[ovirt-users] Problem to login virtengine on remote browser

[Stephen Liu]

 > What do you mean by that? What error message do you get?
> Can you ssh from the engine machine to this address manually?
> If not, first solve this, then try again to add it.
> Perhaps it's the firewall blocking or something like that.

Status - Install Failed
Nov 9, 2017 7:01:44 PM
Host ovirtnode.example.com installation failed. Command returned failure code 1 during SSH session 'root at 192.168.8.5'.

Nov 9, 2017 7:01:43 PM
Failed to install Host ovirtnode.example.com. Failed to execute stage 'Setup validation': Hardware does not support virtualization.

Nov 9, 2017 7:01:43 PM
Host ovirtnode.example.com installation in progress . Machine does not support constant timestamp counter, this may effect performance.


On Host Terminal:
$ ssh root at 192.168.8.5 (ovirt node IP)
The authenticity of host '192.168.8.5 (192.168.8.5)' can't be established.
ECDSA key fingerprint is SHA256:J2gMI1fvZj5dNC36YClUjAGHQrnszQ23y46xjNcJnYw.
Are you sure you want to continue connecting (yes/no)? 

Whether I have to proceed here first, connecting "ovirt note"?

$ egrep -c '(vmx|svm)' /proc/cpuinfo
8

$ uname -m
x86_64
$ kvm-ok
INFO: /dev/kvm existsKVM acceleration can be used

RegardsSL





    On Thursday, November 9, 2017, 11:18:06 PM GMT+8, Yedidyah Bar David <didi at redhat.com> wrote:  
 
 On Thu, Nov 9, 2017 at 5:03 PM, Stephen Liu <satimis at yahoo.com> wrote:
>>> if running;
>>> 192.168.8.8 (IP of vm1)
>>> I can connect 'oVirt Open Virtualization Manager' but I can't login with
>>> following warning:
>>>'The client is not authorized to request an authorization. It's required
>>> to
>>>access the system using FQDN.'
>
>> Indeed, see the other thread.
>
>> If this isn't enough, please provide more details - the name you provided
>> as engine FQDN during engine-setup, whether you fixed name resolution -
>> by updating the dns or the hosts file, etc.
>
> Hi,
>
> I solved the problem with following steps:-
>
> # nano /etc/ovirt-engine/engine.conf.d/11-setup-sso.conf
>
> Change:
> SSO_ALTERNATE_ENGINE_FQDNS=""
> To:
> SSO_ALTERNATE_ENGINE_FQDNS="192.168.8.8" (ovirtengine IP)
>
> # systemctl restart ovirt-engine.service
>
> Now I can remote login ovirtengine on Host's browser running:
> http://ovirtengine.example.com
>
> On ovirtengine
> $ cat /etc/hosts
> 127.0.0.1  localhost localhost.localdomain localhost4
> localhost4.localdomain4
> ::1        localhost localhost.localdomain localhost6
> localhost6.localdomain6
>
> 192.168.8.8  ovirtengine.example.com
> 192.168.8.5  ovirtnode.example.com
> [/end]
>
> Now I encounter another problem in "Add oVirt Node (ovirtnode.example) to
> ovirt engine from Web Administrator Portal", failure to add new host "ovirt
> node".
>
> To connect/login "ovirt node" on Host I must run;
> 192.168.8.5:9090
>
> Adding 192.168.8.5 to the new host, "ovirt node" can't be connected.

What do you mean by that? What error message do you get?
Can you ssh from the engine machine to this address manually?
If not, first solve this, then try again to add it.
Perhaps it's the firewall blocking or something like that.

>  But
> I'm not allowed adding "192.168.8.5:9090" to Address there.
>
> Please advise is there any solution to delete ":9090"?
>
> Thanks
>
> Regards
> SL
>
>
> On Thursday, November 9, 2017, 8:34:30 PM GMT+8, Yedidyah Bar David
> <didi at redhat.com> wrote:
>
>
> On Thu, Nov 9, 2017 at 1:57 PM, Stephen Liu <satimis at yahoo.com> wrote:
>> Hi all,
>>
>> Problem to login virtengine on remote browser
>> client is not authorized to request an authorization
>
> Please check recent thread on this list, with subject "[ovirt-users]
> engine FQDN".
>
>>
>> vm1 - ovirtengine on CentOS 7, Gnome desktop (internal IP 192.168.8.8)
>> vm2 - ovirt node on CentOS 7, minimal (internal IP 192.168.8.5)
>> Host - Ubuntu 16.04 Gnome desktop
>> KVM
>>
>> vm1
>> ===
>> on Firefox running;
>> ovirtengine.example.com
>> I can login 'oVirt Open Virtualization Manager'
>>
>> on Firefox running;
>> 192.168.8.5:9090 (ovirt node IP)
>> I can login ovirt node as root
>>
>> Host
>> ====
>> on Firefox running;
>> ovirtengine.example.com
>> Server not found
>> (Firewall of vm1 already stopped running;
>> # systemctl stop firewalld )
>
> "Server not found" is usually unrelated to the firewall, but is a result
> of bad/missing name resolution.
>
>>
>> if running;
>> 192.168.8.8 (IP of vm1)
>> I can connect 'oVirt Open Virtualization Manager' but I can't login with
>> following warning:
>> 'The client is not authorized to request an authorization. It's required
>> to
>> access the system using FQDN.'
>
> Indeed, see the other thread.
>
> If this isn't enough, please provide more details - the name you provided
> as engine FQDN during engine-setup, whether you fixed name resolution -
> by updating the dns or the hosts file, etc.
>
> Regards,
>
>
>>
>> on Firefox running;
>> 192.168.8.5:9090  (ovirt node IP)
>> I can login ovirt node as root
>>
>>
>> Please help.  Thanks in advice.
>>
>>
>> Regards
>> SL
>
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
>
>
> --
> Didi
>



-- 
Didi
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20171109/4c9c603c/attachment.html>