From cryptic5000 at hotmail.com Sun Apr 1 08:02:12 2018 From: cryptic5000 at hotmail.com (Cryptic) Date: Sun, 1 Apr 2018 08:02:12 +0000 Subject: [ovirt-users] Fw: Data Operations On Any Host In-Reply-To: References: Message-ID: Hi to all, In relation to the changes made to distribute data operations between all the hosts in a data center rather than burden the SPM. I am very new to oVirt and am having troubles finding information on this and need assistance to prevent this happening on my development oVirt 4.2 system. The issue I have is that I have a cluster which hosts all the storage volumes using gluster and they have 10G NICs. I also have a separate cluster which is virtualisation only and each host only has 3 x 1G aggregated NICs. When I perform disk moves between storage domains it often uses one of the virtualisation hosts which drastically increases the time taken to move the disk. Can I restrict these types of operations to a set of hosts or turn it off altogether so that it just uses the SPM like it used to in the past. Distributing it is a great feature but unfortunately is no good in my current setup. Regards, Jeremy -------------- next part -------------- An HTML attachment was scrubbed... URL: From ahadas at redhat.com Sun Apr 1 09:43:48 2018 From: ahadas at redhat.com (Arik Hadas) Date: Sun, 1 Apr 2018 12:43:48 +0300 Subject: [ovirt-users] Issue adding network interface to VM failed with HotPlugNicVDS In-Reply-To: <9D829BFC-E203-47DF-B15A-6777CC169E01@hs-bremen.de> References: <9D829BFC-E203-47DF-B15A-6777CC169E01@hs-bremen.de> Message-ID: On Fri, Mar 30, 2018 at 10:06 PM, Oliver Riesener < Oliver.Riesener at hs-bremen.de> wrote: > Hi, > > running ovirt 4.2.2-6 with firewalld enabled. > > Failed to HotPlugNicVDS, error = The name org.fedoraproject.FirewallD1 was > not provided by any .service files, code = 49 > I have seen this error when trying to run a VM after starting/stoping firewalld without restarting libvirtd. Try restarting libvirtd. > > Can?t hot plug any new network interfaces. > > 30d6c2ab', vmId='20abce62-a558-4aee-b3e3-3fa70f1d1918'}', > device='bridge', type='INTERFACE', specParams='[inbound={}, outbound={}]', > address='', managed='true', plugged='true', readOnly='false', > deviceAlias='', customProperties='[]', snapshotId='null', > logicalName='null', hostDevice='null'}'})' execution failed: > VDSGenericException: VDSErrorException: Failed to HotPlugNicVDS, error = > The name org.fedoraproject.FirewallD1 was not provided by any .service > files, code = 49 > 2018-03-30 20:56:08,620+02 INFO [org.ovirt.engine.core. > vdsbroker.vdsbroker.HotPlugNicVDSCommand] (default task-106) [e732710] > FINISH, HotPlugNicVDSCommand, log id: 210cb07 > 2018-03-30 20:56:08,620+02 ERROR [org.ovirt.engine.core.bll.network.vm. > ActivateDeactivateVmNicCommand] (default task-106) [e732710] Command > 'org.ovirt.engine.core.bll.network.vm.ActivateDeactivateVmNicCommand' > failed: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: > VDSGenericException: VDSErrorException: Failed to HotPlugNicVDS, error = > The name org.fedoraproject.FirewallD1 was not provided by any .service > files, code = 49 (Failed with error ACTIVATE_NIC_FAILED and code 49) > 2018-03-30 20:56:08,627+02 ERROR [org.ovirt.engine.core.dal. > dbbroker.auditloghandling.AuditLogDirector] (default task-106) [e732710] > EVENT_ID: NETWORK_ACTIVATE_VM_INTERFACE_FAILURE(1,013), Failed to plug > Network Interface nic3 (VirtIO) to VM v-srv-opt. (User: admin at internal) > 2018-03-30 20:56:08,629+02 INFO [org.ovirt.engine.core.bll.CommandCompensator] > (default task-106) [e732710] Command [id=0db21508-1eeb-40f5-912e-58af9bb3fa9b]: > Compensating NEW_ENTITY_ID of org.ovirt.engine.core.common.businessentities.VmDevice; > snapshot: VmDeviceId:{deviceId='6d7a5b68-0eb3-4531-bc06-3aff30d6c2ab', > vmId='20abce62-a558-4aee-b3e3-3fa70f1d1918'}. > 2018-03-30 20:56:08,630+02 INFO [org.ovirt.engine.core.bll.CommandCompensator] > (default task-106) [e732710] Command [id=0db21508-1eeb-40f5-912e-58af9bb3fa9b]: > Compensating NEW_ENTITY_ID of org.ovirt.engine.core.common. > businessentities.network.VmNetworkStatistics; snapshot: > 6d7a5b68-0eb3-4531-bc06-3aff30d6c2ab. > 2018-03-30 20:56:08,631+02 INFO [org.ovirt.engine.core.bll.CommandCompensator] > (default task-106) [e732710] Command [id=0db21508-1eeb-40f5-912e-58af9bb3fa9b]: > Compensating NEW_ENTITY_ID of org.ovirt.engine.core.common. > businessentities.network.VmNetworkInterface; snapshot: > 6d7a5b68-0eb3-4531-bc06-3aff30d6c2ab. > 2018-03-30 20:56:08,638+02 INFO [org.ovirt.engine.core.bll.CommandCompensator] > (default task-106) [e732710] Command [id=0db21508-1eeb-40f5-912e-58af9bb3fa9b]: > Compensating DELETED_OR_UPDATED_ENTITY of org.ovirt.engine.core.common.businessentities.VmStatic; > snapshot: id=20abce62-a558-4aee-b3e3-3fa70f1d1918. > 2018-03-30 20:56:08,642+02 INFO [org.ovirt.engine.core.bll.CommandCompensator] > (default task-106) [e732710] Command [id=0db21508-1eeb-40f5-912e-58af9bb3fa9b]: > Compensating TRANSIENT_ENTITY of org.ovirt.engine.core.common. > businessentities.ReleaseMacsTransientCompensation; snapshot: > org.ovirt.engine.core.common.businessentities. > ReleaseMacsTransientCompensation at 581c941c. > 2018-03-30 20:56:08,720+02 ERROR [org.ovirt.engine.core.dal. > dbbroker.auditloghandling.AuditLogDirector] (default task-106) [e732710] > EVENT_ID: NETWORK_ADD_VM_INTERFACE_FAILED(933), Failed to add Interface > nic3 (VirtIO) to VM v-srv-opt. (User: admin at internal) > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From rightkicktech at gmail.com Sun Apr 1 18:04:13 2018 From: rightkicktech at gmail.com (Alex K) Date: Sun, 1 Apr 2018 21:04:13 +0300 Subject: [ovirt-users] ovirt snapshot issue In-Reply-To: References: Message-ID: Checking further the logs I see this error given from libvirt of the host that has the guest VM running: Apr 1 17:53:41 v0 libvirtd: 2018-04-01 17:53:41.298+0000: 1862: warning : qemuDomainObjBeginJobInternal:3847 : Cannot start job (query, none) for domain Data-Server; current job is (async nested, snapshot) owned by (1863 remoteDispatchDomainSnapshotCreateXML, 1863 remoteDispatchDomainSnapshotCreateXML) for (39s, 41s) Apr 1 17:53:41 v0 libvirtd: 2018-04-01 17:53:41.299+0000: 1862: error : qemuDomainObjBeginJobInternal:3859 : Timed out during operation: cannot acquire state change lock (held by remoteDispatchDomainSnapshotCreateXML) Apr 1 17:53:57 v0 journal: vdsm Executor WARN Worker blocked: timeout=60, duration=60 at 0x3bf8050> task#=416 at 0x20d7f90> Immediately after above the engine reports the VM as unresponsive. The SPM host does not log any issues. In the same time, the 3 hosts are fairly idle with only one running guest VM. The gluster traffic is dedicated to a separate Gbit NIC of the servers (dedicated VLAN) while the management network is on a separate network. The gluster traffic does not exceed 40 Mbps during the snapshot operation. Can't understand why libvirt is logging timeout. Alex On Thu, Mar 29, 2018 at 9:42 PM, Alex K wrote: > Any idea with this issue? > I am still trying to understand what may be causing this issue. > > Many thanx for any assistance. > > Alex > > On Wed, Mar 28, 2018 at 10:06 AM, Yedidyah Bar David > wrote: > >> On Tue, Mar 27, 2018 at 3:38 PM, Sandro Bonazzola >> wrote: >> >>> >>> >>> 2018-03-27 14:34 GMT+02:00 Alex K : >>> >>>> Hi All, >>>> >>>> Any idea on the below? >>>> >>>> I am using oVirt Guest Tools 4.2-1.el7.centos for the VM. >>>> The Window 2016 server VM (which it the one with the relatively big >>>> disks: 500 GB) it is consistently rendered unresponsive when trying to get >>>> a snapshot. >>>> I amy provide any other additional logs if needed. >>>> >>> >>> Adding some people to the thread >>> >> >> Adding more people for this part. >> >> >>> >>> >>> >>>> >>>> Alex >>>> >>>> On Sun, Mar 25, 2018 at 7:30 PM, Alex K >>>> wrote: >>>> >>>>> Hi folks, >>>>> >>>>> I am facing frequently the following issue: >>>>> >>>>> On some large VMs (Windows 2016 with two disk drives, 60GB and 500GB) >>>>> when attempting to create a snapshot of the VM, the VM becomes >>>>> unresponsive. >>>>> >>>>> The errors that I managed to collect were: >>>>> >>>>> vdsm error at host hosting the VM: >>>>> 2018-03-25 14:40:13,442+0000 WARN (vdsm.Scheduler) [Executor] Worker >>>>> blocked: >>>> {u'frozen': False, u'vmID': u'a5c761a2-41cd-40c2-b65f-f3819293e8a4', >>>>> u'snapDrives': [{u'baseVolumeID': u'2a33e585-ece8-4f4d-b45d-5ecc9239200e', >>>>> u'domainID': u'888e3aae-f49f-42f7-a7fa-76700befabea', u'volumeID': >>>>> u'e9a01ebd-83dd-40c3-8c83-5302b0d15e04', u'imageID': >>>>> u'c75b8e93-3067-4472-bf24-dafada224e4d'}, {u'baseVolumeID': >>>>> u'3fb2278c-1b0d-4677-a529-99084e4b08af', u'domainID': >>>>> u'888e3aae-f49f-42f7-a7fa-76700befabea', u'volumeID': >>>>> u'78e6b6b1-2406-4393-8d92-831a6d4f1337', u'imageID': >>>>> u'd4223744-bf5d-427b-bec2-f14b9bc2ef81'}]}, 'jsonrpc': '2.0', >>>>> 'method': u'VM.snapshot', 'id': u'89555c87-9701-4260-9952-789965261e65'} >>>>> at 0x7fca4004cc90> timeout=60, duration=60 at 0x39d8210> task#=155842 at >>>>> 0x2240e10> (executor:351) >>>>> 2018-03-25 14:40:15,261+0000 INFO (jsonrpc/3) [jsonrpc.JsonRpcServer] >>>>> RPC call VM.getStats failed (error 1) in 0.01 seconds (__init__:539) >>>>> 2018-03-25 14:40:17,471+0000 WARN (jsonrpc/5) [virt.vm] >>>>> (vmId='a5c761a2-41cd-40c2-b65f-f3819293e8a4') monitor became >>>>> unresponsive (command timeout, age=67.9100000001) (vm:5132) >>>>> >>>>> engine.log: >>>>> 2018-03-25 14:40:19,875Z WARN [org.ovirt.engine.core.dal.dbb >>>>> roker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler2) >>>>> [1d737df7] EVENT_ID: VM_NOT_RESPONDING(126), Correlation ID: null, Call >>>>> Stack: null, Custom ID: null, Custom Event ID: -1, Message: VM Data-Server >>>>> is not responding. >>>>> >>>>> 2018-03-25 14:42:13,708Z ERROR [org.ovirt.engine.core.dal.dbb >>>>> roker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler5) >>>>> [17789048-009a-454b-b8ad-2c72c7cd37aa] EVENT_ID: >>>>> VDS_BROKER_COMMAND_FAILURE(10,802), Correlation ID: null, Call Stack: >>>>> null, Custom ID: null, Custom Event ID: -1, Message: VDSM v1.cluster >>>>> command SnapshotVDS failed: Message timeout which can be caused by >>>>> communication issues >>>>> 2018-03-25 14:42:13,708Z ERROR [org.ovirt.engine.core.vdsbrok >>>>> er.vdsbroker.SnapshotVDSCommand] (DefaultQuartzScheduler5) >>>>> [17789048-009a-454b-b8ad-2c72c7cd37aa] Command >>>>> 'SnapshotVDSCommand(HostName = v1.cluster, SnapshotVDSCommandParameters:{runAsync='true', >>>>> hostId='a713d988-ee03-4ff0-a0cd-dc4cde1507f4', >>>>> vmId='a5c761a2-41cd-40c2-b65f-f3819293e8a4'})' execution failed: >>>>> VDSGenericException: VDSNetworkException: Message timeout which can be >>>>> caused by communication issues >>>>> 2018-03-25 14:42:13,708Z WARN [org.ovirt.engine.core.bll.sna >>>>> pshots.CreateAllSnapshotsFromVmCommand] (DefaultQuartzScheduler5) >>>>> [17789048-009a-454b-b8ad-2c72c7cd37aa] Could not perform live >>>>> snapshot due to error, VM will still be configured to the new created >>>>> snapshot: EngineException: org.ovirt.engine.core.vdsbroke >>>>> r.vdsbroker.VDSNetworkException: VDSGenericException: >>>>> VDSNetworkException: Message timeout which can be caused by communication >>>>> issues (Failed with error VDS_NETWORK_ERROR and code 5022) >>>>> 2018-03-25 14:42:13,708Z WARN [org.ovirt.engine.core.vdsbroker.VdsManager] >>>>> (org.ovirt.thread.pool-6-thread-15) [17789048-009a-454b-b8ad-2c72c7cd37aa] >>>>> Host 'v1.cluster' is not responding. It will stay in Connecting state for a >>>>> grace period of 61 seconds and after that an attempt to fence the host will >>>>> be issued. >>>>> 2018-03-25 14:42:13,725Z WARN [org.ovirt.engine.core.dal.dbb >>>>> roker.auditloghandling.AuditLogDirector] >>>>> (org.ovirt.thread.pool-6-thread-15) [17789048-009a-454b-b8ad-2c72c7cd37aa] >>>>> EVENT_ID: VDS_HOST_NOT_RESPONDING_CONNECTING(9,008), Correlation ID: >>>>> null, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: Host >>>>> v1.cluster is not responding. It will stay in Connecting state for a grace >>>>> period of 61 seconds and after that an attempt to fence the host will be >>>>> issued. >>>>> 2018-03-25 14:42:13,751Z WARN [org.ovirt.engine.core.dal.dbb >>>>> roker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler5) >>>>> [17789048-009a-454b-b8ad-2c72c7cd37aa] EVENT_ID: >>>>> USER_CREATE_LIVE_SNAPSHOT_FINISHED_FAILURE(170), Correlation ID: >>>>> 17789048-009a-454b-b8ad-2c72c7cd37aa, Job ID: >>>>> 16e48c28-a8c7-4841-bd81-1f2d370f345d, Call Stack: >>>>> org.ovirt.engine.core.common.errors.EngineException: EngineException: >>>>> org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: >>>>> VDSGenericException: VDSNetworkException: Message timeout which can be >>>>> caused by communication issues (Failed with error VDS_NETWORK_ERROR and >>>>> code 5022) >>>>> 2018-03-25 14:42:14,372Z ERROR [org.ovirt.engine.core.dal.dbb >>>>> roker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler5) [] >>>>> EVENT_ID: USER_CREATE_SNAPSHOT_FINISHED_FAILURE(69), Correlation ID: >>>>> 17789048-009a-454b-b8ad-2c72c7cd37aa, Job ID: >>>>> 16e48c28-a8c7-4841-bd81-1f2d370f345d, Call Stack: >>>>> org.ovirt.engine.core.common.errors.EngineException: EngineException: >>>>> org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: >>>>> VDSGenericException: VDSNetworkException: Message timeout which can be >>>>> caused by communication issues (Failed with error VDS_NETWORK_ERROR and >>>>> code 5022) >>>>> 2018-03-25 14:42:14,372Z WARN [org.ovirt.engine.core.bll.Con >>>>> currentChildCommandsExecutionCallback] (DefaultQuartzScheduler5) [] >>>>> Command 'CreateAllSnapshotsFromVm' id: 'bad4f5be-5306-413f-a86a-513b3cfd3c66' >>>>> end method execution failed, as the command isn't marked for endAction() >>>>> retries silently ignoring >>>>> 2018-03-25 14:42:15,951Z WARN [org.ovirt.engine.core.dal.dbb >>>>> roker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler5) >>>>> [5017c163] EVENT_ID: VDS_NO_SELINUX_ENFORCEMENT(25), Correlation ID: >>>>> null, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: Host >>>>> v1.cluster does not enforce SELinux. Current status: DISABLED >>>>> 2018-03-25 14:42:15,951Z WARN [org.ovirt.engine.core.vdsbroker.VdsManager] >>>>> (DefaultQuartzScheduler5) [5017c163] Host 'v1.cluster' is running with >>>>> SELinux in 'DISABLED' mode >>>>> >>>>> As soon as the VM is unresponsive, the VM console that was already >>>>> open freezes. I can resume the VM only by powering off and on. >>>>> >>>>> I am using ovirt 4.1.9 with 3 nodes and self-hosted engine. I am >>>>> running mostly Windows 10 and Windows 2016 server VMs. I have installed >>>>> latest guest agents from: >>>>> >>>>> http://resources.ovirt.org/pub/ovirt-4.2/iso/oVirt-toolsSetu >>>>> p/4.2-1.el7.centos/ >>>>> >>>>> At the screen where one takes a snapshot I get a warning saying "Could >>>>> not detect guest agent on the VM. Note that without guest agent the data on >>>>> the created snapshot may be inconsistent". See attached. I have verified >>>>> that ovirt guest tools are installed and shown at installed apps at engine >>>>> GUI. Also Ovirt Guest Agent (32 bit) and qemu-ga are listed as running at >>>>> the windows tasks manager. Shouldn't ovirt guest agent be 64 bit on Windows >>>>> 64 bit? >>>>> >>>> >> No idea, but I do not think it's related to your problem of freezing >> while taking a snapshot. >> >> This error was already discussed in the past, see e.g.: >> >> http://lists.ovirt.org/pipermail/users/2017-June/082577.html >> >> Best regards, >> -- >> Didi >> > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From duke at dukey.org Sun Apr 1 19:24:57 2018 From: duke at dukey.org (Rob Dueckman) Date: Sun, 01 Apr 2018 15:24:57 -0400 Subject: [ovirt-users] oVirt System Test Hackathon Message-ID: <20180401152457.Horde.DUJAG5GadeZEl04ImLgjtXE@dukey.org> oVirt System Test Hackathon (on 13/03/18 at 00:00:00) Location: #ovirt IRC channel Attendees: sbonazzo at redhat.com, devel at ovirt.org, users at ovirt.org, duke at dukey.org The following is a more detailed description of the event: Please join us in an ovirt-system-tests hackathon pushing new tests and improving existing ones for testing Hosted Engine.

Git repo is available: https://gerrit.ovirt.org/gitweb?p=ovirt-system-tests.git;a=summary

Integration, Node and CI team will be available for helping in the effort and reviewing patches.

Here's a public trello board tracking the efforts: https://trello.com/b/Pp76YoRL -::~:~::~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~::~:~::- Please do not edit this section of the description. View your event at https://www.google.com/calendar/event?action=VIEW&eid=MDhuZTY5bXRxbGo0cnNmMzIzMzEyMjYwZnEgdXNlcnNAb3ZpcnQub3Jn&tok=MTkjc2JvbmF6em9AcmVkaGF0LmNvbTM0ZGExOGE3NjYwMTM2Y2NlN2E3OTY2NTQ4NWEzZjA4ZWM4NGU4Mjk&ctz=Europe/Rome&hl=en. -::~:~::~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~::~:~::- Attached is an iCalendar file with more information about the event. If your mail client supports iTip requests you can use this file to easily update your local copy of the event. If your email client doesn't support iTip requests you can use one of the following links to accept or decline the event. To accept the event: https://dukey.org/horde/kronolith/attend.php?c=SBtgm5Eqafgr6UW2av7iGg1&e=llLDTFIRQGC9-2Qb3VkZuhz&u=users%40ovirt.org&a=accept To accept the event tentatively: https://dukey.org/horde/kronolith/attend.php?c=SBtgm5Eqafgr6UW2av7iGg1&e=llLDTFIRQGC9-2Qb3VkZuhz&u=users%40ovirt.org&a=tentative To decline the event: https://dukey.org/horde/kronolith/attend.php?c=SBtgm5Eqafgr6UW2av7iGg1&e=llLDTFIRQGC9-2Qb3VkZuhz&u=users%40ovirt.org&a=decline -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/png Size: 2475 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: event-invitation.ics Type: text/calendar Size: 2264 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: event-invitation.ics Type: application/ics Size: 2317 bytes Desc: not available URL: From ena at redhat.com Mon Apr 2 06:50:26 2018 From: ena at redhat.com (Emil Natan) Date: Mon, 2 Apr 2018 09:50:26 +0300 Subject: [ovirt-users] oVirt System Test Hackathon In-Reply-To: <20180401152457.Horde.DUJAG5GadeZEl04ImLgjtXE@dukey.org> References: <20180401152457.Horde.DUJAG5GadeZEl04ImLgjtXE@dukey.org> Message-ID: 13/04/18 maybe? On Sun, Apr 1, 2018 at 10:24 PM, Rob Dueckman wrote: > *Rob Dueckman wishes to make you aware of "oVirt System Test Hackathon".* > *oVirt System Test Hackathon* > *Start:* *13/03/18 00:00:00* > *End:* *14/03/18 00:00:00* > *Location:* *#ovirt IRC channel* > *Attendees:* > > > > * sbonazzo at redhat.com devel at ovirt.org > users at ovirt.org duke at dukey.org > * > *Description:* > > > > > > *Please join us in an ovirt-system-tests hackathon pushing new tests and > improving existing ones for testing Hosted Engine.

Git repo is > available: href="https://www.google.com/url?q=https%3A%2F%2Fgerrit.ovirt.org%2Fgitweb%3Fp%3Dovirt-system-tests.git%3Ba%3Dsummary&sa=D&ust=1520522907926000&usg=AFQjCNHiWd7myztG_ebonGlsjNat279l_Q > " > target="_blank">https://gerrit.ovirt.org/gitweb?p=ovirt-system-tests.git;a=summary >

Integration, > Node and CI team will be available for helping in the effort and reviewing > patches.

Here's a public trello board tracking the efforts:  href="https://trello.com/b/Pp76YoRL > ">https://trello.com/b/Pp76YoRL > > -::~:~::~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~::~:~::- > Please do not edit this section of the description. View your event at > https://www.google.com/calendar/event?action=VIEW&eid=MDhuZTY5bXRxbGo0cnNmMzIzMzEyMjYwZnEgdXNlcnNAb3ZpcnQub3Jn&tok=MTkjc2JvbmF6em9AcmVkaGF0LmNvbTM0ZGExOGE3NjYwMTM2Y2NlN2E3OTY2NTQ4NWEzZjA4ZWM4NGU4Mjk&ctz=Europe/Rome&hl=en > . > -::~:~::~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~::~:~::-* > > Attached is an iCalendar file with more information about the event. If > your mail client supports iTip requests you can use this file to easily > update your local copy of the event. > > If your email client doesn't support iTip requests you can use the > following links to: *accept > *, > *accept tentatively > * > or *decline > * > the event. > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -- Emil -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/png Size: 2475 bytes Desc: not available URL: From didi at redhat.com Mon Apr 2 07:03:35 2018 From: didi at redhat.com (Yedidyah Bar David) Date: Mon, 2 Apr 2018 10:03:35 +0300 Subject: [ovirt-users] oVirt System Test Hackathon In-Reply-To: References: <20180401152457.Horde.DUJAG5GadeZEl04ImLgjtXE@dukey.org> Message-ID: On Mon, Apr 2, 2018 at 9:50 AM, Emil Natan wrote: > 13/04/18 maybe? > No, the date was correct - search the list archives for 'hackathon': http://lists.ovirt.org/pipermail/users/2018-March/thread.html Only that the last mail from Rob was sent a month too late, perhaps some bug in some calendar software somewhere. > > On Sun, Apr 1, 2018 at 10:24 PM, Rob Dueckman wrote: > >> *Rob Dueckman wishes to make you aware of "oVirt System Test Hackathon".* >> *oVirt System Test Hackathon* >> *Start:* *13/03/18 00:00:00* >> *End:* *14/03/18 00:00:00* >> *Location:* *#ovirt IRC channel* >> *Attendees:* >> >> >> >> * sbonazzo at redhat.com devel at ovirt.org >> users at ovirt.org duke at dukey.org >> * >> *Description:* >> >> >> >> >> >> *Please join us in an ovirt-system-tests hackathon pushing new tests and >> improving existing ones for testing Hosted Engine.

Git repo is >> available: > href="https://www.google.com/url?q=https%3A%2F%2Fgerrit.ovirt.org%2Fgitweb%3Fp%3Dovirt-system-tests.git%3Ba%3Dsummary&sa=D&ust=1520522907926000&usg=AFQjCNHiWd7myztG_ebonGlsjNat279l_Q >> " >> target="_blank">https://gerrit.ovirt.org/gitweb?p=ovirt-system-tests.git;a=summary >>

Integration, >> Node and CI team will be available for helping in the effort and reviewing >> patches.

Here's a public trello board tracking the efforts: > href="https://trello.com/b/Pp76YoRL >> ">https://trello.com/b/Pp76YoRL >> >> -::~:~::~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~::~:~::- >> Please do not edit this section of the description. View your event at >> https://www.google.com/calendar/event?action=VIEW&eid=MDhuZTY5bXRxbGo0cnNmMzIzMzEyMjYwZnEgdXNlcnNAb3ZpcnQub3Jn&tok=MTkjc2JvbmF6em9AcmVkaGF0LmNvbTM0ZGExOGE3NjYwMTM2Y2NlN2E3OTY2NTQ4NWEzZjA4ZWM4NGU4Mjk&ctz=Europe/Rome&hl=en >> . >> -::~:~::~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~::~:~::-* >> >> Attached is an iCalendar file with more information about the event. If >> your mail client supports iTip requests you can use this file to easily >> update your local copy of the event. >> >> If your email client doesn't support iTip requests you can use the >> following links to: *accept >> *, >> *accept tentatively >> * >> or *decline >> * >> the event. >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > > > -- > Emil > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -- Didi -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/png Size: 2475 bytes Desc: not available URL: From Oliver.Riesener at hs-bremen.de Mon Apr 2 08:45:55 2018 From: Oliver.Riesener at hs-bremen.de (Oliver Riesener) Date: Mon, 2 Apr 2018 10:45:55 +0200 Subject: [ovirt-users] Issue adding network interface to VM failed with HotPlugNicVDS In-Reply-To: References: <9D829BFC-E203-47DF-B15A-6777CC169E01@hs-bremen.de> Message-ID: > Am 01.04.2018 um 11:43 schrieb Arik Hadas : > > > > On Fri, Mar 30, 2018 at 10:06 PM, Oliver Riesener > wrote: > Hi, > > running ovirt 4.2.2-6 with firewalld enabled. > > Failed to HotPlugNicVDS, error = The name org.fedoraproject.FirewallD1 was not provided by any .service files, code = 49 > > I have seen this error when trying to run a VM after starting/stoping firewalld without restarting libvirtd. > Try restarting libvirtd. > Yes, you?re right. Restarting libvirtd.service solves this situation. firealld was manually installed/restarted before and then libvirtd.server got confused. Thanks a lot! ? libvirtd.service - Virtualization daemon Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled; vendor preset: enabled) Drop-In: /etc/systemd/system/libvirtd.service.d ??unlimited-core.conf Active: active (running) since Fr 2018-03-30 08:13:29 CEST; 3 days ago Docs: man:libvirtd(8) http://libvirt.org Main PID: 2599 (libvirtd) CGroup: /system.slice/libvirtd.service ??2599 /usr/sbin/libvirtd --listen M?r 30 08:13:28 ovn-elem systemd[1]: Starting Virtualization daemon... M?r 30 08:13:29 ovn-elem systemd[1]: Started Virtualization daemon. M?r 30 19:18:37 ovn-elem libvirtd[2599]: 2018-03-30 17:18:37.552+0000: 2618: info : libvirt version: 3.2.0, package: 14.el7_4.9 (CentOS BuildSystem , 2018-03-07-13:51:24, x86-01.bsys.centos.org) M?r 30 19:18:37 ovn-elem libvirtd[2599]: 2018-03-30 17:18:37.552+0000: 2618: info : hostname: ovn-host.example.org M?r 30 19:18:37 ovn-elem libvirtd[2599]: 2018-03-30 17:18:37.552+0000: 2618: warning : qemuDomainObjBeginJobInternal:3847 : Cannot start job (query, none) for domain v-srv-home; current job is (none, migration in) owned by (0 , 0 remoteDispatchDomainMigratePrepare3Params) for (0s, 31s) M?r 30 19:18:37 ovn-elem libvirtd[2599]: 2018-03-30 17:18:37.553+0000: 2618: error : qemuDomainObjBeginJobInternal:3859 : Timed out during operation: cannot acquire state change lock (held by remoteDispatchDomainMigratePrepare3Params) M?r 30 20:43:36 ovn-elem libvirtd[2599]: 2018-03-30 18:43:36.749+0000: 2618: error : qemuDomainAgentAvailable:6030 : Guest agent is not responding: QEMU guest agent is not connected M?r 30 20:47:21 ovn-elem libvirtd[2599]: 2018-03-30 18:47:21.298+0000: 2599: error : qemuMonitorIO:697 : internal error: End of file from qemu monitor > > Can?t hot plug any new network interfaces. > > 30d6c2ab', vmId='20abce62-a558-4aee-b3e3-3fa70f1d1918'}', device='bridge', type='INTERFACE', specParams='[inbound={}, outbound={}]', address='', managed='true', plugged='true', readOnly='false', deviceAlias='', customProperties='[]', snapshotId='null', logicalName='null', hostDevice='null'}'})' execution failed: VDSGenericException: VDSErrorException: Failed to HotPlugNicVDS, error = The name org.fedoraproject.FirewallD1 was not provided by any .service files, code = 49 > 2018-03-30 20:56:08,620+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HotPlugNicVDSCommand] (default task-106) [e732710] FINISH, HotPlugNicVDSCommand, log id: 210cb07 > 2018-03-30 20:56:08,620+02 ERROR [org.ovirt.engine.core.bll.network.vm.ActivateDeactivateVmNicCommand] (default task-106) [e732710] Command 'org.ovirt.engine.core.bll.network.vm.ActivateDeactivateVmNicCommand' failed: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to HotPlugNicVDS, error = The name org.fedoraproject.FirewallD1 was not provided by any .service files, code = 49 (Failed with error ACTIVATE_NIC_FAILED and code 49) > 2018-03-30 20:56:08,627+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-106) [e732710] EVENT_ID: NETWORK_ACTIVATE_VM_INTERFACE_FAILURE(1,013), Failed to plug Network Interface nic3 (VirtIO) to VM v-srv-opt. (User: admin at internal) > 2018-03-30 20:56:08,629+02 INFO [org.ovirt.engine.core.bll.CommandCompensator] (default task-106) [e732710] Command [id=0db21508-1eeb-40f5-912e-58af9bb3fa9b]: Compensating NEW_ENTITY_ID of org.ovirt.engine.core.common.businessentities.VmDevice; snapshot: VmDeviceId:{deviceId='6d7a5b68-0eb3-4531-bc06-3aff30d6c2ab', vmId='20abce62-a558-4aee-b3e3-3fa70f1d1918'}. > 2018-03-30 20:56:08,630+02 INFO [org.ovirt.engine.core.bll.CommandCompensator] (default task-106) [e732710] Command [id=0db21508-1eeb-40f5-912e-58af9bb3fa9b]: Compensating NEW_ENTITY_ID of org.ovirt.engine.core.common.businessentities.network.VmNetworkStatistics; snapshot: 6d7a5b68-0eb3-4531-bc06-3aff30d6c2ab. > 2018-03-30 20:56:08,631+02 INFO [org.ovirt.engine.core.bll.CommandCompensator] (default task-106) [e732710] Command [id=0db21508-1eeb-40f5-912e-58af9bb3fa9b]: Compensating NEW_ENTITY_ID of org.ovirt.engine.core.common.businessentities.network.VmNetworkInterface; snapshot: 6d7a5b68-0eb3-4531-bc06-3aff30d6c2ab. > 2018-03-30 20:56:08,638+02 INFO [org.ovirt.engine.core.bll.CommandCompensator] (default task-106) [e732710] Command [id=0db21508-1eeb-40f5-912e-58af9bb3fa9b]: Compensating DELETED_OR_UPDATED_ENTITY of org.ovirt.engine.core.common.businessentities.VmStatic; snapshot: id=20abce62-a558-4aee-b3e3-3fa70f1d1918. > 2018-03-30 20:56:08,642+02 INFO [org.ovirt.engine.core.bll.CommandCompensator] (default task-106) [e732710] Command [id=0db21508-1eeb-40f5-912e-58af9bb3fa9b]: Compensating TRANSIENT_ENTITY of org.ovirt.engine.core.common.businessentities.ReleaseMacsTransientCompensation; snapshot: org.ovirt.engine.core.common.businessentities.ReleaseMacsTransientCompensation at 581c941c. > 2018-03-30 20:56:08,720+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-106) [e732710] EVENT_ID: NETWORK_ADD_VM_INTERFACE_FAILED(933), Failed to add Interface nic3 (VirtIO) to VM v-srv-opt. (User: admin at internal) > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From rightkicktech at gmail.com Mon Apr 2 10:55:53 2018 From: rightkicktech at gmail.com (Alex K) Date: Mon, 2 Apr 2018 13:55:53 +0300 Subject: [ovirt-users] ILO2 Fencing In-Reply-To: <1a85fde6-0627-058b-6224-616521a2a1a4@mdevsys.com> References: <1a85fde6-0627-058b-6224-616521a2a1a4@mdevsys.com> Message-ID: Hi, you need a second host so as power management to work. Since you verified it with command line then adding a second host should resolve this issue. In regards to the interface, you need to remove the bridge interface as instructed (make it a simple interface) then leave ovirt to configure it ovirtmgmt bridge. Alex On Wed, Mar 28, 2018 at 9:17 AM, TomK wrote: > Hey Guy's, > > I've tested my ILO2 fence from the ovirt engine CLI and that works: > > fence_ilo2 -a 192.168.0.37 -l --password="" --ssl-insecure > --tls1.0 -v -o status > > The UI gives me: > > Test failed: Failed to run fence status-check on host 'ph-host01.my.dom'. > No other host was available to serve as proxy for the operation. > > Going to add a second host in a bit but anyway to get this working with > just one host? I'm just adding the one host to oVirt for some POC we are > doing atm but the UI forces me to adjust Power Management settings before > proceeding. > > Also: > > 2018-03-28 02:04:15,183-04 WARN [org.ovirt.engine.core.bll.network.NetworkConfigurator] > (EE-ManagedThreadFactory-engine-Thread-335) [2d691be9] Failed to find a > valid interface for the management network of host ph-host01.my.dom. If the > interface br0 is a bridge, it should be torn-down manually. > 2018-03-28 02:04:15,184-04 ERROR [org.ovirt.engine.core.bll.hos > tdeploy.InstallVdsInternalCommand] (EE-ManagedThreadFactory-engine-Thread-335) > [2d691be9] Exception: org.ovirt.engine.core.bll.netw > ork.NetworkConfigurator$NetworkConfiguratorException: Interface br0 is > invalid for management network > > > I've these defined as such but not clear what it is expecting: > > [root at ph-host01 ~]# ip a > 1: lo: mtu 65536 qdisc noqueue state UNKNOWN qlen 1 > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > inet 127.0.0.1/8 scope host lo > valid_lft forever preferred_lft forever > inet6 ::1/128 scope host > valid_lft forever preferred_lft forever > 2: eth0: mtu 1500 qdisc mq master > bond0 state UP qlen 1000 > link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff > 3: eth1: mtu 1500 qdisc mq > master bond0 state DOWN qlen 1000 > link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff > 4: eth2: mtu 1500 qdisc mq > master bond0 state DOWN qlen 1000 > link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff > 5: eth3: mtu 1500 qdisc mq > master bond0 state DOWN qlen 1000 > link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff > 21: bond0: mtu 1500 qdisc > noqueue master br0 state UP qlen 1000 > link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff > inet6 fe80::7ae7:d1ff:fe8c:b1ba/64 scope link > valid_lft forever preferred_lft forever > 23: ;vdsmdummy;: mtu 1500 qdisc noop state DOWN qlen > 1000 > link/ether fe:69:c7:50:0d:dd brd ff:ff:ff:ff:ff:ff > 24: br0: mtu 1500 qdisc noqueue state > UP qlen 1000 > link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff > inet 192.168.0.39/23 brd 192.168.1.255 scope global br0 > valid_lft forever preferred_lft forever > inet6 fe80::7ae7:d1ff:fe8c:b1ba/64 scope link > valid_lft forever preferred_lft forever > [root at ph-host01 ~]# cd /etc/sysconfig/network-scripts/ > [root at ph-host01 network-scripts]# cat ifcfg-br0 > DEVICE=br0 > TYPE=Bridge > BOOTPROTO=none > IPADDR=192.168.0.39 > NETMASK=255.255.254.0 > GATEWAY=192.168.0.1 > ONBOOT=yes > DELAY=0 > USERCTL=no > DEFROUTE=yes > NM_CONTROLLED=no > DOMAIN="my.dom nix.my.dom" > SEARCH="my.dom nix.my.dom" > HOSTNAME=ph-host01.my.dom > DNS1=192.168.0.224 > DNS2=192.168.0.44 > DNS3=192.168.0.45 > ZONE=public > [root at ph-host01 network-scripts]# cat ifcfg-bond0 > DEVICE=bond0 > ONBOOT=yes > BOOTPROTO=none > USERCTL=no > NM_CONTROLLED=no > BONDING_OPTS="miimon=100 mode=2" > BRIDGE=br0 > # > # > # IPADDR=192.168.0.39 > # NETMASK=255.255.254.0 > # GATEWAY=192.168.0.1 > # DNS1=192.168.0.1 > [root at ph-host01 network-scripts]# > > > -- > Cheers, > Tom K. > ------------------------------------------------------------ > ------------------------- > > Living on earth is expensive, but it includes a free trip around the sun. > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From mburman at redhat.com Mon Apr 2 10:56:51 2018 From: mburman at redhat.com (Michael Burman) Date: Mon, 2 Apr 2018 13:56:51 +0300 Subject: [ovirt-users] SR-IOV and oVirt In-Reply-To: References: Message-ID: Hi Joe, First of all, if you using the SR-IOV feature, you should use it only as pci-passthrough vNICs only. Not as host-devices. Our documentation is correct and is says : "adding a Network Interface with type PCI Passthrough" When enabling VFs on the host level, the expected MAC address for the VFs is 02:00:00:00:00:01 and that is the correct behaviour. Once you will create a network with 'passthrough' vNIC profile and then add this as a vNIC to the guest VM, once the guest will run, you will see that each pci-passthrough vNIC got it's own unique MAC address. No matter how much VFs you are using, each pci-passthrough vNIC will get it's own MAC address. For vlan, you can create the network(passthrough) with the desired vlan tag and it will be passed to the guest on run VM. Cheers) On Thu, Mar 29, 2018 at 6:00 PM, wrote: > I am working with a customer on enabling sriov within oVirt and were > noticing a couple of issues. > > 1. Whenever we assign the Number of VFs to a physical adapter in one > of our hosts, it seems to set the mac addresses of each of the VFs to > something other than all zeros. Ex. 02:00:00:00:00:01 > 2. The above behavior seems to create duplicate mac addresses when we > assign 2 or more VFs to a guest VM. All zeros will tell the guest VM that > it needs to set the mac. If the guest vm sees something other than all > zeros, it will think that it was administratively assigned already and > leave as is. > 3. We were expecting oVirt to set all of the MAC addresses of the VFs > initially to all zeros. Then when we assign these VFs to the guest VM, the > guest VM will assign a unique MAC to each of the VFs. > 4. Please note that we are assigning the VF to the guest VM by adding > a Host Device (the specific pci host device for the VF). This seems to be > different than your docs which shows adding a Network Interface with type > PCI Passthrough. > 5. If we manually run the following command from an ssh session: *echo > 4 > /sys/class/net/ens4f0/device/sriov_numvfs* > > it will set all of the VFs mac addresses to all zeros. Then when we > assign the pci host device to the guest VM through oVirt, it creates unique > macs for both vnics. However, when we reboot the Host, it seems to revert > back to the oVirt assigned macs of 02:00:00:00:00:01. > > Do know why this might be happening? Should we be assigning the VFs to > the guest VM by adding a network interface with type PCI Passthrough? > Ultimately our goal is to enable sriov within oVirt and be able to assign > multiple VFs to the guest VMs with each getting a unique mac. We also want > to do the vlan tagging via an application running on the guest VM (not at > the Host level.) > > Thank you for any help, > > jp > > > > > > > *Joe Paolicelli (JP) *Virtualization Specialist, Ixia Solutions Group > Keysight Technologies > > e: *jp at keysight.com * > t: 469.556.6042 <(469)%20556-6042> > www.ixiacom.com > > > [image: cid:image002.png at 01D2DA11.7BFEC8C0] > > > > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -- Michael Burman Senior Quality engineer - rhv network - redhat israel Red Hat mburman at redhat.com M: 0545355725 IM: mburman -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.png Type: image/png Size: 20599 bytes Desc: not available URL: From ykaul at redhat.com Mon Apr 2 10:59:51 2018 From: ykaul at redhat.com (Yaniv Kaul) Date: Mon, 2 Apr 2018 13:59:51 +0300 Subject: [ovirt-users] Resilient Storage for Ovirt In-Reply-To: References: Message-ID: On Sat, Mar 24, 2018 at 3:55 AM, Vincent Royer wrote: > Hi, > > I have a 2 node cluster with Hosted Engine attached to a storage Domain > (NFS share) served by WS2016. I run about a dozen VMs. > > I need to improve availability / resilience of the storage domain, and > also the I/O performance. > > Anytime we need to reboot the Windows Server, its a nightmare for the > cluster, we have to put it all into maintenance and take it down. When the > Storage server crashes (has happened once) or Windows decides to install an > update and reboot (has happened once), the storage domain obviously goes > down and sometimes the hosts have a difficult time re-connecting. > > I can afford a second bare metal server and am looking for input in the > best way to provide a highly available storage domain. Ideally I'd like to > be able to reboot either storage server without disrupting Ovirt. Should I > be looking at clustering with Windows Server, or moving to a different OS? > > I currently run the Storage in RAID10 (spinning discs) and have the option > of adding CacheCade to the array w/ SSD. Would that help I/O for small > random R/W? > > What are the suggested options for this scenario? > The easiest suggestion would be to move away from NFS. While NFS can be made highly available (using pNFS and friends) and it's not that easy (nor intuitive from oVirt). iSCSI or FC are much better suited for the task, with multipathing and iSCSI bonding (poor choice of terminology here). You would need to use bonding (this time network bonding) and highly-available NFS server (with a floating IP between the nodes most likely) to succeed. Y. > > Thanks > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From rabidcicada at gmail.com Mon Apr 2 14:52:45 2018 From: rabidcicada at gmail.com (RabidCicada) Date: Mon, 2 Apr 2018 10:52:45 -0400 Subject: [ovirt-users] hosted-engine Debug Help Message-ID: Heyo everyone. I'm trying to debug hosted-engine --deploy. It is failing in `Copy configuration archive to storage` in `create_target_vm.yml` from `hosted-engine --deploy`. My general and most important query here is how to get good debug output from ansible through hosted-engine. I'm running hosted-engine through an ssh session. I can't figure out how to get good debug output from ansible within that workflow. I see it's running through otopi, I tried setting typical `debugger: on_failed` hooks etc and tried many incantations on the command line and config files to get ansible to help me out. The debugger: directive and other debugger related ansible config file stuff wouldn't result in any debugger popping up. I also can't seem to pass normal -vvvv flags to hosted-engine either and get it to ansible. Ultimately I tried to use a `pause` directive and it complained that it was in a non-interactive shell. I figured it might be the result of my ssh session so I enabled tty allocation with -t -t. It did not resolve the issue. I eventually wrote-my-own/stole a callback_plugin that checks an environmental variable and enables `display.verbosity = int(v)` since I can't seem to pass typical -vvvv stuff to ansible through `hosted-engine --deploy`. It give me the best info that I have so far. But it wont give me enough to debug issues around Gathering Facts or what looks like a sudo/permission problem in `Copy configuration archive to storage` in `create_target_vm.yml`. I took and used the exact command that they use manually and it works when I run it manually (But I can't get debug output to show me the exact sudo command being executed), hence my interest in passing -vvvv or equivalent to ansible through `hosted-engine`. I intentionally disabled the VM_directory cleanup so that I could execute the same stuff. So....after all that...what is a good way to get deep debug info from hosted-engine ansible stuff? Or does anyone have intuition for the possible sudo problem? ~Kyle -------------- next part -------------- An HTML attachment was scrubbed... URL: From budic at onholyground.com Mon Apr 2 15:22:43 2018 From: budic at onholyground.com (Darrell Budic) Date: Mon, 2 Apr 2018 10:22:43 -0500 Subject: [ovirt-users] Issues with ZFS volume creation In-Reply-To: References: Message-ID: Try it with ?force, if the disks have any kind of partition table on them, zfs will not allow you to over-write them by default. If it?s still complaining about the disks being in use, it?s probably mutlipathd grabbing them. multipath -l or multipath -ll will show the to you. You may be able to get the pool creation done by doing ?multipath -f? to clear the ables and creating the pool before multipathd grabs the disks again, or you may want to read up on mutlipathd and edit your configs to prevent it from grabbing the disks you?re trying to use (or configure it for mutipath access to said disk, if you have the hardware for it). > From: Tal Bar-Or > Subject: [ovirt-users] Issues with ZFS volume creation > Date: March 25, 2018 at 9:54:35 AM CDT > To: users > > > Hello All, > I know this question is might be out of Ovirt scope, but I don't have anywhere else to ask for this issue (ZFS users mailing doesn't work), so I am trying my luck here anyway > so the issues go as follows : > > Installed ZFS on top of CentOs 7.4 with Ovirt 4.2 , on physical Dell R720 with 15 sas 10 k 1.2TB each attached to PERC H310 adapter, disks are configured to non-raid, all went OK, but when I am trying to create new zfs pool using the following command: > > zpool create -m none -o ashift=12 zvol raidz2 sda sdb sdc sdd sde sdf sdg sdh sdi sdj sdk sdl sdm > I get the following error below: > /dev/sda is in use and contains a unknown filesystem. > /dev/sdb is in use and contains a unknown filesystem. > /dev/sdc is in use and contains a unknown filesystem. > /dev/sdd is in use and contains a unknown filesystem. > /dev/sde is in use and contains a unknown filesystem. > /dev/sdf is in use and contains a unknown filesystem. > /dev/sdg is in use and contains a unknown filesystem. > /dev/sdh is in use and contains a unknown filesystem. > /dev/sdi is in use and contains a unknown filesystem. > /dev/sdj is in use and contains a unknown filesystem. > /dev/sdk is in use and contains a unknown filesystem. > /dev/sdl is in use and contains a unknown filesystem. > /dev/sdm is in use and contains a unknown filesystem. > > When typing command lsblk I get the following output below, all seems ok, any idea what could be wrong? > Please advice > Thanks > > # lsblk > NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT > sda 8:0 0 1.1T 0 disk > ??35000cca07245c0ec 253:2 0 1.1T 0 mpath > sdb 8:16 0 1.1T 0 disk > ??35000cca072463898 253:10 0 1.1T 0 mpath > sdc 8:32 0 1.1T 0 disk > ??35000cca0724540e8 253:8 0 1.1T 0 mpath > sdd 8:48 0 1.1T 0 disk > ??35000cca072451b68 253:7 0 1.1T 0 mpath > sde 8:64 0 1.1T 0 disk > ??35000cca07245f578 253:3 0 1.1T 0 mpath > sdf 8:80 0 1.1T 0 disk > ??35000cca07246c568 253:11 0 1.1T 0 mpath > sdg 8:96 0 1.1T 0 disk > ??35000cca0724620c8 253:12 0 1.1T 0 mpath > sdh 8:112 0 1.1T 0 disk > ??35000cca07245d2b8 253:13 0 1.1T 0 mpath > sdi 8:128 0 1.1T 0 disk > ??35000cca07245f0e8 253:4 0 1.1T 0 mpath > sdj 8:144 0 1.1T 0 disk > ??35000cca072418958 253:5 0 1.1T 0 mpath > sdk 8:160 0 1.1T 0 disk > ??35000cca072429700 253:1 0 1.1T 0 mpath > sdl 8:176 0 1.1T 0 disk > ??35000cca07245d848 253:9 0 1.1T 0 mpath > sdm 8:192 0 1.1T 0 disk > ??35000cca0724625a8 253:0 0 1.1T 0 mpath > sdn 8:208 0 1.1T 0 disk > ??35000cca07245f5ac 253:6 0 1.1T 0 mpath > > > -- > Tal Bar-or > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users -------------- next part -------------- An HTML attachment was scrubbed... URL: From tomkcpr at mdevsys.com Mon Apr 2 17:58:44 2018 From: tomkcpr at mdevsys.com (TomK) Date: Mon, 2 Apr 2018 13:58:44 -0400 Subject: [ovirt-users] ILO2 Fencing In-Reply-To: References: <1a85fde6-0627-058b-6224-616521a2a1a4@mdevsys.com> Message-ID: On 4/2/2018 6:55 AM, Alex K wrote: First issue with fencing is solved per an earlier reply. Second issue has also been solved earlier the way you outlined but I'm wondering why oVirt can't use br0 as the ovirtmgmt interface instead? What specific settings on br0 does it NOT like? Is there any provision or flexibility to allow for custom defined bridges with oVirt? I stumbled upon this page: https://www.ovirt.org/documentation/how-to/networking/bonding-vlan-bridge/ and tried it but oVirt would have none of it. After I let oVirt setup it's own bridges, I can see the settings it used (below) but wondering what *specific* settings in the network scripts does it not like? Would like to know what we can and can't touch in the config files if we need to tweak the setup in higher level environments. Cheers, Tom 1098 -rw-rw-r--. 1 root root 289 Mar 29 03:30 ifcfg-ovirtmgmt 127014 -rw-rw-r--. 1 root root 145 Mar 29 03:30 ifcfg-eth0 127022 -rw-rw-r--. 1 root root 145 Mar 29 03:30 ifcfg-eth1 127016 -rw-rw-r--. 1 root root 145 Mar 29 03:30 ifcfg-eth2 127029 -rw-rw-r--. 1 root root 145 Mar 29 03:30 ifcfg-eth3 3039 -rw-rw-r--. 1 root root 169 Mar 29 03:30 route-ovirtmgmt 3200 -rw-rw-r--. 1 root root 166 Mar 29 03:30 rule-ovirtmgmt 127032 -rw-rw-r--. 1 root root 199 Mar 31 00:35 ifcfg-bond0 222656 drwxr-xr-x. 2 root root 4096 Mar 31 00:39 . [root at mdskvm-p01 network-scripts]# cat ifcfg-bond0 # Generated by VDSM version 4.20.23-1.el7.centos DEVICE=bond0 BONDING_OPTS='mode=1 miimon=100' BRIDGE=ovirtmgmt MACADDR=78:e7:d1:8f:4d:26 ONBOOT=yes MTU=1500 DEFROUTE=no NM_CONTROLLED=no IPV6INIT=no [root at mdskvm-p01 network-scripts]# [root at mdskvm-p01 network-scripts]# [root at mdskvm-p01 network-scripts]# [root at mdskvm-p01 network-scripts]# cat ifcfg-ovirtmgmt # Generated by VDSM version 4.20.23-1.el7.centos DEVICE=ovirtmgmt TYPE=Bridge DELAY=0 STP=off ONBOOT=yes IPADDR=192.168.0.60 NETMASK=255.255.255.0 GATEWAY=192.168.0.1 BOOTPROTO=none MTU=1500 DEFROUTE=yes NM_CONTROLLED=no IPV6INIT=yes IPV6_AUTOCONF=yes DNS1=192.168.0.224 DNS2=192.168.0.44 [root at mdskvm-p01 network-scripts]# cat route-ovirtmgmt # Generated by VDSM version 4.20.23-1.el7.centos 0.0.0.0/0 via 192.168.0.1 dev ovirtmgmt table 3232235580 192.168.0.0/24 via 192.168.0.60 dev ovirtmgmt table 3232235580 [root at mdskvm-p01 network-scripts]# cat rule-ovirtmgmt # Generated by VDSM version 4.20.23-1.el7.centos from 192.168.0.0/24 prio 32000 table 3232235580 from all to 192.168.0.0/24 dev ovirtmgmt prio 32000 table 3232235580 [root at mdskvm-p01 network-scripts]# > Hi, > > you need a second host so as power management to work. > Since you verified it with command line then adding a second host should > resolve this issue. > > In regards to the interface, you need to remove the bridge interface as > instructed (make it a simple interface) then leave ovirt to configure it > ovirtmgmt bridge. > > > Alex > > On Wed, Mar 28, 2018 at 9:17 AM, TomK > wrote: > > Hey Guy's, > > I've tested my ILO2 fence from the ovirt engine CLI and that works: > > fence_ilo2 -a 192.168.0.37 -l --password="" > --ssl-insecure --tls1.0 -v -o status > > The UI gives me: > > Test failed: Failed to run fence status-check on host > 'ph-host01.my.dom'.? No other host was available to serve as proxy > for the operation. > > Going to add a second host in a bit but anyway to get this working > with just one host?? I'm just adding the one host to oVirt for some > POC we are doing atm but the UI forces me to adjust Power Management > settings before proceeding. > > Also: > > 2018-03-28 02:04:15,183-04 WARN [org.ovirt.engine.core.bll.net > work.NetworkConfigurator] > (EE-ManagedThreadFactory-engine-Thread-335) [2d691be9] Failed to > find a valid interface for the management network of host > ph-host01.my.dom. If the interface br0 is a bridge, it should be > torn-down manually. > 2018-03-28 02:04:15,184-04 ERROR > [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand] > (EE-ManagedThreadFactory-engine-Thread-335) [2d691be9] Exception: > org.ovirt.engine.core.bll.network.NetworkConfigurator$NetworkConfiguratorException: > Interface br0 is invalid for management network > > > I've these defined as such but not clear what it is expecting: > > [root at ph-host01 ~]# ip a > 1: lo: mtu 65536 qdisc noqueue state UNKNOWN > qlen 1 > ? ? link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > ? ? inet 127.0.0.1/8 scope host lo > ? ? ? ?valid_lft forever preferred_lft forever > ? ? inet6 ::1/128 scope host > ? ? ? ?valid_lft forever preferred_lft forever > 2: eth0: mtu 1500 qdisc mq > master bond0 state UP qlen 1000 > ? ? link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff > 3: eth1: mtu 1500 qdisc mq > master bond0 state DOWN qlen 1000 > ? ? link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff > 4: eth2: mtu 1500 qdisc mq > master bond0 state DOWN qlen 1000 > ? ? link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff > 5: eth3: mtu 1500 qdisc mq > master bond0 state DOWN qlen 1000 > ? ? link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff > 21: bond0: mtu 1500 qdisc > noqueue master br0 state UP qlen 1000 > ? ? link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff > ? ? inet6 fe80::7ae7:d1ff:fe8c:b1ba/64 scope link > ? ? ? ?valid_lft forever preferred_lft forever > 23: ;vdsmdummy;: mtu 1500 qdisc noop state > DOWN qlen 1000 > ? ? link/ether fe:69:c7:50:0d:dd brd ff:ff:ff:ff:ff:ff > 24: br0: mtu 1500 qdisc noqueue > state UP qlen 1000 > ? ? link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff > ? ? inet 192.168.0.39/23 brd 192.168.1.255 > scope global br0 > ? ? ? ?valid_lft forever preferred_lft forever > ? ? inet6 fe80::7ae7:d1ff:fe8c:b1ba/64 scope link > ? ? ? ?valid_lft forever preferred_lft forever > [root at ph-host01 ~]# cd /etc/sysconfig/network-scripts/ > [root at ph-host01 network-scripts]# cat ifcfg-br0 > DEVICE=br0 > TYPE=Bridge > BOOTPROTO=none > IPADDR=192.168.0.39 > NETMASK=255.255.254.0 > GATEWAY=192.168.0.1 > ONBOOT=yes > DELAY=0 > USERCTL=no > DEFROUTE=yes > NM_CONTROLLED=no > DOMAIN="my.dom nix.my.dom" > SEARCH="my.dom nix.my.dom" > HOSTNAME=ph-host01.my.dom > DNS1=192.168.0.224 > DNS2=192.168.0.44 > DNS3=192.168.0.45 > ZONE=public > [root at ph-host01 network-scripts]# cat ifcfg-bond0 > DEVICE=bond0 > ONBOOT=yes > BOOTPROTO=none > USERCTL=no > NM_CONTROLLED=no > BONDING_OPTS="miimon=100 mode=2" > BRIDGE=br0 > # > # > # IPADDR=192.168.0.39 > # NETMASK=255.255.254.0 > # GATEWAY=192.168.0.1 > # DNS1=192.168.0.1 > [root at ph-host01 network-scripts]# > > > -- > Cheers, > Tom K. > ------------------------------------------------------------------------------------- > > Living on earth is expensive, but it includes a free trip around the > sun. > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -- Cheers, Tom K. ------------------------------------------------------------------------------------- Living on earth is expensive, but it includes a free trip around the sun. From dhy336 at sina.com Tue Apr 3 00:42:12 2018 From: dhy336 at sina.com (dhy336 at sina.com) Date: Tue, 03 Apr 2018 08:42:12 +0800 Subject: [ovirt-users] ovirt engine HA Message-ID: <20180403004212.5937F4800AC@webmail.sinamail.sina.com.cn> How to solute ovirt engine HA, I have a three node cluster, one of is deploy engine and node , others are node, if node that deplay engine and node crash, How to ensure my server is up? -------------- next part -------------- An HTML attachment was scrubbed... URL: From vincent at epicenergy.ca Tue Apr 3 00:57:19 2018 From: vincent at epicenergy.ca (Vincent Royer) Date: Mon, 2 Apr 2018 17:57:19 -0700 Subject: [ovirt-users] ovirt engine HA In-Reply-To: <20180403004212.5937F4800AC@webmail.sinamail.sina.com.cn> References: <20180403004212.5937F4800AC@webmail.sinamail.sina.com.cn> Message-ID: If your node running self-hosted engine crashes, the hosted engine will be started up on another node. It just takes a few minutes for this all to happen, but it works reliably in my experience. On Mon, Apr 2, 2018 at 5:42 PM, wrote: > How to solute ovirt engine HA, I have a three node cluster, one of is > deploy engine and node , others are node, if node that deplay engine and > node crash, How to ensure my server is up? > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dhy336 at sina.com Tue Apr 3 01:07:09 2018 From: dhy336 at sina.com (dhy336 at sina.com) Date: Tue, 03 Apr 2018 09:07:09 +0800 Subject: [ovirt-users] =?gbk?b?u9i4tKO6UmU6ICBvdmlydCBlbmdpbmUgSEE=?= Message-ID: <20180403010709.24D5E19000CD@webmail.sinamail.sina.com.cn> what different between self-hosted engine and hosted engine? I find a project ovirt-hosted-engine-ha https://github.com/oVirt/ovirt-hosted-engine-ha ----- ???? ----- ????Vincent Royer ????dhy336 at sina.com ????users ???Re: [ovirt-users] ovirt engine HA ???2018?04?03? 08?57? If your node running self-hosted engine crashes, the hosted engine will be started up on another node. It just takes a few minutes for this all to happen, but it works reliably in my experience. On Mon, Apr 2, 2018 at 5:42 PM, wrote: How to solute ovirt engine HA, I have a three node cluster, one of is deploy engine and node , others are node, if node that deplay engine and node crash, How to ensure my server is up? _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users -------------- next part -------------- An HTML attachment was scrubbed... URL: From nicolas.vaye at province-sud.nc Tue Apr 3 04:51:14 2018 From: nicolas.vaye at province-sud.nc (Nicolas Vaye) Date: Tue, 3 Apr 2018 04:51:14 +0000 Subject: [ovirt-users] mismatch between openshift rpm and openshift release during metric store installation Message-ID: <1522731072.9866.27.camel@province-sud.nc> Hello, during the installation of metric store server https://ovirt.org/develop/release-management/features/metrics/metrics-store/ https://www.ovirt.org/develop/release-management/features/metrics/metrics-store-installation/#run-ovirt-metrics-store-installation-playbook https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/ i have the following issue during the execution of ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e @/root/vars.yaml -i /root/ansible-inventory-origin-37-aio playbooks/byo/config.yml TASK [openshift_version : For an RPM install, abort when the release requested does not match the available version.] ******************************************************************** task path: /usr/share/ansible/openshift-ansible/roles/openshift_version/tasks/main.yml:190 fatal: [localhost]: FAILED! => { "assertion": "openshift_version.startswith(openshift_release) | bool", "changed": false, "evaluated_to": false, "msg": "You requested openshift_release 3.7, which is not matched by\nthe latest OpenShift RPM we detected as origin-3.10.0\non host localhost.\nWe will only install the latest RPMs, so please ensure you are getting the release\nyou expect. You may need to adjust your Ansible inventory, modify the repositories\navailable on the host, or run the appropriate OpenShift upgrade playbook." } to retry, use: --limit @/usr/share/ansible/openshift-ansible/playbooks/byo/config.retry PLAY RECAP ******************************************************************************************************************************************************************************* localhost : ok=59 changed=4 unreachable=0 failed=1 Failure summary: 1. Hosts: localhost Play: Determine openshift_version to configure on first master Task: For an RPM install, abort when the release requested does not match the available version. Message: You requested openshift_release 3.7, which is not matched by the latest OpenShift RPM we detected as origin-3.10.0 on host localhost. We will only install the latest RPMs, so please ensure you are getting the release you expect. You may need to adjust your Ansible inventory, modify the repositories available on the host, or run the appropriate OpenShift upgrade playbook. What can i do ? ansible.log in attachment. Regards, Nicolas VAYE -------------- next part -------------- A non-text attachment was scrubbed... Name: ansible.zip Type: application/zip Size: 413909 bytes Desc: ansible.zip URL: From vincent at epicenergy.ca Tue Apr 3 05:01:34 2018 From: vincent at epicenergy.ca (Vincent Royer) Date: Mon, 2 Apr 2018 22:01:34 -0700 Subject: [ovirt-users] ovirt engine HA In-Reply-To: <20180403010709.24D5E19000CD@webmail.sinamail.sina.com.cn> References: <20180403010709.24D5E19000CD@webmail.sinamail.sina.com.cn> Message-ID: Same thing, the engine in this case is "self-hosted", as in, it runs in a VM hosted on the cluster that it is managing. I am a beginner here, but from my understanding, each node is always checking on the health of the engine VM. If the engine is missing (ie, the host running it has gone down), then another available, healthy host will spawn up the engine and you will regain access. In my experience this has worked very reliably. I have 2 hosts, both are "able" to run the engine VM. If I take one host down, I am not able to load the engine GUI. But if I wait a few minutes, then I regain access, and see that the engine is now running on the remaining healthy host. *Vincent Royer* *778-825-1057* *SUSTAINABLE MOBILE ENERGY SOLUTIONS* On Mon, Apr 2, 2018 at 6:07 PM, wrote: > what different between self-hosted engine and hosted engine? I find a > project ovirt-hosted-engine-ha > https: > //github.com/oVirt/ovirt-hosted-engine-ha > ----- ???? ----- > ????Vincent Royer > ????dhy336 at sina.com > ????users > ???Re: [ovirt-users] ovirt engine HA > ???2018?04?03? 08?57? > > If your node running self-hosted engine crashes, the hosted engine will be > started up on another node. It just takes a few minutes for this all to > happen, but it works reliably in my experience. > > > > On Mon, Apr 2, 2018 at 5:42 PM, wrote: > > How to solute ovirt engine HA, I have a three node cluster, one of is > deploy engine and node , others are node, if node that deplay engine and > node crash, How to ensure my server is up? > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dhy336 at sina.com Tue Apr 3 05:42:19 2018 From: dhy336 at sina.com (dhy336 at sina.com) Date: Tue, 03 Apr 2018 13:42:19 +0800 Subject: [ovirt-users] =?gbk?b?u9i4tKO6UmU6IFJlOiAgb3ZpcnQgZW5naW5lIEhB?= Message-ID: <20180403054219.ACA18C000AF@webmail.sinamail.sina.com.cn> Thank you, How to deploy self-hosted engine? may you give me some data for self-hosted engine. ----- ???? ----- ????Vincent Royer ????dhy336 at sina.com ????users ???Re: Re: [ovirt-users] ovirt engine HA ???2018?04?03? 13?02? Same thing, the engine in this case is "self-hosted", as in, it runs in a VM hosted on the cluster that it is managing. I am a beginner here, but from my understanding, each node is always checking on the health of the engine VM. If the engine is missing (ie, the host running it has gone down), then another available, healthy host will spawn up the engine and you will regain access. In my experience this has worked very reliably. I have 2 hosts, both are "able" to run the engine VM. If I take one host down, I am not able to load the engine GUI. But if I wait a few minutes, then I regain access, and see that the engine is now running on the remaining healthy host. Vincent Royer778-825-1057 SUSTAINABLE MOBILE ENERGY SOLUTIONS On Mon, Apr 2, 2018 at 6:07 PM, wrote: what different between self-hosted engine and hosted engine? I find a project ovirt-hosted-engine-ha https://github.com/oVirt/ovirt-hosted-engine-ha ----- ???? ----- ????Vincent Royer ????dhy336 at sina.com ????users ???Re: [ovirt-users] ovirt engine HA ???2018?04?03? 08?57? If your node running self-hosted engine crashes, the hosted engine will be started up on another node. It just takes a few minutes for this all to happen, but it works reliably in my experience. On Mon, Apr 2, 2018 at 5:42 PM, wrote: How to solute ovirt engine HA, I have a three node cluster, one of is deploy engine and node , others are node, if node that deplay engine and node crash, How to ensure my server is up? _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users -------------- next part -------------- An HTML attachment was scrubbed... URL: From vincent at epicenergy.ca Tue Apr 3 05:58:47 2018 From: vincent at epicenergy.ca (Vincent Royer) Date: Tue, 03 Apr 2018 05:58:47 +0000 Subject: [ovirt-users] ovirt engine HA In-Reply-To: <20180403054219.ACA18C000AF@webmail.sinamail.sina.com.cn> References: <20180403054219.ACA18C000AF@webmail.sinamail.sina.com.cn> Message-ID: Sounds like you should start here https://ovirt.org/documentation/self-hosted/Self-Hosted_Engine_Guide/ On Mon, Apr 2, 2018, 10:42 PM , wrote: > Thank you, How to deploy self-hosted engine? may you give me some data for > self-hosted engine. > ----- ???? ----- > ????Vincent Royer > ????dhy336 at sina.com > ????users > ???Re: Re: [ovirt-users] ovirt engine HA > ???2018?04?03? 13?02? > > Same thing, the engine in this case is "self-hosted", as in, it runs in a > VM hosted on the cluster that it is managing. I am a beginner here, but > from my understanding, each node is always checking on the health of the > engine VM. If the engine is missing (ie, the host running it has gone > down), then another available, healthy host will spawn up the engine and > you will regain access. > > In my experience this has worked very reliably. I have 2 hosts, both are > "able" to run the engine VM. If I take one host down, I am not able to > load the engine GUI. But if I wait a few minutes, then I regain access, > and see that the engine is now running on the remaining healthy host. > > *Vincent Royer* > *778-825-1057* > > > > *SUSTAINABLE MOBILE ENERGY SOLUTIONS* > > > > > On Mon, Apr 2, 2018 at 6:07 PM, wrote: > > what different between self-hosted engine and hosted engine? I find a > project ovirt-hosted-engine-ha > > https://github.com/oVirt/ovirt-hosted-engine-ha > ----- ???? ----- > ????Vincent Royer > ????dhy336 at sina.com > ????users > ???Re: [ovirt-users] ovirt engine HA > ???2018?04?03? 08?57? > > If your node running self-hosted engine crashes, the hosted engine will be > started up on another node. It just takes a few minutes for this all to > happen, but it works reliably in my experience. > > > > On Mon, Apr 2, 2018 at 5:42 PM, wrote: > > How to solute ovirt engine HA, I have a three node cluster, one of is > deploy engine and node , others are node, if node that deplay engine and > node crash, How to ensure my server is up? > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dhy336 at sina.com Tue Apr 3 06:06:58 2018 From: dhy336 at sina.com (dhy336 at sina.com) Date: Tue, 03 Apr 2018 14:06:58 +0800 Subject: [ovirt-users] =?gbk?b?u9i4tKO6UmU6IFJlOiBSZTogIG92aXJ0IGVuZ2lu?= =?gbk?q?e_HA?= Message-ID: <20180403060658.9E2406C01BB@webmail.sinamail.sina.com.cn> thanks, ----- ???? ----- ????Vincent Royer ????dhy336 at sina.com ????Users ???Re: Re: Re: [ovirt-users] ovirt engine HA ???2018?04?03? 13?59? Sounds like you should start here https://ovirt.org/documentation/self-hosted/Self-Hosted_Engine_Guide/ On Mon, Apr 2, 2018, 10:42 PM , wrote: Thank you, How to deploy self-hosted engine? may you give me some data for self-hosted engine. ----- ???? ----- ????Vincent Royer ????dhy336 at sina.com ????users ???Re: Re: [ovirt-users] ovirt engine HA ???2018?04?03? 13?02? Same thing, the engine in this case is "self-hosted", as in, it runs in a VM hosted on the cluster that it is managing. I am a beginner here, but from my understanding, each node is always checking on the health of the engine VM. If the engine is missing (ie, the host running it has gone down), then another available, healthy host will spawn up the engine and you will regain access. In my experience this has worked very reliably. I have 2 hosts, both are "able" to run the engine VM. If I take one host down, I am not able to load the engine GUI. But if I wait a few minutes, then I regain access, and see that the engine is now running on the remaining healthy host. Vincent Royer778-825-1057 SUSTAINABLE MOBILE ENERGY SOLUTIONS On Mon, Apr 2, 2018 at 6:07 PM, wrote: what different between self-hosted engine and hosted engine? I find a project ovirt-hosted-engine-ha https://github.com/oVirt/ovirt-hosted-engine-ha ----- ???? ----- ????Vincent Royer ????dhy336 at sina.com ????users ???Re: [ovirt-users] ovirt engine HA ???2018?04?03? 08?57? If your node running self-hosted engine crashes, the hosted engine will be started up on another node. It just takes a few minutes for this all to happen, but it works reliably in my experience. On Mon, Apr 2, 2018 at 5:42 PM, wrote: How to solute ovirt engine HA, I have a three node cluster, one of is deploy engine and node , others are node, if node that deplay engine and node crash, How to ensure my server is up? _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users -------------- next part -------------- An HTML attachment was scrubbed... URL: From raghav at exzatechconsulting.com Tue Apr 3 06:38:18 2018 From: raghav at exzatechconsulting.com (Anantha Raghava) Date: Tue, 3 Apr 2018 12:08:18 +0530 Subject: [ovirt-users] Engine reports Message-ID: Hi, I see that oVirt DWH is installed with Version 4.2.x. Now, how do I take the reports? I version 3.5, we had Jasper reports module using which we could take utilization reports. Can we do something similar here? -- Thanks & Regards, Anantha Raghava Do not print this e-mail unless required. Save Paper & trees. -------------- next part -------------- An HTML attachment was scrubbed... URL: From magheshkumar.g at nokia.com Mon Apr 2 10:31:27 2018 From: magheshkumar.g at nokia.com (G, Maghesh Kumar (Nokia - IN/Bangalore)) Date: Mon, 2 Apr 2018 10:31:27 +0000 Subject: [ovirt-users] Install oVirt node without Internet repository Message-ID: Hi Description of problem: Cannot add host - install fails & Install oVirt node without Internet repository Version: Ovirt-4.2 Host is installed with RHEL 7.4 Actual results: Host KVM02 installation failed. Command returned failure code 1 during SSH session 'root at 192.175.2.231' I found that right now on my oVirt Nodes in my test environment does not NOT connect to the internet... Basically, i need the offline repository to access from oVirt nodes without Internet access. Please guide us how to proceed Regards, Maghesh -------------- next part -------------- An HTML attachment was scrubbed... URL: From pbrilla at redhat.com Tue Apr 3 07:02:25 2018 From: pbrilla at redhat.com (Pavol Brilla) Date: Tue, 3 Apr 2018 09:02:25 +0200 Subject: [ovirt-users] Install oVirt node without Internet repository In-Reply-To: References: Message-ID: Ovirt-node should provide all you need as host on 1 ISO: https://www.ovirt.org/node/ On Mon, Apr 2, 2018 at 12:31 PM, G, Maghesh Kumar (Nokia - IN/Bangalore) < magheshkumar.g at nokia.com> wrote: > Hi > > > > Description of problem: > > Cannot add host - install fails & Install oVirt node without Internet repository > > > > Version: Ovirt-4.2 > > Host is installed with RHEL 7.4 > > > > Actual results: > > Host KVM02 installation failed. Command returned failure code 1 during SSH session 'root at 192.175.2.231' > > > > I found that right now on my oVirt Nodes in my test environment *does not > NOT connect to the internet.