017-03-02 11:49:47.828996] W [MSGID: 103071]
[rdma.c:4589:__gf_rdma_ctx_create]
0-rpc-transport/rdma: rdma_cm event channel creation failed [No such device]

On Thu, Mar 2, 2017 at 5:36 PM, Arman Khalatyan <arm2arm at gmail.com> wrote:

BTW RDMA is working as expected:
root at clei26 ~]# qperf clei22.vib  tcp_bw tcp_lat
tcp_bw:
    bw  =  475 MB/sec
tcp_lat:
    latency  =  52.8 us
[root at clei26 ~]#

thank you beforehand.

Arman.

On Thu, Mar 2, 2017 at 12:54 PM, Arman Khalatyan <arm2arm at gmail.com> wrote:

just for reference:
 gluster volume info

Volume Name: GluReplica
Type: Replicate
Volume ID: ee686dfe-203a-4caa-a691-26353460cc48
Status: Started
Snapshot Count: 0
Number of Bricks: 1 x (2 + 1) = 3
Transport-type: tcp,rdma
Bricks:
Brick1: 10.10.10.44:/zclei22/01/glu
Brick2: 10.10.10.42:/zclei21/01/glu
Brick3: 10.10.10.41:/zclei26/01/glu (arbiter)
Options Reconfigured:
network.ping-timeout: 30
server.allow-insecure: on
storage.owner-gid: 36
storage.owner-uid: 36
cluster.data-self-heal-algorithm: full
features.shard: on
cluster.server-quorum-type: server
cluster.quorum-type: auto
network.remote-dio: enable
cluster.eager-lock: enable
performance.stat-prefetch: off
performance.io-cache: off
performance.read-ahead: off
performance.quick-read: off
performance.readdir-ahead: on
nfs.disable: on

[root at clei21 ~]# gluster volume status
Status of volume: GluReplica
Gluster process                             TCP Port  RDMA Port  Online  Pid
------------------------------------------------------------
------------------
Brick 10.10.10.44:/zclei22/01/glu           49158     49159      Y
15870
Brick 10.10.10.42:/zclei21/01/glu           49156     49157      Y
17473
Brick 10.10.10.41:/zclei26/01/glu           49153     49154      Y
18897
Self-heal Daemon on localhost               N/A       N/A        Y
17502
Self-heal Daemon on 10.10.10.41             N/A       N/A        Y
13353
Self-heal Daemon on 10.10.10.44             N/A       N/A        Y
32745

Task Status of Volume GluReplica
------------------------------------------------------------
------------------
There are no active volume tasks

On Thu, Mar 2, 2017 at 12:52 PM, Arman Khalatyan <arm2arm at gmail.com> wrote:

I am not able to mount with RDMA over cli....

Are there some volfile parameters needs to be tuned?
/usr/bin/mount  -t glusterfs  -o backup-volfile-servers=10.10.
10.44:10.10.10.42:10.10.10.41,transport=rdma 10.10.10.44:/GluReplica /mnt

