[ovirt-users] how to move network bridge?

[Petr Horacek]

Manual change of ifcfg files and restart of network service (not reboot)
should restore connectivity. Then you should be able to access Engine and
setup the new network there so it will be persisted and recognized by oVirt.

Glad you managed to run it.

2017-11-15 13:45 GMT+02:00 Rudi Ahlers <rudiahlers at gmail.com>:

> Hi Petr,
>
> Thanx for getting back to me.
>
> I ended up reinstalling the server. Even after I manually edited the
> ifcg-ens2f0 and ens2f3 files, and rebooted, networking didn't work well.
> The gateway was never added (even though it was listed in the files) and
> the /etc/resolv.conf file kept on being overwritten despite NetworkManager
> being off.
>
> On Wed, Nov 15, 2017 at 1:41 PM, Petr Horacek <phoracek at redhat.com> wrote:
>
>> Hello,
>>
>> could you please share your current configuration from
>> /etc/sysconfig/network-scripts/ifcfg-{ovirtmgmt,DESIRED_
>> STORAGE_IFACE,DESIRED_MGMT_IFACE}?
>>
>> Thanks,
>> Petr
>>
>> 2017-11-14 23:56 GMT+02:00 Rudi Ahlers <rudiahlers at gmail.com>:
>>
>>> Hi,
>>>
>>> Can someone please help me "move" the network bridge to another port? I
>>> have tried a couple times but it doesn't seem to work.
>>> Our internal LAN IP range is 192.168.102.0/24 and the storage area
>>> network is 10.10.10.0/24
>>>
>>> When I installed hosted-engine, I accidently told it to use the
>>> 10.10.10.81 interface and a  bridge was created accordingly. But I cannot
>>> access the 10.10.10.0/24 IP range via our VPN (for security reasons) so
>>> I can't access the hosted-engine
>>>
>>> I tried to remove the bridge interface with brctl but it didn't work as
>>> expected.
>>>
>>> root at virt1 ~]# brctl show
>>> bridge name     bridge id               STP enabled     interfaces
>>> ;vdsmdummy;             8000.000000000000       no
>>> ovirtmgmt               8000.0cc47aeaffd8       no              ens2f0
>>>
>>>
>>> Even though I tried to remove ens2f0 and added ens2f3, it never worked.
>>> The bridge / network would stop working and I wold need to login to the
>>> server's IPMI card and remove ens2f0.
>>>
>>> Can someone please guide me in moving the bridge to the 192.168.102.0/24
>>> network?
>>>
>>>
>>>
>>> --
>>> Kind Regards
>>> Rudi Ahlers
>>> Website: http://www.rudiahlers.co.za
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>>
>>
>
>
> --
> Kind Regards
> Rudi Ahlers
> Website: http://www.rudiahlers.co.za
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20171115/7cd94d19/attachment.html>