[ovirt-users] oVirt Hosted Engine Setup fails
Simone Tiraboschi
stirabos at redhat.com
Wed Mar 15 11:22:55 UTC 2017
On Wed, Mar 15, 2017 at 12:17 PM, Manuel Luis Aznar <
manuel.luis.aznar at gmail.com> wrote:
> Hello Simone,
>
> The quoted lines on your last message are on lines 1238-1245 on the
> attached log ovirt-hosted-engine-setup file.
>
> That file is the first hosted-engine setup. But this log file is not the
> result of a host-engine-setup file. I start with the installation and while
> I was answering the question I was looking to this log file for errors and
> when I found this errors I stopped and done this:
>
> FAILED: conflicting vdsm and libvirt-qemu tls configuration.
> vdsm.conf with ssl=True requires the following changes:
> libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1
> qemu.conf: spice_tls=1.
>
> Previously to this installation I have done several installations without
> revising this log file and always getting failed installations.
>
> Please its important to note that:
>
> The currently setup which we are talking about was using repo "ovirt-release41-pre.rpm".
> After correcting that two files I do the installation and in the end it was
> completed successfully.
>
> When I have some time I will try to install again using the realease repo "
> ovirt-release41.rpm"
>
> If you have any explanation, question or remark, please go ahead...
>
>From the attached logs it seams that you voluntary interrupted the setup
from keyboard here:
2017-03-07 11:23:17 DEBUG otopi.plugins.otopi.dialog.human
dialog.__logString:204 DIALOG:SEND iptables was detected on
your computer, do you wish setup to configure it? (Yes, No)[Yes]:
2017-03-07 12:06:15 DEBUG otopi.context context._executeMethod:142 method
exception
Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/otopi/context.py", line 132, in
_executeMethod
method['method']()
File
"/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/gr-he-setup/network/firewall_manager.py",
line 157, in _customization
default=_('Yes'),
File "/usr/share/otopi/plugins/otopi/dialog/human.py", line 177, in
queryString
value = self._readline(hidden=hidden)
File "/usr/lib/python2.7/site-packages/otopi/dialog.py", line 246, in
_readline
value = self.__input.readline()
File "/usr/lib/python2.7/site-packages/otopi/main.py", line 53, in _signal
raise RuntimeError("SIG%s" % signum)
RuntimeError: SIG2
>
> I will report back.
> Thanks for all in advance
> Manuel
>
> 2017-03-13 17:29 GMT+00:00 Simone Tiraboschi <stirabos at redhat.com>:
>
>>
>>
>> On Mon, Mar 13, 2017 at 4:08 PM, Manuel Luis Aznar <
>> manuel.luis.aznar at gmail.com> wrote:
>>
>>> Hello to all there again,
>>>
>>> I was having some troubles while installing ovirt Hosted Engine, I took
>>> some look at the hosted engine setup logs while I was running the
>>> hosted-engine --deploy and I found the following in the ovirt hosted engine
>>> setup logs:
>>>
>>> lvm requires configuration
>>> libvirt is not configured for vdsm yet
>>> FAILED: conflicting vdsm and libvirt-qemu tls configuration.
>>> vdsm.conf with ssl=True requires the following changes:
>>> libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1
>>> qemu.conf: spice_tls=1.
>>>
>>>
>> hosted-engine setup is already running vdsm-tool configure --force so it
>> should configure libvirt and qemu for you, not sure why it failed.
>> Could you please attach the logs from the failed hosted-engine-setup run?
>>
>>
>>> When I saw this I stopped the setup and edited this two files (vdsm.conf
>>> and qemu.conf) set the stated configurations and run the deploy again. All
>>> was fine and I dont have any trouble the installation finished
>>> successfully. This was using ovirt-release41-pre.rpm repo.
>>>
>>> I will be trying the same installation with ovirt-release41.rpm (when I
>>> have time) and I will report what happened.