[2017-03-02 11:49:47.795511] I [MSGID: 100030] [glusterfsd.c:2454:main]
0-/usr/sbin/glusterfs: Started running /usr/sbin/glusterfs version 3.8.9
(args: /usr/sbin/glusterfs --volfile-server=10.10.10.44
--volfile-server=10.10.10.44 --volfile-server=10.10.10.42
--volfile-server=10.10.10.41 --volfile-server-transport=rdma
--volfile-id=/GluReplica.rdma /mnt)
[2017-03-02 11:49:47.812699] I [MSGID: 101190]
[event-epoll.c:628:event_dispatch_epoll_worker]
0-epoll: Started thread with index 1
[2017-03-02 11:49:47.825210] I [MSGID: 101190]
[event-epoll.c:628:event_dispatch_epoll_worker]
0-epoll: Started thread with index 2
[2017-03-02 11:49:47.828996] W [MSGID: 103071]
[rdma.c:4589:__gf_rdma_ctx_create]
0-rpc-transport/rdma: rdma_cm event channel creation failed [No such device]
[2017-03-02 11:49:47.829067] W [MSGID: 103055] [rdma.c:4896:init]
0-GluReplica-client-2: Failed to initialize IB Device
[2017-03-02 11:49:47.829080] W [rpc-transport.c:354:rpc_transport_load]
0-rpc-transport: 'rdma' initialization failed
[2017-03-02 11:49:47.829272] W [rpc-clnt.c:1070:rpc_clnt_connection_init]
0-GluReplica-client-2: loading of new rpc-transport failed
[2017-03-02 11:49:47.829325] I [MSGID: 101053]
[mem-pool.c:641:mem_pool_destroy]
0-GluReplica-client-2: size=588 max=0 total=0
[2017-03-02 11:49:47.829371] I [MSGID: 101053]
[mem-pool.c:641:mem_pool_destroy]
0-GluReplica-client-2: size=124 max=0 total=0
[2017-03-02 11:49:47.829391] E [MSGID: 114022] [client.c:2530:client_init_rpc]
0-GluReplica-client-2: failed to initialize RPC
[2017-03-02 11:49:47.829413] E [MSGID: 101019] [xlator.c:433:xlator_init]
0-GluReplica-client-2: Initialization of volume 'GluReplica-client-2'
failed, review your volfile again
[2017-03-02 11:49:47.829425] E [MSGID: 101066]
[graph.c:324:glusterfs_graph_init]
0-GluReplica-client-2: initializing translator failed
[2017-03-02 11:49:47.829436] E [MSGID: 101176]
[graph.c:673:glusterfs_graph_activate]
0-graph: init failed
[2017-03-02 11:49:47.830003] W [glusterfsd.c:1327:cleanup_and_exit]
(-->/usr/sbin/glusterfs(mgmt_getspec_cbk+0x3c1) [0x7f524c9dbeb1]
-->/usr/sbin/glusterfs(glusterfs_process_volfp+0x172) [0x7f524c9d65d2]
-->/usr/sbin/glusterfs(cleanup_and_exit+0x6b) [0x7f524c9d5b4b] ) 0-:
received signum (1), shutting down
[2017-03-02 11:49:47.830053] I [fuse-bridge.c:5794:fini] 0-fuse: Unmounting
'/mnt'.
[2017-03-02 11:49:47.831014] W [glusterfsd.c:1327:cleanup_and_exit]
(-->/lib64/libpthread.so.0(+0x7dc5) [0x7f524b343dc5]
-->/usr/sbin/glusterfs(glusterfs_sigwaiter+0xe5)
[0x7f524c9d5cd5] -->/usr/sbin/glusterfs(cleanup_and_exit+0x6b)
[0x7f524c9d5b4b] ) 0-: received signum (15), shutting down
[2017-03-02 11:49:47.831014] W [glusterfsd.c:1327:cleanup_and_exit]
(-->/lib64/libpthread.so.0(+0x7dc5) [0x7f524b343dc5]
-->/usr/sbin/glusterfs(glusterfs_sigwaiter+0xe5)
[0x7f524c9d5cd5] -->/usr/sbin/glusterfs(cleanup_and_exit+0x6b)
[0x7f524c9d5b4b] ) 0-: received signum (15), shutting down

On Thu, Mar 2, 2017 at 12:11 PM, Sahina Bose <sabose at redhat.com> wrote:

You will need to pass additional mount options while creating the storage
domain (transport=rdma)

Please let us know if this works.

On Thu, Mar 2, 2017 at 2:42 PM, Arman Khalatyan <arm2arm at gmail.com> wrote:

Hi,

Are there way to force the connections over RDMA only?

If I check host mounts I cannot see rdma mount option:
 mount -l| grep gluster
10.10.10.44:/GluReplica on
/rhev/data-center/mnt/glusterSD/10.10.10.44:_GluReplica
type fuse.glusterfs (rw,relatime,user_id=0,group_id=0,default_permissions,
allow_other,max_read=131072)

I have glusterized 3 nodes:

GluReplica
Volume ID:
ee686dfe-203a-4caa-a691-26353460cc48
Volume Type:
Replicate (Arbiter)
Replica Count:
2 + 1
Number of Bricks:
3
Transport Types:
TCP, RDMA
Maximum no of snapshots:
256
Capacity:
3.51 TiB total, 190.56 GiB used, 3.33 TiB free

_______________________________________________
Users mailing list
Users at ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

------------------------------
This email message is for the sole use of the intended recipient(s) and may
contain confidential information.  Any unauthorized review, use, disclosure
or distribution is prohibited.  If you are not the intended recipient,
please contact the sender by reply email and destroy all copies of the
original message.
------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170303/3f2b51c9/attachment-0001.html>