[ovirt-users] oVirt Hosted Engine Setup fails

Simone Tiraboschi stirabos at redhat.com
Fri May 12 16:21:19 UTC 2017


On Fri, May 12, 2017 at 1:31 PM, Manuel Luis Aznar <
manuel.luis.aznar at gmail.com> wrote:

> Hello there,
>
> Sorry for the late response, but I haven been busy doing job things...
>
> I was looking at the email of Yaniv and here are the results from my
> broken installation:
>
>      Permission on /dev/kvm and /dev/random:
>
>         [root at host1 audit]# ls -Z /dev/kvm
>              crw-rw-rw-. root kvm system_u:object_r:kvm_device_t:s0
> /dev/kvm
>         [root at host1 audit]# ls -Z /dev/random
>              crw-rw-rw-. root root system_u:object_r:random_device_t:s0
> /dev/random
>
>      Finally about SELinux settings:
>
>         [root at host1 audit]# ls -la /var/log/audit/audit.log
>             -rw-------. 1 root root 575333 may 12 12:18
> /var/log/audit/audit.log
>
>         [root at host1 audit]# ls -Z /var/log/audit/audit.log
>             -rw-------. root root system_u:object_r:auditd_log_t:s0
> /var/log/audit/audit.log
>
>         I have attached to the mail the full log audit file
> (/var/log/audit/audit.log)
>
> Again I am sorry about the delay.
>
> Any answer would be very appreciated,
>

OK, it fails here:

type=VIRT_CONTROL msg=audit(1493635665.036:776): pid=21993 uid=0
auid=4294967295 ses=4294967295
subj=system_u:system_r:virtd_t:s0-s0:c0.c1023 msg='virt=kvm op=start
reason=booted vm="HostedEngine" uuid=92faf919-b7b1-42dc-a70c-15c6eb32ba2f
vm-pid=-1 exe="/usr/sbin/libvirtd" hostname=? addr=? terminal=? res=failed'

Can you please share your /etc/libvirt/qemu.conf ?

Maybe you can also try running:
   vdsm-tool configure --force
   systemcl restart libvirtd
   systemcl restart vdsmd
and try again


> Manuel
>
> 2017-05-07 7:46 GMT+01:00 Yaniv Kaul <ykaul at redhat.com>:
>
>>
>>
>> On Thu, May 4, 2017 at 8:45 PM, Manuel Luis Aznar <
>> manuel.luis.aznar at gmail.com> wrote:
>>
>>> Hello there,
>>>
>>> Sorry for the delay to answer the mail, but, I have been busy doing
>>> things...
>>>
>>> The permission on /dev/random are the following:
>>>
>>> [root at host1 manuel]# ls -la /dev/random
>>> crw-rw-rw-. 1 root root 1, 8 may  4 18:06 /dev/random
>>>
>>> Suppose that these permission should look something like:
>>>
>>> [root at host1 manuel]# ls -la /dev/random
>>> crw-rw-rw-. 1 vdsm kvm 1, 8 may  4 18:06 /dev/random
>>>
>>> Finally I do not know what you meant with permission on SELinux audit
>>> logs?¿? Sorry for my lack of understanding, so, please let me know much
>>> more precisely and I will look for it
>>>
>>
>> You can get the selinux settings of a file with ls -Z . For example:
>> [ykaul at ykaul ovirt-system-tests]$ ls -Z /dev/kvm
>> system_u:object_r:kvm_device_t:s0 /dev/kv
>>
>> Also, you can search for selinux issues either in /var/log/audit or using
>> ausearch. For example:
>> sudo ausearch -m AVC -i
>>
>> Y.
>>
>>>
>>>
>>> Thanks for all in advance
>>> I will be waiting for you
>>> Manuel Luis Aznar
>>>
>>> 2017-05-03 15:09 GMT+01:00 Simone Tiraboschi <stirabos at redhat.com>:
>>>
>>>>
>>>>
>>>> On Wed, May 3, 2017 at 11:30 AM, Manuel Luis Aznar <
>>>> manuel.luis.aznar at gmail.com> wrote:
>>>>
>>>>> Hello Simone and all others,
>>>>>
>>>>> I have attached to the mail the requested files. If you have any other
>>>>> inquiry just say it, The failed installation drive would be keep safe until
>>>>> solving this problem.
>>>>>
>>>>> Thanks for all in advance
>>>>> Manuel
>>>>>
>>>>
>>>> The issue is here:
>>>> May  1 11:47:45 host1 journal: libvirt version: 2.0.0, package:
>>>> 10.el7_3.5 (CentOS BuildSystem <http://bugs.centos.org>,
>>>> 2017-03-03-02:09:45, c1bm.rdu2.centos.org)
>>>> May  1 11:47:45 host1 journal: hostname: host1.bajada.es
>>>> May  1 11:47:45 host1 journal: Falló al conectar con el socket de
>>>> monitor: No existe el proceso
>>>> May  1 11:47:45 host1 journal: internal error: process exited while
>>>> connecting to monitor: /dev/random -device virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7
>>>> -msg timestamp=on#012Could not access KVM kernel module: Permission
>>>> denied#012failed to initialize KVM: Permission denied
>>>> May  1 11:47:45 host1 journal: libvirt version: 2.0.0, package:
>>>> 10.el7_3.5 (CentOS BuildSystem <http://bugs.centos.org>,
>>>> 2017-03-03-02:09:45, c1bm.rdu2.centos.org)
>>>> May  1 11:47:45 host1 journal: hostname: host1.bajada.es
>>>> May  1 11:47:45 host1 journal: Fin de archivo al leer datos: Error de
>>>> entrada/salida
>>>> May  1 11:47:45 host1 journal: Fin de archivo al leer datos: Error de
>>>> entrada/salida
>>>>
>>>> could you please also check the permission on /dev/random and SELinux
>>>> audit logs?
>>>>
>>>>
>>>>
>>>>>
>>>>> 2017-05-02 10:55 GMT+01:00 Simone Tiraboschi <stirabos at redhat.com>:
>>>>>
>>>>>> Sure, but first we need to understand what it's happening: in our CI
>>>>>> process everything is fine so I think it's something specific to your env.
>>>>>> Could you please share your:
>>>>>> /var/log/libvirt/qemu/HostedEngine.log
>>>>>> /var/log/messages
>>>>>>
>>>>>> thanks,
>>>>>> Simone
>>>>>>
>>>>>>
>>>>>> On Tue, May 2, 2017 at 11:38 AM, Manuel Luis Aznar <
>>>>>> manuel.luis.aznar at gmail.com> wrote:
>>>>>>
>>>>>>> Ok thankyou.