>>>
>>> Thanks for all
>>> Manuel Luis Aznar
>>>
>>>
>>>
>>> 2017-03-06 1:31 GMT+00:00 Manuel Luis Aznar <manuel.luis.aznar at gmail.com
>>> >:
>>>
>>>> Hey there,
>>>>
>>>> I have been loking around, of course as of now the following I am going
>>>> to say I suppose is not anything new to you:
>>>>
>>>> This is the status of libvirtd:
>>>>
>>>> â libvirtd.service - Virtualization daemon
>>>> Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled;
>>>> vendor preset: enabled)
>>>> Drop-In: /etc/systemd/system/libvirtd.service.d
>>>> ââunlimited-core.conf
>>>> Active: active (running) since lun 2017-03-06 01:25:05 WET; 1min 37s
>>>> ago
>>>> Docs: man:libvirtd(8)
>>>> http://libvirt.org
>>>> Main PID: 24350 (libvirtd)
>>>> CGroup: /system.slice/libvirtd.service
>>>> ââ24350 /usr/sbin/libvirtd --listen
>>>>
>>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Starting Virtualization
>>>> daemon...
>>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Started Virtualization
>>>> daemon.
>>>>
>>>>
>>>> After looking at the state I fire up the VM engine with the command
>>>> "hosted-engine --vm-start" and I got the following:
>>>>
>>>>
>>>> VM exists and is down, destroying it
>>>> Machine destroyed
>>>>
>>>> ed786811-0321-431e-be4b-2d03764c1b02
>>>> Status = WaitForLaunch
>>>> nicModel = rtl8139,pv
>>>> statusTime = 4374100040 <(437)%20410-0040>
>>>> emulatedMachine = pc
>>>> pid = 0
>>>> vmName = HostedEngine
>>>> devices = [{'index': '2', 'iface': 'ide', 'specParams': {},
>>>> 'readonly': 'true', 'deviceId': '506df4eb-e783-4451-a8a6-993fa4dbb381',
>>>> 'address': {'bus': '1', 'controller': '0', 'type': 'drive', 'target': '0',
>>>> 'unit': '0'}, 'device': 'cdrom', 'shared': 'false', 'path': '', 'type':
>>>> 'disk'}, {'index': '0', 'iface': 'virtio', 'format': 'raw', 'bootOrder':
>>>> '1', 'poolID': '00000000-0000-0000-0000-000000000000', 'volumeID':
>>>> '2bc39472-1a4b-4c7d-8ef9-1212182ad802', 'imageID':
>>>> '08288fcf-6b12-4bd1-84d3-259992e7aa6d', 'specParams': {}, 'readonly':
>>>> 'false', 'domainID': 'f44afe8d-56f9-4e1e-beee-4daa548dbad8',
>>>> 'optional': 'false', 'deviceId': '08288fcf-6b12-4bd1-84d3-259992e7aa6d',
>>>> 'address': {'slot': '0x06', 'bus': '0x00', 'domain': '0x0000', 'type':
>>>> 'pci', 'function': '0x0'}, 'device': 'disk', 'shared': 'exclusive',
>>>> 'propagateErrors': 'off', 'type': 'disk'}, {'device': 'scsi', 'model':
>>>> 'virtio-scsi', 'type': 'controller'}, {'nicModel': 'pv', 'macAddr':
>>>> '00:16:3e:65:a6:4e', 'linkActive': 'true', 'network': 'ovirtmgmt',
>>>> 'specParams': {}, 'deviceId': '84b82c6c-bcca-4983-82d5-8d1e3ab3811a',
>>>> 'address': {'slot': '0x03', 'bus': '0x00', 'domain': '0x0000', 'type':
>>>> 'pci', 'function': '0x0'}, 'device': 'bridge', 'type': 'interface'},
>>>> {'device': 'console', 'specParams': {}, 'type': 'console', 'deviceId':
>>>> '6236af73-8dab-4d14-b950-fb4ad01d4420', 'alias': 'console0'},
>>>> {'device': 'vga', 'alias': 'video0', 'type': 'video'}, {'device': 'virtio',
>>>> 'specParams': {'source': 'random'}, 'model': 'virtio', 'type': 'rng'}]
>>>> guestDiskMapping = {}
>>>> vmType = kvm
>>>> clientIp =
>>>> displaySecurePort = -1
>>>> memSize = 4096
>>>> displayPort = -1
>>>> cpuType = Broadwell
>>>> spiceSecureChannels = smain,sdisplay,sinputs,scursor
>>>> ,splayback,srecord,ssmartcard,susbredir
>>>> smp = 2
>>>> displayIp = 0
>>>> display = vnc
>>>> maxVCpus = 6
>>>>
>>>>
>>>> After that if I look again at the status of libvirtd I obtain:
>>>>
>>>>
>>>> â libvirtd.service - Virtualization daemon
>>>> Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled;
>>>> vendor preset: enabled)
>>>> Drop-In: /etc/systemd/system/libvirtd.service.d
>>>> ââunlimited-core.conf
>>>> Active: active (running) since lun 2017-03-06 01:25:05 WET; 5min ago
>>>> Docs: man:libvirtd(8)
>>>> http://libvirt.org
>>>> Main PID: 24350 (libvirtd)
>>>> CGroup: /system.slice/libvirtd.service
>>>> ââ24350 /usr/sbin/libvirtd --listen
>>>>
>>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Starting Virtualization
>>>> daemon...
