[ovirt-users] oVirt Hosted Engine Setup fails
Manuel Luis Aznar
manuel.luis.aznar at gmail.com
Mon May 1 13:14:14 UTC 2017
Hello there,
I have been looking in the internet using google why my installation of
ovirt-hosted-engine is failing.
I have found this link:
https://www.mail-archive.com/users@ovirt.org/msg40864.html (Hosted
engine install failed; vdsm upset about broker)
It seems to be the same error...
So to knarra and Jamie Lawrence my question is:
Did you manage to discover the problem?? In my instalation I am using
nfs and not gluster...
I have read the error and is the same error "BrokerConnectionError: ...".
The ovirt-ha-agent and ovirt-ha-broker did not start when the installation
is creating the engine VM...
As I have said before any help would be very appreciated...no matter whom
will give it
Thanks for all in advance
Manuel Luis Aznar
2017-05-01 12:21 GMT+01:00 Manuel Luis Aznar <manuel.luis.aznar at gmail.com>:
> Hello Simone and all the comunity,
>
> I have been doing the instalation of ovirt hosted engine again and it
> fails, libvirtd and vdsmd services are failing. They are failing with the
> following errors:
>
>
> libvirt daemon
>
> libvirtd.service - Virtualization daemon
> Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled;
> vendor preset: enabled)
> Drop-In: /etc/systemd/system/libvirtd.service.d
> ââunlimited-core.conf
> Active: active (running) since lun 2017-05-01 11:43:49 WEST; 14min ago
> Docs: man:libvirtd(8)
> http://libvirt.org
> Main PID: 21993 (libvirtd)
> CGroup: /system.slice/libvirtd.service
> ââ21993 /usr/sbin/libvirtd --listen
>
> may 01 11:43:49 host1.bajada.es systemd[1]: Starting Virtualization
> daemon...
> may 01 11:43:49 host1.bajada.es systemd[1]: Started Virtualization daemon.
> may 01 11:47:45 host1.bajada.es libvirtd[21993]: libvirt version: 2.0.0,
> package: 10.el7_3.5 (CentOS BuildSystem <http://bugs.centos.org>,
> 2017-03-03-02:09:45, c1bm.rdu2.centos.org)
> may 01 11:47:45 host1.bajada.es libvirtd[21993]: hostname: host1.bajada.es
> may 01 11:47:45 host1.bajada.es libvirtd[21993]: Falló al conectar con
> el socket de monitor: No existe el proceso
> may 01 11:47:45 host1.bajada.es libvirtd[21993]: internal error: process
> exited while connecting to monitor: /dev/random -device
> virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7 -msg timestamp=on
> Could not access KVM
> kernel module: Permission denied
> failed to initialize KVM:
> Permission denied
>
> vdsm daemon
>
> vdsmd.service - Virtual Desktop Server Manager
> Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; vendor
> preset: enabled)
> Active: active (running) since lun 2017-05-01 11:43:51 WEST; 15min ago
> Main PID: 22119 (vdsm)
> CGroup: /system.slice/vdsmd.service
> ââ22119 /usr/bin/python2 /usr/share/vdsm/vdsm
> ââ22612 /usr/libexec/ioprocess --read-pipe-fd 68
> --write-pipe-fd 67 --max-threads 10 --max-queued-requests 10
> ââ22630 /usr/libexec/ioprocess --read-pipe-fd 76
> --write-pipe-fd 75 --max-threads 10 --max-queued-requests 10
> ââ22887 /usr/libexec/ioprocess --read-pipe-fd 44
> --write-pipe-fd 43 --max-threads 10 --max-queued-requests 10
> ââ22893 /usr/libexec/ioprocess --read-pipe-fd 52
> --write-pipe-fd 50 --max-threads 10 --max-queued-requests 10
>
> may 01 11:58:37 host1.bajada.es vdsm[22119]: vdsm
> ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed to connect
> to broker, the number of errors has exceeded the limit (1)
> may 01 11:58:37 host1.bajada.es vdsm[22119]: vdsm root ERROR failed to
> retrieve Hosted Engine HA info
> Traceback (most recent call
> last):
> File
> "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line 231, in
> _getHaInfo
> stats =
> instance.get_all_stats()
> File
> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py",
> line 102, in get_all_stats
> with
> broker.connection(self._retries, self._wait):
> File "/usr/lib64/python2.7/contextlib.py",
> line 17, in __enter__
> return self.gen.next()
> File
> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
> line 99, in connection
> self.connect(retries,
> wait)
> File
> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
> line 78, in connect
> raise
> BrokerConnectionError(error_msg)
> BrokerConnectionError: Failed
> to connect to broker, the number of errors has exceeded the limit (1)
> may 01 11:58:52 host1.bajada.es vdsm[22119]: vdsm
> ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed to connect
> to broker, the number of errors has exceeded the limit (1)
>
> I have been looking to the ovirt mailing list (and also internet looking
> up in google) but I dont get what is the problem.