>>>>>>>
>>>>>>> Suppose that this problem probably would be solve in a future
>>>>>>> release.
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Manuel
>>>>>>>
>>>>>>> 2017-05-02 10:35 GMT+01:00 Simone Tiraboschi <stirabos at redhat.com>:
>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, May 2, 2017 at 11:30 AM, Manuel Luis Aznar <
>>>>>>>> manuel.luis.aznar at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Hello there again,
>>>>>>>>>
>>>>>>>>> Yes as I say, I have done several clean installations and the VM
>>>>>>>>> engine sometimes starts without any problem. So Simone any recommendation
>>>>>>>>> to make the engine VM starts properly?¿
>>>>>>>>>
>>>>>>>>> While is installing the HA agent and HA broker are down, would I
>>>>>>>>> get good result by starting the services myself?¿
>>>>>>>>>
>>>>>>>>> Any help from Simone or somebody would be appreciated
>>>>>>>>> Thanks for all in advance
>>>>>>>>> Manuel Luis Aznar
>>>>>>>>>
>>>>>>>>
>>>>>>>> I suggest to check libvirt logs.
>>>>>>>>
>>>>>>>>
>>>>>>>>>
>>>>>>>>> 2017-05-02 7:54 GMT+01:00 Simone Tiraboschi <stirabos at redhat.com>:
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Mon, May 1, 2017 at 3:14 PM, Manuel Luis Aznar <
>>>>>>>>>> manuel.luis.aznar at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hello there,
>>>>>>>>>>>
>>>>>>>>>>> I have been looking in the internet using google why my
>>>>>>>>>>> installation of ovirt-hosted-engine is failing.
>>>>>>>>>>>
>>>>>>>>>>> I have found this link:
>>>>>>>>>>>
>>>>>>>>>>>      https://www.mail-archive.com/users@ovirt.org/msg40864.html
>>>>>>>>>>> (Hosted engine install failed; vdsm upset about broker)
>>>>>>>>>>>
>>>>>>>>>>> It seems to be the same error...
>>>>>>>>>>>
>>>>>>>>>>> So to knarra and Jamie Lawrence my question is:
>>>>>>>>>>>
>>>>>>>>>>>     Did you manage to discover the problem?? In my instalation I
>>>>>>>>>>> am using nfs and not gluster...
>>>>>>>>>>>
>>>>>>>>>>> I have read the error and is the same error
>>>>>>>>>>> "BrokerConnectionError: ...". The ovirt-ha-agent and ovirt-ha-broker did
>>>>>>>>>>> not start when the installation is creating the engine VM...
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> This is just a false positive: the HA agent and the HA broker are
>>>>>>>>>> still down so vdsm is complaining but at that point it's absolutely fine by
>>>>>>>>>> itself since the engine VM still doesn't exists.
>>>>>>>>>> We already have an open bug to reduce the impact of that message.
>>>>>>>>>>
>>>>>>>>>> The real issue is that for some reason the engine VM could not
>>>>>>>>>> start on your system.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> As I have said before any help would be very appreciated...no
>>>>>>>>>>> matter whom will give it
>>>>>>>>>>> Thanks for all in advance
>>>>>>>>>>> Manuel Luis Aznar
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> 2017-05-01 12:21 GMT+01:00 Manuel Luis Aznar <
>>>>>>>>>>> manuel.luis.aznar at gmail.com>:
>>>>>>>>>>>
>>>>>>>>>>>> Hello Simone and all the comunity,
>>>>>>>>>>>>
>>>>>>>>>>>> I have been doing the instalation of ovirt hosted engine again
>>>>>>>>>>>> and it fails, libvirtd and vdsmd services are failing. They are failing
>>>>>>>>>>>> with the following errors:
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> libvirt daemon
>>>>>>>>>>>>
>>>>>>>>>>>>   libvirtd.service - Virtualization daemon
>>>>>>>>>>>>    Loaded: loaded (/usr/lib/systemd/system/libvirtd.service;
>>>>>>>>>>>> enabled; vendor preset: enabled)
>>>>>>>>>>>>   Drop-In: /etc/systemd/system/libvirtd.service.d
>>>>>>>>>>>>            ââunlimited-core.conf
>>>>>>>>>>>>    Active: active (running) since lun 2017-05-01 11:43:49 WEST;
>>>>>>>>>>>> 14min ago
>>>>>>>>>>>>      Docs: man:libvirtd(8)
>>>>>>>>>>>>            http://libvirt.org
>>>>>>>>>>>>  Main PID: 21993 (libvirtd)
>>>>>>>>>>>>    CGroup: /system.slice/libvirtd.service
>>>>>>>>>>>>            ââ21993 /usr/sbin/libvirtd --listen
>>>>>>>>>>>>
>>>>>>>>>>>> may 01 11:43:49 host1.bajada.es systemd[1]: Starting
>>>>>>>>>>>> Virtualization daemon...
>>>>>>>>>>>> may 01 11:43:49 host1.bajada.es systemd[1]: Started
>>>>>>>>>>>> Virtualization daemon.