>>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Started Virtualization
>>>> daemon.
>>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: libvirt version:
>>>> 2.0.0, package: 10.el7_3.5 (CentOS BuildSystem <http://bugs.centos.org>,
>>>> 2017-03-03-02:09:45, c1bm.rdu2.centos.org)
>>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: hostname:
>>>> host1.bajada.es
>>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: Falló al conectar
>>>> con el socket de monitor: No existe el proceso
>>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: internal error:
>>>> process exited while connecting to monitor: Could not access KVM kernel
>>>> module: Permission denied
>>>> failed to initialize
>>>> KVM: Permission denied
>>>>
>>>>
>>>> So the libvirtd is the problem, as i said this is nothing new to you of
>>>> course...
>>>>
>>>> Thanks again for any help
>>>> Manuel
>>>>
>>>>
>>>> 2017-03-05 18:51 GMT+00:00 Manuel Luis Aznar <
>>>> manuel.luis.aznar at gmail.com>:
>>>>
>>>>> Hey there again,
>>>>>
>>>>>
>>>>> Can you check if you have KVM modules loaded?
>>>>>
>>>>> In order to check that I fire up the following command: "lsmod |
>>>>> grep kvm"
>>>>>
>>>>> Result was:
>>>>>
>>>>> kvm_intel 170181 0
>>>>> kvm 554609 1 kvm_intel
>>>>> irqbypass 13503 1 kvm
>>>>>
>>>>>
>>>>> Also check group owner for "/dev/kvm". I fire this: "ls -la /dev/kvm".
>>>>> The result was:
>>>>>
>>>>> crw-rw-rw-+ 1 root kvm 10, 232 mar 5 03:35 /dev/kvm
>>>>>
>>>>>
>>>>> Also I check if there were some remain packages pending to install for
>>>>> kvm and qemu and I got:
>>>>>
>>>>> yum install \*kvm\*
>>>>>
>>>>> The result is, that the system need to install the following:
>>>>>
>>>>> Instalando:
>>>>> centos-release-qemu-ev noarch 1.0-1.el7
>>>>> extras 11 k
>>>>> qemu-guest-agent x86_64
>>>>> 10:2.5.0-3.el7 base
>>>>> 133 k
>>>>> qemu-kvm-ev-debuginfo x86_64
>>>>> 10:2.6.0-28.el7_3.3.1 ovirt-4.0 12 M
>>>>> vdsm-hook-faqemu noarch
>>>>> 4.18.21-1.el7.centos ovirt-4.0
>>>>> 15 k
>>>>> vdsm-hook-qemucmdline noarch
>>>>> 4.18.21-1.el7.centos ovirt-4.0
>>>>> 11 k
>>>>> Instalando para las dependencias:
>>>>> centos-release-virt-common noarch 1-1.el7.centos
>>>>> extras 4.5 k
>>>>>
>>>>>
>>>>> Checking libvirtd service status I got:
>>>>>
>>>>> libvirtd.service - Virtualization daemon
>>>>> Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled;
>>>>> vendor preset: enabled)
>>>>> Drop-In: /etc/systemd/system/libvirtd.service.d
>>>>> ââunlimited-core.conf
>>>>> Active: active (running) since dom 2017-03-05 15:56:11 WET; 2h
>>>>> 51min ago
>>>>> Docs: man:libvirtd(8)
>>>>> http://libvirt.org
>>>>> Main PID: 19415 (libvirtd)
>>>>> CGroup: /system.slice/libvirtd.service
>>>>> 19415 /usr/sbin/libvirtd --listen
>>>>>
>>>>> mar 05 15:56:10 host1.bajada.es systemd[1]: Starting Virtualization
>>>>> daemon...
>>>>> mar 05 15:56:11 host1.bajada.es systemd[1]: Started Virtualization
>>>>> daemon.