>
> I have attached to the mail the vdsm, ovirt-hosted-engine-setup and the
> answer of the installation. In the vdsm.log I got the following error:
>
> libvirtError: internal error: process exited while connecting to monitor:
> /dev/random -device virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7
> -msg timestamp=on
> Could not access KVM kernel module: Permission denied
> failed to initialize KVM: Permission denied
>
> I have been looking for that error but I dont get anything clear, so I
> will greatly appreciate the help of somebody...
>
> The KVM modules are loaded because if I fired up this "lsmod | grep kvm" I
> get the following:
>
> kvm_intel 170181 0
> kvm 554609 1 kvm_intel
> irqbypass 13503 1 kvm
>
> Also the group owner of /dev/kvm is:
>
> crw-rw-rw-+ 1 root kvm 10, 232 may 1 01:26 /dev/kvm
>
> Hope somebody could help
> Thanks for all in advance
> Manuel Luis Aznar
>
>
>
> 2017-03-15 11:58 GMT+00:00 Manuel Luis Aznar <manuel.luis.aznar at gmail.com>
> :
>
>> Hello there again,
>>
>> Yes that is correct. I interrupted the setup with Ctrl+C. That was
>> because while I was answering, at the same time, I was looking at this
>> file, and I saw this:
>>
>> FAILED: conflicting vdsm and libvirt-qemu tls configuration.
>> vdsm.conf with ssl=True requires the following changes:
>> libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1
>> qemu.conf: spice_tls=1.
>>
>> So I decided to interrupt the installation, because of the error, edit
>> the files (vdsm.conf and qemu.conf) and then I executed the installation
>> again and it was successful. It seams that the change of the values in that
>> files, in my case, produced a successful instalation.
>>
>> Sorry if my english is hard to understand, now you understand what I did.
>>
>> Any question, remark just go ahead
>>
>> Thanks,
>> Manuel
>>
>>
>>
>> 2017-03-15 11:22 GMT+00:00 Simone Tiraboschi <stirabos at redhat.com>:
>>
>>>
>>>
>>> On Wed, Mar 15, 2017 at 12:17 PM, Manuel Luis Aznar <
>>> manuel.luis.aznar at gmail.com> wrote:
>>>
>>>> Hello Simone,
>>>>
>>>> The quoted lines on your last message are on lines 1238-1245 on the
>>>> attached log ovirt-hosted-engine-setup file.
>>>>
>>>> That file is the first hosted-engine setup. But this log file is not
>>>> the result of a host-engine-setup file. I start with the installation and
>>>> while I was answering the question I was looking to this log file for
>>>> errors and when I found this errors I stopped and done this:
>>>>
>>>> FAILED: conflicting vdsm and libvirt-qemu tls configuration.
>>>> vdsm.conf with ssl=True requires the following changes:
>>>> libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1
>>>> qemu.conf: spice_tls=1.
>>>>
>>>> Previously to this installation I have done several installations
>>>> without revising this log file and always getting failed installations.
>>>>
>>>> Please its important to note that:
>>>>
>>>> The currently setup which we are talking about was using repo "ovirt-release41-pre.rpm".