>>>>>>>>>>>> may 01 11:47:45 host1.bajada.es libvirtd[21993]: libvirt
>>>>>>>>>>>> version: 2.0.0, package: 10.el7_3.5 (CentOS BuildSystem <
>>>>>>>>>>>> http://bugs.centos.org>, 2017-03-03-02:09:45,
>>>>>>>>>>>> c1bm.rdu2.centos.org)
>>>>>>>>>>>> may 01 11:47:45 host1.bajada.es libvirtd[21993]: hostname:
>>>>>>>>>>>> host1.bajada.es
>>>>>>>>>>>> may 01 11:47:45 host1.bajada.es libvirtd[21993]: Falló al
>>>>>>>>>>>> conectar con el socket de monitor: No existe el proceso
>>>>>>>>>>>> may 01 11:47:45 host1.bajada.es libvirtd[21993]: internal
>>>>>>>>>>>> error: process exited while connecting to monitor: /dev/random -device
>>>>>>>>>>>> virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7 -msg
>>>>>>>>>>>> timestamp=on
>>>>>>>>>>>>                                                  Could not
>>>>>>>>>>>> access KVM kernel module: Permission denied
>>>>>>>>>>>>                                                  failed to
>>>>>>>>>>>> initialize KVM: Permission denied
>>>>>>>>>>>>
>>>>>>>>>>>> vdsm daemon
>>>>>>>>>>>>
>>>>>>>>>>>>   vdsmd.service - Virtual Desktop Server Manager
>>>>>>>>>>>>    Loaded: loaded (/usr/lib/systemd/system/vdsmd.service;
>>>>>>>>>>>> enabled; vendor preset: enabled)
>>>>>>>>>>>>    Active: active (running) since lun 2017-05-01 11:43:51 WEST;
>>>>>>>>>>>> 15min ago
>>>>>>>>>>>>  Main PID: 22119 (vdsm)
>>>>>>>>>>>>    CGroup: /system.slice/vdsmd.service
>>>>>>>>>>>>            ââ22119 /usr/bin/python2 /usr/share/vdsm/vdsm
>>>>>>>>>>>>            ââ22612 /usr/libexec/ioprocess --read-pipe-fd 68
>>>>>>>>>>>> --write-pipe-fd 67 --max-threads 10 --max-queued-requests 10
>>>>>>>>>>>>            ââ22630 /usr/libexec/ioprocess --read-pipe-fd 76
>>>>>>>>>>>> --write-pipe-fd 75 --max-threads 10 --max-queued-requests 10
>>>>>>>>>>>>            ââ22887 /usr/libexec/ioprocess --read-pipe-fd 44
>>>>>>>>>>>> --write-pipe-fd 43 --max-threads 10 --max-queued-requests 10
>>>>>>>>>>>>            ââ22893 /usr/libexec/ioprocess --read-pipe-fd 52
>>>>>>>>>>>> --write-pipe-fd 50 --max-threads 10 --max-queued-requests 10
>>>>>>>>>>>>
>>>>>>>>>>>> may 01 11:58:37 host1.bajada.es vdsm[22119]: vdsm
>>>>>>>>>>>> ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed
>>>>>>>>>>>> to connect to broker, the number of errors has exceeded the limit (1)
>>>>>>>>>>>> may 01 11:58:37 host1.bajada.es vdsm[22119]: vdsm root ERROR
>>>>>>>>>>>> failed to retrieve Hosted Engine HA info
>>>>>>>>>>>>                                              Traceback (most
>>>>>>>>>>>> recent call last):
>>>>>>>>>>>>                                                File
>>>>>>>>>>>> "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line 231,
>>>>>>>>>>>> in _getHaInfo
>>>>>>>>>>>>                                                  stats =
>>>>>>>>>>>> instance.get_all_stats()
>>>>>>>>>>>>                                                File
>>>>>>>>>>>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py",
>>>>>>>>>>>> line 102, in get_all_stats
>>>>>>>>>>>>                                                  with
>>>>>>>>>>>> broker.connection(self._retries, self._wait):
>>>>>>>>>>>>                                                File
>>>>>>>>>>>> "/usr/lib64/python2.7/contextlib.py", line 17, in __enter__
>>>>>>>>>>>>                                                  return
>>>>>>>>>>>> self.gen.next()
>>>>>>>>>>>>                                                File
>>>>>>>>>>>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
>>>>>>>>>>>> line 99, in connection
>>>>>>>>>>>>
>>>>>>>>>>>>  self.connect(retries, wait)
>>>>>>>>>>>>                                                File
>>>>>>>>>>>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
>>>>>>>>>>>> line 78, in connect
>>>>>>>>>>>>                                                  raise
>>>>>>>>>>>> BrokerConnectionError(error_msg)
>>>>>>>>>>>>
>>>>>>>>>>>>  BrokerConnectionError: Failed to connect to broker, the number of errors
>>>>>>>>>>>> has exceeded the limit (1)
>>>>>>>>>>>> may 01 11:58:52 host1.bajada.es vdsm[22119]: vdsm
>>>>>>>>>>>> ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed
>>>>>>>>>>>> to connect to broker, the number of errors has exceeded the limit (1)
>>>>>>>>>>>>
>>>>>>>>>>>> I have been looking to the ovirt mailing list (and also
>>>>>>>>>>>> internet looking up in google) but I dont get what is the problem.
>>>>>>>>>>>>
>>>>>>>>>>>> I have attached to the mail the vdsm, ovirt-hosted-engine-setup
>>>>>>>>>>>> and the answer of the installation. In the vdsm.log I got the following
>>>>>>>>>>>> error:
>>>>>>>>>>>>
>>>>>>>>>>>> libvirtError: internal error: process exited while connecting
>>>>>>>>>>>> to monitor: /dev/random -device virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7
>>>>>>>>>>>> -msg timestamp=on
>>>>>>>>>>>> Could not access KVM kernel module: Permission denied
>>>>>>>>>>>> failed to initialize KVM: Permission denied
>>>>>>>>>>>>
>>>>>>>>>>>> I have been looking for that error but I dont get anything
>>>>>>>>>>>> clear, so I will greatly appreciate the help of somebody...
>>>>>>>>>>>>
>>>>>>>>>>>> The KVM modules are loaded because if I fired up this "lsmod |
>>>>>>>>>>>> grep kvm" I get the following:
>>>>>>>>>>>>
>>>>>>>>>>>> kvm_intel             170181  0
>>>>>>>>>>>> kvm                   554609  1 kvm_intel
>>>>>>>>>>>> irqbypass              13503  1 kvm
>>>>>>>>>>>>
>>>>>>>>>>>> Also the group owner of /dev/kvm is:
>>>>>>>>>>>>
>>>>>>>>>>>> crw-rw-rw-+ 1 root kvm 10, 232 may  1 01:26 /dev/kvm
>>>>>>>>>>>>
>>>>>>>>>>>> Hope somebody could help
>>>>>>>>>>>> Thanks for all in advance
>>>>>>>>>>>> Manuel Luis Aznar
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> 2017-03-15 11:58 GMT+00:00 Manuel Luis Aznar <
>>>>>>>>>>>> manuel.luis.aznar at gmail.com>:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hello there again,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Yes that is correct. I interrupted the setup with Ctrl+C. That
>>>>>>>>>>>>> was because while I was answering, at the same time, I was looking at this
>>>>>>>>>>>>> file, and I saw this:
>>>>>>>>>>>>>
>>>>>>>>>>>>> FAILED: conflicting vdsm and libvirt-qemu tls configuration.
>>>>>>>>>>>>> vdsm.conf with ssl=True requires the following changes:
>>>>>>>>>>>>> libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1
>>>>>>>>>>>>> qemu.conf: spice_tls=1.