*.. > > Basically, i need the offline repository to access from oVirt nodes > without Internet access. > > > > Please guide us how to proceed > > > > Regards, > > Maghesh > > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -- PAVOL BRILLA RHV QUALITY ENGINEER, CLOUD Red Hat Czech Republic, Brno TRIED. TESTED. TRUSTED. -------------- next part -------------- An HTML attachment was scrubbed... URL: From pbrilla at redhat.com Tue Apr 3 07:14:45 2018 From: pbrilla at redhat.com (Pavol Brilla) Date: Tue, 3 Apr 2018 09:14:45 +0200 Subject: [ovirt-users] virtual machine actual size is not right In-Reply-To: References: Message-ID: Hi just small note why size of disk differs between ovirt and system: 30G in ovirt = 30*1024*1024*1024 bytes = 32212254720 bytes = 32.2GB which you see in parted output I dont know that much about storage to help with it and I can only cite from oVirt webpages[1]: Thin Provision allocates 1 GB at the time the virtual disk is created and sets a maximum limit on the size to which the disk can grow. The virtual size of the disk is the maximum limit; the actual size of the disk is the space that has been allocated so far. Thinly provisioned disks are faster to create than preallocated disks and allow for storage over-commitment. Thinly provisioned virtual disks are recommended for desktops. [1] https://www.ovirt.org/documentation/admin-guide/chap-Virtual_Machine_Disks/ On Tue, Mar 27, 2018 at 9:02 AM, Terry hey wrote: > Hello, thank you for helping me. > > On the storage domain size: > Alias: host1 > Disk: 1 > Template: Blank > Virtual Size: 30 GB > Actual Size: 13 GB > Creation Date: Jan 29,2018 11:22:54 AM > > On the server size: > # df -h > Filesystem Size Used Avail Use% Mounted on > /dev/mapper/vg01-root 10G 7.2G 2.9G 72% / > devtmpfs 1.9G 0 1.9G 0% /dev > tmpfs 1.9G 4.0K 1.9G 1% /dev/shm > tmpfs 1.9G 17M 1.9G 1% /run > tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup > /dev/sda1 1014M 188M 827M 19% /boot > /dev/mapper/vg01-var 15G 996M 15G 7% /var > XXX.XXX.XXX.XXX:/nfs_share 249G 96G 141G 41% /mnt/nfs_share > tmpfs 379M 0 379M 0% /run/user/0 > > # parted -l /dev/[sv]d[a-z] | grep ^Disk > Disk /dev/sda: 32.2GB > Disk Flags: > Disk /dev/mapper/vg01-var: 16.1GB > Disk Flags: > Disk /dev/mapper/vg01-swap: 2147MB > Disk Flags: > Disk /dev/mapper/vg01-root: 10.7GB > Disk Flags: > # > > It still not the same. Also, do you know the upper limitation for thin > provision? > For example, if i allocated 30 GB to the hosts, what is the upper > limitation that the host can use? > > Regards, > Terry > > 2018-03-23 18:45 GMT+08:00 Pavol Brilla : > >> Hi >> >> For such big difference between size outside of VM and inside, it looks >> more that disk is not fully partioned. >> df is providing you information only about mounted filesystems. >> Could you try to run inside VM should match all local disks, and you >> should see size of disk : >> # parted -l /dev/[sv]d[a-z] | grep ^Disk >> >> ( Output of 1 of my VMs ): >> # parted -l /dev/[sv]d[a-z] | grep ^Disk >> Disk /dev/sda: 26.8GB >> Disk Flags: >> Disk /dev/mapper/rootvg-lv_tmp: 2147MB >> Disk Flags: >> Disk /dev/mapper/rootvg-lv_home: 210MB >> Disk Flags: >> Disk /dev/mapper/rootvg-lv_swap: 2147MB >> Disk Flags: >> Disk /dev/mapper/rootvg-lv_root: 21.8GB >> >> So I see that VM has 26.8GB big disk. >> >> On Thu, Mar 22, 2018 at 5:56 PM, Terry hey wrote: >> >>> Hello~ >>> i type this command on the running vm, not the hypervisor ( ovirt node). >>> >> >> >> >> -- >> >> PAVOL BRILLA >> >> RHV QUALITY ENGINEER, CLOUD >> >> Red Hat Czech Republic, Brno >> >> TRIED. TESTED. TRUSTED. >> > > -- PAVOL BRILLA RHV QUALITY ENGINEER, CLOUD Red Hat Czech Republic, Brno TRIED. TESTED. TRUSTED. -------------- next part -------------- An HTML attachment was scrubbed... URL: From frolland at redhat.com Tue Apr 3 07:58:11 2018 From: frolland at redhat.com (Fred Rolland) Date: Tue, 3 Apr 2018 10:58:11 +0300 Subject: [ovirt-users] Fw: Data Operations On Any Host In-Reply-To: References: Message-ID: Jeremy, There is currently no option to restrict the data operations to specific hosts. You can disable this feature in the DB, disable "DataOperationsByHSM" in the vdc_options table. Note that since it is enabled by default since 4.1, all testing flows were done with this option. Regards, Fred On Sun, Apr 1, 2018 at 11:02 AM, Cryptic wrote: > Hi to all, > > In relation to the changes made to distribute data operations between all > the hosts in a data center rather than burden the SPM. I am very new to > oVirt and am having troubles finding information on this and need > assistance to prevent this happening on my development oVirt 4.2 system. > The issue I have is that I have a cluster which hosts all the storage > volumes using gluster and they have 10G NICs. I also have a separate > cluster which is virtualisation only and each host only has 3 x 1G > aggregated NICs. When I perform disk moves between storage domains it often > uses one of the virtualisation hosts which drastically increases the time > taken to move the disk. Can I restrict these types of operations to a set > of hosts or turn it off altogether so that it just uses the SPM like it > used to in the past. Distributing it is a great feature but unfortunately > is no good in my current setup. > > Regards, > Jeremy > > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From stirabos at redhat.com Tue Apr 3 08:06:41 2018 From: stirabos at redhat.com (Simone Tiraboschi) Date: Tue, 3 Apr 2018 10:06:41 +0200 Subject: [ovirt-users] hosted-engine Debug Help In-Reply-To: References: Message-ID: On Mon, Apr 2, 2018 at 4:52 PM, RabidCicada wrote: > Heyo everyone. I'm trying to debug hosted-engine --deploy. It is > failing in `Copy configuration archive to storage` in > `create_target_vm.yml` from `hosted-engine --deploy`. My general and > most important query here is how to get good debug output from ansible > through hosted-engine. I'm running hosted-engine through an ssh session. > > I can't figure out how to get good debug output from ansible within that > workflow. I see it's running through otopi, I tried setting typical > `debugger: on_failed` hooks etc and tried many incantations on the command line > and config files to get ansible to help me out. The debugger: directive > and other debugger related ansible config file stuff wouldn't result in any > debugger popping up. I also can't seem to pass normal -vvvv flags to > hosted-engine either and get it to ansible. Ultimately I tried to use a > `pause` directive and it complained that it was in a non-interactive > shell. I figured it might be the result of my ssh session so I enabled tty > allocation with -t -t. It did not resolve the issue. > > I eventually wrote-my-own/stole a callback_plugin that checks an > environmental variable and enables `display.verbosity = int(v)` since I > can't seem to pass typical -vvvv stuff to ansible through `hosted-engine > --deploy`. It give me the best info that I have so far. But it wont give > me enough to debug issues around Gathering Facts or what looks like a > sudo/permission problem in `Copy configuration archive to storage` in > `create_target_vm.yml`. I took and used the exact command that they use > manually and it works when I run it manually (But I can't get debug output > to show me the exact sudo command being executed), hence my interest in > passing -vvvv or equivalent to ansible through `hosted-engine`. I > intentionally disabled the VM_directory cleanup so that I could execute the > same stuff. > > So....after all that...what is a good way to get deep debug info from > hosted-engine ansible stuff? > You should already find all the relevant log entries in a file called /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-ansible-create_target_vm-{timestamp}-{hash}.log Can you please share it? > > Or does anyone have intuition for the possible sudo problem? > ~Kyle > > > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From bzlotnik at redhat.com Tue Apr 3 08:13:25 2018 From: bzlotnik at redhat.com (Benny Zlotnik) Date: Tue, 3 Apr 2018 11:13:25 +0300 Subject: [ovirt-users] Moving Templatexs In-Reply-To: <1b6bc924.1d3c82e.81252b2.29@mdaemon.com> References: <1b6bc924.1d3c82e.81252b2.29@mdaemon.com> Message-ID: Hi Bryan, You can go into the template -> storage tab -> select the disk and remove it there On Fri, Mar 30, 2018 at 4:50 PM, Bryan Sockel wrote: > Hi, > > > We are in the process of re-doing one of our storage domains. As part of > the process I needed to relocate my templates over to a temporary domain. > To do this, I copy the disk from one domain to another. In the past I have > been able to go into disk?s and remove the template disk from the storage > domain I no longer want it on. Now when I go in to storage -> Disks -> > -> Storage and select the storage domain I wish to > remove it from, the box is grayed out. > > > > Currently running Ovirt version 4.2.2.5-1.el7.centos > > > > > Thank You, > > > *Bryan Sockel* > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From spfma.tech at e.mail.fr Tue Apr 3 08:11:35 2018 From: spfma.tech at e.mail.fr (spfma.tech at e.mail.fr) Date: Tue, 03 Apr 2018 10:11:35 +0200 Subject: [ovirt-users] Persistent dummy interface Message-ID: <20180403081135.15678E446D@smtp01.mail.de> Hi, What is the right way to get a persistent dummy interface ? I need an internal network for lab purpoposes, so I created a dummy link "ip link add dummy_1 type dummy" and I was able to assign my logical network to it. But how to make it persistent ? Of course, after a reboot, the dummy device has gone and the server becomes non operational because of this non-compliant network. I have to recereate it by hand in order to get things work. Regards ------------------------------------------------------------------------------------------------- FreeMail powered by mail.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From apgriffiths79 at gmail.com Tue Apr 3 11:00:15 2018 From: apgriffiths79 at gmail.com (Alan Griffiths) Date: Tue, 3 Apr 2018 12:00:15 +0100 Subject: [ovirt-users] nfs 4.2 support Message-ID: Hi, I noticed that when mounting nfs domains in ovirt 4.1 using auto-negotiate it settles on v4.1. Is this due to lack of live storage migration as referenced in this bug https://bugzilla.redhat.com/show_bug.cgi?id=1464787 Are there other known issues with 4.2 support? Thanks, Alan From rabidcicada at gmail.com Tue Apr 3 11:29:16 2018 From: rabidcicada at gmail.com (RabidCicada) Date: Tue, 03 Apr 2018 11:29:16 +0000 Subject: [ovirt-users] Persistent dummy interface In-Reply-To: <20180403081135.15678E446D@smtp01.mail.de> References: <20180403081135.15678E446D@smtp01.mail.de> Message-ID: I do this on CentOS with /etc/modules-lomodules-loadad.d. You can stick a file in there that is basically just a bash script that loads your driver and then does the ip link command all the same time. On Tue, Apr 3, 2018, 4:20 AM wrote: > Hi, > What is the right way to get a persistent dummy interface ? > I need an internal network for lab purpoposes, so I created a dummy link > "ip link add dummy_1 type dummy" and I was able to assign my logical > network to it. > But how to make it persistent ? Of course, after a reboot, the dummy > device has gone and the server becomes non operational because of this > non-compliant network. I have to recereate it by hand in order to get > things work. > Regards > > ------------------------------ > FreeMail powered by mail.fr > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From 1523688226 at qq.com Tue Apr 3 11:22:32 2018 From: 1523688226 at qq.com (=?gb18030?B?VFQtbWFv?=) Date: Tue, 3 Apr 2018 19:22:32 +0800 Subject: [ovirt-users] =?gb18030?q?=A1=BEhelp=A1=BFBuild_a_local_developme?= =?gb18030?q?nt_environment?= Message-ID: Hi, guys: I am currently trying to build an ovirt development environment (including engine and vdsm) locally using official documentation, but it will never build successfully. First, I successfully built the rpm package through (https://www.ovirt.org/develop/developer-guide/vdsm/developers/) But the vdsm rpm package that I built can't be applied to the engine environment. Add hosts on the ovirt gui interface. The engine backend will reinstall vdsm. How do you create a local development environment? -------------- next part -------------- An HTML attachment was scrubbed... URL: From tbaror at gmail.com Tue Apr 3 09:48:00 2018 From: tbaror at gmail.com (Tal Bar-Or) Date: Tue, 3 Apr 2018 12:48:00 +0300 Subject: [ovirt-users] Issues with ZFS volume creation In-Reply-To: <1522745593476.36998@leedsbeckett.ac.uk> References: <1522745593476.36998@leedsbeckett.ac.uk> Message-ID: Hello All, Thanks for the answers, tried both don't work thanks On Tue, Apr 3, 2018 at 11:53 AM, Staniforth, Paul < P.Staniforth at leedsbeckett.ac.uk> wrote: > Hello Tal, > > ZFS is probably detecting a partition table on the disks, > you could delete the partition tables on /dev/sda,/dev/sdb ... etc, or you > could use the force option of ZFS create making sure they aren't mounted > somewhere. > > > Regards, > > Paul S. > ------------------------------ > *From:* users-bounces at ovirt.org on behalf of > Tal Bar-Or > *Sent:* 25 March 2018 15:54 > *To:* users > *Subject:* [ovirt-users] Issues with ZFS volume creation > > > Hello All, > I know this question is might be out of Ovirt scope, but I don't have > anywhere else to ask for this issue (ZFS users mailing doesn't work), so I > am trying my luck here anyway > so the issues go as follows : > > Installed ZFS on top of CentOs 7.4 with Ovirt 4.2 , on physical Dell R720 > with 15 sas 10 k 1.2TB each attached to PERC H310 adapter, disks are > configured to non-raid, all went OK, but when I am trying to create new zfs > pool using the following command: > > >> zpool create -m none -o ashift=12 zvol raidz2 sda sdb sdc sdd sde sdf sdg >> sdh sdi sdj sdk sdl sdm >> > I get the following error below: > >> /dev/sda is in use and contains a unknown filesystem. >> /dev/sdb is in use and contains a unknown filesystem. >> /dev/sdc is in use and contains a unknown filesystem. >> /dev/sdd is in use and contains a unknown filesystem. >> /dev/sde is in use and contains a unknown filesystem. >> /dev/sdf is in use and contains a unknown filesystem. >> /dev/sdg is in use and contains a unknown filesystem. >> /dev/sdh is in use and contains a unknown filesystem. >> /dev/sdi is in use and contains a unknown filesystem. >> /dev/sdj is in use and contains a unknown filesystem. >> /dev/sdk is in use and contains a unknown filesystem. >> /dev/sdl is in use and contains a unknown filesystem. >> /dev/sdm is in use and contains a unknown filesystem. >> > > When typing command lsblk I get the following output below, all seems ok, > any idea what could be wrong? > Please advice > Thanks > > # lsblk >> NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT >> sda 8:0 0 1.1T 0 disk >> ??35000cca07245c0ec 253:2 0 1.1T 0 mpath >> sdb 8:16 0 1.1T 0 disk >> ??35000cca072463898 253:10 0 1.1T 0 mpath >> sdc 8:32 0 1.1T 0 disk >> ??35000cca0724540e8 253:8 0 1.1T 0 mpath >> sdd 8:48 0 1.1T 0 disk >> ??35000cca072451b68 253:7 0 1.1T 0 mpath >> sde 8:64 0 1.1T 0 disk >> ??35000cca07245f578 253:3 0 1.1T 0 mpath >> sdf 8:80 0 1.1T 0 disk >> ??35000cca07246c568 253:11 0 1.1T 0 mpath >> sdg 8:96 0 1.1T 0 disk >> ??35000cca0724620c8 253:12 0 1.1T 0 mpath >> sdh 8:112 0 1.1T 0 disk >> ??35000cca07245d2b8 253:13 0 1.1T 0 mpath >> sdi 8:128 0 1.1T 0 disk >> ??35000cca07245f0e8 253:4 0 1.1T 0 mpath >> sdj 8:144 0 1.1T 0 disk >> ??35000cca072418958 253:5 0 1.1T 0 mpath >> sdk 8:160 0 1.1T 0 disk >> ??35000cca072429700 253:1 0 1.1T 0 mpath >> sdl 8:176 0 1.1T 0 disk >> ??35000cca07245d848 253:9 0 1.1T 0 mpath >> sdm 8:192 0 1.1T 0 disk >> ??35000cca0724625a8 253:0 0 1.1T 0 mpath >> sdn 8:208 0 1.1T 0 disk >> ??35000cca07245f5ac 253:6 0 1.1T 0 mpath > > > > -- > Tal Bar-or > To view the terms under which this email is distributed, please go to:- > http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html > > -- Tal Bar-or -------------- next part -------------- An HTML attachment was scrubbed... URL: From tomkcpr at mdevsys.com Tue Apr 3 12:12:58 2018 From: tomkcpr at mdevsys.com (TomK) Date: Tue, 3 Apr 2018 08:12:58 -0400 Subject: [ovirt-users] oVirt non-self-hosted HA Message-ID: <28fe034f-863a-2d11-71ff-836178171648@mdevsys.com> Hey Guy's, If I'm looking to setup the oVirt engine in an HA configuration off the physical servers hosting my VM's (non self hosted), what are my options here? I want to setup two to four active oVirt engine instances elsewhere and handle the HA via something like haproxy / keepalived to keep the entire experience seamless to the user. From what I've seen in oVirt, that seems to be possible without the two oVirt engines even knowing each other's existence but is it something anyone has ever done? Any recommendations in this case? Having settings replicated would be a bonus but I would be comfortable if they weren't and I handle that myself. -- Cheers, Tom K. ------------------------------------------------------------------------------------- Living on earth is expensive, but it includes a free trip around the sun. From P.Staniforth at leedsbeckett.ac.uk Tue Apr 3 08:53:13 2018 From: P.Staniforth at leedsbeckett.ac.uk (Staniforth, Paul) Date: Tue, 3 Apr 2018 08:53:13 +0000 Subject: [ovirt-users] Issues with ZFS volume creation In-Reply-To: References: Message-ID: <1522745593476.36998@leedsbeckett.ac.uk> Hello Tal, ZFS is probably detecting a partition table on the disks, you could delete the partition tables on /dev/sda,/dev/sdb ... etc, or you could use the force option of ZFS create making sure they aren't mounted somewhere. Regards, Paul S. ________________________________ From: users-bounces at ovirt.org on behalf of Tal Bar-Or Sent: 25 March 2018 15:54 To: users Subject: [ovirt-users] Issues with ZFS volume creation Hello All, I know this question is might be out of Ovirt scope, but I don't have anywhere else to ask for this issue (ZFS users mailing doesn't work), so I am trying my luck here anyway so the issues go as follows : Installed ZFS on top of CentOs 7.4 with Ovirt 4.2 , on physical Dell R720 with 15 sas 10 k 1.2TB each attached to PERC H310 adapter, disks are configured to non-raid, all went OK, but when I am trying to create new zfs pool using the following command: zpool create -m none -o ashift=12 zvol raidz2 sda sdb sdc sdd sde sdf sdg sdh sdi sdj sdk sdl sdm I get the following error below: /dev/sda is in use and contains a unknown filesystem. /dev/sdb is in use and contains a unknown filesystem. /dev/sdc is in use and contains a unknown filesystem. /dev/sdd is in use and contains a unknown filesystem. /dev/sde is in use and contains a unknown filesystem. /dev/sdf is in use and contains a unknown filesystem. /dev/sdg is in use and contains a unknown filesystem. /dev/sdh is in use and contains a unknown filesystem. /dev/sdi is in use and contains a unknown filesystem. /dev/sdj is in use and contains a unknown filesystem. /dev/sdk is in use and contains a unknown filesystem. /dev/sdl is in use and contains a unknown filesystem. /dev/sdm is in use and contains a unknown filesystem. When typing command lsblk I get the following output below, all seems ok, any idea what could be wrong? Please advice Thanks # lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 1.1T 0 disk ??35000cca07245c0ec 253:2 0 1.1T 0 mpath sdb 8:16 0 1.1T 0 disk ??35000cca072463898 253:10 0 1.1T 0 mpath sdc 8:32 0 1.1T 0 disk ??35000cca0724540e8 253:8 0 1.1T 0 mpath sdd 8:48 0 1.1T 0 disk ??35000cca072451b68 253:7 0 1.1T 0 mpath sde 8:64 0 1.1T 0 disk ??35000cca07245f578 253:3 0 1.1T 0 mpath sdf 8:80 0 1.1T 0 disk ??35000cca07246c568 253:11 0 1.1T 0 mpath sdg 8:96 0 1.1T 0 disk ??35000cca0724620c8 253:12 0 1.1T 0 mpath sdh 8:112 0 1.1T 0 disk ??35000cca07245d2b8 253:13 0 1.1T 0 mpath sdi 8:128 0 1.1T 0 disk ??35000cca07245f0e8 253:4 0 1.1T 0 mpath sdj 8:144 0 1.1T 0 disk ??35000cca072418958 253:5 0 1.1T 0 mpath sdk 8:160 0 1.1T 0 disk ??35000cca072429700 253:1 0 1.1T 0 mpath sdl 8:176 0 1.1T 0 disk ??35000cca07245d848 253:9 0 1.1T 0 mpath sdm 8:192 0 1.1T 0 disk ??35000cca0724625a8 253:0 0 1.1T 0 mpath sdn 8:208 0 1.1T 0 disk ??35000cca07245f5ac 253:6 0 1.1T 0 mpath -- Tal Bar-or To view the terms under which this email is distributed, please go to:- http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html -------------- next part -------------- An HTML attachment was scrubbed... URL: From johan at kafit.se Tue Apr 3 12:31:04 2018 From: johan at kafit.se (Johan Bernhardsson) Date: Tue, 03 Apr 2018 14:31:04 +0200 Subject: [ovirt-users] oVirt non-self-hosted HA In-Reply-To: <28fe034f-863a-2d11-71ff-836178171648@mdevsys.com> References: <28fe034f-863a-2d11-71ff-836178171648@mdevsys.com> Message-ID: <1628b7d3f40.2780.ffe2d6cdf294efc1bb86526523af9945@kafit.se> Hi, It's not entirely clear what you want to do. Ovirt is an interface that will control hardware nodes that runs virtual servers. It's similar to vmwares vsphere. The engine need to be replicated so that if one goes down the other have the exact same information. /Johan On April 3, 2018 14:16:14 TomK wrote: Hey Guy's, If I'm looking to setup the oVirt engine in an HA configuration off the physical servers hosting my VM's (non self hosted), what are my options here? I want to setup two to four active oVirt engine instances elsewhere and handle the HA via something like haproxy / keepalived to keep the entire experience seamless to the user. >From what I've seen in oVirt, that seems to be possible without the two oVirt engines even knowing each other's existence but is it something anyone has ever done? Any recommendations in this case? Having settings replicated would be a bonus but I would be comfortable if they weren't and I handle that myself. -- Cheers, Tom K. ------------------------------------------------------------------------------------- Living on earth is expensive, but it includes a free trip around the sun. _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users From fabrice.bacchella at orange.fr Tue Apr 3 12:42:08 2018 From: fabrice.bacchella at orange.fr (Fabrice Bacchella) Date: Tue, 3 Apr 2018 14:42:08 +0200 Subject: [ovirt-users] Issues with ZFS volume creation In-Reply-To: <1522745593476.36998@leedsbeckett.ac.uk> References: <1522745593476.36998@leedsbeckett.ac.uk> Message-ID: Or try to create the vdev on the multipath devices, what does lsblk -s says ? It will show you the top level device to be used. > Le 3 avr. 2018 ? 10:53, Staniforth, Paul a ?crit : > > Hello Tal, > ZFS is probably detecting a partition table on the disks, you could delete the partition tables on /dev/sda,/dev/sdb ... etc, or you could use the force option of ZFS create making sure they aren't mounted somewhere. > > Regards, > Paul S. > From: users-bounces at ovirt.org on behalf of Tal Bar-Or > Sent: 25 March 2018 15:54 > To: users > Subject: [ovirt-users] Issues with ZFS volume creation > > > Hello All, > I know this question is might be out of Ovirt scope, but I don't have anywhere else to ask for this issue (ZFS users mailing doesn't work), so I am trying my luck here anyway > so the issues go as follows : > > Installed ZFS on top of CentOs 7.4 with Ovirt 4.2 , on physical Dell R720 with 15 sas 10 k 1.2TB each attached to PERC H310 adapter, disks are configured to non-raid, all went OK, but when I am trying to create new zfs pool using the following command: > > zpool create -m none -o ashift=12 zvol raidz2 sda sdb sdc sdd sde sdf sdg sdh sdi sdj sdk sdl sdm > I get the following error below: > /dev/sda is in use and contains a unknown filesystem. > /dev/sdb is in use and contains a unknown filesystem. > /dev/sdc is in use and contains a unknown filesystem. > /dev/sdd is in use and contains a unknown filesystem. > /dev/sde is in use and contains a unknown filesystem. > /dev/sdf is in use and contains a unknown filesystem. > /dev/sdg is in use and contains a unknown filesystem. > /dev/sdh is in use and contains a unknown filesystem. > /dev/sdi is in use and contains a unknown filesystem. > /dev/sdj is in use and contains a unknown filesystem. > /dev/sdk is in use and contains a unknown filesystem. > /dev/sdl is in use and contains a unknown filesystem. > /dev/sdm is in use and contains a unknown filesystem. > > When typing command lsblk I get the following output below, all seems ok, any idea what could be wrong? > Please advice > Thanks > > # lsblk > NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT > sda 8:0 0 1.1T 0 disk > ??35000cca07245c0ec 253:2 0 1.1T 0 mpath > sdb 8:16 0 1.1T 0 disk > ??35000cca072463898 253:10 0 1.1T 0 mpath > sdc 8:32 0 1.1T 0 disk > ??35000cca0724540e8 253:8 0 1.1T 0 mpath > sdd 8:48 0 1.1T 0 disk > ??35000cca072451b68 253:7 0 1.1T 0 mpath > sde 8:64 0 1.1T 0 disk > ??35000cca07245f578 253:3 0 1.1T 0 mpath > sdf 8:80 0 1.1T 0 disk > ??35000cca07246c568 253:11 0 1.1T 0 mpath > sdg 8:96 0 1.1T 0 disk > ??35000cca0724620c8 253:12 0 1.1T 0 mpath > sdh 8:112 0 1.1T 0 disk > ??35000cca07245d2b8 253:13 0 1.1T 0 mpath > sdi 8:128 0 1.1T 0 disk > ??35000cca07245f0e8 253:4 0 1.1T 0 mpath > sdj 8:144 0 1.1T 0 disk > ??35000cca072418958 253:5 0 1.1T 0 mpath > sdk 8:160 0 1.1T 0 disk > ??35000cca072429700 253:1 0 1.1T 0 mpath > sdl 8:176 0 1.1T 0 disk > ??35000cca07245d848 253:9 0 1.1T 0 mpath > sdm 8:192 0 1.1T 0 disk > ??35000cca0724625a8 253:0 0 1.1T 0 mpath > sdn 8:208 0 1.1T 0 disk > ??35000cca07245f5ac 253:6 0 1.1T 0 mpath > > > -- > Tal Bar-or > To view the terms under which this email is distributed, please go to:- > http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users From ykaul at redhat.com Tue Apr 3 13:32:42 2018 From: ykaul at redhat.com (Yaniv Kaul) Date: Tue, 3 Apr 2018 16:32:42 +0300 Subject: [ovirt-users] oVirt non-self-hosted HA In-Reply-To: <28fe034f-863a-2d11-71ff-836178171648@mdevsys.com> References: <28fe034f-863a-2d11-71ff-836178171648@mdevsys.com> Message-ID: On Tue, Apr 3, 2018 at 3:12 PM, TomK wrote: > Hey Guy's, > > If I'm looking to setup the oVirt engine in an HA configuration off the > physical servers hosting my VM's (non self hosted), what are my options > here? > > I want to setup two to four active oVirt engine instances elsewhere and > handle the HA via something like haproxy / keepalived to keep the entire > experience seamless to the user. > You will need to set up the oVirt engine service as well as the PG database (and ovirt-engine-dwhd service and any other service we run next to the engine) as highly available module. In pacemaker[1], for example. You'll need to ensure configuration is also sync'ed between nodes, etc. Y. [1] https://clusterlabs.org/quickstart-redhat.html > > From what I've seen in oVirt, that seems to be possible without the two > oVirt engines even knowing each other's existence but is it something > anyone has ever done? Any recommendations in this case? > > Having settings replicated would be a bonus but I would be comfortable if > they weren't and I handle that myself. > > -- > Cheers, > Tom K. > ------------------------------------------------------------ > ------------------------- > > Living on earth is expensive, but it includes a free trip around the sun. > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jaymef at gmail.com Tue Apr 3 13:39:57 2018 From: jaymef at gmail.com (Jayme) Date: Tue, 3 Apr 2018 10:39:57 -0300 Subject: [ovirt-users] Why is host rebooted after updates, can it be disabled? Message-ID: I notice that almost every time I perform an oVirt host upgrade the host is automatically rebooted. Why is this done and is there a way to disable the automated reboot process? -------------- next part -------------- An HTML attachment was scrubbed... URL: From l.kamara at imperial.ac.uk Tue Apr 3 13:23:01 2018 From: l.kamara at imperial.ac.uk (Lloyd Kamara) Date: Tue, 3 Apr 2018 14:23:01 +0100 Subject: [ovirt-users] ISO uploading from GUI/REST with user permissions Message-ID: <96c9372b-bb7e-2140-e95b-f9819f3de40b@imperial.ac.uk> Dear Sir/Madam, The ability to upload ISOs through the web interface and boot VMs from them is a welcome addition in oVirt release 4.2.2. I am grateful to the people behind the implementation of this. Consider a scenario in which you wish to allow *end-users* to upload ISOs to one or more Data Domains. The users can then use the uploaded ISOs to boot their VMs. Is it possible to grant a user permission to upload ISOs through the web interface? I tried to to this under oVirt release 4.2.2 by doing the following: - adding the 'SuperUser' role to a target user for a specific Data Domain, which enables the user to log onto the Administration Portal. - adding the 'DiskCreator' role to the same target user for the same Data Domain, which, I would hope, would allow the user to both create disks and upload ISOs within that Data Domain. Disk creation in the Data Domain for the target user works as expected; ISO upload does not. A dialog appears with the message: 'Operation Canceled Error while executing action: User is not authorized to perform this action.' Here is the message that appears in /var/log/ovirt-engine/engine.log when an attempt at uploading an ISO is made by the target user: INFO [org.ovirt.engine.core.bll.storage.disk.image.TransferImageStatusCommand] (default task-40) [5b3fef06-49c8-4c34-81a3-a20fa691709a] No permission found for user 'a9fde4c3-97a3-4494-84f8-08041a16710c' or one of the groups he is member of, when running action 'TransferImageStatus', Required permissions are: Action type: 'USER' Action group: 'CREATE_DISK' Object type: 'System' Object ID: 'aaa00000-0000-0000-0000-123456789aaa'. If one assigns the DiskCreator role System permission for the target user then that user can upload ISOs without problem. Unfortunately, the user can upload ISOs - and create disks - in *all* data domains. To re-iterate, is it possible to grant an end-user permission to upload ISOs to specific data domains through the web interface without granting an all-encompassing System permission? Best wishes, Lloyd Kamara References: [The first two are included insofar as they concern ISO upload via web] https://bugzilla.redhat.com/show_bug.cgi?id=1530730 https://bugzilla.redhat.com/show_bug.cgi?id=1536826 [This one is included because I wonder if the testing requests includes the ability for users to upload ISOs via the web GUI, not just attach existing ISOs in data domains to VMs] https://bugzilla.redhat.com/show_bug.cgi?id=1058798 From fernando.frediani at upx.com Tue Apr 3 13:47:13 2018 From: fernando.frediani at upx.com (FERNANDO FREDIANI) Date: Tue, 3 Apr 2018 10:47:13 -0300 Subject: [ovirt-users] ovirt engine HA In-Reply-To: References: <20180403010709.24D5E19000CD@webmail.sinamail.sina.com.cn> Message-ID: Is it enough to deploy the Self-Hosted engine in just one Host of the cluster or is it necessary to repeat the process in each of the nodes that must be able to run it ? Thanks Fernando 2018-04-03 2:01 GMT-03:00 Vincent Royer : > Same thing, the engine in this case is "self-hosted", as in, it runs in a > VM hosted on the cluster that it is managing. I am a beginner here, but > from my understanding, each node is always checking on the health of the > engine VM. If the engine is missing (ie, the host running it has gone > down), then another available, healthy host will spawn up the engine and > you will regain access. > > In my experience this has worked very reliably. I have 2 hosts, both are > "able" to run the engine VM. If I take one host down, I am not able to > load the engine GUI. But if I wait a few minutes, then I regain access, > and see that the engine is now running on the remaining healthy host. > > *Vincent Royer* > *778-825-1057 <(778)%20825-1057>* > > > > *SUSTAINABLE MOBILE ENERGY SOLUTIONS* > > > > > On Mon, Apr 2, 2018 at 6:07 PM, wrote: > >> what different between self-hosted engine and hosted engine? I find a >> project ovirt-hosted-engine-ha >> https: >> //github.com/oVirt/ovirt-hosted-engine-ha >> ----- ???? ----- >> ????Vincent Royer >> ????dhy336 at sina.com >> ????users >> ???Re: [ovirt-users] ovirt engine HA >> ???2018?04?03? 08?57? >> >> If your node running self-hosted engine crashes, the hosted engine will >> be started up on another node. It just takes a few minutes for this all to >> happen, but it works reliably in my experience. >> >> >> >> On Mon, Apr 2, 2018 at 5:42 PM, wrote: >> >> How to solute ovirt engine HA, I have a three node cluster, one of is >> deploy engine and node , others are node, if node that deplay engine and >> node crash, How to ensure my server is up? >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> >> > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From pbrilla at redhat.com Tue Apr 3 14:02:52 2018 From: pbrilla at redhat.com (Pavol Brilla) Date: Tue, 3 Apr 2018 16:02:52 +0200 Subject: [ovirt-users] Why is host rebooted after updates, can it be disabled? In-Reply-To: References: Message-ID: It was introducted in 4.2 IIRC, in GUI it is checkbox which is by default on, cause during upgrade of host, not only oVirt packages are updated, but also systems ones in ansible role it was propagated : https://github.com/oVirt/ovirt-ansible-cluster-upgrade/pull/13 On Tue, Apr 3, 2018 at 3:39 PM, Jayme wrote: > I notice that almost every time I perform an oVirt host upgrade the host > is automatically rebooted. Why is this done and is there a way to disable > the automated reboot process? > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -- PAVOL BRILLA RHV QUALITY ENGINEER, CLOUD Red Hat Czech Republic, Brno TRIED. TESTED. TRUSTED. -------------- next part -------------- An HTML attachment was scrubbed... URL: From jaymef at gmail.com Tue Apr 3 14:58:46 2018 From: jaymef at gmail.com (Jayme) Date: Tue, 3 Apr 2018 11:58:46 -0300 Subject: [ovirt-users] Disable OVS? Message-ID: I'm constantly seeing this error in all of my host syslogs: ovs-vsctl: ovs|00001|db_ctl_base|ERR|unix:/var/run/openvswitch/db.sock: database connection failed (No such file or directory) My cluster is set to linux bridge and not using OVS. How can I stop the error message or disable ovs? -------------- next part -------------- An HTML attachment was scrubbed... URL: From stirabos at redhat.com Tue Apr 3 17:19:49 2018 From: stirabos at redhat.com (Simone Tiraboschi) Date: Tue, 3 Apr 2018 19:19:49 +0200 Subject: [ovirt-users] hosted-engine Debug Help In-Reply-To: References: Message-ID: On Tue, Apr 3, 2018 at 5:21 PM, RabidCicada wrote: > I've attached a full debug packet below. I include the log file from > ovirt-hosted-engine-setup. I include relevant cmd line info. I include > info from the command line where epdb has a breakpoint in playbook.py from > ansible itself. I also include info from commands I ran after it failed. > I also include attached the ferried over script in /root/.ansible/tmp that > is run. > > > *Output on cmd line:* > [ INFO ] TASK [Copy configuration archive to storage] > [ ERROR ] fatal: [localhost]: FAILED! => { > "changed": true, > "cmd": [ > "dd", > "bs=20480", > "count=1", > "oflag=direct", > "if=/var/tmp/localvmbCDQIR/5e > f881f5-c992-48d2-b969-a0b6156bdf7c", > "of=/rhev/data-center/mnt/nod > e.local:_srv_data/81292f3f-11d3-4e38-9afa-62e133aa8017/image > s/c5510e77-1ee0-479c-b6cf-24c179313a45/5ef881f5-c992- > 48d2-b969-a0b6156bdf7c" > ], > "delta": "0:00:00.004336", > "end": "2018-04-03 15:01:55.581823", > "invocation": { > "module_args": { > "_raw_params": "dd bs=20480 count=1 oflag=direct > if=\"/var/tmp/localvmbCDQIR/5ef881f5-c992-48d2-b969-a0b6156bdf7c\" > of=\"/rhev/data-center/mnt/node.local:_srv_data/81292f3f-11d > 3-4e38-9afa-62e133aa8017/images/c5510e77-1ee0-479c-b6cf- > 24c179313a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c\"", > "_uses_shell": false, > "chdir": null, > "creates": null, > "executable": null, > "removes": null, > "stdin": null, > "warn": true > } > }, > "msg": "non-zero return code", > "rc": 1, > "start": "2018-04-03 15:01:55.577487", > "stderr": "dd: failed to open ?/rhev/data-center/mnt/node.lo > cal:_srv_data/81292f3f-11d3-4e38-9afa-62e133aa8017/images/c5 > 510e77-1ee0-479c-b6cf-24c179313a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c?: > Permission denied", > "stderr_lines": [ > "dd: failed to open ?/rhev/data-center/mnt/node.lo > cal:_srv_data/81292f3f-11d3-4e38-9afa-62e133aa8017/images/c5 > 510e77-1ee0-479c-b6cf-24c179313a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c?: > Permission denied" > ], > "stdout": "", > "stdout_lines": [] > } > [ ERROR ] Failed to execute stage 'Closing up': Failed executing > ansible-playbook > In the playbook we have on that task: become_user: vdsm become_method: sudo but I fear it got somehow ignored. I'll investigate it. > > *Output from ansible epdb tracepoint:* > > Using module file /usr/lib/python2.7/site-packages/ansible/modules/ > commands/command.py > ESTABLISH LOCAL CONNECTION FOR USER: root > EXEC /bin/sh -c 'echo ~ && sleep 0' > EXEC /bin/sh -c '( umask 77 && mkdir -p "` echo > /root/.ansible/tmp/ansible-tmp-1522767715.36-81496549401055 `" && echo > ansible-tmp-1522767715.36-81496549401055="` echo > /root/.ansible/tmp/ansible-tmp-1522767715.36-81496549401055 `" ) && sleep > 0' > PUT /tmp/tmpGMGdjh TO /root/.ansible/tmp/ansible- > tmp-1522767715.36-81496549401055/command.py > EXEC /bin/sh -c 'chmod u+x /root/.ansible/tmp/ansible- > tmp-1522767715.36-81496549401055/ /root/.ansible/tmp/ansible- > tmp-1522767715.36-81496549401055/command.py && sleep 0' > EXEC /bin/sh -c '/usr/bin/python /root/.ansible/tmp/ansible- > tmp-1522767715.36-81496549401055/command.py && sleep 0' > to retry, use: --limit @/usr/share/ovirt-hosted- > engine-setup/ansible/create_target_vm.retry > > The above command.py is the on I have attached as problematic_command.py > > *Investigation After Failure:* > [root at node ~]# ls -al '/rhev/data-center/mnt/node.lo > cal:_srv_data/81292f3f-11d3-4e38-9afa-62e133aa8017/images/c5 > 510e77-1ee0-479c-b6cf-24c179313a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c' > -rw-rw----. 1 vdsm kvm 20480 Apr 3 15:01 /rhev/data-center/mnt/node.loc > al:_srv_data/81292f3f-11d3-4e38-9afa-62e133aa8017/images/c55 > 10e77-1ee0-479c-b6cf-24c179313a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c > > sudo -u vdsm dd bs=20480 count=1 oflag=direct > if="/var/tmp/localvmbCDQIR/5ef881f5-c992-48d2-b969-a0b6156bdf7c" > of="/rhev/data-center/mnt/node.local:_srv_data/81292f3f-11d3 > -4e38-9afa-62e133aa8017/images/c5510e77-1ee0-479c-b6cf- > 24c179313a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c > 1+0 records in > 1+0 records out > > > It seems to me that somehow it is not getting the right permissions even > though the playbook has: > - name: Copy configuration archive to storage > command: dd bs=20480 count=1 oflag=direct if="{{ LOCAL_VM_DIR }}/{{ > he_conf_disk_details.disk.image_id }}" of="{{ he_conf_disk_path }}" > become_user: vdsm > become_method: sudo > changed_when: True > tags: [ 'skip_ansible_lint' ] > > > On Tue, Apr 3, 2018 at 8:51 AM, RabidCicada wrote: > >> I am now also running with: >> >> export ANSIBLE_VERBOSITY=5 >> >> export ANSIBLE_FORKS=1 >> >> export ANSIBLE_KEEP_REMOTE_FILES=1 >> >> >> On Tue, Apr 3, 2018 at 8:49 AM, RabidCicada >> wrote: >> >>> Here's the log. >>> >>> So the command that it says it ran is: >>> dd bs=20480 count=1 oflag=direct if=/var/tmp/localvmHaWb6G/1cce >>> 8df2-1810-4063-b4e2-e19a2c5b1909 of=/rhev/data-center/mnt/node. >>> local:_srv_data/3c7485ea-14e3-40c1-b627-f89a819ed1d6/images/ >>> 2c1f7c2f-b8f7-46d4-ac66-8ff1e9649e29/1cce8df2-1810-4063-b4e2 >>> -e19a2c5b1909 >>> >>> But we all know that was done with: >>> >>> - name: Copy configuration archive to storage >>> command: dd bs=20480 count=1 oflag=direct if="{{ LOCAL_VM_DIR }}/{{ >>> he_conf_disk_details.disk.image_id }}" of="{{ he_conf_disk_path }}" >>> become_user: vdsm >>> become_method: sudo >>> changed_when: True >>> tags: [ 'skip_ansible_lint' ] >>> >>> So I manually replicated with `sudo vdsm dd bs=20480 count=1 >>> if=/var/tmp/localvmHaWb6G/1cce8df2-1810-4063-b4e2-e19a2c5b1909 >>> of=/rhev/data-center/mnt/node.local:_srv_data/3c7485ea-14e3- >>> 40c1-b627-f89a819ed1d6/images/2c1f7c2f-b8f7-46d4-ac66-8ff1e9 >>> 649e29/1cce8df2-1810-4063-b4e2-e19a2c5b1909` >>> >>> And it works when I manually do it. Though I think I didn't use the >>> oflag=direct (Just realised this) >>> >>> I eventually put a pause task directly preceeding it with debug output >>> that showed the file paths. I manually ran the command and it worked. >>> Then let it do it....failed. I checked all the permissions e.g. >>> vdsm:kvm. All looks good from a filesystem point of view. I'm beginning >>> (naively) to suspect a race condition for the file access problem...but >>> have come nowhere close to solving it. >>> >>> *Can you suggest a good way to continue executing the install process >>> from the create_target_vm.yml playbook (with proper variables and context >>> from otopi etc)?* I currently have to restart the entire process over >>> again and wait quite a while for it to circle back around. >>> >>> I have since discovered epdb and I've set breakpoints directly in >>> playbook.py of ansible just to see better log output. I insert epdb.serve >>> and use netcat to connect since epdb on python 2.7.5 and up seems to have >>> problems using epdb.connect() itself. >>> >>> ~Kyle >>> >>> On Tue, Apr 3, 2018 at 4:06 AM, Simone Tiraboschi >>> wrote: >>> >>>> >>>> >>>> On Mon, Apr 2, 2018 at 4:52 PM, RabidCicada >>>> wrote: >>>> >>>>> Heyo everyone. I'm trying to debug hosted-engine --deploy. It is >>>>> failing in `Copy configuration archive to storage` in >>>>> `create_target_vm.yml` from `hosted-engine --deploy`. My general and >>>>> most important query here is how to get good debug output from ansible >>>>> through hosted-engine. I'm running hosted-engine through an ssh session. >>>>> >>>>> I can't figure out how to get good debug output from ansible within >>>>> that workflow. I see it's running through otopi, I tried setting >>>>> typical `debugger: on_failed` hooks etc and tried many incantations on the >>>>> command line and config files to get ansible to help me out. The >>>>> debugger: directive and other debugger related ansible config file stuff >>>>> wouldn't result in any debugger popping up. I also can't seem to pass >>>>> normal -vvvv flags to hosted-engine either and get it to ansible. >>>>> Ultimately I tried to use a `pause` directive and it complained that it was >>>>> in a non-interactive shell. I figured it might be the result of my ssh >>>>> session so I enabled tty allocation with -t -t. It did not resolve the >>>>> issue. >>>>> >>>>> I eventually wrote-my-own/stole a callback_plugin that checks an >>>>> environmental variable and enables `display.verbosity = int(v)` since I >>>>> can't seem to pass typical -vvvv stuff to ansible through `hosted-engine >>>>> --deploy`. It give me the best info that I have so far. But it wont give >>>>> me enough to debug issues around Gathering Facts or what looks like a >>>>> sudo/permission problem in `Copy configuration archive to storage` in >>>>> `create_target_vm.yml`. I took and used the exact command that they use >>>>> manually and it works when I run it manually (But I can't get debug output >>>>> to show me the exact sudo command being executed), hence my interest in >>>>> passing -vvvv or equivalent to ansible through `hosted-engine`. I >>>>> intentionally disabled the VM_directory cleanup so that I could execute the >>>>> same stuff. >>>>> >>>>> So....after all that...what is a good way to get deep debug info from >>>>> hosted-engine ansible stuff? >>>>> >>>> >>>> You should already find all the relevant log entries in a file >>>> called /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engin >>>> e-setup-ansible-create_target_vm-{timestamp}-{hash}.log >>>> >>>> Can you please share it? >>>> >>>> >>>>> >>>>> Or does anyone have intuition for the possible sudo problem? >>>>> ~Kyle >>>>> >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> Users mailing list >>>>> Users at ovirt.org >>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>> >>>>> >>>> >>> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From rightkicktech at gmail.com Tue Apr 3 17:32:38 2018 From: rightkicktech at gmail.com (Alex K) Date: Tue, 3 Apr 2018 20:32:38 +0300 Subject: [ovirt-users] ovirt snapshot issue In-Reply-To: References: Message-ID: Hi All, Would appreciate for any ideas what to check further on the issue. Alex On Sun, Apr 1, 2018 at 9:04 PM, Alex K wrote: > Checking further the logs I see this error given from libvirt of the host > that has the guest VM running: > > Apr 1 17:53:41 v0 libvirtd: 2018-04-01 17:53:41.298+0000: 1862: warning : > qemuDomainObjBeginJobInternal:3847 : Cannot start job (query, none) for > domain Data-Server; current job is (async nested, snapshot) owned by (1863 > remoteDispatchDomainSnapshotCreateXML, 1863 remoteDispatchDomainSnapshotCreateXML) > for (39s, 41s) > Apr 1 17:53:41 v0 libvirtd: 2018-04-01 17:53:41.299+0000: 1862: error : > qemuDomainObjBeginJobInternal:3859 : Timed out during operation: cannot > acquire state change lock (held by remoteDispatchDomainSnapshotCreateXML) > Apr 1 17:53:57 v0 journal: vdsm Executor WARN Worker blocked: name=jsonrpc/3 running u'vmID': u'6bdb3d02-cc33-4019-97cd-7447aecc1e02', u'snapDrives': > [{u'baseVolumeID': u'adfabed5-451b-4f46-b22a-45f720b06110', u'domainID': > u'2c4b8d45-3d05-4619-9a36-1ecd199d3056', u'volumeID': > u'cc0d0772-924c-46db-8ad6-a2b0897c313f', u'imageID': > u'7eeadedc-f247-4a31-840d-4de622bf3541'}, {u'baseVolumeID': > u'0d960c12-3bcf-4918-896d-bd8e68b5278b', u'domainID': > u'2c4b8d45-3d05-4619-9a36-1ecd199d3056', u'volumeID': > u'590a6bdd-a9e2-444e-87bc-721c5f8586eb', u'imageID': > u'da0e4111-6bbe-43cb-bf59-db5fbf5c3e38'}]}, 'jsonrpc': '2.0', 'method': > u'VM.snapshot', 'id': u'be7912e6-ba3d-4357-8ba1-abe40825acf1'} at > 0x3bf84d0> timeout=60, duration=60 at 0x3bf8050> task#=416 at 0x20d7f90> > > > Immediately after above the engine reports the VM as unresponsive. > The SPM host does not log any issues. > > In the same time, the 3 hosts are fairly idle with only one running guest > VM. The gluster traffic is dedicated to a separate Gbit NIC of the servers > (dedicated VLAN) while the management network is on a separate network. The > gluster traffic does not exceed 40 Mbps during the snapshot operation. > Can't understand why libvirt is logging timeout. > > Alex > > On Thu, Mar 29, 2018 at 9:42 PM, Alex K wrote: > >> Any idea with this issue? >> I am still trying to understand what may be causing this issue. >> >> Many thanx for any assistance. >> >> Alex >> >> On Wed, Mar 28, 2018 at 10:06 AM, Yedidyah Bar David >> wrote: >> >>> On Tue, Mar 27, 2018 at 3:38 PM, Sandro Bonazzola >>> wrote: >>> >>>> >>>> >>>> 2018-03-27 14:34 GMT+02:00 Alex K : >>>> >>>>> Hi All, >>>>> >>>>> Any idea on the below? >>>>> >>>>> I am using oVirt Guest Tools 4.2-1.el7.centos for the VM. >>>>> The Window 2016 server VM (which it the one with the relatively big >>>>> disks: 500 GB) it is consistently rendered unresponsive when trying to get >>>>> a snapshot. >>>>> I amy provide any other additional logs if needed. >>>>> >>>> >>>> Adding some people to the thread >>>> >>> >>> Adding more people for this part. >>> >>> >>>> >>>> >>>> >>>>> >>>>> Alex >>>>> >>>>> On Sun, Mar 25, 2018 at 7:30 PM, Alex K >>>>> wrote: >>>>> >>>>>> Hi folks, >>>>>> >>>>>> I am facing frequently the following issue: >>>>>> >>>>>> On some large VMs (Windows 2016 with two disk drives, 60GB and 500GB) >>>>>> when attempting to create a snapshot of the VM, the VM becomes >>>>>> unresponsive. >>>>>> >>>>>> The errors that I managed to collect were: >>>>>> >>>>>> vdsm error at host hosting the VM: >>>>>> 2018-03-25 14:40:13,442+0000 WARN (vdsm.Scheduler) [Executor] Worker >>>>>> blocked: >>>>> {u'frozen': False, u'vmID': u'a5c761a2-41cd-40c2-b65f-f3819293e8a4', >>>>>> u'snapDrives': [{u'baseVolumeID': u'2a33e585-ece8-4f4d-b45d-5ecc9239200e', >>>>>> u'domainID': u'888e3aae-f49f-42f7-a7fa-76700befabea', u'volumeID': >>>>>> u'e9a01ebd-83dd-40c3-8c83-5302b0d15e04', u'imageID': >>>>>> u'c75b8e93-3067-4472-bf24-dafada224e4d'}, {u'baseVolumeID': >>>>>> u'3fb2278c-1b0d-4677-a529-99084e4b08af', u'domainID': >>>>>> u'888e3aae-f49f-42f7-a7fa-76700befabea', u'volumeID': >>>>>> u'78e6b6b1-2406-4393-8d92-831a6d4f1337', u'imageID': >>>>>> u'd4223744-bf5d-427b-bec2-f14b9bc2ef81'}]}, 'jsonrpc': '2.0', >>>>>> 'method': u'VM.snapshot', 'id': u'89555c87-9701-4260-9952-789965261e65'} >>>>>> at 0x7fca4004cc90> timeout=60, duration=60 at 0x39d8210> task#=155842 at >>>>>> 0x2240e10> (executor:351) >>>>>> 2018-03-25 14:40:15,261+0000 INFO (jsonrpc/3) >>>>>> [jsonrpc.JsonRpcServer] RPC call VM.getStats failed (error 1) in 0.01 >>>>>> seconds (__init__:539) >>>>>> 2018-03-25 14:40:17,471+0000 WARN (jsonrpc/5) [virt.vm] >>>>>> (vmId='a5c761a2-41cd-40c2-b65f-f3819293e8a4') monitor became >>>>>> unresponsive (command timeout, age=67.9100000001) (vm:5132) >>>>>> >>>>>> engine.log: >>>>>> 2018-03-25 14:40:19,875Z WARN [org.ovirt.engine.core.dal.dbb >>>>>> roker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler2) >>>>>> [1d737df7] EVENT_ID: VM_NOT_RESPONDING(126), Correlation ID: null, Call >>>>>> Stack: null, Custom ID: null, Custom Event ID: -1, Message: VM Data-Server >>>>>> is not responding. >>>>>> >>>>>> 2018-03-25 14:42:13,708Z ERROR [org.ovirt.engine.core.dal.dbb >>>>>> roker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler5) >>>>>> [17789048-009a-454b-b8ad-2c72c7cd37aa] EVENT_ID: >>>>>> VDS_BROKER_COMMAND_FAILURE(10,802), Correlation ID: null, Call >>>>>> Stack: null, Custom ID: null, Custom Event ID: -1, Message: VDSM v1.cluster >>>>>> command SnapshotVDS failed: Message timeout which can be caused by >>>>>> communication issues >>>>>> 2018-03-25 14:42:13,708Z ERROR [org.ovirt.engine.core.vdsbrok >>>>>> er.vdsbroker.SnapshotVDSCommand] (DefaultQuartzScheduler5) >>>>>> [17789048-009a-454b-b8ad-2c72c7cd37aa] Command >>>>>> 'SnapshotVDSCommand(HostName = v1.cluster, SnapshotVDSCommandParameters:{runAsync='true', >>>>>> hostId='a713d988-ee03-4ff0-a0cd-dc4cde1507f4', >>>>>> vmId='a5c761a2-41cd-40c2-b65f-f3819293e8a4'})' execution failed: >>>>>> VDSGenericException: VDSNetworkException: Message timeout which can be >>>>>> caused by communication issues >>>>>> 2018-03-25 14:42:13,708Z WARN [org.ovirt.engine.core.bll.sna >>>>>> pshots.CreateAllSnapshotsFromVmCommand] (DefaultQuartzScheduler5) >>>>>> [17789048-009a-454b-b8ad-2c72c7cd37aa] Could not perform live >>>>>> snapshot due to error, VM will still be configured to the new created >>>>>> snapshot: EngineException: org.ovirt.engine.core.vdsbroke >>>>>> r.vdsbroker.VDSNetworkException: VDSGenericException: >>>>>> VDSNetworkException: Message timeout which can be caused by communication >>>>>> issues (Failed with error VDS_NETWORK_ERROR and code 5022) >>>>>> 2018-03-25 14:42:13,708Z WARN [org.ovirt.engine.core.vdsbroker.VdsManager] >>>>>> (org.ovirt.thread.pool-6-thread-15) [17789048-009a-454b-b8ad-2c72c7cd37aa] >>>>>> Host 'v1.cluster' is not responding. It will stay in Connecting state for a >>>>>> grace period of 61 seconds and after that an attempt to fence the host will >>>>>> be issued. >>>>>> 2018-03-25 14:42:13,725Z WARN [org.ovirt.engine.core.dal.dbb >>>>>> roker.auditloghandling.AuditLogDirector] >>>>>> (org.ovirt.thread.pool-6-thread-15) [17789048-009a-454b-b8ad-2c72c7cd37aa] >>>>>> EVENT_ID: VDS_HOST_NOT_RESPONDING_CONNECTING(9,008), Correlation ID: >>>>>> null, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: Host >>>>>> v1.cluster is not responding. It will stay in Connecting state for a grace >>>>>> period of 61 seconds and after that an attempt to fence the host will be >>>>>> issued. >>>>>> 2018-03-25 14:42:13,751Z WARN [org.ovirt.engine.core.dal.dbb >>>>>> roker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler5) >>>>>> [17789048-009a-454b-b8ad-2c72c7cd37aa] EVENT_ID: >>>>>> USER_CREATE_LIVE_SNAPSHOT_FINISHED_FAILURE(170), Correlation ID: >>>>>> 17789048-009a-454b-b8ad-2c72c7cd37aa, Job ID: >>>>>> 16e48c28-a8c7-4841-bd81-1f2d370f345d, Call Stack: >>>>>> org.ovirt.engine.core.common.errors.EngineException: >>>>>> EngineException: org.ovirt.engine.core.vdsbroke >>>>>> r.vdsbroker.VDSNetworkException: VDSGenericException: >>>>>> VDSNetworkException: Message timeout which can be caused by communication >>>>>> issues (Failed with error VDS_NETWORK_ERROR and code 5022) >>>>>> 2018-03-25 14:42:14,372Z ERROR [org.ovirt.engine.core.dal.dbb >>>>>> roker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler5) >>>>>> [] EVENT_ID: USER_CREATE_SNAPSHOT_FINISHED_FAILURE(69), Correlation >>>>>> ID: 17789048-009a-454b-b8ad-2c72c7cd37aa, Job ID: >>>>>> 16e48c28-a8c7-4841-bd81-1f2d370f345d, Call Stack: >>>>>> org.ovirt.engine.core.common.errors.EngineException: >>>>>> EngineException: org.ovirt.engine.core.vdsbroke >>>>>> r.vdsbroker.VDSNetworkException: VDSGenericException: >>>>>> VDSNetworkException: Message timeout which can be caused by communication >>>>>> issues (Failed with error VDS_NETWORK_ERROR and code 5022) >>>>>> 2018-03-25 14:42:14,372Z WARN [org.ovirt.engine.core.bll.Con >>>>>> currentChildCommandsExecutionCallback] (DefaultQuartzScheduler5) [] >>>>>> Command 'CreateAllSnapshotsFromVm' id: 'bad4f5be-5306-413f-a86a-513b3cfd3c66' >>>>>> end method execution failed, as the command isn't marked for endAction() >>>>>> retries silently ignoring >>>>>> 2018-03-25 14:42:15,951Z WARN [org.ovirt.engine.core.dal.dbb >>>>>> roker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler5) >>>>>> [5017c163] EVENT_ID: VDS_NO_SELINUX_ENFORCEMENT(25), Correlation ID: >>>>>> null, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: Host >>>>>> v1.cluster does not enforce SELinux. Current status: DISABLED >>>>>> 2018-03-25 14:42:15,951Z WARN [org.ovirt.engine.core.vdsbroker.VdsManager] >>>>>> (DefaultQuartzScheduler5) [5017c163] Host 'v1.cluster' is running with >>>>>> SELinux in 'DISABLED' mode >>>>>> >>>>>> As soon as the VM is unresponsive, the VM console that was already >>>>>> open freezes. I can resume the VM only by powering off and on. >>>>>> >>>>>> I am using ovirt 4.1.9 with 3 nodes and self-hosted engine. I am >>>>>> running mostly Windows 10 and Windows 2016 server VMs. I have installed >>>>>> latest guest agents from: >>>>>> >>>>>> http://resources.ovirt.org/pub/ovirt-4.2/iso/oVirt-toolsSetu >>>>>> p/4.2-1.el7.centos/ >>>>>> >>>>>> At the screen where one takes a snapshot I get a warning saying >>>>>> "Could not detect guest agent on the VM. Note that without guest agent the >>>>>> data on the created snapshot may be inconsistent". See attached. I have >>>>>> verified that ovirt guest tools are installed and shown at installed apps >>>>>> at engine GUI. Also Ovirt Guest Agent (32 bit) and qemu-ga are listed as >>>>>> running at the windows tasks manager. Shouldn't ovirt guest agent be 64 bit >>>>>> on Windows 64 bit? >>>>>> >>>>> >>> No idea, but I do not think it's related to your problem of freezing >>> while taking a snapshot. >>> >>> This error was already discussed in the past, see e.g.: >>> >>> http://lists.ovirt.org/pipermail/users/2017-June/082577.html >>> >>> Best regards, >>> -- >>> Didi >>> >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From rightkicktech at gmail.com Tue Apr 3 17:39:40 2018 From: rightkicktech at gmail.com (Alex K) Date: Tue, 3 Apr 2018 20:39:40 +0300 Subject: [ovirt-users] ovirt engine HA In-Reply-To: References: <20180403010709.24D5E19000CD@webmail.sinamail.sina.com.cn> Message-ID: In case you need HA for the engine you need to deploy it to other hosts also through the GUI. On Tue, Apr 3, 2018 at 4:47 PM, FERNANDO FREDIANI wrote: > Is it enough to deploy the Self-Hosted engine in just one Host of the > cluster or is it necessary to repeat the process in each of the nodes that > must be able to run it ? > > Thanks > Fernando > > 2018-04-03 2:01 GMT-03:00 Vincent Royer : > >> Same thing, the engine in this case is "self-hosted", as in, it runs in a >> VM hosted on the cluster that it is managing. I am a beginner here, but >> from my understanding, each node is always checking on the health of the >> engine VM. If the engine is missing (ie, the host running it has gone >> down), then another available, healthy host will spawn up the engine and >> you will regain access. >> >> In my experience this has worked very reliably. I have 2 hosts, both are >> "able" to run the engine VM. If I take one host down, I am not able to >> load the engine GUI. But if I wait a few minutes, then I regain access, >> and see that the engine is now running on the remaining healthy host. >> >> *Vincent Royer* >> *778-825-1057 <(778)%20825-1057>* >> >> >> >> *SUSTAINABLE MOBILE ENERGY SOLUTIONS* >> >> >> >> >> On Mon, Apr 2, 2018 at 6:07 PM, wrote: >> >>> what different between self-hosted engine and hosted engine? I find a >>> project ovirt-hosted-engine-ha >>> https: >>> //github.com/oVirt/ovirt-hosted-engine-ha >>> ----- ???? ----- >>> ????Vincent Royer >>> ????dhy336 at sina.com >>> ????users >>> ???Re: [ovirt-users] ovirt engine HA >>> ???2018?04?03? 08?57? >>> >>> If your node running self-hosted engine crashes, the hosted engine will >>> be started up on another node. It just takes a few minutes for this all to >>> happen, but it works reliably in my experience. >>> >>> >>> >>> On Mon, Apr 2, 2018 at 5:42 PM, wrote: >>> >>> How to solute ovirt engine HA, I have a three node cluster, one of is >>> deploy engine and node , others are node, if node that deplay engine and >>> node crash, How to ensure my server is up? >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >>> >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From ykaul at redhat.com Tue Apr 3 17:54:47 2018 From: ykaul at redhat.com (Yaniv Kaul) Date: Tue, 3 Apr 2018 20:54:47 +0300 Subject: [ovirt-users] ovirt snapshot issue In-Reply-To: References: Message-ID: On Sun, Apr 1, 2018 at 9:04 PM, Alex K wrote: > Checking further the logs I see this error given from libvirt of the host > that has the guest VM running: > > Apr 1 17:53:41 v0 libvirtd: 2018-04-01 17:53:41.298+0000: 1862: warning : > qemuDomainObjBeginJobInternal:3847 : Cannot start job (query, none) for > domain Data-Server; current job is (async nested, snapshot) owned by (1863 > remoteDispatchDomainSnapshotCreateXML, 1863 remoteDispatchDomainSnapshotCreateXML) > for (39s, 41s) > Apr 1 17:53:41 v0 libvirtd: 2018-04-01 17:53:41.299+0000: 1862: error : > qemuDomainObjBeginJobInternal:3859 : Timed out during operation: cannot > acquire state change lock (held by remoteDispatchDomainSnapshotCreateXML) > Apr 1 17:53:57 v0 journal: vdsm Executor WARN Worker blocked: name=jsonrpc/3 running u'vmID': u'6bdb3d02-cc33-4019-97cd-7447aecc1e02', u'snapDrives': > [{u'baseVolumeID': u'adfabed5-451b-4f46-b22a-45f720b06110', u'domainID': > u'2c4b8d45-3d05-4619-9a36-1ecd199d3056', u'volumeID': > u'cc0d0772-924c-46db-8ad6-a2b0897c313f', u'imageID': > u'7eeadedc-f247-4a31-840d-4de622bf3541'}, {u'baseVolumeID': > u'0d960c12-3bcf-4918-896d-bd8e68b5278b', u'domainID': > u'2c4b8d45-3d05-4619-9a36-1ecd199d3056', u'volumeID': > u'590a6bdd-a9e2-444e-87bc-721c5f8586eb', u'imageID': > u'da0e4111-6bbe-43cb-bf59-db5fbf5c3e38'}]}, 'jsonrpc': '2.0', 'method': > u'VM.snapshot', 'id': u'be7912e6-ba3d-4357-8ba1-abe40825acf1'} at > 0x3bf84d0> timeout=60, duration=60 at 0x3bf8050> task#=416 at 0x20d7f90> > > > Immediately after above the engine reports the VM as unresponsive. > If it's reproducible, it'd be great if you could: 1. Run libvirt with debug logs 2. Get a dump of libvirt when this happens (with gstack for example). 3. File a bug on libvirt. Thanks, Y. > The SPM host does not log any issues. > > In the same time, the 3 hosts are fairly idle with only one running guest > VM. The gluster traffic is dedicated to a separate Gbit NIC of the servers > (dedicated VLAN) while the management network is on a separate network. The > gluster traffic does not exceed 40 Mbps during the snapshot operation. > Can't understand why libvirt is logging timeout. > > Alex > > On Thu, Mar 29, 2018 at 9:42 PM, Alex K wrote: > >> Any idea with this issue? >> I am still trying to understand what may be causing this issue. >> >> Many thanx for any assistance. >> >> Alex >> >> On Wed, Mar 28, 2018 at 10:06 AM, Yedidyah Bar David >> wrote: >> >>> On Tue, Mar 27, 2018 at 3:38 PM, Sandro Bonazzola >>> wrote: >>> >>>> >>>> >>>> 2018-03-27 14:34 GMT+02:00 Alex K : >>>> >>>>> Hi All, >>>>> >>>>> Any idea on the below? >>>>> >>>>> I am using oVirt Guest Tools 4.2-1.el7.centos for the VM. >>>>> The Window 2016 server VM (which it the one with the relatively big >>>>> disks: 500 GB) it is consistently rendered unresponsive when trying to get >>>>> a snapshot. >>>>> I amy provide any other additional logs if needed. >>>>> >>>> >>>> Adding some people to the thread >>>> >>> >>> Adding more people for this part. >>> >>> >>>> >>>> >>>> >>>>> >>>>> Alex >>>>> >>>>> On Sun, Mar 25, 2018 at 7:30 PM, Alex K >>>>> wrote: >>>>> >>>>>> Hi folks, >>>>>> >>>>>> I am facing frequently the following issue: >>>>>> >>>>>> On some large VMs (Windows 2016 with two disk drives, 60GB and 500GB) >>>>>> when attempting to create a snapshot of the VM, the VM becomes >>>>>> unresponsive. >>>>>> >>>>>> The errors that I managed to collect were: >>>>>> >>>>>> vdsm error at host hosting the VM: >>>>>> 2018-03-25 14:40:13,442+0000 WARN (vdsm.Scheduler) [Executor] Worker >>>>>> blocked: >>>>> {u'frozen': False, u'vmID': u'a5c761a2-41cd-40c2-b65f-f3819293e8a4', >>>>>> u'snapDrives': [{u'baseVolumeID': u'2a33e585-ece8-4f4d-b45d-5ecc9239200e', >>>>>> u'domainID': u'888e3aae-f49f-42f7-a7fa-76700befabea', u'volumeID': >>>>>> u'e9a01ebd-83dd-40c3-8c83-5302b0d15e04', u'imageID': >>>>>> u'c75b8e93-3067-4472-bf24-dafada224e4d'}, {u'baseVolumeID': >>>>>> u'3fb2278c-1b0d-4677-a529-99084e4b08af', u'domainID': >>>>>> u'888e3aae-f49f-42f7-a7fa-76700befabea', u'volumeID': >>>>>> u'78e6b6b1-2406-4393-8d92-831a6d4f1337', u'imageID': >>>>>> u'd4223744-bf5d-427b-bec2-f14b9bc2ef81'}]}, 'jsonrpc': '2.0', >>>>>> 'method': u'VM.snapshot', 'id': u'89555c87-9701-4260-9952-789965261e65'} >>>>>> at 0x7fca4004cc90> timeout=60, duration=60 at 0x39d8210> task#=155842 at >>>>>> 0x2240e10> (executor:351) >>>>>> 2018-03-25 14:40:15,261+0000 INFO (jsonrpc/3) >>>>>> [jsonrpc.JsonRpcServer] RPC call VM.getStats failed (error 1) in 0.01 >>>>>> seconds (__init__:539) >>>>>> 2018-03-25 14:40:17,471+0000 WARN (jsonrpc/5) [virt.vm] >>>>>> (vmId='a5c761a2-41cd-40c2-b65f-f3819293e8a4') monitor became >>>>>> unresponsive (command timeout, age=67.9100000001) (vm:5132) >>>>>> >>>>>> engine.log: >>>>>> 2018-03-25 14:40:19,875Z WARN [org.ovirt.engine.core.dal.dbb >>>>>> roker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler2) >>>>>> [1d737df7] EVENT_ID: VM_NOT_RESPONDING(126), Correlation ID: null, Call >>>>>> Stack: null, Custom ID: null, Custom Event ID: -1, Message: VM Data-Server >>>>>> is not responding. >>>>>> >>>>>> 2018-03-25 14:42:13,708Z ERROR [org.ovirt.engine.core.dal.dbb >>>>>> roker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler5) >>>>>> [17789048-009a-454b-b8ad-2c72c7cd37aa] EVENT_ID: >>>>>> VDS_BROKER_COMMAND_FAILURE(10,802), Correlation ID: null, Call >>>>>> Stack: null, Custom ID: null, Custom Event ID: -1, Message: VDSM v1.cluster >>>>>> command SnapshotVDS failed: Message timeout which can be caused by >>>>>> communication issues >>>>>> 2018-03-25 14:42:13,708Z ERROR [org.ovirt.engine.core.vdsbrok >>>>>> er.vdsbroker.SnapshotVDSCommand] (DefaultQuartzScheduler5) >>>>>> [17789048-009a-454b-b8ad-2c72c7cd37aa] Command >>>>>> 'SnapshotVDSCommand(HostName = v1.cluster, SnapshotVDSCommandParameters:{runAsync='true', >>>>>> hostId='a713d988-ee03-4ff0-a0cd-dc4cde1507f4', >>>>>> vmId='a5c761a2-41cd-40c2-b65f-f3819293e8a4'})' execution failed: >>>>>> VDSGenericException: VDSNetworkException: Message timeout which can be >>>>>> caused by communication issues >>>>>> 2018-03-25 14:42:13,708Z WARN [org.ovirt.engine.core.bll.sna >>>>>> pshots.CreateAllSnapshotsFromVmCommand] (DefaultQuartzScheduler5) >>>>>> [17789048-009a-454b-b8ad-2c72c7cd37aa] Could not perform live >>>>>> snapshot due to error, VM will still be configured to the new created >>>>>> snapshot: EngineException: org.ovirt.engine.core.vdsbroke >>>>>> r.vdsbroker.VDSNetworkException: VDSGenericException: >>>>>> VDSNetworkException: Message timeout which can be caused by communication >>>>>> issues (Failed with error VDS_NETWORK_ERROR and code 5022) >>>>>> 2018-03-25 14:42:13,708Z WARN [org.ovirt.engine.core.vdsbroker.VdsManager] >>>>>> (org.ovirt.thread.pool-6-thread-15) [17789048-009a-454b-b8ad-2c72c7cd37aa] >>>>>> Host 'v1.cluster' is not responding. It will stay in Connecting state for a >>>>>> grace period of 61 seconds and after that an attempt to fence the host will >>>>>> be issued. >>>>>> 2018-03-25 14:42:13,725Z WARN [org.ovirt.engine.core.dal.dbb >>>>>> roker.auditloghandling.AuditLogDirector] >>>>>> (org.ovirt.thread.pool-6-thread-15) [17789048-009a-454b-b8ad-2c72c7cd37aa] >>>>>> EVENT_ID: VDS_HOST_NOT_RESPONDING_CONNECTING(9,008), Correlation ID: >>>>>> null, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: Host >>>>>> v1.cluster is not responding. It will stay in Connecting state for a grace >>>>>> period of 61 seconds and after that an attempt to fence the host will be >>>>>> issued. >>>>>> 2018-03-25 14:42:13,751Z WARN [org.ovirt.engine.core.dal.dbb >>>>>> roker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler5) >>>>>> [17789048-009a-454b-b8ad-2c72c7cd37aa] EVENT_ID: >>>>>> USER_CREATE_LIVE_SNAPSHOT_FINISHED_FAILURE(170), Correlation ID: >>>>>> 17789048-009a-454b-b8ad-2c72c7cd37aa, Job ID: >>>>>> 16e48c28-a8c7-4841-bd81-1f2d370f345d, Call Stack: >>>>>> org.ovirt.engine.core.common.errors.EngineException: >>>>>> EngineException: org.ovirt.engine.core.vdsbroke >>>>>> r.vdsbroker.VDSNetworkException: VDSGenericException: >>>>>> VDSNetworkException: Message timeout which can be caused by communication >>>>>> issues (Failed with error VDS_NETWORK_ERROR and code 5022) >>>>>> 2018-03-25 14:42:14,372Z ERROR [org.ovirt.engine.core.dal.dbb >>>>>> roker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler5) >>>>>> [] EVENT_ID: USER_CREATE_SNAPSHOT_FINISHED_FAILURE(69), Correlation >>>>>> ID: 17789048-009a-454b-b8ad-2c72c7cd37aa, Job ID: >>>>>> 16e48c28-a8c7-4841-bd81-1f2d370f345d, Call Stack: >>>>>> org.ovirt.engine.core.common.errors.EngineException: >>>>>> EngineException: org.ovirt.engine.core.vdsbroke >>>>>> r.vdsbroker.VDSNetworkException: VDSGenericException: >>>>>> VDSNetworkException: Message timeout which can be caused by communication >>>>>> issues (Failed with error VDS_NETWORK_ERROR and code 5022) >>>>>> 2018-03-25 14:42:14,372Z WARN [org.ovirt.engine.core.bll.Con >>>>>> currentChildCommandsExecutionCallback] (DefaultQuartzScheduler5) [] >>>>>> Command 'CreateAllSnapshotsFromVm' id: 'bad4f5be-5306-413f-a86a-513b3cfd3c66' >>>>>> end method execution failed, as the command isn't marked for endAction() >>>>>> retries silently ignoring >>>>>> 2018-03-25 14:42:15,951Z WARN [org.ovirt.engine.core.dal.dbb >>>>>> roker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler5) >>>>>> [5017c163] EVENT_ID: VDS_NO_SELINUX_ENFORCEMENT(25), Correlation ID: >>>>>> null, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: Host >>>>>> v1.cluster does not enforce SELinux. Current status: DISABLED >>>>>> 2018-03-25 14:42:15,951Z WARN [org.ovirt.engine.core.vdsbroker.VdsManager] >>>>>> (DefaultQuartzScheduler5) [5017c163] Host 'v1.cluster' is running with >>>>>> SELinux in 'DISABLED' mode >>>>>> >>>>>> As soon as the VM is unresponsive, the VM console that was already >>>>>> open freezes. I can resume the VM only by powering off and on. >>>>>> >>>>>> I am using ovirt 4.1.9 with 3 nodes and self-hosted engine. I am >>>>>> running mostly Windows 10 and Windows 2016 server VMs. I have installed >>>>>> latest guest agents from: >>>>>> >>>>>> http://resources.ovirt.org/pub/ovirt-4.2/iso/oVirt-toolsSetu >>>>>> p/4.2-1.el7.centos/ >>>>>> >>>>>> At the screen where one takes a snapshot I get a warning saying >>>>>> "Could not detect guest agent on the VM. Note that without guest agent the >>>>>> data on the created snapshot may be inconsistent". See attached. I have >>>>>> verified that ovirt guest tools are installed and shown at installed apps >>>>>> at engine GUI. Also Ovirt Guest Agent (32 bit) and qemu-ga are listed as >>>>>> running at the windows tasks manager. Shouldn't ovirt guest agent be 64 bit >>>>>> on Windows 64 bit? >>>>>> >>>>> >>> No idea, but I do not think it's related to your problem of freezing >>> while taking a snapshot. >>> >>> This error was already discussed in the past, see e.g.: >>> >>> http://lists.ovirt.org/pipermail/users/2017-June/082577.html >>> >>> Best regards, >>> -- >>> Didi >>> >> >> > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From magheshkumar.g at nokia.com Tue Apr 3 18:29:49 2018 From: magheshkumar.g at nokia.com (G, Maghesh Kumar (Nokia - IN/Bangalore)) Date: Tue, 3 Apr 2018 18:29:49 +0000 Subject: [ovirt-users] Install oVirt node without Internet repository In-Reply-To: References: Message-ID: Hi, As guided I have installed ovirt-node using 1 ISO image. But still we have same issue. Please find attached log for your debugging. Also would like to tell SSH from ovirt engine node to ovirt node is working fine. From:Ovirt Engine Server [root at ovrit-mgmt host-deploy]# [root at ovrit-mgmt host-deploy]# ssh 192.175.2.234 root at 192.175.2.234's password: Last login: Tue Apr 3 19:11:03 2018 from ovirt-mgmt.banone.nsn-rdnet.net node status: OK See `nodectl check` for more information Admin Console: https://192.175.2.234:9090/ [root at kvm04 ~]# From: Ovirt Node [root at kvm04 log]# ssh 192.175.2.234 The authenticity of host '192.175.2.234 (192.175.2.234)' can't be established. ECDSA key fingerprint is SHA256:rlMHEDBvLz6GK0LQh2n8blEdwYPtMGnl8Hzw3Mo2PMQ. ECDSA key fingerprint is MD5:3a:69:2b:2c:87:c7:3c:55:3d:13:b8:b1:ac:bd:e7:6a. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '192.175.2.234' (ECDSA) to the list of known hosts. root at 192.175.2.234's password: Last login: Tue Apr 3 19:25:43 2018 from ovirt-mgmt.banone.nsn-rdnet.net node status: OK See `nodectl check` for more information Admin Console: https://192.175.2.234:9090/ [root at kvm04 ~]# Repository: Still repository is pointing to internet [root at kvm04 ~]# cd /etc/yum.repos.d/ [root at kvm04 yum.repos.d]# ls -ltr total 40 -rw-r--r--. 1 root root 308 Mar 29 11:42 ovirt-4.2.repo -rw-r--r--. 1 root root 2571 Mar 29 11:42 ovirt-4.2-dependencies.repo -rw-r--r--. 1 root root 367 Mar 29 11:42 cockpit-preview-epel-7.repo -rw-r--r--. 1 root root 3830 Mar 29 11:42 CentOS-Vault.repo -rw-r--r--. 1 root root 1331 Mar 29 11:42 CentOS-Sources.repo -rw-r--r--. 1 root root 630 Mar 29 11:42 CentOS-Media.repo -rw-r--r--. 1 root root 314 Mar 29 11:42 CentOS-fasttrack.repo -rw-r--r--. 1 root root 1309 Mar 29 11:42 CentOS-CR.repo -rw-r--r--. 1 root root 649 Mar 29 11:42 CentOS-Debuginfo.repo -rw-r--r--. 1 root root 1694 Mar 29 11:42 CentOS-Base.repo [root at kvm04 yum.repos.d]# Regards, Maghesh From: Pavol Brilla [mailto:pbrilla at redhat.com] Sent: Tuesday, April 03, 2018 12:32 PM To: G, Maghesh Kumar (Nokia - IN/Bangalore) Cc: users at ovirt.org; infra at ovirt.org Subject: Re: [ovirt-users] Install oVirt node without Internet repository Ovirt-node should provide all you need as host on 1 ISO: https://www.ovirt.org/node/ On Mon, Apr 2, 2018 at 12:31 PM, G, Maghesh Kumar (Nokia - IN/Bangalore) > wrote: Hi Description of problem: Cannot add host - install fails & Install oVirt node without Internet repository Version: Ovirt-4.2 Host is installed with RHEL 7.4 Actual results: Host KVM02 installation failed. Command returned failure code 1 during SSH session 'root at 192.175.2.231' I found that right now on my oVirt Nodes in my test environment does not NOT connect to the internet... Basically, i need the offline repository to access from oVirt nodes without Internet access. Please guide us how to proceed Regards, Maghesh _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- PAVOL BRILLA RHV QUALITY ENGINEER, CLOUD Red Hat Czech Republic, Brno [https://www.redhat.com/files/brand/email/sig-redhat.png] TRIED. TESTED. TRUSTED. -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: ovirt-host-deploy-20180403233920-192.175.2.234-84afb288-0d03-487c-a2f1-2e50f84d6451.log Type: application/octet-stream Size: 189826 bytes Desc: ovirt-host-deploy-20180403233920-192.175.2.234-84afb288-0d03-487c-a2f1-2e50f84d6451.log URL: From rabidcicada at gmail.com Tue Apr 3 19:08:20 2018 From: rabidcicada at gmail.com (RabidCicada) Date: Tue, 3 Apr 2018 15:08:20 -0400 Subject: [ovirt-users] hosted-engine Debug Help In-Reply-To: References: Message-ID: Alright. By differential comparing to successfull postgres-command sudo-becomes. It looks like the salient difference is that `Copy configuration archive to storage` is missing become:true. Testing now. The similar postgres commands have become:true while this one does not. ~Kyle On Tue, Apr 3, 2018 at 1:19 PM, Simone Tiraboschi wrote: > > > On Tue, Apr 3, 2018 at 5:21 PM, RabidCicada wrote: > >> I've attached a full debug packet below. I include the log file from >> ovirt-hosted-engine-setup. I include relevant cmd line info. I include >> info from the command line where epdb has a breakpoint in playbook.py from >> ansible itself. I also include info from commands I ran after it failed. >> I also include attached the ferried over script in /root/.ansible/tmp that >> is run. >> >> >> *Output on cmd line:* >> [ INFO ] TASK [Copy configuration archive to storage] >> [ ERROR ] fatal: [localhost]: FAILED! => { >> "changed": true, >> "cmd": [ >> "dd", >> "bs=20480", >> "count=1", >> "oflag=direct", >> "if=/var/tmp/localvmbCDQIR/5e >> f881f5-c992-48d2-b969-a0b6156bdf7c", >> "of=/rhev/data-center/mnt/nod >> e.local:_srv_data/81292f3f-11d3-4e38-9afa-62e133aa8017/image >> s/c5510e77-1ee0-479c-b6cf-24c179313a45/5ef881f5-c992-48d2- >> b969-a0b6156bdf7c" >> ], >> "delta": "0:00:00.004336", >> "end": "2018-04-03 15:01:55.581823", >> "invocation": { >> "module_args": { >> "_raw_params": "dd bs=20480 count=1 oflag=direct >> if=\"/var/tmp/localvmbCDQIR/5ef881f5-c992-48d2-b969-a0b6156bdf7c\" >> of=\"/rhev/data-center/mnt/node.local:_srv_data/81292f3f-11d >> 3-4e38-9afa-62e133aa8017/images/c5510e77-1ee0-479c-b6cf-24c1 >> 79313a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c\"", >> "_uses_shell": false, >> "chdir": null, >> "creates": null, >> "executable": null, >> "removes": null, >> "stdin": null, >> "warn": true >> } >> }, >> "msg": "non-zero return code", >> "rc": 1, >> "start": "2018-04-03 15:01:55.577487", >> "stderr": "dd: failed to open ?/rhev/data-center/mnt/node.lo >> cal:_srv_data/81292f3f-11d3-4e38-9afa-62e133aa8017/images/c5 >> 510e77-1ee0-479c-b6cf-24c179313a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c?: >> Permission denied", >> "stderr_lines": [ >> "dd: failed to open ?/rhev/data-center/mnt/node.lo >> cal:_srv_data/81292f3f-11d3-4e38-9afa-62e133aa8017/images/c5 >> 510e77-1ee0-479c-b6cf-24c179313a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c?: >> Permission denied" >> ], >> "stdout": "", >> "stdout_lines": [] >> } >> [ ERROR ] Failed to execute stage 'Closing up': Failed executing >> ansible-playbook >> > > In the playbook we have on that task: > become_user: vdsm > become_method: sudo > > but I fear it got somehow ignored. > I'll investigate it. > > >> >> *Output from ansible epdb tracepoint:* >> >> Using module file /usr/lib/python2.7/site-packag >> es/ansible/modules/commands/command.py >> ESTABLISH LOCAL CONNECTION FOR USER: root >> EXEC /bin/sh -c 'echo ~ && sleep 0' >> EXEC /bin/sh -c '( umask 77 && mkdir -p "` echo >> /root/.ansible/tmp/ansible-tmp-1522767715.36-81496549401055 `" && echo >> ansible-tmp-1522767715.36-81496549401055="` echo >> /root/.ansible/tmp/ansible-tmp-1522767715.36-81496549401055 `" ) && >> sleep 0' >> PUT /tmp/tmpGMGdjh TO /root/.ansible/tmp/ansible-tmp >> -1522767715.36-81496549401055/command.py >> EXEC /bin/sh -c 'chmod u+x /root/.ansible/tmp/ansible-tmp-1522767715.36-81496549401055/ >> /root/.ansible/tmp/ansible-tmp-1522767715.36-81496549401055/command.py >> && sleep 0' >> EXEC /bin/sh -c '/usr/bin/python >> /root/.ansible/tmp/ansible-tmp-1522767715.36-81496549401055/command.py >> && sleep 0' >> to retry, use: --limit @/usr/share/ovirt-hosted-engin >> e-setup/ansible/create_target_vm.retry >> >> The above command.py is the on I have attached as problematic_command.py >> >> *Investigation After Failure:* >> [root at node ~]# ls -al '/rhev/data-center/mnt/node.lo >> cal:_srv_data/81292f3f-11d3-4e38-9afa-62e133aa8017/images/c5 >> 510e77-1ee0-479c-b6cf-24c179313a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c' >> -rw-rw----. 