>>>> After correcting that two files I do the installation and in the end it was
>>>> completed successfully.
>>>>
>>>> When I have some time I will try to install again using the realease
>>>> repo "ovirt-release41.rpm"
>>>>
>>>> If you have any explanation, question or remark, please go ahead...
>>>>
>>>
>>> From the attached logs it seams that you voluntary interrupted the setup
>>> from keyboard here:
>>> 2017-03-07 11:23:17 DEBUG otopi.plugins.otopi.dialog.human
>>> dialog.__logString:204 DIALOG:SEND iptables was detected on
>>> your computer, do you wish setup to configure it? (Yes, No)[Yes]:
>>> 2017-03-07 12:06:15 DEBUG otopi.context context._executeMethod:142
>>> method exception
>>> Traceback (most recent call last):
>>> File "/usr/lib/python2.7/site-packages/otopi/context.py", line 132,
>>> in _executeMethod
>>> method['method']()
>>> File "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/gr-
>>> he-setup/network/firewall_manager.py", line 157, in _customization
>>> default=_('Yes'),
>>> File "/usr/share/otopi/plugins/otopi/dialog/human.py", line 177, in
>>> queryString
>>> value = self._readline(hidden=hidden)
>>> File "/usr/lib/python2.7/site-packages/otopi/dialog.py", line 246, in
>>> _readline
>>> value = self.__input.readline()
>>> File "/usr/lib/python2.7/site-packages/otopi/main.py", line 53, in
>>> _signal
>>> raise RuntimeError("SIG%s" % signum)
>>> RuntimeError: SIG2
>>>
>>>
>>>
>>>>
>>>> I will report back.
>>>> Thanks for all in advance
>>>> Manuel
>>>>
>>>> 2017-03-13 17:29 GMT+00:00 Simone Tiraboschi <stirabos at redhat.com>:
>>>>
>>>>>
>>>>>
>>>>> On Mon, Mar 13, 2017 at 4:08 PM, Manuel Luis Aznar <
>>>>> manuel.luis.aznar at gmail.com> wrote:
>>>>>
>>>>>> Hello to all there again,
>>>>>>
>>>>>> I was having some troubles while installing ovirt Hosted Engine, I
>>>>>> took some look at the hosted engine setup logs while I was running the
>>>>>> hosted-engine --deploy and I found the following in the ovirt hosted engine
>>>>>> setup logs:
>>>>>>
>>>>>> lvm requires configuration
>>>>>> libvirt is not configured for vdsm yet
>>>>>> FAILED: conflicting vdsm and libvirt-qemu tls configuration.
>>>>>> vdsm.conf with ssl=True requires the following changes:
>>>>>> libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1
>>>>>> qemu.conf: spice_tls=1.
>>>>>>
>>>>>>
>>>>> hosted-engine setup is already running vdsm-tool configure --force so
>>>>> it should configure libvirt and qemu for you, not sure why it failed.
>>>>> Could you please attach the logs from the failed hosted-engine-setup
>>>>> run?
>>>>>
>>>>>
>>>>>> When I saw this I stopped the setup and edited this two files
>>>>>> (vdsm.conf and qemu.conf) set the stated configurations and run the deploy
>>>>>> again. All was fine and I dont have any trouble the installation finished
>>>>>> successfully. This was using ovirt-release41-pre.rpm repo.
>>>>>>
>>>>>> I will be trying the same installation with ovirt-release41.rpm (when
>>>>>> I have time) and I will report what happened.