>>>>>>>>>>>>>
>>>>>>>>>>>>> So I decided to interrupt the installation, because of the
>>>>>>>>>>>>> error, edit the files (vdsm.conf and qemu.conf) and then I executed the
>>>>>>>>>>>>> installation again and it was successful. It seams that the change of the
>>>>>>>>>>>>> values in that files, in my case, produced a successful instalation.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Sorry if my english is hard to understand, now you understand
>>>>>>>>>>>>> what I did.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Any question, remark just go ahead
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>> Manuel
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> 2017-03-15 11:22 GMT+00:00 Simone Tiraboschi <
>>>>>>>>>>>>> stirabos at redhat.com>:
>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Wed, Mar 15, 2017 at 12:17 PM, Manuel Luis Aznar <
>>>>>>>>>>>>>> manuel.luis.aznar at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hello Simone,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> The quoted lines on your last message are on lines 1238-1245
>>>>>>>>>>>>>>> on the attached log ovirt-hosted-engine-setup file.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> That file is the first hosted-engine setup. But this log
>>>>>>>>>>>>>>> file is not the result of a host-engine-setup file. I start with the
>>>>>>>>>>>>>>> installation and while I was answering the question I was looking to this
>>>>>>>>>>>>>>> log file for errors and when I found this errors I stopped and done this:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> FAILED: conflicting vdsm and libvirt-qemu tls configuration.
>>>>>>>>>>>>>>> vdsm.conf with ssl=True requires the following changes:
>>>>>>>>>>>>>>> libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1
>>>>>>>>>>>>>>> qemu.conf: spice_tls=1.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Previously to this installation I have done several
>>>>>>>>>>>>>>> installations without revising this log file and always getting failed
>>>>>>>>>>>>>>> installations.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Please its important to note that:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>      The currently setup which we are talking about was
>>>>>>>>>>>>>>> using repo "ovirt-release41-pre.rpm". After correcting that
>>>>>>>>>>>>>>> two files I do the installation and in the end it was completed
>>>>>>>>>>>>>>> successfully.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> When I have some time I will try to install again using the
>>>>>>>>>>>>>>> realease repo "ovirt-release41.rpm"
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> If you have any explanation, question or remark, please go
>>>>>>>>>>>>>>> ahead...
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> From the attached logs it seams that you voluntary
>>>>>>>>>>>>>> interrupted the setup from keyboard here:
>>>>>>>>>>>>>> 2017-03-07 11:23:17 DEBUG otopi.plugins.otopi.dialog.human
>>>>>>>>>>>>>> dialog.__logString:204 DIALOG:SEND                 iptables was detected on
>>>>>>>>>>>>>> your computer, do you wish setup to configure it? (Yes, No)[Yes]:
>>>>>>>>>>>>>> 2017-03-07 12:06:15 DEBUG otopi.context
>>>>>>>>>>>>>> context._executeMethod:142 method exception
>>>>>>>>>>>>>> Traceback (most recent call last):
>>>>>>>>>>>>>>   File "/usr/lib/python2.7/site-packages/otopi/context.py",
>>>>>>>>>>>>>> line 132, in _executeMethod
>>>>>>>>>>>>>>     method['method']()
>>>>>>>>>>>>>>   File "/usr/share/ovirt-hosted-engin
>>>>>>>>>>>>>> e-setup/scripts/../plugins/gr-he-setup/network/firewall_manager.py",
>>>>>>>>>>>>>> line 157, in _customization
>>>>>>>>>>>>>>     default=_('Yes'),
>>>>>>>>>>>>>>   File "/usr/share/otopi/plugins/otopi/dialog/human.py",
>>>>>>>>>>>>>> line 177, in queryString
>>>>>>>>>>>>>>     value = self._readline(hidden=hidden)
>>>>>>>>>>>>>>   File "/usr/lib/python2.7/site-packages/otopi/dialog.py",
>>>>>>>>>>>>>> line 246, in _readline
>>>>>>>>>>>>>>     value = self.__input.readline()
>>>>>>>>>>>>>>   File "/usr/lib/python2.7/site-packages/otopi/main.py",
>>>>>>>>>>>>>> line 53, in _signal
>>>>>>>>>>>>>>     raise RuntimeError("SIG%s" % signum)
>>>>>>>>>>>>>> RuntimeError: SIG2
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I will report back.
>>>>>>>>>>>>>>> Thanks for all in advance
>>>>>>>>>>>>>>> Manuel
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 2017-03-13 17:29 GMT+00:00 Simone Tiraboschi <
>>>>>>>>>>>>>>> stirabos at redhat.com>:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Mon, Mar 13, 2017 at 4:08 PM, Manuel Luis Aznar <
>>>>>>>>>>>>>>>> manuel.luis.aznar at gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hello to all there again,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I was having some troubles while installing ovirt Hosted
>>>>>>>>>>>>>>>>> Engine, I took some look at the hosted engine setup logs while I was
>>>>>>>>>>>>>>>>> running the hosted-engine --deploy and I found the following in the ovirt
>>>>>>>>>>>>>>>>> hosted engine setup logs:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> lvm requires configuration
>>>>>>>>>>>>>>>>> libvirt is not configured for vdsm yet
>>>>>>>>>>>>>>>>> FAILED: conflicting vdsm and libvirt-qemu tls
>>>>>>>>>>>>>>>>> configuration.
>>>>>>>>>>>>>>>>> vdsm.conf with ssl=True requires the following changes:
>>>>>>>>>>>>>>>>> libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1
>>>>>>>>>>>>>>>>> qemu.conf: spice_tls=1.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> hosted-engine setup is already running vdsm-tool configure
>>>>>>>>>>>>>>>> --force so it should configure libvirt and qemu for you, not sure why it
>>>>>>>>>>>>>>>> failed.