1 vdsm kvm 20480 Apr 3 15:01 /rhev/data-center/mnt/node.loc >> al:_srv_data/81292f3f-11d3-4e38-9afa-62e133aa8017/images/c55 >> 10e77-1ee0-479c-b6cf-24c179313a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c >> >> sudo -u vdsm dd bs=20480 count=1 oflag=direct >> if="/var/tmp/localvmbCDQIR/5ef881f5-c992-48d2-b969-a0b6156bdf7c" >> of="/rhev/data-center/mnt/node.local:_srv_data/81292f3f-11d3 >> -4e38-9afa-62e133aa8017/images/c5510e77-1ee0-479c-b6cf-24c17 >> 9313a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c >> 1+0 records in >> 1+0 records out >> >> >> It seems to me that somehow it is not getting the right permissions even >> though the playbook has: >> - name: Copy configuration archive to storage >> command: dd bs=20480 count=1 oflag=direct if="{{ LOCAL_VM_DIR }}/{{ >> he_conf_disk_details.disk.image_id }}" of="{{ he_conf_disk_path }}" >> become_user: vdsm >> become_method: sudo >> changed_when: True >> tags: [ 'skip_ansible_lint' ] >> >> >> On Tue, Apr 3, 2018 at 8:51 AM, RabidCicada >> wrote: >> >>> I am now also running with: >>> >>> export ANSIBLE_VERBOSITY=5 >>> >>> export ANSIBLE_FORKS=1 >>> >>> export ANSIBLE_KEEP_REMOTE_FILES=1 >>> >>> >>> On Tue, Apr 3, 2018 at 8:49 AM, RabidCicada >>> wrote: >>> >>>> Here's the log. >>>> >>>> So the command that it says it ran is: >>>> dd bs=20480 count=1 oflag=direct if=/var/tmp/localvmHaWb6G/1cce >>>> 8df2-1810-4063-b4e2-e19a2c5b1909 of=/rhev/data-center/mnt/node. >>>> local:_srv_data/3c7485ea-14e3-40c1-b627-f89a819ed1d6/images/ >>>> 2c1f7c2f-b8f7-46d4-ac66-8ff1e9649e29/1cce8df2-1810-4063-b4e2 >>>> -e19a2c5b1909 >>>> >>>> But we all know that was done with: >>>> >>>> - name: Copy configuration archive to storage >>>> command: dd bs=20480 count=1 oflag=direct if="{{ LOCAL_VM_DIR }}/{{ >>>> he_conf_disk_details.disk.image_id }}" of="{{ he_conf_disk_path }}" >>>> become_user: vdsm >>>> become_method: sudo >>>> changed_when: True >>>> tags: [ 'skip_ansible_lint' ] >>>> >>>> So I manually replicated with `sudo vdsm dd bs=20480 count=1 >>>> if=/var/tmp/localvmHaWb6G/1cce8df2-1810-4063-b4e2-e19a2c5b1909 >>>> of=/rhev/data-center/mnt/node.local:_srv_data/3c7485ea-14e3- >>>> 40c1-b627-f89a819ed1d6/images/2c1f7c2f-b8f7-46d4-ac66-8ff1e9 >>>> 649e29/1cce8df2-1810-4063-b4e2-e19a2c5b1909` >>>> >>>> And it works when I manually do it. Though I think I didn't use the >>>> oflag=direct (Just realised this) >>>> >>>> I eventually put a pause task directly preceeding it with debug output >>>> that showed the file paths. I manually ran the command and it worked. >>>> Then let it do it....failed. I checked all the permissions e.g. >>>> vdsm:kvm. All looks good from a filesystem point of view. I'm beginning >>>> (naively) to suspect a race condition for the file access problem...but >>>> have come nowhere close to solving it. >>>> >>>> *Can you suggest a good way to continue executing the install process >>>> from the create_target_vm.yml playbook (with proper variables and context >>>> from otopi etc)?* I currently have to restart the entire process over >>>> again and wait quite a while for it to circle back around. >>>> >>>> I have since discovered epdb and I've set breakpoints directly in >>>> playbook.py of ansible just to see better log output. I insert epdb.serve >>>> and use netcat to connect since epdb on python 2.7.5 and up seems to have >>>> problems using epdb.connect() itself. >>>> >>>> ~Kyle >>>> >>>> On Tue, Apr 3, 2018 at 4:06 AM, Simone Tiraboschi >>>> wrote: >>>> >>>>> >>>>> >>>>> On Mon, Apr 2, 2018 at 4:52 PM, RabidCicada >>>>> wrote: >>>>> >>>>>> Heyo everyone. I'm trying to debug hosted-engine --deploy. It is >>>>>> failing in `Copy configuration archive to storage` in >>>>>> `create_target_vm.yml` from `hosted-engine --deploy`. My general >>>>>> and most important query here is how to get good debug output from ansible >>>>>> through hosted-engine. I'm running hosted-engine through an ssh session. >>>>>> >>>>>> I can't figure out how to get good debug output from ansible within >>>>>> that workflow. I see it's running through otopi, I tried setting >>>>>> typical `debugger: on_failed` hooks etc and tried many incantations on the >>>>>> command line and config files to get ansible to help me out. The >>>>>> debugger: directive and other debugger related ansible config file stuff >>>>>> wouldn't result in any debugger popping up. I also can't seem to pass >>>>>> normal -vvvv flags to hosted-engine either and get it to ansible. >>>>>> Ultimately I tried to use a `pause` directive and it complained that it was >>>>>> in a non-interactive shell. I figured it might be the result of my ssh >>>>>> session so I enabled tty allocation with -t -t. It did not resolve the >>>>>> issue. >>>>>> >>>>>> I eventually wrote-my-own/stole a callback_plugin that checks an >>>>>> environmental variable and enables `display.verbosity = int(v)` since I >>>>>> can't seem to pass typical -vvvv stuff to ansible through `hosted-engine >>>>>> --deploy`. It give me the best info that I have so far. But it wont give >>>>>> me enough to debug issues around Gathering Facts or what looks like a >>>>>> sudo/permission problem in `Copy configuration archive to storage` >>>>>> in `create_target_vm.yml`. I took and used the exact command that they use >>>>>> manually and it works when I run it manually (But I can't get debug output >>>>>> to show me the exact sudo command being executed), hence my interest in >>>>>> passing -vvvv or equivalent to ansible through `hosted-engine`. I >>>>>> intentionally disabled the VM_directory cleanup so that I could execute the >>>>>> same stuff. >>>>>> >>>>>> So....after all that...what is a good way to get deep debug info from >>>>>> hosted-engine ansible stuff? >>>>>> >>>>> >>>>> You should already find all the relevant log entries in a file >>>>> called /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engin >>>>> e-setup-ansible-create_target_vm-{timestamp}-{hash}.log >>>>> >>>>> Can you please share it? >>>>> >>>>> >>>>>> >>>>>> Or does anyone have intuition for the possible sudo problem? >>>>>> ~Kyle >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Users mailing list >>>>>> Users at ovirt.org >>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>> >>>>>> >>>>> >>>> >>> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From rabidcicada at gmail.com Tue Apr 3 19:46:53 2018 From: rabidcicada at gmail.com (RabidCicada) Date: Tue, 3 Apr 2018 15:46:53 -0400 Subject: [ovirt-users] hosted-engine Debug Help In-Reply-To: References: Message-ID: Indeed that is the problem. I am sshing as root The only possible explanations I have for this working in the ovirt autmated testing setup are: - Either the ovirt automated tests must be using a host inventory file with become: true? - The inventory file ssh credentials happen to be to vdsm user? (And become is just not doing anything) - Some other janky thing that allows the access It also happens for the immediately following task `Initialize metadata volume` and many more following that task. I will correct and then open a pull request to fix with your input that you believe it's a problem. ~Kyle On Tue, Apr 3, 2018 at 3:08 PM, RabidCicada wrote: > Alright. By differential comparing to successfull postgres-command > sudo-becomes. It looks like the salient difference is that `Copy > configuration archive to storage` is missing become:true. Testing now. > > The similar postgres commands have become:true while this one does not. > > ~Kyle > > On Tue, Apr 3, 2018 at 1:19 PM, Simone Tiraboschi > wrote: > >> >> >> On Tue, Apr 3, 2018 at 5:21 PM, RabidCicada >> wrote: >> >>> I've attached a full debug packet below. I include the log file from >>> ovirt-hosted-engine-setup. I include relevant cmd line info. I include >>> info from the command line where epdb has a breakpoint in playbook.py from >>> ansible itself. I also include info from commands I ran after it failed. >>> I also include attached the ferried over script in /root/.ansible/tmp that >>> is run. >>> >>> >>> *Output on cmd line:* >>> [ INFO ] TASK [Copy configuration archive to storage] >>> [ ERROR ] fatal: [localhost]: FAILED! => { >>> "changed": true, >>> "cmd": [ >>> "dd", >>> "bs=20480", >>> "count=1", >>> "oflag=direct", >>> "if=/var/tmp/localvmbCDQIR/5e >>> f881f5-c992-48d2-b969-a0b6156bdf7c", >>> "of=/rhev/data-center/mnt/nod >>> e.local:_srv_data/81292f3f-11d3-4e38-9afa-62e133aa8017/image >>> s/c5510e77-1ee0-479c-b6cf-24c179313a45/5ef881f5-c992-48d2-b9 >>> 69-a0b6156bdf7c" >>> ], >>> "delta": "0:00:00.004336", >>> "end": "2018-04-03 15:01:55.581823", >>> "invocation": { >>> "module_args": { >>> "_raw_params": "dd bs=20480 count=1 oflag=direct >>> if=\"/var/tmp/localvmbCDQIR/5ef881f5-c992-48d2-b969-a0b6156bdf7c\" >>> of=\"/rhev/data-center/mnt/node.local:_srv_data/81292f3f-11d >>> 3-4e38-9afa-62e133aa8017/images/c5510e77-1ee0-479c-b6cf-24c1 >>> 79313a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c\"", >>> "_uses_shell": false, >>> "chdir": null, >>> "creates": null, >>> "executable": null, >>> "removes": null, >>> "stdin": null, >>> "warn": true >>> } >>> }, >>> "msg": "non-zero return code", >>> "rc": 1, >>> "start": "2018-04-03 15:01:55.577487", >>> "stderr": "dd: failed to open ?/rhev/data-center/mnt/node.lo >>> cal:_srv_data/81292f3f-11d3-4e38-9afa-62e133aa8017/images/c5 >>> 510e77-1ee0-479c-b6cf-24c179313a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c?: >>> Permission denied", >>> "stderr_lines": [ >>> "dd: failed to open ?/rhev/data-center/mnt/node.lo >>> cal:_srv_data/81292f3f-11d3-4e38-9afa-62e133aa8017/images/c5 >>> 510e77-1ee0-479c-b6cf-24c179313a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c?: >>> Permission denied" >>> ], >>> "stdout": "", >>> "stdout_lines": [] >>> } >>> [ ERROR ] Failed to execute stage 'Closing up': Failed executing >>> ansible-playbook >>> >> >> In the playbook we have on that task: >> become_user: vdsm >> become_method: sudo >> >> but I fear it got somehow ignored. >> I'll investigate it. >> >> >>> >>> *Output from ansible epdb tracepoint:* >>> >>> Using module file /usr/lib/python2.7/site-packag >>> es/ansible/modules/commands/command.py >>> ESTABLISH LOCAL CONNECTION FOR USER: root >>> EXEC /bin/sh -c 'echo ~ && sleep 0' >>> EXEC /bin/sh -c '( umask 77 && mkdir -p "` echo >>> /root/.ansible/tmp/ansible-tmp-1522767715.36-81496549401055 `" && echo >>> ansible-tmp-1522767715.36-81496549401055="` echo >>> /root/.ansible/tmp/ansible-tmp-1522767715.36-81496549401055 `" ) && >>> sleep 0' >>> PUT /tmp/tmpGMGdjh TO /root/.ansible/tmp/ansible-tmp >>> -1522767715.36-81496549401055/command.py >>> EXEC /bin/sh -c 'chmod u+x /root/.ansible/tmp/ansible-tmp-1522767715.36-81496549401055/ >>> /root/.ansible/tmp/ansible-tmp-1522767715.36-81496549401055/command.py >>> && sleep 0' >>> EXEC /bin/sh -c '/usr/bin/python >>> /root/.ansible/tmp/ansible-tmp-1522767715.36-81496549401055/command.py >>> && sleep 0' >>> to retry, use: --limit @/usr/share/ovirt-hosted-engin >>> e-setup/ansible/create_target_vm.retry >>> >>> The above command.py is the on I have attached as problematic_command.py >>> >>> *Investigation After Failure:* >>> [root at node ~]# ls -al '/rhev/data-center/mnt/node.lo >>> cal:_srv_data/81292f3f-11d3-4e38-9afa-62e133aa8017/images/c5 >>> 510e77-1ee0-479c-b6cf-24c179313a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c' >>> -rw-rw----. 1 vdsm kvm 20480 Apr 3 15:01 /rhev/data-center/mnt/node.loc >>> al:_srv_data/81292f3f-11d3-4e38-9afa-62e133aa8017/images/c55 >>> 10e77-1ee0-479c-b6cf-24c179313a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c >>> >>> sudo -u vdsm dd bs=20480 count=1 oflag=direct >>> if="/var/tmp/localvmbCDQIR/5ef881f5-c992-48d2-b969-a0b6156bdf7c" >>> of="/rhev/data-center/mnt/node.local:_srv_data/81292f3f-11d3 >>> -4e38-9afa-62e133aa8017/images/c5510e77-1ee0-479c-b6cf-24c17 >>> 9313a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c >>> 1+0 records in >>> 1+0 records out >>> >>> >>> It seems to me that somehow it is not getting the right permissions even >>> though the playbook has: >>> - name: Copy configuration archive to storage >>> command: dd bs=20480 count=1 oflag=direct if="{{ LOCAL_VM_DIR }}/{{ >>> he_conf_disk_details.disk.image_id }}" of="{{ he_conf_disk_path }}" >>> become_user: vdsm >>> become_method: sudo >>> changed_when: True >>> tags: [ 'skip_ansible_lint' ] >>> >>> >>> On Tue, Apr 3, 2018 at 8:51 AM, RabidCicada >>> wrote: >>> >>>> I am now also running with: >>>> >>>> export ANSIBLE_VERBOSITY=5 >>>> >>>> export ANSIBLE_FORKS=1 >>>> >>>> export ANSIBLE_KEEP_REMOTE_FILES=1 >>>> >>>> >>>> On Tue, Apr 3, 2018 at 8:49 AM, RabidCicada >>>> wrote: >>>> >>>>> Here's the log. >>>>> >>>>> So the command that it says it ran is: >>>>> dd bs=20480 count=1 oflag=direct if=/var/tmp/localvmHaWb6G/1cce >>>>> 8df2-1810-4063-b4e2-e19a2c5b1909 of=/rhev/data-center/mnt/node. >>>>> local:_srv_data/3c7485ea-14e3-40c1-b627-f89a819ed1d6/images/ >>>>> 2c1f7c2f-b8f7-46d4-ac66-8ff1e9649e29/1cce8df2-1810-4063-b4e2 >>>>> -e19a2c5b1909 >>>>> >>>>> But we all know that was done with: >>>>> >>>>> - name: Copy configuration archive to storage >>>>> command: dd bs=20480 count=1 oflag=direct if="{{ LOCAL_VM_DIR >>>>> }}/{{ he_conf_disk_details.disk.image_id }}" of="{{ he_conf_disk_path >>>>> }}" >>>>> become_user: vdsm >>>>> become_method: sudo >>>>> changed_when: True >>>>> tags: [ 'skip_ansible_lint' ] >>>>> >>>>> So I manually replicated with `sudo vdsm dd bs=20480 count=1 >>>>> if=/var/tmp/localvmHaWb6G/1cce8df2-1810-4063-b4e2-e19a2c5b1909 >>>>> of=/rhev/data-center/mnt/node.local:_srv_data/3c7485ea-14e3- >>>>> 40c1-b627-f89a819ed1d6/images/2c1f7c2f-b8f7-46d4-ac66-8ff1e9 >>>>> 649e29/1cce8df2-1810-4063-b4e2-e19a2c5b1909` >>>>> >>>>> And it works when I manually do it. Though I think I didn't use the >>>>> oflag=direct (Just realised this) >>>>> >>>>> I eventually put a pause task directly preceeding it with debug output >>>>> that showed the file paths. I manually ran the command and it worked. >>>>> Then let it do it....failed. I checked all the permissions e.g. >>>>> vdsm:kvm. All looks good from a filesystem point of view. I'm beginning >>>>> (naively) to suspect a race condition for the file access problem...but >>>>> have come nowhere close to solving it. >>>>> >>>>> *Can you suggest a good way to continue executing the install process >>>>> from the create_target_vm.yml playbook (with proper variables and context >>>>> from otopi etc)?* I currently have to restart the entire process >>>>> over again and wait quite a while for it to circle back around. >>>>> >>>>> I have since discovered epdb and I've set breakpoints directly in >>>>> playbook.py of ansible just to see better log output. I insert epdb.serve >>>>> and use netcat to connect since epdb on python 2.7.5 and up seems to have >>>>> problems using epdb.connect() itself. >>>>> >>>>> ~Kyle >>>>> >>>>> On Tue, Apr 3, 2018 at 4:06 AM, Simone Tiraboschi >>>> > wrote: >>>>> >>>>>> >>>>>> >>>>>> On Mon, Apr 2, 2018 at 4:52 PM, RabidCicada >>>>>> wrote: >>>>>> >>>>>>> Heyo everyone. I'm trying to debug hosted-engine --deploy. It is >>>>>>> failing in `Copy configuration archive to storage` in >>>>>>> `create_target_vm.yml` from `hosted-engine --deploy`. My general >>>>>>> and most important query here is how to get good debug output from ansible >>>>>>> through hosted-engine. I'm running hosted-engine through an ssh session. >>>>>>> >>>>>>> I can't figure out how to get good debug output from ansible within >>>>>>> that workflow. I see it's running through otopi, I tried setting >>>>>>> typical `debugger: on_failed` hooks etc and tried many incantations on the >>>>>>> command line and config files to get ansible to help me out. The >>>>>>> debugger: directive and other debugger related ansible config file stuff >>>>>>> wouldn't result in any debugger popping up. I also can't seem to pass >>>>>>> normal -vvvv flags to hosted-engine either and get it to ansible. >>>>>>> Ultimately I tried to use a `pause` directive and it complained that it was >>>>>>> in a non-interactive shell. I figured it might be the result of my ssh >>>>>>> session so I enabled tty allocation with -t -t. It did not resolve the >>>>>>> issue. >>>>>>> >>>>>>> I eventually wrote-my-own/stole a callback_plugin that checks an >>>>>>> environmental variable and enables `display.verbosity = int(v)` since I >>>>>>> can't seem to pass typical -vvvv stuff to ansible through `hosted-engine >>>>>>> --deploy`. It give me the best info that I have so far. But it wont give >>>>>>> me enough to debug issues around Gathering Facts or what looks like a >>>>>>> sudo/permission problem in `Copy configuration archive to storage` >>>>>>> in `create_target_vm.yml`. I took and used the exact command that they use >>>>>>> manually and it works when I run it manually (But I can't get debug output >>>>>>> to show me the exact sudo command being executed), hence my interest in >>>>>>> passing -vvvv or equivalent to ansible through `hosted-engine`. I >>>>>>> intentionally disabled the VM_directory cleanup so that I could execute the >>>>>>> same stuff. >>>>>>> >>>>>>> So....after all that...what is a good way to get deep debug info >>>>>>> from hosted-engine ansible stuff? >>>>>>> >>>>>> >>>>>> You should already find all the relevant log entries in a file >>>>>> called /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engin >>>>>> e-setup-ansible-create_target_vm-{timestamp}-{hash}.log >>>>>> >>>>>> Can you please share it? >>>>>> >>>>>> >>>>>>> >>>>>>> Or does anyone have intuition for the possible sudo problem? >>>>>>> ~Kyle >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Users mailing list >>>>>>> Users at ovirt.org >>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From stirabos at redhat.com Tue Apr 3 20:50:32 2018 From: stirabos at redhat.com (Simone Tiraboschi) Date: Tue, 3 Apr 2018 22:50:32 +0200 Subject: [ovirt-users] hosted-engine Debug Help In-Reply-To: References: Message-ID: On Tue, Apr 3, 2018 at 9:46 PM, RabidCicada wrote: > Indeed that is the problem. I am sshing as root > > The only possible explanations I have for this working in the ovirt > autmated testing setup are: > > - Either the ovirt automated tests must be using a host inventory file > with become: true? > - The inventory file ssh credentials happen to be to vdsm user? (And > become is just not doing anything) > - Some other janky thing that allows the access > > Yes, you are absolutely right: we are running the CI suite with no_root_squash https://github.com/oVirt/ovirt-system-tests/blob/master/common/deploy-scripts/setup_storage_nfs_el7.sh#L17 while we recommend anonuid=36,anongid=36,all_squash https://www.ovirt.org/documentation/how-to/troubleshooting/troubleshooting-nfs-storage-issues/ and this explains why it can write as root in the CI env. Thanks for the report! > > It also happens for the immediately following task `Initialize metadata > volume` and many more following that task. > > I will correct and then open a pull request to fix with your input that > you believe it's a problem. > > ~Kyle > > > On Tue, Apr 3, 2018 at 3:08 PM, RabidCicada wrote: > >> Alright. By differential comparing to successfull postgres-command >> sudo-becomes. It looks like the salient difference is that `Copy >> configuration archive to storage` is missing become:true. Testing now. >> >> The similar postgres commands have become:true while this one does not. >> >> ~Kyle >> >> On Tue, Apr 3, 2018 at 1:19 PM, Simone Tiraboschi >> wrote: >> >>> >>> >>> On Tue, Apr 3, 2018 at 5:21 PM, RabidCicada >>> wrote: >>> >>>> I've attached a full debug packet below. I include the log file from >>>> ovirt-hosted-engine-setup. I include relevant cmd line info. I include >>>> info from the command line where epdb has a breakpoint in playbook.py from >>>> ansible itself. I also include info from commands I ran after it failed. >>>> I also include attached the ferried over script in /root/.ansible/tmp that >>>> is run. >>>> >>>> >>>> *Output on cmd line:* >>>> [ INFO ] TASK [Copy configuration archive to storage] >>>> [ ERROR ] fatal: [localhost]: FAILED! => { >>>> "changed": true, >>>> "cmd": [ >>>> "dd", >>>> "bs=20480", >>>> "count=1", >>>> "oflag=direct", >>>> "if=/var/tmp/localvmbCDQIR/5e >>>> f881f5-c992-48d2-b969-a0b6156bdf7c", >>>> "of=/rhev/data-center/mnt/nod >>>> e.local:_srv_data/81292f3f-11d3-4e38-9afa-62e133aa8017/image >>>> s/c5510e77-1ee0-479c-b6cf-24c179313a45/5ef881f5-c992-48d2-b9 >>>> 69-a0b6156bdf7c" >>>> ], >>>> "delta": "0:00:00.004336", >>>> "end": "2018-04-03 15:01:55.581823", >>>> "invocation": { >>>> "module_args": { >>>> "_raw_params": "dd bs=20480 count=1 oflag=direct >>>> if=\"/var/tmp/localvmbCDQIR/5ef881f5-c992-48d2-b969-a0b6156bdf7c\" >>>> of=\"/rhev/data-center/mnt/node.local:_srv_data/81292f3f-11d >>>> 3-4e38-9afa-62e133aa8017/images/c5510e77-1ee0-479c-b6cf-24c1 >>>> 79313a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c\"", >>>> "_uses_shell": false, >>>> "chdir": null, >>>> "creates": null, >>>> "executable": null, >>>> "removes": null, >>>> "stdin": null, >>>> "warn": true >>>> } >>>> }, >>>> "msg": "non-zero return code", >>>> "rc": 1, >>>> "start": "2018-04-03 15:01:55.577487", >>>> "stderr": "dd: failed to open >>>> ?/rhev/data-center/mnt/node.local:_srv_data/81292f3f-11d3-4e >>>> 38-9afa-62e133aa8017/images/c5510e77-1ee0-479c-b6cf-24c17931 >>>> 3a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c?: Permission denied", >>>> "stderr_lines": [ >>>> "dd: failed to open ?/rhev/data-center/mnt/node.lo >>>> cal:_srv_data/81292f3f-11d3-4e38-9afa-62e133aa8017/images/c5 >>>> 510e77-1ee0-479c-b6cf-24c179313a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c?: >>>> Permission denied" >>>> ], >>>> "stdout": "", >>>> "stdout_lines": [] >>>> } >>>> [ ERROR ] Failed to execute stage 'Closing up': Failed executing >>>> ansible-playbook >>>> >>> >>> In the playbook we have on that task: >>> become_user: vdsm >>> become_method: sudo >>> >>> but I fear it got somehow ignored. >>> I'll investigate it. >>> >>> >>>> >>>> *Output from ansible epdb tracepoint:* >>>> >>>> Using module file /usr/lib/python2.7/site-packag >>>> es/ansible/modules/commands/command.py >>>> ESTABLISH LOCAL CONNECTION FOR USER: root >>>> EXEC /bin/sh -c 'echo ~ && sleep 0' >>>> EXEC /bin/sh -c '( umask 77 && mkdir -p "` echo >>>> /root/.ansible/tmp/ansible-tmp-1522767715.36-81496549401055 `" && echo >>>> ansible-tmp-1522767715.36-81496549401055="` echo >>>> /root/.ansible/tmp/ansible-tmp-1522767715.36-81496549401055 `" ) && >>>> sleep 0' >>>> PUT /tmp/tmpGMGdjh TO /root/.ansible/tmp/ansible-tmp >>>> -1522767715.36-81496549401055/command.py >>>> EXEC /bin/sh -c 'chmod u+x /root/.ansible/tmp/ansible-tmp-1522767715.36-81496549401055/ >>>> /root/.ansible/tmp/ansible-tmp-1522767715.36-81496549401055/command.py >>>> && sleep 0' >>>> EXEC /bin/sh -c '/usr/bin/python >>>> /root/.ansible/tmp/ansible-tmp-1522767715.36-81496549401055/command.py >>>> && sleep 0' >>>> to retry, use: --limit @/usr/share/ovirt-hosted-engin >>>> e-setup/ansible/create_target_vm.retry >>>> >>>> The above command.py is the on I have attached as problematic_command.py >>>> >>>> *Investigation After Failure:* >>>> [root at node ~]# ls -al '/rhev/data-center/mnt/node.lo >>>> cal:_srv_data/81292f3f-11d3-4e38-9afa-62e133aa8017/images/c5 >>>> 510e77-1ee0-479c-b6cf-24c179313a45/5ef881f5-c992-48d2-b969-a >>>> 0b6156bdf7c' >>>> -rw-rw----. 1 vdsm kvm 20480 Apr 3 15:01 /rhev/data-center/mnt/node.loc >>>> al:_srv_data/81292f3f-11d3-4e38-9afa-62e133aa8017/images/c55 >>>> 10e77-1ee0-479c-b6cf-24c179313a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c >>>> >>>> sudo -u vdsm dd bs=20480 count=1 oflag=direct >>>> if="/var/tmp/localvmbCDQIR/5ef881f5-c992-48d2-b969-a0b6156bdf7c" >>>> of="/rhev/data-center/mnt/node.local:_srv_data/81292f3f-11d3 >>>> -4e38-9afa-62e133aa8017/images/c5510e77-1ee0-479c-b6cf-24c17 >>>> 9313a45/5ef881f5-c992-48d2-b969-a0b6156bdf7c >>>> 1+0 records in >>>> 1+0 records out >>>> >>>> >>>> It seems to me that somehow it is not getting the right permissions >>>> even though the playbook has: >>>> - name: Copy configuration archive to storage >>>> command: dd bs=20480 count=1 oflag=direct if="{{ LOCAL_VM_DIR }}/{{ >>>> he_conf_disk_details.disk.image_id }}" of="{{ he_conf_disk_path }}" >>>> become_user: vdsm >>>> become_method: sudo >>>> changed_when: True >>>> tags: [ 'skip_ansible_lint' ] >>>> >>>> >>>> On Tue, Apr 3, 2018 at 8:51 AM, RabidCicada >>>> wrote: >>>> >>>>> I am now also running with: >>>>> >>>>> export ANSIBLE_VERBOSITY=5 >>>>> >>>>> export ANSIBLE_FORKS=1 >>>>> >>>>> export ANSIBLE_KEEP_REMOTE_FILES=1 >>>>> >>>>> >>>>> On Tue, Apr 3, 2018 at 8:49 AM, RabidCicada >>>>> wrote: >>>>> >>>>>> Here's the log. >>>>>> >>>>>> So the command that it says it ran is: >>>>>> dd bs=20480 count=1 oflag=direct if=/var/tmp/localvmHaWb6G/1cce >>>>>> 8df2-1810-4063-b4e2-e19a2c5b1909 of=/rhev/data-center/mnt/node. >>>>>> local:_srv_data/3c7485ea-14e3-40c1-b627-f89a819ed1d6/images/ >>>>>> 2c1f7c2f-b8f7-46d4-ac66-8ff1e9649e29/1cce8df2-1810-4063-b4e2 >>>>>> -e19a2c5b1909 >>>>>> >>>>>> But we all know that was done with: >>>>>> >>>>>> - name: Copy configuration archive to storage >>>>>> command: dd bs=20480 count=1 oflag=direct if="{{ LOCAL_VM_DIR >>>>>> }}/{{ he_conf_disk_details.disk.image_id }}" of="{{ >>>>>> he_conf_disk_path }}" >>>>>> become_user: vdsm >>>>>> become_method: sudo >>>>>> changed_when: True >>>>>> tags: [ 'skip_ansible_lint' ] >>>>>> >>>>>> So I manually replicated with `sudo vdsm dd bs=20480 count=1 >>>>>> if=/var/tmp/localvmHaWb6G/1cce8df2-1810-4063-b4e2-e19a2c5b1909 >>>>>> of=/rhev/data-center/mnt/node.local:_srv_data/3c7485ea-14e3- >>>>>> 40c1-b627-f89a819ed1d6/images/2c1f7c2f-b8f7-46d4-ac66-8ff1e9 >>>>>> 649e29/1cce8df2-1810-4063-b4e2-e19a2c5b1909` >>>>>> >>>>>> And it works when I manually do it. Though I think I didn't use the >>>>>> oflag=direct (Just realised this) >>>>>> >>>>>> I eventually put a pause task directly preceeding it with debug >>>>>> output that showed the file paths. I manually ran the command and it >>>>>> worked. Then let it do it....failed. I checked all the permissions e.g. >>>>>> vdsm:kvm. All looks good from a filesystem point of view. I'm beginning >>>>>> (naively) to suspect a race condition for the file access problem...but >>>>>> have come nowhere close to solving it. >>>>>> >>>>>> *Can you suggest a good way to continue executing the install process >>>>>> from the create_target_vm.yml playbook (with proper variables and context >>>>>> from otopi etc)?* I currently have to restart the entire process >>>>>> over again and wait quite a while for it to circle back around. >>>>>> >>>>>> I have since discovered epdb and I've set breakpoints directly in >>>>>> playbook.py of ansible just to see better log output. I insert epdb.serve >>>>>> and use netcat to connect since epdb on python 2.7.5 and up seems to have >>>>>> problems using epdb.connect() itself. >>>>>> >>>>>> ~Kyle >>>>>> >>>>>> On Tue, Apr 3, 2018 at 4:06 AM, Simone Tiraboschi < >>>>>> stirabos at redhat.com> wrote: >>>>>> >>>>>>> >>>>>>> >>>>>>> On Mon, Apr 2, 2018 at 4:52 PM, RabidCicada >>>>>>> wrote: >>>>>>> >>>>>>>> Heyo everyone. I'm trying to debug hosted-engine --deploy. It is >>>>>>>> failing in `Copy configuration archive to storage` in >>>>>>>> `create_target_vm.yml` from `hosted-engine --deploy`. My general >>>>>>>> and most important query here is how to get good debug output from ansible >>>>>>>> through hosted-engine. I'm running hosted-engine through an ssh session. >>>>>>>> >>>>>>>> I can't figure out how to get good debug output from ansible within >>>>>>>> that workflow. I see it's running through otopi, I tried setting >>>>>>>> typical `debugger: on_failed` hooks etc and tried many incantations on the >>>>>>>> command line and config files to get ansible to help me out. The >>>>>>>> debugger: directive and other debugger related ansible config file stuff >>>>>>>> wouldn't result in any debugger popping up. I also can't seem to pass >>>>>>>> normal -vvvv flags to hosted-engine either and get it to ansible. >>>>>>>> Ultimately I tried to use a `pause` directive and it complained that it was >>>>>>>> in a non-interactive shell. I figured it might be the result of my ssh >>>>>>>> session so I enabled tty allocation with -t -t. It did not resolve the >>>>>>>> issue. >>>>>>>> >>>>>>>> I eventually wrote-my-own/stole a callback_plugin that checks an >>>>>>>> environmental variable and enables `display.verbosity = int(v)` since I >>>>>>>> can't seem to pass typical -vvvv stuff to ansible through `hosted-engine >>>>>>>> --deploy`. It give me the best info that I have so far. But it wont give >>>>>>>> me enough to debug issues around Gathering Facts or what looks like a >>>>>>>> sudo/permission problem in `Copy configuration archive to storage` >>>>>>>> in `create_target_vm.yml`. I took and used the exact command that they use >>>>>>>> manually and it works when I run it manually (But I can't get debug output >>>>>>>> to show me the exact sudo command being executed), hence my interest in >>>>>>>> passing -vvvv or equivalent to ansible through `hosted-engine`. I >>>>>>>> intentionally disabled the VM_directory cleanup so that I could execute the >>>>>>>> same stuff. >>>>>>>> >>>>>>>> So....after all that...what is a good way to get deep debug info >>>>>>>> from hosted-engine ansible stuff? >>>>>>>> >>>>>>> >>>>>>> You should already find all the relevant log entries in a file >>>>>>> called /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engin >>>>>>> e-setup-ansible-create_target_vm-{timestamp}-{hash}.log >>>>>>> >>>>>>> Can you please share it? >>>>>>> >>>>>>> >>>>>>>> >>>>>>>> Or does anyone have intuition for the possible sudo problem? >>>>>>>> ~Kyle >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Users mailing list >>>>>>>> Users at ovirt.org >>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From tk at mdevsys.com Tue Apr 3 21:39:56 2018 From: tk at mdevsys.com (Tom) Date: Tue, 3 Apr 2018 17:39:56 -0400 Subject: [ovirt-users] oVirt non-self-hosted HA In-Reply-To: References: <28fe034f-863a-2d11-71ff-836178171648@mdevsys.com> Message-ID: Sent from my iPhone > On Apr 3, 2018, at 9:32 AM, Yaniv Kaul wrote: > > > >> On Tue, Apr 3, 2018 at 3:12 PM, TomK wrote: >> Hey Guy's, >> >> If I'm looking to setup the oVirt engine in an HA configuration off the physical servers hosting my VM's (non self hosted), what are my options here? >> >> I want to setup two to four active oVirt engine instances elsewhere and handle the HA via something like haproxy / keepalived to keep the entire experience seamless to the user. > > You will need to set up the oVirt engine service as well as the PG database (and ovirt-engine-dwhd service and any other service we run next to the engine) as highly available module. > In pacemaker[1], for example. > You'll need to ensure configuration is also sync'ed between nodes, etc. > Y. So already have one ovirt engine setup separately on a vm that manages two remote physical hosts. So familiar with the single host approach which I would simply replicate. At least that?s the idea anyway. Could you please expand a bit on the highly available module and syncing the config between hosts? Cheers, Tom > > [1] https://clusterlabs.org/quickstart-redhat.html >> >> From what I've seen in oVirt, that seems to be possible without the two oVirt engines even knowing each other's existence but is it something anyone has ever done? Any recommendations in this case? >> >> Having settings replicated would be a bonus but I would be comfortable if they weren't and I handle that myself. >> >> -- >> Cheers, >> Tom K. >> ------------------------------------------------------------------------------------- >> >> Living on earth is expensive, but it includes a free trip around the sun. >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dhy336 at sina.com Wed Apr 4 01:05:24 2018 From: dhy336 at sina.com (dhy336 at sina.com) Date: Wed, 04 Apr 2018 09:05:24 +0800 Subject: [ovirt-users] =?gbk?b?u9i4tKO6UmU6ICBvVmlydCBub24tc2VsZi1ob3N0?= =?gbk?q?ed_HA?= Message-ID: <20180404010524.BA3A31000D1@webmail.sinamail.sina.com.cn> Why not to use hosted-engine for engine HA? I am wanting to solute engine HA, But i do not know how to select haproxy/keepalived and hosted engine. -------------------------------------------------------------------------------------------------------------------------------------------------- ???? ----- ????Tom ????Yaniv Kaul ????users ???Re: [ovirt-users] oVirt non-self-hosted HA ???2018?04?04? 05?45? Sent from my iPhone On Apr 3, 2018, at 9:32 AM, Yaniv Kaul wrote: On Tue, Apr 3, 2018 at 3:12 PM, TomK wrote: Hey Guy's, If I'm looking to setup the oVirt engine in an HA configuration off the physical servers hosting my VM's (non self hosted), what are my options here? I want to setup two to four active oVirt engine instances elsewhere and handle the HA via something like haproxy / keepalived to keep the entire experience seamless to the user. You will need to set up the oVirt engine service as well as the PG database (and ovirt-engine-dwhd service and any other service we run next to the engine) as highly available module.In pacemaker[1], for example. You'll need to ensure configuration is also sync'ed between nodes, etc.Y. So already have one ovirt engine setup separately on a vm that manages two remote physical hosts. So familiar with the single host approach which I would simply replicate. At least that?s the idea anyway. Could you please expand a bit on the highly available module and syncing the config between hosts? Cheers,Tom [1] https://clusterlabs.org/quickstart-redhat.html From what I've seen in oVirt, that seems to be possible without the two oVirt engines even knowing each other's existence but is it something anyone has ever done? Any recommendations in this case? Having settings replicated would be a bonus but I would be comfortable if they weren't and I handle that myself. -- Cheers, Tom K. ------------------------------------------------------------------------------------- Living on earth is expensive, but it includes a free trip around the sun. _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users -------------- next part -------------- An HTML attachment was scrubbed... URL: From spfma.tech at e.mail.fr Wed Apr 4 06:51:36 2018 From: spfma.tech at e.mail.fr (spfma.tech at e.mail.fr) Date: Wed, 04 Apr 2018 08:51:36 +0200 Subject: [ovirt-users] Persistent dummy interface In-Reply-To: References: Message-ID: <20180404065136.C6FADE446D@smtp01.mail.de> Hi, Thanks for your reply, that was the idea I had but in a less clean way :-) So it is at os level, nothing special in oVirt. I have found the thing fully explained here, for reference : https://www.centos.org/forums/viewtopic.php?t=53233 Regards Le 03-Apr-2018 13:32:06 +0200, rabidcicada at gmail.com a crit: Sorry was on my phone. Modules-load.d On Tue, Apr 3, 2018, 7:29 AM RabidCicada wrote: I do this on CentOS with /etc/modules-lomodules-loadad.d. You can stick a file in there that is basically just a bash script that loads your driver and then does the ip link command all the same time. On Tue, Apr 3, 2018, 4:20 AM wrote: Hi, What is the right way to get a persistent dummy interface ? I need an internal network for lab purpoposes, so I created a dummy link "ip link add dummy_1 type dummy" and I was able to assign my logical network to it. But how to make it persistent ? Of course, after a reboot, the dummy device has gone and the server becomes non operational because of this non-compliant network. I have to recereate it by hand in order to get things work. Regards ------------------------------------------------------------------------------------------------- FreeMail powered by mail.fr _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users ------------------------------------------------------------------------------------------------- FreeMail powered by mail.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From ykaul at redhat.com Wed Apr 4 07:11:33 2018 From: ykaul at redhat.com (Yaniv Kaul) Date: Wed, 4 Apr 2018 10:11:33 +0300 Subject: [ovirt-users] oVirt non-self-hosted HA In-Reply-To: References: <28fe034f-863a-2d11-71ff-836178171648@mdevsys.com> Message-ID: On Wed, Apr 4, 2018 at 12:39 AM, Tom wrote: > > > Sent from my iPhone > > On Apr 3, 2018, at 9:32 AM, Yaniv Kaul wrote: > > > > On Tue, Apr 3, 2018 at 3:12 PM, TomK wrote: > >> Hey Guy's, >> >> If I'm looking to setup the oVirt engine in an HA configuration off the >> physical servers hosting my VM's (non self hosted), what are my options >> here? >> >> I want to setup two to four active oVirt engine instances elsewhere and >> handle the HA via something like haproxy / keepalived to keep the entire >> experience seamless to the user. >> > > You will need to set up the oVirt engine service as well as the PG > database (and ovirt-engine-dwhd service and any other service we run next > to the engine) as highly available module. > In pacemaker[1], for example. > You'll need to ensure configuration is also sync'ed between nodes, etc. > Y. > > > So already have one ovirt engine setup separately on a vm that manages two > remote physical hosts. So familiar with the single host approach which I > would simply replicate. At least that?s the idea anyway. Could you please > expand a bit on the highly available module and syncing the config between > hosts? > That's a different strategy, which is also legit - you treat this VM as a highly available resource. Now you do not need to sync the config - just the VM disk and config. Perhaps something like https://www.unixarena.com/2015/12/rhel-7-pacemaker-configuring-ha-kvm-guest.html . But if you are already doing that, I'm not sure why you'd prefer this over hosted-engine setup. Y. > > Cheers, > Tom > > > [1] https://clusterlabs.org/quickstart-redhat.html > >> >> From what I've seen in oVirt, that seems to be possible without the two >> oVirt engines even knowing each other's existence but is it something >> anyone has ever done? Any recommendations in this case? >> >> Having settings replicated would be a bonus but I would be comfortable if >> they weren't and I handle that myself. >> >> -- >> Cheers, >> Tom K. >> ------------------------------------------------------------ >> ------------------------- >> >> Living on earth is expensive, but it includes a free trip around the sun. >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From spfma.tech at e.mail.fr Wed Apr 4 07:12:48 2018 From: spfma.tech at e.mail.fr (spfma.tech at e.mail.fr) Date: Wed, 04 Apr 2018 09:12:48 +0200 Subject: [ovirt-users] STP and /var/lib/vdsm/persistence files Message-ID: <20180404071248.9ED27E446D@smtp01.mail.de> Hi, As these files are generated by oVirt when a modification occurs, how to enable STP on bridges by configuration ? I haven't been able to find this option in GUI. Editing ifconfig and persistence files is OK, but maybe I can modify something that would erase this handmade modification and it will be lost. I have only seen unanswered posts about this topic. Regards ------------------------------------------------------------------------------------------------- FreeMail powered by mail.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From frolland at redhat.com Wed Apr 4 07:13:40 2018 From: frolland at redhat.com (Fred Rolland) Date: Wed, 4 Apr 2018 10:13:40 +0300 Subject: [ovirt-users] Engine reports In-Reply-To: References: Message-ID: Hi, Check these links: https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ https://ovirt.org/develop/release-management/features/metrics/metrics-store/ Regards, Fred On Tue, Apr 3, 2018 at 9:38 AM, Anantha Raghava < raghav at exzatechconsulting.com> wrote: > Hi, > > I see that oVirt DWH is installed with Version 4.2.x. Now, how do I take > the reports? I version 3.5, we had Jasper reports module using which we > could take utilization reports. Can we do something similar here? > -- > > Thanks & Regards, > > > Anantha Raghava > > Do not print this e-mail unless required. Save Paper & trees. > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From andreil1 at starlett.lv Wed Apr 4 07:32:49 2018 From: andreil1 at starlett.lv (Andrei Verovski) Date: Wed, 4 Apr 2018 10:32:49 +0300 Subject: [ovirt-users] Q: Change MAC address of an existing VM Message-ID: Hi, Change MAC address of an existing VM: Compute -> Virtual machines -> Edit network -> Custom Mac Address This will change MAC address of only ONE VM, right ? Not for all VMs connected to the same ovirt-mgmt interface. Thanks Andrei From mburman at redhat.com Wed Apr 4 08:18:07 2018 From: mburman at redhat.com (Michael Burman) Date: Wed, 4 Apr 2018 11:18:07 +0300 Subject: [ovirt-users] Q: Change MAC address of an existing VM In-Reply-To: References: Message-ID: Hi, This will change only the MAC address of that specific vNIC that you are editing, for this specific VM. Cheers) On Wed, Apr 4, 2018 at 10:32 AM, Andrei Verovski wrote: > Hi, > > Change MAC address of an existing VM: > Compute -> Virtual machines -> Edit network -> Custom Mac Address > > This will change MAC address of only ONE VM, right ? > Not for all VMs connected to the same ovirt-mgmt interface. > > > Thanks > Andrei > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -- Michael Burman Senior Quality engineer - rhv network - redhat israel Red Hat mburman at redhat.com M: 0545355725 IM: mburman -------------- next part -------------- An HTML attachment was scrubbed... URL: From phudec at cnc.sk Wed Apr 4 09:17:36 2018 From: phudec at cnc.sk (Peter Hudec) Date: Wed, 4 Apr 2018 11:17:36 +0200 Subject: [ovirt-users] Engine reports In-Reply-To: References: Message-ID: Tried to install ovirt metrics, but got error ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e @/root/vars.yaml -i /root/ansible-inventory-origin-37-aio playbooks/byo/config.yml 1. Hosts: localhost Play: Determine openshift_version to configure on first master Task: For an RPM install, abort when the release requested does not match the available version. Message: You requested openshift_release 3.7, which is not matched by the latest OpenShift RPM we detected as origin-3.10.0 on host localhost. We will only install the latest RPMs, so please ensure you are getting the release you expect. You may need to adjust your Ansible inventory, modify the repositories available on the host, or run the appropriate OpenShift upgrade playbook. regards Peter On 04/04/2018 09:13, Fred Rolland wrote: > Hi, > > Check these links: > > https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ > https://ovirt.org/develop/release-management/features/metrics/metrics-store/ > > Regards, > Fred > > On Tue, Apr 3, 2018 at 9:38 AM, Anantha Raghava > > > wrote: > > Hi, > > I see that oVirt DWH is installed with Version 4.2.x. Now, how do I > take the reports? I version 3.5, we had Jasper reports module using > which we could take utilization reports. Can we do something similar > here? > > -- > > Thanks & Regards, > > > Anantha Raghava > > > Do not print this e-mail unless required. Save Paper & trees. > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -- *Peter Hudec* Infra?trukt?rny architekt phudec at cnc.sk *CNC,?a.s.* Borsk? 6,?841 04 Bratislava Recepcia:?+421 2? 35 000 100 Mobil:+421?905 997 203 *www.cnc.sk* From spfma.tech at e.mail.fr Wed Apr 4 09:21:58 2018 From: spfma.tech at e.mail.fr (spfma.tech at e.mail.fr) Date: Wed, 04 Apr 2018 11:21:58 +0200 Subject: [ovirt-users] Snapshot tree Message-ID: <20180404092158.4E954E4477@smtp01.mail.de> Hi, Can you confirm that there is no way to have a snapshot tree, like in VirtualBox, where one can revert to say "snapshot1" and then branch new children snapshot but without loosing any snapshots made after "snapshot1", which could have their own children ? According to the documentation, it is impoissible, but is there a workaround ? Regards ------------------------------------------------------------------------------------------------- FreeMail powered by mail.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From didi at redhat.com Wed Apr 4 09:41:14 2018 From: didi at redhat.com (Yedidyah Bar David) Date: Wed, 4 Apr 2018 12:41:14 +0300 Subject: [ovirt-users] Snapshot tree In-Reply-To: <20180404092158.4E954E4477@smtp01.mail.de> References: <20180404092158.4E954E4477@smtp01.mail.de> Message-ID: On Wed, Apr 4, 2018 at 12:21 PM, wrote: > Hi, > Can you confirm that there is no way to have a snapshot tree, like in > VirtualBox, where one can revert to say "snapshot1" and then branch new > children snapshot but without loosing any snapshots made after "snapshot1", > which could have their own children ? Indeed, oVirt does not have "snapshot trees". > According to the documentation, it is impoissible, but is there a workaround > ? Best workaround I came up with is Right-click a snapshot and choose 'Clone'. This will create a new VM from (a COW copy of) this snapshot. Best regards, -- Didi From frolland at redhat.com Wed Apr 4 09:52:23 2018 From: frolland at redhat.com (Fred Rolland) Date: Wed, 4 Apr 2018 12:52:23 +0300 Subject: [ovirt-users] Engine reports In-Reply-To: References: Message-ID: Shirly, can you take a look? On Wed, Apr 4, 2018 at 12:17 PM, Peter Hudec wrote: > Tried to install ovirt metrics, but got error > > ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e > @/root/vars.yaml -i /root/ansible-inventory-origin-37-aio > playbooks/byo/config.yml > > 1. Hosts: localhost > Play: Determine openshift_version to configure on first master > Task: For an RPM install, abort when the release requested does > not match the available version. > Message: You requested openshift_release 3.7, which is not matched by > the latest OpenShift RPM we detected as origin-3.10.0 > on host localhost. > We will only install the latest RPMs, so please ensure > you are getting the release > you expect. You may need to adjust your Ansible > inventory, modify the repositories > available on the host, or run the appropriate OpenShift > upgrade playbook. > > regards > Peter > > > On 04/04/2018 09:13, Fred Rolland wrote: > > Hi, > > > > Check these links: > > > > https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ > > https://ovirt.org/develop/release-management/features/ > metrics/metrics-store/ > > > > Regards, > > Fred > > > > On Tue, Apr 3, 2018 at 9:38 AM, Anantha Raghava > > > > > wrote: > > > > Hi, > > > > I see that oVirt DWH is installed with Version 4.2.x. Now, how do I > > take the reports? I version 3.5, we had Jasper reports module using > > which we could take utilization reports. Can we do something similar > > here? > > > > -- > > > > Thanks & Regards, > > > > > > Anantha Raghava > > > > > > Do not print this e-mail unless required. Save Paper & trees. > > > > > > _______________________________________________ > > Users mailing list > > Users at ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > > > > > > > _______________________________________________ > > Users mailing list > > Users at ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > > > -- > *Peter Hudec* > Infra?trukt?rny architekt > phudec at cnc.sk > > *CNC, a.s.* > Borsk? 6, 841 04 Bratislava > Recepcia: +421 2 35 000 100 > > Mobil:+421 905 997 203 > *www.cnc.sk* > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dhy336 at sina.com Wed Apr 4 10:28:45 2018 From: dhy336 at sina.com (dhy336 at sina.com) Date: Wed, 04 Apr 2018 18:28:45 +0800 Subject: [ovirt-users] hosted-engine deploy error Message-ID: <20180404102845.3554B7200CF@webmail.sinamail.sina.com.cn> Hi, I deloy hosted-engine, by this blog,https://ovirt.org/documentation/self-hosted/chap-Deploying_Self-Hosted_Engine/ but I am facing some error.who may give me some advise? [root at localhost ~]# hosted-engine --deploy --== STORAGE CONFIGURATION ==-- Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs3, nfs4)[nfs3]: Please specify the full shared storage connection path to use (example: host:/path): 192.168.122.134:/home/exports/hosted-engine --== HOST NETWORK CONFIGURATION ==-- iptables was detected on your computer, do you wish setup to configure it? (Yes, No)[Yes]: Please indicate a pingable gateway IP address [192.168.122.1]: Please indicate a nic to set ovirtmgmt bridge on: (eth0) [eth0]: --== VM CONFIGURATION ==-- The following appliance have been found on your system: [1] - The oVirt Engine Appliance image (OVA) - 4.1-20180124.1.el7.centos [2] - Directly select an OVA file Please select an appliance (1, 2) [1]: [ INFO ] Verifying its sha1sum[ INFO ] Checking OVF archive content (could take a few minutes depending on archive size)[ INFO ] Checking OVF XML content (could take a few minutes depending on archive size) Please specify the console type you would like to use to connect to the VM (vnc, spice) [vnc]: [ INFO ] Detecting host timezone. Would you like to use cloud-init to customize the appliance on the first boot (Yes, No)[Yes]? Would you like to generate on-fly a cloud-init ISO image (of no-cloud type) or do you have an existing one (Generate, Existing)[Generate]? Please provide the FQDN you would like to use for the engine appliance. Note: This will be the FQDN of the engine VM you are now going to launch, it should not point to the base host or to any other existing machine. Engine VM FQDN: (leave it empty to skip): []: engine.tchyp.com Please provide the domain name you would like to use for the engine appliance. Engine VM domain: [tchyp.com] Automatically execute engine-setup on the engine appliance on first boot (Yes, No)[Yes]? Automatically restart the engine VM as a monitored service after engine-setup (Yes, No)[Yes]? Enter root password that will be used for the engine appliance (leave it empty to skip): [WARNING] Skipping appliance root password Enter ssh public key for the root user that will be used for the engine appliance (leave it empty to skip): [WARNING] Skipping appliance root ssh public key Do you want to enable ssh access for the root user (yes, no, without-password) [yes]: [WARNING] The oVirt engine appliance is not configured with a default password, please consider configuring it via cloud-init Please specify the size of the VM disk in GB: [58]: [WARNING] Minimum requirements not met by available memory: Required: 4096 MB. Available: 3064 MB Please specify the memory size of the VM in MB (Defaults to maximum available): [3064]: [WARNING] Minimum requirements for memory size not met Continue with specified memory size? (Yes, No) [No]: yes The following CPU types are supported by this host: - model_Haswell-noTSX: Intel Haswell-noTSX Family - model_SandyBridge: Intel SandyBridge Family - model_Westmere: Intel Westmere Family - model_Nehalem: Intel Nehalem Family - model_Penryn: Intel Penryn Family - model_Conroe: Intel Conroe Family Please specify the CPU type to be used by the VM [model_Haswell-noTSX]: Please specify the number of virtual CPUs for the VM (Defaults to appliance OVF value): [4]: You may specify a unicast MAC address for the VM or accept a randomly generated default [00:16:3e:5d:72:8a]: How should the engine VM network be configured (DHCP, Static)[DHCP]? Static Please enter the IP address to be used for the engine VM [192.168.122.2]: 192.168.122.211[ INFO ] The engine VM will be configured to use 192.168.122.211/24 Please provide a comma-separated list (max 3) of IP addresses of domain name servers for the engine VM Engine VM DNS (leave it empty to skip) [192.168.122.1]: Add lines for the appliance itself and for this host to /etc/hosts on the engine VM? Note: ensuring that this host could resolve the engine VM hostname is still up to you (Yes, No)[No] --== HOSTED ENGINE CONFIGURATION ==-- Enter engine admin password: Confirm engine admin password: Please provide the name of the SMTP server through which we will send notifications [localhost]: Please provide the TCP port number of the SMTP server [25]: Please provide the email address from which notifications will be sent [root at localhost]: Please provide a comma-separated list of email addresses which will get notifications [root at localhost]: [ INFO ] Stage: Setup validation[WARNING] Cannot validate host name settings, reason: resolved host does not match any of the local addresses[ ERROR ] Host name is not valid: localhost.localdomain resolves to 127.0.0.1 and not all of them can be mapped to non loopback devices on this host[ ERROR ] Failed to execute stage 'Setup validation': Host name is not valid: localhost.localdomain resolves to 127.0.0.1 and not all of them can be mapped to non loopback devices on this host[ INFO ] Stage: Clean up[ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20180404182053.conf'[ INFO ] Stage: Pre-termination[ INFO ] Stage: Termination[ ERROR ] Hosted Engine deployment failed Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20180404181811-aq5ord.log -------------- next part -------------- An HTML attachment was scrubbed... URL: From rs at databay.de Wed Apr 4 10:21:58 2018 From: rs at databay.de (Ralf Schenk) Date: Wed, 4 Apr 2018 12:21:58 +0200 Subject: [ovirt-users] Now way to install on EFI and ISCSI Message-ID: <140525ca-e149-2770-e6ac-753083f2a04c@databay.de> Hello, I've a Epyc-based Supermicro Server that should act as ovirt host by using ovirt-node-next installed on ISCSI Boot Target. I already installed an EFI bootable OS (Ubuntu 16.04) on the Hardware using ISCSI Target as Boot-Disk. So far that works. If I try to install ovirt-node-next (tried ovirt-node-ng-installer-ovirt-4.2-2018032906.iso, ovirt-node-ng-installer-ovirt-4.2-2018040306.iso mounted via KVM as CD) I'm not able to use auto-partitioning nor manual partitioning to set the system up. Accessing the ISCSI Target (50GB) works. I created all the mount-points, including /boot and EFI System Partition /boot/efi. The installer automatically proposes /, /var /home and swap on thinpool LVMs which is ok. After having it ready the installer either doesn't accept "Done" as if no EFI Partition was prepared. If I highlight the EFI Partition and click Done it works but the Installer overview doesn't allow to start installation and storage configuration ist marked with a warning sign. The system is booted definitely via EFI from th installer CD. Bye -- *Ralf Schenk* fon +49 (0) 24 05 / 40 83 70 fax +49 (0) 24 05 / 40 83 759 mail *rs at databay.de* ? *Databay AG* Jens-Otto-Krag-Stra?e 11 D-52146 W?rselen *www.databay.de* Sitz/Amtsgericht Aachen ? HRB:8437 ? USt-IdNr.: DE 210844202 Vorstand: Ralf Schenk, Dipl.-Ing. Jens Conze, Aresch Yavari, Dipl.-Kfm. Philipp Hermanns Aufsichtsratsvorsitzender: Wilhelm Dohmen ------------------------------------------------------------------------ -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: ablahhanhjkadchi.gif Type: image/gif Size: 1250 bytes Desc: not available URL: From stirabos at redhat.com Wed Apr 4 10:41:30 2018 From: stirabos at redhat.com (Simone Tiraboschi) Date: Wed, 4 Apr 2018 12:41:30 +0200 Subject: [ovirt-users] hosted-engine deploy error In-Reply-To: <20180404102845.3554B7200CF@webmail.sinamail.sina.com.cn> References: <20180404102845.3554B7200CF@webmail.sinamail.sina.com.cn> Message-ID: On Wed, Apr 4, 2018 at 12:28 PM, wrote: > Hi, > > I deloy hosted-engine, by this blog,https://ovirt.org/ > documentation/self-hosted/chap-Deploying_Self-Hosted_Engine/ > but I am facing some error.who may give me some advise? > > [root at localhost ~]# hosted-engine --deploy > ^^^ The error is here: please set a valid hostname for your host: the engine VM should be able to reach it. If you add the host as localhost the engine VM will reach itself and it's not what we want. If you don'y have a working DNS system, hosted-engine-setup will ask about injecting an entry for you under /etc/hosts on the engine VM but you still need a valid hostname. > > > > --== STORAGE CONFIGURATION ==-- > > Please specify the storage you would like to use (glusterfs, > iscsi, fc, nfs3, nfs4)[nfs3]: > Please specify the full shared storage connection path to use > (example: host:/path): 192.168.122.134:/home/exports/hosted-engine > > --== HOST NETWORK CONFIGURATION ==-- > > iptables was detected on your computer, do you wish setup to > configure it? (Yes, No)[Yes]: > Please indicate a pingable gateway IP address [192.168.122.1]: > Please indicate a nic to set ovirtmgmt bridge on: (eth0) [eth0]: > > --== VM CONFIGURATION ==-- > > The following appliance have been found on your system: > [1] - The oVirt Engine Appliance image (OVA) - > 4.1-20180124.1.el7.centos > [2] - Directly select an OVA file > Please select an appliance (1, 2) [1]: > [ INFO ] Verifying its sha1sum > [ INFO ] Checking OVF archive content (could take a few minutes depending > on archive size) > [ INFO ] Checking OVF XML content (could take a few minutes depending on > archive size) > Please specify the console type you would like to use to connect > to the VM (vnc, spice) [vnc]: > [ INFO ] Detecting host timezone. > Would you like to use cloud-init to customize the appliance on > the first boot (Yes, No)[Yes]? > Would you like to generate on-fly a cloud-init ISO image (of > no-cloud type) > or do you have an existing one (Generate, Existing)[Generate]? > Please provide the FQDN you would like to use for the engine > appliance. > Note: This will be the FQDN of the engine VM you are now going > to launch, > it should not point to the base host or to any other existing > machine. > Engine VM FQDN: (leave it empty to skip): []: engine.tchyp.com > Please provide the domain name you would like to use for the > engine appliance. > Engine VM domain: [tchyp.com] > Automatically execute engine-setup on the engine appliance on > first boot (Yes, No)[Yes]? > Automatically restart the engine VM as a monitored service after > engine-setup (Yes, No)[Yes]? > Enter root password that will be used for the engine appliance > (leave it empty to skip): > [WARNING] Skipping appliance root password > Enter ssh public key for the root user that will be used for the > engine appliance (leave it empty to skip): > [WARNING] Skipping appliance root ssh public key > Do you want to enable ssh access for the root user (yes, no, > without-password) [yes]: > [WARNING] The oVirt engine appliance is not configured with a default > password, please consider configuring it via cloud-init > Please specify the size of the VM disk in GB: [58]: > [WARNING] Minimum requirements not met by available memory: Required: 4096 > MB. Available: 3064 MB > Please specify the memory size of the VM in MB (Defaults to > maximum available): [3064]: > [WARNING] Minimum requirements for memory size not met > Continue with specified memory size? (Yes, No) [No]: yes > The following CPU types are supported by this host: > - model_Haswell-noTSX: Intel Haswell-noTSX Family > - model_SandyBridge: Intel SandyBridge Family > - model_Westmere: Intel Westmere Family > - model_Nehalem: Intel Nehalem Family > - model_Penryn: Intel Penryn Family > - model_Conroe: Intel Conroe Family > Please specify the CPU type to be used by the VM > [model_Haswell-noTSX]: > Please specify the number of virtual CPUs for the VM (Defaults > to appliance OVF value): [4]: > You may specify a unicast MAC address for the VM or accept a > randomly generated default [00:16:3e:5d:72:8a]: > How should the engine VM network be configured (DHCP, > Static)[DHCP]? Static > Please enter the IP address to be used for the engine VM > [192.168.122.2]: 192.168.122.211 > [ INFO ] The engine VM will be configured to use 192.168.122.211/24 > Please provide a comma-separated list (max 3) of IP addresses of > domain name servers for the engine VM > Engine VM DNS (leave it empty to skip) [192.168.122.1]: > Add lines for the appliance itself and for this host to > /etc/hosts on the engine VM? > Note: ensuring that this host could resolve the engine VM > hostname is still up to you > (Yes, No)[No] > > --== HOSTED ENGINE CONFIGURATION ==-- > > Enter engine admin password: > Confirm engine admin password: > Please provide the name of the SMTP server through which we will > send notifications [localhost]: > Please provide the TCP port number of the SMTP server [25]: > Please provide the email address from which notifications will > be sent [root at localhost]: > Please provide a comma-separated list of email addresses which > will get notifications [root at localhost]: > [ INFO ] Stage: Setup validation > [WARNING] Cannot validate host name settings, reason: resolved host does > not match any of the local addresses > [ ERROR ] Host name is not valid: localhost.localdomain resolves to > 127.0.0.1 and not all of them can be mapped to non loopback devices on this > host > [ ERROR ] Failed to execute stage 'Setup validation': Host name is not > valid: localhost.localdomain resolves to 127.0.0.1 and not all of them can > be mapped to non loopback devices on this host > [ INFO ] Stage: Clean up > [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine- > setup/answers/answers-20180404182053.conf' > [ INFO ] Stage: Pre-termination > [ INFO ] Stage: Termination > [ ERROR ] Hosted Engine deployment failed > Log file is located at /var/log/ovirt-hosted-engine- > setup/ovirt-hosted-engine-setup-20180404181811-aq5ord.log > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dhy336 at sina.com Wed Apr 4 10:50:48 2018 From: dhy336 at sina.com (dhy336) Date: Wed, 04 Apr 2018 18:50:48 +0800 Subject: [ovirt-users] hosted-engine deploy error In-Reply-To: References: <20180404102845.3554B7200CF@webmail.sinamail.sina.com.cn> Message-ID: <1522839042400.sh3g4k5aqedpxv2szx1cwsyj@android.mail.163.com> thanks, but i do not know why is my hostname invalid? ?2018?04?04? 18:41?Simone Tiraboschi ??? On Wed, Apr 4, 2018 at 12:28 PM, wrote: Hi, ? I deloy hosted-engine, by this blog,https://ovirt.org/documentation/self-hosted/chap-Deploying_Self-Hosted_Engine/ ?but I am facing some error.who ?may give me ?some advise? [root at localhost ~]# hosted-engine --deploy ^^^ The error is here: please set a valid hostname for your host: the engine VM should be able to reach it. If you add the host as localhost the engine VM will reach itself and it's not what we want. If you don'y have a working DNS system, hosted-engine-setup will ask about injecting an entry for you under /etc/hosts on the engine VM but you still need a valid hostname. ? ? ? ? ? ? ? ? ? ? --== STORAGE CONFIGURATION ==-- ? ? ? ? ? ? ? ? ? ? Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs3, nfs4)[nfs3]:? ? ? ? ? ? Please specify the full shared storage connection path to use (example: host:/path): 192.168.122.134:/home/exports/hosted-engine ? ? ? ? ? ? ? ? ? ? --== HOST NETWORK CONFIGURATION ==-- ? ? ? ? ? ? ? ? ? ? iptables was detected on your computer, do you wish setup to configure it? (Yes, No)[Yes]:? ? ? ? ? ? Please indicate a pingable gateway IP address [192.168.122.1]:? ? ? ? ? ? Please indicate a nic to set ovirtmgmt bridge on: (eth0) [eth0]:? ? ? ? ? ? ? ? ? ? ? --== VM CONFIGURATION ==-- ? ? ? ? ? ? ? ? ? ? The following appliance have been found on your system: ? ? ? ? ? [1] - The oVirt Engine Appliance image (OVA) - 4.1-20180124.1.el7.centos ? ? ? ? ? [2] - Directly select an OVA file ? ? ? ? ? Please select an appliance (1, 2) [1]:? [ INFO ?] Verifying its sha1sum [ INFO ?] Checking OVF archive content (could take a few minutes depending on archive size) [ INFO ?] Checking OVF XML content (could take a few minutes depending on archive size) ? ? ? ? ? Please specify the console type you would like to use to connect to the VM (vnc, spice) [vnc]:? [ INFO ?] Detecting host timezone. ? ? ? ? ? Would you like to use cloud-init to customize the appliance on the first boot (Yes, No)[Yes]?? ? ? ? ? ? Would you like to generate on-fly a cloud-init ISO image (of no-cloud type) ? ? ? ? ? or do you have an existing one (Generate, Existing)[Generate]?? ? ? ? ? ? Please provide the FQDN you would like to use for the engine appliance. ? ? ? ? ? Note: This will be the FQDN of the engine VM you are now going to launch, ? ? ? ? ? it should not point to the base host or to any other existing machine. ? ? ? ? ? Engine VM FQDN: (leave it empty to skip): ?[]: engine.tchyp.com ? ? ? ? ? Please provide the domain name you would like to use for the engine appliance. ? ? ? ? ? Engine VM domain: [tchyp.com] ? ? ? ? ? Automatically execute engine-setup on the engine appliance on first boot (Yes, No)[Yes]?? ? ? ? ? ? Automatically restart the engine VM as a monitored service after engine-setup (Yes, No)[Yes]?? ? ? ? ? ? Enter root password that will be used for the engine appliance (leave it empty to skip):? [WARNING] Skipping appliance root password ? ? ? ? ? Enter ssh public key for the root user that will be used for the engine appliance (leave it empty to skip):? [WARNING] Skipping appliance root ssh public key ? ? ? ? ? Do you want to enable ssh access for the root user (yes, no, without-password) [yes]:? [WARNING] The oVirt engine appliance is not configured with a default password, please consider configuring it via cloud-init ? ? ? ? ? Please specify the size of the VM disk in GB: [58]:? [WARNING] Minimum requirements not met by available memory: Required: 4096 MB. Available: 3064 MB ? ? ? ? ? Please specify the memory size of the VM in MB (Defaults to maximum available): [3064]:? [WARNING] Minimum requirements for memory size not met ? ? ? ? ? Continue with specified memory size? (Yes, No) [No]: yes ? ? ? ? ? The following CPU types are supported by this host: ? ? ? ? ? - model_Haswell-noTSX: Intel Haswell-noTSX Family ? ? ? ? ? - model_SandyBridge: Intel SandyBridge Family ? ? ? ? ? - model_Westmere: Intel Westmere Family ? ? ? ? ? - model_Nehalem: Intel Nehalem Family ? ? ? ? ? - model_Penryn: Intel Penryn Family ? ? ? ? ? - model_Conroe: Intel Conroe Family ? ? ? ? ? Please specify the CPU type to be used by the VM [model_Haswell-noTSX]:? ? ? ? ? ? Please specify the number of virtual CPUs for the VM (Defaults to appliance OVF value): [4]:? ? ? ? ? ? You may specify a unicast MAC address for the VM or accept a randomly generated default [00:16:3e:5d:72:8a]:? ? ? ? ? ? How should the engine VM network be configured (DHCP, Static)[DHCP]? Static ? ? ? ? ? Please enter the IP address to be used for the engine VM [192.168.122.2]: 192.168.122.211 [ INFO ?] The engine VM will be configured to use 192.168.122.211/24 ? ? ? ? ? Please provide a comma-separated list (max 3) of IP addresses of domain name servers for the engine VM ? ? ? ? ? Engine VM DNS (leave it empty to skip) [192.168.122.1]:? ? ? ? ? ? Add lines for the appliance itself and for this host to /etc/hosts on the engine VM? ? ? ? ? ? Note: ensuring that this host could resolve the engine VM hostname is still up to you ? ? ? ? ? (Yes, No)[No]? ? ? ? ? ? ? ? ? ? ? --== HOSTED ENGINE CONFIGURATION ==-- ? ? ? ? ? ? ? ? ? ? Enter engine admin password:? ? ? ? ? ? Confirm engine admin password:? ? ? ? ? ? Please provide the name of the SMTP server through which we will send notifications [localhost]:? ? ? ? ? ? Please provide the TCP port number of the SMTP server [25]:? ? ? ? ? ? Please provide the email address from which notifications will be sent [root at localhost]:? ? ? ? ? ? Please provide a comma-separated list of email addresses which will get notifications [root at localhost]:? [ INFO ?] Stage: Setup validation [WARNING] Cannot validate host name settings, reason: resolved host does not match any of the local addresses [ ERROR ] Host name is not valid: localhost.localdomain resolves to 127.0.0.1 and not all of them can be mapped to non loopback devices on this host [ ERROR ] Failed to execute stage 'Setup validation': Host name is not valid: localhost.localdomain resolves to 127.0.0.1 and not all of them can be mapped to non loopback devices on this host [ INFO ?] Stage: Clean up [ INFO ?] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20180404182053.conf' [ INFO ?] Stage: Pre-termination [ INFO ?] Stage: Termination [ ERROR ] Hosted Engine deployment failed ? ? ? ? ? Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20180404181811-aq5ord.log _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users -------------- next part -------------- An HTML attachment was scrubbed... URL: From msivak at redhat.com Wed Apr 4 11:29:36 2018 From: msivak at redhat.com (Martin Sivak) Date: Wed, 4 Apr 2018 13:29:36 +0200 Subject: [ovirt-users] hosted-engine deploy error In-Reply-To: <1522839042400.sh3g4k5aqedpxv2szx1cwsyj@android.mail.163.com> References: <20180404102845.3554B7200CF@webmail.sinamail.sina.com.cn> <1522839042400.sh3g4k5aqedpxv2szx1cwsyj@android.mail.163.com> Message-ID: Hi, the hostname is invalid for hosted engine because it is set to localhost.localdomain. Check the shell prompt, do you see the localhost there? [root at localhost ~]# hosted-engine --deploy You can change the hostname by using many different tools, check https://fedoramagazine.org/set-hostname-fedora/ for examples. Most of them (if not all) should be valid for CentOS as well. The hostname you set must be resolvable to IP and that IP has to point back to the host you are on. Best regards Martin Sivak On Wed, Apr 4, 2018 at 12:50 PM, dhy336 wrote: > thanks, but i do not know why is my hostname invalid? > > > ?2018?04?04? 