>>>>>>
>>>>>> Thanks for all
>>>>>> Manuel Luis Aznar
>>>>>>
>>>>>>
>>>>>>
>>>>>> 2017-03-06 1:31 GMT+00:00 Manuel Luis Aznar <
>>>>>> manuel.luis.aznar at gmail.com>:
>>>>>>
>>>>>>> Hey there,
>>>>>>>
>>>>>>> I have been loking around, of course as of now the following I am
>>>>>>> going to say I suppose is not anything new to you:
>>>>>>>
>>>>>>> This is the status of libvirtd:
>>>>>>>
>>>>>>> â libvirtd.service - Virtualization daemon
>>>>>>> Loaded: loaded (/usr/lib/systemd/system/libvirtd.service;
>>>>>>> enabled; vendor preset: enabled)
>>>>>>> Drop-In: /etc/systemd/system/libvirtd.service.d
>>>>>>> ââunlimited-core.conf
>>>>>>> Active: active (running) since lun 2017-03-06 01:25:05 WET; 1min
>>>>>>> 37s ago
>>>>>>> Docs: man:libvirtd(8)
>>>>>>> http://libvirt.org
>>>>>>> Main PID: 24350 (libvirtd)
>>>>>>> CGroup: /system.slice/libvirtd.service
>>>>>>> ââ24350 /usr/sbin/libvirtd --listen
>>>>>>>
>>>>>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Starting Virtualization
>>>>>>> daemon...
>>>>>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Started Virtualization
>>>>>>> daemon.
>>>>>>>
>>>>>>>
>>>>>>> After looking at the state I fire up the VM engine with the command
>>>>>>> "hosted-engine --vm-start" and I got the following:
>>>>>>>
>>>>>>>
>>>>>>> VM exists and is down, destroying it
>>>>>>> Machine destroyed
>>>>>>>
>>>>>>> ed786811-0321-431e-be4b-2d03764c1b02
>>>>>>> Status = WaitForLaunch
>>>>>>> nicModel = rtl8139,pv
>>>>>>> statusTime = 4374100040 <(437)%20410-0040>
>>>>>>> emulatedMachine = pc
>>>>>>> pid = 0
>>>>>>> vmName = HostedEngine
>>>>>>> devices = [{'index': '2', 'iface': 'ide', 'specParams': {},
>>>>>>> 'readonly': 'true', 'deviceId': '506df4eb-e783-4451-a8a6-993fa4dbb381',
>>>>>>> 'address': {'bus': '1', 'controller': '0', 'type': 'drive', 'target': '0',
>>>>>>> 'unit': '0'}, 'device': 'cdrom', 'shared': 'false', 'path': '', 'type':
>>>>>>> 'disk'}, {'index': '0', 'iface': 'virtio', 'format': 'raw', 'bootOrder':
>>>>>>> '1', 'poolID': '00000000-0000-0000-0000-000000000000', 'volumeID':
>>>>>>> '2bc39472-1a4b-4c7d-8ef9-1212182ad802', 'imageID':
>>>>>>> '08288fcf-6b12-4bd1-84d3-259992e7aa6d', 'specParams': {},
>>>>>>> 'readonly': 'false', 'domainID': 'f44afe8d-56f9-4e1e-beee-4daa548dbad8',
>>>>>>> 'optional': 'false', 'deviceId': '08288fcf-6b12-4bd1-84d3-259992e7aa6d',
>>>>>>> 'address': {'slot': '0x06', 'bus': '0x00', 'domain': '0x0000', 'type':
>>>>>>> 'pci', 'function': '0x0'}, 'device': 'disk', 'shared': 'exclusive',
>>>>>>> 'propagateErrors': 'off', 'type': 'disk'}, {'device': 'scsi', 'model':
>>>>>>> 'virtio-scsi', 'type': 'controller'}, {'nicModel': 'pv', 'macAddr':
>>>>>>> '00:16:3e:65:a6:4e', 'linkActive': 'true', 'network': 'ovirtmgmt',
>>>>>>> 'specParams': {}, 'deviceId': '84b82c6c-bcca-4983-82d5-8d1e3ab3811a',