>>>>>>>>>>>>>>>> Could you please attach the logs from the failed
>>>>>>>>>>>>>>>> hosted-engine-setup run?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> When I saw this I stopped the setup and edited this two
>>>>>>>>>>>>>>>>> files (vdsm.conf and qemu.conf) set the stated configurations and run the
>>>>>>>>>>>>>>>>> deploy again. All was fine and I dont have any trouble the installation
>>>>>>>>>>>>>>>>> finished successfully. This was using ovirt-release41-pre.rpm repo.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I will be trying the same installation with
>>>>>>>>>>>>>>>>> ovirt-release41.rpm (when I have time) and I will report what happened.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Thanks for all
>>>>>>>>>>>>>>>>> Manuel Luis Aznar
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> 2017-03-06 1:31 GMT+00:00 Manuel Luis Aznar <
>>>>>>>>>>>>>>>>> manuel.luis.aznar at gmail.com>:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Hey there,
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> I have been loking around, of course as of now the
>>>>>>>>>>>>>>>>>> following I am going to say I suppose is not anything new to you:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> This is the status of libvirtd:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> â libvirtd.service - Virtualization daemon
>>>>>>>>>>>>>>>>>>    Loaded: loaded (/usr/lib/systemd/system/libvirtd.service;
>>>>>>>>>>>>>>>>>> enabled; vendor preset: enabled)
>>>>>>>>>>>>>>>>>>   Drop-In: /etc/systemd/system/libvirtd.service.d
>>>>>>>>>>>>>>>>>>            ââunlimited-core.conf
>>>>>>>>>>>>>>>>>>    Active: active (running) since lun 2017-03-06 01:25:05
>>>>>>>>>>>>>>>>>> WET; 1min 37s ago
>>>>>>>>>>>>>>>>>>      Docs: man:libvirtd(8)
>>>>>>>>>>>>>>>>>>            http://libvirt.org
>>>>>>>>>>>>>>>>>>  Main PID: 24350 (libvirtd)
>>>>>>>>>>>>>>>>>>    CGroup: /system.slice/libvirtd.service
>>>>>>>>>>>>>>>>>>            ââ24350 /usr/sbin/libvirtd --listen
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Starting
>>>>>>>>>>>>>>>>>> Virtualization daemon...
>>>>>>>>>>>>>>>>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Started
>>>>>>>>>>>>>>>>>> Virtualization daemon.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> After looking at the state I fire up the VM engine with
>>>>>>>>>>>>>>>>>> the command "hosted-engine --vm-start" and I got the following:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> VM exists and is down, destroying it
>>>>>>>>>>>>>>>>>> Machine destroyed
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> ed786811-0321-431e-be4b-2d03764c1b02
>>>>>>>>>>>>>>>>>>         Status = WaitForLaunch
>>>>>>>>>>>>>>>>>>         nicModel = rtl8139,pv
>>>>>>>>>>>>>>>>>>         statusTime = 4374100040 <(437)%20410-0040>
>>>>>>>>>>>>>>>>>>         emulatedMachine = pc
>>>>>>>>>>>>>>>>>>         pid = 0
>>>>>>>>>>>>>>>>>>         vmName = HostedEngine
>>>>>>>>>>>>>>>>>>         devices = [{'index': '2', 'iface': 'ide',
>>>>>>>>>>>>>>>>>> 'specParams': {}, 'readonly': 'true', 'deviceId':
>>>>>>>>>>>>>>>>>> '506df4eb-e783-4451-a8a6-993fa4dbb381', 'address':
>>>>>>>>>>>>>>>>>> {'bus': '1', 'controller': '0', 'type': 'drive', 'target': '0', 'unit':
>>>>>>>>>>>>>>>>>> '0'}, 'device': 'cdrom', 'shared': 'false', 'path': '', 'type': 'disk'},
>>>>>>>>>>>>>>>>>> {'index': '0', 'iface': 'virtio', 'format': 'raw', 'bootOrder': '1',
>>>>>>>>>>>>>>>>>> 'poolID': '00000000-0000-0000-0000-000000000000',
>>>>>>>>>>>>>>>>>> 'volumeID': '2bc39472-1a4b-4c7d-8ef9-1212182ad802',
>>>>>>>>>>>>>>>>>> 'imageID': '08288fcf-6b12-4bd1-84d3-259992e7aa6d',
>>>>>>>>>>>>>>>>>> 'specParams': {}, 'readonly': 'false', 'domainID':
>>>>>>>>>>>>>>>>>> 'f44afe8d-56f9-4e1e-beee-4daa548dbad8', 'optional':
>>>>>>>>>>>>>>>>>> 'false', 'deviceId': '08288fcf-6b12-4bd1-84d3-259992e7aa6d',
>>>>>>>>>>>>>>>>>> 'address': {'slot': '0x06', 'bus': '0x00', 'domain': '0x0000', 'type':
>>>>>>>>>>>>>>>>>> 'pci', 'function': '0x0'}, 'device': 'disk', 'shared': 'exclusive',
>>>>>>>>>>>>>>>>>> 'propagateErrors': 'off', 'type': 'disk'}, {'device': 'scsi', 'model':
>>>>>>>>>>>>>>>>>> 'virtio-scsi', 'type': 'controller'}, {'nicModel': 'pv', 'macAddr':
>>>>>>>>>>>>>>>>>> '00:16:3e:65:a6:4e', 'linkActive': 'true', 'network': 'ovirtmgmt',
>>>>>>>>>>>>>>>>>> 'specParams': {}, 'deviceId': '84b82c6c-bcca-4983-82d5-8d1e3ab3811a',
>>>>>>>>>>>>>>>>>> 'address': {'slot': '0x03', 'bus': '0x00', 'domain': '0x0000', 'type':
>>>>>>>>>>>>>>>>>> 'pci', 'function': '0x0'}, 'device': 'bridge', 'type': 'interface'},
>>>>>>>>>>>>>>>>>> {'device': 'console', 'specParams': {}, 'type': 'console', 'deviceId':
>>>>>>>>>>>>>>>>>> '6236af73-8dab-4d14-b950-fb4ad01d4420', 'alias':
>>>>>>>>>>>>>>>>>> 'console0'}, {'device': 'vga', 'alias': 'video0', 'type': 'video'},
>>>>>>>>>>>>>>>>>> {'device': 'virtio', 'specParams': {'source': 'random'}, 'model': 'virtio',
>>>>>>>>>>>>>>>>>> 'type': 'rng'}]
>>>>>>>>>>>>>>>>>>         guestDiskMapping = {}
>>>>>>>>>>>>>>>>>>         vmType = kvm
>>>>>>>>>>>>>>>>>>         clientIp =
>>>>>>>>>>>>>>>>>>         displaySecurePort = -1
>>>>>>>>>>>>>>>>>>         memSize = 4096
>>>>>>>>>>>>>>>>>>         displayPort = -1
>>>>>>>>>>>>>>>>>>         cpuType = Broadwell
>>>>>>>>>>>>>>>>>>         spiceSecureChannels =
>>>>>>>>>>>>>>>>>> smain,sdisplay,sinputs,scursor
>>>>>>>>>>>>>>>>>> ,splayback,srecord,ssmartcard,susbredir
>>>>>>>>>>>>>>>>>>         smp = 2
>>>>>>>>>>>>>>>>>>         displayIp = 0
>>>>>>>>>>>>>>>>>>         display = vnc
>>>>>>>>>>>>>>>>>>         maxVCpus = 6
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> After that if I look again at the status of libvirtd I
>>>>>>>>>>>>>>>>>> obtain:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> â libvirtd.service - Virtualization daemon
>>>>>>>>>>>>>>>>>>    Loaded: loaded (/usr/lib/systemd/system/libvirtd.service;
>>>>>>>>>>>>>>>>>> enabled; vendor preset: enabled)
>>>>>>>>>>>>>>>>>>   Drop-In: /etc/systemd/system/libvirtd.service.d
>>>>>>>>>>>>>>>>>>            ââunlimited-core.conf
>>>>>>>>>>>>>>>>>>    Active: active (running) since lun 2017-03-06 01:25:05
>>>>>>>>>>>>>>>>>> WET; 5min ago
>>>>>>>>>>>>>>>>>>      Docs: man:libvirtd(8)
>>>>>>>>>>>>>>>>>>            http://libvirt.org
>>>>>>>>>>>>>>>>>>  Main PID: 24350 (libvirtd)
>>>>>>>>>>>>>>>>>>    CGroup: /system.slice/libvirtd.service
>>>>>>>>>>>>>>>>>>            ââ24350 /usr/sbin/libvirtd --listen
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Starting
>>>>>>>>>>>>>>>>>> Virtualization daemon...