18:41?Simone Tiraboschi ??? > > > On Wed, Apr 4, 2018 at 12:28 PM, wrote: >> >> Hi, >> >> I deloy hosted-engine, by this >> blog,https://ovirt.org/documentation/self-hosted/chap-Deploying_Self-Hosted_Engine/ >> but I am facing some error.who may give me some advise? >> >> [root at localhost ~]# hosted-engine --deploy > > > ^^^ > > The error is here: please set a valid hostname for your host: the engine VM > should be able to reach it. > If you add the host as localhost the engine VM will reach itself and it's > not what we want. > > If you don'y have a working DNS system, hosted-engine-setup will ask about > injecting an entry for you under /etc/hosts on the engine VM but you still > need a valid hostname. > > >> >> >> >> >> --== STORAGE CONFIGURATION ==-- >> >> Please specify the storage you would like to use (glusterfs, >> iscsi, fc, nfs3, nfs4)[nfs3]: >> Please specify the full shared storage connection path to use >> (example: host:/path): 192.168.122.134:/home/exports/hosted-engine >> >> --== HOST NETWORK CONFIGURATION ==-- >> >> iptables was detected on your computer, do you wish setup to >> configure it? (Yes, No)[Yes]: >> Please indicate a pingable gateway IP address [192.168.122.1]: >> Please indicate a nic to set ovirtmgmt bridge on: (eth0) [eth0]: >> >> --== VM CONFIGURATION ==-- >> >> The following appliance have been found on your system: >> [1] - The oVirt Engine Appliance image (OVA) - >> 4.1-20180124.1.el7.centos >> [2] - Directly select an OVA file >> Please select an appliance (1, 2) [1]: >> [ INFO ] Verifying its sha1sum >> [ INFO ] Checking OVF archive content (could take a few minutes depending >> on archive size) >> [ INFO ] Checking OVF XML content (could take a few minutes depending on >> archive size) >> Please specify the console type you would like to use to connect >> to the VM (vnc, spice) [vnc]: >> [ INFO ] Detecting host timezone. >> Would you like to use cloud-init to customize the appliance on >> the first boot (Yes, No)[Yes]? >> Would you like to generate on-fly a cloud-init ISO image (of >> no-cloud type) >> or do you have an existing one (Generate, Existing)[Generate]? >> Please provide the FQDN you would like to use for the engine >> appliance. >> Note: This will be the FQDN of the engine VM you are now going >> to launch, >> it should not point to the base host or to any other existing >> machine. >> Engine VM FQDN: (leave it empty to skip): []: engine.tchyp.com >> Please provide the domain name you would like to use for the >> engine appliance. >> Engine VM domain: [tchyp.com] >> Automatically execute engine-setup on the engine appliance on >> first boot (Yes, No)[Yes]? >> Automatically restart the engine VM as a monitored service after >> engine-setup (Yes, No)[Yes]? >> Enter root password that will be used for the engine appliance >> (leave it empty to skip): >> [WARNING] Skipping appliance root password >> Enter ssh public key for the root user that will be used for the >> engine appliance (leave it empty to skip): >> [WARNING] Skipping appliance root ssh public key >> Do you want to enable ssh access for the root user (yes, no, >> without-password) [yes]: >> [WARNING] The oVirt engine appliance is not configured with a default >> password, please consider configuring it via cloud-init >> Please specify the size of the VM disk in GB: [58]: >> [WARNING] Minimum requirements not met by available memory: Required: 4096 >> MB. Available: 3064 MB >> Please specify the memory size of the VM in MB (Defaults to >> maximum available): [3064]: >> [WARNING] Minimum requirements for memory size not met >> Continue with specified memory size? (Yes, No) [No]: yes >> The following CPU types are supported by this host: >> - model_Haswell-noTSX: Intel Haswell-noTSX Family >> - model_SandyBridge: Intel SandyBridge Family >> - model_Westmere: Intel Westmere Family >> - model_Nehalem: Intel Nehalem Family >> - model_Penryn: Intel Penryn Family >> - model_Conroe: Intel Conroe Family >> Please specify the CPU type to be used by the VM >> [model_Haswell-noTSX]: >> Please specify the number of virtual CPUs for the VM (Defaults >> to appliance OVF value): [4]: >> You may specify a unicast MAC address for the VM or accept a >> randomly generated default [00:16:3e:5d:72:8a]: >> How should the engine VM network be configured (DHCP, >> Static)[DHCP]? Static >> Please enter the IP address to be used for the engine VM >> [192.168.122.2]: 192.168.122.211 >> [ INFO ] The engine VM will be configured to use 192.168.122.211/24 >> Please provide a comma-separated list (max 3) of IP addresses of >> domain name servers for the engine VM >> Engine VM DNS (leave it empty to skip) [192.168.122.1]: >> Add lines for the appliance itself and for this host to >> /etc/hosts on the engine VM? >> Note: ensuring that this host could resolve the engine VM >> hostname is still up to you >> (Yes, No)[No] >> >> --== HOSTED ENGINE CONFIGURATION ==-- >> >> Enter engine admin password: >> Confirm engine admin password: >> Please provide the name of the SMTP server through which we will >> send notifications [localhost]: >> Please provide the TCP port number of the SMTP server [25]: >> Please provide the email address from which notifications will >> be sent [root at localhost]: >> Please provide a comma-separated list of email addresses which >> will get notifications [root at localhost]: >> [ INFO ] Stage: Setup validation >> [WARNING] Cannot validate host name settings, reason: resolved host does >> not match any of the local addresses >> [ ERROR ] Host name is not valid: localhost.localdomain resolves to >> 127.0.0.1 and not all of them can be mapped to non loopback devices on this >> host >> [ ERROR ] Failed to execute stage 'Setup validation': Host name is not >> valid: localhost.localdomain resolves to 127.0.0.1 and not all of them can >> be mapped to non loopback devices on this host >> [ INFO ] Stage: Clean up >> [ INFO ] Generating answer file >> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20180404182053.conf' >> [ INFO ] Stage: Pre-termination >> [ INFO ] Stage: Termination >> [ ERROR ] Hosted Engine deployment failed >> Log file is located at >> /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20180404181811-aq5ord.log >> >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > From stefan.wendler at tngtech.com Wed Apr 4 11:29:56 2018 From: stefan.wendler at tngtech.com (Stefan Wendler) Date: Wed, 4 Apr 2018 13:29:56 +0200 Subject: [ovirt-users] External Provider https (unknown error) Message-ID: <23bb44c6-6014-2d24-5b2f-22b7f6f41ed9@tngtech.com> Hi, I am currently trying to attach Glance (OpenStack Image) and Cinder (OpenStack Volume) as external provider and am facing a problem when trying to use https in the Provider-URL on an ovirt 3.6 and 4.1 cluster. The Provider-URL I am using is in the form: https://:9292 (or port 8776 for Cinder - is either a fqdn or an IP-Address) Whenever I press the "Test" button in the "Add Provider" dialog I get the message "Test Failed (unknown error)." There is no entry in any logfile whatsoever (at least not in any logs that are associated with ovirt). I would expect an ssl cert dialog here. I can telnet to the destination ports from the engine and the nodes so Clance and Cinder are reachable I have also read that this might happen, if there is a corrupted /var/lib/ovirt-engine/external_truststore But this file is not even existing and when i create it by hand, it is not touched. How can I get this to work or even get an error message that gives me a hint where to look? Thanks for your support, Stefan From phbailey at redhat.com Wed Apr 4 11:47:25 2018 From: phbailey at redhat.com (Phillip Bailey) Date: Wed, 4 Apr 2018 07:47:25 -0400 Subject: [ovirt-users] =?utf-8?b?44CQaGVscOOAkUJ1aWxkIGEgbG9jYWwgZGV2ZWxv?= =?utf-8?q?pment_environment?= In-Reply-To: References: Message-ID: Hi, You should be able to find all of the necessary details for setting up your development environment in the ovirt-engine README [1], except for one additional step [2] that requires you to do a little extra work on the database. I hope this helps! -Phillip Bailey [1] https://github.com/oVirt/ovirt-engine/blob/master/README.adoc [2] http://lists.ovirt.org/pipermail/devel/2018-January/032452.html On Tue, Apr 3, 2018 at 7:22 AM, TT-mao <1523688226 at qq.com> wrote: > Hi, guys: > I am currently trying to build an ovirt development environment > (including engine and vdsm) locally using official documentation, but it > will never build successfully. > First, I successfully built the rpm package through ( > https://www.ovirt.org/develop/developer-guide/vdsm/developers/) > But the vdsm rpm package that I built can't be applied to the engine > environment. Add hosts on the ovirt gui interface. The engine backend will > reinstall vdsm. > > How do you create a local development environment? > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From sradco at redhat.com Wed Apr 4 12:17:07 2018 From: sradco at redhat.com (Shirly Radco) Date: Wed, 4 Apr 2018 15:17:07 +0300 Subject: [ovirt-users] Engine reports In-Reply-To: References: Message-ID: Hi Peter, The installation instructions currently support OpenShift 3.6. I'm now working on updating them to support 3.9. You currently have 3.10 installed. Please install OpenShift 3.9 using this repository https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo And add the following file to your vm Run: vi /root/ansible-inventory-origin-39-aio Add: -------------- [OSEv3:children] nodes masters etcd [OSEv3:vars] ansible_connection=local openshift_release=v3.9 openshift_logging_install_logging=true short_version=3.9 openshift_deployment_type=origin openshift_master_identity_providers=[{'mappingMethod': 'lookup', 'challenge': 'true', 'login': 'true', 'kind': 'AllowAllPasswordIdentityProvider', 'name': 'allow_all'}] # bug - doesn't use correct tag openshift_logging_image_version=v3.9 openshift_logging_elasticsearch_proxy_image_version=v1.0.0 openshift_logging_es_allow_external=True openshift_logging_use_mux=True openshift_logging_mux_allow_external=True openshift_logging_mux_file_buffer_storage_type=hostmount openshift_logging_elasticsearch_storage_type=hostmount openshift_logging_elasticsearch_hostmount_path=/var/lib/elasticsearch [nodes] localhost storage=True openshift_node_labels="{'region': 'infra'}" openshift_schedulable=True [masters] localhost storage=True openshift_node_labels="{'region': 'infra'}" openshift_schedulable=True [etcd] localhost storage=True openshift_node_labels="{'region': 'infra'}" openshift_schedulable=True ------------ Save and exit. ***Please make sure that you use /var as your Elasticsearch persistent storage directory. And when you run the OpenShift ansible ( https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible) use the file you just created like this: # cd /usr/share/ansible/openshift-ansible # (or wherever you cloned the git repo if using git) ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e @/root/vars.yaml -i /root/*ansible-inventory-origin-39-aio* playbooks/byo/config.yml Best regards, -- SHIRLY RADCO BI SeNIOR SOFTWARE ENGINEER Red Hat Israel TRIED. TESTED. TRUSTED. On Wed, Apr 4, 2018 at 12:17 PM, Peter Hudec wrote: > Tried to install ovirt metrics, but got error > > ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e > @/root/vars.yaml -i /root/ansible-inventory-origin-37-aio > playbooks/byo/config.yml > > 1. Hosts: localhost > Play: Determine openshift_version to configure on first master > Task: For an RPM install, abort when the release requested does > not match the available version. > Message: You requested openshift_release 3.7, which is not matched by > the latest OpenShift RPM we detected as origin-3.10.0 > on host localhost. > We will only install the latest RPMs, so please ensure > you are getting the release > you expect. You may need to adjust your Ansible > inventory, modify the repositories > available on the host, or run the appropriate OpenShift > upgrade playbook. > > regards > Peter > > > On 04/04/2018 09:13, Fred Rolland wrote: > > Hi, > > > > Check these links: > > > > https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ > > https://ovirt.org/develop/release-management/features/ > metrics/metrics-store/ > > > > Regards, > > Fred > > > > On Tue, Apr 3, 2018 at 9:38 AM, Anantha Raghava > > > > > wrote: > > > > Hi, > > > > I see that oVirt DWH is installed with Version 4.2.x. Now, how do I > > take the reports? I version 3.5, we had Jasper reports module using > > which we could take utilization reports. Can we do something similar > > here? > > > > -- > > > > Thanks & Regards, > > > > > > Anantha Raghava > > > > > > Do not print this e-mail unless required. Save Paper & trees. > > > > > > _______________________________________________ > > Users mailing list > > Users at ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > > > > > > > _______________________________________________ > > Users mailing list > > Users at ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > > > -- > *Peter Hudec* > Infra?trukt?rny architekt > phudec at cnc.sk > > *CNC, a.s.* > Borsk? 6, 841 04 Bratislava > Recepcia: +421 2 35 000 100 > > Mobil:+421 905 997 203 > *www.cnc.sk* > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From sradco at redhat.com Wed Apr 4 12:18:53 2018 From: sradco at redhat.com (Shirly Radco) Date: Wed, 4 Apr 2018 15:18:53 +0300 Subject: [ovirt-users] Engine reports In-Reply-To: References: Message-ID: Adding Nicolas since he hit the same issue. -- SHIRLY RADCO BI SeNIOR SOFTWARE ENGINEER Red Hat Israel TRIED. TESTED. TRUSTED. On Wed, Apr 4, 2018 at 3:17 PM, Shirly Radco wrote: > Hi Peter, > > The installation instructions currently support OpenShift 3.6. > > I'm now working on updating them to support 3.9. > > You currently have 3.10 installed. > > Please install OpenShift 3.9 using this repository > https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo > > And add the following file to your vm > > Run: > vi /root/ansible-inventory-origin-39-aio > > Add: > > -------------- > [OSEv3:children] > nodes > masters > etcd > > [OSEv3:vars] > ansible_connection=local > openshift_release=v3.9 > openshift_logging_install_logging=true > short_version=3.9 > openshift_deployment_type=origin > openshift_master_identity_providers=[{'mappingMethod': 'lookup', > 'challenge': 'true', 'login': 'true', 'kind': ' > AllowAllPasswordIdentityProvider', 'name': 'allow_all'}] > # bug - doesn't use correct tag > openshift_logging_image_version=v3.9 > openshift_logging_elasticsearch_proxy_image_version=v1.0.0 > > openshift_logging_es_allow_external=True > openshift_logging_use_mux=True > openshift_logging_mux_allow_external=True > openshift_logging_mux_file_buffer_storage_type=hostmount > openshift_logging_elasticsearch_storage_type=hostmount > openshift_logging_elasticsearch_hostmount_path=/var/lib/elasticsearch > > [nodes] > localhost storage=True openshift_node_labels="{'region': 'infra'}" > openshift_schedulable=True > > [masters] > localhost storage=True openshift_node_labels="{'region': 'infra'}" > openshift_schedulable=True > > [etcd] > localhost storage=True openshift_node_labels="{'region': 'infra'}" > openshift_schedulable=True > > > ------------ > > Save and exit. > > > ***Please make sure that you use /var as your Elasticsearch persistent > storage directory. > > And when you run the OpenShift ansible (https://www.ovirt.org/ > develop/release-management/features/metrics/setting-up- > viaq-logging/#running-ansible) use the file you just created like this: > > # cd /usr/share/ansible/openshift-ansible > # (or wherever you cloned the git repo if using git) > ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e > @/root/vars.yaml -i /root/*ansible-inventory-origin-39-aio* > playbooks/byo/config.yml > > Best regards, > > -- > > SHIRLY RADCO > > BI SeNIOR SOFTWARE ENGINEER > > Red Hat Israel > > TRIED. TESTED. TRUSTED. > > On Wed, Apr 4, 2018 at 12:17 PM, Peter Hudec wrote: > >> Tried to install ovirt metrics, but got error >> >> ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e >> @/root/vars.yaml -i /root/ansible-inventory-origin-37-aio >> playbooks/byo/config.yml >> >> 1. Hosts: localhost >> Play: Determine openshift_version to configure on first master >> Task: For an RPM install, abort when the release requested does >> not match the available version. >> Message: You requested openshift_release 3.7, which is not matched >> by >> the latest OpenShift RPM we detected as origin-3.10.0 >> on host localhost. >> We will only install the latest RPMs, so please ensure >> you are getting the release >> you expect. You may need to adjust your Ansible >> inventory, modify the repositories >> available on the host, or run the appropriate OpenShift >> upgrade playbook. >> >> regards >> Peter >> >> >> On 04/04/2018 09:13, Fred Rolland wrote: >> > Hi, >> > >> > Check these links: >> > >> > https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ >> > https://ovirt.org/develop/release-management/features/metric >> s/metrics-store/ >> > >> > Regards, >> > Fred >> > >> > On Tue, Apr 3, 2018 at 9:38 AM, Anantha Raghava >> > > >> > wrote: >> > >> > Hi, >> > >> > I see that oVirt DWH is installed with Version 4.2.x. Now, how do I >> > take the reports? I version 3.5, we had Jasper reports module using >> > which we could take utilization reports. Can we do something similar >> > here? >> > >> > -- >> > >> > Thanks & Regards, >> > >> > >> > Anantha Raghava >> > >> > >> > Do not print this e-mail unless required. Save Paper & trees. >> > >> > >> > _______________________________________________ >> > Users mailing list >> > Users at ovirt.org >> > http://lists.ovirt.org/mailman/listinfo/users >> > >> > >> > >> > >> > >> > _______________________________________________ >> > Users mailing list >> > Users at ovirt.org >> > http://lists.ovirt.org/mailman/listinfo/users >> > >> >> >> -- >> *Peter Hudec* >> Infra?trukt?rny architekt >> phudec at cnc.sk >> >> *CNC, a.s.* >> Borsk? 6, 841 04 Bratislava >> Recepcia: +421 2 35 000 100 >> >> Mobil:+421 905 997 203 >> *www.cnc.sk* >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jaymef at gmail.com Wed Apr 4 13:13:32 2018 From: jaymef at gmail.com (Jayme) Date: Wed, 4 Apr 2018 10:13:32 -0300 Subject: [ovirt-users] Hardware critique Message-ID: I'm spec'ing hardware for a 3-node oVirt build (on somewhat of a budget). I plan to do 20-30 Linux VMs most of them very light weight + a couple of heavier hitting web and DB servers with frequent rsync backups. Some have a lot of small files from large github repos etc. 3X of the following: Dell PowerEdge R720 2x 2.9 GHz 8 Core E5-2690 (SR0L0) 256GB RAM PERC H710 2x10GB Nic Boot/OS will likely be two cheaper small sata/ssd in raid 1. Gluster bricks comprised of 4x2TB WD Gold 7200RPM SATA HDDs in RAID 10 per server. Using a replica 3 setup (and I'm thinking right now with no arbiter for extra redundancy, although I'm not sure what the performance hit may be as a result). Will this allow for two host failure or just one? I've been really struggling with storage choices, it seems very difficult to predict the performance of glusterFS due to the variance in hardware (everyone is using something different). I'm not sure if the performance will be adequate enough for my needs. I will be using an all ready existing Netgear XS716T 10GB switch for Gluster storage network. In addition I plan to build another simple glusterFS storage server that I can use to georeplicate the gluster volume to for DR purposes and use existing hardware to build an independent standby oVirt host that is able to start up a few high priority VMs from the georeplicated glusterFS volume if for some reason the primary oVirt cluster/glusterFS volume ever failed. I would love to hear any advice or critiques on this plan. Thanks! -------------- next part -------------- An HTML attachment was scrubbed... URL: From phudec at cnc.sk Wed Apr 4 13:40:46 2018 From: phudec at cnc.sk (Peter Hudec) Date: Wed, 4 Apr 2018 15:40:46 +0200 Subject: [ovirt-users] Engine reports In-Reply-To: References: Message-ID: Hi SHIRLY, I had clean server before installing. I will try to follow your advice. Peter On 04/04/2018 14:17, Shirly Radco wrote: > Hi Peter, > > The installation instructions currently support OpenShift 3.6. > > I'm now working on updating them to support 3.9. > > You currently have 3.10 installed. > > Please install OpenShift 3.9 using this repository? > https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo > > And add the following file to your vm? > > Run: > vi /root/ansible-inventory-origin-39-aio > > Add: > > -------------- > [OSEv3:children] > nodes > masters > etcd > > [OSEv3:vars] > ansible_connection=local > openshift_release=v3.9 > openshift_logging_install_logging=true > short_version=3.9 > openshift_deployment_type=origin > openshift_master_identity_providers=[{'mappingMethod': 'lookup', > 'challenge': 'true', 'login': 'true', 'kind': > 'AllowAllPasswordIdentityProvider', 'name': 'allow_all'}] > # bug - doesn't use correct tag > openshift_logging_image_version=v3.9 > openshift_logging_elasticsearch_proxy_image_version=v1.0.0 > > openshift_logging_es_allow_external=True > openshift_logging_use_mux=True > openshift_logging_mux_allow_external=True > openshift_logging_mux_file_buffer_storage_type=hostmount > openshift_logging_elasticsearch_storage_type=hostmount > openshift_logging_elasticsearch_hostmount_path=/var/lib/elasticsearch > > [nodes] > localhost storage=True openshift_node_labels="{'region': 'infra'}" > openshift_schedulable=True > > [masters] > localhost storage=True openshift_node_labels="{'region': 'infra'}" > openshift_schedulable=True > > [etcd] > localhost storage=True openshift_node_labels="{'region': 'infra'}" > openshift_schedulable=True > > > ------------ > > Save and exit. > > > ***Please make sure that you use /var as your Elasticsearch persistent > storage directory. > > And when you run the OpenShift ansible > (https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible) > use the file you just created like this: > > # cd /usr/share/ansible/openshift-ansible > # (or wherever you cloned the git repo if using git) > ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e > @/root/vars.yaml -i /root/*ansible-inventory-origin-39-aio* > playbooks/byo/config.yml > > Best regards, > > -- > > SHIRLY?RADCO > > BI SeNIOR SOFTWARE ENGINEER > > Red Hat?Israel > > > TRIED. TESTED. TRUSTED. > > > On Wed, Apr 4, 2018 at 12:17 PM, Peter Hudec > wrote: > > Tried to install ovirt metrics, but got error > > ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e > @/root/vars.yaml -i /root/ansible-inventory-origin-37-aio > playbooks/byo/config.yml > > ? 1. Hosts:? ? localhost > ? ? ?Play:? ? ?Determine openshift_version to configure on first master > ? ? ?Task:? ? ?For an RPM install, abort when the release requested does > not match the available version. > ? ? ?Message:? You requested openshift_release 3.7, which is not > matched by > ? ? ? ? ? ? ? ?the latest OpenShift RPM we detected as origin-3.10.0 > ? ? ? ? ? ? ? ?on host localhost. > ? ? ? ? ? ? ? ?We will only install the latest RPMs, so please ensure > you are getting the release > ? ? ? ? ? ? ? ?you expect. You may need to adjust your Ansible > inventory, modify the repositories > ? ? ? ? ? ? ? ?available on the host, or run the appropriate OpenShift > upgrade playbook. > > ? ? ? ? regards > ? ? ? ? ? ? ? ? Peter > > > On 04/04/2018 09:13, Fred Rolland wrote: > > Hi, > > > > Check these links: > > > > https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ > > > https://ovirt.org/develop/release-management/features/metrics/metrics-store/ > > > > > Regards, > > Fred > > > > On Tue, Apr 3, 2018 at 9:38 AM, Anantha Raghava > > > >> > > wrote: > > > >? ? ?Hi, > > > >? ? ?I see that oVirt DWH is installed with Version 4.2.x. Now, how do I > >? ? ?take the reports? I version 3.5, we had Jasper reports module using > >? ? ?which we could take utilization reports. Can we do something similar > >? ? ?here? > > > >? ? ?-- > > > >? ? ?Thanks & Regards, > > > > > >? ? ?Anantha Raghava > > > > > >? ? ?Do not print this e-mail unless required. Save Paper & trees. > > > > > >? ? ?_______________________________________________ > >? ? ?Users mailing list > >? ? ?Users at ovirt.org > > > >? ? ?http://lists.ovirt.org/mailman/listinfo/users > > >? ? ? > > > > > > > > > > > _______________________________________________ > > Users mailing list > > Users at ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > -- > *Peter Hudec* > Infra?trukt?rny architekt > phudec at cnc.sk > > > *CNC,?a.s.* > Borsk? 6,?841 04 Bratislava > Recepcia:?+421 2? 35 000 100 > > Mobil:+421?905 997 203 > *www.cnc.sk * > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > -- *Peter Hudec* Infra?trukt?rny architekt phudec at cnc.sk *CNC,?a.s.* Borsk? 6,?841 04 Bratislava Recepcia:?+421 2? 35 000 100 Mobil:+421?905 997 203 *www.cnc.sk* From daniel.menzel at hhi.fraunhofer.de Wed Apr 4 13:36:36 2018 From: daniel.menzel at hhi.fraunhofer.de (Daniel Menzel) Date: Wed, 4 Apr 2018 15:36:36 +0200 Subject: [ovirt-users] Decrease downtime for HA Message-ID: <70878a1e-04f1-8241-b2d8-d9474893538b@hhi.fraunhofer.de> Hello, we're successfully using a setup with 4 Nodes and a replicated Gluster for storage. The engine is self hosted. What we're dealing with at the moment is the high availability: If a node fails (for example simulated by a forced power loss) the engine comes back up online withing ~2min. But guests (having the HA option enabled) come back online only after a very long grace time of ~5min. As we have a reliable network (40 GbE) and reliable servers I think that the default grace times are way too high for us - is there any possibility to change those values? Thanks in advance! Daniel From phudec at cnc.sk Wed Apr 4 14:07:55 2018 From: phudec at cnc.sk (Peter Hudec) Date: Wed, 4 Apr 2018 16:07:55 +0200 Subject: [ovirt-users] Engine reports In-Reply-To: References: Message-ID: almost the same issue, the versio for openshoft release changed to 3.9 Failure summary: 1. Hosts: localhost Play: Determine openshift_version to configure on first master Task: For an RPM install, abort when the release requested does not match the available version. Message: You requested openshift_release 3.9, which is not matched by the latest OpenShift RPM we detected as origin-3.10.0 on host localhost. We will only install the latest RPMs, so please ensure you are getting the release you expect. You may need to adjust your Ansible inventory, modify the repositories available on the host, or run the appropriate OpenShift upgrade playbook. On 04/04/2018 14:18, Shirly Radco wrote: > Adding Nicolas since he hit the same issue. > > -- > > SHIRLY?RADCO > > BI SeNIOR SOFTWARE ENGINEER > > Red Hat?Israel > > > TRIED. TESTED. TRUSTED. > > > On Wed, Apr 4, 2018 at 3:17 PM, Shirly Radco > wrote: > > Hi Peter, > > The installation instructions currently support OpenShift 3.6. > > I'm now working on updating them to support 3.9. > > You currently have 3.10 installed. > > Please install OpenShift 3.9 using this repository? > https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo > > > And add the following file to your vm? > > Run: > vi /root/ansible-inventory-origin-39-aio > > Add: > > -------------- > [OSEv3:children] > nodes > masters > etcd > > [OSEv3:vars] > ansible_connection=local > openshift_release=v3.9 > openshift_logging_install_logging=true > short_version=3.9 > openshift_deployment_type=origin > openshift_master_identity_providers=[{'mappingMethod': 'lookup', > 'challenge': 'true', 'login': 'true', 'kind': > 'AllowAllPasswordIdentityProvider', 'name': 'allow_all'}] > # bug - doesn't use correct tag > openshift_logging_image_version=v3.9 > openshift_logging_elasticsearch_proxy_image_version=v1.0.0 > > openshift_logging_es_allow_external=True > openshift_logging_use_mux=True > openshift_logging_mux_allow_external=True > openshift_logging_mux_file_buffer_storage_type=hostmount > openshift_logging_elasticsearch_storage_type=hostmount > openshift_logging_elasticsearch_hostmount_path=/var/lib/elasticsearch > > [nodes] > localhost storage=True openshift_node_labels="{'region': 'infra'}" > openshift_schedulable=True > > [masters] > localhost storage=True openshift_node_labels="{'region': 'infra'}" > openshift_schedulable=True > > [etcd] > localhost storage=True openshift_node_labels="{'region': 'infra'}" > openshift_schedulable=True > > > ------------ > > Save and exit. > > > ***Please make sure that you use /var as your Elasticsearch > persistent storage directory. > > And when you run the OpenShift ansible > (https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible > ) > use the file you just created like this: > > # cd /usr/share/ansible/openshift-ansible > # (or wherever you cloned the git repo if using git) > ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e > @/root/vars.yaml -i /root/*ansible-inventory-origin-39-aio* > playbooks/byo/config.yml > > Best regards, > > -- > > SHIRLY?RADCO > > BI SeNIOR SOFTWARE ENGINEER > > Red Hat?Israel > > > TRIED. TESTED. TRUSTED. > > > On Wed, Apr 4, 2018 at 12:17 PM, Peter Hudec > wrote: > > Tried to install ovirt metrics, but got error > > ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e > @/root/vars.yaml -i /root/ansible-inventory-origin-37-aio > playbooks/byo/config.yml > > ? 1. Hosts:? ? localhost > ? ? ?Play:? ? ?Determine openshift_version to configure on first > master > ? ? ?Task:? ? ?For an RPM install, abort when the release > requested does > not match the available version. > ? ? ?Message:? You requested openshift_release 3.7, which is not > matched by > ? ? ? ? ? ? ? ?the latest OpenShift RPM we detected as origin-3.10.0 > ? ? ? ? ? ? ? ?on host localhost. > ? ? ? ? ? ? ? ?We will only install the latest RPMs, so please > ensure > you are getting the release > ? ? ? ? ? ? ? ?you expect. You may need to adjust your Ansible > inventory, modify the repositories > ? ? ? ? ? ? ? ?available on the host, or run the appropriate > OpenShift > upgrade playbook. > > ? ? ? ? regards > ? ? ? ? ? ? ? ? Peter > > > On 04/04/2018 09:13, Fred Rolland wrote: > > Hi, > > > > Check these links: > > > > https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ > > > https://ovirt.org/develop/release-management/features/metrics/metrics-store/ > > > > > Regards, > > Fred > > > > On Tue, Apr 3, 2018 at 9:38 AM, Anantha Raghava > > > >> > > wrote: > > > >? ? ?Hi, > > > >? ? ?I see that oVirt DWH is installed with Version 4.2.x. Now, how do I > >? ? ?take the reports? I version 3.5, we had Jasper reports module using > >? ? ?which we could take utilization reports. Can we do something similar > >? ? ?here? > > > >? ? ?-- > > > >? ? ?Thanks & Regards, > > > > > >? ? ?Anantha Raghava > > > > > >? ? ?Do not print this e-mail unless required. Save Paper & trees. > > > > > >? ? ?_______________________________________________ > >? ? ?Users mailing list > >? ? ?Users at ovirt.org > > > >? ? ?http://lists.ovirt.org/mailman/listinfo/users > > >? ? ? > > > > > > > > > > > _______________________________________________ > > Users mailing list > > Users at ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > -- > *Peter Hudec* > Infra?trukt?rny architekt > phudec at cnc.sk > > > *CNC,?a.s.* > Borsk? 6,?841 04 Bratislava > Recepcia:?+421 2? 35 000 100 > > Mobil:+421?905 997 203 > *www.cnc.sk * > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > > -- *Peter Hudec* Infra?trukt?rny architekt phudec at cnc.sk *CNC,?a.s.* Borsk? 6,?841 04 Bratislava Recepcia:?+421 2? 35 000 100 Mobil:+421?905 997 203 *www.cnc.sk* From sradco at redhat.com Wed Apr 4 14:22:19 2018 From: sradco at redhat.com (Shirly Radco) Date: Wed, 4 Apr 2018 17:22:19 +0300 Subject: [ovirt-users] Engine reports In-Reply-To: References: Message-ID: -- SHIRLY RADCO BI SeNIOR SOFTWARE ENGINEER Red Hat Israel TRIED. TESTED. TRUSTED. On Wed, Apr 4, 2018 at 5:07 PM, Peter Hudec wrote: > almost the same issue, the versio for openshoft release changed to 3.9 > > Failure summary: > > > 1. Hosts: localhost > Play: Determine openshift_version to configure on first master > Task: For an RPM install, abort when the release requested does > not match the available version. > Message: You requested openshift_release 3.9, which is not matched by > the latest OpenShift RPM we detected as origin-3.10.0 > on host localhost. > We will only install the latest RPMs, so please ensure > you are getting the release > you expect. You may need to adjust your Ansible > inventory, modify the repositories > available on the host, or run the appropriate OpenShift > upgrade playbook. > > What is the rpm version installed of OpenShift origin? Do you perhaps have another repo that includes the OpenShift origin-3.10.0? > On 04/04/2018 14:18, Shirly Radco wrote: > > Adding Nicolas since he hit the same issue. > > > > -- > > > > SHIRLY RADCO > > > > BI SeNIOR SOFTWARE ENGINEER > > > > Red Hat Israel > > > > > > TRIED. TESTED. TRUSTED. > > > > > > On Wed, Apr 4, 2018 at 3:17 PM, Shirly Radco > > wrote: > > > > Hi Peter, > > > > The installation instructions currently support OpenShift 3.6. > > > > I'm now working on updating them to support 3.9. > > > > You currently have 3.10 installed. > > > > Please install OpenShift 3.9 using this repository > > https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo > > > > > > And add the following file to your vm > > > > Run: > > vi /root/ansible-inventory-origin-39-aio > > > > Add: > > > > -------------- > > [OSEv3:children] > > nodes > > masters > > etcd > > > > [OSEv3:vars] > > ansible_connection=local > > openshift_release=v3.9 > > openshift_logging_install_logging=true > > short_version=3.9 > > openshift_deployment_type=origin > > openshift_master_identity_providers=[{'mappingMethod': 'lookup', > > 'challenge': 'true', 'login': 'true', 'kind': > > 'AllowAllPasswordIdentityProvider', 'name': 'allow_all'}] > > # bug - doesn't use correct tag > > openshift_logging_image_version=v3.9 > > openshift_logging_elasticsearch_proxy_image_version=v1.0.0 > > > > openshift_logging_es_allow_external=True > > openshift_logging_use_mux=True > > openshift_logging_mux_allow_external=True > > openshift_logging_mux_file_buffer_storage_type=hostmount > > openshift_logging_elasticsearch_storage_type=hostmount > > openshift_logging_elasticsearch_hostmount_path=/ > var/lib/elasticsearch > > > > [nodes] > > localhost storage=True openshift_node_labels="{'region': 'infra'}" > > openshift_schedulable=True > > > > [masters] > > localhost storage=True openshift_node_labels="{'region': 'infra'}" > > openshift_schedulable=True > > > > [etcd] > > localhost storage=True openshift_node_labels="{'region': 'infra'}" > > openshift_schedulable=True > > > > > > ------------ > > > > Save and exit. > > > > > > ***Please make sure that you use /var as your Elasticsearch > > persistent storage directory. > > > > And when you run the OpenShift ansible > > (https://www.ovirt.org/develop/release-management/ > features/metrics/setting-up-viaq-logging/#running-ansible > > features/metrics/setting-up-viaq-logging/#running-ansible>) > > use the file you just created like this: > > > > # cd /usr/share/ansible/openshift-ansible > > # (or wherever you cloned the git repo if using git) > > ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e > > @/root/vars.yaml -i /root/*ansible-inventory-origin-39-aio* > > playbooks/byo/config.yml > > > > Best regards, > > > > -- > > > > SHIRLY RADCO > > > > BI SeNIOR SOFTWARE ENGINEER > > > > Red Hat Israel > > > > > > TRIED. TESTED. TRUSTED. > > > > > > On Wed, Apr 4, 2018 at 12:17 PM, Peter Hudec > > wrote: > > > > Tried to install ovirt metrics, but got error > > > > ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e > > @/root/vars.yaml -i /root/ansible-inventory-origin-37-aio > > playbooks/byo/config.yml > > > > 1. Hosts: localhost > > Play: Determine openshift_version to configure on first > > master > > Task: For an RPM install, abort when the release > > requested does > > not match the available version. > > Message: You requested openshift_release 3.7, which is not > > matched by > > the latest OpenShift RPM we detected as > origin-3.10.0 > > on host localhost. > > We will only install the latest RPMs, so please > > ensure > > you are getting the release > > you expect. You may need to adjust your Ansible > > inventory, modify the repositories > > available on the host, or run the appropriate > > OpenShift > > upgrade playbook. > > > > regards > > Peter > > > > > > On 04/04/2018 09:13, Fred Rolland wrote: > > > Hi, > > > > > > Check these links: > > > > > > https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ > > > > > https://ovirt.org/develop/release-management/features/ > metrics/metrics-store/ > > metrics/metrics-store/> > > > > > > Regards, > > > Fred > > > > > > On Tue, Apr 3, 2018 at 9:38 AM, Anantha Raghava > > > > > > > >> > > > wrote: > > > > > > Hi, > > > > > > I see that oVirt DWH is installed with Version 4.2.x. Now, > how do I > > > take the reports? I version 3.5, we had Jasper reports > module using > > > which we could take utilization reports. Can we do > something similar > > > here? > > > > > > -- > > > > > > Thanks & Regards, > > > > > > > > > Anantha Raghava > > > > > > > > > Do not print this e-mail unless required. Save Paper & > trees. > > > > > > > > > _______________________________________________ > > > Users mailing list > > > Users at ovirt.org > > > > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > Users mailing list > > > Users at ovirt.org > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > > > > > > -- > > *Peter Hudec* > > Infra?trukt?rny architekt > > phudec at cnc.sk > > > > > > *CNC, a.s.* > > Borsk? 6, 841 04 Bratislava > > Recepcia: +421 2 35 000 100 > > > > Mobil:+421 905 997 203 > > *www.cnc.sk * > > > > > > _______________________________________________ > > Users mailing list > > Users at ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > > > > > > -- > *Peter Hudec* > Infra?trukt?rny architekt > phudec at cnc.sk > > *CNC, a.s.* > Borsk? 6, 841 04 Bratislava > Recepcia: +421 2 35 000 100 > > Mobil:+421 905 997 203 > *www.cnc.sk* > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From rmeggins at redhat.com Wed Apr 4 14:26:34 2018 From: rmeggins at redhat.com (Rich Megginson) Date: Wed, 4 Apr 2018 08:26:34 -0600 Subject: [ovirt-users] Engine reports In-Reply-To: References: Message-ID: <855bb1c1-33c7-d6ec-f513-5702bc2f736c@redhat.com> On 04/04/2018 08:22 AM, Shirly Radco wrote: > > > -- > > SHIRLY RADCO > > BI SeNIOR SOFTWARE ENGINEER > > Red Hat Israel > > > TRIED. TESTED. TRUSTED. > > > On Wed, Apr 4, 2018 at 5:07 PM, Peter Hudec > wrote: > > almost the same issue, the versio for openshoft release changed to 3.9 > > Failure summary: > > > ? 1. Hosts:? ? localhost > ? ? ?Play:? ? ?Determine openshift_version to configure on first > master > ? ? ?Task:? ? ?For an RPM install, abort when the release > requested does > not match the available version. > ? ? ?Message:? You requested openshift_release 3.9, which is not > matched by > ? ? ? ? ? ? ? ?the latest OpenShift RPM we detected as origin-3.10.0 > ? ? ? ? ? ? ? ?on host localhost. > ? ? ? ? ? ? ? ?We will only install the latest RPMs, so please ensure > you are getting the release > ? ? ? ? ? ? ? ?you expect. You may need to adjust your Ansible > inventory, modify the repositories > ? ? ? ? ? ? ? ?available on the host, or run the appropriate OpenShift > upgrade playbook. > > > What is the rpm version installed of OpenShift?origin? > Do you perhaps have another repo that includes the OpenShift > origin-3.10.0? origin is the upstream version of OpenShift, which is unsupported. sudo repoquery -i origin This will tell you which repo it came from You will need to disable that repo and uninstall any packages which came from that repo Another mystery is why it is trying to install origin in the first place.? openshift-ansible with openshift_deployment_type=openshift-enterprise should not try to install origin, it should install packages with names like atomic-openshift-master, atomic-openshift-node, etc. > > > > On 04/04/2018 14:18, Shirly Radco wrote: > > Adding Nicolas since he hit the same issue. > > > > -- > > > > SHIRLY?RADCO > > > > BI SeNIOR SOFTWARE ENGINEER > > > > Red Hat?Israel > > > > > > TRIED. TESTED. TRUSTED. > > > > > > On Wed, Apr 4, 2018 at 3:17 PM, Shirly Radco > > >> wrote: > > > >? ? ?Hi Peter, > > > >? ? ?The installation instructions currently support OpenShift 3.6. > > > >? ? ?I'm now working on updating them to support 3.9. > > > >? ? ?You currently have 3.10 installed. > > > >? ? ?Please install OpenShift 3.9 using this repository > > https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo > > >? ? ? > > > > >? ? ?And add the following file to your vm > > > >? ? ?Run: > >? ? ?vi /root/ansible-inventory-origin-39-aio > > > >? ? ?Add: > > > >? ? ?-------------- > >? ? ?[OSEv3:children] > >? ? ?nodes > >? ? ?masters > >? ? ?etcd > > > >? ? ?[OSEv3:vars] > >? ? ?ansible_connection=local > >? ? ?openshift_release=v3.9 > >? ? ?openshift_logging_install_logging=true > >? ? ?short_version=3.9 > >? ? ?openshift_deployment_type=origin > >? ? ?openshift_master_identity_providers=[{'mappingMethod': 'lookup', > >? ? ?'challenge': 'true', 'login': 'true', 'kind': > >? ? ?'AllowAllPasswordIdentityProvider', 'name': 'allow_all'}] > >? ? ?# bug - doesn't use correct tag > >? ? ?openshift_logging_image_version=v3.9 > >? ? ?openshift_logging_elasticsearch_proxy_image_version=v1.0.0 > > > >? ? ?openshift_logging_es_allow_external=True > >? ? ?openshift_logging_use_mux=True > >? ? ?openshift_logging_mux_allow_external=True > >? ? ?openshift_logging_mux_file_buffer_storage_type=hostmount > >? ? ?openshift_logging_elasticsearch_storage_type=hostmount > >? ? > ?openshift_logging_elasticsearch_hostmount_path=/var/lib/elasticsearch > > > >? ? ?[nodes] > >? ? ?localhost storage=True openshift_node_labels="{'region': > 'infra'}" > >? ? ?openshift_schedulable=True > > > >? ? ?[masters] > >? ? ?localhost storage=True openshift_node_labels="{'region': > 'infra'}" > >? ? ?openshift_schedulable=True > > > >? ? ?[etcd] > >? ? ?localhost storage=True openshift_node_labels="{'region': > 'infra'}" > >? ? ?openshift_schedulable=True > > > > > >? ? ?------------ > > > >? ? ?Save and exit. > > > > > >? ? ?***Please make sure that you use /var as your Elasticsearch > >? ? ?persistent storage directory. > > > >? ? ?And when you run the OpenShift ansible > >? ? > ?(https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible > > >? ? > ? >) > >? ? ?use the file you just created like this: > > > >? ? ?# cd /usr/share/ansible/openshift-ansible > >? ? ?# (or wherever you cloned the git repo if using git) > >? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e > >? ? ?@/root/vars.yaml -i /root/*ansible-inventory-origin-39-aio* > >? ? ?playbooks/byo/config.yml > > > >? ? ?Best regards, > > > >? ? ?-- > > > >? ? ?SHIRLY?RADCO > > > >? ? ?BI SeNIOR SOFTWARE ENGINEER > > > >? ? ?Red Hat?Israel > > > >? ? ? > >? ? ?TRIED. TESTED. TRUSTED. > > > > > >? ? ?On Wed, Apr 4, 2018 at 12:17 PM, Peter Hudec > >? ? ?>> wrote: > > > >? ? ? ? ?Tried to install ovirt metrics, but got error > > > >? ? ? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e > >? ? ? ? ?@/root/vars.yaml -i /root/ansible-inventory-origin-37-aio > >? ? ? ? ?playbooks/byo/config.yml > > > >? ? ? ? ?? 1. Hosts:? ? localhost > >? ? ? ? ?? ? ?Play:? ? ?Determine openshift_version to configure > on first > >? ? ? ? ?master > >? ? ? ? ?? ? ?Task:? ? ?For an RPM install, abort when the release > >? ? ? ? ?requested does > >? ? ? ? ?not match the available version. > >? ? ? ? ?? ? ?Message:? You requested openshift_release 3.7, > which is not > >? ? ? ? ?matched by > >? ? ? ? ?? ? ? ? ? ? ? ?the latest OpenShift RPM we detected as > origin-3.10.0 > >? ? ? ? ?? ? ? ? ? ? ? ?on host localhost. > >? ? ? ? ?? ? ? ? ? ? ? ?We will only install the latest RPMs, so > please > >? ? ? ? ?ensure > >? ? ? ? ?you are getting the release > >? ? ? ? ?? ? ? ? ? ? ? ?you expect. You may need to adjust your > Ansible > >? ? ? ? ?inventory, modify the repositories > >? ? ? ? ?? ? ? ? ? ? ? ?available on the host, or run the appropriate > >? ? ? ? ?OpenShift > >? ? ? ? ?upgrade playbook. > > > >? ? ? ? ?? ? ? ? regards > >? ? ? ? ?? ? ? ? ? ? ? ? Peter > > > > > >? ? ? ? ?On 04/04/2018 09:13, Fred Rolland wrote: > >? ? ? ? ?> Hi, > >? ? ? ? ?> > >? ? ? ? ?> Check these links: > >? ? ? ? ?> > >? ? ? ? ?> > https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ > > >? ? ? ? > ? > > >? ? ? ? ?> > https://ovirt.org/develop/release-management/features/metrics/metrics-store/ > > >? ? ? ? ? > > >? ? ? ? ?> > >? ? ? ? ?> Regards, > >? ? ? ? ?> Fred > >? ? ? ? ?> > >? ? ? ? ?> On Tue, Apr 3, 2018 at 9:38 AM, Anantha Raghava > >? ? ? ? ?> > >? ? ? ? ? > > >? ? ? ? ? > >? ? ? ? ? >>> > >? ? ? ? ?> wrote: > >? ? ? ? ?> > >? ? ? ? ?>? ? ?Hi, > >? ? ? ? ?> > >? ? ? ? ?>? ? ?I see that oVirt DWH is installed with Version > 4.2.x. Now, how do I > >? ? ? ? ?>? ? ?take the reports? I version 3.5, we had Jasper > reports module using > >? ? ? ? ?>? ? ?which we could take utilization reports. Can we do > something similar > >? ? ? ? ?>? ? ?here? > >? ? ? ? ?> > >? ? ? ? ?>? ? ?-- > >? ? ? ? ?> > >? ? ? ? ?>? ? ?Thanks & Regards, > >? ? ? ? ?> > >? ? ? ? ?> > >? ? ? ? ?>? ? ?Anantha Raghava > >? ? ? ? ?> > >? ? ? ? ?> > >? ? ? ? ?>? ? ?Do not print this e-mail unless required. Save > Paper & trees. > >? ? ? ? ?> > >? ? ? ? ?> > >? ? ? ? ?>? ? ?_______________________________________________ > >? ? ? ? ?>? ? ?Users mailing list > >? ? ? ? ?> Users at ovirt.org > > > >? ? ? ? ? > >> > >? ? ? ? ?> http://lists.ovirt.org/mailman/listinfo/users > > >? ? ? ? ? > > >? ? ? ? ?>? ? ? > >? ? ? ? ? >> > >? ? ? ? ?> > >? ? ? ? ?> > >? ? ? ? ?> > >? ? ? ? ?> > >? ? ? ? ?> _______________________________________________ > >? ? ? ? ?> Users mailing list > >? ? ? ? ?> Users at ovirt.org > > > >? ? ? ? ?> http://lists.ovirt.org/mailman/listinfo/users > > >? ? ? ? ? > > >? ? ? ? ?> > > > > > >? ? ? ? ?-- > >? ? ? ? ?*Peter Hudec* > >? ? ? ? ?Infra?trukt?rny architekt > > phudec at cnc.sk > > > ?>> > > > >? ? ? ? ?*CNC,?a.s.* > >? ? ? ? ?Borsk? 6,?841 04 Bratislava > >? ? ? ? ?Recepcia:?+421 2? 35 000 100 > > > >? ? ? ? ?Mobil:+421?905 997 203 > >? ? ? ? ?*www.cnc.sk * > > >? ? ? ? ?> > > > > ?_______________________________________________ > >? ? ? ? ?Users mailing list > > Users at ovirt.org > > > http://lists.ovirt.org/mailman/listinfo/users > > >? ? ? ? ? > > > > > > > > > > -- > *Peter Hudec* > Infra?trukt?rny architekt > phudec at cnc.sk > > > *CNC,?a.s.* > Borsk? 6,?841 04 Bratislava > Recepcia:?+421 2? 35 000 100 > > Mobil:+421?905 997 203 > *www.cnc.sk * > > > From rmeggins at redhat.com Wed Apr 4 14:41:43 2018 From: rmeggins at redhat.com (Rich Megginson) Date: Wed, 4 Apr 2018 08:41:43 -0600 Subject: [ovirt-users] Engine reports In-Reply-To: <855bb1c1-33c7-d6ec-f513-5702bc2f736c@redhat.com> References: <855bb1c1-33c7-d6ec-f513-5702bc2f736c@redhat.com> Message-ID: I'm sorry.? I misunderstood the request. We are in the process of updating the instructions for installing viaq logging based on upstream origin 3.9 - https://github.com/ViaQ/Main/pull/37 In the meantime, you can follow along on that PR, and we will have instructions very soon. On 04/04/2018 08:26 AM, Rich Megginson wrote: > On 04/04/2018 08:22 AM, Shirly Radco wrote: >> >> >> -- >> >> SHIRLY RADCO >> >> BI SeNIOR SOFTWARE ENGINEER >> >> Red Hat Israel >> >> >> TRIED. TESTED. TRUSTED. >> >> >> On Wed, Apr 4, 2018 at 5:07 PM, Peter Hudec > > wrote: >> >> ??? almost the same issue, the versio for openshoft release changed >> to 3.9 >> >> ??? Failure summary: >> >> >> ??? ? 1. Hosts:? ? localhost >> ??? ? ? ?Play:? ? ?Determine openshift_version to configure on first >> ??? master >> ??? ? ? ?Task:? ? ?For an RPM install, abort when the release >> ??? requested does >> ??? not match the available version. >> ??? ? ? ?Message:? You requested openshift_release 3.9, which is not >> ??? matched by >> ??? ? ? ? ? ? ? ? ?the latest OpenShift RPM we detected as origin-3.10.0 >> ??? ? ? ? ? ? ? ? ?on host localhost. >> ??? ? ? ? ? ? ? ? ?We will only install the latest RPMs, so please >> ensure >> ??? you are getting the release >> ??? ? ? ? ? ? ? ? ?you expect. You may need to adjust your Ansible >> ??? inventory, modify the repositories >> ??? ? ? ? ? ? ? ? ?available on the host, or run the appropriate >> OpenShift >> ??? upgrade playbook. >> >> >> What is the rpm version installed of OpenShift?origin? >> Do you perhaps have another repo that includes the OpenShift >> origin-3.10.0? > > origin is the upstream version of OpenShift, which is unsupported. > > sudo repoquery -i origin > > This will tell you which repo it came from > > You will need to disable that repo and uninstall any packages which > came from that repo > > Another mystery is why it is trying to install origin in the first > place.? openshift-ansible with > openshift_deployment_type=openshift-enterprise should not try to > install origin, it should install packages with names like > atomic-openshift-master, atomic-openshift-node, etc. > >> >> >> >> ??? On 04/04/2018 14:18, Shirly Radco wrote: >> ??? > Adding Nicolas since he hit the same issue. >> ??? > >> ??? > -- >> ??? > >> ??? > SHIRLY?RADCO >> ??? > >> ??? > BI SeNIOR SOFTWARE ENGINEER >> ??? > >> ??? > Red Hat?Israel >> ??? > >> ??? > >> ??? > TRIED. TESTED. TRUSTED. >> ??? > >> ??? > >> ??? > On Wed, Apr 4, 2018 at 3:17 PM, Shirly Radco > >> ??? > >> wrote: >> ??? > >> ??? >? ? ?Hi Peter, >> ??? > >> ??? >? ? ?The installation instructions currently support OpenShift 3.6. >> ??? > >> ??? >? ? ?I'm now working on updating them to support 3.9. >> ??? > >> ??? >? ? ?You currently have 3.10 installed. >> ??? > >> ??? >? ? ?Please install OpenShift 3.9 using this repository >> ??? > https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo >> >> ??? > ?> > >> ??? > >> ??? >? ? ?And add the following file to your vm >> ??? > >> ??? >? ? ?Run: >> ??? >? ? ?vi /root/ansible-inventory-origin-39-aio >> ??? > >> ??? >? ? ?Add: >> ??? > >> ??? >? ? ?-------------- >> ??? >? ? ?[OSEv3:children] >> ??? >? ? ?nodes >> ??? >? ? ?masters >> ??? >? ? ?etcd >> ??? > >> ??? >? ? ?[OSEv3:vars] >> ??? >? ? ?ansible_connection=local >> ??? >? ? ?openshift_release=v3.9 >> ??? >? ? ?openshift_logging_install_logging=true >> ??? >? ? ?short_version=3.9 >> ??? >? ? ?openshift_deployment_type=origin >> ??? > ?openshift_master_identity_providers=[{'mappingMethod': 'lookup', >> ??? >? ? ?'challenge': 'true', 'login': 'true', 'kind': >> ??? >? ? ?'AllowAllPasswordIdentityProvider', 'name': 'allow_all'}] >> ??? >? ? ?# bug - doesn't use correct tag >> ??? >? ? ?openshift_logging_image_version=v3.9 >> ??? > ?openshift_logging_elasticsearch_proxy_image_version=v1.0.0 >> ??? > >> ??? >? ? ?openshift_logging_es_allow_external=True >> ??? >? ? ?openshift_logging_use_mux=True >> ??? >? ? ?openshift_logging_mux_allow_external=True >> ??? > ?openshift_logging_mux_file_buffer_storage_type=hostmount >> ??? > ?openshift_logging_elasticsearch_storage_type=hostmount >> ??? > >> ?openshift_logging_elasticsearch_hostmount_path=/var/lib/elasticsearch >> ??? > >> ??? >? ? ?[nodes] >> ??? >? ? ?localhost storage=True openshift_node_labels="{'region': >> ??? 'infra'}" >> ??? >? ? ?openshift_schedulable=True >> ??? > >> ??? >? ? ?[masters] >> ??? >? ? ?localhost storage=True openshift_node_labels="{'region': >> ??? 'infra'}" >> ??? >? ? ?openshift_schedulable=True >> ??? > >> ??? >? ? ?[etcd] >> ??? >? ? ?localhost storage=True openshift_node_labels="{'region': >> ??? 'infra'}" >> ??? >? ? ?openshift_schedulable=True >> ??? > >> ??? > >> ??? >? ? ?------------ >> ??? > >> ??? >? ? ?Save and exit. >> ??? > >> ??? > >> ??? >? ? ?***Please make sure that you use /var as your Elasticsearch >> ??? >? ? ?persistent storage directory. >> ??? > >> ??? >? ? ?And when you run the OpenShift ansible >> ??? > >> ?(https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible >> >> ??? > >> ?> >) >> ??? >? ? ?use the file you just created like this: >> ??? > >> ??? >? ? ?# cd /usr/share/ansible/openshift-ansible >> ??? >? ? ?# (or wherever you cloned the git repo if using git) >> ??? >? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e >> ??? >? ? ?@/root/vars.yaml -i /root/*ansible-inventory-origin-39-aio* >> ??? >? ? ?playbooks/byo/config.yml >> ??? > >> ??? >? ? ?Best regards, >> ??? > >> ??? >? ? ?-- >> ??? > >> ??? >? ? ?SHIRLY?RADCO >> ??? > >> ??? >? ? ?BI SeNIOR SOFTWARE ENGINEER >> ??? > >> ??? >? ? ?Red Hat?Israel >> ??? > >> ??? >? ? ? >> ??? >? ? ?TRIED. TESTED. TRUSTED. >> ??? > >> ??? > >> ??? >? ? ?On Wed, Apr 4, 2018 at 12:17 PM, Peter Hudec > >> ??? >? ? ?>> wrote: >> ??? > >> ??? >? ? ? ? ?Tried to install ovirt metrics, but got error >> ??? > >> ??? >? ? ? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e >> ??? >? ? ? ? ?@/root/vars.yaml -i /root/ansible-inventory-origin-37-aio >> ??? >? ? ? ? ?playbooks/byo/config.yml >> ??? > >> ??? >? ? ? ? ?? 1. Hosts:? ? localhost >> ??? >? ? ? ? ?? ? ?Play:? ? ?Determine openshift_version to configure >> ??? on first >> ??? >? ? ? ? ?master >> ??? >? ? ? ? ?? ? ?Task:? ? ?For an RPM install, abort when the release >> ??? >? ? ? ? ?requested does >> ??? >? ? ? ? ?not match the available version. >> ??? >? ? ? ? ?? ? ?Message:? You requested openshift_release 3.7, >> ??? which is not >> ??? >? ? ? ? ?matched by >> ??? >? ? ? ? ?? ? ? ? ? ? ? ?the latest OpenShift RPM we detected as >> ??? origin-3.10.0 >> ??? >? ? ? ? ?? ? ? ? ? ? ? ?on host localhost. >> ??? >? ? ? ? ?? ? ? ? ? ? ? ?We will only install the latest RPMs, so >> ??? please >> ??? >? ? ? ? ?ensure >> ??? >? ? ? ? ?you are getting the release >> ??? >? ? ? ? ?? ? ? ? ? ? ? ?you expect. You may need to adjust your >> ??? Ansible >> ??? >? ? ? ? ?inventory, modify the repositories >> ??? >? ? ? ? ?? ? ? ? ? ? ? ?available on the host, or run the >> appropriate >> ??? >? ? ? ? ?OpenShift >> ??? >? ? ? ? ?upgrade playbook. >> ??? > >> ??? >? ? ? ? ?? ? ? ? regards >> ??? >? ? ? ? ?? ? ? ? ? ? ? ? Peter >> ??? > >> ??? > >> ??? >? ? ? ? ?On 04/04/2018 09:13, Fred Rolland wrote: >> ??? >? ? ? ? ?> Hi, >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> Check these links: >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> >> ??? https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ >> >> ??? > >> ?> > >> ??? >? ? ? ? ?> >> https://ovirt.org/develop/release-management/features/metrics/metrics-store/ >> >> ??? > >> ?> > >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> Regards, >> ??? >? ? ? ? ?> Fred >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> On Tue, Apr 3, 2018 at 9:38 AM, Anantha Raghava >> ??? >? ? ? ? ?> > ??? >> ??? >? ? ? ? ?> ??? > >> ??? >? ? ? ? ?> ??? >> ??? >? ? ? ? ?> ??? >>> >> ??? >? ? ? ? ?> wrote: >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?>? ? ?Hi, >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?>? ? ?I see that oVirt DWH is installed with Version >> ??? 4.2.x. Now, how do I >> ??? >? ? ? ? ?>? ? ?take the reports? I version 3.5, we had Jasper >> ??? reports module using >> ??? >? ? ? ? ?>? ? ?which we could take utilization reports. Can we do >> ??? something similar >> ??? >? ? ? ? ?>? ? ?here? >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?>? ? ?-- >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?>? ? ?Thanks & Regards, >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?>? ? ?Anantha Raghava >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?>? ? ?Do not print this e-mail unless required. Save >> ??? Paper & trees. >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> ?_______________________________________________ >> ??? >? ? ? ? ?>? ? ?Users mailing list >> ??? >? ? ? ? ?> Users at ovirt.org >> ??? > >> ??? >? ? ? ? ? >> ??? >> >> ??? >? ? ? ? ?> http://lists.ovirt.org/mailman/listinfo/users >> ??? >> ??? > ?> ??? > >> ??? >? ? ? ? ?> ?> ??? >> ??? > ?> >> >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> _______________________________________________ >> ??? >? ? ? ? ?> Users mailing list >> ??? >? ? ? ? ?> Users at ovirt.org >> ??? > >> ??? >? ? ? ? ?> http://lists.ovirt.org/mailman/listinfo/users >> ??? >> ??? > ?> ??? > >> ??? >? ? ? ? ?> >> ??? > >> ??? > >> ??? >? ? ? ? ?-- >> ??? >? ? ? ? ?*Peter Hudec* >> ??? >? ? ? ? ?Infra?trukt?rny architekt >> ??? > phudec at cnc.sk > ??? > >> ??? >?????? ?>> >> ??? > >> ??? >? ? ? ? ?*CNC,?a.s.* >> ??? >? ? ? ? ?Borsk? 6,?841 04 Bratislava >> ??? >? ? ? ? ?Recepcia:?+421 2? 35 000 100 >> ??? > >> ??? >? ? ? ? ?Mobil:+421?905 997 203 >> ??? >? ? ? ? ?*www.cnc.sk * >> ??? >> ??? >? ? ? ? ?> >> ??? > >> ??? >?????? ?_______________________________________________ >> ??? >? ? ? ? ?Users mailing list >> ??? > Users at ovirt.org > ??? > >> ??? > http://lists.ovirt.org/mailman/listinfo/users >> ??? >> ??? > ?> ??? > >> ??? > >> ??? > >> ??? > >> >> >> ??? -- >> ??? *Peter Hudec* >> ??? Infra?trukt?rny architekt >> ??? phudec at cnc.sk > ??? > >> >> ??? *CNC,?a.s.* >> ??? Borsk? 6,?841 04 Bratislava >> ??? Recepcia:?+421 2? 35 000 100 >> >> ??? Mobil:+421?905 997 203 >> ??? *www.cnc.sk * > ??? > >> >> > From pbrilla at redhat.com Wed Apr 4 14:48:56 2018 From: pbrilla at redhat.com (Pavol Brilla) Date: Wed, 4 Apr 2018 16:48:56 +0200 Subject: [ovirt-users] Install oVirt node without Internet repository In-Reply-To: References: Message-ID: Ovirt-node idea is that all you need to create host for oVirt is already installated from iso on system. So yes node has repositories, but you dont need them to add host to engine Just add ovirt-node as host to engine, all needed packages should be already ready on node. On Tue, Apr 3, 2018 at 8:29 PM, G, Maghesh Kumar (Nokia - IN/Bangalore) < magheshkumar.g at nokia.com> wrote: > Hi, > > > > As guided I have installed ovirt-node using 1 ISO image. But still we have > same issue. > > Please find attached log for your debugging. > > > > Also would like to tell SSH from ovirt engine node to ovirt node is > working fine. > > > > *From:Ovirt Engine Server* > > > > [root at ovrit-mgmt host-deploy]# > > [root at ovrit-mgmt host-deploy]# ssh 192.175.2.234 > > root at 192.175.2.234's password: > > Last login: Tue Apr 3 19:11:03 2018 from ovirt-mgmt.banone.nsn-rdnet.net > > > > node status: OK > > See `nodectl check` for more information > > > > Admin Console: https://192.175.2.234:9090/ > > [root at kvm04 ~]# > > > > *From: Ovirt Node* > > [root at kvm04 log]# ssh 192.175.2.234 > > The authenticity of host '192.175.2.234 (192.175.2.234)' can't be > established. > > ECDSA key fingerprint is SHA256:rlMHEDBvLz6GK0LQh2n8blEdwYPtMG > nl8Hzw3Mo2PMQ. > > ECDSA key fingerprint is MD5:3a:69:2b:2c:87:c7:3c:55: > 3d:13:b8:b1:ac:bd:e7:6a. > > Are you sure you want to continue connecting (yes/no)? yes > > Warning: Permanently added '192.175.2.234' (ECDSA) to the list of known > hosts. > > root at 192.175.2.234's password: > > Last login: Tue Apr 3 19:25:43 2018 from ovirt-mgmt.banone.nsn-rdnet.net > > > > node status: OK > > See `nodectl check` for more information > > > > Admin Console: https://192.175.2.234:9090/ > > > > [root at kvm04 ~]# > > > > > > *Repository: Still repository is pointing to internet* > > > > [root at kvm04 ~]# cd /etc/yum.repos.d/ > > [root at kvm04 yum.repos.d]# ls -ltr > > total 40 > > -rw-r--r--. 1 root root 308 Mar 29 11:42 ovirt-4.2.repo > > -rw-r--r--. 1 root root 2571 Mar 29 11:42 ovirt-4.2-dependencies.repo > > -rw-r--r--. 1 root root 367 Mar 29 11:42 cockpit-preview-epel-7.repo > > -rw-r--r--. 1 root root 3830 Mar 29 11:42 CentOS-Vault.repo > > -rw-r--r--. 1 root root 1331 Mar 29 11:42 CentOS-Sources.repo > > -rw-r--r--. 1 root root 630 Mar 29 11:42 CentOS-Media.repo > > -rw-r--r--. 1 root root 314 Mar 29 11:42 CentOS-fasttrack.repo > > -rw-r--r--. 1 root root 1309 Mar 29 11:42 CentOS-CR.repo > > -rw-r--r--. 1 root root 649 Mar 29 11:42 CentOS-Debuginfo.repo > > -rw-r--r--. 1 root root 1694 Mar 29 11:42 CentOS-Base.repo > > [root at kvm04 yum.repos.d]# > > > > > > Regards, > > Maghesh > > > > *From:* Pavol Brilla [mailto:pbrilla at redhat.com] > *Sent:* Tuesday, April 03, 2018 12:32 PM > *To:* G, Maghesh Kumar (Nokia - IN/Bangalore) > *Cc:* users at ovirt.org; infra at ovirt.org > *Subject:* Re: [ovirt-users] Install oVirt node without Internet > repository > > > > Ovirt-node should provide all you need as host on 1 ISO: > > > > https://www.ovirt.org/node/ > > > > On Mon, Apr 2, 2018 at 12:31 PM, G, Maghesh Kumar (Nokia - IN/Bangalore) < > magheshkumar.g at nokia.com> wrote: > > Hi > > > > Description of problem: > > Cannot add host - install fails & Install oVirt node without Internet repository > > > > Version: Ovirt-4.2 > > Host is installed with RHEL 7.4 > > > > Actual results: > > Host KVM02 installation failed. Command returned failure code 1 during SSH session 'root at 192.175.2.231' > > > > I found that right now on my oVirt Nodes in my test environment *does not > NOT connect to the internet.*.. > > Basically, i need the offline repository to access from oVirt nodes > without Internet access. > > > > Please guide us how to proceed > > > > Regards, > > Maghesh > > > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > > > > -- > > *PAVOL BRILLA* > > RHV QUALITY ENGINEER, CLOUD > > Red Hat Czech Republic, Brno > > > > *TRIED. TESTED. TRUSTED.* > > > -- PAVOL BRILLA RHV QUALITY ENGINEER, CLOUD Red Hat Czech Republic, Brno TRIED. TESTED. TRUSTED. -------------- next part -------------- An HTML attachment was scrubbed... URL: From dhy336 at sina.com Wed Apr 4 14:53:01 2018 From: dhy336 at sina.com (dhy336 at sina.com) Date: Wed, 04 Apr 2018 22:53:01 +0800 Subject: [ovirt-users] =?gbk?b?u9i4tKO6UmU6ICBob3N0ZWQtZW5naW5lIGRlcGxv?= =?gbk?q?y_error?= Message-ID: <20180404145301.A5963A800D1@webmail.sinamail.sina.com.cn> thanks, it is work, I change my hostname by hostnamectl.[root at hosted-engine-test1 ~]# hostnamectl set-hostname hosted-engine-test1 ----- ???? ----- ????Martin Sivak ????dhy336 ????Simone Tiraboschi , users ???Re: [ovirt-users] hosted-engine deploy error ???2018?04?04? 19?29? Hi, the hostname is invalid for hosted engine because it is set to localhost.localdomain. Check the shell prompt, do you see the localhost there? [root at localhost ~]# hosted-engine --deploy You can change the hostname by using many different tools, check https://fedoramagazine.org/set-hostname-fedora/ for examples. Most of them (if not all) should be valid for CentOS as well. The hostname you set must be resolvable to IP and that IP has to point back to the host you are on. Best regards Martin Sivak On Wed, Apr 4, 2018 at 12:50 PM, dhy336 wrote: > thanks, but i do not know why is my hostname invalid? > > > ?2018?04?04? 18:41?Simone Tiraboschi ??? > > > On Wed, Apr 4, 2018 at 12:28 PM, wrote: >> >> Hi, >> >> I deloy hosted-engine, by this >> blog,https://ovirt.org/documentation/self-hosted/chap-Deploying_Self-Hosted_Engine/ >> but I am facing some error.who may give me some advise? >> >> [root at localhost ~]# hosted-engine --deploy > > > ^^^ > > The error is here: please set a valid hostname for your host: the engine VM > should be able to reach it. > If you add the host as localhost the engine VM will reach itself and it's > not what we want. > > If you don'y have a working DNS system, hosted-engine-setup will ask about > injecting an entry for you under /etc/hosts on the engine VM but you still > need a valid hostname. > > >> >> >> >> >> --== STORAGE CONFIGURATION ==-- >> >> Please specify the storage you would like to use (glusterfs, >> iscsi, fc, nfs3, nfs4)[nfs3]: >> Please specify the full shared storage connection path to use >> (example: host:/path): 192.168.122.134:/home/exports/hosted-engine >> >> --== HOST NETWORK CONFIGURATION ==-- >> >> iptables was detected on your computer, do you wish setup to >> configure it? (Yes, No)[Yes]: >> Please indicate a pingable gateway IP address [192.168.122.1]: >> Please indicate a nic to set ovirtmgmt bridge on: (eth0) [eth0]: >> >> --== VM CONFIGURATION ==-- >> >> The following appliance have been found on your system: >> [1] - The oVirt Engine Appliance image (OVA) - >> 4.1-20180124.1.el7.centos >> [2] - Directly select an OVA file >> Please select an appliance (1, 2) [1]: >> [ INFO ] Verifying its sha1sum >> [ INFO ] Checking OVF archive content (could take a few minutes depending >> on archive size) >> [ INFO ] Checking OVF XML content (could take a few minutes depending on >> archive size) >> Please specify the console type you would like to use to connect >> to the VM (vnc, spice) [vnc]: >> [ INFO ] Detecting host timezone. >> Would you like to use cloud-init to customize the appliance on >> the first boot (Yes, No)[Yes]? >> Would you like to generate on-fly a cloud-init ISO image (of >> no-cloud type) >> or do you have an existing one (Generate, Existing)[Generate]? >> Please provide the FQDN you would like to use for the engine >> appliance. >> Note: This will be the FQDN of the engine VM you are now going >> to launch, >> it should not point to the base host or to any other existing >> machine. >> Engine VM FQDN: (leave it empty to skip): []: engine.tchyp.com >> Please provide the domain name you would like to use for the >> engine appliance. >> Engine VM domain: [tchyp.com] >> Automatically execute engine-setup on the engine appliance on >> first boot (Yes, No)[Yes]? >> Automatically restart the engine VM as a monitored service after >> engine-setup (Yes, No)[Yes]? >> Enter root password that will be used for the engine appliance >> (leave it empty to skip): >> [WARNING] Skipping appliance root password >> Enter ssh public key for the root user that will be used for the >> engine appliance (leave it empty to skip): >> [WARNING] Skipping appliance root ssh public key >> Do you want to enable ssh access for the root user (yes, no, >> without-password) [yes]: >> [WARNING] The oVirt engine appliance is not configured with a default >> password, please consider configuring it via cloud-init >> Please specify the size of the VM disk in GB: [58]: >> [WARNING] Minimum requirements not met by available memory: Required: 4096 >> MB. Available: 3064 MB >> Please specify the memory size of the VM in MB (Defaults to >> maximum available): [3064]: >> [WARNING] Minimum requirements for memory size not met >> Continue with specified memory size? (Yes, No) [No]: yes >> The following CPU types are supported by this host: >> - model_Haswell-noTSX: Intel Haswell-noTSX Family >> - model_SandyBridge: Intel SandyBridge Family >> - model_Westmere: Intel Westmere Family >> - model_Nehalem: Intel Nehalem Family >> - model_Penryn: Intel Penryn Family >> - model_Conroe: Intel Conroe Family >> Please specify the CPU type to be used by the VM >> [model_Haswell-noTSX]: >> Please specify the number of virtual CPUs for the VM (Defaults >> to appliance OVF value): [4]: >> You may specify a unicast MAC address for the VM or accept a >> randomly generated default [00:16:3e:5d:72:8a]: >> How should the engine VM network be configured (DHCP, >> Static)[DHCP]? Static >> Please enter the IP address to be used for the engine VM >> [192.168.122.2]: 192.168.122.211 >> [ INFO ] The engine VM will be configured to use 192.168.122.211/24 >> Please provide a comma-separated list (max 3) of IP addresses of >> domain name servers for the engine VM >> Engine VM DNS (leave it empty to skip) [192.168.122.1]: >> Add lines for the appliance itself and for this host to >> /etc/hosts on the engine VM? >> Note: ensuring that this host could resolve the engine VM >> hostname is still up to you >> (Yes, No)[No] >> >> --== HOSTED ENGINE CONFIGURATION ==-- >> >> Enter engine admin password: >> Confirm engine admin password: >> Please provide the name of the SMTP server through which we will >> send notifications [localhost]: >> Please provide the TCP port number of the SMTP server [25]: >> Please provide the email address from which notifications will >> be sent [root at localhost]: >> Please provide a comma-separated list of email addresses which >> will get notifications [root at localhost]: >> [ INFO ] Stage: Setup validation >> [WARNING] Cannot validate host name settings, reason: resolved host does >> not match any of the local addresses >> [ ERROR ] Host name is not valid: localhost.localdomain resolves to >> 127.0.0.1 and not all of them can be mapped to non loopback devices on this >> host >> [ ERROR ] Failed to execute stage 'Setup validation': Host name is not >> valid: localhost.localdomain resolves to 127.0.0.1 and not all of them can >> be mapped to non loopback devices on this host >> [ INFO ] Stage: Clean up >> [ INFO ] Generating answer file >> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20180404182053.conf' >> [ INFO ] Stage: Pre-termination >> [ INFO ] Stage: Termination >> [ ERROR ] Hosted Engine deployment failed >> Log file is located at >> /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20180404181811-aq5ord.log >> >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From magheshkumar.g at nokia.com Wed Apr 4 15:02:14 2018 From: magheshkumar.g at nokia.com (G, Maghesh Kumar (Nokia - IN/Bangalore)) Date: Wed, 4 Apr 2018 15:02:14 +0000 Subject: [ovirt-users] Install oVirt node without Internet repository In-Reply-To: References: Message-ID: Hi Team, I have installed Ovirt-Node using the ISO. Still I?m not able to add host to engine. Attached log for your reference!. [cid:image001.png at 01D3CC53.FA11AA90] Regards, Maghesh From: Pavol Brilla [mailto:pbrilla at redhat.com] Sent: Wednesday, April 04, 2018 8:19 PM To: G, Maghesh Kumar (Nokia - IN/Bangalore) Cc: users at ovirt.org; infra at ovirt.org Subject: Re: [ovirt-users] Install oVirt node without Internet repository Ovirt-node idea is that all you need to create host for oVirt is already installated from iso on system. So yes node has repositories, but you dont need them to add host to engine Just add ovirt-node as host to engine, all needed packages should be already ready on node. On Tue, Apr 3, 2018 at 8:29 PM, G, Maghesh Kumar (Nokia - IN/Bangalore) > wrote: Hi, As guided I have installed ovirt-node using 1 ISO image. But still we have same issue. Please find attached log for your debugging. Also would like to tell SSH from ovirt engine node to ovirt node is working fine. From:Ovirt Engine Server [root at ovrit-mgmt host-deploy]# [root at ovrit-mgmt host-deploy]# ssh 192.175.2.234 root at 192.175.2.234's password: Last login: Tue Apr 3 19:11:03 2018 from ovirt-mgmt.banone.nsn-rdnet.net node status: OK See `nodectl check` for more information Admin Console: https://192.175.2.234:9090/ [root at kvm04 ~]# From: Ovirt Node [root at kvm04 log]# ssh 192.175.2.234 The authenticity of host '192.175.2.234 (192.175.2.234)' can't be established. ECDSA key fingerprint is SHA256:rlMHEDBvLz6GK0LQh2n8blEdwYPtMGnl8Hzw3Mo2PMQ. ECDSA key fingerprint is MD5:3a:69:2b:2c:87:c7:3c:55:3d:13:b8:b1:ac:bd:e7:6a. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '192.175.2.234' (ECDSA) to the list of known hosts. root at 192.175.2.234's password: Last login: Tue Apr 3 19:25:43 2018 from ovirt-mgmt.banone.nsn-rdnet.net node status: OK See `nodectl check` for more information Admin Console: https://192.175.2.234:9090/ [root at kvm04 ~]# Repository: Still repository is pointing to internet [root at kvm04 ~]# cd /etc/yum.repos.d/ [root at kvm04 yum.repos.d]# ls -ltr total 40 -rw-r--r--. 1 root root 308 Mar 29 11:42 ovirt-4.2.repo -rw-r--r--. 1 root root 2571 Mar 29 11:42 ovirt-4.2-dependencies.repo -rw-r--r--. 1 root root 367 Mar 29 11:42 cockpit-preview-epel-7.repo -rw-r--r--. 1 root root 3830 Mar 29 11:42 CentOS-Vault.repo -rw-r--r--. 1 root root 1331 Mar 29 11:42 CentOS-Sources.repo -rw-r--r--. 1 root root 630 Mar 29 11:42 CentOS-Media.repo -rw-r--r--. 1 root root 314 Mar 29 11:42 CentOS-fasttrack.repo -rw-r--r--. 1 root root 1309 Mar 29 11:42 CentOS-CR.repo -rw-r--r--. 1 root root 649 Mar 29 11:42 CentOS-Debuginfo.repo -rw-r--r--. 1 root root 1694 Mar 29 11:42 CentOS-Base.repo [root at kvm04 yum.repos.d]# Regards, Maghesh From: Pavol Brilla [mailto:pbrilla at redhat.com] Sent: Tuesday, April 03, 2018 12:32 PM To: G, Maghesh Kumar (Nokia - IN/Bangalore) > Cc: users at ovirt.org; infra at ovirt.org Subject: Re: [ovirt-users] Install oVirt node without Internet repository Ovirt-node should provide all you need as host on 1 ISO: https://www.ovirt.org/node/ On Mon, Apr 2, 2018 at 12:31 PM, G, Maghesh Kumar (Nokia - IN/Bangalore) > wrote: Hi Description of problem: Cannot add host - install fails & Install oVirt node without Internet repository Version: Ovirt-4.2 Host is installed with RHEL 7.4 Actual results: Host KVM02 installation failed. Command returned failure code 1 during SSH session 'root at 192.175.2.231' I found that right now on my oVirt Nodes in my test environment does not NOT connect to the internet... Basically, i need the offline repository to access from oVirt nodes without Internet access. Please guide us how to proceed Regards, Maghesh _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- PAVOL BRILLA RHV QUALITY ENGINEER, CLOUD Red Hat Czech Republic, Brno [https://www.redhat.com/files/brand/email/sig-redhat.png] TRIED. TESTED. TRUSTED. -- PAVOL BRILLA RHV QUALITY ENGINEER, CLOUD Red Hat Czech Republic, Brno [https://www.redhat.com/files/brand/email/sig-redhat.png] TRIED. TESTED. TRUSTED. -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.png Type: image/png Size: 57274 bytes Desc: image001.png URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: ovirt-host-deploy-20180404202742-192.175.2.234-7c6a6a20.log Type: application/octet-stream Size: 189828 bytes Desc: ovirt-host-deploy-20180404202742-192.175.2.234-7c6a6a20.log URL: From phudec at cnc.sk Wed Apr 4 15:41:15 2018 From: phudec at cnc.sk (Peter Hudec) Date: Wed, 4 Apr 2018 17:41:15 +0200 Subject: [ovirt-users] Engine reports In-Reply-To: <855bb1c1-33c7-d6ec-f513-5702bc2f736c@redhat.com> References: <855bb1c1-33c7-d6ec-f513-5702bc2f736c@redhat.com> Message-ID: <1a415534-05af-1dc1-9743-de5d15a79cb7@cnc.sk> [PROD] root at dipostat01.cnc.sk: /usr/share/ansible/openshift-ansible # repoquery -i origin Repository centos-openshift-origin is listed more than once in the configuration Name : origin Version : 3.7.2 Release : 1.el7.git.0.f0186dd Architecture: x86_64 Size : 957727742 Packager : CBS Group : Unspecified URL : https://github.com/openshift/origin Repository : centos-openshift-origin37-candidate Summary : Open Source Container Management by Red Hat Source : origin-3.7.2-1.el7.git.0.f0186dd.src.rpm Description : OpenShift is a distribution of Kubernetes optimized for enterprise application development and deployment. OpenShift adds developer and operational centric tools on top of Kubernetes to enable rapid application development, easy deployment and scaling, and long-term lifecycle maintenance for small and large teams and applications. It provides a secure and multi-tenant configuration for Kubernetes allowing you to safely host many different applications and workloads on a unified cluster. On 04/04/2018 16:26, Rich Megginson wrote: > sudo repoquery -i origin -- *Peter Hudec* Infra?trukt?rny architekt phudec at cnc.sk *CNC,?a.s.