>>>>>>> 'address': {'slot': '0x03', 'bus': '0x00', 'domain': '0x0000', 'type':
>>>>>>> 'pci', 'function': '0x0'}, 'device': 'bridge', 'type': 'interface'},
>>>>>>> {'device': 'console', 'specParams': {}, 'type': 'console', 'deviceId':
>>>>>>> '6236af73-8dab-4d14-b950-fb4ad01d4420', 'alias': 'console0'},
>>>>>>> {'device': 'vga', 'alias': 'video0', 'type': 'video'}, {'device': 'virtio',
>>>>>>> 'specParams': {'source': 'random'}, 'model': 'virtio', 'type': 'rng'}]
>>>>>>> guestDiskMapping = {}
>>>>>>> vmType = kvm
>>>>>>> clientIp =
>>>>>>> displaySecurePort = -1
>>>>>>> memSize = 4096
>>>>>>> displayPort = -1
>>>>>>> cpuType = Broadwell
>>>>>>> spiceSecureChannels = smain,sdisplay,sinputs,scursor
>>>>>>> ,splayback,srecord,ssmartcard,susbredir
>>>>>>> smp = 2
>>>>>>> displayIp = 0
>>>>>>> display = vnc
>>>>>>> maxVCpus = 6
>>>>>>>
>>>>>>>
>>>>>>> After that if I look again at the status of libvirtd I obtain:
>>>>>>>
>>>>>>>
>>>>>>> â libvirtd.service - Virtualization daemon
>>>>>>> Loaded: loaded (/usr/lib/systemd/system/libvirtd.service;
>>>>>>> enabled; vendor preset: enabled)
>>>>>>> Drop-In: /etc/systemd/system/libvirtd.service.d
>>>>>>> ââunlimited-core.conf
>>>>>>> Active: active (running) since lun 2017-03-06 01:25:05 WET; 5min
>>>>>>> ago
>>>>>>> Docs: man:libvirtd(8)
>>>>>>> http://libvirt.org
>>>>>>> Main PID: 24350 (libvirtd)
>>>>>>> CGroup: /system.slice/libvirtd.service
>>>>>>> ââ24350 /usr/sbin/libvirtd --listen
>>>>>>>
>>>>>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Starting Virtualization
>>>>>>> daemon...
>>>>>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Started Virtualization
>>>>>>> daemon.
>>>>>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: libvirt version:
>>>>>>> 2.0.0, package: 10.el7_3.5 (CentOS BuildSystem <
>>>>>>> http://bugs.centos.org>, 2017-03-03-02:09:45, c1bm.rdu2.centos.org)
>>>>>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: hostname:
>>>>>>> host1.bajada.es
>>>>>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: Falló al conectar
>>>>>>> con el socket de monitor: No existe el proceso
>>>>>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: internal error:
>>>>>>> process exited while connecting to monitor: Could not access KVM kernel
>>>>>>> module: Permission denied
>>>>>>> failed to
>>>>>>> initialize KVM: Permission denied
>>>>>>>
>>>>>>>
>>>>>>> So the libvirtd is the problem, as i said this is nothing new to you
>>>>>>> of course...
>>>>>>>
>>>>>>> Thanks again for any help
>>>>>>> Manuel
>>>>>>>
>>>>>>>
>>>>>>> 2017-03-05 18:51 GMT+00:00 Manuel Luis Aznar <
>>>>>>> manuel.luis.aznar at gmail.com>:
>>>>>>>
>>>>>>>> Hey there again,
>>>>>>>>
>>>>>>>>
>>>>>>>> Can you check if you have KVM modules loaded?