>>>>>>>>>>>>>>>>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Started
>>>>>>>>>>>>>>>>>> Virtualization daemon.
>>>>>>>>>>>>>>>>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: libvirt
>>>>>>>>>>>>>>>>>> version: 2.0.0, package: 10.el7_3.5 (CentOS BuildSystem <
>>>>>>>>>>>>>>>>>> http://bugs.centos.org>, 2017-03-03-02:09:45,
>>>>>>>>>>>>>>>>>> c1bm.rdu2.centos.org)
>>>>>>>>>>>>>>>>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]:
>>>>>>>>>>>>>>>>>> hostname: host1.bajada.es
>>>>>>>>>>>>>>>>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: Falló
>>>>>>>>>>>>>>>>>> al conectar con el socket de monitor: No existe el proceso
>>>>>>>>>>>>>>>>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]:
>>>>>>>>>>>>>>>>>> internal error: process exited while connecting to monitor: Could not
>>>>>>>>>>>>>>>>>> access KVM kernel module: Permission denied
>>>>>>>>>>>>>>>>>>                                                  failed
>>>>>>>>>>>>>>>>>> to initialize KVM: Permission denied
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> So the libvirtd is the problem, as i said this is nothing
>>>>>>>>>>>>>>>>>> new to you of course...
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Thanks again for any help
>>>>>>>>>>>>>>>>>> Manuel
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> 2017-03-05 18:51 GMT+00:00 Manuel Luis Aznar <
>>>>>>>>>>>>>>>>>> manuel.luis.aznar at gmail.com>:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Hey there again,
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Can you check if you have KVM modules loaded?
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>     In order to check that I fire up the following
>>>>>>>>>>>>>>>>>>> command: "lsmod | grep kvm"
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>     Result was:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>            kvm_intel              170181  0
>>>>>>>>>>>>>>>>>>>            kvm                     554609  1 kvm_intel
>>>>>>>>>>>>>>>>>>>            irqbypass               13503  1 kvm
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Also check group owner for "/dev/kvm". I fire this: "ls
>>>>>>>>>>>>>>>>>>> -la /dev/kvm". The result was:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>       crw-rw-rw-+ 1 root kvm 10, 232 mar  5 03:35
>>>>>>>>>>>>>>>>>>> /dev/kvm
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Also I check if there were some remain packages pending
>>>>>>>>>>>>>>>>>>> to install for kvm and qemu and I got:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>     yum install \*kvm\*
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> The result is, that the system need to install the
>>>>>>>>>>>>>>>>>>> following:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Instalando:
>>>>>>>>>>>>>>>>>>>  centos-release-qemu-ev        noarch
>>>>>>>>>>>>>>>>>>>  1.0-1.el7                                extras
>>>>>>>>>>>>>>>>>>>    11 k
>>>>>>>>>>>>>>>>>>>  qemu-guest-agent                 x86_64
>>>>>>>>>>>>>>>>>>> 10:2.5.0-3.el7                         base
>>>>>>>>>>>>>>>>>>>  133 k
>>>>>>>>>>>>>>>>>>>  qemu-kvm-ev-debuginfo        x86_64
>>>>>>>>>>>>>>>>>>> 10:2.6.0-28.el7_3.3.1              ovirt-4.0                            12 M
>>>>>>>>>>>>>>>>>>>  vdsm-hook-faqemu               noarch
>>>>>>>>>>>>>>>>>>>  4.18.21-1.el7.centos                ovirt-4.0
>>>>>>>>>>>>>>>>>>>  15 k
>>>>>>>>>>>>>>>>>>>  vdsm-hook-qemucmdline      noarch
>>>>>>>>>>>>>>>>>>>  4.18.21-1.el7.centos                ovirt-4.0
>>>>>>>>>>>>>>>>>>>  11 k
>>>>>>>>>>>>>>>>>>> Instalando para las dependencias:
>>>>>>>>>>>>>>>>>>>  centos-release-virt-common        noarch
>>>>>>>>>>>>>>>>>>> 1-1.el7.centos                                   extras
>>>>>>>>>>>>>>>>>>>          4.5 k
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Checking libvirtd service status I got:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>  libvirtd.service - Virtualization daemon
>>>>>>>>>>>>>>>>>>>    Loaded: loaded (/usr/lib/systemd/system/libvirtd.service;
>>>>>>>>>>>>>>>>>>> enabled; vendor preset: enabled)
>>>>>>>>>>>>>>>>>>>   Drop-In: /etc/systemd/system/libvirtd.service.d
>>>>>>>>>>>>>>>>>>>            ââunlimited-core.conf
>>>>>>>>>>>>>>>>>>>    Active: active (running) since dom 2017-03-05
>>>>>>>>>>>>>>>>>>> 15:56:11 WET; 2h 51min ago
>>>>>>>>>>>>>>>>>>>      Docs: man:libvirtd(8)
>>>>>>>>>>>>>>>>>>>            http://libvirt.org
>>>>>>>>>>>>>>>>>>>  Main PID: 19415 (libvirtd)
>>>>>>>>>>>>>>>>>>>    CGroup: /system.slice/libvirtd.service
>>>>>>>>>>>>>>>>>>>            19415 /usr/sbin/libvirtd --listen
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> mar 05 15:56:10 host1.bajada.es systemd[1]: Starting
>>>>>>>>>>>>>>>>>>> Virtualization daemon...