* Borsk? 6,?841 04 Bratislava Recepcia:?+421 2? 35 000 100 Mobil:+421?905 997 203 *www.cnc.sk* From sradco at redhat.com Wed Apr 4 15:41:23 2018 From: sradco at redhat.com (Shirly Radco) Date: Wed, 4 Apr 2018 18:41:23 +0300 Subject: [ovirt-users] Engine reports In-Reply-To: References: <855bb1c1-33c7-d6ec-f513-5702bc2f736c@redhat.com> Message-ID: Hi, I have a updated the installation instructions for installing OpenShift 3.9, based on Rich's work , for the oVirt use case. Please make sure where you get the 3.10 rpm and disable that repo. This is the PR that includes the metrics store installation of OpenShift 3.9 https://github.com/sradco/ovirt-site/blob/74f1e772c8ca75d4b9e57a3c02cce49c5030f7f7/source/develop/release-management/features/metrics/setting-up-viaq-logging.html.md It should be merged soon, but you can use it to install. Please make sure to add the ansible-inventory-origin-39-aio file as described below. These are required parameters for the ansible playbook. Best regards, -- SHIRLY RADCO BI SeNIOR SOFTWARE ENGINEER Red Hat Israel TRIED. TESTED. TRUSTED. On Wed, Apr 4, 2018 at 5:41 PM, Rich Megginson wrote: > I'm sorry. I misunderstood the request. > > We are in the process of updating the instructions for installing viaq > logging based on upstream origin 3.9 - https://github.com/ViaQ/Main/p > ull/37 > > In the meantime, you can follow along on that PR, and we will have > instructions very soon. > > > On 04/04/2018 08:26 AM, Rich Megginson wrote: > >> On 04/04/2018 08:22 AM, Shirly Radco wrote: >> >>> >>> >>> -- >>> >>> SHIRLY RADCO >>> >>> BI SeNIOR SOFTWARE ENGINEER >>> >>> Red Hat Israel >>> >>> >>> TRIED. TESTED. TRUSTED. >>> >>> >>> On Wed, Apr 4, 2018 at 5:07 PM, Peter Hudec >> phudec at cnc.sk>> wrote: >>> >>> almost the same issue, the versio for openshoft release changed to >>> 3.9 >>> >>> Failure summary: >>> >>> >>> 1. Hosts: localhost >>> Play: Determine openshift_version to configure on first >>> master >>> Task: For an RPM install, abort when the release >>> requested does >>> not match the available version. >>> Message: You requested openshift_release 3.9, which is not >>> matched by >>> the latest OpenShift RPM we detected as origin-3.10.0 >>> on host localhost. >>> We will only install the latest RPMs, so please ensure >>> you are getting the release >>> you expect. You may need to adjust your Ansible >>> inventory, modify the repositories >>> available on the host, or run the appropriate >>> OpenShift >>> upgrade playbook. >>> >>> >>> What is the rpm version installed of OpenShift origin? >>> Do you perhaps have another repo that includes the OpenShift >>> origin-3.10.0? >>> >> >> origin is the upstream version of OpenShift, which is unsupported. >> >> sudo repoquery -i origin >> >> This will tell you which repo it came from >> >> You will need to disable that repo and uninstall any packages which came >> from that repo >> >> Another mystery is why it is trying to install origin in the first >> place. openshift-ansible with openshift_deployment_type=openshift-enterprise >> should not try to install origin, it should install packages with names >> like atomic-openshift-master, atomic-openshift-node, etc. >> >> >>> >>> >>> On 04/04/2018 14:18, Shirly Radco wrote: >>> > Adding Nicolas since he hit the same issue. >>> > >>> > -- >>> > >>> > SHIRLY RADCO >>> > >>> > BI SeNIOR SOFTWARE ENGINEER >>> > >>> > Red Hat Israel >>> > >>> > >>> > TRIED. TESTED. TRUSTED. >>> > >>> > >>> > On Wed, Apr 4, 2018 at 3:17 PM, Shirly Radco >> >>> > >> wrote: >>> > >>> > Hi Peter, >>> > >>> > The installation instructions currently support OpenShift 3.6. >>> > >>> > I'm now working on updating them to support 3.9. >>> > >>> > You currently have 3.10 installed. >>> > >>> > Please install OpenShift 3.9 using this repository >>> > https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo >>> >>> > >> > >>> > >>> > And add the following file to your vm >>> > >>> > Run: >>> > vi /root/ansible-inventory-origin-39-aio >>> > >>> > Add: >>> > >>> > -------------- >>> > [OSEv3:children] >>> > nodes >>> > masters >>> > etcd >>> > >>> > [OSEv3:vars] >>> > ansible_connection=local >>> > openshift_release=v3.9 >>> > openshift_logging_install_logging=true >>> > short_version=3.9 >>> > openshift_deployment_type=origin >>> > openshift_master_identity_providers=[{'mappingMethod': 'lookup', >>> > 'challenge': 'true', 'login': 'true', 'kind': >>> > 'AllowAllPasswordIdentityProvider', 'name': 'allow_all'}] >>> > # bug - doesn't use correct tag >>> > openshift_logging_image_version=v3.9 >>> > openshift_logging_elasticsearch_proxy_image_version=v1.0.0 >>> > >>> > openshift_logging_es_allow_external=True >>> > openshift_logging_use_mux=True >>> > openshift_logging_mux_allow_external=True >>> > openshift_logging_mux_file_buffer_storage_type=hostmount >>> > openshift_logging_elasticsearch_storage_type=hostmount >>> > >>> openshift_logging_elasticsearch_hostmount_path=/var/lib/elasticsearch >>> > >>> > [nodes] >>> > localhost storage=True openshift_node_labels="{'region': >>> 'infra'}" >>> > openshift_schedulable=True >>> > >>> > [masters] >>> > localhost storage=True openshift_node_labels="{'region': >>> 'infra'}" >>> > openshift_schedulable=True >>> > >>> > [etcd] >>> > localhost storage=True openshift_node_labels="{'region': >>> 'infra'}" >>> > openshift_schedulable=True >>> > >>> > >>> > ------------ >>> > >>> > Save and exit. >>> > >>> > >>> > ***Please make sure that you use /var as your Elasticsearch >>> > persistent storage directory. >>> > >>> > And when you run the OpenShift ansible >>> > >>> (https://www.ovirt.org/develop/release-management/features/ >>> metrics/setting-up-viaq-logging/#running-ansible >>> >> metrics/setting-up-viaq-logging/#running-ansible> >>> > >>> >> metrics/setting-up-viaq-logging/#running-ansible >>> >> metrics/setting-up-viaq-logging/#running-ansible>>) >>> > use the file you just created like this: >>> > >>> > # cd /usr/share/ansible/openshift-ansible >>> > # (or wherever you cloned the git repo if using git) >>> > ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e >>> > @/root/vars.yaml -i /root/*ansible-inventory-origin-39-aio* >>> > playbooks/byo/config.yml >>> > >>> > Best regards, >>> > >>> > -- >>> > >>> > SHIRLY RADCO >>> > >>> > BI SeNIOR SOFTWARE ENGINEER >>> > >>> > Red Hat Israel >>> > >>> > >>> > TRIED. TESTED. TRUSTED. >>> > >>> > >>> > On Wed, Apr 4, 2018 at 12:17 PM, Peter Hudec >> >>> > >> wrote: >>> > >>> > Tried to install ovirt metrics, but got error >>> > >>> > ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e >>> > @/root/vars.yaml -i /root/ansible-inventory-origin-37-aio >>> > playbooks/byo/config.yml >>> > >>> > 1. Hosts: localhost >>> > Play: Determine openshift_version to configure >>> on first >>> > master >>> > Task: For an RPM install, abort when the release >>> > requested does >>> > not match the available version. >>> > Message: You requested openshift_release 3.7, >>> which is not >>> > matched by >>> > the latest OpenShift RPM we detected as >>> origin-3.10.0 >>> > on host localhost. >>> > We will only install the latest RPMs, so >>> please >>> > ensure >>> > you are getting the release >>> > you expect. You may need to adjust your >>> Ansible >>> > inventory, modify the repositories >>> > available on the host, or run the >>> appropriate >>> > OpenShift >>> > upgrade playbook. >>> > >>> > regards >>> > Peter >>> > >>> > >>> > On 04/04/2018 09:13, Fred Rolland wrote: >>> > > Hi, >>> > > >>> > > Check these links: >>> > > >>> > > >>> https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ >>> >>> > >>> >> > >>> > > >>> https://ovirt.org/develop/release-management/features/metric >>> s/metrics-store/ >>> >> cs/metrics-store/> >>> > >> ics/metrics-store/ >>> >> cs/metrics-store/>> >>> > > >>> > > Regards, >>> > > Fred >>> > > >>> > > On Tue, Apr 3, 2018 at 9:38 AM, Anantha Raghava >>> > > >> >>> > >> > >>> > >> >>> > >> >>> >>> > > wrote: >>> > > >>> > > Hi, >>> > > >>> > > I see that oVirt DWH is installed with Version >>> 4.2.x. Now, how do I >>> > > take the reports? I version 3.5, we had Jasper >>> reports module using >>> > > which we could take utilization reports. Can we do >>> something similar >>> > > here? >>> > > >>> > > -- >>> > > >>> > > Thanks & Regards, >>> > > >>> > > >>> > > Anantha Raghava >>> > > >>> > > >>> > > Do not print this e-mail unless required. Save >>> Paper & trees. >>> > > >>> > > >>> > > _______________________________________________ >>> > > Users mailing list >>> > > Users at ovirt.org >>> > >>> > >>> >> >>> > > http://lists.ovirt.org/mailman/listinfo/users >>> >>> > >> > >>> > > >> >>> > >> >> >>> > > >>> > > >>> > > >>> > > >>> > > _______________________________________________ >>> > > Users mailing list >>> > > Users at ovirt.org >>> > >>> > > http://lists.ovirt.org/mailman/listinfo/users >>> >>> > >> > >>> > > >>> > >>> > >>> > -- >>> > *Peter Hudec* >>> > Infra?trukt?rny architekt >>> > phudec at cnc.sk >> > >>> > >> >>> > >>> > *CNC, a.s.* >>> > Borsk? 6, 841 04 Bratislava >>> > Recepcia: +421 2 35 000 100 >>> > >>> > Mobil:+421 905 997 203 >>> > *www.cnc.sk * >>> >>> > > >>> > >>> > _______________________________________________ >>> > Users mailing list >>> > Users at ovirt.org >> > >>> > http://lists.ovirt.org/mailman/listinfo/users >>> >>> > >> > >>> > >>> > >>> > >>> >>> >>> -- >>> *Peter Hudec* >>> Infra?trukt?rny architekt >>> phudec at cnc.sk >> > >>> >>> *CNC, a.s.* >>> Borsk? 6, 841 04 Bratislava >>> Recepcia: +421 2 35 000 100 >>> >>> Mobil:+421 905 997 203 >>> *www.cnc.sk * >> > >>> >>> >>> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From cganglin1 at comcast.net Wed Apr 4 16:58:51 2018 From: cganglin1 at comcast.net (Canglin) Date: Wed, 4 Apr 2018 10:58:51 -0600 Subject: [ovirt-users] How to subscribe to Content Delivery Network in oVirt 4.2.2 Cockpit Message-ID: <0975895d-1449-294a-d712-e898c5214d52@comcast.net> In the documentation - chapter 6 "Installing oVirt Node" version 4.2.2. Step 13. Once the installation is complete, log in to the Cockpit user interface at https:///HostFQDNorIP/:9090 to subscribe the host to the Content Delivery Network. Click *Tools* > *Subscriptions* > *Register System* and enter your Customer Portal username and password. The system automatically subscribes to the *oVirt Node* entitlement. I am having a hard time finding this in the cockpit.? Any assistance in explaining the benefit of this step and where to find would be appreciated.? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: From magheshkumar.g at nokia.com Wed Apr 4 18:33:42 2018 From: magheshkumar.g at nokia.com (G, Maghesh Kumar (Nokia - IN/Bangalore)) Date: Wed, 4 Apr 2018 18:33:42 +0000 Subject: [ovirt-users] Install oVirt node without Internet repository In-Reply-To: References: Message-ID: FYI. Updated logs attached. [cid:image002.png at 01D3CC71.886D1FA0] From: G, Maghesh Kumar (Nokia - IN/Bangalore) Sent: Wednesday, April 04, 2018 8:32 PM To: 'Pavol Brilla' Cc: users at ovirt.org; infra at ovirt.org Subject: RE: [ovirt-users] Install oVirt node without Internet repository Hi Team, I have installed Ovirt-Node using the ISO. Still I?m not able to add host to engine. Attached log for your reference!. [cid:image003.png at 01D3CC71.886D1FA0] Regards, Maghesh From: Pavol Brilla [mailto:pbrilla at redhat.com] Sent: Wednesday, April 04, 2018 8:19 PM To: G, Maghesh Kumar (Nokia - IN/Bangalore) > Cc: users at ovirt.org; infra at ovirt.org Subject: Re: [ovirt-users] Install oVirt node without Internet repository Ovirt-node idea is that all you need to create host for oVirt is already installated from iso on system. So yes node has repositories, but you dont need them to add host to engine Just add ovirt-node as host to engine, all needed packages should be already ready on node. On Tue, Apr 3, 2018 at 8:29 PM, G, Maghesh Kumar (Nokia - IN/Bangalore) > wrote: Hi, As guided I have installed ovirt-node using 1 ISO image. But still we have same issue. Please find attached log for your debugging. Also would like to tell SSH from ovirt engine node to ovirt node is working fine. From:Ovirt Engine Server [root at ovrit-mgmt host-deploy]# [root at ovrit-mgmt host-deploy]# ssh 192.175.2.234 root at 192.175.2.234's password: Last login: Tue Apr 3 19:11:03 2018 from ovirt-mgmt.banone.nsn-rdnet.net node status: OK See `nodectl check` for more information Admin Console: https://192.175.2.234:9090/ [root at kvm04 ~]# From: Ovirt Node [root at kvm04 log]# ssh 192.175.2.234 The authenticity of host '192.175.2.234 (192.175.2.234)' can't be established. ECDSA key fingerprint is SHA256:rlMHEDBvLz6GK0LQh2n8blEdwYPtMGnl8Hzw3Mo2PMQ. ECDSA key fingerprint is MD5:3a:69:2b:2c:87:c7:3c:55:3d:13:b8:b1:ac:bd:e7:6a. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '192.175.2.234' (ECDSA) to the list of known hosts. root at 192.175.2.234's password: Last login: Tue Apr 3 19:25:43 2018 from ovirt-mgmt.banone.nsn-rdnet.net node status: OK See `nodectl check` for more information Admin Console: https://192.175.2.234:9090/ [root at kvm04 ~]# Repository: Still repository is pointing to internet [root at kvm04 ~]# cd /etc/yum.repos.d/ [root at kvm04 yum.repos.d]# ls -ltr total 40 -rw-r--r--. 1 root root 308 Mar 29 11:42 ovirt-4.2.repo -rw-r--r--. 1 root root 2571 Mar 29 11:42 ovirt-4.2-dependencies.repo -rw-r--r--. 1 root root 367 Mar 29 11:42 cockpit-preview-epel-7.repo -rw-r--r--. 1 root root 3830 Mar 29 11:42 CentOS-Vault.repo -rw-r--r--. 1 root root 1331 Mar 29 11:42 CentOS-Sources.repo -rw-r--r--. 1 root root 630 Mar 29 11:42 CentOS-Media.repo -rw-r--r--. 1 root root 314 Mar 29 11:42 CentOS-fasttrack.repo -rw-r--r--. 1 root root 1309 Mar 29 11:42 CentOS-CR.repo -rw-r--r--. 1 root root 649 Mar 29 11:42 CentOS-Debuginfo.repo -rw-r--r--. 1 root root 1694 Mar 29 11:42 CentOS-Base.repo [root at kvm04 yum.repos.d]# Regards, Maghesh From: Pavol Brilla [mailto:pbrilla at redhat.com] Sent: Tuesday, April 03, 2018 12:32 PM To: G, Maghesh Kumar (Nokia - IN/Bangalore) > Cc: users at ovirt.org; infra at ovirt.org Subject: Re: [ovirt-users] Install oVirt node without Internet repository Ovirt-node should provide all you need as host on 1 ISO: https://www.ovirt.org/node/ On Mon, Apr 2, 2018 at 12:31 PM, G, Maghesh Kumar (Nokia - IN/Bangalore) > wrote: Hi Description of problem: Cannot add host - install fails & Install oVirt node without Internet repository Version: Ovirt-4.2 Host is installed with RHEL 7.4 Actual results: Host KVM02 installation failed. Command returned failure code 1 during SSH session 'root at 192.175.2.231' I found that right now on my oVirt Nodes in my test environment does not NOT connect to the internet... Basically, i need the offline repository to access from oVirt nodes without Internet access. Please guide us how to proceed Regards, Maghesh _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- PAVOL BRILLA RHV QUALITY ENGINEER, CLOUD Red Hat Czech Republic, Brno [https://www.redhat.com/files/brand/email/sig-redhat.png] TRIED. TESTED. TRUSTED. -- PAVOL BRILLA RHV QUALITY ENGINEER, CLOUD Red Hat Czech Republic, Brno [https://www.redhat.com/files/brand/email/sig-redhat.png] TRIED. TESTED. TRUSTED. -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.png Type: image/png Size: 188829 bytes Desc: image002.png URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image003.png Type: image/png Size: 57274 bytes Desc: image003.png URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: ovirt-host-deploy-20180404235916-192.175.2.234-eec26c53-dfca-44ae-aa17-b2e87a53e833.log Type: application/octet-stream Size: 153029 bytes Desc: ovirt-host-deploy-20180404235916-192.175.2.234-eec26c53-dfca-44ae-aa17-b2e87a53e833.log URL: From vincent at epicenergy.ca Wed Apr 4 19:20:10 2018 From: vincent at epicenergy.ca (Vincent Royer) Date: Wed, 4 Apr 2018 12:20:10 -0700 Subject: [ovirt-users] Cannot update Node 4.2 to 4.2.2 Message-ID: Trying to update my nodes to 4.2.2, having a hard time. I updated the engine, no problems. Migrated VMs off host 1 and put it into maintenance. I do a "check upgrade" in the GUI, it finds an update, but fails to install. Drop to CLI and try to do it manually yum update -y I get lots of dependency errors for missing packages. A quick google shows that I may have the incorrect RPMs installed, and should only have the ovirt-node-ng-image and appliance rpms. So I try to install only those. So I think I have the right rpms now But now when I do a yum update it says there are no packages marked for update. How to fix this? Is there anything I have done wrong that I shouldn't do on my other hosts? -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 8926 bytes Desc: not available URL: From rightkicktech at gmail.com Thu Apr 5 05:56:28 2018 From: rightkicktech at gmail.com (Alex K) Date: Thu, 05 Apr 2018 05:56:28 +0000 Subject: [ovirt-users] Hardware critique In-Reply-To: References: Message-ID: Hi, You should be ok with the setup. I am running around 20 vms (linux and windows, small and medium size) with the half of your specs. With 10G network replica 3 is ok. Alex On Wed, Apr 4, 2018, 16:13 Jayme wrote: > I'm spec'ing hardware for a 3-node oVirt build (on somewhat of a budget). > I plan to do 20-30 Linux VMs most of them very light weight + a couple of > heavier hitting web and DB servers with frequent rsync backups. Some have > a lot of small files from large github repos etc. > > 3X of the following: > > Dell PowerEdge R720 > 2x 2.9 GHz 8 Core E5-2690 (SR0L0) > 256GB RAM > PERC H710 > 2x10GB Nic > > Boot/OS will likely be two cheaper small sata/ssd in raid 1. > > Gluster bricks comprised of 4x2TB WD Gold 7200RPM SATA HDDs in RAID 10 per > server. Using a replica 3 setup (and I'm thinking right now with no > arbiter for extra redundancy, although I'm not sure what the performance > hit may be as a result). Will this allow for two host failure or just one? > > I've been really struggling with storage choices, it seems very difficult > to predict the performance of glusterFS due to the variance in hardware > (everyone is using something different). I'm not sure if the performance > will be adequate enough for my needs. > > I will be using an all ready existing Netgear XS716T 10GB switch for > Gluster storage network. > > In addition I plan to build another simple glusterFS storage server that I > can use to georeplicate the gluster volume to for DR purposes and use > existing hardware to build an independent standby oVirt host that is able > to start up a few high priority VMs from the georeplicated glusterFS volume > if for some reason the primary oVirt cluster/glusterFS volume ever failed. > > I would love to hear any advice or critiques on this plan. > > Thanks! > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From tomkcpr at mdevsys.com Thu Apr 5 06:08:18 2018 From: tomkcpr at mdevsys.com (TomK) Date: Thu, 5 Apr 2018 02:08:18 -0400 Subject: [ovirt-users] oVirt non-self-hosted HA In-Reply-To: References: <28fe034f-863a-2d11-71ff-836178171648@mdevsys.com> Message-ID: <76392b85-cf5d-a249-72d4-b94dc60be9ae@mdevsys.com> On 4/4/2018 3:11 AM, Yaniv Kaul wrote: > > > On Wed, Apr 4, 2018 at 12:39 AM, Tom > wrote: > > > > Sent from my iPhone > > On Apr 3, 2018, at 9:32 AM, Yaniv Kaul > wrote: > >> >> >> On Tue, Apr 3, 2018 at 3:12 PM, TomK > > wrote: >> >> Hey Guy's, >> >> If I'm looking to setup the oVirt engine in an HA >> configuration off the physical servers hosting my VM's (non >> self hosted), what are my options here? >> >> I want to setup two to four active oVirt engine instances >> elsewhere and handle the HA via something like haproxy / >> keepalived to keep the entire experience seamless to the user. >> >> >> You will need to set up the oVirt engine service as well as the PG >> database (and ovirt-engine-dwhd service and any other service we >> run next to the engine) as highly available module. >> In pacemaker[1], for example. >> You'll need to ensure configuration is also sync'ed between nodes, >> etc. >> Y. > > So already have one ovirt engine setup separately on a vm that > manages two remote physical hosts.? So familiar with the single host > approach which I would simply replicate.? At least that?s the idea > anyway.? Could you please expand a bit on the highly available > module and ?syncing the config between hosts? > > > That's a different strategy, which is also legit - you treat this VM as > a highly available resource. Now you do not need to sync the config - > just the VM disk and config. I think there's a postgres component too and if oVirt engine keeps all it's date on the postgres tables, then synchronizing this piece might be all I need? I'm not sure how the separate oVirt engines sitting on various separate physical hosts keep their settings in sync about the rest of the physicals in an oVirt environment. (Assume we may have 100 oVirt physicals for example.) > Perhaps something like > https://www.unixarena.com/2015/12/rhel-7-pacemaker-configuring-ha-kvm-guest.html > . > > But if you are already doing that, I'm not sure why you'd prefer this > over hosted-engine setup. I'm comparing both options. I really don't want to ask too many specific until I have the chance to read into the details of both. > Y. Cheers, Tom > > > Cheers, > Tom > >> >> [1] https://clusterlabs.org/quickstart-redhat.html >> >> >> >> From what I've seen in oVirt, that seems to be possible >> without the two oVirt engines even knowing each other's >> existence but is it something anyone has ever done?? Any >> recommendations in this case? >> >> Having settings replicated would be a bonus but I would be >> comfortable if they weren't and I handle that myself. >> >> -- >> Cheers, >> Tom K. >> ------------------------------------------------------------------------------------- >> >> Living on earth is expensive, but it includes a free trip >> around the sun. >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> >> > -- Cheers, Tom K. ------------------------------------------------------------------------------------- Living on earth is expensive, but it includes a free trip around the sun. From johan at kafit.se Thu Apr 5 06:33:29 2018 From: johan at kafit.se (Johan Bernhardsson) Date: Thu, 05 Apr 2018 08:33:29 +0200 Subject: [ovirt-users] oVirt non-self-hosted HA In-Reply-To: <76392b85-cf5d-a249-72d4-b94dc60be9ae@mdevsys.com> References: <28fe034f-863a-2d11-71ff-836178171648@mdevsys.com> <76392b85-cf5d-a249-72d4-b94dc60be9ae@mdevsys.com> Message-ID: <162948296a8.2780.ffe2d6cdf294efc1bb86526523af9945@kafit.se> The norm is to have a cluster with shared storage. So you have 3 to 5 hardware noed that shares storage for the hosted engine. That shared storage is in sync. So you don't have one engine per physical node. If one hardware node goes down the engine is restarted on another node with the help of hosted-engine service. /Johan On April 5, 2018 08:11:50 TomK wrote: On 4/4/2018 3:11 AM, Yaniv Kaul wrote: On Wed, Apr 4, 2018 at 12:39 AM, Tom > wrote: Sent from my iPhone On Apr 3, 2018, at 9:32 AM, Yaniv Kaul > wrote: On Tue, Apr 3, 2018 at 3:12 PM, TomK > wrote: Hey Guy's, If I'm looking to setup the oVirt engine in an HA configuration off the physical servers hosting my VM's (non self hosted), what are my options here? I want to setup two to four active oVirt engine instances elsewhere and handle the HA via something like haproxy / keepalived to keep the entire experience seamless to the user. You will need to set up the oVirt engine service as well as the PG database (and ovirt-engine-dwhd service and any other service we run next to the engine) as highly available module. In pacemaker[1], for example. You'll need to ensure configuration is also sync'ed between nodes, etc. Y. So already have one ovirt engine setup separately on a vm that manages two remote physical hosts. So familiar with the single host approach which I would simply replicate. At least that?s the idea anyway. Could you please expand a bit on the highly available module and syncing the config between hosts? That's a different strategy, which is also legit - you treat this VM as a highly available resource. Now you do not need to sync the config - just the VM disk and config. I think there's a postgres component too and if oVirt engine keeps all it's date on the postgres tables, then synchronizing this piece might be all I need? I'm not sure how the separate oVirt engines sitting on various separate physical hosts keep their settings in sync about the rest of the physicals in an oVirt environment. (Assume we may have 100 oVirt physicals for example.) Perhaps something like https://www.unixarena.com/2015/12/rhel-7-pacemaker-configuring-ha-kvm-guest.html . But if you are already doing that, I'm not sure why you'd prefer this over hosted-engine setup. I'm comparing both options. I really don't want to ask too many specific until I have the chance to read into the details of both. Y. Cheers, Tom Cheers, Tom [1] https://clusterlabs.org/quickstart-redhat.html >From what I've seen in oVirt, that seems to be possible without the two oVirt engines even knowing each other's existence but is it something anyone has ever done? Any recommendations in this case? Having settings replicated would be a bonus but I would be comfortable if they weren't and I handle that myself. -- Cheers, Tom K. ------------------------------------------------------------------------------------- Living on earth is expensive, but it includes a free trip around the sun. _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Cheers, Tom K. ------------------------------------------------------------------------------------- Living on earth is expensive, but it includes a free trip around the sun. _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users From matonb at ltresources.co.uk Thu Apr 5 06:42:29 2018 From: matonb at ltresources.co.uk (Maton, Brett) Date: Thu, 5 Apr 2018 07:42:29 +0100 Subject: [ovirt-users] Cannot update Node 4.2 to 4.2.2 In-Reply-To: References: Message-ID: shot inthe dark, but have you got EPEL repo enabled by any chance? On 4 April 2018 at 20:20, Vincent Royer wrote: > Trying to update my nodes to 4.2.2, having a hard time. > > I updated the engine, no problems. Migrated VMs off host 1 and put it into > maintenance. I do a "check upgrade" in the GUI, it finds an update, but > fails to install. > > Drop to CLI and try to do it manually > > yum update -y > > I get lots of dependency errors for missing packages. A quick google > shows that I may have the incorrect RPMs installed, and should only have > the ovirt-node-ng-image and appliance rpms. So I try to install only those. > > So I think I have the right rpms now > > > But now when I do a yum update it says there are no packages marked for > update. > > How to fix this? Is there anything I have done wrong that I shouldn't do > on my other hosts? > > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 8926 bytes Desc: not available URL: From ykaul at redhat.com Thu Apr 5 09:29:09 2018 From: ykaul at redhat.com (Yaniv Kaul) Date: Thu, 5 Apr 2018 12:29:09 +0300 Subject: [ovirt-users] oVirt non-self-hosted HA In-Reply-To: <76392b85-cf5d-a249-72d4-b94dc60be9ae@mdevsys.com> References: <28fe034f-863a-2d11-71ff-836178171648@mdevsys.com> <76392b85-cf5d-a249-72d4-b94dc60be9ae@mdevsys.com> Message-ID: On Thu, Apr 5, 2018 at 9:08 AM, TomK wrote: > On 4/4/2018 3:11 AM, Yaniv Kaul wrote: > >> >> >> On Wed, Apr 4, 2018 at 12:39 AM, Tom > tk at mdevsys.com>> wrote: >> >> >> >> Sent from my iPhone >> >> On Apr 3, 2018, at 9:32 AM, Yaniv Kaul > > wrote: >> >> >>> >>> On Tue, Apr 3, 2018 at 3:12 PM, TomK >> > wrote: >>> >>> Hey Guy's, >>> >>> If I'm looking to setup the oVirt engine in an HA >>> configuration off the physical servers hosting my VM's (non >>> self hosted), what are my options here? >>> >>> I want to setup two to four active oVirt engine instances >>> elsewhere and handle the HA via something like haproxy / >>> keepalived to keep the entire experience seamless to the user. >>> >>> >>> You will need to set up the oVirt engine service as well as the PG >>> database (and ovirt-engine-dwhd service and any other service we >>> run next to the engine) as highly available module. >>> In pacemaker[1], for example. >>> You'll need to ensure configuration is also sync'ed between nodes, >>> etc. >>> Y. >>> >> >> So already have one ovirt engine setup separately on a vm that >> manages two remote physical hosts. So familiar with the single host >> approach which I would simply replicate. At least that?s the idea >> anyway. Could you please expand a bit on the highly available >> module and syncing the config between hosts? >> >> >> That's a different strategy, which is also legit - you treat this VM as a >> highly available resource. Now you do not need to sync the config - just >> the VM disk and config. >> > > I think there's a postgres component too and if oVirt engine keeps all > it's date on the postgres tables, then synchronizing this piece might be > all I need? I'm not sure how the separate oVirt engines sitting on various > separate physical hosts keep their settings in sync about the rest of the > physicals in an oVirt environment. (Assume we may have 100 oVirt physicals > for example.) There's more than just the database, although it contains 99% of what you need. See the content of the result of 'engine-backup' command. I think you might be somewhat confusing between the number of oVirt hypervisors (we support hundreds) and the Engine - the management, which is single - and with hosted-engine, it's a single, but highly available virtual machine - that can run on one of several (I suggest 3-8) of those hypervisors. Y. > > > Perhaps something like https://www.unixarena.com/2015 >> /12/rhel-7-pacemaker-configuring-ha-kvm-guest.html . >> >> But if you are already doing that, I'm not sure why you'd prefer this >> over hosted-engine setup. >> > > I'm comparing both options. I really don't want to ask too many specific > until I have the chance to read into the details of both. > > Y. >> > > Cheers, > Tom > > >> >> Cheers, >> Tom >> >> >>> [1] https://clusterlabs.org/quickstart-redhat.html >>> >>> >>> >>> From what I've seen in oVirt, that seems to be possible >>> without the two oVirt engines even knowing each other's >>> existence but is it something anyone has ever done? Any >>> recommendations in this case? >>> >>> Having settings replicated would be a bonus but I would be >>> comfortable if they weren't and I handle that myself. >>> >>> -- Cheers, >>> Tom K. >>> ------------------------------------------------------------ >>> ------------------------- >>> >>> Living on earth is expensive, but it includes a free trip >>> around the sun. >>> >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >>> >>> >> > > -- > Cheers, > Tom K. > ------------------------------------------------------------ > ------------------------- > > Living on earth is expensive, but it includes a free trip around the sun. > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From nicolas at ecarnot.net Thu Apr 5 11:32:32 2018 From: nicolas at ecarnot.net (Nicolas Ecarnot) Date: Thu, 5 Apr 2018 13:32:32 +0200 Subject: [ovirt-users] Why RAW images when using GlusterFS? Message-ID: <9b90c488-1a69-71e9-ffa5-cf4c80634d03@ecarnot.net> Hello, Amongst others, I have one 3.6 DC working very well since years and all based on GlusterFS. When having a close look (qemu-img info) on the images, I see their format is all RAW and not QCOW2. I never noticed or bothered before, but I'm wondering : - is it by design? - it is something we can change (I'd prefer qcow2) - it there some limitations? And finally, I have the same questions about NFS storage domains. Thank you. -- Nicolas ECARNOT From tk at mdevsys.com Thu Apr 5 12:59:19 2018 From: tk at mdevsys.com (Tom) Date: Thu, 5 Apr 2018 08:59:19 -0400 Subject: [ovirt-users] oVirt non-self-hosted HA In-Reply-To: References: <28fe034f-863a-2d11-71ff-836178171648@mdevsys.com> <76392b85-cf5d-a249-72d4-b94dc60be9ae@mdevsys.com> Message-ID: <91F57FDF-6469-4DB4-B9AE-CC5820DACED8@mdevsys.com> Sent from my iPhone > On Apr 5, 2018, at 5:29 AM, Yaniv Kaul wrote: > > > >> On Thu, Apr 5, 2018 at 9:08 AM, TomK wrote: >>> On 4/4/2018 3:11 AM, Yaniv Kaul wrote: >>> >>> >>> On Wed, Apr 4, 2018 at 12:39 AM, Tom > wrote: >>> >>> >>> >>> Sent from my iPhone >>> >>> On Apr 3, 2018, at 9:32 AM, Yaniv Kaul >> > wrote: >>> >>>> >>>> >>>> On Tue, Apr 3, 2018 at 3:12 PM, TomK >>> > wrote: >>>> >>>> Hey Guy's, >>>> >>>> If I'm looking to setup the oVirt engine in an HA >>>> configuration off the physical servers hosting my VM's (non >>>> self hosted), what are my options here? >>>> >>>> I want to setup two to four active oVirt engine instances >>>> elsewhere and handle the HA via something like haproxy / >>>> keepalived to keep the entire experience seamless to the user. >>>> >>>> >>>> You will need to set up the oVirt engine service as well as the PG >>>> database (and ovirt-engine-dwhd service and any other service we >>>> run next to the engine) as highly available module. >>>> In pacemaker[1], for example. >>>> You'll need to ensure configuration is also sync'ed between nodes, >>>> etc. >>>> Y. >>> >>> So already have one ovirt engine setup separately on a vm that >>> manages two remote physical hosts. So familiar with the single host >>> approach which I would simply replicate. At least that?s the idea >>> anyway. Could you please expand a bit on the highly available >>> module and syncing the config between hosts? >>> >>> >>> That's a different strategy, which is also legit - you treat this VM as a highly available resource. Now you do not need to sync the config - just the VM disk and config. >> >> I think there's a postgres component too and if oVirt engine keeps all it's date on the postgres tables, then synchronizing this piece might be all I need? I'm not sure how the separate oVirt engines sitting on various separate physical hosts keep their settings in sync about the rest of the physicals in an oVirt environment. (Assume we may have 100 oVirt physicals for example.) > > There's more than just the database, although it contains 99% of what you need. See the content of the result of 'engine-backup' command. > I think you might be somewhat confusing between the number of oVirt hypervisors (we support hundreds) and the Engine - the management, which is single - and with hosted-engine, it's a single, but highly available virtual machine - that can run on one of several (I suggest 3-8) of those hypervisors. > Y. Yah, still very new to much of this. Thank you again. I?ll take that away and do some reading. Cheers, Tom > >> >> >>> Perhaps something like https://www.unixarena.com/2015/12/rhel-7-pacemaker-configuring-ha-kvm-guest.html . >>> >>> But if you are already doing that, I'm not sure why you'd prefer this over hosted-engine setup. >> >> I'm comparing both options. I really don't want to ask too many specific until I have the chance to read into the details of both. >> >>> Y. >> >> Cheers, >> Tom >> >>> >>> >>> Cheers, >>> Tom >>> >>>> >>>> [1] https://clusterlabs.org/quickstart-redhat.html >>>> >>>> >>>> >>>> From what I've seen in oVirt, that seems to be possible >>>> without the two oVirt engines even knowing each other's >>>> existence but is it something anyone has ever done? Any >>>> recommendations in this case? >>>> >>>> Having settings replicated would be a bonus but I would be >>>> comfortable if they weren't and I handle that myself. >>>> >>>> -- Cheers, >>>> Tom K. >>>> ------------------------------------------------------------------------------------- >>>> >>>> Living on earth is expensive, but it includes a free trip >>>> around the sun. >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users at ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>>> >>> >> >> >> -- >> Cheers, >> Tom K. >> ------------------------------------------------------------------------------------- >> >> Living on earth is expensive, but it includes a free trip around the sun. >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From phudec at cnc.sk Thu Apr 5 13:19:37 2018 From: phudec at cnc.sk (Peter Hudec) Date: Thu, 5 Apr 2018 15:19:37 +0200 Subject: [ovirt-users] Engine reports In-Reply-To: References: <855bb1c1-33c7-d6ec-f513-5702bc2f736c@redhat.com> Message-ID: The version is from /usr/share/ansible/openshift-ansible/roles/openshift_facts/library/openshift_facts.py:get_openshift_version [PROD] root at dipostat01.cnc.sk: /usr/share/ansible/openshift-ansible # /usr/bin/openshift version openshift v3.10.0-alpha.0+f0186dd-401 kubernetes v1.9.1+a0ce1bc657 etcd 3.2.16 this binary is from the origin-3.7.2-1.el7.git.0.f0186dd.x86_64 package [PROD] root at dipostat01.cnc.sk: ~ # rpm -qf /usr/bin/openshift origin-3.7.2-1.el7.git.0.f0186dd.x86_64 Hmm, why the version do not match ? Peter On 04/04/2018 17:41, Shirly Radco wrote: > Hi, > > > I have a updated the installation instructions for installing OpenShift > 3.9, based on Rich's work , for the oVirt use case. > > Please make sure where you get the 3.10 rpm and disable that repo. > > This is the PR that includes the metrics store installation of OpenShift 3.9 > > https://github.com/sradco/ovirt-site/blob/74f1e772c8ca75d4b9e57a3c02cce49c5030f7f7/source/develop/release-management/features/metrics/setting-up-viaq-logging.html.md > > It should be merged soon, but you can use it to install. > > > Please make sure to add the?ansible-inventory-origin-39-aio file as > described below. > These are required parameters for the ansible playbook. > > > Best regards, > > -- > > SHIRLY?RADCO > > BI SeNIOR SOFTWARE ENGINEER > > Red Hat?Israel > > > TRIED. TESTED. TRUSTED. > > > On Wed, Apr 4, 2018 at 5:41 PM, Rich Megginson > wrote: > > I'm sorry.? I misunderstood the request. > > We are in the process of updating the instructions for installing > viaq logging based on upstream origin 3.9 - > https://github.com/ViaQ/Main/pull/37 > > > In the meantime, you can follow along on that PR, and we will have > instructions very soon. > > > On 04/04/2018 08:26 AM, Rich Megginson wrote: > > On 04/04/2018 08:22 AM, Shirly Radco wrote: > > > > -- > > SHIRLY RADCO > > BI SeNIOR SOFTWARE ENGINEER > > Red Hat Israel > > > TRIED. TESTED. TRUSTED. > > > On Wed, Apr 4, 2018 at 5:07 PM, Peter Hudec >> wrote: > > ??? almost the same issue, the versio for openshoft release > changed to 3.9 > > ??? Failure summary: > > > ??? ? 1. Hosts:? ? localhost > ??? ? ? ?Play:? ? ?Determine openshift_version to configure > on first > ??? master > ??? ? ? ?Task:? ? ?For an RPM install, abort when the release > ??? requested does > ??? not match the available version. > ??? ? ? ?Message:? You requested openshift_release 3.9, > which is not > ??? matched by > ??? ? ? ? ? ? ? ? ?the latest OpenShift RPM we detected as > origin-3.10.0 > ??? ? ? ? ? ? ? ? ?on host localhost. > ??? ? ? ? ? ? ? ? ?We will only install the latest RPMs, so > please ensure > ??? you are getting the release > ??? ? ? ? ? ? ? ? ?you expect. You may need to adjust your > Ansible > ??? inventory, modify the repositories > ??? ? ? ? ? ? ? ? ?available on the host, or run the > appropriate OpenShift > ??? upgrade playbook. > > > What is the rpm version installed of OpenShift?origin? > Do you perhaps have another repo that includes the OpenShift > origin-3.10.0? > > > origin is the upstream version of OpenShift, which is unsupported. > > sudo repoquery -i origin > > This will tell you which repo it came from > > You will need to disable that repo and uninstall any packages > which came from that repo > > Another mystery is why it is trying to install origin in the > first place.? openshift-ansible with > openshift_deployment_type=openshift-enterprise should not try to > install origin, it should install packages with names like > atomic-openshift-master, atomic-openshift-node, etc. > > > > > ??? On 04/04/2018 14:18, Shirly Radco wrote: > ??? > Adding Nicolas since he hit the same issue. > ??? > > ??? > -- > ??? > > ??? > SHIRLY?RADCO > ??? > > ??? > BI SeNIOR SOFTWARE ENGINEER > ??? > > ??? > Red Hat?Israel > ??? > > ??? > > ??? > TRIED. TESTED. TRUSTED. > ??? > > ??? > > ??? > On Wed, Apr 4, 2018 at 3:17 PM, Shirly Radco > > > > ??? > > >>> wrote: > ??? > > ??? >? ? ?Hi Peter, > ??? > > ??? >? ? ?The installation instructions currently support > OpenShift 3.6. > ??? > > ??? >? ? ?I'm now working on updating them to support 3.9. > ??? > > ??? >? ? ?You currently have 3.10 installed. > ??? > > ??? >? ? ?Please install OpenShift 3.9 using this repository > ??? > > https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo > > > > ??? > > ? > >> > ??? > > ??? >? ? ?And add the following file to your vm > ??? > > ??? >? ? ?Run: > ??? >? ? ?vi /root/ansible-inventory-origin-39-aio > ??? > > ??? >? ? ?Add: > ??? > > ??? >? ? ?-------------- > ??? >? ? ?[OSEv3:children] > ??? >? ? ?nodes > ??? >? ? ?masters > ??? >? ? ?etcd > ??? > > ??? >? ? ?[OSEv3:vars] > ??? >? ? ?ansible_connection=local > ??? >? ? ?openshift_release=v3.9 > ??? >? ? ?openshift_logging_install_logging=true > ??? >? ? ?short_version=3.9 > ??? >? ? ?openshift_deployment_type=origin > ??? > > ?openshift_master_identity_providers=[{'mappingMethod': > 'lookup', > ??? >? ? ?'challenge': 'true', 'login': 'true', 'kind': > ??? >? ? ?'AllowAllPasswordIdentityProvider', 'name': > 'allow_all'}] > ??? >? ? ?# bug - doesn't use correct tag > ??? >? ? ?openshift_logging_image_version=v3.9 > ??? > > ?openshift_logging_elasticsearch_proxy_image_version=v1.0.0 > ??? > > ??? >? ? ?openshift_logging_es_allow_external=True > ??? >? ? ?openshift_logging_use_mux=True > ??? >? ? ?openshift_logging_mux_allow_external=True > ??? > ?openshift_logging_mux_file_buffer_storage_type=hostmount > ??? > ?openshift_logging_elasticsearch_storage_type=hostmount > ??? > > ?openshift_logging_elasticsearch_hostmount_path=/var/lib/elasticsearch > ??? > > ??? >? ? ?[nodes] > ??? >? ? ?localhost storage=True > openshift_node_labels="{'region': > ??? 'infra'}" > ??? >? ? ?openshift_schedulable=True > ??? > > ??? >? ? ?[masters] > ??? >? ? ?localhost storage=True > openshift_node_labels="{'region': > ??? 'infra'}" > ??? >? ? ?openshift_schedulable=True > ??? > > ??? >? ? ?[etcd] > ??? >? ? ?localhost storage=True > openshift_node_labels="{'region': > ??? 'infra'}" > ??? >? ? ?openshift_schedulable=True > ??? > > ??? > > ??? >? ? ?------------ > ??? > > ??? >? ? ?Save and exit. > ??? > > ??? > > ??? >? ? ?***Please make sure that you use /var as your > Elasticsearch > ??? >? ? ?persistent storage directory. > ??? > > ??? >? ? ?And when you run the OpenShift ansible > ??? > > ?(https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible > > > > ??? > > ? > >>) > ??? >? ? ?use the file you just created like this: > ??? > > ??? >? ? ?# cd /usr/share/ansible/openshift-ansible > ??? >? ? ?# (or wherever you cloned the git repo if using git) > ??? >? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook > -vvv -e > ??? >? ? ?@/root/vars.yaml -i > /root/*ansible-inventory-origin-39-aio* > ??? >? ? ?playbooks/byo/config.yml > ??? > > ??? >? ? ?Best regards, > ??? > > ??? >? ? ?-- > ??? > > ??? >? ? ?SHIRLY?RADCO > ??? > > ??? >? ? ?BI SeNIOR SOFTWARE ENGINEER > ??? > > ??? >? ? ?Red Hat?Israel > ??? > > ??? >? ? ? > ??? >? ? ?TRIED. TESTED. TRUSTED. > ??? > > ??? > > ??? >? ? ?On Wed, Apr 4, 2018 at 12:17 PM, Peter Hudec > > > ??? >? ? ? > >>> wrote: > ??? > > ??? >? ? ? ? ?Tried to install ovirt metrics, but got error > ??? > > ??? >? ? ? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log > ansible-playbook -vvv -e > ??? >? ? ? ? ?@/root/vars.yaml -i > /root/ansible-inventory-origin-37-aio > ??? >? ? ? ? ?playbooks/byo/config.yml > ??? > > ??? >? ? ? ? ?? 1. Hosts:? ? localhost > ??? >? ? ? ? ?? ? ?Play:? ? ?Determine openshift_version to > configure > ??? on first > ??? >? ? ? ? ?master > ??? >? ? ? ? ?? ? ?Task:? ? ?For an RPM install, abort when > the release > ??? >? ? ? ? ?requested does > ??? >? ? ? ? ?not match the available version. > ??? >? ? ? ? ?? ? ?Message:? You requested openshift_release > 3.7, > ??? which is not > ??? >? ? ? ? ?matched by > ??? >? ? ? ? ?? ? ? ? ? ? ? ?the latest OpenShift RPM we > detected as > ??? origin-3.10.0 > ??? >? ? ? ? ?? ? ? ? ? ? ? ?on host localhost. > ??? >? ? ? ? ?? ? ? ? ? ? ? ?We will only install the latest > RPMs, so > ??? please > ??? >? ? ? ? ?ensure > ??? >? ? ? ? ?you are getting the release > ??? >? ? ? ? ?? ? ? ? ? ? ? ?you expect. You may need to > adjust your > ??? Ansible > ??? >? ? ? ? ?inventory, modify the repositories > ??? >? ? ? ? ?? ? ? ? ? ? ? ?available on the host, or run > the appropriate > ??? >? ? ? ? ?OpenShift > ??? >? ? ? ? ?upgrade playbook. > ??? > > ??? >? ? ? ? ?? ? ? ? regards > ??? >? ? ? ? ?? ? ? ? ? ? ? ? Peter > ??? > > ??? > > ??? >? ? ? ? ?On 04/04/2018 09:13, Fred Rolland wrote: > ??? >? ? ? ? ?> Hi, > ??? >? ? ? ? ?> > ??? >? ? ? ? ?> Check these links: > ??? >? ? ? ? ?> > ??? >? ? ? ? ?> > ??? > https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ > > > > ??? > > ? > >> > ??? >? ? ? ? ?> > https://ovirt.org/develop/release-management/features/metrics/metrics-store/ > > > > ??? > > ? > >> > ??? >? ? ? ? ?> > ??? >? ? ? ? ?> Regards, > ??? >? ? ? ? ?> Fred > ??? >? ? ? ? ?> > ??? >? ? ? ? ?> On Tue, Apr 3, 2018 at 9:38 AM, Anantha Raghava > ??? >? ? ? ? ?> > ??? > > ??? >? ? ? ? ? > ??? >> > ??? >? ? ? ? ? > ??? > > ??? >? ? ? ? ? > ??? >>>> > ??? >? ? ? ? ?> wrote: > ??? >? ? ? ? ?> > ??? >? ? ? ? ?>? ? ?Hi, > ??? >? ? ? ? ?> > ??? >? ? ? ? ?>? ? ?I see that oVirt DWH is installed with > Version > ??? 4.2.x. Now, how do I > ??? >? ? ? ? ?>? ? ?take the reports? I version 3.5, we had > Jasper > ??? reports module using > ??? >? ? ? ? ?>? ? ?which we could take utilization reports. > Can we do > ??? something similar > ??? >? ? ? ? ?>? ? ?here? > ??? >? ? ? ? ?> > ??? >? ? ? ? ?>? ? ?-- > ??? >? ? ? ? ?> > ??? >? ? ? ? ?>? ? ?Thanks & Regards, > ??? >? ? ? ? ?> > ??? >? ? ? ? ?> > ??? >? ? ? ? ?>? ? ?Anantha Raghava > ??? >? ? ? ? ?> > ??? >? ? ? ? ?> > ??? >? ? ? ? ?>? ? ?Do not print this e-mail unless > required. Save > ??? Paper & trees. > ??? >? ? ? ? ?> > ??? >? ? ? ? ?> > ??? >? ? ? ? ?> ?_______________________________________________ > ??? >? ? ? ? ?>? ? ?Users mailing list > ??? >? ? ? ? ?> Users at ovirt.org > > > ??? > >> > ??? >? ? ? ? ? > > ??? > >>> > ??? >? ? ? ? ?> > http://lists.ovirt.org/mailman/listinfo/users > > ??? > > ??? > ? > ??? >> > ??? >? ? ? ? ?> > ? > ??? > > ??? > ? > >>> > ??? >? ? ? ? ?> > ??? >? ? ? ? ?> > ??? >? ? ? ? ?> > ??? >? ? ? ? ?> > ??? >? ? ? ? ?> _______________________________________________ > ??? >? ? ? ? ?> Users mailing list > ??? >? ? ? ? ?> Users at ovirt.org > > > ??? > >> > ??? >? ? ? ? ?> > http://lists.ovirt.org/mailman/listinfo/users > > ??? > > ??? > ? > ??? >> > ??? >? ? ? ? ?> > ??? > > ??? > > ??? >? ? ? ? ?-- > ??? >? ? ? ? ?*Peter Hudec* > ??? >? ? ? ? ?Infra?trukt?rny architekt > ??? > phudec at cnc.sk > > > > ??? >> > > > > ??? >?????? ? > >>> > ??? > > ??? >? ? ? ? ?*CNC,?a.s.* > ??? >? ? ? ? ?Borsk? 6,?841 04 Bratislava > ??? >? ? ? ? ?Recepcia:?+421 2? 35 000 100 > ??? > > ??? >? ? ? ? ?Mobil:+421?905 997 203 > ??? >? ? ? ? ?*www.cnc.sk > * > ??? > ??? >? ? ? ? ?> > ??? > > ??? >?????? ?_______________________________________________ > ??? >? ? ? ? ?Users mailing list > ??? > Users at ovirt.org > > > > ??? >> > ??? > http://lists.ovirt.org/mailman/listinfo/users > > ??? > > ??? > ? > ??? >> > ??? > > ??? > > ??? > > > > ??? -- > ??? *Peter Hudec* > ??? Infra?trukt?rny architekt > ??? phudec at cnc.sk > > > > ??? >> > > ??? *CNC,?a.s.* > ??? Borsk? 6,?841 04 Bratislava > ??? Recepcia:?+421 2? 35 000 100 > > ??? Mobil:+421?905 997 203 > ??? *www.cnc.sk * > > ??? > > > > > > -- *Peter Hudec* Infra?trukt?rny architekt phudec at cnc.sk *CNC,?a.s.* Borsk? 6,?841 04 Bratislava Recepcia:?+421 2? 35 000 100 Mobil:+421?905 997 203 *www.cnc.sk* From sbonazzo at redhat.com Thu Apr 5 13:42:31 2018 From: sbonazzo at redhat.com (Sandro Bonazzola) Date: Thu, 5 Apr 2018 15:42:31 +0200 Subject: [ovirt-users] Updates to oVirt 4.2.2 Message-ID: Hi, the oVirt team released today April 5th an update to oVirt 4.2.2 including the following packages: - ovirt-hosted-engine-ha-2.2.10 - ovirt-hosted-engine-setup-2.2.16 - cockpit-ovirt-0.11.20-1 - ovirt-release42-4.2.2-3 Addressing the following issues: - [BZ 1560666 ] - Hosted Engine VM (deployed in the past) fails to reboot with 'libvirtError: internal error: failed to format device alias for PTY retrieval' due to an error in console device in libvirt XML generated by the engine - [BZ 1560551 ] - The user is asked twice to enter engine VM FQDN - [BZ 1560655 ] - Node 0 flow is consuming the portal IP used for the discovery. - [BZ 1562349 ] - Upgrade appliance failed with 'Environment customization': 'OVEHOSTED_STORAGE/spUUID' - [BZ 1563664 ] - Ansible deployments fails on NFS with root_squash option - [BZ 1562011 ] - Ansible: Deploy HE failed with FC storage via cockpit. - Switch to signed RPMs yum repository for CentOS Virt SIG on ppc64le An update for oVirt Node is already available. An updated oVirt Node ISO is being composed right now and will be available for download by tomorrow morning. -- SANDRO BONAZZOLA ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D Red Hat EMEA sbonazzo at redhat.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From rmeggins at redhat.com Thu Apr 5 14:11:13 2018 From: rmeggins at redhat.com (Rich Megginson) Date: Thu, 5 Apr 2018 08:11:13 -0600 Subject: [ovirt-users] Engine reports In-Reply-To: References: <855bb1c1-33c7-d6ec-f513-5702bc2f736c@redhat.com> Message-ID: Is it possible that you could start over from scratch, using the latest instructions/files at https://github.com/ViaQ/Main/pull/37/files? On 04/05/2018 07:19 AM, Peter Hudec wrote: > The version is from > > /usr/share/ansible/openshift-ansible/roles/openshift_facts/library/openshift_facts.py:get_openshift_version > > [PROD] root at dipostat01.cnc.sk: /usr/share/ansible/openshift-ansible # > /usr/bin/openshift version > openshift v3.10.0-alpha.0+f0186dd-401 > kubernetes v1.9.1+a0ce1bc657 > etcd 3.2.16 > > this binary is from the origin-3.7.2-1.el7.git.0.f0186dd.x86_64 package > > [PROD] root at dipostat01.cnc.sk: ~ # rpm -qf /usr/bin/openshift > origin-3.7.2-1.el7.git.0.f0186dd.x86_64 > > Hmm, why the version do not match ? > > Peter > > On 04/04/2018 17:41, Shirly Radco wrote: >> Hi, >> >> >> I have a updated the installation instructions for installing OpenShift >> 3.9, based on Rich's work , for the oVirt use case. >> >> Please make sure where you get the 3.10 rpm and disable that repo. >> >> This is the PR that includes the metrics store installation of OpenShift 3.9 >> >> https://github.com/sradco/ovirt-site/blob/74f1e772c8ca75d4b9e57a3c02cce49c5030f7f7/source/develop/release-management/features/metrics/setting-up-viaq-logging.html.md >> >> It should be merged soon, but you can use it to install. >> >> >> Please make sure to add the?ansible-inventory-origin-39-aio file as >> described below. >> These are required parameters for the ansible playbook. >> >> >> Best regards, >> >> -- >> >> SHIRLY?RADCO >> >> BI SeNIOR SOFTWARE ENGINEER >> >> Red Hat?Israel >> >> >> TRIED. TESTED. TRUSTED. >> >> >> On Wed, Apr 4, 2018 at 5:41 PM, Rich Megginson > > wrote: >> >> I'm sorry.? I misunderstood the request. >> >> We are in the process of updating the instructions for installing >> viaq logging based on upstream origin 3.9 - >> https://github.com/ViaQ/Main/pull/37 >> >> >> In the meantime, you can follow along on that PR, and we will have >> instructions very soon. >> >> >> On 04/04/2018 08:26 AM, Rich Megginson wrote: >> >> On 04/04/2018 08:22 AM, Shirly Radco wrote: >> >> >> >> -- >> >> SHIRLY RADCO >> >> BI SeNIOR SOFTWARE ENGINEER >> >> Red Hat Israel >> >> >> TRIED. TESTED. TRUSTED. >> >> >> On Wed, Apr 4, 2018 at 5:07 PM, Peter Hudec > > >> wrote: >> >> ??? almost the same issue, the versio for openshoft release >> changed to 3.9 >> >> ??? Failure summary: >> >> >> ??? ? 1. Hosts:? ? localhost >> ??? ? ? ?Play:? ? ?Determine openshift_version to configure >> on first >> ??? master >> ??? ? ? ?Task:? ? ?For an RPM install, abort when the release >> ??? requested does >> ??? not match the available version. >> ??? ? ? ?Message:? You requested openshift_release 3.9, >> which is not >> ??? matched by >> ??? ? ? ? ? ? ? ? ?the latest OpenShift RPM we detected as >> origin-3.10.0 >> ??? ? ? ? ? ? ? ? ?on host localhost. >> ??? ? ? ? ? ? ? ? ?We will only install the latest RPMs, so >> please ensure >> ??? you are getting the release >> ??? ? ? ? ? ? ? ? ?you expect. You may need to adjust your >> Ansible >> ??? inventory, modify the repositories >> ??? ? ? ? ? ? ? ? ?available on the host, or run the >> appropriate OpenShift >> ??? upgrade playbook. >> >> >> What is the rpm version installed of OpenShift?origin? >> Do you perhaps have another repo that includes the OpenShift >> origin-3.10.0? >> >> >> origin is the upstream version of OpenShift, which is unsupported. >> >> sudo repoquery -i origin >> >> This will tell you which repo it came from >> >> You will need to disable that repo and uninstall any packages >> which came from that repo >> >> Another mystery is why it is trying to install origin in the >> first place.? openshift-ansible with >> openshift_deployment_type=openshift-enterprise should not try to >> install origin, it should install packages with names like >> atomic-openshift-master, atomic-openshift-node, etc. >> >> >> >> >> ??? On 04/04/2018 14:18, Shirly Radco wrote: >> ??? > Adding Nicolas since he hit the same issue. >> ??? > >> ??? > -- >> ??? > >> ??? > SHIRLY?RADCO >> ??? > >> ??? > BI SeNIOR SOFTWARE ENGINEER >> ??? > >> ??? > Red Hat?Israel >> ??? > >> ??? > >> ??? > TRIED. TESTED. TRUSTED. >> ??? > >> ??? > >> ??? > On Wed, Apr 4, 2018 at 3:17 PM, Shirly Radco >> >> > >> ??? > >> >>> wrote: >> ??? > >> ??? >? ? ?Hi Peter, >> ??? > >> ??? >? ? ?The installation instructions currently support >> OpenShift 3.6. >> ??? > >> ??? >? ? ?I'm now working on updating them to support 3.9. >> ??? > >> ??? >? ? ?You currently have 3.10 installed. >> ??? > >> ??? >? ? ?Please install OpenShift 3.9 using this repository >> ??? > >> https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo >> >> > > >> ??? > >> ?> >> > >> >> ??? > >> ??? >? ? ?And add the following file to your vm >> ??? > >> ??? >? ? ?Run: >> ??? >? ? ?vi /root/ansible-inventory-origin-39-aio >> ??? > >> ??? >? ? ?Add: >> ??? > >> ??? >? ? ?-------------- >> ??? >? ? ?[OSEv3:children] >> ??? >? ? ?nodes >> ??? >? ? ?masters >> ??? >? ? ?etcd >> ??? > >> ??? >? ? ?[OSEv3:vars] >> ??? >? ? ?ansible_connection=local >> ??? >? ? ?openshift_release=v3.9 >> ??? >? ? ?openshift_logging_install_logging=true >> ??? >? ? ?short_version=3.9 >> ??? >? ? ?openshift_deployment_type=origin >> ??? > >> ?openshift_master_identity_providers=[{'mappingMethod': >> 'lookup', >> ??? >? ? ?'challenge': 'true', 'login': 'true', 'kind': >> ??? >? ? ?'AllowAllPasswordIdentityProvider', 'name': >> 'allow_all'}] >> ??? >? ? ?# bug - doesn't use correct tag >> ??? >? ? ?openshift_logging_image_version=v3.9 >> ??? > >> ?openshift_logging_elasticsearch_proxy_image_version=v1.0.0 >> ??? > >> ??? >? ? ?openshift_logging_es_allow_external=True >> ??? >? ? ?openshift_logging_use_mux=True >> ??? >? ? ?openshift_logging_mux_allow_external=True >> ??? > ?openshift_logging_mux_file_buffer_storage_type=hostmount >> ??? > ?openshift_logging_elasticsearch_storage_type=hostmount >> ??? > >> ?openshift_logging_elasticsearch_hostmount_path=/var/lib/elasticsearch >> ??? > >> ??? >? ? ?[nodes] >> ??? >? ? ?localhost storage=True >> openshift_node_labels="{'region': >> ??? 'infra'}" >> ??? >? ? ?openshift_schedulable=True >> ??? > >> ??? >? ? ?[masters] >> ??? >? ? ?localhost storage=True >> openshift_node_labels="{'region': >> ??? 'infra'}" >> ??? >? ? ?openshift_schedulable=True >> ??? > >> ??? >? ? ?[etcd] >> ??? >? ? ?localhost storage=True >> openshift_node_labels="{'region': >> ??? 'infra'}" >> ??? >? ? ?openshift_schedulable=True >> ??? > >> ??? > >> ??? >? ? ?------------ >> ??? > >> ??? >? ? ?Save and exit. >> ??? > >> ??? > >> ??? >? ? ?***Please make sure that you use /var as your >> Elasticsearch >> ??? >? ? ?persistent storage directory. >> ??? > >> ??? >? ? ?And when you run the OpenShift ansible >> ??? > >> ?(https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible >> >> > > >> ??? > >> ?> >> > >>) >> ??? >? ? ?use the file you just created like this: >> ??? > >> ??? >? ? ?# cd /usr/share/ansible/openshift-ansible >> ??? >? ? ?# (or wherever you cloned the git repo if using git) >> ??? >? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook >> -vvv -e >> ??? >? ? ?@/root/vars.yaml -i >> /root/*ansible-inventory-origin-39-aio* >> ??? >? ? ?playbooks/byo/config.yml >> ??? > >> ??? >? ? ?Best regards, >> ??? > >> ??? >? ? ?-- >> ??? > >> ??? >? ? ?SHIRLY?RADCO >> ??? > >> ??? >? ? ?BI SeNIOR SOFTWARE ENGINEER >> ??? > >> ??? >? ? ?Red Hat?Israel >> ??? > >> ??? >? ? ? >> ??? >? ? ?TRIED. TESTED. TRUSTED. >> ??? > >> ??? > >> ??? >? ? ?On Wed, Apr 4, 2018 at 12:17 PM, Peter Hudec >> > > >> ??? >? ? ? >> >>> wrote: >> ??? > >> ??? >? ? ? ? ?Tried to install ovirt metrics, but got error >> ??? > >> ??? >? ? ? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log >> ansible-playbook -vvv -e >> ??? >? ? ? ? ?@/root/vars.yaml -i >> /root/ansible-inventory-origin-37-aio >> ??? >? ? ? ? ?playbooks/byo/config.yml >> ??? > >> ??? >? ? ? ? ?? 1. Hosts:? ? localhost >> ??? >? ? ? ? ?? ? ?Play:? ? ?Determine openshift_version to >> configure >> ??? on first >> ??? >? ? ? ? ?master >> ??? >? ? ? ? ?? ? ?Task:? ? ?For an RPM install, abort when >> the release >> ??? >? ? ? ? ?requested does >> ??? >? ? ? ? ?not match the available version. >> ??? >? ? ? ? ?? ? ?Message:? You requested openshift_release >> 3.7, >> ??? which is not >> ??? >? ? ? ? ?matched by >> ??? >? ? ? ? ?? ? ? ? ? ? ? ?the latest OpenShift RPM we >> detected as >> ??? origin-3.10.0 >> ??? >? ? ? ? ?? ? ? ? ? ? ? ?on host localhost. >> ??? >? ? ? ? ?? ? ? ? ? ? ? ?We will only install the latest >> RPMs, so >> ??? please >> ??? >? ? ? ? ?ensure >> ??? >? ? ? ? ?you are getting the release >> ??? >? ? ? ? ?? ? ? ? ? ? ? ?you expect. You may need to >> adjust your >> ??? Ansible >> ??? >? ? ? ? ?inventory, modify the repositories >> ??? >? ? ? ? ?? ? ? ? ? ? ? ?available on the host, or run >> the appropriate >> ??? >? ? ? ? ?OpenShift >> ??? >? ? ? ? ?upgrade playbook. >> ??? > >> ??? >? ? ? ? ?? ? ? ? regards >> ??? >? ? ? ? ?? ? ? ? ? ? ? ? Peter >> ??? > >> ??? > >> ??? >? ? ? ? ?On 04/04/2018 09:13, Fred Rolland wrote: >> ??? >? ? ? ? ?> Hi, >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> Check these links: >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> >> >> https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ >> >> > > >> ??? > >> ?> >> > >> >> ??? >? ? ? ? ?> >> https://ovirt.org/develop/release-management/features/metrics/metrics-store/ >> >> > > >> ??? > >> ?> >> > >> >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> Regards, >> ??? >? ? ? ? ?> Fred >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> On Tue, Apr 3, 2018 at 9:38 AM, Anantha Raghava >> ??? >? ? ? ? ?> > >> ??? > > >> ??? >? ? ? ? ?> >> ??? > >> >> ??? >? ? ? ? ?> >> ??? > > >> ??? >? ? ? ? ?> >> ??? > >>>> >> ??? >? ? ? ? ?> wrote: >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?>? ? ?Hi, >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?>? ? ?I see that oVirt DWH is installed with >> Version >> ??? 4.2.x. Now, how do I >> ??? >? ? ? ? ?>? ? ?take the reports? I version 3.5, we had >> Jasper >> ??? reports module using >> ??? >? ? ? ? ?>? ? ?which we could take utilization reports. >> Can we do >> ??? something similar >> ??? >? ? ? ? ?>? ? ?here? >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?>? ? ?-- >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?>? ? ?Thanks & Regards, >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?>? ? ?Anantha Raghava >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?>? ? ?Do not print this e-mail unless >> required. Save >> ??? Paper & trees. >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> ?_______________________________________________ >> ??? >? ? ? ? ?>? ? ?Users mailing list >> ??? >? ? ? ? ?> Users at ovirt.org >> > >> ??? >> >> >> ??? >? ? ? ? ?> > > >> ??? >> >>> >> ??? >? ? ? ? ?> >> http://lists.ovirt.org/mailman/listinfo/users >> >> ??? > > >> ??? > ?> >> ??? > >> >> ??? >? ? ? ? ?> >> ?> >> ??? > > >> ??? > ?> >> > >>> >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> >> ??? >? ? ? ? ?> _______________________________________________ >> ??? >? ? ? ? ?> Users mailing list >> ??? >? ? ? ? ?> Users at ovirt.org >> > >> ??? >> >> >> ??? >? ? ? ? ?> >> http://lists.ovirt.org/mailman/listinfo/users >> >> ??? > > >> ??? > ?> >> ??? > >> >> ??? >? ? ? ? ?> >> ??? > >> ??? > >> ??? >? ? ? ? ?-- >> ??? >? ? ? ? ?*Peter Hudec* >> ??? >? ? ? ? ?Infra?trukt?rny architekt >> ??? > phudec at cnc.sk >> > >> >> ??? >> >> >> > >> ??? >?????? ? >> >>> >> ??? > >> ??? >? ? ? ? ?*CNC,?a.s.* >> ??? >? ? ? ? ?Borsk? 6,?841 04 Bratislava >> ??? >? ? ? ? ?Recepcia:?+421 2? 35 000 100 >> ??? > >> ??? >? ? ? ? ?Mobil:+421?905 997 203 >> ??? >? ? ? ? ?*www.cnc.sk >> * >> ??? >> ??? >? ? ? ? ?> >> ??? > >> ??? >?????? ?_______________________________________________ >> ??? >? ? ? ? ?Users mailing list >> ??? > Users at ovirt.org >> > >> >> ??? >> >> ??? > http://lists.ovirt.org/mailman/listinfo/users >> >> ??? > > >> ??? > ?> >> ??? > >> >> ??? > >> ??? > >> ??? > >> >> >> ??? -- >> ??? *Peter Hudec* >> ??? Infra?trukt?rny architekt >> ??? phudec at cnc.sk >> > >> >> ??? >> >> >> ??? *CNC,?a.s.* >> ??? Borsk? 6,?841 04 Bratislava >> ??? Recepcia:?+421 2? 35 000 100 >> >> ??? Mobil:+421?905 997 203 >> ??? *www.cnc.sk * >> >> ??? > >> >> >> >> >> > From lorenzetto.luca at gmail.com Thu Apr 5 14:22:56 2018 From: lorenzetto.luca at gmail.com (Luca 'remix_tj' Lorenzetto) Date: Thu, 5 Apr 2018 16:22:56 +0200 Subject: [ovirt-users] Is compatibility level change required for upgrading from 4.0 to 4.2? Message-ID: Hello, we're planning an upgrade of an old 4.0 setup to 4.2, going through 4.1. What we found out is that when upgrading from major to major, cluster and datacenter compatibility upgrade has to be done at the end of the upgrade. This means that we also require to restart our VMs for adapting the compatibility level. Do we require to upgrade the compatibility level to 4.1 before starting the upgrade to 4.2? We have more than 400 vms and only few of them can be restarted at our convenience. -- "E' assurdo impiegare gli uomini di intelligenza eccellente per fare calcoli che potrebbero essere affidati a chiunque se si usassero delle macchine" Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716) "Internet ? la pi? grande biblioteca del mondo. Ma il problema ? che i libri sono tutti sparsi sul pavimento" John Allen Paulos, Matematico (1945-vivente) Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , From phudec at cnc.sk Thu Apr 5 16:57:22 2018 From: phudec at cnc.sk (Peter Hudec) Date: Thu, 5 Apr 2018 18:57:22 +0200 Subject: [ovirt-users] Engine reports In-Reply-To: References: <855bb1c1-33c7-d6ec-f513-5702bc2f736c@redhat.com> Message-ID: <583759ee-b088-b931-f8ba-919f41332492@cnc.sk> Since it's still not installed, yes ;) On 05/04/2018 16:11, Rich Megginson wrote: > Is it possible that you could start over from scratch, using the latest > instructions/files at > https://github.com/ViaQ/Main/pull/37/files? > > On 04/05/2018 07:19 AM, Peter Hudec wrote: >> The version is from >> >> /usr/share/ansible/openshift-ansible/roles/openshift_facts/library/openshift_facts.py:get_openshift_version >> >> >> [PROD] root at dipostat01.cnc.sk: /usr/share/ansible/openshift-ansible # >> /usr/bin/openshift version >> openshift v3.10.0-alpha.0+f0186dd-401 >> kubernetes v1.9.1+a0ce1bc657 >> etcd 3.2.16 >> >> this binary is from the origin-3.7.2-1.el7.git.0.f0186dd.x86_64 package >> >> [PROD] root at dipostat01.cnc.sk: ~ # rpm -qf /usr/bin/openshift >> origin-3.7.2-1.el7.git.0.f0186dd.x86_64 >> >> Hmm, why the version do not match ? >> >> ????Peter >> >> On 04/04/2018 17:41, Shirly Radco wrote: >>> Hi, >>> >>> >>> I have a updated the installation instructions for installing OpenShift >>> 3.9, based on Rich's work , for the oVirt use case. >>> >>> Please make sure where you get the 3.10 rpm and disable that repo. >>> >>> This is the PR that includes the metrics store installation of >>> OpenShift 3.9 >>> >>> https://github.com/sradco/ovirt-site/blob/74f1e772c8ca75d4b9e57a3c02cce49c5030f7f7/source/develop/release-management/features/metrics/setting-up-viaq-logging.html.md >>> >>> >>> It should be merged soon, but you can use it to install. >>> >>> >>> Please make sure to add the?ansible-inventory-origin-39-aio file as >>> described below. >>> These are required parameters for the ansible playbook. >>> >>> >>> Best regards, >>> >>> -- >>> >>> SHIRLY?RADCO >>> >>> BI SeNIOR SOFTWARE ENGINEER >>> >>> Red Hat?Israel >>> >>> ??? >>> TRIED. TESTED. TRUSTED. >>> >>> >>> On Wed, Apr 4, 2018 at 5:41 PM, Rich Megginson >> > wrote: >>> >>> ???? I'm sorry.? I misunderstood the request. >>> >>> ???? We are in the process of updating the instructions for installing >>> ???? viaq logging based on upstream origin 3.9 - >>> ???? https://github.com/ViaQ/Main/pull/37 >>> ???? >>> >>> ???? In the meantime, you can follow along on that PR, and we will have >>> ???? instructions very soon. >>> >>> >>> ???? On 04/04/2018 08:26 AM, Rich Megginson wrote: >>> >>> ???????? On 04/04/2018 08:22 AM, Shirly Radco wrote: >>> >>> >>> >>> ???????????? -- >>> >>> ???????????? SHIRLY RADCO >>> >>> ???????????? BI SeNIOR SOFTWARE ENGINEER >>> >>> ???????????? Red Hat Israel >>> >>> ???????????? >>> ???????????? TRIED. TESTED. TRUSTED. >>> >>> >>> ???????????? On Wed, Apr 4, 2018 at 5:07 PM, Peter Hudec >> ???????????? >> ???????????? >> wrote: >>> >>> ???????????? ??? almost the same issue, the versio for openshoft release >>> ???????????? changed to 3.9 >>> >>> ???????????? ??? Failure summary: >>> >>> >>> ???????????? ??? ? 1. Hosts:? ? localhost >>> ???????????? ??? ? ? ?Play:? ? ?Determine openshift_version to configure >>> ???????????? on first >>> ???????????? ??? master >>> ???????????? ??? ? ? ?Task:? ? ?For an RPM install, abort when the >>> release >>> ???????????? ??? requested does >>> ???????????? ??? not match the available version. >>> ???????????? ??? ? ? ?Message:? You requested openshift_release 3.9, >>> ???????????? which is not >>> ???????????? ??? matched by >>> ???????????? ??? ? ? ? ? ? ? ? ?the latest OpenShift RPM we detected as >>> ???????????? origin-3.10.0 >>> ???????????? ??? ? ? ? ? ? ? ? ?on host localhost. >>> ???????????? ??? ? ? ? ? ? ? ? ?We will only install the latest RPMs, so >>> ???????????? please ensure >>> ???????????? ??? you are getting the release >>> ???????????? ??? ? ? ? ? ? ? ? ?you expect. You may need to adjust your >>> ???????????? Ansible >>> ???????????? ??? inventory, modify the repositories >>> ???????????? ??? ? ? ? ? ? ? ? ?available on the host, or run the >>> ???????????? appropriate OpenShift >>> ???????????? ??? upgrade playbook. >>> >>> >>> ???????????? What is the rpm version installed of OpenShift?origin? >>> ???????????? Do you perhaps have another repo that includes the >>> OpenShift >>> ???????????? origin-3.10.0? >>> >>> >>> ???????? origin is the upstream version of OpenShift, which is >>> unsupported. >>> >>> ???????? sudo repoquery -i origin >>> >>> ???????? This will tell you which repo it came from >>> >>> ???????? You will need to disable that repo and uninstall any packages >>> ???????? which came from that repo >>> >>> ???????? Another mystery is why it is trying to install origin in the >>> ???????? first place.? openshift-ansible with >>> ???????? openshift_deployment_type=openshift-enterprise should not >>> try to >>> ???????? install origin, it should install packages with names like >>> ???????? atomic-openshift-master, atomic-openshift-node, etc. >>> >>> >>> >>> >>> ???????????? ??? On 04/04/2018 14:18, Shirly Radco wrote: >>> ???????????? ??? > Adding Nicolas since he hit the same issue. >>> ???????????? ??? > >>> ???????????? ??? > -- >>> ???????????? ??? > >>> ???????????? ??? > SHIRLY?RADCO >>> ???????????? ??? > >>> ???????????? ??? > BI SeNIOR SOFTWARE ENGINEER >>> ???????????? ??? > >>> ???????????? ??? > Red Hat?Israel >>> ???????????? ??? > >>> ???????????? ??? > >>> ???????????? ??? > TRIED. TESTED. TRUSTED. >>> ???????????? ??? > >>> ???????????? ??? > >>> ???????????? ??? > On Wed, Apr 4, 2018 at 3:17 PM, Shirly Radco >>> ???????????? >>> ???????????? > >>> ???????????? ??? > >>> ???????????? >>> >>> wrote: >>> ???????????? ??? > >>> ???????????? ??? >? ? ?Hi Peter, >>> ???????????? ??? > >>> ???????????? ??? >? ? ?The installation instructions currently support >>> ???????????? OpenShift 3.6. >>> ???????????? ??? > >>> ???????????? ??? >? ? ?I'm now working on updating them to support 3.9. >>> ???????????? ??? > >>> ???????????? ??? >? ? ?You currently have 3.10 installed. >>> ???????????? ??? > >>> ???????????? ??? >? ? ?Please install OpenShift 3.9 using this >>> repository >>> ???????????? ??? > >>> ???????????? https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo >>> ???????????? >>> >>> ???????????? >> ???????????? >>> > >>> ???????????? ??? > >>> ???????????? >>> ?>> ???????????? >>> >>> ???????????? >> ???????????? >>> >> >>> ???????????? ??? > >>> ???????????? ??? >? ? ?And add the following file to your vm >>> ???????????? ??? > >>> ???????????? ??? >? ? ?Run: >>> ???????????? ??? >? ? ?vi /root/ansible-inventory-origin-39-aio >>> ???????????? ??? > >>> ???????????? ??? >? ? ?Add: >>> ???????????? ??? > >>> ???????????? ??? >? ? ?-------------- >>> ???????????? ??? >? ? ?[OSEv3:children] >>> ???????????? ??? >? ? ?nodes >>> ???????????? ??? >? ? ?masters >>> ???????????? ??? >? ? ?etcd >>> ???????????? ??? > >>> ???????????? ??? >? ? ?[OSEv3:vars] >>> ???????????? ??? >? ? ?ansible_connection=local >>> ???????????? ??? >? ? ?openshift_release=v3.9 >>> ???????????? ??? >? ? ?openshift_logging_install_logging=true >>> ???????????? ??? >? ? ?short_version=3.9 >>> ???????????? ??? >? ? ?openshift_deployment_type=origin >>> ???????????? ??? > >>> ???????????? ?openshift_master_identity_providers=[{'mappingMethod': >>> ???????????? 'lookup', >>> ???????????? ??? >? ? ?'challenge': 'true', 'login': 'true', 'kind': >>> ???????????? ??? >? ? ?'AllowAllPasswordIdentityProvider', 'name': >>> ???????????? 'allow_all'}] >>> ???????????? ??? >? ? ?# bug - doesn't use correct tag >>> ???????????? ??? >? ? ?openshift_logging_image_version=v3.9 >>> ???????????? ??? > >>> ???????????? ?openshift_logging_elasticsearch_proxy_image_version=v1.0.0 >>> ???????????? ??? > >>> ???????????? ??? >? ? ?openshift_logging_es_allow_external=True >>> ???????????? ??? >? ? ?openshift_logging_use_mux=True >>> ???????????? ??? >? ? ?openshift_logging_mux_allow_external=True >>> ???????????? ??? > >>> ?openshift_logging_mux_file_buffer_storage_type=hostmount >>> ???????????? ??? > >>> ?openshift_logging_elasticsearch_storage_type=hostmount >>> ???????????? ??? > >>> ???????????? >>> ?openshift_logging_elasticsearch_hostmount_path=/var/lib/elasticsearch >>> ???????????? ??? > >>> ???????????? ??? >? ? ?[nodes] >>> ???????????? ??? >? ? ?localhost storage=True >>> ???????????? openshift_node_labels="{'region': >>> ???????????? ??? 