>>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]: libvirt version:
>>>>> 2.0.0, package: 10.el7_3.5 (CentOS BuildSystem <http://bugs.centos.org>,
>>>>> 2017-03-03-02:09:45, c1bm.rdu2.centos.org)
>>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]: hostname:
>>>>> host1.bajada.es
>>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]: Failed to connect to
>>>>> the socket monitor: process does not exits
>>>>>
>>>>> (Fallo al conectar con el socket de monitor: No existe el proceso)
>>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]: internal error:
>>>>> process exited while connecting to monitor: Could not access KVM kernel
>>>>> module: Permission denied
>>>>> failed to initialize
>>>>> KVM: Permission denied
>>>>>
>>>>>
>>>>> Thanks for all in advance
>>>>> I will be waiting for you. Any help appreciated
>>>>> Manuel
>>>>>
>>>>> 2017-03-05 17:33 GMT+00:00 Artyom Lukianov <alukiano at redhat.com>:
>>>>>
>>>>>> I found this one under the vdsm log:
>>>>>> libvirtError: internal error: process exited while connecting to
>>>>>> monitor: Could not access KVM kernel module: Permission denied
>>>>>> failed to initialize KVM: Permission denied
>>>>>> Thread-70::INFO::2017-03-05 16:00:04,325::vm::1330::virt.vm::(setDownStatus)
>>>>>> vmId=`ed786811-0321-431e-be4b-2d03764c1b02`::Changed state to Down:
>>>>>> internal error: process exited while connecting to monitor: Could not
>>>>>> access KVM kernel module: Permission denied
>>>>>> failed to initialize KVM: Permission denied (code=1)
>>>>>> Thread-70::INFO::2017-03-05 16:00:04,325::guestagent::430::virt.vm::(stop)
>>>>>> vmId=`ed786811-0321-431e-be4b-2d03764c1b02`::Stopping connection
>>>>>> Thread-70::DEBUG::2017-03-05 16:00:04,325::vmchannels::238::vds::(unregister)
>>>>>> Delete fileno 52 from listener.
>>>>>> Thread-70::DEBUG::2017-03-05 16:00:04,325::vmchannels::66::vds::(_unregister_fd)
>>>>>> Failed to unregister FD from epoll (ENOENT): 52
>>>>>> Thread-70::DEBUG::2017-03-05 16:00:04,326::__init__::209::jsonrpc.Notification::(emit)
>>>>>> Sending event {"params": {"ed786811-0321-431e-be4b-2d03764c1b02":
>>>>>> {"status": "Down", "exitReason": 1, "exitMessage": "internal error: process
>>>>>> exited while connecting to monitor: Could not access KVM kernel module:
>>>>>> Permission denied\nfailed to initialize KVM: Permission denied",
>>>>>> "exitCode": 1}, "notify_time": 4339924730}, "jsonrpc": "2.0", "method":
>>>>>> "|virt|VM_status|ed786811-0321-431e-be4b-2d03764c1b02"}
>>>>>>
>>>>>> Can you check if you have KVM modules loaded? Also, check group owner
>>>>>> for "/dev/kvm".
>>>>>> Best Regards
>>>>>>
>>>>>>
>>>>>> On Sat, Mar 4, 2017 at 4:24 PM, Manuel Luis Aznar <
>>>>>> manuel.luis.aznar at gmail.com> wrote:
>>>>>>
>>>>>>> Hello there again,
>>>>>>>
>>>>>>> The error on the first email was using the repo ovirt-release41.rpm (
>>>>>>> http://resources.ovirt.org/pub/yum-repo/ovirt-release41.rpm), so as
>>>>>>> I were getting the same error again and again I am currently trying with
>>>>>>> ovirt-release41-snapshot.rpm (http://resources.ovirt.org/pu
>>>>>>> b/yum-repo/ovirt-release41-snapshot.rpm) and the result is nearly
>>>>>>> the same.