>>>>>>>>>>>>>>>>>>> mar 05 15:56:11 host1.bajada.es systemd[1]: Started
>>>>>>>>>>>>>>>>>>> Virtualization daemon.
>>>>>>>>>>>>>>>>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]:
>>>>>>>>>>>>>>>>>>> libvirt version: 2.0.0, package: 10.el7_3.5 (CentOS BuildSystem <
>>>>>>>>>>>>>>>>>>> http://bugs.centos.org>, 2017-03-03-02:09:45,
>>>>>>>>>>>>>>>>>>> c1bm.rdu2.centos.org)
>>>>>>>>>>>>>>>>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]:
>>>>>>>>>>>>>>>>>>> hostname: host1.bajada.es
>>>>>>>>>>>>>>>>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]: Failed
>>>>>>>>>>>>>>>>>>> to connect to the socket monitor: process does not exits
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>                (Fallo al conectar con el socket de monitor: No existe el
>>>>>>>>>>>>>>>>>>> proceso)
>>>>>>>>>>>>>>>>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]:
>>>>>>>>>>>>>>>>>>> internal error: process exited while connecting to monitor: Could not
>>>>>>>>>>>>>>>>>>> access KVM kernel module: Permission denied
>>>>>>>>>>>>>>>>>>>                                                  failed
>>>>>>>>>>>>>>>>>>> to initialize KVM: Permission denied
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Thanks for all in advance
>>>>>>>>>>>>>>>>>>> I will be waiting for you. Any help appreciated
>>>>>>>>>>>>>>>>>>> Manuel
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> 2017-03-05 17:33 GMT+00:00 Artyom Lukianov <
>>>>>>>>>>>>>>>>>>> alukiano at redhat.com>:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> I found this one under the vdsm log:
>>>>>>>>>>>>>>>>>>>> libvirtError: internal error: process exited while
>>>>>>>>>>>>>>>>>>>> connecting to monitor: Could not access KVM kernel module: Permission denied
>>>>>>>>>>>>>>>>>>>> failed to initialize KVM: Permission denied
>>>>>>>>>>>>>>>>>>>> Thread-70::INFO::2017-03-05
>>>>>>>>>>>>>>>>>>>> 16:00:04,325::vm::1330::virt.vm::(setDownStatus)
>>>>>>>>>>>>>>>>>>>> vmId=`ed786811-0321-431e-be4b-2d03764c1b02`::Changed
>>>>>>>>>>>>>>>>>>>> state to Down: internal error: process exited while connecting to monitor:
>>>>>>>>>>>>>>>>>>>> Could not access KVM kernel module: Permission denied
>>>>>>>>>>>>>>>>>>>> failed to initialize KVM: Permission denied (code=1)
>>>>>>>>>>>>>>>>>>>> Thread-70::INFO::2017-03-05
>>>>>>>>>>>>>>>>>>>> 16:00:04,325::guestagent::430::virt.vm::(stop)
>>>>>>>>>>>>>>>>>>>> vmId=`ed786811-0321-431e-be4b-2d03764c1b02`::Stopping
>>>>>>>>>>>>>>>>>>>> connection
>>>>>>>>>>>>>>>>>>>> Thread-70::DEBUG::2017-03-05
>>>>>>>>>>>>>>>>>>>> 16:00:04,325::vmchannels::238::vds::(unregister)
>>>>>>>>>>>>>>>>>>>> Delete fileno 52 from listener.
>>>>>>>>>>>>>>>>>>>> Thread-70::DEBUG::2017-03-05
>>>>>>>>>>>>>>>>>>>> 16:00:04,325::vmchannels::66::vds::(_unregister_fd)
>>>>>>>>>>>>>>>>>>>> Failed to unregister FD from epoll (ENOENT): 52
>>>>>>>>>>>>>>>>>>>> Thread-70::DEBUG::2017-03-05
>>>>>>>>>>>>>>>>>>>> 16:00:04,326::__init__::209::jsonrpc.Notification::(emit)
>>>>>>>>>>>>>>>>>>>> Sending event {"params": {"ed786811-0321-431e-be4b-2d03764c1b02":
>>>>>>>>>>>>>>>>>>>> {"status": "Down", "exitReason": 1, "exitMessage": "internal error: process
>>>>>>>>>>>>>>>>>>>> exited while connecting to monitor: Could not access KVM kernel module:
>>>>>>>>>>>>>>>>>>>> Permission denied\nfailed to initialize KVM: Permission denied",
>>>>>>>>>>>>>>>>>>>> "exitCode": 1}, "notify_time": 4339924730}, "jsonrpc": "2.0", "method":
>>>>>>>>>>>>>>>>>>>> "|virt|VM_status|ed786811-0321-431e-be4b-2d03764c1b02"}
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Can you check if you have KVM modules loaded? Also,
>>>>>>>>>>>>>>>>>>>> check group owner for "/dev/kvm".