>>>>>>>>
>>>>>>>> In order to check that I fire up the following command: "lsmod
>>>>>>>> | grep kvm"
>>>>>>>>
>>>>>>>> Result was:
>>>>>>>>
>>>>>>>> kvm_intel 170181 0
>>>>>>>> kvm 554609 1 kvm_intel
>>>>>>>> irqbypass 13503 1 kvm
>>>>>>>>
>>>>>>>>
>>>>>>>> Also check group owner for "/dev/kvm". I fire this: "ls -la
>>>>>>>> /dev/kvm". The result was:
>>>>>>>>
>>>>>>>> crw-rw-rw-+ 1 root kvm 10, 232 mar 5 03:35 /dev/kvm
>>>>>>>>
>>>>>>>>
>>>>>>>> Also I check if there were some remain packages pending to install
>>>>>>>> for kvm and qemu and I got:
>>>>>>>>
>>>>>>>> yum install \*kvm\*
>>>>>>>>
>>>>>>>> The result is, that the system need to install the following:
>>>>>>>>
>>>>>>>> Instalando:
>>>>>>>> centos-release-qemu-ev noarch 1.0-1.el7
>>>>>>>> extras 11 k
>>>>>>>> qemu-guest-agent x86_64
>>>>>>>> 10:2.5.0-3.el7 base
>>>>>>>> 133 k
>>>>>>>> qemu-kvm-ev-debuginfo x86_64
>>>>>>>> 10:2.6.0-28.el7_3.3.1 ovirt-4.0 12 M
>>>>>>>> vdsm-hook-faqemu noarch
>>>>>>>> 4.18.21-1.el7.centos ovirt-4.0
>>>>>>>> 15 k
>>>>>>>> vdsm-hook-qemucmdline noarch
>>>>>>>> 4.18.21-1.el7.centos ovirt-4.0
>>>>>>>> 11 k
>>>>>>>> Instalando para las dependencias:
>>>>>>>> centos-release-virt-common noarch 1-1.el7.centos
>>>>>>>> extras 4.5 k
>>>>>>>>
>>>>>>>>
>>>>>>>> Checking libvirtd service status I got:
>>>>>>>>
>>>>>>>> libvirtd.service - Virtualization daemon
>>>>>>>> Loaded: loaded (/usr/lib/systemd/system/libvirtd.service;
>>>>>>>> enabled; vendor preset: enabled)
>>>>>>>> Drop-In: /etc/systemd/system/libvirtd.service.d
>>>>>>>> ââunlimited-core.conf
>>>>>>>> Active: active (running) since dom 2017-03-05 15:56:11 WET; 2h
>>>>>>>> 51min ago
>>>>>>>> Docs: man:libvirtd(8)
>>>>>>>> http://libvirt.org
>>>>>>>> Main PID: 19415 (libvirtd)
>>>>>>>> CGroup: /system.slice/libvirtd.service
>>>>>>>> 19415 /usr/sbin/libvirtd --listen
>>>>>>>>
>>>>>>>> mar 05 15:56:10 host1.bajada.es systemd[1]: Starting
>>>>>>>> Virtualization daemon...
>>>>>>>> mar 05 15:56:11 host1.bajada.es systemd[1]: Started Virtualization
>>>>>>>> daemon.
>>>>>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]: libvirt version:
>>>>>>>> 2.0.0, package: 10.el7_3.5 (CentOS BuildSystem <
>>>>>>>> http://bugs.centos.org>, 2017-03-03-02:09:45, c1bm.rdu2.centos.org)
>>>>>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]: hostname:
>>>>>>>> host1.bajada.es
>>>>>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]: Failed to connect
>>>>>>>> to the socket monitor: process does not exits
>>>>>>>>
>>>>>>>> (Fallo al conectar con el socket de monitor: No existe el proceso)
>>>>>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]: internal error:
>>>>>>>> process exited while connecting to monitor: Could not access KVM kernel
>>>>>>>> module: Permission denied
>>>>>>>> failed to
>>>>>>>> initialize KVM: Permission denied
>>>>>>>>
>>>>>>>>
>>>>>>>> Thanks for all in advance
>>>>>>>> I will be waiting for you. Any help appreciated
>>>>>>>> Manuel
>>>>>>>>
>>>>>>>> 2017-03-05 17:33 GMT+00:00 Artyom Lukianov <alukiano at redhat.com>:
>>>>>>>>
>>>>>>>>> I found this one under the vdsm log:
>>>>>>>>> libvirtError: internal error: process exited while connecting to
>>>>>>>>> monitor: Could not access KVM kernel module: Permission denied
>>>>>>>>> failed to initialize KVM: Permission denied
>>>>>>>>> Thread-70::INFO::2017-03-05 16:00:04,325::vm::1330::virt.vm::(setDownStatus)
>>>>>>>>> vmId=`ed786811-0321-431e-be4b-2d03764c1b02`::Changed state to
>>>>>>>>> Down: internal error: process exited while connecting to monitor: Could not
>>>>>>>>> access KVM kernel module: Permission denied
>>>>>>>>> failed to initialize KVM: Permission denied (code=1)
>>>>>>>>> Thread-70::INFO::2017-03-05 16:00:04,325::guestagent::430::virt.vm::(stop)
>>>>>>>>> vmId=`ed786811-0321-431e-be4b-2d03764c1b02`::Stopping connection
>>>>>>>>> Thread-70::DEBUG::2017-03-05 16:00:04,325::vmchannels::238::vds::(unregister)
>>>>>>>>> Delete fileno 52 from listener.