>>>>>>>
>>>>>>> After creating the VM on the installation I got the same error with
>>>>>>> the command "systemctl status vdsmd":
>>>>>>>
>>>>>>> mar 04 14:10:19 host1.bajada.es vdsm[20443]: vdsm root ERROR failed
>>>>>>> to retrieve Hosted Engine HA info
>>>>>>>
>>>>>>> Traceback (most recent call last):
>>>>>>> File "/usr/lib/python2.7/site-packages/vdsm/host/api.py",
>>>>>>> line 231, in _getHaInfo
>>>>>>> stats = instance.get_all_stats()
>>>>>>> File "/usr/lib/python2.7/site-packa
>>>>>>> ges/ovirt_hosted_engine_ha/client/client.py", line 102, in
>>>>>>> get_all_stats
>>>>>>> with broker.connection(self._retries, self._wait):
>>>>>>> File "/usr/lib64/python2.7/contextlib.py", line 17, in
>>>>>>> __enter__
>>>>>>> return self.gen.next()
>>>>>>> File "/usr/lib/python2.7/site-packa
>>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line 99, in
>>>>>>> connection
>>>>>>> self.connect(retries, wait)
>>>>>>> File "/usr/lib/python2.7/site-packa
>>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line 78, in connect
>>>>>>> raise BrokerConnectionError(error_msg)
>>>>>>> BrokerConnectionError: Failed to connect to broker, the
>>>>>>> number of errors has exceeded the limit (1)
>>>>>>>
>>>>>>> mar 04 14:10:34 host1.bajada.es vdsm[20443]: vdsm
>>>>>>> ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed to
>>>>>>> connect to broker, the number of errors has exceeded the limit (1)
>>>>>>>
>>>>>>> I have noticed that the ovirt-ha-agent and ovirt-ha-broker services
>>>>>>> was not running. I guess if this have something to do with the error in
>>>>>>> vsmd service log.
>>>>>>>
>>>>>>> But in this case the ovirt-hosted-engine-installation prints the
>>>>>>> vnc connection and I can connect to the engine VM.
>>>>>>>
>>>>>>> Thanks for all in advance
>>>>>>> Any help would be appreciated
>>>>>>> Manuel Luis Aznar
>>>>>>>
>>>>>>> 2017-03-03 21:48 GMT+00:00 Manuel Luis Aznar <
>>>>>>> manuel.luis.aznar at gmail.com>:
>>>>>>>
>>>>>>>> Hello there,
>>>>>>>>
>>>>>>>> I am having some trouble when deploying an oVirt 4.1 hosted engine
>>>>>>>> installation.
>>>>>>>>
>>>>>>>> When I m just to end the installation and the hosted engine setup
>>>>>>>> script is about to start the Vm engine (appliance) it fails saying "The VM
>>>>>>>> is not powring up".
>>>>>>>>
>>>>>>>> If I double check the service vdsmd i get this error all the time:
>>>>>>>>
>>>>>>>> vdsm root ERROR failed to retrieve Hosted Engine HA info
>>>>>>>> Traceback (most recent call last):
>>>>>>>> File "/usr/lib/python2.7/site-packages/vdsm/host/api.py",
>>>>>>>> line 231, in _getHaInfo
>>>>>>>> stats = instance.get_all_stats()
>>>>>>>> File "/usr/lib/python2.7/site-packa
>>>>>>>> ges/ovirt_hosted_engine_ha/client/client.py", line 102, in
>>>>>>>> get_all_stats
>>>>>>>> with broker.connection(self._retries, self._wait):
>>>>>>>> File "/usr/lib64/python2.7/contextlib.py", line 17, in
>>>>>>>> __enter__
>>>>>>>> return self.gen.next()
>>>>>>>> File "/usr/lib/python2.7/site-packa
>>>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line 99, in
>>>>>>>> connection
>>>>>>>> self.connect(retries, wait)
>>>>>>>> File "/usr/lib/python2.7/site-packa
>>>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line 78, in connect
>>>>>>>> raise BrokerConnectionError(error_msg)
>>>>>>>> BrokerConnectionError: Failed to connect to broker, the number of
>>>>>>>> errors has exceeded the limit (1)
>>>>>>>>
>>>>>>>> Did anyone have experimented the same problem?¿? Any hint on How to
>>>>>>>> solved it?¿? I have tried several times with clean installations and always
>>>>>>>> getting the same...
>>>>>>>>
>>>>>>>> The host where I am trying to do the installation have CentOS 7...
>>>>>>>>
>>>>>>>>
>>>>>>>> Thanks for all in advance
>>>>>>>> Will be waiting for any hint to see what I am doing wrong...
>>>>>>>> Manuel Luis Aznar
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Users mailing list
>>>>>>> Users at ovirt.org
>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170315/414501a1/attachment-0001.html>
More information about the Users
mailing list