'infra'}" >>> ???????????? ??? >? ? ?openshift_schedulable=True >>> ???????????? ??? > >>> ???????????? ??? >? ? ?[masters] >>> ???????????? ??? >? ? ?localhost storage=True >>> ???????????? openshift_node_labels="{'region': >>> ???????????? ??? 'infra'}" >>> ???????????? ??? >? ? ?openshift_schedulable=True >>> ???????????? ??? > >>> ???????????? ??? >? ? ?[etcd] >>> ???????????? ??? >? ? ?localhost storage=True >>> ???????????? openshift_node_labels="{'region': >>> ???????????? ??? 'infra'}" >>> ???????????? ??? >? ? ?openshift_schedulable=True >>> ???????????? ??? > >>> ???????????? ??? > >>> ???????????? ??? >? ? ?------------ >>> ???????????? ??? > >>> ???????????? ??? >? ? ?Save and exit. >>> ???????????? ??? > >>> ???????????? ??? > >>> ???????????? ??? >? ? ?***Please make sure that you use /var as your >>> ???????????? Elasticsearch >>> ???????????? ??? >? ? ?persistent storage directory. >>> ???????????? ??? > >>> ???????????? ??? >? ? ?And when you run the OpenShift ansible >>> ???????????? ??? > >>> ???????????? >>> ?(https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible >>> >>> ???????????? >>> >>> >>> ???????????? >>> >> >>> ???????????? >>> > >>> >>> ???????????? ??? > >>> ???????????? >>> ?>> >>> ???????????? >>> >>> >>> ???????????? >>> >> >>> ???????????? >>> >>) >>> >>> ???????????? ??? >? ? ?use the file you just created like this: >>> ???????????? ??? > >>> ???????????? ??? >? ? ?# cd /usr/share/ansible/openshift-ansible >>> ???????????? ??? >? ? ?# (or wherever you cloned the git repo if >>> using git) >>> ???????????? ??? >? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log >>> ansible-playbook >>> ???????????? -vvv -e >>> ???????????? ??? >? ? ?@/root/vars.yaml -i >>> ???????????? /root/*ansible-inventory-origin-39-aio* >>> ???????????? ??? >? ? ?playbooks/byo/config.yml >>> ???????????? ??? > >>> ???????????? ??? >? ? ?Best regards, >>> ???????????? ??? > >>> ???????????? ??? >? ? ?-- >>> ???????????? ??? > >>> ???????????? ??? >? ? ?SHIRLY?RADCO >>> ???????????? ??? > >>> ???????????? ??? >? ? ?BI SeNIOR SOFTWARE ENGINEER >>> ???????????? ??? > >>> ???????????? ??? >? ? ?Red Hat?Israel >>> ???????????? ??? > >>> ???????????? ??? >? ? ? >>> ???????????? ??? >? ? ?TRIED. TESTED. TRUSTED. >>> >>> ???????????? ??? > >>> ???????????? ??? > >>> ???????????? ??? >? ? ?On Wed, Apr 4, 2018 at 12:17 PM, Peter Hudec >>> ???????????? >> ???????????? > >>> ???????????? ??? >? ? ? >>> ???????????? >>> wrote: >>> ???????????? ??? > >>> ???????????? ??? >? ? ? ? ?Tried to install ovirt metrics, but got error >>> ???????????? ??? > >>> ???????????? ??? >? ? ? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log >>> ???????????? ansible-playbook -vvv -e >>> ???????????? ??? >? ? ? ? ?@/root/vars.yaml -i >>> ???????????? /root/ansible-inventory-origin-37-aio >>> ???????????? ??? >? ? ? ? ?playbooks/byo/config.yml >>> ???????????? ??? > >>> ???????????? ??? >? ? ? ? ?? 1. Hosts:? ? localhost >>> ???????????? ??? >? ? ? ? ?? ? ?Play:? ? ?Determine openshift_version to >>> ???????????? configure >>> ???????????? ??? on first >>> ???????????? ??? >? ? ? ? ?master >>> ???????????? ??? >? ? ? ? ?? ? ?Task:? ? ?For an RPM install, abort when >>> ???????????? the release >>> ???????????? ??? >? ? ? ? ?requested does >>> ???????????? ??? >? ? ? ? ?not match the available version. >>> ???????????? ??? >? ? ? ? ?? ? ?Message:? You requested >>> openshift_release >>> ???????????? 3.7, >>> ???????????? ??? which is not >>> ???????????? ??? >? ? ? ? ?matched by >>> ???????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?the latest OpenShift RPM we >>> ???????????? detected as >>> ???????????? ??? origin-3.10.0 >>> ???????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?on host localhost. >>> ???????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?We will only install the >>> latest >>> ???????????? RPMs, so >>> ???????????? ??? please >>> ???????????? ??? >? ? ? ? ?ensure >>> ???????????? ??? >? ? ? ? ?you are getting the release >>> ???????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?you expect. You may need to >>> ???????????? adjust your >>> ???????????? ??? Ansible >>> ???????????? ??? >? ? ? ? ?inventory, modify the repositories >>> ???????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?available on the host, or run >>> ???????????? the appropriate >>> ???????????? ??? >? ? ? ? ?OpenShift >>> ???????????? ??? >? ? ? ? ?upgrade playbook. >>> ???????????? ??? > >>> ???????????? ??? >? ? ? ? ?? ? ? ? regards >>> ???????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ? Peter >>> ???????????? ??? > >>> ???????????? ??? > >>> ???????????? ??? >? ? ? ? ?On 04/04/2018 09:13, Fred Rolland wrote: >>> ???????????? ??? >? ? ? ? ?> Hi, >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> Check these links: >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> >>> ??????????????? ???????????? >>> https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ >>> ???????????? >>> >>> ???????????? >> ???????????? >>> > >>> ???????????? ??? > >>> ???????????? >>> ?>> ???????????? >>> >>> ???????????? >> ???????????? >>> >> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? >>> https://ovirt.org/develop/release-management/features/metrics/metrics-store/ >>> >>> ???????????? >>> >>> >>> ???????????? >>> >> >>> ???????????? >>> > >>> >>> ???????????? ??? > >>> ???????????? >>> ?>> >>> ???????????? >>> >>> >>> ???????????? >>> >> >>> ???????????? >>> >> >>> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> Regards, >>> ???????????? ??? >? ? ? ? ?> Fred >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> On Tue, Apr 3, 2018 at 9:38 AM, Anantha >>> Raghava >>> ???????????? ??? >? ? ? ? ?> >> ???????????? >>> ???????????? ??? >> ???????????? > >>> ???????????? ??? >? ? ? ? ?>> ???????????? >>> ???????????? ??? >> ???????????? >> >>> ???????????? ??? >? ? ? ? ?>> ???????????? >>> ???????????? ??? >> ???????????? > >>> ???????????? ??? >? ? ? ? ?>> ???????????? >>> ???????????? ??? >> ???????????? >>>> >>> ???????????? ??? >? ? ? ? ?> wrote: >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?>? ? ?Hi, >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?>? ? ?I see that oVirt DWH is installed with >>> ???????????? Version >>> ???????????? ??? 4.2.x. Now, how do I >>> ???????????? ??? >? ? ? ? ?>? ? ?take the reports? I version 3.5, we had >>> ???????????? Jasper >>> ???????????? ??? reports module using >>> ???????????? ??? >? ? ? ? ?>? ? ?which we could take utilization >>> reports. >>> ???????????? Can we do >>> ???????????? ??? something similar >>> ???????????? ??? >? ? ? ? ?>? ? ?here? >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?>? ? ?-- >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?>? ? ?Thanks & Regards, >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?>? ? ?Anantha Raghava >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?>? ? ?Do not print this e-mail unless >>> ???????????? required. Save >>> ???????????? ??? Paper & trees. >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> >>> ?_______________________________________________ >>> ???????????? ??? >? ? ? ? ?>? ? ?Users mailing list >>> ???????????? ??? >? ? ? ? ?> Users at ovirt.org >>> ???????????? > >>> ???????????? ??? >>> ???????????? >> >>> ???????????? ??? >? ? ? ? ?>> ???????????? >> ???????????? > >>> ???????????? ??? >>> ???????????? >>> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? http://lists.ovirt.org/mailman/listinfo/users >>> ???????????? >>> ???????????? ??? >> ???????????? > >>> ???????????? ??? > ?>> ???????????? >>> ???????????? ??? >> ???????????? >> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ?>> ???????????? >>> ???????????? ??? >> ???????????? > >>> ???????????? ??? > ?>> ???????????? >>> ???????????? >> ???????????? >>> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> >>> _______________________________________________ >>> ???????????? ??? >? ? ? ? ?> Users mailing list >>> ???????????? ??? >? ? ? ? ?> Users at ovirt.org >>> ???????????? > >>> ???????????? ??? >>> ???????????? >> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? http://lists.ovirt.org/mailman/listinfo/users >>> ???????????? >>> ???????????? ??? >> ???????????? > >>> ???????????? ??? > ?>> ???????????? >>> ???????????? ??? >> ???????????? >> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? > >>> ???????????? ??? > >>> ???????????? ??? >? ? ? ? ?-- >>> ???????????? ??? >? ? ? ? ?*Peter Hudec* >>> ???????????? ??? >? ? ? ? ?Infra?trukt?rny architekt >>> ???????????? ??? > phudec at cnc.sk >>> ???????????? > >>> ???????????? >>> ???????????? ??? >> >>> ???????????? >>> ???????????? > >>> ???????????? ??? >?????? ? >>> ???????????? >>> >>> ???????????? ??? > >>> ???????????? ??? >? ? ? ? ?*CNC,?a.s.* >>> ???????????? ??? >? ? ? ? ?Borsk? 6,?841 04 Bratislava >>> ???????????? ??? >? ? ? ? ?Recepcia:?+421 2? 35 000 100 >>> ???????????? ??? > >>> ???????????? ??? >? ? ? ? ?Mobil:+421?905 997 203 >>> ???????????? ??? >? ? ? ? ?*www.cnc.sk >>> ???????????? * >>> ???????????? ??? >>> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? > >>> ???????????? ??? >?????? >>> ?_______________________________________________ >>> ???????????? ??? >? ? ? ? ?Users mailing list >>> ???????????? ??? > Users at ovirt.org >>> ???????????? > >>> ???????????? >>> ???????????? ??? >> >>> ???????????? ??? > http://lists.ovirt.org/mailman/listinfo/users >>> ???????????? >>> ???????????? ??? >> ???????????? > >>> ???????????? ??? > ?>> ???????????? >>> ???????????? ??? >> ???????????? >> >>> ???????????? ??? > >>> ???????????? ??? > >>> ???????????? ??? > >>> >>> >>> ???????????? ??? -- >>> ???????????? ??? *Peter Hudec* >>> ???????????? ??? Infra?trukt?rny architekt >>> ???????????? ??? phudec at cnc.sk >>> ???????????? > >>> ???????????? >>> ???????????? ??? >> >>> >>> ???????????? ??? *CNC,?a.s.* >>> ???????????? ??? Borsk? 6,?841 04 Bratislava >>> ???????????? ??? Recepcia:?+421 2? 35 000 100 >>> >>> ???????????? ??? Mobil:+421?905 997 203 >>> ???????????? ??? *www.cnc.sk * >>> ???????????? >>> ???????????? ??? > >>> >>> >>> >>> >>> >> > -- *Peter Hudec* Infra?trukt?rny architekt phudec at cnc.sk *CNC,?a.s.* Borsk? 6,?841 04 Bratislava Recepcia:?+421 2? 35 000 100 Mobil:+421?905 997 203 *www.cnc.sk* From ykaul at redhat.com Thu Apr 5 16:57:47 2018 From: ykaul at redhat.com (Yaniv Kaul) Date: Thu, 05 Apr 2018 16:57:47 +0000 Subject: [ovirt-users] Why RAW images when using GlusterFS? In-Reply-To: <9b90c488-1a69-71e9-ffa5-cf4c80634d03@ecarnot.net> References: <9b90c488-1a69-71e9-ffa5-cf4c80634d03@ecarnot.net> Message-ID: On Thu, Apr 5, 2018, 2:33 PM Nicolas Ecarnot wrote: > Hello, > > Amongst others, I have one 3.6 DC working very well since years and all > based on GlusterFS. > When having a close look (qemu-img info) on the images, I see their > format is all RAW and not QCOW2. > Raw sparse. > I never noticed or bothered before, but I'm wondering : > - is it by design? > Yes, for performance reasons. - it is something we can change (I'd prefer qcow2) > No. - it there some limitations? > Not that I know. > And finally, I have the same questions about NFS storage domains. > Same as Gluster, and other file-based storage. Y. > Thank you. > > -- > Nicolas ECARNOT > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From ykaul at redhat.com Thu Apr 5 16:58:41 2018 From: ykaul at redhat.com (Yaniv Kaul) Date: Thu, 05 Apr 2018 16:58:41 +0000 Subject: [ovirt-users] Is compatibility level change required for upgrading from 4.0 to 4.2? In-Reply-To: References: Message-ID: On Thu, Apr 5, 2018, 5:31 PM Luca 'remix_tj' Lorenzetto < lorenzetto.luca at gmail.com> wrote: > Hello, > > we're planning an upgrade of an old 4.0 setup to 4.2, going through 4.1. > > What we found out is that when upgrading from major to major, cluster > and datacenter compatibility upgrade has to be done at the end of the > upgrade. > This means that we also require to restart our VMs for adapting the > compatibility level. > > Do we require to upgrade the compatibility level to 4.1 before > starting the upgrade to 4.2? > No. Y. > We have more than 400 vms and only few of them can be restarted at our > convenience. > > > -- > "E' assurdo impiegare gli uomini di intelligenza eccellente per fare > calcoli che potrebbero essere affidati a chiunque se si usassero delle > macchine" > Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716) > > "Internet ? la pi? grande biblioteca del mondo. > Ma il problema ? che i libri sono tutti sparsi sul pavimento" > John Allen Paulos, Matematico (1945-vivente) > > Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , < > lorenzetto.luca at gmail.com> > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jaymef at gmail.com Thu Apr 5 19:22:45 2018 From: jaymef at gmail.com (Jayme) Date: Thu, 5 Apr 2018 16:22:45 -0300 Subject: [ovirt-users] Hardware critique In-Reply-To: References: Message-ID: Thanks for your feedback. Any other opinions on this proposed setup? I'm very torn over using GlusterFS and what the expected performance may be, there seems to be little information out there. Would love to hear any feedback specifically from ovirt users on hyperconverged configurations. On Thu, Apr 5, 2018 at 2:56 AM, Alex K wrote: > Hi, > > You should be ok with the setup. > I am running around 20 vms (linux and windows, small and medium size) with > the half of your specs. With 10G network replica 3 is ok. > > Alex > > On Wed, Apr 4, 2018, 16:13 Jayme wrote: > >> I'm spec'ing hardware for a 3-node oVirt build (on somewhat of a >> budget). I plan to do 20-30 Linux VMs most of them very light weight + a >> couple of heavier hitting web and DB servers with frequent rsync backups. >> Some have a lot of small files from large github repos etc. >> >> 3X of the following: >> >> Dell PowerEdge R720 >> 2x 2.9 GHz 8 Core E5-2690 (SR0L0) >> 256GB RAM >> PERC H710 >> 2x10GB Nic >> >> Boot/OS will likely be two cheaper small sata/ssd in raid 1. >> >> Gluster bricks comprised of 4x2TB WD Gold 7200RPM SATA HDDs in RAID 10 >> per server. Using a replica 3 setup (and I'm thinking right now with no >> arbiter for extra redundancy, although I'm not sure what the performance >> hit may be as a result). Will this allow for two host failure or just one? >> >> I've been really struggling with storage choices, it seems very difficult >> to predict the performance of glusterFS due to the variance in hardware >> (everyone is using something different). I'm not sure if the performance >> will be adequate enough for my needs. >> >> I will be using an all ready existing Netgear XS716T 10GB switch for >> Gluster storage network. >> >> In addition I plan to build another simple glusterFS storage server that >> I can use to georeplicate the gluster volume to for DR purposes and use >> existing hardware to build an independent standby oVirt host that is able >> to start up a few high priority VMs from the georeplicated glusterFS volume >> if for some reason the primary oVirt cluster/glusterFS volume ever failed. >> >> I would love to hear any advice or critiques on this plan. >> >> Thanks! >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From vincent at epicenergy.ca Thu Apr 5 20:38:00 2018 From: vincent at epicenergy.ca (Vincent Royer) Date: Thu, 5 Apr 2018 13:38:00 -0700 Subject: [ovirt-users] Hardware critique In-Reply-To: References: Message-ID: Jayme, I'm doing a very similar build, the only difference really is I am using SSDs instead of HDDs. I have similar questions as you regarding expected performance. Have you considered JBOD + NFS? Putting a Gluster Replica 3 on top of RAID 10 arrays sounds very safe, but my gosh the capacity takes a massive hit. Am I correct in saying you will only get 4TB total usable capacity out of 24TB worth of disks? The cost per TB in that sort of scenario is immense. My plan is two 2TB SSDs per server in JBOD with a caching raid card, with replica 3. I would end up with the same 4TB total capacity using 12TB of SSDs. I think Replica 3 is safe enough that you could forgo the RAID 10. But I'm talking from zero experience... Would love others to chime in with their opinions on both these setups. *Vincent Royer* *778-825-1057* *SUSTAINABLE MOBILE ENERGY SOLUTIONS* On Thu, Apr 5, 2018 at 12:22 PM, Jayme wrote: > Thanks for your feedback. Any other opinions on this proposed setup? I'm > very torn over using GlusterFS and what the expected performance may be, > there seems to be little information out there. Would love to hear any > feedback specifically from ovirt users on hyperconverged configurations. > > On Thu, Apr 5, 2018 at 2:56 AM, Alex K wrote: > >> Hi, >> >> You should be ok with the setup. >> I am running around 20 vms (linux and windows, small and medium size) >> with the half of your specs. With 10G network replica 3 is ok. >> >> Alex >> >> On Wed, Apr 4, 2018, 16:13 Jayme wrote: >> >>> I'm spec'ing hardware for a 3-node oVirt build (on somewhat of a >>> budget). I plan to do 20-30 Linux VMs most of them very light weight + a >>> couple of heavier hitting web and DB servers with frequent rsync backups. >>> Some have a lot of small files from large github repos etc. >>> >>> 3X of the following: >>> >>> Dell PowerEdge R720 >>> 2x 2.9 GHz 8 Core E5-2690 (SR0L0) >>> 256GB RAM >>> PERC H710 >>> 2x10GB Nic >>> >>> Boot/OS will likely be two cheaper small sata/ssd in raid 1. >>> >>> Gluster bricks comprised of 4x2TB WD Gold 7200RPM SATA HDDs in RAID 10 >>> per server. Using a replica 3 setup (and I'm thinking right now with no >>> arbiter for extra redundancy, although I'm not sure what the performance >>> hit may be as a result). Will this allow for two host failure or just one? >>> >>> I've been really struggling with storage choices, it seems very >>> difficult to predict the performance of glusterFS due to the variance in >>> hardware (everyone is using something different). I'm not sure if the >>> performance will be adequate enough for my needs. >>> >>> I will be using an all ready existing Netgear XS716T 10GB switch for >>> Gluster storage network. >>> >>> In addition I plan to build another simple glusterFS storage server that >>> I can use to georeplicate the gluster volume to for DR purposes and use >>> existing hardware to build an independent standby oVirt host that is able >>> to start up a few high priority VMs from the georeplicated glusterFS volume >>> if for some reason the primary oVirt cluster/glusterFS volume ever failed. >>> >>> I would love to hear any advice or critiques on this plan. >>> >>> Thanks! >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >> > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From fernando.frediani at upx.com Thu Apr 5 20:50:07 2018 From: fernando.frediani at upx.com (FERNANDO FREDIANI) Date: Thu, 5 Apr 2018 17:50:07 -0300 Subject: [ovirt-users] Hardware critique In-Reply-To: References: Message-ID: I always found replica 3 a complete overkill. Don't know people made that up that was necessary. Just looks good and costs a lot with little benefit. Normally when using magnetic disks 2 copies are fine for most scenarios, but if using SSDs for similar scenarios depending on the configuration of each node disks it is possible to have a RAID 5/6 ish. Fernando 2018-04-05 17:38 GMT-03:00 Vincent Royer : > Jayme, > > I'm doing a very similar build, the only difference really is I am using > SSDs instead of HDDs. I have similar questions as you regarding expected > performance. Have you considered JBOD + NFS? Putting a Gluster Replica 3 > on top of RAID 10 arrays sounds very safe, but my gosh the capacity takes a > massive hit. Am I correct in saying you will only get 4TB total usable > capacity out of 24TB worth of disks? The cost per TB in that sort of > scenario is immense. > > My plan is two 2TB SSDs per server in JBOD with a caching raid card, with > replica 3. I would end up with the same 4TB total capacity using 12TB of > SSDs. > > I think Replica 3 is safe enough that you could forgo the RAID 10. But I'm > talking from zero experience... Would love others to chime in with their > opinions on both these setups. > > *Vincent Royer* > *778-825-1057* > > > > *SUSTAINABLE MOBILE ENERGY SOLUTIONS* > > > > > On Thu, Apr 5, 2018 at 12:22 PM, Jayme wrote: > >> Thanks for your feedback. Any other opinions on this proposed setup? >> I'm very torn over using GlusterFS and what the expected performance may >> be, there seems to be little information out there. Would love to hear any >> feedback specifically from ovirt users on hyperconverged configurations. >> >> On Thu, Apr 5, 2018 at 2:56 AM, Alex K wrote: >> >>> Hi, >>> >>> You should be ok with the setup. >>> I am running around 20 vms (linux and windows, small and medium size) >>> with the half of your specs. With 10G network replica 3 is ok. >>> >>> Alex >>> >>> On Wed, Apr 4, 2018, 16:13 Jayme wrote: >>> >>>> I'm spec'ing hardware for a 3-node oVirt build (on somewhat of a >>>> budget). I plan to do 20-30 Linux VMs most of them very light weight + a >>>> couple of heavier hitting web and DB servers with frequent rsync backups. >>>> Some have a lot of small files from large github repos etc. >>>> >>>> 3X of the following: >>>> >>>> Dell PowerEdge R720 >>>> 2x 2.9 GHz 8 Core E5-2690 (SR0L0) >>>> 256GB RAM >>>> PERC H710 >>>> 2x10GB Nic >>>> >>>> Boot/OS will likely be two cheaper small sata/ssd in raid 1. >>>> >>>> Gluster bricks comprised of 4x2TB WD Gold 7200RPM SATA HDDs in RAID 10 >>>> per server. Using a replica 3 setup (and I'm thinking right now with no >>>> arbiter for extra redundancy, although I'm not sure what the performance >>>> hit may be as a result). Will this allow for two host failure or just one? >>>> >>>> I've been really struggling with storage choices, it seems very >>>> difficult to predict the performance of glusterFS due to the variance in >>>> hardware (everyone is using something different). I'm not sure if the >>>> performance will be adequate enough for my needs. >>>> >>>> I will be using an all ready existing Netgear XS716T 10GB switch for >>>> Gluster storage network. >>>> >>>> In addition I plan to build another simple glusterFS storage server >>>> that I can use to georeplicate the gluster volume to for DR purposes and >>>> use existing hardware to build an independent standby oVirt host that is >>>> able to start up a few high priority VMs from the georeplicated glusterFS >>>> volume if for some reason the primary oVirt cluster/glusterFS volume ever >>>> failed. >>>> >>>> I would love to hear any advice or critiques on this plan. >>>> >>>> Thanks! >>>> _______________________________________________ >>>> Users mailing list >>>> Users at ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>> >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jaymef at gmail.com Thu Apr 5 21:38:44 2018 From: jaymef at gmail.com (Jayme) Date: Thu, 5 Apr 2018 18:38:44 -0300 Subject: [ovirt-users] Hardware critique In-Reply-To: References: Message-ID: Vincent, I've been back and forth on SSDs vs HDDs and can't really get a clear answer. You are correct though, it would only equal 4TB usable in the end which is pretty crazy but that amount of 7200 RPM HDDs equals about the same cost as 3 2TB ssds would. I actually posted a question to this list not long ago asking how GlusterFS might perform with a small amount of disks such as one 2TB SSD per host and some glusterFS users commented stating that network would be the bottleneck long before the disks and a small amount of SSDs could bottleneck at RPC layer. Also, I believe at this time GlusterFS is not exactly developed to take full advantage of SSDs (but I believe there has been strides being made in that regard, I could be wrong here). As for replica 3 being overkill that may be true as well but from what I've read on Ovirt and GlusterFS list archives people typically feel safer with replica 3 and run in to less disaster scenarios and can provide easier recovery. I'm not sold on Replica 3 either, Rep 3 Arbiter 1 may be more than fine but I wanted to err on the side of caution as this setup may host production servers sometime in the future. I really wish I could get some straight answers on best configuration for Ovirt + GlusterFS but thus far it has been a big question mark. I don't know if Raid is better than JBOD and I don't know if a smaller number of SSDs would perform any better/worse than larger number of spinning disks in raid 10. On Thu, Apr 5, 2018 at 5:38 PM, Vincent Royer wrote: > Jayme, > > I'm doing a very similar build, the only difference really is I am using > SSDs instead of HDDs. I have similar questions as you regarding expected > performance. Have you considered JBOD + NFS? Putting a Gluster Replica 3 > on top of RAID 10 arrays sounds very safe, but my gosh the capacity takes a > massive hit. Am I correct in saying you will only get 4TB total usable > capacity out of 24TB worth of disks? The cost per TB in that sort of > scenario is immense. > > My plan is two 2TB SSDs per server in JBOD with a caching raid card, with > replica 3. I would end up with the same 4TB total capacity using 12TB of > SSDs. > > I think Replica 3 is safe enough that you could forgo the RAID 10. But I'm > talking from zero experience... Would love others to chime in with their > opinions on both these setups. > > *Vincent Royer* > *778-825-1057* > > > > *SUSTAINABLE MOBILE ENERGY SOLUTIONS* > > > > > On Thu, Apr 5, 2018 at 12:22 PM, Jayme wrote: > >> Thanks for your feedback. Any other opinions on this proposed setup? >> I'm very torn over using GlusterFS and what the expected performance may >> be, there seems to be little information out there. Would love to hear any >> feedback specifically from ovirt users on hyperconverged configurations. >> >> On Thu, Apr 5, 2018 at 2:56 AM, Alex K wrote: >> >>> Hi, >>> >>> You should be ok with the setup. >>> I am running around 20 vms (linux and windows, small and medium size) >>> with the half of your specs. With 10G network replica 3 is ok. >>> >>> Alex >>> >>> On Wed, Apr 4, 2018, 16:13 Jayme wrote: >>> >>>> I'm spec'ing hardware for a 3-node oVirt build (on somewhat of a >>>> budget). I plan to do 20-30 Linux VMs most of them very light weight + a >>>> couple of heavier hitting web and DB servers with frequent rsync backups. >>>> Some have a lot of small files from large github repos etc. >>>> >>>> 3X of the following: >>>> >>>> Dell PowerEdge R720 >>>> 2x 2.9 GHz 8 Core E5-2690 (SR0L0) >>>> 256GB RAM >>>> PERC H710 >>>> 2x10GB Nic >>>> >>>> Boot/OS will likely be two cheaper small sata/ssd in raid 1. >>>> >>>> Gluster bricks comprised of 4x2TB WD Gold 7200RPM SATA HDDs in RAID 10 >>>> per server. Using a replica 3 setup (and I'm thinking right now with no >>>> arbiter for extra redundancy, although I'm not sure what the performance >>>> hit may be as a result). Will this allow for two host failure or just one? >>>> >>>> I've been really struggling with storage choices, it seems very >>>> difficult to predict the performance of glusterFS due to the variance in >>>> hardware (everyone is using something different). I'm not sure if the >>>> performance will be adequate enough for my needs. >>>> >>>> I will be using an all ready existing Netgear XS716T 10GB switch for >>>> Gluster storage network. >>>> >>>> In addition I plan to build another simple glusterFS storage server >>>> that I can use to georeplicate the gluster volume to for DR purposes and >>>> use existing hardware to build an independent standby oVirt host that is >>>> able to start up a few high priority VMs from the georeplicated glusterFS >>>> volume if for some reason the primary oVirt cluster/glusterFS volume ever >>>> failed. >>>> >>>> I would love to hear any advice or critiques on this plan. >>>> >>>> Thanks! >>>> _______________________________________________ >>>> Users mailing list >>>> Users at ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>> >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From clint at theboggios.com Fri Apr 6 00:58:37 2018 From: clint at theboggios.com (Clint Boggio) Date: Thu, 5 Apr 2018 19:58:37 -0500 Subject: [ovirt-users] Greetings oVirt Users Message-ID: Environment Rundown: OVirt 4.2 6 CentOS 7.4 Compute Nodes Intel Xeon 1 CentOS 7.4 Dedicated Engine Node Intel Xeon 1 Datacenter 1 Storage Domain 1 Cluster 10Gig-E iSCSI Storage 10Gig-E NFS Export Domain 20 VM?s of various OS?s and uses The current cluster is using the Nehalem architecture. I?ve got the deploy two new VMs that the current system will not allow me to configure with the Nehalem based cluster, so I?ve got to bump up the architecture of the cluster to accommodate them. Before i shut down all the current VMs to upgrade the cluster, I have some questions about the effect this is going to have on the environment. 1. Will all of the current VM?s use the legacy processor architecture or will I have to change them ? 2. Can I elevate the cluster processor functionality higher than the underlying hardware architecture ? 3. In regards to the new cluster processor, will all of the processor architectures below the one I choose be an option for the existing and future VMs ? I apologize for the long post and I hope that I haven?t left out any vital information. From vincent at epicenergy.ca Fri Apr 6 01:16:43 2018 From: vincent at epicenergy.ca (Vincent Royer) Date: Fri, 06 Apr 2018 01:16:43 +0000 Subject: [ovirt-users] Hardware critique In-Reply-To: References: Message-ID: Well good, we can at least bounce ideas off each other, and I'm sure we'll get some good advice sooner or later! Best way to get good ideas on the internet is to post bad ones and wait ;) In the performance and sizing guide PDF, they make this statement: *Standard servers with 4:2 erasure coding and JBOD bricks provide superior value in terms of throughput * *per server cost.* I don't know enough about erasure coding to know if that applies, but all the graphs that involve JBOD in that document look pretty good to me. What do you know about ZFS? Seems to be popular to use it in combination with Gluster. On Thu, Apr 5, 2018, 2:38 PM Jayme, wrote: > Vincent, > > I've been back and forth on SSDs vs HDDs and can't really get a clear > answer. You are correct though, it would only equal 4TB usable in the end > which is pretty crazy but that amount of 7200 RPM HDDs equals about the > same cost as 3 2TB ssds would. I actually posted a question to this list > not long ago asking how GlusterFS might perform with a small amount of > disks such as one 2TB SSD per host and some glusterFS users commented > stating that network would be the bottleneck long before the disks and a > small amount of SSDs could bottleneck at RPC layer. Also, I believe at > this time GlusterFS is not exactly developed to take full advantage of SSDs > (but I believe there has been strides being made in that regard, I could be > wrong here). > > As for replica 3 being overkill that may be true as well but from what > I've read on Ovirt and GlusterFS list archives people typically feel safer > with replica 3 and run in to less disaster scenarios and can provide easier > recovery. I'm not sold on Replica 3 either, Rep 3 Arbiter 1 may be more > than fine but I wanted to err on the side of caution as this setup may host > production servers sometime in the future. > > I really wish I could get some straight answers on best configuration for > Ovirt + GlusterFS but thus far it has been a big question mark. I don't > know if Raid is better than JBOD and I don't know if a smaller number of > SSDs would perform any better/worse than larger number of spinning disks in > raid 10. > > On Thu, Apr 5, 2018 at 5:38 PM, Vincent Royer > wrote: > >> Jayme, >> >> I'm doing a very similar build, the only difference really is I am using >> SSDs instead of HDDs. I have similar questions as you regarding expected >> performance. Have you considered JBOD + NFS? Putting a Gluster Replica 3 >> on top of RAID 10 arrays sounds very safe, but my gosh the capacity takes a >> massive hit. Am I correct in saying you will only get 4TB total usable >> capacity out of 24TB worth of disks? The cost per TB in that sort of >> scenario is immense. >> >> My plan is two 2TB SSDs per server in JBOD with a caching raid card, with >> replica 3. I would end up with the same 4TB total capacity using 12TB of >> SSDs. >> >> I think Replica 3 is safe enough that you could forgo the RAID 10. But >> I'm talking from zero experience... Would love others to chime in with >> their opinions on both these setups. >> >> *Vincent Royer* >> *778-825-1057* >> >> >> >> *SUSTAINABLE MOBILE ENERGY SOLUTIONS* >> >> >> >> >> On Thu, Apr 5, 2018 at 12:22 PM, Jayme wrote: >> >>> Thanks for your feedback. Any other opinions on this proposed setup? >>> I'm very torn over using GlusterFS and what the expected performance may >>> be, there seems to be little information out there. Would love to hear any >>> feedback specifically from ovirt users on hyperconverged configurations. >>> >>> On Thu, Apr 5, 2018 at 2:56 AM, Alex K wrote: >>> >>>> Hi, >>>> >>>> You should be ok with the setup. >>>> I am running around 20 vms (linux and windows, small and medium size) >>>> with the half of your specs. With 10G network replica 3 is ok. >>>> >>>> Alex >>>> >>>> On Wed, Apr 4, 2018, 16:13 Jayme wrote: >>>> >>>>> I'm spec'ing hardware for a 3-node oVirt build (on somewhat of a >>>>> budget). I plan to do 20-30 Linux VMs most of them very light weight + a >>>>> couple of heavier hitting web and DB servers with frequent rsync backups. >>>>> Some have a lot of small files from large github repos etc. >>>>> >>>>> 3X of the following: >>>>> >>>>> Dell PowerEdge R720 >>>>> 2x 2.9 GHz 8 Core E5-2690 (SR0L0) >>>>> 256GB RAM >>>>> PERC H710 >>>>> 2x10GB Nic >>>>> >>>>> Boot/OS will likely be two cheaper small sata/ssd in raid 1. >>>>> >>>>> Gluster bricks comprised of 4x2TB WD Gold 7200RPM SATA HDDs in RAID 10 >>>>> per server. Using a replica 3 setup (and I'm thinking right now with no >>>>> arbiter for extra redundancy, although I'm not sure what the performance >>>>> hit may be as a result). Will this allow for two host failure or just one? >>>>> >>>>> I've been really struggling with storage choices, it seems very >>>>> difficult to predict the performance of glusterFS due to the variance in >>>>> hardware (everyone is using something different). I'm not sure if the >>>>> performance will be adequate enough for my needs. >>>>> >>>>> I will be using an all ready existing Netgear XS716T 10GB switch for >>>>> Gluster storage network. >>>>> >>>>> In addition I plan to build another simple glusterFS storage server >>>>> that I can use to georeplicate the gluster volume to for DR purposes and >>>>> use existing hardware to build an independent standby oVirt host that is >>>>> able to start up a few high priority VMs from the georeplicated glusterFS >>>>> volume if for some reason the primary oVirt cluster/glusterFS volume ever >>>>> failed. >>>>> >>>>> I would love to hear any advice or critiques on this plan. >>>>> >>>>> Thanks! >>>>> _______________________________________________ >>>>> Users mailing list >>>>> Users at ovirt.org >>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>> >>>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From stefan.wendler at tngtech.com Fri Apr 6 06:13:23 2018 From: stefan.wendler at tngtech.com (Stefan Wendler) Date: Fri, 6 Apr 2018 08:13:23 +0200 Subject: [ovirt-users] External Provider https (unknown error) In-Reply-To: <23bb44c6-6014-2d24-5b2f-22b7f6f41ed9@tngtech.com> References: <23bb44c6-6014-2d24-5b2f-22b7f6f41ed9@tngtech.com> Message-ID: Bump Does nobody have any idea? On 04/04/2018 13:29, Stefan Wendler wrote: > Hi, > > I am currently trying to attach Glance (OpenStack Image) and Cinder > (OpenStack Volume) as external provider and am facing a problem when > trying to use https in the Provider-URL on an ovirt 3.6 and 4.1 cluster. > > The Provider-URL I am using is in the form: > https://:9292 (or port 8776 for Cinder - is either a fqdn > or an IP-Address) > > Whenever I press the "Test" button in the "Add Provider" dialog I get > the message "Test Failed (unknown error)." There is no entry in any > logfile whatsoever (at least not in any logs that are associated with > ovirt). I would expect an ssl cert dialog here. I can telnet to the > destination ports from the engine and the nodes so Clance and Cinder are > reachable > > I have also read that this might happen, if there is a corrupted > /var/lib/ovirt-engine/external_truststore > But this file is not even existing and when i create it by hand, it is > not touched. > > How can I get this to work or even get an error message that gives me a > hint where to look? > > Thanks for your support, > Stefan > > > > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > From jvdwege at xs4all.nl Fri Apr 6 08:35:03 2018 From: jvdwege at xs4all.nl (Joop) Date: Fri, 6 Apr 2018 10:35:03 +0200 Subject: [ovirt-users] Greetings oVirt Users In-Reply-To: References: Message-ID: <5AC73137.5070809@xs4all.nl> On 6-4-2018 02:58, Clint Boggio wrote: > Environment Rundown: > > OVirt 4.2 > 6 CentOS 7.4 Compute Nodes Intel Xeon > 1 CentOS 7.4 Dedicated Engine Node Intel Xeon > 1 Datacenter > 1 Storage Domain > 1 Cluster > 10Gig-E iSCSI Storage > 10Gig-E NFS Export Domain > 20 VM?s of various OS?s and uses > > The current cluster is using the Nehalem architecture. > > I?ve got the deploy two new VMs that the current system will not allow me to configure with the Nehalem based cluster, so I?ve got to bump up the architecture of the cluster to accommodate them. > > Before i shut down all the current VMs to upgrade the cluster, I have some questions about the effect this is going to have on the environment. > > 1. Will all of the current VM?s use the legacy processor architecture or will I have to change them ? They can keep the legacy architecture. The level is determined by the server with the lowest specs qua architecture but since it is a cluster property you can add 1 or 2 new servers in a new cluster which you could use to run the new VMs. So if all your servers are Nehalem than you'll need at least one new server. > > 2. Can I elevate the cluster processor functionality higher than the underlying hardware architecture ? No > > 3. In regards to the new cluster processor, will all of the processor architectures below the one I choose be an option for the existing and future VMs ? Yes. > > I apologize for the long post and I hope that I haven?t left out any vital information. > Joop From ykaul at redhat.com Fri Apr 6 08:58:10 2018 From: ykaul at redhat.com (Yaniv Kaul) Date: Fri, 06 Apr 2018 08:58:10 +0000 Subject: [ovirt-users] Hardware critique In-Reply-To: References: Message-ID: On Thu, Apr 5, 2018, 11:51 PM FERNANDO FREDIANI wrote: > I always found replica 3 a complete overkill. Don't know people made that > up that was necessary. Just looks good and costs a lot with little benefit. > It's not very easy to solve split brain with only 2. You can use 2+arbiter. Y. > Normally when using magnetic disks 2 copies are fine for most scenarios, > but if using SSDs for similar scenarios depending on the configuration of > each node disks it is possible to have a RAID 5/6 ish. > Fernando > > 2018-04-05 17:38 GMT-03:00 Vincent Royer : > >> Jayme, >> >> I'm doing a very similar build, the only difference really is I am using >> SSDs instead of HDDs. I have similar questions as you regarding expected >> performance. Have you considered JBOD + NFS? Putting a Gluster Replica 3 >> on top of RAID 10 arrays sounds very safe, but my gosh the capacity takes a >> massive hit. Am I correct in saying you will only get 4TB total usable >> capacity out of 24TB worth of disks? The cost per TB in that sort of >> scenario is immense. >> >> My plan is two 2TB SSDs per server in JBOD with a caching raid card, with >> replica 3. I would end up with the same 4TB total capacity using 12TB of >> SSDs. >> >> I think Replica 3 is safe enough that you could forgo the RAID 10. But >> I'm talking from zero experience... Would love others to chime in with >> their opinions on both these setups. >> >> *Vincent Royer* >> *778-825-1057* >> >> >> >> *SUSTAINABLE MOBILE ENERGY SOLUTIONS* >> >> >> >> >> On Thu, Apr 5, 2018 at 12:22 PM, Jayme wrote: >> >>> Thanks for your feedback. Any other opinions on this proposed setup? >>> I'm very torn over using GlusterFS and what the expected performance may >>> be, there seems to be little information out there. Would love to hear any >>> feedback specifically from ovirt users on hyperconverged configurations. >>> >>> On Thu, Apr 5, 2018 at 2:56 AM, Alex K wrote: >>> >>>> Hi, >>>> >>>> You should be ok with the setup. >>>> I am running around 20 vms (linux and windows, small and medium size) >>>> with the half of your specs. With 10G network replica 3 is ok. >>>> >>>> Alex >>>> >>>> On Wed, Apr 4, 2018, 16:13 Jayme wrote: >>>> >>>>> I'm spec'ing hardware for a 3-node oVirt build (on somewhat of a >>>>> budget). I plan to do 20-30 Linux VMs most of them very light weight + a >>>>> couple of heavier hitting web and DB servers with frequent rsync backups. >>>>> Some have a lot of small files from large github repos etc. >>>>> >>>>> 3X of the following: >>>>> >>>>> Dell PowerEdge R720 >>>>> 2x 2.9 GHz 8 Core E5-2690 (SR0L0) >>>>> 256GB RAM >>>>> PERC H710 >>>>> 2x10GB Nic >>>>> >>>>> Boot/OS will likely be two cheaper small sata/ssd in raid 1. >>>>> >>>>> Gluster bricks comprised of 4x2TB WD Gold 7200RPM SATA HDDs in RAID 10 >>>>> per server. Using a replica 3 setup (and I'm thinking right now with no >>>>> arbiter for extra redundancy, although I'm not sure what the performance >>>>> hit may be as a result). Will this allow for two host failure or just one? >>>>> >>>>> I've been really struggling with storage choices, it seems very >>>>> difficult to predict the performance of glusterFS due to the variance in >>>>> hardware (everyone is using something different). I'm not sure if the >>>>> performance will be adequate enough for my needs. >>>>> >>>>> I will be using an all ready existing Netgear XS716T 10GB switch for >>>>> Gluster storage network. >>>>> >>>>> In addition I plan to build another simple glusterFS storage server >>>>> that I can use to georeplicate the gluster volume to for DR purposes and >>>>> use existing hardware to build an independent standby oVirt host that is >>>>> able to start up a few high priority VMs from the georeplicated glusterFS >>>>> volume if for some reason the primary oVirt cluster/glusterFS volume ever >>>>> failed. >>>>> >>>>> I would love to hear any advice or critiques on this plan. >>>>> >>>>> Thanks! >>>>> _______________________________________________ >>>>> Users mailing list >>>>> Users at ovirt.org >>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>> >>>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From ykaul at redhat.com Fri Apr 6 09:03:29 2018 From: ykaul at redhat.com (Yaniv Kaul) Date: Fri, 06 Apr 2018 09:03:29 +0000 Subject: [ovirt-users] Hardware critique In-Reply-To: References: Message-ID: On Fri, Apr 6, 2018, 12:39 AM Jayme wrote: > Vincent, > > I've been back and forth on SSDs vs HDDs and can't really get a clear > answer. You are correct though, it would only equal 4TB usable in the end > which is pretty crazy but that amount of 7200 RPM HDDs equals about the > same cost as 3 2TB ssds would. I actually posted a question to this list > not long ago asking how GlusterFS might perform with a small amount of > disks such as one 2TB SSD per host and some glusterFS users commented > stating that network would be the bottleneck long before the disks and a > small amount of SSDs could bottleneck at RPC layer. Also, I believe at > this time GlusterFS is not exactly developed to take full advantage of SSDs > (but I believe there has been strides being made in that regard, I could be > wrong here). > Coming real soon now are some very cool features that will make decisions somewhat harder: dedup+compression (from VDO) and lvmcache setup. > As for replica 3 being overkill that may be true as well but from what > I've read on Ovirt and GlusterFS list archives people typically feel safer > with replica 3 and run in to less disaster scenarios and can provide easier > recovery. I'm not sold on Replica 3 either, Rep 3 Arbiter 1 may be more > than fine but I wanted to err on the side of caution as this setup may host > production servers sometime in the future. > > I really wish I could get some straight answers on best configuration for > Ovirt + GlusterFS but thus far it has been a big question mark. I don't > know if Raid is better than JBOD and I don't know if a smaller number of > SSDs would perform any better/worse than larger number of spinning disks in > raid 10. > RAID is better than JBOD in terms of availability and most likely performance. It's also more expensive and requires initial setup. SSD will perform better than HDD. It's also more expensive than HDD. No one but you can provide what works best for your requirements. Y. > On Thu, Apr 5, 2018 at 5:38 PM, Vincent Royer > wrote: > >> Jayme, >> >> I'm doing a very similar build, the only difference really is I am using >> SSDs instead of HDDs. I have similar questions as you regarding expected >> performance. Have you considered JBOD + NFS? Putting a Gluster Replica 3 >> on top of RAID 10 arrays sounds very safe, but my gosh the capacity takes a >> massive hit. Am I correct in saying you will only get 4TB total usable >> capacity out of 24TB worth of disks? The cost per TB in that sort of >> scenario is immense. >> >> My plan is two 2TB SSDs per server in JBOD with a caching raid card, with >> replica 3. I would end up with the same 4TB total capacity using 12TB of >> SSDs. >> >> I think Replica 3 is safe enough that you could forgo the RAID 10. But >> I'm talking from zero experience... Would love others to chime in with >> their opinions on both these setups. >> >> *Vincent Royer* >> *778-825-1057* >> >> >> >> *SUSTAINABLE MOBILE ENERGY SOLUTIONS* >> >> >> >> >> On Thu, Apr 5, 2018 at 12:22 PM, Jayme wrote: >> >>> Thanks for your feedback. Any other opinions on this proposed setup? >>> I'm very torn over using GlusterFS and what the expected performance may >>> be, there seems to be little information out there. Would love to hear any >>> feedback specifically from ovirt users on hyperconverged configurations. >>> >>> On Thu, Apr 5, 2018 at 2:56 AM, Alex K wrote: >>> >>>> Hi, >>>> >>>> You should be ok with the setup. >>>> I am running around 20 vms (linux and windows, small and medium size) >>>> with the half of your specs. With 10G network replica 3 is ok. >>>> >>>> Alex >>>> >>>> On Wed, Apr 4, 2018, 16:13 Jayme wrote: >>>> >>>>> I'm spec'ing hardware for a 3-node oVirt build (on somewhat of a >>>>> budget). I plan to do 20-30 Linux VMs most of them very light weight + a >>>>> couple of heavier hitting web and DB servers with frequent rsync backups. >>>>> Some have a lot of small files from large github repos etc. >>>>> >>>>> 3X of the following: >>>>> >>>>> Dell PowerEdge R720 >>>>> 2x 2.9 GHz 8 Core E5-2690 (SR0L0) >>>>> 256GB RAM >>>>> PERC H710 >>>>> 2x10GB Nic >>>>> >>>>> Boot/OS will likely be two cheaper small sata/ssd in raid 1. >>>>> >>>>> Gluster bricks comprised of 4x2TB WD Gold 7200RPM SATA HDDs in RAID 10 >>>>> per server. Using a replica 3 setup (and I'm thinking right now with no >>>>> arbiter for extra redundancy, although I'm not sure what the performance >>>>> hit may be as a result). Will this allow for two host failure or just one? >>>>> >>>>> I've been really struggling with storage choices, it seems very >>>>> difficult to predict the performance of glusterFS due to the variance in >>>>> hardware (everyone is using something different). I'm not sure if the >>>>> performance will be adequate enough for my needs. >>>>> >>>>> I will be using an all ready existing Netgear XS716T 10GB switch for >>>>> Gluster storage network. >>>>> >>>>> In addition I plan to build another simple glusterFS storage server >>>>> that I can use to georeplicate the gluster volume to for DR purposes and >>>>> use existing hardware to build an independent standby oVirt host that is >>>>> able to start up a few high priority VMs from the georeplicated glusterFS >>>>> volume if for some reason the primary oVirt cluster/glusterFS volume ever >>>>> failed. >>>>> >>>>> I would love to hear any advice or critiques on this plan. >>>>> >>>>> Thanks! >>>>> _______________________________________________ >>>>> Users mailing list >>>>> Users at ovirt.org >>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>> >>>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >> > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From ykaul at redhat.com Fri Apr 6 09:05:25 2018 From: ykaul at redhat.com (Yaniv Kaul) Date: Fri, 06 Apr 2018 09:05:25 +0000 Subject: [ovirt-users] Hardware critique In-Reply-To: References: Message-ID: On Thu, Apr 5, 2018, 11:39 PM Vincent Royer wrote: > Jayme, > > I'm doing a very similar build, the only difference really is I am using > SSDs instead of HDDs. I have similar questions as you regarding expected > performance. Have you considered JBOD + NFS? Putting a Gluster Replica 3 > on top of RAID 10 arrays sounds very safe, but my gosh the capacity takes a > massive hit. Am I correct in saying you will only get 4TB total usable > capacity out of 24TB worth of disks? The cost per TB in that sort of > scenario is immense. > > My plan is two 2TB SSDs per server in JBOD with a caching raid card, with > replica 3. I would end up with the same 4TB total capacity using 12TB of > SSDs. > I'm not sure I see the value in RAID card if you don't use RAID and I'm not sure you really need caching on the card. Y. > I think Replica 3 is safe enough that you could forgo the RAID 10. But I'm > talking from zero experience... Would love others to chime in with their > opinions on both these setups. > > *Vincent Royer* > *778-825-1057* > > > > *SUSTAINABLE MOBILE ENERGY SOLUTIONS* > > > > > On Thu, Apr 5, 2018 at 12:22 PM, Jayme wrote: > >> Thanks for your feedback. Any other opinions on this proposed setup? >> I'm very torn over using GlusterFS and what the expected performance may >> be, there seems to be little information out there. Would love to hear any >> feedback specifically from ovirt users on hyperconverged configurations. >> >> On Thu, Apr 5, 2018 at 2:56 AM, Alex K wrote: >> >>> Hi, >>> >>> You should be ok with the setup. >>> I am running around 20 vms (linux and windows, small and medium size) >>> with the half of your specs. With 10G network replica 3 is ok. >>> >>> Alex >>> >>> On Wed, Apr 4, 2018, 16:13 Jayme wrote: >>> >>>> I'm spec'ing hardware for a 3-node oVirt build (on somewhat of a >>>> budget). I plan to do 20-30 Linux VMs most of them very light weight + a >>>> couple of heavier hitting web and DB servers with frequent rsync backups. >>>> Some have a lot of small files from large github repos etc. >>>> >>>> 3X of the following: >>>> >>>> Dell PowerEdge R720 >>>> 2x 2.9 GHz 8 Core E5-2690 (SR0L0) >>>> 256GB RAM >>>> PERC H710 >>>> 2x10GB Nic >>>> >>>> Boot/OS will likely be two cheaper small sata/ssd in raid 1. >>>> >>>> Gluster bricks comprised of 4x2TB WD Gold 7200RPM SATA HDDs in RAID 10 >>>> per server. Using a replica 3 setup (and I'm thinking right now with no >>>> arbiter for extra redundancy, although I'm not sure what the performance >>>> hit may be as a result). Will this allow for two host failure or just one? >>>> >>>> I've been really struggling with storage choices, it seems very >>>> difficult to predict the performance of glusterFS due to the variance in >>>> hardware (everyone is using something different). I'm not sure if the >>>> performance will be adequate enough for my needs. >>>> >>>> I will be using an all ready existing Netgear XS716T 10GB switch for >>>> Gluster storage network. >>>> >>>> In addition I plan to build another simple glusterFS storage server >>>> that I can use to georeplicate the gluster volume to for DR purposes and >>>> use existing hardware to build an independent standby oVirt host that is >>>> able to start up a few high priority VMs from the georeplicated glusterFS >>>> volume if for some reason the primary oVirt cluster/glusterFS volume ever >>>> failed. >>>> >>>> I would love to hear any advice or critiques on this plan. >>>> >>>> Thanks! >>>> _______________________________________________ >>>> Users mailing list >>>> Users at ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>> >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From michal.skrivanek at redhat.com Fri Apr 6 09:05:33 2018 From: michal.skrivanek at redhat.com (Michal Skrivanek) Date: Fri, 6 Apr 2018 11:05:33 +0200 Subject: [ovirt-users] Is compatibility level change required for upgrading from 4.0 to 4.2? In-Reply-To: References: Message-ID: <8B60E182-D79F-4BAD-824C-D700B1E36593@redhat.com> > On 5 Apr 2018, at 18:58, Yaniv Kaul wrote: > > > > On Thu, Apr 5, 2018, 5:31 PM Luca 'remix_tj' Lorenzetto > wrote: > Hello, > > we're planning an upgrade of an old 4.0 setup to 4.2, going through 4.1. > > What we found out is that when upgrading from major to major, cluster > and datacenter compatibility upgrade has to be done at the end of the > upgrade. > This means that we also require to restart our VMs for adapting the > compatibility level. > > Do we require to upgrade the compatibility level to 4.1 before > starting the upgrade to 4.2? > > No. you just need to keep the supported versions in mind. Version 4.2 supports Cluster levels 3.6, 4.0, 4.1(same as version 4.1) - so any of them is ok > Y. > > > We have more than 400 vms and only few of them can be restarted at our > convenience. > > > -- > "E' assurdo impiegare gli uomini di intelligenza eccellente per fare > calcoli che potrebbero essere affidati a chiunque se si usassero delle > macchine" > Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716) > > "Internet ? la pi? grande biblioteca del mondo. > Ma il problema ? che i libri sono tutti sparsi sul pavimento" > John Allen Paulos, Matematico (1945-vivente) > > Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users -------------- next part -------------- An HTML attachment was scrubbed... URL: From michal.skrivanek at redhat.com Fri Apr 6 09:11:18 2018 From: michal.skrivanek at redhat.com (Michal Skrivanek) Date: Fri, 6 Apr 2018 11:11:18 +0200 Subject: [ovirt-users] Decrease downtime for HA In-Reply-To: <70878a1e-04f1-8241-b2d8-d9474893538b@hhi.fraunhofer.de> References: <70878a1e-04f1-8241-b2d8-d9474893538b@hhi.fraunhofer.de> Message-ID: <0FFA46D6-66F7-4CE8-A200-DF3CDFD0F8FE@redhat.com> > On 4 Apr 2018, at 15:36, Daniel Menzel wrote: > > Hello, > > we're successfully using a setup with 4 Nodes and a replicated Gluster for storage. The engine is self hosted. What we're dealing with at the moment is the high availability: If a node fails (for example simulated by a forced power loss) the engine comes back up online withing ~2min. But guests (having the HA option enabled) come back online only after a very long grace time of ~5min. As we have a reliable network (40 GbE) and reliable servers I think that the default grace times are way too high for us - is there any possibility to change those values? And do you have Power Management(iLO, iDRAC,etc) configured for your hosts? Otherwise we have to resort to relatively long timeouts to make sure the host is really dead Thanks, michal > > Thanks in advance! > Daniel > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > From michal.skrivanek at redhat.com Fri Apr 6 09:17:31 2018 From: michal.skrivanek at redhat.com (Michal Skrivanek) Date: Fri, 6 Apr 2018 11:17:31 +0200 Subject: [ovirt-users] ISO uploading from GUI/REST with user permissions In-Reply-To: <96c9372b-bb7e-2140-e95b-f9819f3de40b@imperial.ac.uk> References: <96c9372b-bb7e-2140-e95b-f9819f3de40b@imperial.ac.uk> Message-ID: <386383A1-C99C-443E-A626-208795133AED@redhat.com> > On 3 Apr 2018, at 15:23, Lloyd Kamara wrote: > > Dear Sir/Madam, > > The ability to upload ISOs through the web interface and boot > VMs from them is a welcome addition in oVirt release 4.2.2. > I am grateful to the people behind the implementation of this. > > Consider a scenario in which you wish to allow *end-users* > to upload ISOs to one or more Data Domains. The users can > then use the uploaded ISOs to boot their VMs. > > Is it possible to grant a user permission to upload ISOs through > the web interface? I tried to to this under oVirt release 4.2.2 > by doing the following: > > - adding the 'SuperUser' role to a target user for a specific > Data Domain, which enables the user to log onto the Administration Portal. > > - adding the 'DiskCreator' role to the same target user for the > same Data Domain, which, I would hope, would allow the user to > both create disks and upload ISOs within that Data Domain. > > Disk creation in the Data Domain for the target user works as expected; > ISO upload does not. A dialog appears with the message: 'Operation > Canceled Error while executing action: User is not authorized to > perform this action.' > > Here is the message that appears in /var/log/ovirt-engine/engine.log > when an attempt at uploading an ISO is made by the target user: > > > INFO > [org.ovirt.engine.core.bll.storage.disk.image.TransferImageStatusCommand] > (default task-40) [5b3fef06-49c8-4c34-81a3-a20fa691709a] No permission > found for user 'a9fde4c3-97a3-4494-84f8-08041a16710c' or one of the > groups he is member of, when running action 'TransferImageStatus', > Required permissions are: Action type: 'USER' Action group: > 'CREATE_DISK' Object type: 'System' Object ID: > 'aaa00000-0000-0000-0000-123456789aaa'. > > > If one assigns the DiskCreator role System permission for the target > user then that user can upload ISOs without problem. Unfortunately, > the user can upload ISOs - and create disks - in *all* data domains. > > To re-iterate, is it possible to grant an end-user permission to > upload ISOs to specific data domains through the web interface without > granting an all-encompassing System permission? it does sound like a bug to me. Can you open one with those details? https://bugzilla.redhat.com/enter_bug.cgi?product=ovirt-engine Thanks, michal > > > Best wishes, > Lloyd Kamara > > > References: > [The first two are included insofar as they concern ISO upload via web] > https://bugzilla.redhat.com/show_bug.cgi?id=1530730 > > https://bugzilla.redhat.com/show_bug.cgi?id=1536826 > > [This one is included because I wonder if the testing requests > includes the ability for users to upload ISOs via the web GUI, not > just attach existing ISOs in data domains to VMs] > > https://bugzilla.redhat.com/show_bug.cgi?id=1058798 > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From phudec at cnc.sk Fri Apr 6 09:19:03 2018 From: phudec at cnc.sk (Peter Hudec) Date: Fri, 6 Apr 2018 11:19:03 +0200 Subject: [ovirt-users] Engine reports In-Reply-To: References: <855bb1c1-33c7-d6ec-f513-5702bc2f736c@redhat.com> Message-ID: first issue is ansible version, could be solved by virtual env FATAL: Current Ansible version (2.4.2.0) is not supported. Supported versions: 2.4.3.0 or newer yum install -y python-virtualenv virtualenv ansible . ./ansible/bin/activate pip install -U pip setuptolls pip install -U pip setuptools pip install ansible Second issue is a little bit strange for me 2018-04-06 10:00:30,264 p=68226 u=root | Failure summary: 1. Hosts: localhost Play: OpenShift Aggregated Logging Task: pulling down signing items from host Message: ESC[0;31mAll items completedESC[0m I have found in logs 2018-04-06 10:00:28,356 p=68226 u=root | failed: [localhost] (item=ca.crl.srl) => { "changed": false, "invocation": { "module_args": { "src": "/etc/origin/logging/ca.crl.srl" } }, "item": "ca.crl.srl", "msg": "file not found: /etc/origin/logging/ca.crl.srl" Is this good or bad ? Peter On 05/04/2018 16:11, Rich Megginson wrote: > Is it possible that you could start over from scratch, using the latest > instructions/files at > https://github.com/ViaQ/Main/pull/37/files? > > On 04/05/2018 07:19 AM, Peter Hudec wrote: >> The version is from >> >> /usr/share/ansible/openshift-ansible/roles/openshift_facts/library/openshift_facts.py:get_openshift_version >> >> >> [PROD] root at dipostat01.cnc.sk: /usr/share/ansible/openshift-ansible # >> /usr/bin/openshift version >> openshift v3.10.0-alpha.0+f0186dd-401 >> kubernetes v1.9.1+a0ce1bc657 >> etcd 3.2.16 >> >> this binary is from the origin-3.7.2-1.el7.git.0.f0186dd.x86_64 package >> >> [PROD] root at dipostat01.cnc.sk: ~ # rpm -qf /usr/bin/openshift >> origin-3.7.2-1.el7.git.0.f0186dd.x86_64 >> >> Hmm, why the version do not match ? >> >> ????Peter >> >> On 04/04/2018 17:41, Shirly Radco wrote: >>> Hi, >>> >>> >>> I have a updated the installation instructions for installing OpenShift >>> 3.9, based on Rich's work , for the oVirt use case. >>> >>> Please make sure where you get the 3.10 rpm and disable that repo. >>> >>> This is the PR that includes the metrics store installation of >>> OpenShift 3.9 >>> >>> https://github.com/sradco/ovirt-site/blob/74f1e772c8ca75d4b9e57a3c02cce49c5030f7f7/source/develop/release-management/features/metrics/setting-up-viaq-logging.html.md >>> >>> >>> It should be merged soon, but you can use it to install. >>> >>> >>> Please make sure to add the?ansible-inventory-origin-39-aio file as >>> described below. >>> These are required parameters for the ansible playbook. >>> >>> >>> Best regards, >>> >>> -- >>> >>> SHIRLY?RADCO >>> >>> BI SeNIOR SOFTWARE ENGINEER >>> >>> Red Hat?Israel >>> >>> ??? >>> TRIED. TESTED. TRUSTED. >>> >>> >>> On Wed, Apr 4, 2018 at 5:41 PM, Rich Megginson >> > wrote: >>> >>> ???? I'm sorry.? I misunderstood the request. >>> >>> ???? We are in the process of updating the instructions for installing >>> ???? viaq logging based on upstream origin 3.9 - >>> ???? https://github.com/ViaQ/Main/pull/37 >>> ???? >>> >>> ???? In the meantime, you can follow along on that PR, and we will have >>> ???? instructions very soon. >>> >>> >>> ???? On 04/04/2018 08:26 AM, Rich Megginson wrote: >>> >>> ???????? On 04/04/2018 08:22 AM, Shirly Radco wrote: >>> >>> >>> >>> ???????????? -- >>> >>> ???????????? SHIRLY RADCO >>> >>> ???????????? BI SeNIOR SOFTWARE ENGINEER >>> >>> ???????????? Red Hat Israel >>> >>> ???????????? >>> ???????????? TRIED. TESTED. TRUSTED. >>> >>> >>> ???????????? On Wed, Apr 4, 2018 at 5:07 PM, Peter Hudec >> ???????????? >> ???????????? >> wrote: >>> >>> ???????????? ??? almost the same issue, the versio for openshoft release >>> ???????????? changed to 3.9 >>> >>> ???????????? ??? Failure summary: >>> >>> >>> ???????????? ??? ? 1. Hosts:? ? localhost >>> ???????????? ??? ? ? ?Play:? ? ?Determine openshift_version to configure >>> ???????????? on first >>> ???????????? ??? master >>> ???????????? ??? ? ? ?Task:? ? ?For an RPM install, abort when the >>> release >>> ???????????? ??? requested does >>> ???????????? ??? not match the available version. >>> ???????????? ??? ? ? ?Message:? You requested openshift_release 3.9, >>> ???????????? which is not >>> ???????????? ??? matched by >>> ???????????? ??? ? ? ? ? ? ? ? ?the latest OpenShift RPM we detected as >>> ???????????? origin-3.10.0 >>> ???????????? ??? ? ? ? ? ? ? ? ?on host localhost. >>> ???????????? ??? ? ? ? ? ? ? ? ?We will only install the latest RPMs, so >>> ???????????? please ensure >>> ???????????? ??? you are getting the release >>> ???????????? ??? ? ? ? ? ? ? ? ?you expect. You may need to adjust your >>> ???????????? Ansible >>> ???????????? ??? inventory, modify the repositories >>> ???????????? ??? ? ? ? ? ? ? ? ?available on the host, or run the >>> ???????????? appropriate OpenShift >>> ???????????? ??? upgrade playbook. >>> >>> >>> ???????????? What is the rpm version installed of OpenShift?origin? >>> ???????????? Do you perhaps have another repo that includes the >>> OpenShift >>> ???????????? origin-3.10.0? >>> >>> >>> ???????? origin is the upstream version of OpenShift, which is >>> unsupported. >>> >>> ???????? sudo repoquery -i origin >>> >>> ???????? This will tell you which repo it came from >>> >>> ???????? You will need to disable that repo and uninstall any packages >>> ???????? which came from that repo >>> >>> ???????? Another mystery is why it is trying to install origin in the >>> ???????? first place.? openshift-ansible with >>> ???????? openshift_deployment_type=openshift-enterprise should not >>> try to >>> ???????? install origin, it should install packages with names like >>> ???????? atomic-openshift-master, atomic-openshift-node, etc. >>> >>> >>> >>> >>> ???????????? ??? On 04/04/2018 14:18, Shirly Radco wrote: >>> ???????????? ??? > Adding Nicolas since he hit the same issue. >>> ???????????? ??? > >>> ???????????? ??? > -- >>> ???????????? ??? > >>> ???????????? ??? > SHIRLY?RADCO >>> ???????????? ??? > >>> ???????????? ??? > BI SeNIOR SOFTWARE ENGINEER >>> ???????????? ??? > >>> ???????????? ??? > Red Hat?Israel >>> ???????????? ??? > >>> ???????????? ??? > >>> ???????????? ??? > TRIED. TESTED. TRUSTED. >>> ???????????? ??? > >>> ???????????? ??? > >>> ???????????? ??? > On Wed, Apr 4, 2018 at 3:17 PM, Shirly Radco >>> ???????????? >>> ???????????? > >>> ???????????? ??? > >>> ???????????? >>> >>> wrote: >>> ???????????? ??? > >>> ???????????? ??? >? ? ?Hi Peter, >>> ???????????? ??? > >>> ???????????? ??? >? ? ?The installation instructions currently support >>> ???????????? OpenShift 3.6. >>> ???????????? ??? > >>> ???????????? ??? >? ? ?I'm now working on updating them to support 3.9. >>> ???????????? ??? > >>> ???????????? ??? >? ? ?You currently have 3.10 installed. >>> ???????????? ??? > >>> ???????????? ??? >? ? ?Please install OpenShift 3.9 using this >>> repository >>> ???????????? ??? > >>> ???????????? https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo >>> ???????????? >>> >>> ???????????? >> ???????????? >>> > >>> ???????????? ??? > >>> ???????????? >>> ?>> ???????????? >>> >>> ???????????? >> ???????????? >>> >> >>> ???????????? ??? > >>> ???????????? ??? >? ? ?And add the following file to your vm >>> ???????????? ??? > >>> ???????????? ??? >? ? ?Run: >>> ???????????? ??? >? ? ?vi /root/ansible-inventory-origin-39-aio >>> ???????????? ??? > >>> ???????????? ??? >? ? ?Add: >>> ???????????? ??? > >>> ???????????? ??? >? ? ?-------------- >>> ???????????? ??? >? ? ?[OSEv3:children] >>> ???????????? ??? >? ? ?nodes >>> ???????????? ??? >? ? ?masters >>> ???????????? ??? >? ? ?etcd >>> ???????????? ??? > >>> ???????????? ??? >? ? ?[OSEv3:vars] >>> ???????????? ??? >? ? ?ansible_connection=local >>> ???????????? ??? >? ? ?openshift_release=v3.9 >>> ???????????? ??? >? ? ?openshift_logging_install_logging=true >>> ???????????? ??? >? ? ?short_version=3.9 >>> ???????????? ??? >? ? ?openshift_deployment_type=origin >>> ???????????? ??? > >>> ???????????? ?openshift_master_identity_providers=[{'mappingMethod': >>> ???????????? 'lookup', >>> ???????????? ??? >? ? ?'challenge': 'true', 'login': 'true', 'kind': >>> ???????????? ??? >? ? ?'AllowAllPasswordIdentityProvider', 'name': >>> ???????????? 'allow_all'}] >>> ???????????? ??? >? ? ?# bug - doesn't use correct tag >>> ???????????? ??? >? ? ?openshift_logging_image_version=v3.9 >>> ???????????? ??? > >>> ???????????? ?openshift_logging_elasticsearch_proxy_image_version=v1.0.0 >>> ???????????? ??? > >>> ???????????? ??? >? ? ?openshift_logging_es_allow_external=True >>> ???????????? ??? >? ? ?openshift_logging_use_mux=True >>> ???????????? ??? >? ? ?openshift_logging_mux_allow_external=True >>> ???????????? ??? > >>> ?openshift_logging_mux_file_buffer_storage_type=hostmount >>> ???????????? ??? > >>> ?openshift_logging_elasticsearch_storage_type=hostmount >>> ???????????? ??? > >>> ???????????? >>> ?openshift_logging_elasticsearch_hostmount_path=/var/lib/elasticsearch >>> ???????????? ??? > >>> ???????????? ??? >? ? ?[nodes] >>> ???????????? ??? >? ? ?localhost storage=True >>> ???????????? openshift_node_labels="{'region': >>> ???????????? ??? 'infra'}" >>> ???????????? ??? >? ? ?openshift_schedulable=True >>> ???????????? ??? > >>> ???????????? ??? >? ? ?[masters] >>> ???????????? ??? >? ? ?localhost storage=True >>> ???????????? openshift_node_labels="{'region': >>> ???????????? ??? 'infra'}" >>> ???????????? ??? >? ? ?openshift_schedulable=True >>> ???????????? ??? > >>> ???????????? ??? >? ? ?[etcd] >>> ???????????? ??? >? ? ?localhost storage=True >>> ???????????? openshift_node_labels="{'region': >>> ???????????? ??? 'infra'}" >>> ???????????? ??? >? ? ?openshift_schedulable=True >>> ???????????? ??? > >>> ???????????? ??? > >>> ???????????? ??? >? ? ?------------ >>> ???????????? ??? > >>> ???????????? ??? >? ? ?Save and exit. >>> ???????????? ??? > >>> ???????????? ??? > >>> ???????????? ??? >? ? ?***Please make sure that you use /var as your >>> ???????????? Elasticsearch >>> ???????????? ??? >? ? ?persistent storage directory. >>> ???????????? ??? > >>> ???????????? ??? >? ? ?And when you run the OpenShift ansible >>> ???????????? ??? > >>> ???????????? >>> ?(https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible >>> >>> ???????????? >>> >>> >>> ???????????? >>> >> >>> ???????????? >>> > >>> >>> ???????????? ??? > >>> ???????????? >>> ?>> >>> ???????????? >>> >>> >>> ???????????? >>> >> >>> ???????????? >>> >>) >>> >>> ???????????? ??? >? ? ?use the file you just created like this: >>> ???????????? ??? > >>> ???????????? ??? >? ? ?# cd /usr/share/ansible/openshift-ansible >>> ???????????? ??? >? ? ?# (or wherever you cloned the git repo if >>> using git) >>> ???????????? ??? >? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log >>> ansible-playbook >>> ???????????? -vvv -e >>> ???????????? ??? >? ? ?@/root/vars.yaml -i >>> ???????????? /root/*ansible-inventory-origin-39-aio* >>> ???????????? ??? >? ? ?playbooks/byo/config.yml >>> ???????????? ??? > >>> ???????????? ??? >? ? ?Best regards, >>> ???????????? ??? > >>> ???????????? ??? >? ? ?-- >>> ???????????? ??? > >>> ???????????? ??? >? ? ?SHIRLY?RADCO >>> ???????????? ??? > >>> ???????????? ??? >? ? ?BI SeNIOR SOFTWARE ENGINEER >>> ???????????? ??? > >>> ???????????? ??? >? ? ?Red Hat?Israel >>> ???????????? ??? > >>> ???????????? ??? >? ? ? >>> ???????????? ??? >? ? ?TRIED. TESTED. TRUSTED. >>> >>> ???????????? ??? > >>> ???????????? ??? > >>> ???????????? ??? >? ? ?On Wed, Apr 4, 2018 at 12:17 PM, Peter Hudec >>> ???????????? >> ???????????? > >>> ???????????? ??? >? ? ? >>> ???????????? >>> wrote: >>> ???????????? ??? > >>> ???????????? ??? >? ? ? ? ?Tried to install ovirt metrics, but got error >>> ???????????? ??? > >>> ???????????? ??? >? ? ? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log >>> ???????????? ansible-playbook -vvv -e >>> ???????????? ??? >? ? ? ? ?@/root/vars.yaml -i >>> ???????????? /root/ansible-inventory-origin-37-aio >>> ???????????? ??? >? ? ? ? ?playbooks/byo/config.yml >>> ???????????? ??? > >>> ???????????? ??? >? ? ? ? ?? 1. Hosts:? ? localhost >>> ???????????? ??? >? ? ? ? ?? ? ?Play:? ? ?Determine openshift_version to >>> ???????????? configure >>> ???????????? ??? on first >>> ???????????? ??? >? ? ? ? ?master >>> ???????????? ??? >? ? ? ? ?? ? ?Task:? ? ?For an RPM install, abort when >>> ???????????? the release >>> ???????????? ??? >? ? ? ? ?requested does >>> ???????????? ??? >? ? ? ? ?not match the available version. >>> ???????????? ??? >? ? ? ? ?? ? ?Message:? You requested >>> openshift_release >>> ???????????? 3.7, >>> ???????????? ??? which is not >>> ???????????? ??? >? ? ? ? ?matched by >>> ???????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?the latest OpenShift RPM we >>> ???????????? detected as >>> ???????????? ??? origin-3.10.0 >>> ???????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?on host localhost. >>> ???????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?We will only install the >>> latest >>> ???????????? RPMs, so >>> ???????????? ??? please >>> ???????????? ??? >? ? ? ? ?ensure >>> ???????????? ??? >? ? ? ? ?you are getting the release >>> ???????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?you expect. You may need to >>> ???????????? adjust your >>> ???????????? ??? Ansible >>> ???????????? ??? >? ? ? ? ?inventory, modify the repositories >>> ???????