>>>>>>>>>>>>>>>>>>>> Best Regards
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On Sat, Mar 4, 2017 at 4:24 PM, Manuel Luis Aznar <
>>>>>>>>>>>>>>>>>>>> manuel.luis.aznar at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Hello there again,
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> The error on the first email was using the repo
>>>>>>>>>>>>>>>>>>>>> ovirt-release41.rpm (http://resources.ovirt.org/pu
>>>>>>>>>>>>>>>>>>>>> b/yum-repo/ovirt-release41.rpm), so as I were getting
>>>>>>>>>>>>>>>>>>>>> the same error again and again I am currently trying with
>>>>>>>>>>>>>>>>>>>>> ovirt-release41-snapshot.rpm (
>>>>>>>>>>>>>>>>>>>>> http://resources.ovirt.org/pu
>>>>>>>>>>>>>>>>>>>>> b/yum-repo/ovirt-release41-snapshot.rpm) and the
>>>>>>>>>>>>>>>>>>>>> result is nearly the same.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> After creating the VM on the installation I got the
>>>>>>>>>>>>>>>>>>>>> same error with the command "systemctl status vdsmd":
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> mar 04 14:10:19 host1.bajada.es vdsm[20443]: vdsm
>>>>>>>>>>>>>>>>>>>>> root ERROR failed to retrieve Hosted Engine HA info
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>         Traceback (most recent call last):
>>>>>>>>>>>>>>>>>>>>>            File "/usr/lib/python2.7/site-packages/vdsm/host/api.py",
>>>>>>>>>>>>>>>>>>>>> line 231, in _getHaInfo
>>>>>>>>>>>>>>>>>>>>>               stats = instance.get_all_stats()
>>>>>>>>>>>>>>>>>>>>>            File "/usr/lib/python2.7/site-packa
>>>>>>>>>>>>>>>>>>>>> ges/ovirt_hosted_engine_ha/client/client.py", line
>>>>>>>>>>>>>>>>>>>>> 102, in get_all_stats
>>>>>>>>>>>>>>>>>>>>>               with broker.connection(self._retries,
>>>>>>>>>>>>>>>>>>>>> self._wait):
>>>>>>>>>>>>>>>>>>>>>            File "/usr/lib64/python2.7/contextlib.py",
>>>>>>>>>>>>>>>>>>>>> line 17, in __enter__
>>>>>>>>>>>>>>>>>>>>>               return self.gen.next()
>>>>>>>>>>>>>>>>>>>>>            File "/usr/lib/python2.7/site-packa
>>>>>>>>>>>>>>>>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line
>>>>>>>>>>>>>>>>>>>>> 99, in connection
>>>>>>>>>>>>>>>>>>>>>               self.connect(retries, wait)
>>>>>>>>>>>>>>>>>>>>>            File "/usr/lib/python2.7/site-packa
>>>>>>>>>>>>>>>>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line
>>>>>>>>>>>>>>>>>>>>> 78, in connect
>>>>>>>>>>>>>>>>>>>>>               raise BrokerConnectionError(error_msg)
>>>>>>>>>>>>>>>>>>>>>          BrokerConnectionError: Failed to connect to
>>>>>>>>>>>>>>>>>>>>> broker, the number of errors has exceeded the limit (1)
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> mar 04 14:10:34 host1.bajada.es vdsm[20443]: vdsm
>>>>>>>>>>>>>>>>>>>>> ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink
>>>>>>>>>>>>>>>>>>>>> ERROR Failed to connect to broker, the number of errors has exceeded the
>>>>>>>>>>>>>>>>>>>>> limit (1)
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> I have noticed that the ovirt-ha-agent and
>>>>>>>>>>>>>>>>>>>>> ovirt-ha-broker services was not running. I guess if this have something to
>>>>>>>>>>>>>>>>>>>>> do with the error in vsmd service log.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> But in this case the ovirt-hosted-engine-installation
>>>>>>>>>>>>>>>>>>>>> prints the vnc connection and I can connect to the engine VM.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Thanks for all in advance
>>>>>>>>>>>>>>>>>>>>> Any help would be appreciated
>>>>>>>>>>>>>>>>>>>>> Manuel Luis Aznar
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> 2017-03-03 21:48 GMT+00:00 Manuel Luis Aznar <
>>>>>>>>>>>>>>>>>>>>> manuel.luis.aznar at gmail.com>:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Hello there,
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> I am having some trouble when deploying an oVirt 4.1
>>>>>>>>>>>>>>>>>>>>>> hosted engine installation.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> When I m just to end the installation and the hosted
>>>>>>>>>>>>>>>>>>>>>> engine setup script is about to start the Vm engine (appliance) it fails
>>>>>>>>>>>>>>>>>>>>>> saying "The VM is not powring up".
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> If I double check the service vdsmd i get this error
>>>>>>>>>>>>>>>>>>>>>> all the time:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> vdsm root ERROR failed to retrieve Hosted Engine HA
>>>>>>>>>>>>>>>>>>>>>> info
>>>>>>>>>>>>>>>>>>>>>>  Traceback (most recent call last):
>>>>>>>>>>>>>>>>>>>>>>      File "/usr/lib/python2.7/site-packages/vdsm/host/api.py",
>>>>>>>>>>>>>>>>>>>>>> line 231, in _getHaInfo
>>>>>>>>>>>>>>>>>>>>>>          stats = instance.get_all_stats()
>>>>>>>>>>>>>>>>>>>>>>      File "/usr/lib/python2.7/site-packa
>>>>>>>>>>>>>>>>>>>>>> ges/ovirt_hosted_engine_ha/client/client.py", line
>>>>>>>>>>>>>>>>>>>>>> 102, in get_all_stats
>>>>>>>>>>>>>>>>>>>>>>          with broker.connection(self._retries,
>>>>>>>>>>>>>>>>>>>>>> self._wait):
>>>>>>>>>>>>>>>>>>>>>>      File "/usr/lib64/python2.7/contextlib.py", line
>>>>>>>>>>>>>>>>>>>>>> 17, in __enter__
>>>>>>>>>>>>>>>>>>>>>>          return self.gen.next()
>>>>>>>>>>>>>>>>>>>>>>      File "/usr/lib/python2.7/site-packa
>>>>>>>>>>>>>>>>>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line
>>>>>>>>>>>>>>>>>>>>>> 99, in connection
>>>>>>>>>>>>>>>>>>>>>>          self.connect(retries, wait)
>>>>>>>>>>>>>>>>>>>>>>      File "/usr/lib/python2.7/site-packa
>>>>>>>>>>>>>>>>>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line
>>>>>>>>>>>>>>>>>>>>>> 78, in connect
>>>>>>>>>>>>>>>>>>>>>>          raise BrokerConnectionError(error_msg)
>>>>>>>>>>>>>>>>>>>>>> BrokerConnectionError: Failed to connect to broker,
>>>>>>>>>>>>>>>>>>>>>> the number of errors has exceeded the limit (1)
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Did anyone have experimented the same problem?¿? Any
>>>>>>>>>>>>>>>>>>>>>> hint on How to solved it?¿? I have tried several times with clean
>>>>>>>>>>>>>>>>>>>>>> installations and always getting the same...
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> The host where I am trying to do the installation
>>>>>>>>>>>>>>>>>>>>>> have CentOS 7...
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Thanks for all in advance
>>>>>>>>>>>>>>>>>>>>>> Will be waiting for any hint to see what I am doing
>>>>>>>>>>>>>>>>>>>>>> wrong...
>>>>>>>>>>>>>>>>>>>>>> Manuel Luis Aznar
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>> Users mailing list
>>>>>>>>>>>>>>>>>>>>> Users at ovirt.org
>>>>>>>>>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>> Users mailing list
>>>>>>>>>>>>>>>>> Users at ovirt.org
>>>>>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20170512/bfa6eb65/attachment-0001.html>


More information about the Users mailing list