>>>>>>>>> Thread-70::DEBUG::2017-03-05 16:00:04,325::vmchannels::66::vds::(_unregister_fd)
>>>>>>>>> Failed to unregister FD from epoll (ENOENT): 52
>>>>>>>>> Thread-70::DEBUG::2017-03-05 16:00:04,326::__init__::209::jsonrpc.Notification::(emit)
>>>>>>>>> Sending event {"params": {"ed786811-0321-431e-be4b-2d03764c1b02":
>>>>>>>>> {"status": "Down", "exitReason": 1, "exitMessage": "internal error: process
>>>>>>>>> exited while connecting to monitor: Could not access KVM kernel module:
>>>>>>>>> Permission denied\nfailed to initialize KVM: Permission denied",
>>>>>>>>> "exitCode": 1}, "notify_time": 4339924730}, "jsonrpc": "2.0", "method":
>>>>>>>>> "|virt|VM_status|ed786811-0321-431e-be4b-2d03764c1b02"}
>>>>>>>>>
>>>>>>>>> Can you check if you have KVM modules loaded? Also, check group
>>>>>>>>> owner for "/dev/kvm".
>>>>>>>>> Best Regards
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Sat, Mar 4, 2017 at 4:24 PM, Manuel Luis Aznar <
>>>>>>>>> manuel.luis.aznar at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> Hello there again,
>>>>>>>>>>
>>>>>>>>>> The error on the first email was using the repo
>>>>>>>>>> ovirt-release41.rpm (http://resources.ovirt.org/pu
>>>>>>>>>> b/yum-repo/ovirt-release41.rpm), so as I were getting the same
>>>>>>>>>> error again and again I am currently trying with
>>>>>>>>>> ovirt-release41-snapshot.rpm (http://resources.ovirt.org/pu
>>>>>>>>>> b/yum-repo/ovirt-release41-snapshot.rpm) and the result is
>>>>>>>>>> nearly the same.
>>>>>>>>>>
>>>>>>>>>> After creating the VM on the installation I got the same error
>>>>>>>>>> with the command "systemctl status vdsmd":
>>>>>>>>>>
>>>>>>>>>> mar 04 14:10:19 host1.bajada.es vdsm[20443]: vdsm root ERROR
>>>>>>>>>> failed to retrieve Hosted Engine HA info
>>>>>>>>>>
>>>>>>>>>> Traceback (most recent call last):
>>>>>>>>>> File "/usr/lib/python2.7/site-packages/vdsm/host/api.py",
>>>>>>>>>> line 231, in _getHaInfo
>>>>>>>>>> stats = instance.get_all_stats()
>>>>>>>>>> File "/usr/lib/python2.7/site-packa
>>>>>>>>>> ges/ovirt_hosted_engine_ha/client/client.py", line 102, in
>>>>>>>>>> get_all_stats
>>>>>>>>>> with broker.connection(self._retries, self._wait):
>>>>>>>>>> File "/usr/lib64/python2.7/contextlib.py", line 17,
>>>>>>>>>> in __enter__
>>>>>>>>>> return self.gen.next()
>>>>>>>>>> File "/usr/lib/python2.7/site-packa
>>>>>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line 99, in
>>>>>>>>>> connection
>>>>>>>>>> self.connect(retries, wait)
>>>>>>>>>> File "/usr/lib/python2.7/site-packa
>>>>>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line 78, in
>>>>>>>>>> connect
>>>>>>>>>> raise BrokerConnectionError(error_msg)
>>>>>>>>>> BrokerConnectionError: Failed to connect to broker, the
>>>>>>>>>> number of errors has exceeded the limit (1)
>>>>>>>>>>
>>>>>>>>>> mar 04 14:10:34 host1.bajada.es vdsm[20443]: vdsm
>>>>>>>>>> ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed to
>>>>>>>>>> connect to broker, the number of errors has exceeded the limit (1)
>>>>>>>>>>
>>>>>>>>>> I have noticed that the ovirt-ha-agent and ovirt-ha-broker
>>>>>>>>>> services was not running. I guess if this have something to do with the
>>>>>>>>>> error in vsmd service log.