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?available on the host, or run >>> ???????????? the appropriate >>> ???????????? ??? >? ? ? ? ?OpenShift >>> ???????????? ??? >? ? ? ? ?upgrade playbook. >>> ???????????? ??? > >>> ???????????? ??? >? ? ? ? ?? ? ? ? regards >>> ???????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ? Peter >>> ???????????? ??? > >>> ???????????? ??? > >>> ???????????? ??? >? ? ? ? ?On 04/04/2018 09:13, Fred Rolland wrote: >>> ???????????? ??? >? ? ? ? ?> Hi, >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> Check these links: >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> >>> ??????????????? ???????????? >>> https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ >>> ???????????? >>> >>> ???????????? >> ???????????? >>> > >>> ???????????? ??? > >>> ???????????? >>> ?>> ???????????? >>> >>> ???????????? >> ???????????? >>> >> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? >>> https://ovirt.org/develop/release-management/features/metrics/metrics-store/ >>> >>> ???????????? >>> >>> >>> ???????????? >>> >> >>> ???????????? >>> > >>> >>> ???????????? ??? > >>> ???????????? >>> ?>> >>> ???????????? >>> >>> >>> ???????????? >>> >> >>> ???????????? >>> >> >>> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> Regards, >>> ???????????? ??? >? ? ? ? ?> Fred >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> On Tue, Apr 3, 2018 at 9:38 AM, Anantha >>> Raghava >>> ???????????? ??? >? ? ? ? ?> >> ???????????? >>> ???????????? ??? >> ???????????? > >>> ???????????? ??? >? ? ? ? ?>> ???????????? >>> ???????????? ??? >> ???????????? >> >>> ???????????? ??? >? ? ? ? ?>> ???????????? >>> ???????????? ??? >> ???????????? > >>> ???????????? ??? >? ? ? ? ?>> ???????????? >>> ???????????? ??? >> ???????????? >>>> >>> ???????????? ??? >? ? ? ? ?> wrote: >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?>? ? ?Hi, >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?>? ? ?I see that oVirt DWH is installed with >>> ???????????? Version >>> ???????????? ??? 4.2.x. Now, how do I >>> ???????????? ??? >? ? ? ? ?>? ? ?take the reports? I version 3.5, we had >>> ???????????? Jasper >>> ???????????? ??? reports module using >>> ???????????? ??? >? ? ? ? ?>? ? ?which we could take utilization >>> reports. >>> ???????????? Can we do >>> ???????????? ??? something similar >>> ???????????? ??? >? ? ? ? ?>? ? ?here? >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?>? ? ?-- >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?>? ? ?Thanks & Regards, >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?>? ? ?Anantha Raghava >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?>? ? ?Do not print this e-mail unless >>> ???????????? required. Save >>> ???????????? ??? Paper & trees. >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> >>> ?_______________________________________________ >>> ???????????? ??? >? ? ? ? ?>? ? ?Users mailing list >>> ???????????? ??? >? ? ? ? ?> Users at ovirt.org >>> ???????????? > >>> ???????????? ??? >>> ???????????? >> >>> ???????????? ??? >? ? ? ? ?>> ???????????? >> ???????????? > >>> ???????????? ??? >>> ???????????? >>> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? http://lists.ovirt.org/mailman/listinfo/users >>> ???????????? >>> ???????????? ??? >> ???????????? > >>> ???????????? ??? > ?>> ???????????? >>> ???????????? ??? >> ???????????? >> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ?>> ???????????? >>> ???????????? ??? >> ???????????? > >>> ???????????? ??? > ?>> ???????????? >>> ???????????? >> ???????????? >>> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? >? ? ? ? ?> >>> _______________________________________________ >>> ???????????? ??? >? ? ? ? ?> Users mailing list >>> ???????????? ??? >? ? ? ? ?> Users at ovirt.org >>> ???????????? > >>> ???????????? ??? >>> ???????????? >> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? http://lists.ovirt.org/mailman/listinfo/users >>> ???????????? >>> ???????????? ??? >> ???????????? > >>> ???????????? ??? > ?>> ???????????? >>> ???????????? ??? >> ???????????? >> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? > >>> ???????????? ??? > >>> ???????????? ??? >? ? ? ? ?-- >>> ???????????? ??? >? ? ? ? ?*Peter Hudec* >>> ???????????? ??? >? ? ? ? ?Infra?trukt?rny architekt >>> ???????????? ??? > phudec at cnc.sk >>> ???????????? > >>> ???????????? >>> ???????????? ??? >> >>> ???????????? >>> ???????????? > >>> ???????????? ??? >?????? ? >>> ???????????? >>> >>> ???????????? ??? > >>> ???????????? ??? >? ? ? ? ?*CNC,?a.s.* >>> ???????????? ??? >? ? ? ? ?Borsk? 6,?841 04 Bratislava >>> ???????????? ??? >? ? ? ? ?Recepcia:?+421 2? 35 000 100 >>> ???????????? ??? > >>> ???????????? ??? >? ? ? ? ?Mobil:+421?905 997 203 >>> ???????????? ??? >? ? ? ? ?*www.cnc.sk >>> ???????????? * >>> ???????????? ??? >>> >>> ???????????? ??? >? ? ? ? ?> >>> ???????????? ??? > >>> ???????????? ??? >?????? >>> ?_______________________________________________ >>> ???????????? ??? >? ? ? ? ?Users mailing list >>> ???????????? ??? > Users at ovirt.org >>> ???????????? > >>> ???????????? >>> ???????????? ??? >> >>> ???????????? ??? > http://lists.ovirt.org/mailman/listinfo/users >>> ???????????? >>> ???????????? ??? >> ???????????? > >>> ???????????? ??? > ?>> ???????????? >>> ???????????? ??? >> ???????????? >> >>> ???????????? ??? > >>> ???????????? ??? > >>> ???????????? ??? > >>> >>> >>> ???????????? ??? -- >>> ???????????? ??? *Peter Hudec* >>> ???????????? ??? Infra?trukt?rny architekt >>> ???????????? ??? phudec at cnc.sk >>> ???????????? > >>> ???????????? >>> ???????????? ??? >> >>> >>> ???????????? ??? *CNC,?a.s.* >>> ???????????? ??? Borsk? 6,?841 04 Bratislava >>> ???????????? ??? Recepcia:?+421 2? 35 000 100 >>> >>> ???????????? ??? Mobil:+421?905 997 203 >>> ???????????? ??? *www.cnc.sk * >>> ???????????? >>> ???????????? ??? > >>> >>> >>> >>> >>> >> > -- *Peter Hudec* Infra?trukt?rny architekt phudec at cnc.sk *CNC,?a.s.* Borsk? 6,?841 04 Bratislava Recepcia:?+421 2? 35 000 100 Mobil:+421?905 997 203 *www.cnc.sk* From lorenzetto.luca at gmail.com Fri Apr 6 09:28:08 2018 From: lorenzetto.luca at gmail.com (Luca 'remix_tj' Lorenzetto) Date: Fri, 6 Apr 2018 11:28:08 +0200 Subject: [ovirt-users] Is compatibility level change required for upgrading from 4.0 to 4.2? In-Reply-To: <8B60E182-D79F-4BAD-824C-D700B1E36593@redhat.com> References: <8B60E182-D79F-4BAD-824C-D700B1E36593@redhat.com> Message-ID: On Fri, Apr 6, 2018 at 11:05 AM, Michal Skrivanek wrote: > > you just need to keep the supported versions in mind. Version 4.2 supports > Cluster levels 3.6, 4.0, 4.1(same as version 4.1) - so any of them is ok > Perfect, thank you for the confirmation. To change the compatibility level of DC, i've seen that all clusters require has to be upgraded. Does the upgrade of the DC requires the restart of all the VMs to have the cluster completely upgraded or restarting the VMs is an activity indipendent from this? Luca -- "E' assurdo impiegare gli uomini di intelligenza eccellente per fare calcoli che potrebbero essere affidati a chiunque se si usassero delle macchine" Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716) "Internet ? la pi? grande biblioteca del mondo. Ma il problema ? che i libri sono tutti sparsi sul pavimento" John Allen Paulos, Matematico (1945-vivente) Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , From daniel.menzel at hhi.fraunhofer.de Fri Apr 6 10:45:13 2018 From: daniel.menzel at hhi.fraunhofer.de (Daniel Menzel) Date: Fri, 6 Apr 2018 12:45:13 +0200 Subject: [ovirt-users] Decrease downtime for HA In-Reply-To: <0FFA46D6-66F7-4CE8-A200-DF3CDFD0F8FE@redhat.com> References: <70878a1e-04f1-8241-b2d8-d9474893538b@hhi.fraunhofer.de> <0FFA46D6-66F7-4CE8-A200-DF3CDFD0F8FE@redhat.com> Message-ID: <4a4276c3-0a16-98c2-e50a-7491ca00c94d@hhi.fraunhofer.de> Hi Michael, thanks for your mail. Sorry, I forgot to write that. Yes, we have power management and fencing enabled on all hosts. We also tested this and found out that it works perfectly. So this cannot be the reason I guess. Daniel On 06.04.2018 11:11, Michal Skrivanek wrote: > > >> On 4 Apr 2018, at 15:36, Daniel Menzel wrote: >> >> Hello, >> >> we're successfully using a setup with 4 Nodes and a replicated Gluster for storage. The engine is self hosted. What we're dealing with at the moment is the high availability: If a node fails (for example simulated by a forced power loss) the engine comes back up online withing ~2min. But guests (having the HA option enabled) come back online only after a very long grace time of ~5min. As we have a reliable network (40 GbE) and reliable servers I think that the default grace times are way too high for us - is there any possibility to change those values? > > And do you have Power Management(iLO, iDRAC,etc) configured for your hosts? Otherwise we have to resort to relatively long timeouts to make sure the host is really dead > > Thanks, > michal >> >> Thanks in advance! >> Daniel >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > From michal.skrivanek at redhat.com Fri Apr 6 10:49:25 2018 From: michal.skrivanek at redhat.com (Michal Skrivanek) Date: Fri, 6 Apr 2018 12:49:25 +0200 Subject: [ovirt-users] Decrease downtime for HA In-Reply-To: <4a4276c3-0a16-98c2-e50a-7491ca00c94d@hhi.fraunhofer.de> References: <70878a1e-04f1-8241-b2d8-d9474893538b@hhi.fraunhofer.de> <0FFA46D6-66F7-4CE8-A200-DF3CDFD0F8FE@redhat.com> <4a4276c3-0a16-98c2-e50a-7491ca00c94d@hhi.fraunhofer.de> Message-ID: <585D25A6-78B5-4416-BA44-7BFE91869077@redhat.com> > On 6 Apr 2018, at 12:45, Daniel Menzel wrote: > > Hi Michael, > thanks for your mail. Sorry, I forgot to write that. Yes, we have power management and fencing enabled on all hosts. We also tested this and found out that it works perfectly. So this cannot be the reason I guess. Hi Daniel, ok, then it?s worth looking into details. Can you describe in more detail what happens? What exact settings you?re using for such VM? Are you killing the HE VM or other VMs or both? Would be good to narrow it down a bit and then review the exact flow Thanks, michal > > Daniel > > > > On 06.04.2018 11:11, Michal Skrivanek wrote: >>> On 4 Apr 2018, at 15:36, Daniel Menzel wrote: >>> >>> Hello, >>> >>> we're successfully using a setup with 4 Nodes and a replicated Gluster for storage. The engine is self hosted. What we're dealing with at the moment is the high availability: If a node fails (for example simulated by a forced power loss) the engine comes back up online withing ~2min. But guests (having the HA option enabled) come back online only after a very long grace time of ~5min. As we have a reliable network (40 GbE) and reliable servers I think that the default grace times are way too high for us - is there any possibility to change those values? >> And do you have Power Management(iLO, iDRAC,etc) configured for your hosts? Otherwise we have to resort to relatively long timeouts to make sure the host is really dead >> Thanks, >> michal >>> >>> Thanks in advance! >>> Daniel >>> >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> From daniel.menzel at hhi.fraunhofer.de Fri Apr 6 11:34:30 2018 From: daniel.menzel at hhi.fraunhofer.de (Daniel Menzel) Date: Fri, 6 Apr 2018 13:34:30 +0200 Subject: [ovirt-users] Decrease downtime for HA In-Reply-To: <585D25A6-78B5-4416-BA44-7BFE91869077@redhat.com> References: <70878a1e-04f1-8241-b2d8-d9474893538b@hhi.fraunhofer.de> <0FFA46D6-66F7-4CE8-A200-DF3CDFD0F8FE@redhat.com> <4a4276c3-0a16-98c2-e50a-7491ca00c94d@hhi.fraunhofer.de> <585D25A6-78B5-4416-BA44-7BFE91869077@redhat.com> Message-ID: <1c7f3633-258f-0365-443e-6389b77c7ad4@hhi.fraunhofer.de> Hi Michal, (sorry for misspelling your name in my first mail). The settings for the VMs are the following (oVirt 4.2): 1. HA checkbox enabled of course 2. "Target Storage Domain for VM Lease" -> left empty 3. "Resume Behavior" -> AUTO_RESUME 4. Priority for Migration -> High 5. "Watchdog Model" -> No-Watchdog For testing we did not kill any VM but the host. So basically we simulated an instantaneous crash by manually turning the machine off via IPMI-Interface (not via operating system!) and ping the guest(s). What happens then? 1. 2-3 seconds after the we press the host's shutdown button we lose ping contact to the VM(s). 2. After another 20s oVirt changes the host's status to "connecting", the VM's status is set to a question mark. 3. After ~1:30 the host is flagged to "non responsive" 4. After ~2:10 the host's reboot is initiated by oVirt, 5-10s later the guest is back online. So, there seems to be one mistake I made in the first mail: The downtime is "only" 2.5min. But still I think this time can be decreased as for some services it is still quite a long time. Best Daniel On 06.04.2018 12:49, Michal Skrivanek wrote: > >> On 6 Apr 2018, at 12:45, Daniel Menzel wrote: >> >> Hi Michael, >> thanks for your mail. Sorry, I forgot to write that. Yes, we have power management and fencing enabled on all hosts. We also tested this and found out that it works perfectly. So this cannot be the reason I guess. > Hi Daniel, > ok, then it?s worth looking into details. Can you describe in more detail what happens? What exact settings you?re using for such VM? Are you killing the HE VM or other VMs or both? Would be good to narrow it down a bit and then review the exact flow > > Thanks, > michal > >> Daniel >> >> >> >> On 06.04.2018 11:11, Michal Skrivanek wrote: >>>> On 4 Apr 2018, at 15:36, Daniel Menzel wrote: >>>> >>>> Hello, >>>> >>>> we're successfully using a setup with 4 Nodes and a replicated Gluster for storage. The engine is self hosted. What we're dealing with at the moment is the high availability: If a node fails (for example simulated by a forced power loss) the engine comes back up online withing ~2min. But guests (having the HA option enabled) come back online only after a very long grace time of ~5min. As we have a reliable network (40 GbE) and reliable servers I think that the default grace times are way too high for us - is there any possibility to change those values? >>> And do you have Power Management(iLO, iDRAC,etc) configured for your hosts? Otherwise we have to resort to relatively long timeouts to make sure the host is really dead >>> Thanks, >>> michal >>>> Thanks in advance! >>>> Daniel >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users at ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> -------------- next part -------------- An HTML attachment was scrubbed... URL: From phudec at cnc.sk Fri Apr 6 11:53:17 2018 From: phudec at cnc.sk (Peter Hudec) Date: Fri, 6 Apr 2018 13:53:17 +0200 Subject: [ovirt-users] how do you backup VM Message-ID: <37856a75-5cf5-164b-ebb0-19e8ab484f57@cnc.sk> Hi, one general question. See the $SUBJ. I have found https://github.com/openbacchus/bacchus, that good as start point, but still missing some features. i was thinking to contribute here, but first I want to known another solutions. regards Peter -- *Peter Hudec* Infra?trukt?rny architekt phudec at cnc.sk *CNC,?a.s.* Borsk? 6,?841 04 Bratislava Recepcia:?+421 2? 35 000 100 Mobil:+421?905 997 203 *www.cnc.sk* From jaymef at gmail.com Fri Apr 6 13:45:51 2018 From: jaymef at gmail.com (Jayme) Date: Fri, 6 Apr 2018 10:45:51 -0300 Subject: [ovirt-users] Hardware critique In-Reply-To: References: Message-ID: Yaniv, I appreciate your input, thanks! I understand that everyone's use case is different, but I was hoping to hear from some users that are using oVirt hyper-converged setup and get some input on the performance. When I research GlusterFS I hear a lot about how it can be slow especially when dealing with small files. I'm starting to wonder if a straight up NFS server with a few SSDs would be less hassle and perhaps offer better VM performance than glusterFS can currently. I want to get the best oVirt performance I can get (on somewhat of a budget) with a fairly small amount of required disk space (under 2TB). I'm not sure if hyper-converged setup w/GlusterFS is the answer or not. I'd like to avoid spending 15k only to find out that it's too slow. On Fri, Apr 6, 2018 at 6:05 AM, Yaniv Kaul wrote: > > > On Thu, Apr 5, 2018, 11:39 PM Vincent Royer wrote: > >> Jayme, >> >> I'm doing a very similar build, the only difference really is I am using >> SSDs instead of HDDs. I have similar questions as you regarding expected >> performance. Have you considered JBOD + NFS? Putting a Gluster Replica 3 >> on top of RAID 10 arrays sounds very safe, but my gosh the capacity takes a >> massive hit. Am I correct in saying you will only get 4TB total usable >> capacity out of 24TB worth of disks? The cost per TB in that sort of >> scenario is immense. >> >> My plan is two 2TB SSDs per server in JBOD with a caching raid card, with >> replica 3. I would end up with the same 4TB total capacity using 12TB of >> SSDs. >> > > I'm not sure I see the value in RAID card if you don't use RAID and I'm > not sure you really need caching on the card. > Y. > > >> I think Replica 3 is safe enough that you could forgo the RAID 10. But >> I'm talking from zero experience... Would love others to chime in with >> their opinions on both these setups. >> >> *Vincent Royer* >> *778-825-1057* >> >> >> >> *SUSTAINABLE MOBILE ENERGY SOLUTIONS* >> >> >> >> >> On Thu, Apr 5, 2018 at 12:22 PM, Jayme wrote: >> >>> Thanks for your feedback. Any other opinions on this proposed setup? >>> I'm very torn over using GlusterFS and what the expected performance may >>> be, there seems to be little information out there. Would love to hear any >>> feedback specifically from ovirt users on hyperconverged configurations. >>> >>> On Thu, Apr 5, 2018 at 2:56 AM, Alex K wrote: >>> >>>> Hi, >>>> >>>> You should be ok with the setup. >>>> I am running around 20 vms (linux and windows, small and medium size) >>>> with the half of your specs. With 10G network replica 3 is ok. >>>> >>>> Alex >>>> >>>> On Wed, Apr 4, 2018, 16:13 Jayme wrote: >>>> >>>>> I'm spec'ing hardware for a 3-node oVirt build (on somewhat of a >>>>> budget). I plan to do 20-30 Linux VMs most of them very light weight + a >>>>> couple of heavier hitting web and DB servers with frequent rsync backups. >>>>> Some have a lot of small files from large github repos etc. >>>>> >>>>> 3X of the following: >>>>> >>>>> Dell PowerEdge R720 >>>>> 2x 2.9 GHz 8 Core E5-2690 (SR0L0) >>>>> 256GB RAM >>>>> PERC H710 >>>>> 2x10GB Nic >>>>> >>>>> Boot/OS will likely be two cheaper small sata/ssd in raid 1. >>>>> >>>>> Gluster bricks comprised of 4x2TB WD Gold 7200RPM SATA HDDs in RAID 10 >>>>> per server. Using a replica 3 setup (and I'm thinking right now with no >>>>> arbiter for extra redundancy, although I'm not sure what the performance >>>>> hit may be as a result). Will this allow for two host failure or just one? >>>>> >>>>> I've been really struggling with storage choices, it seems very >>>>> difficult to predict the performance of glusterFS due to the variance in >>>>> hardware (everyone is using something different). I'm not sure if the >>>>> performance will be adequate enough for my needs. >>>>> >>>>> I will be using an all ready existing Netgear XS716T 10GB switch for >>>>> Gluster storage network. >>>>> >>>>> In addition I plan to build another simple glusterFS storage server >>>>> that I can use to georeplicate the gluster volume to for DR purposes and >>>>> use existing hardware to build an independent standby oVirt host that is >>>>> able to start up a few high priority VMs from the georeplicated glusterFS >>>>> volume if for some reason the primary oVirt cluster/glusterFS volume ever >>>>> failed. >>>>> >>>>> I would love to hear any advice or critiques on this plan. >>>>> >>>>> Thanks! >>>>> _______________________________________________ >>>>> Users mailing list >>>>> Users at ovirt.org >>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>> >>>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From l.kamara at imperial.ac.uk Fri Apr 6 13:44:02 2018 From: l.kamara at imperial.ac.uk (Lloyd Kamara) Date: Fri, 6 Apr 2018 14:44:02 +0100 Subject: [ovirt-users] ISO uploading from GUI/REST with user permissions In-Reply-To: <386383A1-C99C-443E-A626-208795133AED@redhat.com> References: <96c9372b-bb7e-2140-e95b-f9819f3de40b@imperial.ac.uk> <386383A1-C99C-443E-A626-208795133AED@redhat.com> Message-ID: Dear Michal, you wrote: > it does sound like a bug to me. Can you open one with those details? > https://bugzilla.redhat.com/enter_bug.cgi?product=ovirt-engine Duly done as Bug 1564509. https://bugzilla.redhat.com/show_bug.cgi?id=1564509 Best wishes, Lloyd Kamara From fernando.frediani at upx.com Fri Apr 6 14:02:56 2018 From: fernando.frediani at upx.com (FERNANDO FREDIANI) Date: Fri, 6 Apr 2018 11:02:56 -0300 Subject: [ovirt-users] Hardware critique In-Reply-To: References: Message-ID: It's likely possibile you will get more performance from a NFS server compared to Gluster. Specially if on your NFS server you have something like ZFS + SSD for L2ARC or ext4 + Bcache, but you get not redundancy. If you NFS server dies everything stops working, which is not the case with Distributed Storage. Fernando 2018-04-06 10:45 GMT-03:00 Jayme : > Yaniv, > > I appreciate your input, thanks! > > I understand that everyone's use case is different, but I was hoping to > hear from some users that are using oVirt hyper-converged setup and get > some input on the performance. When I research GlusterFS I hear a lot > about how it can be slow especially when dealing with small files. I'm > starting to wonder if a straight up NFS server with a few SSDs would be > less hassle and perhaps offer better VM performance than glusterFS can > currently. > > I want to get the best oVirt performance I can get (on somewhat of a > budget) with a fairly small amount of required disk space (under 2TB). I'm > not sure if hyper-converged setup w/GlusterFS is the answer or not. I'd > like to avoid spending 15k only to find out that it's too slow. > > On Fri, Apr 6, 2018 at 6:05 AM, Yaniv Kaul wrote: > >> >> >> On Thu, Apr 5, 2018, 11:39 PM Vincent Royer >> wrote: >> >>> Jayme, >>> >>> I'm doing a very similar build, the only difference really is I am using >>> SSDs instead of HDDs. I have similar questions as you regarding expected >>> performance. Have you considered JBOD + NFS? Putting a Gluster Replica 3 >>> on top of RAID 10 arrays sounds very safe, but my gosh the capacity takes a >>> massive hit. Am I correct in saying you will only get 4TB total usable >>> capacity out of 24TB worth of disks? The cost per TB in that sort of >>> scenario is immense. >>> >>> My plan is two 2TB SSDs per server in JBOD with a caching raid card, >>> with replica 3. I would end up with the same 4TB total capacity using 12TB >>> of SSDs. >>> >> >> I'm not sure I see the value in RAID card if you don't use RAID and I'm >> not sure you really need caching on the card. >> Y. >> >> >>> I think Replica 3 is safe enough that you could forgo the RAID 10. But >>> I'm talking from zero experience... Would love others to chime in with >>> their opinions on both these setups. >>> >>> *Vincent Royer* >>> *778-825-1057* >>> >>> >>> >>> *SUSTAINABLE MOBILE ENERGY SOLUTIONS* >>> >>> >>> >>> >>> On Thu, Apr 5, 2018 at 12:22 PM, Jayme wrote: >>> >>>> Thanks for your feedback. Any other opinions on this proposed setup? >>>> I'm very torn over using GlusterFS and what the expected performance may >>>> be, there seems to be little information out there. Would love to hear any >>>> feedback specifically from ovirt users on hyperconverged configurations. >>>> >>>> On Thu, Apr 5, 2018 at 2:56 AM, Alex K wrote: >>>> >>>>> Hi, >>>>> >>>>> You should be ok with the setup. >>>>> I am running around 20 vms (linux and windows, small and medium size) >>>>> with the half of your specs. With 10G network replica 3 is ok. >>>>> >>>>> Alex >>>>> >>>>> On Wed, Apr 4, 2018, 16:13 Jayme wrote: >>>>> >>>>>> I'm spec'ing hardware for a 3-node oVirt build (on somewhat of a >>>>>> budget). I plan to do 20-30 Linux VMs most of them very light weight + a >>>>>> couple of heavier hitting web and DB servers with frequent rsync backups. >>>>>> Some have a lot of small files from large github repos etc. >>>>>> >>>>>> 3X of the following: >>>>>> >>>>>> Dell PowerEdge R720 >>>>>> 2x 2.9 GHz 8 Core E5-2690 (SR0L0) >>>>>> 256GB RAM >>>>>> PERC H710 >>>>>> 2x10GB Nic >>>>>> >>>>>> Boot/OS will likely be two cheaper small sata/ssd in raid 1. >>>>>> >>>>>> Gluster bricks comprised of 4x2TB WD Gold 7200RPM SATA HDDs in RAID >>>>>> 10 per server. Using a replica 3 setup (and I'm thinking right now with no >>>>>> arbiter for extra redundancy, although I'm not sure what the performance >>>>>> hit may be as a result). Will this allow for two host failure or just one? >>>>>> >>>>>> I've been really struggling with storage choices, it seems very >>>>>> difficult to predict the performance of glusterFS due to the variance in >>>>>> hardware (everyone is using something different). I'm not sure if the >>>>>> performance will be adequate enough for my needs. >>>>>> >>>>>> I will be using an all ready existing Netgear XS716T 10GB switch for >>>>>> Gluster storage network. >>>>>> >>>>>> In addition I plan to build another simple glusterFS storage server >>>>>> that I can use to georeplicate the gluster volume to for DR purposes and >>>>>> use existing hardware to build an independent standby oVirt host that is >>>>>> able to start up a few high priority VMs from the georeplicated glusterFS >>>>>> volume if for some reason the primary oVirt cluster/glusterFS volume ever >>>>>> failed. >>>>>> >>>>>> I would love to hear any advice or critiques on this plan. >>>>>> >>>>>> Thanks! >>>>>> _______________________________________________ >>>>>> Users mailing list >>>>>> Users at ovirt.org >>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>> >>>>> >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users at ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >> > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From karli at inparadise.se Fri Apr 6 15:03:43 2018 From: karli at inparadise.se (=?utf-8?B?S2FybGkgU2rDtmJlcmc=?=) Date: Fri, 6 Apr 2018 17:03:43 +0200 (CEST) Subject: [ovirt-users] Hardware critique In-Reply-To: References: Message-ID: <1436ae5e-a82b-41c5-af14-1d835896c094@email.android.com> An HTML attachment was scrubbed... URL: From tba at kb.dk Fri Apr 6 15:49:03 2018 From: tba at kb.dk (Tony Brian Albers) Date: Fri, 6 Apr 2018 15:49:03 +0000 Subject: [ovirt-users] Hardware critique In-Reply-To: <1436ae5e-a82b-41c5-af14-1d835896c094@email.android.com> References: <1436ae5e-a82b-41c5-af14-1d835896c094@email.android.com> Message-ID: Also keep in mind that extensive logging in the vm's can seriously impact your fs performance, so using a central syslogserver is a really good idea. /tony On 2018-04-06 17:03, Karli Sj?berg wrote: > > > Den 6 apr. 2018 15:46 skrev Jayme : > > Yaniv, > > I appreciate your input, thanks! > > I understand that everyone's use case is different, but I was hoping > to hear from some users that are using oVirt hyper-converged setup > and get some input on the performance.? When I research GlusterFS I > hear a lot about how it can be slow especially when dealing with > small files.? I'm starting to wonder if a straight up NFS server > with a few SSDs would be less hassle and perhaps offer better VM > performance than glusterFS can currently. > > I want to get the best oVirt performance I can get (on somewhat of a > budget) with a fairly small amount of required disk space (under > 2TB).? I'm not sure if hyper-converged setup w/GlusterFS is the > answer or not.? I'd like to avoid spending 15k only to find out that > it's too slow. > > > What is "too slow" for you, what are your expectations? > > Much depending on that, you will find that different goals require > different tools. Like hammering on a screw and all that :) > > /K > > -- Tony Albers Systems administrator, IT-development Royal Danish Library, Victor Albecks Vej 1, 8000 Aarhus C, Denmark. Tel: +45 2566 2383 / +45 8946 2316 From dholler at redhat.com Fri Apr 6 17:43:52 2018 From: dholler at redhat.com (Dominik Holler) Date: Fri, 6 Apr 2018 19:43:52 +0200 Subject: [ovirt-users] External Provider https (unknown error) In-Reply-To: <23bb44c6-6014-2d24-5b2f-22b7f6f41ed9@tngtech.com> References: <23bb44c6-6014-2d24-5b2f-22b7f6f41ed9@tngtech.com> Message-ID: <20180406194352.60af05b9@t460p> On Wed, 4 Apr 2018 13:29:56 +0200 Stefan Wendler wrote: > Hi, > > I am currently trying to attach Glance (OpenStack Image) and Cinder > (OpenStack Volume) as external provider and am facing a problem when > trying to use https in the Provider-URL on an ovirt 3.6 and 4.1 > cluster. > > The Provider-URL I am using is in the form: > https://:9292 (or port 8776 for Cinder - is either a fqdn > or an IP-Address) > > Whenever I press the "Test" button in the "Add Provider" dialog I get > the message "Test Failed (unknown error)." There is no entry in any > logfile whatsoever (at least not in any logs that are associated with > ovirt). I would expect an ssl cert dialog here. I can telnet to the > destination ports from the engine and the nodes so Clance and Cinder > are reachable > > I have also read that this might happen, if there is a corrupted > /var/lib/ovirt-engine/external_truststore > But this file is not even existing and when i create it by hand, it is > not touched. > > How can I get this to work or even get an error message that gives me > a hint where to look? > If there is something logged, it would be in engine.log. Can you please re-check if there is something related logged in engine.log? Are you using authentication? Do you use HTTPS for Glance/Cinder and authentication? From rmeggins at redhat.com Fri Apr 6 18:23:05 2018 From: rmeggins at redhat.com (Rich Megginson) Date: Fri, 6 Apr 2018 12:23:05 -0600 Subject: [ovirt-users] Engine reports In-Reply-To: References: <855bb1c1-33c7-d6ec-f513-5702bc2f736c@redhat.com> Message-ID: <4e975c4c-8492-c2c0-4649-75e1bf8a3163@redhat.com> I'm assuming you are running on a CentOS7 machine, recently updated to the latest base packages. Please confirm. Please provide the output of the following commands: sudo yum repolist sudo rpm -q ansible sudo yum repoquery -i ansible sudo rpm -q openshift-ansible sudo yum repoquery -i openshift-ansible sudo rpm -q origin sudo yum repoquery -i origin sudo cat /usr/share/ansible/openshift-ansible/roles/lib_utils/callback_plugins/aa_version_requirement.py sudo ls -alrtF /etc/origin/logging Please confirm that you followed the steps listed in the link below, including the use of the ansible inventory, vars.yaml.template, and repo files: https://github.com/richm/Main/blob/7e663351dc371b7895564072c7656ebfda45068d/README-install.md On 04/06/2018 03:19 AM, Peter Hudec wrote: > first issue is ansible version, could be solved by virtual env > > FATAL: Current Ansible version (2.4.2.0) is not supported. Supported > versions: 2.4.3.0 or newer > > yum install -y python-virtualenv > virtualenv ansible > . ./ansible/bin/activate > pip install -U pip setuptolls > pip install -U pip setuptools > pip install ansible > > > Second issue is a little bit strange for me > > 2018-04-06 10:00:30,264 p=68226 u=root | Failure summary: > > > 1. Hosts: localhost > Play: OpenShift Aggregated Logging > Task: pulling down signing items from host > Message: ESC[0;31mAll items completedESC[0m > > I have found in logs > > 2018-04-06 10:00:28,356 p=68226 u=root | failed: [localhost] > (item=ca.crl.srl) => { > "changed": false, > "invocation": { > "module_args": { > "src": "/etc/origin/logging/ca.crl.srl" > } > }, > "item": "ca.crl.srl", > "msg": "file not found: /etc/origin/logging/ca.crl.srl" > > > Is this good or bad ? > > Peter > > On 05/04/2018 16:11, Rich Megginson wrote: >> Is it possible that you could start over from scratch, using the latest >> instructions/files at >> https://github.com/ViaQ/Main/pull/37/files? >> >> On 04/05/2018 07:19 AM, Peter Hudec wrote: >>> The version is from >>> >>> /usr/share/ansible/openshift-ansible/roles/openshift_facts/library/openshift_facts.py:get_openshift_version >>> >>> >>> [PROD] root at dipostat01.cnc.sk: /usr/share/ansible/openshift-ansible # >>> /usr/bin/openshift version >>> openshift v3.10.0-alpha.0+f0186dd-401 >>> kubernetes v1.9.1+a0ce1bc657 >>> etcd 3.2.16 >>> >>> this binary is from the origin-3.7.2-1.el7.git.0.f0186dd.x86_64 package >>> >>> [PROD] root at dipostat01.cnc.sk: ~ # rpm -qf /usr/bin/openshift >>> origin-3.7.2-1.el7.git.0.f0186dd.x86_64 >>> >>> Hmm, why the version do not match ? >>> >>> ????Peter >>> >>> On 04/04/2018 17:41, Shirly Radco wrote: >>>> Hi, >>>> >>>> >>>> I have a updated the installation instructions for installing OpenShift >>>> 3.9, based on Rich's work , for the oVirt use case. >>>> >>>> Please make sure where you get the 3.10 rpm and disable that repo. >>>> >>>> This is the PR that includes the metrics store installation of >>>> OpenShift 3.9 >>>> >>>> https://github.com/sradco/ovirt-site/blob/74f1e772c8ca75d4b9e57a3c02cce49c5030f7f7/source/develop/release-management/features/metrics/setting-up-viaq-logging.html.md >>>> >>>> >>>> It should be merged soon, but you can use it to install. >>>> >>>> >>>> Please make sure to add the?ansible-inventory-origin-39-aio file as >>>> described below. >>>> These are required parameters for the ansible playbook. >>>> >>>> >>>> Best regards, >>>> >>>> -- >>>> >>>> SHIRLY?RADCO >>>> >>>> BI SeNIOR SOFTWARE ENGINEER >>>> >>>> Red Hat?Israel >>>> >>>> >>>> TRIED. TESTED. TRUSTED. >>>> >>>> >>>> On Wed, Apr 4, 2018 at 5:41 PM, Rich Megginson >>> > wrote: >>>> >>>> ???? I'm sorry.? I misunderstood the request. >>>> >>>> ???? We are in the process of updating the instructions for installing >>>> ???? viaq logging based on upstream origin 3.9 - >>>> ???? https://github.com/ViaQ/Main/pull/37 >>>> ???? >>>> >>>> ???? In the meantime, you can follow along on that PR, and we will have >>>> ???? instructions very soon. >>>> >>>> >>>> ???? On 04/04/2018 08:26 AM, Rich Megginson wrote: >>>> >>>> ???????? On 04/04/2018 08:22 AM, Shirly Radco wrote: >>>> >>>> >>>> >>>> ???????????? -- >>>> >>>> ???????????? SHIRLY RADCO >>>> >>>> ???????????? BI SeNIOR SOFTWARE ENGINEER >>>> >>>> ???????????? Red Hat Israel >>>> >>>> ???????????? >>>> ???????????? TRIED. TESTED. TRUSTED. >>>> >>>> >>>> ???????????? On Wed, Apr 4, 2018 at 5:07 PM, Peter Hudec >>> ???????????? >>> ???????????? >> wrote: >>>> >>>> ???????????? ??? almost the same issue, the versio for openshoft release >>>> ???????????? changed to 3.9 >>>> >>>> ???????????? ??? Failure summary: >>>> >>>> >>>> ???????????? ??? ? 1. Hosts:? ? localhost >>>> ???????????? ??? ? ? ?Play:? ? ?Determine openshift_version to configure >>>> ???????????? on first >>>> ???????????? ??? master >>>> ???????????? ??? ? ? ?Task:? ? ?For an RPM install, abort when the >>>> release >>>> ???????????? ??? requested does >>>> ???????????? ??? not match the available version. >>>> ???????????? ??? ? ? ?Message:? You requested openshift_release 3.9, >>>> ???????????? which is not >>>> ???????????? ??? matched by >>>> ???????????? ??? ? ? ? ? ? ? ? ?the latest OpenShift RPM we detected as >>>> ???????????? origin-3.10.0 >>>> ???????????? ??? ? ? ? ? ? ? ? ?on host localhost. >>>> ???????????? ??? ? ? ? ? ? ? ? ?We will only install the latest RPMs, so >>>> ???????????? please ensure >>>> ???????????? ??? you are getting the release >>>> ???????????? ??? ? ? ? ? ? ? ? ?you expect. You may need to adjust your >>>> ???????????? Ansible >>>> ???????????? ??? inventory, modify the repositories >>>> ???????????? ??? ? ? ? ? ? ? ? ?available on the host, or run the >>>> ???????????? appropriate OpenShift >>>> ???????????? ??? upgrade playbook. >>>> >>>> >>>> ???????????? What is the rpm version installed of OpenShift?origin? >>>> ???????????? Do you perhaps have another repo that includes the >>>> OpenShift >>>> ???????????? origin-3.10.0? >>>> >>>> >>>> ???????? origin is the upstream version of OpenShift, which is >>>> unsupported. >>>> >>>> ???????? sudo repoquery -i origin >>>> >>>> ???????? This will tell you which repo it came from >>>> >>>> ???????? You will need to disable that repo and uninstall any packages >>>> ???????? which came from that repo >>>> >>>> ???????? Another mystery is why it is trying to install origin in the >>>> ???????? first place.? openshift-ansible with >>>> ???????? openshift_deployment_type=openshift-enterprise should not >>>> try to >>>> ???????? install origin, it should install packages with names like >>>> ???????? atomic-openshift-master, atomic-openshift-node, etc. >>>> >>>> >>>> >>>> >>>> ???????????? ??? On 04/04/2018 14:18, Shirly Radco wrote: >>>> ???????????? ??? > Adding Nicolas since he hit the same issue. >>>> ???????????? ??? > >>>> ???????????? ??? > -- >>>> ???????????? ??? > >>>> ???????????? ??? > SHIRLY?RADCO >>>> ???????????? ??? > >>>> ???????????? ??? > BI SeNIOR SOFTWARE ENGINEER >>>> ???????????? ??? > >>>> ???????????? ??? > Red Hat?Israel >>>> ???????????? ??? > >>>> ???????????? ??? > >>>> ???????????? ??? > TRIED. TESTED. TRUSTED. >>>> ???????????? ??? > >>>> ???????????? ??? > >>>> ???????????? ??? > On Wed, Apr 4, 2018 at 3:17 PM, Shirly Radco >>>> ???????????? >>>> ???????????? > >>>> ???????????? ??? > >>>> ???????????? >>> >>>> wrote: >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?Hi Peter, >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?The installation instructions currently support >>>> ???????????? OpenShift 3.6. >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?I'm now working on updating them to support 3.9. >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?You currently have 3.10 installed. >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?Please install OpenShift 3.9 using this >>>> repository >>>> ???????????? ??? > >>>> ???????????? https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo >>>> >>>> >>>> ???????????? >>> >>>> > >>>> ???????????? ??? > >>>> >>>> ?>>> >>>> >>>> ???????????? >>> >>>> >> >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?And add the following file to your vm >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?Run: >>>> ???????????? ??? >? ? ?vi /root/ansible-inventory-origin-39-aio >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?Add: >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?-------------- >>>> ???????????? ??? >? ? ?[OSEv3:children] >>>> ???????????? ??? >? ? ?nodes >>>> ???????????? ??? >? ? ?masters >>>> ???????????? ??? >? ? ?etcd >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?[OSEv3:vars] >>>> ???????????? ??? >? ? ?ansible_connection=local >>>> ???????????? ??? >? ? ?openshift_release=v3.9 >>>> ???????????? ??? >? ? ?openshift_logging_install_logging=true >>>> ???????????? ??? >? ? ?short_version=3.9 >>>> ???????????? ??? >? ? ?openshift_deployment_type=origin >>>> ???????????? ??? > >>>> ???????????? ?openshift_master_identity_providers=[{'mappingMethod': >>>> ???????????? 'lookup', >>>> ???????????? ??? >? ? ?'challenge': 'true', 'login': 'true', 'kind': >>>> ???????????? ??? >? ? ?'AllowAllPasswordIdentityProvider', 'name': >>>> ???????????? 'allow_all'}] >>>> ???????????? ??? >? ? ?# bug - doesn't use correct tag >>>> ???????????? ??? >? ? ?openshift_logging_image_version=v3.9 >>>> ???????????? ??? > >>>> ???????????? ?openshift_logging_elasticsearch_proxy_image_version=v1.0.0 >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?openshift_logging_es_allow_external=True >>>> ???????????? ??? >? ? ?openshift_logging_use_mux=True >>>> ???????????? ??? >? ? ?openshift_logging_mux_allow_external=True >>>> ???????????? ??? > >>>> ?openshift_logging_mux_file_buffer_storage_type=hostmount >>>> ???????????? ??? > >>>> ?openshift_logging_elasticsearch_storage_type=hostmount >>>> ???????????? ??? > >>>> >>>> ?openshift_logging_elasticsearch_hostmount_path=/var/lib/elasticsearch >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?[nodes] >>>> ???????????? ??? >? ? ?localhost storage=True >>>> ???????????? openshift_node_labels="{'region': >>>> ???????????? ??? 'infra'}" >>>> ???????????? ??? >? ? ?openshift_schedulable=True >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?[masters] >>>> ???????????? ??? >? ? ?localhost storage=True >>>> ???????????? openshift_node_labels="{'region': >>>> ???????????? ??? 'infra'}" >>>> ???????????? ??? >? ? ?openshift_schedulable=True >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?[etcd] >>>> ???????????? ??? >? ? ?localhost storage=True >>>> ???????????? openshift_node_labels="{'region': >>>> ???????????? ??? 'infra'}" >>>> ???????????? ??? >? ? ?openshift_schedulable=True >>>> ???????????? ??? > >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?------------ >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?Save and exit. >>>> ???????????? ??? > >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?***Please make sure that you use /var as your >>>> ???????????? Elasticsearch >>>> ???????????? ??? >? ? ?persistent storage directory. >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?And when you run the OpenShift ansible >>>> ???????????? ??? > >>>> >>>> ?(https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible >>>> >>>> >>>> >>>> >>>> >>>> >>> >>>> >>>> > >>>> >>>> ???????????? ??? > >>>> >>>> ?>>> >>>> >>>> >>>> >>>> >>>> >>> >>>> >>>> >>) >>>> >>>> ???????????? ??? >? ? ?use the file you just created like this: >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?# cd /usr/share/ansible/openshift-ansible >>>> ???????????? ??? >? ? ?# (or wherever you cloned the git repo if >>>> using git) >>>> ???????????? ??? >? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log >>>> ansible-playbook >>>> ???????????? -vvv -e >>>> ???????????? ??? >? ? ?@/root/vars.yaml -i >>>> ???????????? /root/*ansible-inventory-origin-39-aio* >>>> ???????????? ??? >? ? ?playbooks/byo/config.yml >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?Best regards, >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?-- >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?SHIRLY?RADCO >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?BI SeNIOR SOFTWARE ENGINEER >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?Red Hat?Israel >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ? >>>> ???????????? ??? >? ? ?TRIED. TESTED. TRUSTED. >>>> >>>> ???????????? ??? > >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ?On Wed, Apr 4, 2018 at 12:17 PM, Peter Hudec >>>> ???????????? >>> ???????????? > >>>> ???????????? ??? >? ? ? >>>> ???????????? >>> wrote: >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ? ? ?Tried to install ovirt metrics, but got error >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log >>>> ???????????? ansible-playbook -vvv -e >>>> ???????????? ??? >? ? ? ? ?@/root/vars.yaml -i >>>> ???????????? /root/ansible-inventory-origin-37-aio >>>> ???????????? ??? >? ? ? ? ?playbooks/byo/config.yml >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ? ? ?? 1. Hosts:? ? localhost >>>> ???????????? ??? >? ? ? ? ?? ? ?Play:? ? ?Determine openshift_version to >>>> ???????????? configure >>>> ???????????? ??? on first >>>> ???????????? ??? >? ? ? ? ?master >>>> ???????????? ??? >? ? ? ? ?? ? ?Task:? ? ?For an RPM install, abort when >>>> ???????????? the release >>>> ???????????? ??? >? ? ? ? ?requested does >>>> ???????????? ??? >? ? ? ? ?not match the available version. >>>> ???????????? ??? >? ? ? ? ?? ? ?Message:? You requested >>>> openshift_release >>>> ???????????? 3.7, >>>> ???????????? ??? which is not >>>> ???????????? ??? >? ? ? ? ?matched by >>>> ???????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?the latest OpenShift RPM we >>>> ???????????? detected as >>>> ???????????? ??? origin-3.10.0 >>>> ???????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?on host localhost. >>>> ???????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?We will only install the >>>> latest >>>> ???????????? RPMs, so >>>> ???????????? ??? please >>>> ???????????? ??? >? ? ? ? ?ensure >>>> ???????????? ??? >? ? ? ? ?you are getting the release >>>> ???????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?you expect. You may need to >>>> ???????????? adjust your >>>> ???????????? ??? Ansible >>>> ???????????? ??? >? ? ? ? ?inventory, modify the repositories >>>> ???????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?available on the host, or run >>>> ???????????? the appropriate >>>> ???????????? ??? >? ? ? ? ?OpenShift >>>> ???????????? ??? >? ? ? ? ?upgrade playbook. >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ? ? ?? ? ? ? regards >>>> ???????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ? Peter >>>> ???????????? ??? > >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ? ? ?On 04/04/2018 09:13, Fred Rolland wrote: >>>> ???????????? ??? >? ? ? ? ?> Hi, >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? ??? >? ? ? ? ?> Check these links: >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? ??? >? ? ? ? ?> >>>> >>>> https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ >>>> >>>> >>>> ???????????? >>> >>>> > >>>> ???????????? ??? > >>>> >>>> ?>>> >>>> >>>> ???????????? >>> >>>> >> >>>> ???????????? ??? >? ? ? ? ?> >>>> >>>> https://ovirt.org/develop/release-management/features/metrics/metrics-store/ >>>> >>>> >>>> >>>> >>>> >>>> >>> >>>> >>>> > >>>> >>>> ???????????? ??? > >>>> >>>> ?>>> >>>> >>>> >>>> >>>> >>>> >>> >>>> >>>> >> >>>> >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? ??? >? ? ? ? ?> Regards, >>>> ???????????? ??? >? ? ? ? ?> Fred >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? ??? >? ? ? ? ?> On Tue, Apr 3, 2018 at 9:38 AM, Anantha >>>> Raghava >>>> ???????????? ??? >? ? ? ? ?> >>> ???????????? >>>> ???????????? ??? >>> ???????????? > >>>> ???????????? ??? >? ? ? ? ?>>> ???????????? >>>> ???????????? ??? >>> ???????????? >> >>>> ???????????? ??? >? ? ? ? ?>>> ???????????? >>>> ???????????? ??? >>> ???????????? > >>>> ???????????? ??? >? ? ? ? ?>>> ???????????? >>>> ???????????? ??? >>> ???????????? >>>> >>>> ???????????? ??? >? ? ? ? ?> wrote: >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? ??? >? ? ? ? ?>? ? ?Hi, >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? ??? >? ? ? ? ?>? ? ?I see that oVirt DWH is installed with >>>> ???????????? Version >>>> ???????????? ??? 4.2.x. Now, how do I >>>> ???????????? ??? >? ? ? ? ?>? ? ?take the reports? I version 3.5, we had >>>> ???????????? Jasper >>>> ???????????? ??? reports module using >>>> ???????????? ??? >? ? ? ? ?>? ? ?which we could take utilization >>>> reports. >>>> ???????????? Can we do >>>> ???????????? ??? something similar >>>> ???????????? ??? >? ? ? ? ?>? ? ?here? >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? ??? >? ? ? ? ?>? ? ?-- >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? ??? >? ? ? ? ?>? ? ?Thanks & Regards, >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? ??? >? ? ? ? ?>? ? ?Anantha Raghava >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? ??? >? ? ? ? ?>? ? ?Do not print this e-mail unless >>>> ???????????? required. Save >>>> ???????????? ??? Paper & trees. >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? ??? >? ? ? ? ?> >>>> ?_______________________________________________ >>>> ???????????? ??? >? ? ? ? ?>? ? ?Users mailing list >>>> ???????????? ??? >? ? ? ? ?> Users at ovirt.org >>>> ???????????? > >>>> ???????????? ??? >>>> ???????????? >> >>>> ???????????? ??? >? ? ? ? ?>>> ???????????? >>> ???????????? > >>>> ???????????? ??? >>>> ???????????? >>> >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? http://lists.ovirt.org/mailman/listinfo/users >>>> ???????????? >>>> ???????????? ??? >>> ???????????? > >>>> ???????????? ??? > ?>>> ???????????? >>>> ???????????? ??? >>> ???????????? >> >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? ?>>> ???????????? >>>> ???????????? ??? >>> ???????????? > >>>> ???????????? ??? > ?>>> ???????????? >>>> ???????????? >>> ???????????? >>> >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? ??? >? ? ? ? ?> >>>> _______________________________________________ >>>> ???????????? ??? >? ? ? ? ?> Users mailing list >>>> ???????????? ??? >? ? ? ? ?> Users at ovirt.org >>>> ???????????? > >>>> ???????????? ??? >>>> ???????????? >> >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? http://lists.ovirt.org/mailman/listinfo/users >>>> ???????????? >>>> ???????????? ??? >>> ???????????? > >>>> ???????????? ??? > ?>>> ???????????? >>>> ???????????? ??? >>> ???????????? >> >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? ??? > >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ? ? ?-- >>>> ???????????? ??? >? ? ? ? ?*Peter Hudec* >>>> ???????????? ??? >? ? ? ? ?Infra?trukt?rny architekt >>>> ???????????? ??? > phudec at cnc.sk >>>> ???????????? > >>>> ???????????? >>>> ???????????? ??? >> >>>> ???????????? >>>> ???????????? > >>>> ???????????? ??? >?????? ? >>>> ???????????? >>> >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ? ? ?*CNC,?a.s.* >>>> ???????????? ??? >? ? ? ? ?Borsk? 6,?841 04 Bratislava >>>> ???????????? ??? >? ? ? ? ?Recepcia:?+421 2? 35 000 100 >>>> ???????????? ??? > >>>> ???????????? ??? >? ? ? ? ?Mobil:+421?905 997 203 >>>> ???????????? ??? >? ? ? ? ?*www.cnc.sk >>>> ???????????? * >>>> ???????????? ??? >>>> >>>> ???????????? ??? >? ? ? ? ?> >>>> ???????????? ??? > >>>> ???????????? ??? > >>>> ?_______________________________________________ >>>> ???????????? ??? >? ? ? ? ?Users mailing list >>>> ???????????? ??? > Users at ovirt.org >>>> ???????????? > >>>> ???????????? >>>> ???????????? ??? >> >>>> ???????????? ??? > http://lists.ovirt.org/mailman/listinfo/users >>>> ???????????? >>>> ???????????? ??? >>> ???????????? > >>>> ???????????? ??? > ?>>> ???????????? >>>> ???????????? ??? >>> ???????????? >> >>>> ???????????? ??? > >>>> ???????????? ??? > >>>> ???????????? ??? > >>>> >>>> >>>> ???????????? ??? -- >>>> ???????????? ??? *Peter Hudec* >>>> ???????????? ??? Infra?trukt?rny architekt >>>> ???????????? ??? phudec at cnc.sk >>>> ???????????? > >>>> ???????????? >>>> ???????????? ??? >> >>>> >>>> ???????????? ??? *CNC,?a.s.* >>>> ???????????? ??? Borsk? 6,?841 04 Bratislava >>>> ???????????? ??? Recepcia:?+421 2? 35 000 100 >>>> >>>> ???????????? ??? Mobil:+421?905 997 203 >>>> ???????????? ??? *www.cnc.sk * >>>> ???????????? >>>> ???????????? ??? > >>>> >>>> >>>> >>>> >>>> > From phudec at cnc.sk Fri Apr 6 21:08:09 2018 From: phudec at cnc.sk (Peter Hudec) Date: Fri, 6 Apr 2018 23:08:09 +0200 Subject: [ovirt-users] Engine reports In-Reply-To: <4e975c4c-8492-c2c0-4649-75e1bf8a3163@redhat.com> References: <855bb1c1-33c7-d6ec-f513-5702bc2f736c@redhat.com> <4e975c4c-8492-c2c0-4649-75e1bf8a3163@redhat.com> Message-ID: <70243db2-b0e4-55f6-eef9-43a9f5f16c29@cnc.sk> Hi, https://tools.apps.hudecof.net/paste/view/1d493d52 The difference is - I used latest ansible 2.5 from PIPY source, since the RPM package do not fit requirements - I used GIT repo for openshift-ansible. I could start it over with the RPM based openshift-ansible Peter On 06/04/2018 20:23, Rich Megginson wrote: > I'm assuming you are running on a CentOS7 machine, recently updated to > the latest base packages. Please confirm. > > Please provide the output of the following commands: > > sudo yum repolist > > sudo rpm -q ansible > > sudo yum repoquery -i ansible > > sudo rpm -q openshift-ansible > > sudo yum repoquery -i openshift-ansible > > sudo rpm -q origin > > sudo yum repoquery -i origin > > sudo cat > /usr/share/ansible/openshift-ansible/roles/lib_utils/callback_plugins/aa_version_requirement.py > > > sudo ls -alrtF /etc/origin/logging > > Please confirm that you followed the steps listed in the link below, > including the use of the ansible inventory, vars.yaml.template, and repo > files: > https://github.com/richm/Main/blob/7e663351dc371b7895564072c7656ebfda45068d/README-install.md > > > On 04/06/2018 03:19 AM, Peter Hudec wrote: >> first issue is ansible version, could be solved by virtual env >> >> FATAL: Current Ansible version (2.4.2.0) is not supported. Supported >> versions: 2.4.3.0 or newer >> >> yum install -y python-virtualenv >> virtualenv ansible >> . ./ansible/bin/activate >> pip install -U pip setuptolls >> pip install -U pip setuptools >> pip install ansible >> >> >> Second issue is a little bit strange for me >> >> 2018-04-06 10:00:30,264 p=68226 u=root |? Failure summary: >> >> >> ?? 1. Hosts:??? localhost >> ????? Play:???? OpenShift Aggregated Logging >> ????? Task:???? pulling down signing items from host >> ????? Message:? ESC[0;31mAll items completedESC[0m >> >> I have found in logs >> >> 2018-04-06 10:00:28,356 p=68226 u=root |? failed: [localhost] >> (item=ca.crl.srl) => { >> ???? "changed": false, >> ???? "invocation": { >> ???????? "module_args": { >> ???????????? "src": "/etc/origin/logging/ca.crl.srl" >> ???????? } >> ???? }, >> ???? "item": "ca.crl.srl", >> ???? "msg": "file not found: /etc/origin/logging/ca.crl.srl" >> >> >> Is this good or bad ? >> >> ????Peter >> >> On 05/04/2018 16:11, Rich Megginson wrote: >>> Is it possible that you could start over from scratch, using the latest >>> instructions/files at >>> https://github.com/ViaQ/Main/pull/37/files? >>> >>> On 04/05/2018 07:19 AM, Peter Hudec wrote: >>>> The version is from >>>> >>>> /usr/share/ansible/openshift-ansible/roles/openshift_facts/library/openshift_facts.py:get_openshift_version >>>> >>>> >>>> >>>> [PROD] root at dipostat01.cnc.sk: /usr/share/ansible/openshift-ansible # >>>> /usr/bin/openshift version >>>> openshift v3.10.0-alpha.0+f0186dd-401 >>>> kubernetes v1.9.1+a0ce1bc657 >>>> etcd 3.2.16 >>>> >>>> this binary is from the origin-3.7.2-1.el7.git.0.f0186dd.x86_64 package >>>> >>>> [PROD] root at dipostat01.cnc.sk: ~ # rpm -qf /usr/bin/openshift >>>> origin-3.7.2-1.el7.git.0.f0186dd.x86_64 >>>> >>>> Hmm, why the version do not match ? >>>> >>>> ?????Peter >>>> >>>> On 04/04/2018 17:41, Shirly Radco wrote: >>>>> Hi, >>>>> >>>>> >>>>> I have a updated the installation instructions for installing >>>>> OpenShift >>>>> 3.9, based on Rich's work , for the oVirt use case. >>>>> >>>>> Please make sure where you get the 3.10 rpm and disable that repo. >>>>> >>>>> This is the PR that includes the metrics store installation of >>>>> OpenShift 3.9 >>>>> >>>>> https://github.com/sradco/ovirt-site/blob/74f1e772c8ca75d4b9e57a3c02cce49c5030f7f7/source/develop/release-management/features/metrics/setting-up-viaq-logging.html.md >>>>> >>>>> >>>>> >>>>> It should be merged soon, but you can use it to install. >>>>> >>>>> >>>>> Please make sure to add the?ansible-inventory-origin-39-aio file as >>>>> described below. >>>>> These are required parameters for the ansible playbook. >>>>> >>>>> >>>>> Best regards, >>>>> >>>>> --? >>>>> >>>>> SHIRLY?RADCO >>>>> >>>>> BI SeNIOR SOFTWARE ENGINEER >>>>> >>>>> Red Hat?Israel >>>>> >>>>> >>>>> TRIED. TESTED. TRUSTED. >>>>> >>>>> >>>>> On Wed, Apr 4, 2018 at 5:41 PM, Rich Megginson >>>> > wrote: >>>>> >>>>> ????? I'm sorry.? I misunderstood the request. >>>>> >>>>> ????? We are in the process of updating the instructions for >>>>> installing >>>>> ????? viaq logging based on upstream origin 3.9 - >>>>> ????? https://github.com/ViaQ/Main/pull/37 >>>>> ????? >>>>> >>>>> ????? In the meantime, you can follow along on that PR, and we will >>>>> have >>>>> ????? instructions very soon. >>>>> >>>>> >>>>> ????? On 04/04/2018 08:26 AM, Rich Megginson wrote: >>>>> >>>>> ????????? On 04/04/2018 08:22 AM, Shirly Radco wrote: >>>>> >>>>> >>>>> >>>>> ????????????? -- >>>>> >>>>> ????????????? SHIRLY RADCO >>>>> >>>>> ????????????? BI SeNIOR SOFTWARE ENGINEER >>>>> >>>>> ????????????? Red Hat Israel >>>>> >>>>> ????????????? >>>>> ????????????? TRIED. TESTED. TRUSTED. >>>>> >>>>> >>>>> ????????????? On Wed, Apr 4, 2018 at 5:07 PM, Peter Hudec >>>>> >>>> ????????????? >>>> ????????????? >> wrote: >>>>> >>>>> ????????????? ??? almost the same issue, the versio for openshoft >>>>> release >>>>> ????????????? changed to 3.9 >>>>> >>>>> ????????????? ??? Failure summary: >>>>> >>>>> >>>>> ????????????? ??? ? 1. Hosts:? ? localhost >>>>> ????????????? ??? ? ? ?Play:? ? ?Determine openshift_version to >>>>> configure >>>>> ????????????? on first >>>>> ????????????? ??? master >>>>> ????????????? ??? ? ? ?Task:? ? ?For an RPM install, abort when the >>>>> release >>>>> ????????????? ??? requested does >>>>> ????????????? ??? not match the available version. >>>>> ????????????? ??? ? ? ?Message:? You requested openshift_release 3.9, >>>>> ????????????? which is not >>>>> ????????????? ??? matched by >>>>> ????????????? ??? ? ? ? ? ? ? ? ?the latest OpenShift RPM we >>>>> detected as >>>>> ????????????? origin-3.10.0 >>>>> ????????????? ??? ? ? ? ? ? ? ? ?on host localhost. >>>>> ????????????? ??? ? ? ? ? ? ? ? ?We will only install the latest >>>>> RPMs, so >>>>> ????????????? please ensure >>>>> ????????????? ??? you are getting the release >>>>> ????????????? ??? ? ? ? ? ? ? ? ?you expect. You may need to adjust >>>>> your >>>>> ????????????? Ansible >>>>> ????????????? ??? inventory, modify the repositories >>>>> ????????????? ??? ? ? ? ? ? ? ? ?available on the host, or run the >>>>> ????????????? appropriate OpenShift >>>>> ????????????? ??? upgrade playbook. >>>>> >>>>> >>>>> ????????????? What is the rpm version installed of OpenShift?origin? >>>>> ????????????? Do you perhaps have another repo that includes the >>>>> OpenShift >>>>> ????????????? origin-3.10.0? >>>>> >>>>> >>>>> ????????? origin is the upstream version of OpenShift, which is >>>>> unsupported. >>>>> >>>>> ????????? sudo repoquery -i origin >>>>> >>>>> ????????? This will tell you which repo it came from >>>>> >>>>> ????????? You will need to disable that repo and uninstall any >>>>> packages >>>>> ????????? which came from that repo >>>>> >>>>> ????????? Another mystery is why it is trying to install origin in the >>>>> ????????? first place.? openshift-ansible with >>>>> ????????? openshift_deployment_type=openshift-enterprise should not >>>>> try to >>>>> ????????? install origin, it should install packages with names like >>>>> ????????? atomic-openshift-master, atomic-openshift-node, etc. >>>>> >>>>> >>>>> >>>>> >>>>> ????????????? ??? On 04/04/2018 14:18, Shirly Radco wrote: >>>>> ????????????? ??? > Adding Nicolas since he hit the same issue. >>>>> ????????????? ??? > >>>>> ????????????? ??? > -- >>>>> ????????????? ??? > >>>>> ????????????? ??? > SHIRLY?RADCO >>>>> ????????????? ??? > >>>>> ????????????? ??? > BI SeNIOR SOFTWARE ENGINEER >>>>> ????????????? ??? > >>>>> ????????????? ??? > Red Hat?Israel >>>>> ????????????? ??? > >>>>> ????????????? ??? > >>>>> ????????????? ??? > TRIED. TESTED. TRUSTED. >>>>> >>>>> ????????????? ??? > >>>>> ????????????? ??? > >>>>> ????????????? ??? > On Wed, Apr 4, 2018 at 3:17 PM, Shirly Radco >>>>> ????????????? >>>>> ????????????? > >>>>> ????????????? ??? > >>>> >>>>> ????????????? >>> >>>>> wrote: >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?Hi Peter, >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?The installation instructions currently >>>>> support >>>>> ????????????? OpenShift 3.6. >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?I'm now working on updating them to support >>>>> 3.9. >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?You currently have 3.10 installed. >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?Please install OpenShift 3.9 using this >>>>> repository >>>>> ????????????? ??? > >>>>> ????????????? >>>>> https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo >>>>> ???????????? >>>>> >>>>> ????????????? >>>>> >>>> ???????????? >>>>> > >>>>> ????????????? ??? > >>>>> ???????????? >>>>> ??>>>> ???????????? >>>>> >>>>> ????????????? >>>>> >>>> ???????????? >>>>> >> >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?And add the following file to your vm >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?Run: >>>>> ????????????? ??? >? ? ?vi /root/ansible-inventory-origin-39-aio >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?Add: >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?-------------- >>>>> ????????????? ??? >? ? ?[OSEv3:children] >>>>> ????????????? ??? >? ? ?nodes >>>>> ????????????? ??? >? ? ?masters >>>>> ????????????? ??? >? ? ?etcd >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?[OSEv3:vars] >>>>> ????????????? ??? >? ? ?ansible_connection=local >>>>> ????????????? ??? >? ? ?openshift_release=v3.9 >>>>> ????????????? ??? >? ? ?openshift_logging_install_logging=true >>>>> ????????????? ??? >? ? ?short_version=3.9 >>>>> ????????????? ??? >? ? ?openshift_deployment_type=origin >>>>> ????????????? ??? > >>>>> ????????????? ?openshift_master_identity_providers=[{'mappingMethod': >>>>> ????????????? 'lookup', >>>>> ????????????? ??? >? ? ?'challenge': 'true', 'login': 'true', 'kind': >>>>> ????????????? ??? >? ? ?'AllowAllPasswordIdentityProvider', 'name': >>>>> ????????????? 'allow_all'}] >>>>> ????????????? ??? >? ? ?# bug - doesn't use correct tag >>>>> ????????????? ??? >? ? ?openshift_logging_image_version=v3.9 >>>>> ????????????? ??? > >>>>> ????????????? >>>>> ?openshift_logging_elasticsearch_proxy_image_version=v1.0.0 >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?openshift_logging_es_allow_external=True >>>>> ????????????? ??? >? ? ?openshift_logging_use_mux=True >>>>> ????????????? ??? >? ? ?openshift_logging_mux_allow_external=True >>>>> ????????????? ??? > >>>>> ??openshift_logging_mux_file_buffer_storage_type=hostmount >>>>> ????????????? ??? > >>>>> ??openshift_logging_elasticsearch_storage_type=hostmount >>>>> ????????????? ??? > >>>>> ???????????? >>>>> ??openshift_logging_elasticsearch_hostmount_path=/var/lib/elasticsearch >>>>> >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?[nodes] >>>>> ????????????? ??? >? ? ?localhost storage=True >>>>> ????????????? openshift_node_labels="{'region': >>>>> ????????????? ??? 'infra'}" >>>>> ????????????? ??? >? ? ?openshift_schedulable=True >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?[masters] >>>>> ????????????? ??? >? ? ?localhost storage=True >>>>> ????????????? openshift_node_labels="{'region': >>>>> ????????????? ??? 'infra'}" >>>>> ????????????? ??? >? ? ?openshift_schedulable=True >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?[etcd] >>>>> ????????????? ??? >? ? ?localhost storage=True >>>>> ????????????? openshift_node_labels="{'region': >>>>> ????????????? ??? 'infra'}" >>>>> ????????????? ??? >? ? ?openshift_schedulable=True >>>>> ????????????? ??? > >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?------------ >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?Save and exit. >>>>> ????????????? ??? > >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?***Please make sure that you use /var as your >>>>> ????????????? Elasticsearch >>>>> ????????????? ??? >? ? ?persistent storage directory. >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?And when you run the OpenShift ansible >>>>> ????????????? ??? > >>>>> ???????????? >>>>> ??(https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible >>>>> >>>>> >>>>> ???????????? >>>>> >>>>> >>>>> >>>>> ???????????? >>>>> >>>> >>>>> >>>>> ???????????? >>>>> > >>>>> >>>>> >>>>> ????????????? ??? > >>>>> ???????????? >>>>> ??>>>> >>>>> >>>>> ???????????? >>>>> >>>>> >>>>> >>>>> ???????????? >>>>> >>>> >>>>> >>>>> ???????????? >>>>> >>) >>>>> >>>>> >>>>> ????????????? ??? >? ? ?use the file you just created like this: >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?# cd /usr/share/ansible/openshift-ansible >>>>> ????????????? ??? >? ? ?# (or wherever you cloned the git repo if >>>>> using git) >>>>> ????????????? ??? >? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log >>>>> ansible-playbook >>>>> ????????????? -vvv -e >>>>> ????????????? ??? >? ? ?@/root/vars.yaml -i >>>>> ????????????? /root/*ansible-inventory-origin-39-aio* >>>>> ????????????? ??? >? ? ?playbooks/byo/config.yml >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?Best regards, >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?-- >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?SHIRLY?RADCO >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?BI SeNIOR SOFTWARE ENGINEER >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?Red Hat?Israel >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ? >>>>> ????????????? ??? >? ? ?TRIED. TESTED. TRUSTED. >>>>> >>>>> ????????????? ??? > >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ?On Wed, Apr 4, 2018 at 12:17 PM, Peter Hudec >>>>> ????????????? >>>>> >>>> ????????????? > >>>>> ????????????? ??? >? ? ? >>>>> ????????????? >>> wrote: >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ? ? ?Tried to install ovirt metrics, but got >>>>> error >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log >>>>> ????????????? ansible-playbook -vvv -e >>>>> ????????????? ??? >? ? ? ? ?@/root/vars.yaml -i >>>>> ????????????? /root/ansible-inventory-origin-37-aio >>>>> ????????????? ??? >? ? ? ? ?playbooks/byo/config.yml >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ? ? ?? 1. Hosts:? ? localhost >>>>> ????????????? ??? >? ? ? ? ?? ? ?Play:? ? ?Determine >>>>> openshift_version to >>>>> ????????????? configure >>>>> ????????????? ??? on first >>>>> ????????????? ??? >? ? ? ? ?master >>>>> ????????????? ??? >? ? ? ? ?? ? ?Task:? ? ?For an RPM install, >>>>> abort when >>>>> ????????????? the release >>>>> ????????????? ??? >? ? ? ? ?requested does >>>>> ????????????? ??? >? ? ? ? ?not match the available version. >>>>> ????????????? ??? >? ? ? ? ?? ? ?Message:? You requested >>>>> openshift_release >>>>> ????????????? 3.7, >>>>> ????????????? ??? which is not >>>>> ????????????? ??? >? ? ? ? ?matched by >>>>> ????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?the latest OpenShift RPM we >>>>> ????????????? detected as >>>>> ????????????? ??? origin-3.10.0 >>>>> ????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?on host localhost. >>>>> ????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?We will only install the >>>>> latest >>>>> ????????????? RPMs, so >>>>> ????????????? ??? please >>>>> ????????????? ??? >? ? ? ? ?ensure >>>>> ????????????? ??? >? ? ? ? ?you are getting the release >>>>> ????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?you expect. You may need to >>>>> ????????????? adjust your >>>>> ????????????? ??? Ansible >>>>> ????????????? ??? >? ? ? ? ?inventory, modify the repositories >>>>> ????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?available on the host, >>>>> or run >>>>> ????????????? the appropriate >>>>> ????????????? ??? >? ? ? ? ?OpenShift >>>>> ????????????? ??? >? ? ? ? ?upgrade playbook. >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ? ? ?? ? ? ? regards >>>>> ????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ? Peter >>>>> ????????????? ??? > >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ? ? ?On 04/04/2018 09:13, Fred Rolland wrote: >>>>> ????????????? ??? >? ? ? ? ?> Hi, >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? ??? >? ? ? ? ?> Check these links: >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ???????????????????????????? >>>>> https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ >>>>> ???????????? >>>>> >>>>> ????????????? >>>>> >>>> ???????????? >>>>> > >>>>> ????????????? ??? > >>>>> ???????????? >>>>> ??>>>> ???????????? >>>>> >>>>> ????????????? >>>>> >>>> ???????????? >>>>> >> >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ???????????? >>>>> https://ovirt.org/develop/release-management/features/metrics/metrics-store/ >>>>> >>>>> >>>>> ???????????? >>>>> >>>>> >>>>> >>>>> ???????????? >>>>> >>>> >>>>> >>>>> ???????????? >>>>> > >>>>> >>>>> >>>>> ????????????? ??? > >>>>> ???????????? >>>>> ??>>>> >>>>> >>>>> ???????????? >>>>> >>>>> >>>>> >>>>> ???????????? >>>>> >>>> >>>>> >>>>> ???????????? >>>>> >> >>>>> >>>>> >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? ??? >? ? ? ? ?> Regards, >>>>> ????????????? ??? >? ? ? ? ?> Fred >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? ??? >? ? ? ? ?> On Tue, Apr 3, 2018 at 9:38 AM, Anantha >>>>> Raghava >>>>> ????????????? ??? >? ? ? ? ?> >>>> ????????????? >>>>> ????????????? ??? >>>> ????????????? > >>>>> ????????????? ??? >? ? ? ? ?>>>> ????????????? >>>>> ????????????? ??? >>>> ????????????? >> >>>>> ????????????? ??? >? ? ? ? ?>>>> ????????????? >>>>> ????????????? ??? >>>> ????????????? > >>>>> ????????????? ??? >? ? ? ? ?>>>> ????????????? >>>>> ????????????? ??? >>>> ????????????? >>>> >>>>> ????????????? ??? >? ? ? ? ?> wrote: >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? ??? >? ? ? ? ?>? ? ?Hi, >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? ??? >? ? ? ? ?>? ? ?I see that oVirt DWH is installed >>>>> with >>>>> ????????????? Version >>>>> ????????????? ??? 4.2.x. Now, how do I >>>>> ????????????? ??? >? ? ? ? ?>? ? ?take the reports? I version 3.5, >>>>> we had >>>>> ????????????? Jasper >>>>> ????????????? ??? reports module using >>>>> ????????????? ??? >? ? ? ? ?>? ? ?which we could take utilization >>>>> reports. >>>>> ????????????? Can we do >>>>> ????????????? ??? something similar >>>>> ????????????? ??? >? ? ? ? ?>? ? ?here? >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? ??? >? ? ? ? ?>? ? ?-- >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? ??? >? ? ? ? ?>? ? ?Thanks & Regards, >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? ??? >? ? ? ? ?>? ? ?Anantha Raghava >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? ??? >? ? ? ? ?>? ? ?Do not print this e-mail unless >>>>> ????????????? required. Save >>>>> ????????????? ??? Paper & trees. >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ??_______________________________________________ >>>>> ????????????? ??? >? ? ? ? ?>? ? ?Users mailing list >>>>> ????????????? ??? >? ? ? ? ?> Users at ovirt.org >>>>> ????????????? > >>>>> ????????????? ??? >>>>> ????????????? >> >>>>> ????????????? ??? >? ? ? ? ?>>>> ????????????? >>>> ????????????? > >>>>> ????????????? ??? >>>>> ????????????? >>> >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? http://lists.ovirt.org/mailman/listinfo/users >>>>> ????????????? >>>>> ????????????? ??? >>>> ????????????? > >>>>> ????????????? ??? > ?>>>> ????????????? >>>>> ????????????? ??? >>>> ????????????? >> >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? ?>>>> ????????????? >>>>> ????????????? ??? >>>> ????????????? > >>>>> ????????????? ??? > ?>>>> ????????????? >>>>> ????????????? >>>> ????????????? >>> >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? ??? >? ? ? ? ?> >>>>> _______________________________________________ >>>>> ????????????? ??? >? ? ? ? ?> Users mailing list >>>>> ????????????? ??? >? ? ? ? ?> Users at ovirt.org >>>>> ????????????? > >>>>> ????????????? ??? >>>>> ????????????? >> >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? http://lists.ovirt.org/mailman/listinfo/users >>>>> ????????????? >>>>> ????????????? ??? >>>> ????????????? > >>>>> ????????????? ??? > ?>>>> ????????????? >>>>> ????????????? ??? >>>> ????????????? >> >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? ??? > >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ? ? ?-- >>>>> ????????????? ??? >? ? ? ? ?*Peter Hudec* >>>>> ????????????? ??? >? ? ? ? ?Infra?trukt?rny architekt >>>>> ????????????? ??? > phudec at cnc.sk >>>>> ????????????? > >>>>> ????????????? >>>>> ????????????? ??? >> >>>>> ????????????? >>>>> ????????????? > >>>>> ????????????? ??? >?????? ?>>>> >>>>> ????????????? >>> >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ? ? ?*CNC,?a.s.* >>>>> ????????????? ??? >? ? ? ? ?Borsk? 6,?841 04 Bratislava >>>>> ????????????? ??? >? ? ? ? ?Recepcia:?+421 2? 35 000 100 >>>>> ????????????? ??? > >>>>> ????????????? ??? >? ? ? ? ?Mobil:+421?905 997 203 >>>>> ????????????? ??? >? ? ? ? ?*www.cnc.sk >>>>> ????????????? * >>>>> ????????????? ??? >>>>> >>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? ??? > >>>>> ????????????? ??? > >>>>> ??