>>>>>>>>>>
>>>>>>>>>> But in this case the ovirt-hosted-engine-installation prints the
>>>>>>>>>> vnc connection and I can connect to the engine VM.
>>>>>>>>>>
>>>>>>>>>> Thanks for all in advance
>>>>>>>>>> Any help would be appreciated
>>>>>>>>>> Manuel Luis Aznar
>>>>>>>>>>
>>>>>>>>>> 2017-03-03 21:48 GMT+00:00 Manuel Luis Aznar <
>>>>>>>>>> manuel.luis.aznar at gmail.com>:
>>>>>>>>>>
>>>>>>>>>>> Hello there,
>>>>>>>>>>>
>>>>>>>>>>> I am having some trouble when deploying an oVirt 4.1 hosted
>>>>>>>>>>> engine installation.
>>>>>>>>>>>
>>>>>>>>>>> When I m just to end the installation and the hosted engine
>>>>>>>>>>> setup script is about to start the Vm engine (appliance) it fails saying
>>>>>>>>>>> "The VM is not powring up".
>>>>>>>>>>>
>>>>>>>>>>> If I double check the service vdsmd i get this error all the
>>>>>>>>>>> time:
>>>>>>>>>>>
>>>>>>>>>>> vdsm root ERROR failed to retrieve Hosted Engine HA info
>>>>>>>>>>> Traceback (most recent call last):
>>>>>>>>>>> File "/usr/lib/python2.7/site-packages/vdsm/host/api.py",
>>>>>>>>>>> line 231, in _getHaInfo
>>>>>>>>>>> stats = instance.get_all_stats()
>>>>>>>>>>> File "/usr/lib/python2.7/site-packa
>>>>>>>>>>> ges/ovirt_hosted_engine_ha/client/client.py", line 102, in
>>>>>>>>>>> get_all_stats
>>>>>>>>>>> with broker.connection(self._retries, self._wait):
>>>>>>>>>>> File "/usr/lib64/python2.7/contextlib.py", line 17, in
>>>>>>>>>>> __enter__
>>>>>>>>>>> return self.gen.next()
>>>>>>>>>>> File "/usr/lib/python2.7/site-packa
>>>>>>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line 99, in
>>>>>>>>>>> connection
>>>>>>>>>>> self.connect(retries, wait)
>>>>>>>>>>> File "/usr/lib/python2.7/site-packa
>>>>>>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line 78, in
>>>>>>>>>>> connect
>>>>>>>>>>> raise BrokerConnectionError(error_msg)
>>>>>>>>>>> BrokerConnectionError: Failed to connect to broker, the number
>>>>>>>>>>> of errors has exceeded the limit (1)
>>>>>>>>>>>
>>>>>>>>>>> Did anyone have experimented the same problem?¿? Any hint on How
>>>>>>>>>>> to solved it?¿? I have tried several times with clean installations and
>>>>>>>>>>> always getting the same...
>>>>>>>>>>>
>>>>>>>>>>> The host where I am trying to do the installation have CentOS
>>>>>>>>>>> 7...
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Thanks for all in advance
>>>>>>>>>>> Will be waiting for any hint to see what I am doing wrong...
>>>>>>>>>>> Manuel Luis Aznar
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> Users mailing list
>>>>>>>>>> Users at ovirt.org
>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users at ovirt.org
>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170501/a3a11fe4/attachment-0001.html>
More information about the Users
mailing list