_______________________________________________ >>>>> ????????????? ??? >? ? ? ? ?Users mailing list >>>>> ????????????? ??? > Users at ovirt.org >>>>> ????????????? > >>>>> ????????????? >>>>> ????????????? ??? >> >>>>> ????????????? ??? > http://lists.ovirt.org/mailman/listinfo/users >>>>> ????????????? >>>>> ????????????? ??? >>>> ????????????? > >>>>> ????????????? ??? > ?>>>> ????????????? >>>>> ????????????? ??? >>>> ????????????? >> >>>>> ????????????? ??? > >>>>> ????????????? ??? > >>>>> ????????????? ??? > >>>>> >>>>> >>>>> ????????????? ??? -- >>>>> ????????????? ??? *Peter Hudec* >>>>> ????????????? ??? Infra?trukt?rny architekt >>>>> ????????????? ??? phudec at cnc.sk >>>>> ????????????? > >>>>> ????????????? >>>>> ????????????? ??? >> >>>>> >>>>> ????????????? ??? *CNC,?a.s.* >>>>> ????????????? ??? Borsk? 6,?841 04 Bratislava >>>>> ????????????? ??? Recepcia:?+421 2? 35 000 100 >>>>> >>>>> ????????????? ??? Mobil:+421?905 997 203 >>>>> ????????????? ??? *www.cnc.sk * >>>>> ????????????? >>>>> ????????????? ??? > >>>>> >>>>> >>>>> >>>>> >>>>> >> > -- *Peter Hudec* Infra?trukt?rny architekt phudec at cnc.sk *CNC,?a.s.* Borsk? 6,?841 04 Bratislava Recepcia:?+421 2? 35 000 100 Mobil:+421?905 997 203 *www.cnc.sk* From rmeggins at redhat.com Fri Apr 6 21:34:43 2018 From: rmeggins at redhat.com (Rich Megginson) Date: Fri, 6 Apr 2018 15:34:43 -0600 Subject: [ovirt-users] Engine reports In-Reply-To: <70243db2-b0e4-55f6-eef9-43a9f5f16c29@cnc.sk> References: <855bb1c1-33c7-d6ec-f513-5702bc2f736c@redhat.com> <4e975c4c-8492-c2c0-4649-75e1bf8a3163@redhat.com> <70243db2-b0e4-55f6-eef9-43a9f5f16c29@cnc.sk> Message-ID: <3be957c0-3667-cb3c-eb6a-d3e06600b597@redhat.com> On 04/06/2018 03:08 PM, Peter Hudec wrote: > Hi, > > https://tools.apps.hudecof.net/paste/view/1d493d52 > > The difference is > - I used latest ansible 2.5 from PIPY source, since the RPM package do > not fit requirements > - I used GIT repo for openshift-ansible. > > I could start it over with the RPM based openshift-ansible I recommend that you start over with the RPM based openshift-ansible, which is what the instructions say, which is what I have tested alternately - if you want to go the more experimental route, you could enable the epel-testing yum repo - ansible-2.5 is in epel-testing which I've been told by the openshift-ansible guys should work > > Peter > > On 06/04/2018 20:23, Rich Megginson wrote: >> I'm assuming you are running on a CentOS7 machine, recently updated to >> the latest base packages. Please confirm. >> >> Please provide the output of the following commands: >> >> sudo yum repolist >> >> sudo rpm -q ansible >> >> sudo yum repoquery -i ansible >> >> sudo rpm -q openshift-ansible >> >> sudo yum repoquery -i openshift-ansible >> >> sudo rpm -q origin >> >> sudo yum repoquery -i origin >> >> sudo cat >> /usr/share/ansible/openshift-ansible/roles/lib_utils/callback_plugins/aa_version_requirement.py >> >> >> sudo ls -alrtF /etc/origin/logging >> >> Please confirm that you followed the steps listed in the link below, >> including the use of the ansible inventory, vars.yaml.template, and repo >> files: >> https://github.com/richm/Main/blob/7e663351dc371b7895564072c7656ebfda45068d/README-install.md >> >> >> On 04/06/2018 03:19 AM, Peter Hudec wrote: >>> first issue is ansible version, could be solved by virtual env >>> >>> FATAL: Current Ansible version (2.4.2.0) is not supported. Supported >>> versions: 2.4.3.0 or newer >>> >>> yum install -y python-virtualenv >>> virtualenv ansible >>> . ./ansible/bin/activate >>> pip install -U pip setuptolls >>> pip install -U pip setuptools >>> pip install ansible >>> >>> >>> Second issue is a little bit strange for me >>> >>> 2018-04-06 10:00:30,264 p=68226 u=root |? Failure summary: >>> >>> >>> ?? 1. Hosts:??? localhost >>> ????? Play:???? OpenShift Aggregated Logging >>> ????? Task:???? pulling down signing items from host >>> ????? Message:? ESC[0;31mAll items completedESC[0m >>> >>> I have found in logs >>> >>> 2018-04-06 10:00:28,356 p=68226 u=root |? failed: [localhost] >>> (item=ca.crl.srl) => { >>> ???? "changed": false, >>> ???? "invocation": { >>> ???????? "module_args": { >>> ???????????? "src": "/etc/origin/logging/ca.crl.srl" >>> ???????? } >>> ???? }, >>> ???? "item": "ca.crl.srl", >>> ???? "msg": "file not found: /etc/origin/logging/ca.crl.srl" >>> >>> >>> Is this good or bad ? >>> >>> ????Peter >>> >>> On 05/04/2018 16:11, Rich Megginson wrote: >>>> Is it possible that you could start over from scratch, using the latest >>>> instructions/files at >>>> https://github.com/ViaQ/Main/pull/37/files? >>>> >>>> On 04/05/2018 07:19 AM, Peter Hudec wrote: >>>>> The version is from >>>>> >>>>> /usr/share/ansible/openshift-ansible/roles/openshift_facts/library/openshift_facts.py:get_openshift_version >>>>> >>>>> >>>>> >>>>> [PROD] root at dipostat01.cnc.sk: /usr/share/ansible/openshift-ansible # >>>>> /usr/bin/openshift version >>>>> openshift v3.10.0-alpha.0+f0186dd-401 >>>>> kubernetes v1.9.1+a0ce1bc657 >>>>> etcd 3.2.16 >>>>> >>>>> this binary is from the origin-3.7.2-1.el7.git.0.f0186dd.x86_64 package >>>>> >>>>> [PROD] root at dipostat01.cnc.sk: ~ # rpm -qf /usr/bin/openshift >>>>> origin-3.7.2-1.el7.git.0.f0186dd.x86_64 >>>>> >>>>> Hmm, why the version do not match ? >>>>> >>>>> ?????Peter >>>>> >>>>> On 04/04/2018 17:41, Shirly Radco wrote: >>>>>> Hi, >>>>>> >>>>>> >>>>>> I have a updated the installation instructions for installing >>>>>> OpenShift >>>>>> 3.9, based on Rich's work , for the oVirt use case. >>>>>> >>>>>> Please make sure where you get the 3.10 rpm and disable that repo. >>>>>> >>>>>> This is the PR that includes the metrics store installation of >>>>>> OpenShift 3.9 >>>>>> >>>>>> https://github.com/sradco/ovirt-site/blob/74f1e772c8ca75d4b9e57a3c02cce49c5030f7f7/source/develop/release-management/features/metrics/setting-up-viaq-logging.html.md >>>>>> >>>>>> >>>>>> >>>>>> It should be merged soon, but you can use it to install. >>>>>> >>>>>> >>>>>> Please make sure to add the?ansible-inventory-origin-39-aio file as >>>>>> described below. >>>>>> These are required parameters for the ansible playbook. >>>>>> >>>>>> >>>>>> Best regards, >>>>>> >>>>>> -- >>>>>> >>>>>> SHIRLY?RADCO >>>>>> >>>>>> BI SeNIOR SOFTWARE ENGINEER >>>>>> >>>>>> Red Hat?Israel >>>>>> >>>>>> >>>>>> TRIED. TESTED. TRUSTED. >>>>>> >>>>>> >>>>>> On Wed, Apr 4, 2018 at 5:41 PM, Rich Megginson >>>>> > wrote: >>>>>> >>>>>> ????? I'm sorry.? I misunderstood the request. >>>>>> >>>>>> ????? We are in the process of updating the instructions for >>>>>> installing >>>>>> ????? viaq logging based on upstream origin 3.9 - >>>>>> ????? https://github.com/ViaQ/Main/pull/37 >>>>>> ????? >>>>>> >>>>>> ????? In the meantime, you can follow along on that PR, and we will >>>>>> have >>>>>> ????? instructions very soon. >>>>>> >>>>>> >>>>>> ????? On 04/04/2018 08:26 AM, Rich Megginson wrote: >>>>>> >>>>>> ????????? On 04/04/2018 08:22 AM, Shirly Radco wrote: >>>>>> >>>>>> >>>>>> >>>>>> ????????????? -- >>>>>> >>>>>> ????????????? SHIRLY RADCO >>>>>> >>>>>> ????????????? BI SeNIOR SOFTWARE ENGINEER >>>>>> >>>>>> ????????????? Red Hat Israel >>>>>> >>>>>> ????????????? >>>>>> ????????????? TRIED. TESTED. TRUSTED. >>>>>> >>>>>> >>>>>> ????????????? On Wed, Apr 4, 2018 at 5:07 PM, Peter Hudec >>>>>> >>>>> ????????????? >>>>> ????????????? >> wrote: >>>>>> >>>>>> ????????????? ??? almost the same issue, the versio for openshoft >>>>>> release >>>>>> ????????????? changed to 3.9 >>>>>> >>>>>> ????????????? ??? Failure summary: >>>>>> >>>>>> >>>>>> ????????????? ??? ? 1. Hosts:? ? localhost >>>>>> ????????????? ??? ? ? ?Play:? ? ?Determine openshift_version to >>>>>> configure >>>>>> ????????????? on first >>>>>> ????????????? ??? master >>>>>> ????????????? ??? ? ? ?Task:? ? ?For an RPM install, abort when the >>>>>> release >>>>>> ????????????? ??? requested does >>>>>> ????????????? ??? not match the available version. >>>>>> ????????????? ??? ? ? ?Message:? You requested openshift_release 3.9, >>>>>> ????????????? which is not >>>>>> ????????????? ??? matched by >>>>>> ????????????? ??? ? ? ? ? ? ? ? ?the latest OpenShift RPM we >>>>>> detected as >>>>>> ????????????? origin-3.10.0 >>>>>> ????????????? ??? ? ? ? ? ? ? ? ?on host localhost. >>>>>> ????????????? ??? ? ? ? ? ? ? ? ?We will only install the latest >>>>>> RPMs, so >>>>>> ????????????? please ensure >>>>>> ????????????? ??? you are getting the release >>>>>> ????????????? ??? ? ? ? ? ? ? ? ?you expect. You may need to adjust >>>>>> your >>>>>> ????????????? Ansible >>>>>> ????????????? ??? inventory, modify the repositories >>>>>> ????????????? ??? ? ? ? ? ? ? ? ?available on the host, or run the >>>>>> ????????????? appropriate OpenShift >>>>>> ????????????? ??? upgrade playbook. >>>>>> >>>>>> >>>>>> ????????????? What is the rpm version installed of OpenShift?origin? >>>>>> ????????????? Do you perhaps have another repo that includes the >>>>>> OpenShift >>>>>> ????????????? origin-3.10.0? >>>>>> >>>>>> >>>>>> ????????? origin is the upstream version of OpenShift, which is >>>>>> unsupported. >>>>>> >>>>>> ????????? sudo repoquery -i origin >>>>>> >>>>>> ????????? This will tell you which repo it came from >>>>>> >>>>>> ????????? You will need to disable that repo and uninstall any >>>>>> packages >>>>>> ????????? which came from that repo >>>>>> >>>>>> ????????? Another mystery is why it is trying to install origin in the >>>>>> ????????? first place.? openshift-ansible with >>>>>> ????????? openshift_deployment_type=openshift-enterprise should not >>>>>> try to >>>>>> ????????? install origin, it should install packages with names like >>>>>> ????????? atomic-openshift-master, atomic-openshift-node, etc. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> ????????????? ??? On 04/04/2018 14:18, Shirly Radco wrote: >>>>>> ????????????? ??? > Adding Nicolas since he hit the same issue. >>>>>> ????????????? ??? > >>>>>> ????????????? ??? > -- >>>>>> ????????????? ??? > >>>>>> ????????????? ??? > SHIRLY?RADCO >>>>>> ????????????? ??? > >>>>>> ????????????? ??? > BI SeNIOR SOFTWARE ENGINEER >>>>>> ????????????? ??? > >>>>>> ????????????? ??? > Red Hat?Israel >>>>>> ????????????? ??? > >>>>>> ????????????? ??? > >>>>>> ????????????? ??? > TRIED. TESTED. TRUSTED. >>>>>> >>>>>> ????????????? ??? > >>>>>> ????????????? ??? > >>>>>> ????????????? ??? > On Wed, Apr 4, 2018 at 3:17 PM, Shirly Radco >>>>>> ????????????? >>>>>> ????????????? > >>>>>> ????????????? ??? > >>>>> >>>>>> ????????????? >>> >>>>>> wrote: >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?Hi Peter, >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?The installation instructions currently >>>>>> support >>>>>> ????????????? OpenShift 3.6. >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?I'm now working on updating them to support >>>>>> 3.9. >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?You currently have 3.10 installed. >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?Please install OpenShift 3.9 using this >>>>>> repository >>>>>> ????????????? ??? > >>>>>> >>>>>> https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>>> > >>>>>> ????????????? ??? > >>>>>> >>>>>> ??>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>>> >> >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?And add the following file to your vm >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?Run: >>>>>> ????????????? ??? >? ? ?vi /root/ansible-inventory-origin-39-aio >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?Add: >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?-------------- >>>>>> ????????????? ??? >? ? ?[OSEv3:children] >>>>>> ????????????? ??? >? ? ?nodes >>>>>> ????????????? ??? >? ? ?masters >>>>>> ????????????? ??? >? ? ?etcd >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?[OSEv3:vars] >>>>>> ????????????? ??? >? ? ?ansible_connection=local >>>>>> ????????????? ??? >? ? ?openshift_release=v3.9 >>>>>> ????????????? ??? >? ? ?openshift_logging_install_logging=true >>>>>> ????????????? ??? >? ? ?short_version=3.9 >>>>>> ????????????? ??? >? ? ?openshift_deployment_type=origin >>>>>> ????????????? ??? > >>>>>> ????????????? ?openshift_master_identity_providers=[{'mappingMethod': >>>>>> ????????????? 'lookup', >>>>>> ????????????? ??? >? ? ?'challenge': 'true', 'login': 'true', 'kind': >>>>>> ????????????? ??? >? ? ?'AllowAllPasswordIdentityProvider', 'name': >>>>>> ????????????? 'allow_all'}] >>>>>> ????????????? ??? >? ? ?# bug - doesn't use correct tag >>>>>> ????????????? ??? >? ? ?openshift_logging_image_version=v3.9 >>>>>> ????????????? ??? > >>>>>> >>>>>> ?openshift_logging_elasticsearch_proxy_image_version=v1.0.0 >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?openshift_logging_es_allow_external=True >>>>>> ????????????? ??? >? ? ?openshift_logging_use_mux=True >>>>>> ????????????? ??? >? ? ?openshift_logging_mux_allow_external=True >>>>>> ????????????? ??? > >>>>>> ??openshift_logging_mux_file_buffer_storage_type=hostmount >>>>>> ????????????? ??? > >>>>>> ??openshift_logging_elasticsearch_storage_type=hostmount >>>>>> ????????????? ??? > >>>>>> >>>>>> ??openshift_logging_elasticsearch_hostmount_path=/var/lib/elasticsearch >>>>>> >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?[nodes] >>>>>> ????????????? ??? >? ? ?localhost storage=True >>>>>> ????????????? openshift_node_labels="{'region': >>>>>> ????????????? ??? 'infra'}" >>>>>> ????????????? ??? >? ? ?openshift_schedulable=True >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?[masters] >>>>>> ????????????? ??? >? ? ?localhost storage=True >>>>>> ????????????? openshift_node_labels="{'region': >>>>>> ????????????? ??? 'infra'}" >>>>>> ????????????? ??? >? ? ?openshift_schedulable=True >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?[etcd] >>>>>> ????????????? ??? >? ? ?localhost storage=True >>>>>> ????????????? openshift_node_labels="{'region': >>>>>> ????????????? ??? 'infra'}" >>>>>> ????????????? ??? >? ? ?openshift_schedulable=True >>>>>> ????????????? ??? > >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?------------ >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?Save and exit. >>>>>> ????????????? ??? > >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?***Please make sure that you use /var as your >>>>>> ????????????? Elasticsearch >>>>>> ????????????? ??? >? ? ?persistent storage directory. >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?And when you run the OpenShift ansible >>>>>> ????????????? ??? > >>>>>> >>>>>> ??(https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>>> >>>>>> >>>>>> > >>>>>> >>>>>> >>>>>> ????????????? ??? > >>>>>> >>>>>> ??>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>>> >>>>>> >>>>>> >>) >>>>>> >>>>>> >>>>>> ????????????? ??? >? ? ?use the file you just created like this: >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?# cd /usr/share/ansible/openshift-ansible >>>>>> ????????????? ??? >? ? ?# (or wherever you cloned the git repo if >>>>>> using git) >>>>>> ????????????? ??? >? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log >>>>>> ansible-playbook >>>>>> ????????????? -vvv -e >>>>>> ????????????? ??? >? ? ?@/root/vars.yaml -i >>>>>> ????????????? /root/*ansible-inventory-origin-39-aio* >>>>>> ????????????? ??? >? ? ?playbooks/byo/config.yml >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?Best regards, >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?-- >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?SHIRLY?RADCO >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?BI SeNIOR SOFTWARE ENGINEER >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?Red Hat?Israel >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ? >>>>>> ????????????? ??? >? ? ?TRIED. TESTED. TRUSTED. >>>>>> >>>>>> ????????????? ??? > >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ?On Wed, Apr 4, 2018 at 12:17 PM, Peter Hudec >>>>>> ????????????? >>>>>> >>>>> ????????????? > >>>>>> ????????????? ??? >? ? ? >>>>>> ????????????? >>> wrote: >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ? ? ?Tried to install ovirt metrics, but got >>>>>> error >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log >>>>>> ????????????? ansible-playbook -vvv -e >>>>>> ????????????? ??? >? ? ? ? ?@/root/vars.yaml -i >>>>>> ????????????? /root/ansible-inventory-origin-37-aio >>>>>> ????????????? ??? >? ? ? ? ?playbooks/byo/config.yml >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ? ? ?? 1. Hosts:? ? localhost >>>>>> ????????????? ??? >? ? ? ? ?? ? ?Play:? ? ?Determine >>>>>> openshift_version to >>>>>> ????????????? configure >>>>>> ????????????? ??? on first >>>>>> ????????????? ??? >? ? ? ? ?master >>>>>> ????????????? ??? >? ? ? ? ?? ? ?Task:? ? ?For an RPM install, >>>>>> abort when >>>>>> ????????????? the release >>>>>> ????????????? ??? >? ? ? ? ?requested does >>>>>> ????????????? ??? >? ? ? ? ?not match the available version. >>>>>> ????????????? ??? >? ? ? ? ?? ? ?Message:? You requested >>>>>> openshift_release >>>>>> ????????????? 3.7, >>>>>> ????????????? ??? which is not >>>>>> ????????????? ??? >? ? ? ? ?matched by >>>>>> ????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?the latest OpenShift RPM we >>>>>> ????????????? detected as >>>>>> ????????????? ??? origin-3.10.0 >>>>>> ????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?on host localhost. >>>>>> ????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?We will only install the >>>>>> latest >>>>>> ????????????? RPMs, so >>>>>> ????????????? ??? please >>>>>> ????????????? ??? >? ? ? ? ?ensure >>>>>> ????????????? ??? >? ? ? ? ?you are getting the release >>>>>> ????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?you expect. You may need to >>>>>> ????????????? adjust your >>>>>> ????????????? ??? Ansible >>>>>> ????????????? ??? >? ? ? ? ?inventory, modify the repositories >>>>>> ????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?available on the host, >>>>>> or run >>>>>> ????????????? the appropriate >>>>>> ????????????? ??? >? ? ? ? ?OpenShift >>>>>> ????????????? ??? >? ? ? ? ?upgrade playbook. >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ? ? ?? ? ? ? regards >>>>>> ????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ? Peter >>>>>> ????????????? ??? > >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ? ? ?On 04/04/2018 09:13, Fred Rolland wrote: >>>>>> ????????????? ??? >? ? ? ? ?> Hi, >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? ??? >? ? ? ? ?> Check these links: >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> >>>>>> https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>>> > >>>>>> ????????????? ??? > >>>>>> >>>>>> ??>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>>> >> >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> >>>>>> https://ovirt.org/develop/release-management/features/metrics/metrics-store/ >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>>> >>>>>> >>>>>> > >>>>>> >>>>>> >>>>>> ????????????? ??? > >>>>>> >>>>>> ??>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>>> >>>>>> >>>>>> >> >>>>>> >>>>>> >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? ??? >? ? ? ? ?> Regards, >>>>>> ????????????? ??? >? ? ? ? ?> Fred >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? ??? >? ? ? ? ?> On Tue, Apr 3, 2018 at 9:38 AM, Anantha >>>>>> Raghava >>>>>> ????????????? ??? >? ? ? ? ?> >>>>> ????????????? >>>>>> ????????????? ??? >>>>> ????????????? > >>>>>> ????????????? ??? >? ? ? ? ?>>>>> ????????????? >>>>>> ????????????? ??? >>>>> ????????????? >> >>>>>> ????????????? ??? >? ? ? ? ?>>>>> ????????????? >>>>>> ????????????? ??? >>>>> ????????????? > >>>>>> ????????????? ??? >? ? ? ? ?>>>>> ????????????? >>>>>> ????????????? ??? >>>>> ????????????? >>>> >>>>>> ????????????? ??? >? ? ? ? ?> wrote: >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? ??? >? ? ? ? ?>? ? ?Hi, >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? ??? >? ? ? ? ?>? ? ?I see that oVirt DWH is installed >>>>>> with >>>>>> ????????????? Version >>>>>> ????????????? ??? 4.2.x. Now, how do I >>>>>> ????????????? ??? >? ? ? ? ?>? ? ?take the reports? I version 3.5, >>>>>> we had >>>>>> ????????????? Jasper >>>>>> ????????????? ??? reports module using >>>>>> ????????????? ??? >? ? ? ? ?>? ? ?which we could take utilization >>>>>> reports. >>>>>> ????????????? Can we do >>>>>> ????????????? ??? something similar >>>>>> ????????????? ??? >? ? ? ? ?>? ? ?here? >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? ??? >? ? ? ? ?>? ? ?-- >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? ??? >? ? ? ? ?>? ? ?Thanks & Regards, >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? ??? >? ? ? ? ?>? ? ?Anantha Raghava >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? ??? >? ? ? ? ?>? ? ?Do not print this e-mail unless >>>>>> ????????????? required. Save >>>>>> ????????????? ??? Paper & trees. >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ??_______________________________________________ >>>>>> ????????????? ??? >? ? ? ? ?>? ? ?Users mailing list >>>>>> ????????????? ??? >? ? ? ? ?> Users at ovirt.org >>>>>> ????????????? > >>>>>> ????????????? ??? >>>>>> ????????????? >> >>>>>> ????????????? ??? >? ? ? ? ?>>>>> ????????????? >>>>> ????????????? > >>>>>> ????????????? ??? >>>>>> ????????????? >>> >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? http://lists.ovirt.org/mailman/listinfo/users >>>>>> ????????????? >>>>>> ????????????? ??? >>>>> ????????????? > >>>>>> ????????????? ??? > ?>>>>> ????????????? >>>>>> ????????????? ??? >>>>> ????????????? >> >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? ?>>>>> ????????????? >>>>>> ????????????? ??? >>>>> ????????????? > >>>>>> ????????????? ??? > ?>>>>> ????????????? >>>>>> ????????????? >>>>> ????????????? >>> >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> _______________________________________________ >>>>>> ????????????? ??? >? ? ? ? ?> Users mailing list >>>>>> ????????????? ??? >? ? ? ? ?> Users at ovirt.org >>>>>> ????????????? > >>>>>> ????????????? ??? >>>>>> ????????????? >> >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? http://lists.ovirt.org/mailman/listinfo/users >>>>>> ????????????? >>>>>> ????????????? ??? >>>>> ????????????? > >>>>>> ????????????? ??? > ?>>>>> ????????????? >>>>>> ????????????? ??? >>>>> ????????????? >> >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? ??? > >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ? ? ?-- >>>>>> ????????????? ??? >? ? ? ? ?*Peter Hudec* >>>>>> ????????????? ??? >? ? ? ? ?Infra?trukt?rny architekt >>>>>> ????????????? ??? > phudec at cnc.sk >>>>>> ????????????? > >>>>>> ????????????? >>>>>> ????????????? ??? >> >>>>>> ????????????? >>>>>> ????????????? > >>>>>> ????????????? ??? >?????? ?>>>>> >>>>>> ????????????? >>> >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ? ? ?*CNC,?a.s.* >>>>>> ????????????? ??? >? ? ? ? ?Borsk? 6,?841 04 Bratislava >>>>>> ????????????? ??? >? ? ? ? ?Recepcia:?+421 2? 35 000 100 >>>>>> ????????????? ??? > >>>>>> ????????????? ??? >? ? ? ? ?Mobil:+421?905 997 203 >>>>>> ????????????? ??? >? ? ? ? ?*www.cnc.sk >>>>>> ????????????? * >>>>>> ????????????? ??? >>>>>> >>>>>> ????????????? ??? >? ? ? ? ?> >>>>>> ????????????? ??? > >>>>>> ????????????? ??? > >>>>>> ??_______________________________________________ >>>>>> ????????????? ??? >? ? ? ? ?Users mailing list >>>>>> ????????????? ??? > Users at ovirt.org >>>>>> ????????????? > >>>>>> ????????????? >>>>>> ????????????? ??? >> >>>>>> ????????????? ??? > http://lists.ovirt.org/mailman/listinfo/users >>>>>> ????????????? >>>>>> ????????????? ??? >>>>> ????????????? > >>>>>> ????????????? ??? > ?>>>>> ????????????? >>>>>> ????????????? ??? >>>>> ????????????? >> >>>>>> ????????????? ??? > >>>>>> ????????????? ??? > >>>>>> ????????????? ??? > >>>>>> >>>>>> >>>>>> ????????????? ??? -- >>>>>> ????????????? ??? *Peter Hudec* >>>>>> ????????????? ??? Infra?trukt?rny architekt >>>>>> ????????????? ??? phudec at cnc.sk >>>>>> ????????????? > >>>>>> ????????????? >>>>>> ????????????? ??? >> >>>>>> >>>>>> ????????????? ??? *CNC,?a.s.* >>>>>> ????????????? ??? Borsk? 6,?841 04 Bratislava >>>>>> ????????????? ??? Recepcia:?+421 2? 35 000 100 >>>>>> >>>>>> ????????????? ??? Mobil:+421?905 997 203 >>>>>> ????????????? ??? *www.cnc.sk * >>>>>> ????????????? >>>>>> ????????????? ??? > >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> > From phudec at cnc.sk Fri Apr 6 22:43:18 2018 From: phudec at cnc.sk (Peter Hudec) Date: Sat, 7 Apr 2018 00:43:18 +0200 Subject: [ovirt-users] Engine reports In-Reply-To: <3be957c0-3667-cb3c-eb6a-d3e06600b597@redhat.com> References: <855bb1c1-33c7-d6ec-f513-5702bc2f736c@redhat.com> <4e975c4c-8492-c2c0-4649-75e1bf8a3163@redhat.com> <70243db2-b0e4-55f6-eef9-43a9f5f16c29@cnc.sk> <3be957c0-3667-cb3c-eb6a-d3e06600b597@redhat.com> Message-ID: Ansible playbook finished OK. The next step after weekend. thanks Peter On 06/04/2018 23:34, Rich Megginson wrote: > On 04/06/2018 03:08 PM, Peter Hudec wrote: >> Hi, >> >> https://tools.apps.hudecof.net/paste/view/1d493d52 >> >> The difference is >> - I used latest ansible 2.5 from PIPY source, since the RPM package do >> not fit requirements >> - I used GIT repo for openshift-ansible. >> >> I could start it over with the RPM based openshift-ansible > > I recommend that you start over with the RPM based openshift-ansible, > which is what the instructions say, which is what I have tested > > alternately - if you want to go the more experimental route, you could > enable the epel-testing yum repo - ansible-2.5 is in epel-testing which > I've been told by the openshift-ansible guys should work > >> >> ????Peter >> >> On 06/04/2018 20:23, Rich Megginson wrote: >>> I'm assuming you are running on a CentOS7 machine, recently updated to >>> the latest base packages. Please confirm. >>> >>> Please provide the output of the following commands: >>> >>> sudo yum repolist >>> >>> sudo rpm -q ansible >>> >>> sudo yum repoquery -i ansible >>> >>> sudo rpm -q openshift-ansible >>> >>> sudo yum repoquery -i openshift-ansible >>> >>> sudo rpm -q origin >>> >>> sudo yum repoquery -i origin >>> >>> sudo cat >>> /usr/share/ansible/openshift-ansible/roles/lib_utils/callback_plugins/aa_version_requirement.py >>> >>> >>> >>> sudo ls -alrtF /etc/origin/logging >>> >>> Please confirm that you followed the steps listed in the link below, >>> including the use of the ansible inventory, vars.yaml.template, and repo >>> files: >>> https://github.com/richm/Main/blob/7e663351dc371b7895564072c7656ebfda45068d/README-install.md >>> >>> >>> >>> On 04/06/2018 03:19 AM, Peter Hudec wrote: >>>> first issue is ansible version, could be solved by virtual env >>>> >>>> FATAL: Current Ansible version (2.4.2.0) is not supported. Supported >>>> versions: 2.4.3.0 or newer >>>> >>>> yum install -y python-virtualenv >>>> virtualenv ansible >>>> . ./ansible/bin/activate >>>> pip install -U pip setuptolls >>>> pip install -U pip setuptools >>>> pip install ansible >>>> >>>> >>>> Second issue is a little bit strange for me >>>> >>>> 2018-04-06 10:00:30,264 p=68226 u=root |? Failure summary: >>>> >>>> >>>> ??? 1. Hosts:??? localhost >>>> ?????? Play:???? OpenShift Aggregated Logging >>>> ?????? Task:???? pulling down signing items from host >>>> ?????? Message:? ESC[0;31mAll items completedESC[0m >>>> >>>> I have found in logs >>>> >>>> 2018-04-06 10:00:28,356 p=68226 u=root |? failed: [localhost] >>>> (item=ca.crl.srl) => { >>>> ????? "changed": false, >>>> ????? "invocation": { >>>> ????????? "module_args": { >>>> ????????????? "src": "/etc/origin/logging/ca.crl.srl" >>>> ????????? } >>>> ????? }, >>>> ????? "item": "ca.crl.srl", >>>> ????? "msg": "file not found: /etc/origin/logging/ca.crl.srl" >>>> >>>> >>>> Is this good or bad ? >>>> >>>> ?????Peter >>>> >>>> On 05/04/2018 16:11, Rich Megginson wrote: >>>>> Is it possible that you could start over from scratch, using the >>>>> latest >>>>> instructions/files at >>>>> https://github.com/ViaQ/Main/pull/37/files? >>>>> >>>>> On 04/05/2018 07:19 AM, Peter Hudec wrote: >>>>>> The version is from >>>>>> >>>>>> /usr/share/ansible/openshift-ansible/roles/openshift_facts/library/openshift_facts.py:get_openshift_version >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> [PROD] root at dipostat01.cnc.sk: /usr/share/ansible/openshift-ansible # >>>>>> /usr/bin/openshift version >>>>>> openshift v3.10.0-alpha.0+f0186dd-401 >>>>>> kubernetes v1.9.1+a0ce1bc657 >>>>>> etcd 3.2.16 >>>>>> >>>>>> this binary is from the origin-3.7.2-1.el7.git.0.f0186dd.x86_64 >>>>>> package >>>>>> >>>>>> [PROD] root at dipostat01.cnc.sk: ~ # rpm -qf /usr/bin/openshift >>>>>> origin-3.7.2-1.el7.git.0.f0186dd.x86_64 >>>>>> >>>>>> Hmm, why the version do not match ? >>>>>> >>>>>> ??????Peter >>>>>> >>>>>> On 04/04/2018 17:41, Shirly Radco wrote: >>>>>>> Hi, >>>>>>> >>>>>>> >>>>>>> I have a updated the installation instructions for installing >>>>>>> OpenShift >>>>>>> 3.9, based on Rich's work , for the oVirt use case. >>>>>>> >>>>>>> Please make sure where you get the 3.10 rpm and disable that repo. >>>>>>> >>>>>>> This is the PR that includes the metrics store installation of >>>>>>> OpenShift 3.9 >>>>>>> >>>>>>> https://github.com/sradco/ovirt-site/blob/74f1e772c8ca75d4b9e57a3c02cce49c5030f7f7/source/develop/release-management/features/metrics/setting-up-viaq-logging.html.md >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> It should be merged soon, but you can use it to install. >>>>>>> >>>>>>> >>>>>>> Please make sure to add the?ansible-inventory-origin-39-aio file as >>>>>>> described below. >>>>>>> These are required parameters for the ansible playbook. >>>>>>> >>>>>>> >>>>>>> Best regards, >>>>>>> >>>>>>> --? >>>>>>> >>>>>>> SHIRLY?RADCO >>>>>>> >>>>>>> BI SeNIOR SOFTWARE ENGINEER >>>>>>> >>>>>>> Red Hat?Israel >>>>>>> >>>>>>> >>>>>>> TRIED. TESTED. TRUSTED. >>>>>>> >>>>>>> >>>>>>> On Wed, Apr 4, 2018 at 5:41 PM, Rich Megginson >>>>>> > wrote: >>>>>>> >>>>>>> ?????? I'm sorry.? I misunderstood the request. >>>>>>> >>>>>>> ?????? We are in the process of updating the instructions for >>>>>>> installing >>>>>>> ?????? viaq logging based on upstream origin 3.9 - >>>>>>> ?????? https://github.com/ViaQ/Main/pull/37 >>>>>>> ?????? >>>>>>> >>>>>>> ?????? In the meantime, you can follow along on that PR, and we will >>>>>>> have >>>>>>> ?????? instructions very soon. >>>>>>> >>>>>>> >>>>>>> ?????? On 04/04/2018 08:26 AM, Rich Megginson wrote: >>>>>>> >>>>>>> ?????????? On 04/04/2018 08:22 AM, Shirly Radco wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>> ?????????????? -- >>>>>>> >>>>>>> ?????????????? SHIRLY RADCO >>>>>>> >>>>>>> ?????????????? BI SeNIOR SOFTWARE ENGINEER >>>>>>> >>>>>>> ?????????????? Red Hat Israel >>>>>>> >>>>>>> ?????????????? >>>>>>> ?????????????? TRIED. TESTED. TRUSTED. >>>>>>> >>>>>>> >>>>>>> ?????????????? On Wed, Apr 4, 2018 at 5:07 PM, Peter Hudec >>>>>>> >>>>>> ?????????????? >>>>>> ?????????????? >> wrote: >>>>>>> >>>>>>> ?????????????? ??? almost the same issue, the versio for openshoft >>>>>>> release >>>>>>> ?????????????? changed to 3.9 >>>>>>> >>>>>>> ?????????????? ??? Failure summary: >>>>>>> >>>>>>> >>>>>>> ?????????????? ??? ? 1. Hosts:? ? localhost >>>>>>> ?????????????? ??? ? ? ?Play:? ? ?Determine openshift_version to >>>>>>> configure >>>>>>> ?????????????? on first >>>>>>> ?????????????? ??? master >>>>>>> ?????????????? ??? ? ? ?Task:? ? ?For an RPM install, abort when the >>>>>>> release >>>>>>> ?????????????? ??? requested does >>>>>>> ?????????????? ??? not match the available version. >>>>>>> ?????????????? ??? ? ? ?Message:? You requested openshift_release >>>>>>> 3.9, >>>>>>> ?????????????? which is not >>>>>>> ?????????????? ??? matched by >>>>>>> ?????????????? ??? ? ? ? ? ? ? ? ?the latest OpenShift RPM we >>>>>>> detected as >>>>>>> ?????????????? origin-3.10.0 >>>>>>> ?????????????? ??? ? ? ? ? ? ? ? ?on host localhost. >>>>>>> ?????????????? ??? ? ? ? ? ? ? ? ?We will only install the latest >>>>>>> RPMs, so >>>>>>> ?????????????? please ensure >>>>>>> ?????????????? ??? you are getting the release >>>>>>> ?????????????? ??? ? ? ? ? ? ? ? ?you expect. You may need to adjust >>>>>>> your >>>>>>> ?????????????? Ansible >>>>>>> ?????????????? ??? inventory, modify the repositories >>>>>>> ?????????????? ??? ? ? ? ? ? ? ? ?available on the host, or run the >>>>>>> ?????????????? appropriate OpenShift >>>>>>> ?????????????? ??? upgrade playbook. >>>>>>> >>>>>>> >>>>>>> ?????????????? What is the rpm version installed of >>>>>>> OpenShift?origin? >>>>>>> ?????????????? Do you perhaps have another repo that includes the >>>>>>> OpenShift >>>>>>> ?????????????? origin-3.10.0? >>>>>>> >>>>>>> >>>>>>> ?????????? origin is the upstream version of OpenShift, which is >>>>>>> unsupported. >>>>>>> >>>>>>> ?????????? sudo repoquery -i origin >>>>>>> >>>>>>> ?????????? This will tell you which repo it came from >>>>>>> >>>>>>> ?????????? You will need to disable that repo and uninstall any >>>>>>> packages >>>>>>> ?????????? which came from that repo >>>>>>> >>>>>>> ?????????? Another mystery is why it is trying to install origin >>>>>>> in the >>>>>>> ?????????? first place.? openshift-ansible with >>>>>>> ?????????? openshift_deployment_type=openshift-enterprise should not >>>>>>> try to >>>>>>> ?????????? install origin, it should install packages with names >>>>>>> like >>>>>>> ?????????? atomic-openshift-master, atomic-openshift-node, etc. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> ?????????????? ??? On 04/04/2018 14:18, Shirly Radco wrote: >>>>>>> ?????????????? ??? > Adding Nicolas since he hit the same issue. >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? > -- >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? > SHIRLY?RADCO >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? > BI SeNIOR SOFTWARE ENGINEER >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? > Red Hat?Israel >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? > TRIED. TESTED. TRUSTED. >>>>>>> >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? > On Wed, Apr 4, 2018 at 3:17 PM, Shirly Radco >>>>>>> ?????????????? >>>>>>> ?????????????? > >>>>>>> ?????????????? ??? > >>>>>> >>>>>>> ?????????????? >>>>>> >>> >>>>>>> wrote: >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?Hi Peter, >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?The installation instructions currently >>>>>>> support >>>>>>> ?????????????? OpenShift 3.6. >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?I'm now working on updating them to support >>>>>>> 3.9. >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?You currently have 3.10 installed. >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?Please install OpenShift 3.9 using this >>>>>>> repository >>>>>>> ?????????????? ??? > >>>>>>> ????????????? >>>>>>> https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo >>>>>>> ???????????? >>>>>>> >>>>>>> ????????????? >>>>>>> >>>>>> ???????????? >>>>>>> > >>>>>>> ?????????????? ??? > >>>>>>> ???????????? >>>>>>> ???>>>>>> ???????????? >>>>>>> >>>>>>> ????????????? >>>>>>> >>>>>> ???????????? >>>>>>> >> >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?And add the following file to your vm >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?Run: >>>>>>> ?????????????? ??? >? ? ?vi /root/ansible-inventory-origin-39-aio >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?Add: >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?-------------- >>>>>>> ?????????????? ??? >? ? ?[OSEv3:children] >>>>>>> ?????????????? ??? >? ? ?nodes >>>>>>> ?????????????? ??? >? ? ?masters >>>>>>> ?????????????? ??? >? ? ?etcd >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?[OSEv3:vars] >>>>>>> ?????????????? ??? >? ? ?ansible_connection=local >>>>>>> ?????????????? ??? >? ? ?openshift_release=v3.9 >>>>>>> ?????????????? ??? >? ? ?openshift_logging_install_logging=true >>>>>>> ?????????????? ??? >? ? ?short_version=3.9 >>>>>>> ?????????????? ??? >? ? ?openshift_deployment_type=origin >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? >>>>>>> ?openshift_master_identity_providers=[{'mappingMethod': >>>>>>> ?????????????? 'lookup', >>>>>>> ?????????????? ??? >? ? ?'challenge': 'true', 'login': 'true', >>>>>>> 'kind': >>>>>>> ?????????????? ??? >? ? ?'AllowAllPasswordIdentityProvider', 'name': >>>>>>> ?????????????? 'allow_all'}] >>>>>>> ?????????????? ??? >? ? ?# bug - doesn't use correct tag >>>>>>> ?????????????? ??? >? ? ?openshift_logging_image_version=v3.9 >>>>>>> ?????????????? ??? > >>>>>>> ????????????? >>>>>>> ??openshift_logging_elasticsearch_proxy_image_version=v1.0.0 >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?openshift_logging_es_allow_external=True >>>>>>> ?????????????? ??? >? ? ?openshift_logging_use_mux=True >>>>>>> ?????????????? ??? >? ? ?openshift_logging_mux_allow_external=True >>>>>>> ?????????????? ??? > >>>>>>> ???openshift_logging_mux_file_buffer_storage_type=hostmount >>>>>>> ?????????????? ??? > >>>>>>> ???openshift_logging_elasticsearch_storage_type=hostmount >>>>>>> ?????????????? ??? > >>>>>>> ???????????? >>>>>>> ???openshift_logging_elasticsearch_hostmount_path=/var/lib/elasticsearch >>>>>>> >>>>>>> >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?[nodes] >>>>>>> ?????????????? ??? >? ? ?localhost storage=True >>>>>>> ?????????????? openshift_node_labels="{'region': >>>>>>> ?????????????? ??? 'infra'}" >>>>>>> ?????????????? ??? >? ? ?openshift_schedulable=True >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?[masters] >>>>>>> ?????????????? ??? >? ? ?localhost storage=True >>>>>>> ?????????????? openshift_node_labels="{'region': >>>>>>> ?????????????? ??? 'infra'}" >>>>>>> ?????????????? ??? >? ? ?openshift_schedulable=True >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?[etcd] >>>>>>> ?????????????? ??? >? ? ?localhost storage=True >>>>>>> ?????????????? openshift_node_labels="{'region': >>>>>>> ?????????????? ??? 'infra'}" >>>>>>> ?????????????? ??? >? ? ?openshift_schedulable=True >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?------------ >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?Save and exit. >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?***Please make sure that you use /var as >>>>>>> your >>>>>>> ?????????????? Elasticsearch >>>>>>> ?????????????? ??? >? ? ?persistent storage directory. >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?And when you run the OpenShift ansible >>>>>>> ?????????????? ??? > >>>>>>> ???????????? >>>>>>> ???(https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible >>>>>>> >>>>>>> >>>>>>> >>>>>>> ???????????? >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> ???????????? >>>>>>> >>>>>> >>>>>>> >>>>>>> >>>>>>> ???????????? >>>>>>> > >>>>>>> >>>>>>> >>>>>>> >>>>>>> ?????????????? ??? > >>>>>>> ???????????? >>>>>>> ???>>>>>> >>>>>>> >>>>>>> >>>>>>> ???????????? >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> ???????????? >>>>>>> >>>>>> >>>>>>> >>>>>>> >>>>>>> ???????????? >>>>>>> >>) >>>>>>> >>>>>>> >>>>>>> >>>>>>> ?????????????? ??? >? ? ?use the file you just created like this: >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?# cd /usr/share/ansible/openshift-ansible >>>>>>> ?????????????? ??? >? ? ?# (or wherever you cloned the git repo if >>>>>>> using git) >>>>>>> ?????????????? ??? >? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log >>>>>>> ansible-playbook >>>>>>> ?????????????? -vvv -e >>>>>>> ?????????????? ??? >? ? ?@/root/vars.yaml -i >>>>>>> ?????????????? /root/*ansible-inventory-origin-39-aio* >>>>>>> ?????????????? ??? >? ? ?playbooks/byo/config.yml >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?Best regards, >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?-- >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?SHIRLY?RADCO >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?BI SeNIOR SOFTWARE ENGINEER >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?Red Hat?Israel >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ? >>>>>>> ?????????????? ??? >? ? ?TRIED. TESTED. TRUSTED. >>>>>>> >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ?On Wed, Apr 4, 2018 at 12:17 PM, Peter >>>>>>> Hudec >>>>>>> ?????????????? >>>>>>> >>>>>> ?????????????? > >>>>>>> ?????????????? ??? >? ? ?>>>>>> >>>>>>> ?????????????? >>> >>>>>>> wrote: >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ? ? ?Tried to install ovirt metrics, but got >>>>>>> error >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log >>>>>>> ?????????????? ansible-playbook -vvv -e >>>>>>> ?????????????? ??? >? ? ? ? ?@/root/vars.yaml -i >>>>>>> ?????????????? /root/ansible-inventory-origin-37-aio >>>>>>> ?????????????? ??? >? ? ? ? ?playbooks/byo/config.yml >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ? ? ?? 1. Hosts:? ? localhost >>>>>>> ?????????????? ??? >? ? ? ? ?? ? ?Play:? ? ?Determine >>>>>>> openshift_version to >>>>>>> ?????????????? configure >>>>>>> ?????????????? ??? on first >>>>>>> ?????????????? ??? >? ? ? ? ?master >>>>>>> ?????????????? ??? >? ? ? ? ?? ? ?Task:? ? ?For an RPM install, >>>>>>> abort when >>>>>>> ?????????????? the release >>>>>>> ?????????????? ??? >? ? ? ? ?requested does >>>>>>> ?????????????? ??? >? ? ? ? ?not match the available version. >>>>>>> ?????????????? ??? >? ? ? ? ?? ? ?Message:? You requested >>>>>>> openshift_release >>>>>>> ?????????????? 3.7, >>>>>>> ?????????????? ??? which is not >>>>>>> ?????????????? ??? >? ? ? ? ?matched by >>>>>>> ?????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?the latest OpenShift >>>>>>> RPM we >>>>>>> ?????????????? detected as >>>>>>> ?????????????? ??? origin-3.10.0 >>>>>>> ?????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?on host localhost. >>>>>>> ?????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?We will only install the >>>>>>> latest >>>>>>> ?????????????? RPMs, so >>>>>>> ?????????????? ??? please >>>>>>> ?????????????? ??? >? ? ? ? ?ensure >>>>>>> ?????????????? ??? >? ? ? ? ?you are getting the release >>>>>>> ?????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?you expect. You may >>>>>>> need to >>>>>>> ?????????????? adjust your >>>>>>> ?????????????? ??? Ansible >>>>>>> ?????????????? ??? >? ? ? ? ?inventory, modify the repositories >>>>>>> ?????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?available on the host, >>>>>>> or run >>>>>>> ?????????????? the appropriate >>>>>>> ?????????????? ??? >? ? ? ? ?OpenShift >>>>>>> ?????????????? ??? >? ? ? ? ?upgrade playbook. >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ? ? ?? ? ? ? regards >>>>>>> ?????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ? Peter >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ? ? ?On 04/04/2018 09:13, Fred Rolland >>>>>>> wrote: >>>>>>> ?????????????? ??? >? ? ? ? ?> Hi, >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? ??? >? ? ? ? ?> Check these links: >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ???????????????????????????? >>>>>>> https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ >>>>>>> ???????????? >>>>>>> >>>>>>> ????????????? >>>>>>> >>>>>> ???????????? >>>>>>> > >>>>>>> ?????????????? ??? > >>>>>>> ???????????? >>>>>>> ???>>>>>> ???????????? >>>>>>> >>>>>>> ????????????? >>>>>>> >>>>>> ???????????? >>>>>>> >> >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ???????????? >>>>>>> https://ovirt.org/develop/release-management/features/metrics/metrics-store/ >>>>>>> >>>>>>> >>>>>>> >>>>>>> ???????????? >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> ???????????? >>>>>>> >>>>>> >>>>>>> >>>>>>> >>>>>>> ???????????? >>>>>>> > >>>>>>> >>>>>>> >>>>>>> >>>>>>> ?????????????? ??? > >>>>>>> ???????????? >>>>>>> ???>>>>>> >>>>>>> >>>>>>> >>>>>>> ???????????? >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> ???????????? >>>>>>> >>>>>> >>>>>>> >>>>>>> >>>>>>> ???????????? >>>>>>> >> >>>>>>> >>>>>>> >>>>>>> >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? ??? >? ? ? ? ?> Regards, >>>>>>> ?????????????? ??? >? ? ? ? ?> Fred >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? ??? >? ? ? ? ?> On Tue, Apr 3, 2018 at 9:38 AM, >>>>>>> Anantha >>>>>>> Raghava >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>> ?????????????? >>>>>>> ?????????????? ??? >>>>>> ?????????????? > >>>>>>> ?????????????? ??? >? ? ? ? ?>>>>>> ?????????????? >>>>>>> ?????????????? ??? >>>>>> ?????????????? >> >>>>>>> ?????????????? ??? >? ? ? ? ?>>>>>> ?????????????? >>>>>>> ?????????????? ??? >>>>>> ?????????????? > >>>>>>> ?????????????? ??? >? ? ? ? ?>>>>>> ?????????????? >>>>>>> ?????????????? ??? >>>>>> ?????????????? >>>> >>>>>>> ?????????????? ??? >? ? ? ? ?> wrote: >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? ??? >? ? ? ? ?>? ? ?Hi, >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? ??? >? ? ? ? ?>? ? ?I see that oVirt DWH is installed >>>>>>> with >>>>>>> ?????????????? Version >>>>>>> ?????????????? ??? 4.2.x. Now, how do I >>>>>>> ?????????????? ??? >? ? ? ? ?>? ? ?take the reports? I version 3.5, >>>>>>> we had >>>>>>> ?????????????? Jasper >>>>>>> ?????????????? ??? reports module using >>>>>>> ?????????????? ??? >? ? ? ? ?>? ? ?which we could take utilization >>>>>>> reports. >>>>>>> ?????????????? Can we do >>>>>>> ?????????????? ??? something similar >>>>>>> ?????????????? ??? >? ? ? ? ?>? ? ?here? >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? ??? >? ? ? ? ?>? ? ?-- >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? ??? >? ? ? ? ?>? ? ?Thanks & Regards, >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? ??? >? ? ? ? ?>? ? ?Anantha Raghava >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? ??? >? ? ? ? ?>? ? ?Do not print this e-mail unless >>>>>>> ?????????????? required. Save >>>>>>> ?????????????? ??? Paper & trees. >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ???_______________________________________________ >>>>>>> ?????????????? ??? >? ? ? ? ?>? ? ?Users mailing list >>>>>>> ?????????????? ??? >? ? ? ? ?> Users at ovirt.org >>>>>>> >>>>>>> ?????????????? > >>>>>>> ?????????????? ??? >>>>>>> ?????????????? >> >>>>>>> ?????????????? ??? >? ? ? ? ?>>>>>> ?????????????? >>>>>> ?????????????? > >>>>>>> ?????????????? ??? >>>>>>> ?????????????? >>> >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? http://lists.ovirt.org/mailman/listinfo/users >>>>>>> ?????????????? >>>>>>> ?????????????? ??? >>>>>> ?????????????? > >>>>>>> ?????????????? ??? > ?>>>>>> ?????????????? >>>>>>> ?????????????? ??? >>>>>> ?????????????? >> >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? ?>>>>>> ?????????????? >>>>>>> ?????????????? ??? >>>>>> ?????????????? > >>>>>>> ?????????????? ??? > ?>>>>>> ?????????????? >>>>>>> ?????????????? >>>>>> ?????????????? >>> >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> _______________________________________________ >>>>>>> ?????????????? ??? >? ? ? ? ?> Users mailing list >>>>>>> ?????????????? ??? >? ? ? ? ?> Users at ovirt.org >>>>>>> >>>>>>> ?????????????? > >>>>>>> ?????????????? ??? >>>>>>> ?????????????? >> >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? http://lists.ovirt.org/mailman/listinfo/users >>>>>>> ?????????????? >>>>>>> ?????????????? ??? >>>>>> ?????????????? > >>>>>>> ?????????????? ??? > ?>>>>>> ?????????????? >>>>>>> ?????????????? ??? >>>>>> ?????????????? >> >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ? ? ?-- >>>>>>> ?????????????? ??? >? ? ? ? ?*Peter Hudec* >>>>>>> ?????????????? ??? >? ? ? ? ?Infra?trukt?rny architekt >>>>>>> ?????????????? ??? > phudec at cnc.sk >>>>>>> ?????????????? > >>>>>>> ?????????????? >>>>>>> ?????????????? ??? >> >>>>>>> ?????????????? >>>>>>> ?????????????? > >>>>>>> ?????????????? ??? >?????? ?>>>>>> >>>>>>> ?????????????? >>> >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ? ? ?*CNC,?a.s.* >>>>>>> ?????????????? ??? >? ? ? ? ?Borsk? 6,?841 04 Bratislava >>>>>>> ?????????????? ??? >? ? ? ? ?Recepcia:?+421 2? 35 000 100 >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? >? ? ? ? ?Mobil:+421?905 997 203 >>>>>>> ?????????????? ??? >? ? ? ? ?*www.cnc.sk >>>>>>> ?????????????? * >>>>>>> ?????????????? ??? >>>>>>> >>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? > >>>>>>> ???_______________________________________________ >>>>>>> ?????????????? ??? >? ? ? ? ?Users mailing list >>>>>>> ?????????????? ??? > Users at ovirt.org >>>>>>> ?????????????? > >>>>>>> ?????????????? >>>>>>> ?????????????? ??? >>>>>> >> >>>>>>> ?????????????? ??? > http://lists.ovirt.org/mailman/listinfo/users >>>>>>> ?????????????? >>>>>>> ?????????????? ??? >>>>>> ?????????????? > >>>>>>> ?????????????? ??? > ?>>>>>> ?????????????? >>>>>>> ?????????????? ??? >>>>>> ?????????????? >> >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? > >>>>>>> ?????????????? ??? > >>>>>>> >>>>>>> >>>>>>> ?????????????? ??? -- >>>>>>> ?????????????? ??? *Peter Hudec* >>>>>>> ?????????????? ??? Infra?trukt?rny architekt >>>>>>> ?????????????? ??? phudec at cnc.sk >>>>>>> ?????????????? > >>>>>>> ?????????????? >>>>>>> ?????????????? ??? >> >>>>>>> >>>>>>> ?????????????? ??? *CNC,?a.s.* >>>>>>> ?????????????? ??? Borsk? 6,?841 04 Bratislava >>>>>>> ?????????????? ??? Recepcia:?+421 2? 35 000 100 >>>>>>> >>>>>>> ?????????????? ??? Mobil:+421?905 997 203 >>>>>>> ?????????????? ??? *www.cnc.sk >>>>>>> * >>>>>>> ?????????????? >>>>>>> ?????????????? ??? > >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >> > -- *Peter Hudec* Infra?trukt?rny architekt phudec at cnc.sk *CNC,?a.s.* Borsk? 6,?841 04 Bratislava Recepcia:?+421 2? 35 000 100 Mobil:+421?905 997 203 *www.cnc.sk* From rmeggins at redhat.com Fri Apr 6 23:09:48 2018 From: rmeggins at redhat.com (Rich Megginson) Date: Fri, 6 Apr 2018 17:09:48 -0600 Subject: [ovirt-users] Engine reports In-Reply-To: References: <855bb1c1-33c7-d6ec-f513-5702bc2f736c@redhat.com> <4e975c4c-8492-c2c0-4649-75e1bf8a3163@redhat.com> <70243db2-b0e4-55f6-eef9-43a9f5f16c29@cnc.sk> <3be957c0-3667-cb3c-eb6a-d3e06600b597@redhat.com> Message-ID: <31bf3237-ab58-dcf3-8ce8-38dc9348dcc5@redhat.com> Great! On 04/06/2018 04:43 PM, Peter Hudec wrote: > Ansible playbook finished OK. The next step after weekend. > > thanks > Peter > > On 06/04/2018 23:34, Rich Megginson wrote: >> On 04/06/2018 03:08 PM, Peter Hudec wrote: >>> Hi, >>> >>> https://tools.apps.hudecof.net/paste/view/1d493d52 >>> >>> The difference is >>> - I used latest ansible 2.5 from PIPY source, since the RPM package do >>> not fit requirements >>> - I used GIT repo for openshift-ansible. >>> >>> I could start it over with the RPM based openshift-ansible >> I recommend that you start over with the RPM based openshift-ansible, >> which is what the instructions say, which is what I have tested >> >> alternately - if you want to go the more experimental route, you could >> enable the epel-testing yum repo - ansible-2.5 is in epel-testing which >> I've been told by the openshift-ansible guys should work >> >>> ????Peter >>> >>> On 06/04/2018 20:23, Rich Megginson wrote: >>>> I'm assuming you are running on a CentOS7 machine, recently updated to >>>> the latest base packages. Please confirm. >>>> >>>> Please provide the output of the following commands: >>>> >>>> sudo yum repolist >>>> >>>> sudo rpm -q ansible >>>> >>>> sudo yum repoquery -i ansible >>>> >>>> sudo rpm -q openshift-ansible >>>> >>>> sudo yum repoquery -i openshift-ansible >>>> >>>> sudo rpm -q origin >>>> >>>> sudo yum repoquery -i origin >>>> >>>> sudo cat >>>> /usr/share/ansible/openshift-ansible/roles/lib_utils/callback_plugins/aa_version_requirement.py >>>> >>>> >>>> >>>> sudo ls -alrtF /etc/origin/logging >>>> >>>> Please confirm that you followed the steps listed in the link below, >>>> including the use of the ansible inventory, vars.yaml.template, and repo >>>> files: >>>> https://github.com/richm/Main/blob/7e663351dc371b7895564072c7656ebfda45068d/README-install.md >>>> >>>> >>>> >>>> On 04/06/2018 03:19 AM, Peter Hudec wrote: >>>>> first issue is ansible version, could be solved by virtual env >>>>> >>>>> FATAL: Current Ansible version (2.4.2.0) is not supported. Supported >>>>> versions: 2.4.3.0 or newer >>>>> >>>>> yum install -y python-virtualenv >>>>> virtualenv ansible >>>>> . ./ansible/bin/activate >>>>> pip install -U pip setuptolls >>>>> pip install -U pip setuptools >>>>> pip install ansible >>>>> >>>>> >>>>> Second issue is a little bit strange for me >>>>> >>>>> 2018-04-06 10:00:30,264 p=68226 u=root |? Failure summary: >>>>> >>>>> >>>>> ??? 1. Hosts:??? localhost >>>>> ?????? Play:???? OpenShift Aggregated Logging >>>>> ?????? Task:???? pulling down signing items from host >>>>> ?????? Message:? ESC[0;31mAll items completedESC[0m >>>>> >>>>> I have found in logs >>>>> >>>>> 2018-04-06 10:00:28,356 p=68226 u=root |? failed: [localhost] >>>>> (item=ca.crl.srl) => { >>>>> ????? "changed": false, >>>>> ????? "invocation": { >>>>> ????????? "module_args": { >>>>> ????????????? "src": "/etc/origin/logging/ca.crl.srl" >>>>> ????????? } >>>>> ????? }, >>>>> ????? "item": "ca.crl.srl", >>>>> ????? "msg": "file not found: /etc/origin/logging/ca.crl.srl" >>>>> >>>>> >>>>> Is this good or bad ? >>>>> >>>>> ?????Peter >>>>> >>>>> On 05/04/2018 16:11, Rich Megginson wrote: >>>>>> Is it possible that you could start over from scratch, using the >>>>>> latest >>>>>> instructions/files at >>>>>> https://github.com/ViaQ/Main/pull/37/files? >>>>>> >>>>>> On 04/05/2018 07:19 AM, Peter Hudec wrote: >>>>>>> The version is from >>>>>>> >>>>>>> /usr/share/ansible/openshift-ansible/roles/openshift_facts/library/openshift_facts.py:get_openshift_version >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> [PROD] root at dipostat01.cnc.sk: /usr/share/ansible/openshift-ansible # >>>>>>> /usr/bin/openshift version >>>>>>> openshift v3.10.0-alpha.0+f0186dd-401 >>>>>>> kubernetes v1.9.1+a0ce1bc657 >>>>>>> etcd 3.2.16 >>>>>>> >>>>>>> this binary is from the origin-3.7.2-1.el7.git.0.f0186dd.x86_64 >>>>>>> package >>>>>>> >>>>>>> [PROD] root at dipostat01.cnc.sk: ~ # rpm -qf /usr/bin/openshift >>>>>>> origin-3.7.2-1.el7.git.0.f0186dd.x86_64 >>>>>>> >>>>>>> Hmm, why the version do not match ? >>>>>>> >>>>>>> ??????Peter >>>>>>> >>>>>>> On 04/04/2018 17:41, Shirly Radco wrote: >>>>>>>> Hi, >>>>>>>> >>>>>>>> >>>>>>>> I have a updated the installation instructions for installing >>>>>>>> OpenShift >>>>>>>> 3.9, based on Rich's work , for the oVirt use case. >>>>>>>> >>>>>>>> Please make sure where you get the 3.10 rpm and disable that repo. >>>>>>>> >>>>>>>> This is the PR that includes the metrics store installation of >>>>>>>> OpenShift 3.9 >>>>>>>> >>>>>>>> https://github.com/sradco/ovirt-site/blob/74f1e772c8ca75d4b9e57a3c02cce49c5030f7f7/source/develop/release-management/features/metrics/setting-up-viaq-logging.html.md >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> It should be merged soon, but you can use it to install. >>>>>>>> >>>>>>>> >>>>>>>> Please make sure to add the?ansible-inventory-origin-39-aio file as >>>>>>>> described below. >>>>>>>> These are required parameters for the ansible playbook. >>>>>>>> >>>>>>>> >>>>>>>> Best regards, >>>>>>>> >>>>>>>> -- >>>>>>>> >>>>>>>> SHIRLY?RADCO >>>>>>>> >>>>>>>> BI SeNIOR SOFTWARE ENGINEER >>>>>>>> >>>>>>>> Red Hat?Israel >>>>>>>> >>>>>>>> >>>>>>>> TRIED. TESTED. TRUSTED. >>>>>>>> >>>>>>>> >>>>>>>> On Wed, Apr 4, 2018 at 5:41 PM, Rich Megginson >>>>>>> > wrote: >>>>>>>> >>>>>>>> ?????? I'm sorry.? I misunderstood the request. >>>>>>>> >>>>>>>> ?????? We are in the process of updating the instructions for >>>>>>>> installing >>>>>>>> ?????? viaq logging based on upstream origin 3.9 - >>>>>>>> ?????? https://github.com/ViaQ/Main/pull/37 >>>>>>>> ?????? >>>>>>>> >>>>>>>> ?????? In the meantime, you can follow along on that PR, and we will >>>>>>>> have >>>>>>>> ?????? instructions very soon. >>>>>>>> >>>>>>>> >>>>>>>> ?????? On 04/04/2018 08:26 AM, Rich Megginson wrote: >>>>>>>> >>>>>>>> ?????????? On 04/04/2018 08:22 AM, Shirly Radco wrote: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> ?????????????? -- >>>>>>>> >>>>>>>> ?????????????? SHIRLY RADCO >>>>>>>> >>>>>>>> ?????????????? BI SeNIOR SOFTWARE ENGINEER >>>>>>>> >>>>>>>> ?????????????? Red Hat Israel >>>>>>>> >>>>>>>> ?????????????? >>>>>>>> ?????????????? TRIED. TESTED. TRUSTED. >>>>>>>> >>>>>>>> >>>>>>>> ?????????????? On Wed, Apr 4, 2018 at 5:07 PM, Peter Hudec >>>>>>>> >>>>>>> ?????????????? >>>>>>> ?????????????? >> wrote: >>>>>>>> >>>>>>>> ?????????????? ??? almost the same issue, the versio for openshoft >>>>>>>> release >>>>>>>> ?????????????? changed to 3.9 >>>>>>>> >>>>>>>> ?????????????? ??? Failure summary: >>>>>>>> >>>>>>>> >>>>>>>> ?????????????? ??? ? 1. Hosts:? ? localhost >>>>>>>> ?????????????? ??? ? ? ?Play:? ? ?Determine openshift_version to >>>>>>>> configure >>>>>>>> ?????????????? on first >>>>>>>> ?????????????? ??? master >>>>>>>> ?????????????? ??? ? ? ?Task:? ? ?For an RPM install, abort when the >>>>>>>> release >>>>>>>> ?????????????? ??? requested does >>>>>>>> ?????????????? ??? not match the available version. >>>>>>>> ?????????????? ??? ? ? ?Message:? You requested openshift_release >>>>>>>> 3.9, >>>>>>>> ?????????????? which is not >>>>>>>> ?????????????? ??? matched by >>>>>>>> ?????????????? ??? ? ? ? ? ? ? ? ?the latest OpenShift RPM we >>>>>>>> detected as >>>>>>>> ?????????????? origin-3.10.0 >>>>>>>> ?????????????? ??? ? ? ? ? ? ? ? ?on host localhost. >>>>>>>> ?????????????? ??? ? ? ? ? ? ? ? ?We will only install the latest >>>>>>>> RPMs, so >>>>>>>> ?????????????? please ensure >>>>>>>> ?????????????? ??? you are getting the release >>>>>>>> ?????????????? ??? ? ? ? ? ? ? ? ?you expect. You may need to adjust >>>>>>>> your >>>>>>>> ?????????????? Ansible >>>>>>>> ?????????????? ??? inventory, modify the repositories >>>>>>>> ?????????????? ??? ? ? ? ? ? ? ? ?available on the host, or run the >>>>>>>> ?????????????? appropriate OpenShift >>>>>>>> ?????????????? ??? upgrade playbook. >>>>>>>> >>>>>>>> >>>>>>>> ?????????????? What is the rpm version installed of >>>>>>>> OpenShift?origin? >>>>>>>> ?????????????? Do you perhaps have another repo that includes the >>>>>>>> OpenShift >>>>>>>> ?????????????? origin-3.10.0? >>>>>>>> >>>>>>>> >>>>>>>> ?????????? origin is the upstream version of OpenShift, which is >>>>>>>> unsupported. >>>>>>>> >>>>>>>> ?????????? sudo repoquery -i origin >>>>>>>> >>>>>>>> ?????????? This will tell you which repo it came from >>>>>>>> >>>>>>>> ?????????? You will need to disable that repo and uninstall any >>>>>>>> packages >>>>>>>> ?????????? which came from that repo >>>>>>>> >>>>>>>> ?????????? Another mystery is why it is trying to install origin >>>>>>>> in the >>>>>>>> ?????????? first place.? openshift-ansible with >>>>>>>> ?????????? openshift_deployment_type=openshift-enterprise should not >>>>>>>> try to >>>>>>>> ?????????? install origin, it should install packages with names >>>>>>>> like >>>>>>>> ?????????? atomic-openshift-master, atomic-openshift-node, etc. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> ?????????????? ??? On 04/04/2018 14:18, Shirly Radco wrote: >>>>>>>> ?????????????? ??? > Adding Nicolas since he hit the same issue. >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? > -- >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? > SHIRLY?RADCO >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? > BI SeNIOR SOFTWARE ENGINEER >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? > Red Hat?Israel >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? > TRIED. TESTED. TRUSTED. >>>>>>>> >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? > On Wed, Apr 4, 2018 at 3:17 PM, Shirly Radco >>>>>>>> ?????????????? >>>>>>>> ?????????????? > >>>>>>>> ?????????????? ??? > >>>>>>> >>>>>>>> ?????????????? >>>>>>> >>> >>>>>>>> wrote: >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?Hi Peter, >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?The installation instructions currently >>>>>>>> support >>>>>>>> ?????????????? OpenShift 3.6. >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?I'm now working on updating them to support >>>>>>>> 3.9. >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?You currently have 3.10 installed. >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?Please install OpenShift 3.9 using this >>>>>>>> repository >>>>>>>> ?????????????? ??? > >>>>>>>> >>>>>>>> https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>>> > >>>>>>>> ?????????????? ??? > >>>>>>>> >>>>>>>> ???>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>>> >> >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?And add the following file to your vm >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?Run: >>>>>>>> ?????????????? ??? >? ? ?vi /root/ansible-inventory-origin-39-aio >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?Add: >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?-------------- >>>>>>>> ?????????????? ??? >? ? ?[OSEv3:children] >>>>>>>> ?????????????? ??? >? ? ?nodes >>>>>>>> ?????????????? ??? >? ? ?masters >>>>>>>> ?????????????? ??? >? ? ?etcd >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?[OSEv3:vars] >>>>>>>> ?????????????? ??? >? ? ?ansible_connection=local >>>>>>>> ?????????????? ??? >? ? ?openshift_release=v3.9 >>>>>>>> ?????????????? ??? >? ? ?openshift_logging_install_logging=true >>>>>>>> ?????????????? ??? >? ? ?short_version=3.9 >>>>>>>> ?????????????? ??? >? ? ?openshift_deployment_type=origin >>>>>>>> ?????????????? ??? > >>>>>>>> >>>>>>>> ?openshift_master_identity_providers=[{'mappingMethod': >>>>>>>> ?????????????? 'lookup', >>>>>>>> ?????????????? ??? >? ? ?'challenge': 'true', 'login': 'true', >>>>>>>> 'kind': >>>>>>>> ?????????????? ??? >? ? ?'AllowAllPasswordIdentityProvider', 'name': >>>>>>>> ?????????????? 'allow_all'}] >>>>>>>> ?????????????? ??? >? ? ?# bug - doesn't use correct tag >>>>>>>> ?????????????? ??? >? ? ?openshift_logging_image_version=v3.9 >>>>>>>> ?????????????? ??? > >>>>>>>> >>>>>>>> ??openshift_logging_elasticsearch_proxy_image_version=v1.0.0 >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?openshift_logging_es_allow_external=True >>>>>>>> ?????????????? ??? >? ? ?openshift_logging_use_mux=True >>>>>>>> ?????????????? ??? >? ? ?openshift_logging_mux_allow_external=True >>>>>>>> ?????????????? ??? > >>>>>>>> ???openshift_logging_mux_file_buffer_storage_type=hostmount >>>>>>>> ?????????????? ??? > >>>>>>>> ???openshift_logging_elasticsearch_storage_type=hostmount >>>>>>>> ?????????????? ??? > >>>>>>>> >>>>>>>> ???openshift_logging_elasticsearch_hostmount_path=/var/lib/elasticsearch >>>>>>>> >>>>>>>> >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?[nodes] >>>>>>>> ?????????????? ??? >? ? ?localhost storage=True >>>>>>>> ?????????????? openshift_node_labels="{'region': >>>>>>>> ?????????????? ??? 'infra'}" >>>>>>>> ?????????????? ??? >? ? ?openshift_schedulable=True >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?[masters] >>>>>>>> ?????????????? ??? >? ? ?localhost storage=True >>>>>>>> ?????????????? openshift_node_labels="{'region': >>>>>>>> ?????????????? ??? 'infra'}" >>>>>>>> ?????????????? ??? >? ? ?openshift_schedulable=True >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?[etcd] >>>>>>>> ?????????????? ??? >? ? ?localhost storage=True >>>>>>>> ?????????????? openshift_node_labels="{'region': >>>>>>>> ?????????????? ??? 'infra'}" >>>>>>>> ?????????????? ??? >? ? ?openshift_schedulable=True >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?------------ >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?Save and exit. >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?***Please make sure that you use /var as >>>>>>>> your >>>>>>>> ?????????????? Elasticsearch >>>>>>>> ?????????????? ??? >? ? ?persistent storage directory. >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?And when you run the OpenShift ansible >>>>>>>> ?????????????? ??? > >>>>>>>> >>>>>>>> ???(https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> > >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> ?????????????? ??? > >>>>>>>> >>>>>>>> ???>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>) >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> ?????????????? ??? >? ? ?use the file you just created like this: >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?# cd /usr/share/ansible/openshift-ansible >>>>>>>> ?????????????? ??? >? ? ?# (or wherever you cloned the git repo if >>>>>>>> using git) >>>>>>>> ?????????????? ??? >? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log >>>>>>>> ansible-playbook >>>>>>>> ?????????????? -vvv -e >>>>>>>> ?????????????? ??? >? ? ?@/root/vars.yaml -i >>>>>>>> ?????????????? /root/*ansible-inventory-origin-39-aio* >>>>>>>> ?????????????? ??? >? ? ?playbooks/byo/config.yml >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?Best regards, >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?-- >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?SHIRLY?RADCO >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?BI SeNIOR SOFTWARE ENGINEER >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?Red Hat?Israel >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ? >>>>>>>> ?????????????? ??? >? ? ?TRIED. TESTED. TRUSTED. >>>>>>>> >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ?On Wed, Apr 4, 2018 at 12:17 PM, Peter >>>>>>>> Hudec >>>>>>>> ?????????????? >>>>>>>> >>>>>>> ?????????????? > >>>>>>>> ?????????????? ??? >? ? ?>>>>>>> >>>>>>>> ?????????????? >>> >>>>>>>> wrote: >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ? ? ?Tried to install ovirt metrics, but got >>>>>>>> error >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log >>>>>>>> ?????????????? ansible-playbook -vvv -e >>>>>>>> ?????????????? ??? >? ? ? ? ?@/root/vars.yaml -i >>>>>>>> ?????????????? /root/ansible-inventory-origin-37-aio >>>>>>>> ?????????????? ??? >? ? ? ? ?playbooks/byo/config.yml >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ? ? ?? 1. Hosts:? ? localhost >>>>>>>> ?????????????? ??? >? ? ? ? ?? ? ?Play:? ? ?Determine >>>>>>>> openshift_version to >>>>>>>> ?????????????? configure >>>>>>>> ?????????????? ??? on first >>>>>>>> ?????????????? ??? >? ? ? ? ?master >>>>>>>> ?????????????? ??? >? ? ? ? ?? ? ?Task:? ? ?For an RPM install, >>>>>>>> abort when >>>>>>>> ?????????????? the release >>>>>>>> ?????????????? ??? >? ? ? ? ?requested does >>>>>>>> ?????????????? ??? >? ? ? ? ?not match the available version. >>>>>>>> ?????????????? ??? >? ? ? ? ?? ? ?Message:? You requested >>>>>>>> openshift_release >>>>>>>> ?????????????? 3.7, >>>>>>>> ?????????????? ??? which is not >>>>>>>> ?????????????? ??? >? ? ? ? ?matched by >>>>>>>> ?????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?the latest OpenShift >>>>>>>> RPM we >>>>>>>> ?????????????? detected as >>>>>>>> ?????????????? ??? origin-3.10.0 >>>>>>>> ?????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?on host localhost. >>>>>>>> ?????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?We will only install the >>>>>>>> latest >>>>>>>> ?????????????? RPMs, so >>>>>>>> ?????????????? ??? please >>>>>>>> ?????????????? ??? >? ? ? ? ?ensure >>>>>>>> ?????????????? ??? >? ? ? ? ?you are getting the release >>>>>>>> ?????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?you expect. You may >>>>>>>> need to >>>>>>>> ?????????????? adjust your >>>>>>>> ?????????????? ??? Ansible >>>>>>>> ?????????????? ??? >? ? ? ? ?inventory, modify the repositories >>>>>>>> ?????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?available on the host, >>>>>>>> or run >>>>>>>> ?????????????? the appropriate >>>>>>>> ?????????????? ??? >? ? ? ? ?OpenShift >>>>>>>> ?????????????? ??? >? ? ? ? ?upgrade playbook. >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ? ? ?? ? ? ? regards >>>>>>>> ?????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ? Peter >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ? ? ?On 04/04/2018 09:13, Fred Rolland >>>>>>>> wrote: >>>>>>>> ?????????????? ??? >? ? ? ? ?> Hi, >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? ??? >? ? ? ? ?> Check these links: >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> >>>>>>>> https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>>> > >>>>>>>> ?????????????? ??? > >>>>>>>> >>>>>>>> ???>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>>> >> >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> >>>>>>>> https://ovirt.org/develop/release-management/features/metrics/metrics-store/ >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> > >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> ?????????????? ??? > >>>>>>>> >>>>>>>> ???>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? ??? >? ? ? ? ?> Regards, >>>>>>>> ?????????????? ??? >? ? ? ? ?> Fred >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? ??? >? ? ? ? ?> On Tue, Apr 3, 2018 at 9:38 AM, >>>>>>>> Anantha >>>>>>>> Raghava >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>> ?????????????? >>>>>>>> ?????????????? ??? >>>>>>> ?????????????? > >>>>>>>> ?????????????? ??? >? ? ? ? ?>>>>>>> ?????????????? >>>>>>>> ?????????????? ??? >>>>>>> ?????????????? >> >>>>>>>> ?????????????? ??? >? ? ? ? ?>>>>>>> ?????????????? >>>>>>>> ?????????????? ??? >>>>>>> ?????????????? > >>>>>>>> ?????????????? ??? >? ? ? ? ?>>>>>>> ?????????????? >>>>>>>> ?????????????? ??? >>>>>>> ?????????????? >>>> >>>>>>>> ?????????????? ??? >? ? ? ? ?> wrote: >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? ??? >? ? ? ? ?>? ? ?Hi, >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? ??? >? ? ? ? ?>? ? ?I see that oVirt DWH is installed >>>>>>>> with >>>>>>>> ?????????????? Version >>>>>>>> ?????????????? ??? 4.2.x. Now, how do I >>>>>>>> ?????????????? ??? >? ? ? ? ?>? ? ?take the reports? I version 3.5, >>>>>>>> we had >>>>>>>> ?????????????? Jasper >>>>>>>> ?????????????? ??? reports module using >>>>>>>> ?????????????? ??? >? ? ? ? ?>? ? ?which we could take utilization >>>>>>>> reports. >>>>>>>> ?????????????? Can we do >>>>>>>> ?????????????? ??? something similar >>>>>>>> ?????????????? ??? >? ? ? ? ?>? ? ?here? >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? ??? >? ? ? ? ?>? ? ?-- >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? ??? >? ? ? ? ?>? ? ?Thanks & Regards, >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? ??? >? ? ? ? ?>? ? ?Anantha Raghava >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? ??? >? ? ? ? ?>? ? ?Do not print this e-mail unless >>>>>>>> ?????????????? required. Save >>>>>>>> ?????????????? ??? Paper & trees. >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ???_______________________________________________ >>>>>>>> ?????????????? ??? >? ? ? ? ?>? ? ?Users mailing list >>>>>>>> ?????????????? ??? >? ? ? ? ?> Users at ovirt.org >>>>>>>> >>>>>>>> ?????????????? > >>>>>>>> ?????????????? ??? >>>>>>>> ?????????????? >> >>>>>>>> ?????????????? ??? >? ? ? ? ?>>>>>>> ?????????????? >>>>>>> ?????????????? > >>>>>>>> ?????????????? ??? >>>>>>>> ?????????????? >>> >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? http://lists.ovirt.org/mailman/listinfo/users >>>>>>>> ?????????????? >>>>>>>> ?????????????? ??? >>>>>>> ?????????????? > >>>>>>>> ?????????????? ??? > ?>>>>>>> ?????????????? >>>>>>>> ?????????????? ??? >>>>>>> ?????????????? >> >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? ?>>>>>>> ?????????????? >>>>>>>> ?????????????? ??? >>>>>>> ?????????????? > >>>>>>>> ?????????????? ??? > ?>>>>>>> ?????????????? >>>>>>>> ?????????????? >>>>>>> ?????????????? >>> >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> _______________________________________________ >>>>>>>> ?????????????? ??? >? ? ? ? ?> Users mailing list >>>>>>>> ?????????????? ??? >? ? ? ? ?> Users at ovirt.org >>>>>>>> >>>>>>>> ?????????????? > >>>>>>>> ?????????????? ??? >>>>>>>> ?????????????? >> >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? http://lists.ovirt.org/mailman/listinfo/users >>>>>>>> ?????????????? >>>>>>>> ?????????????? ??? >>>>>>> ?????????????? > >>>>>>>> ?????????????? ??? > ?>>>>>>> ?????????????? >>>>>>>> ?????????????? ??? >>>>>>> ?????????????? >> >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ? ? ?-- >>>>>>>> ?????????????? ??? >? ? ? ? ?*Peter Hudec* >>>>>>>> ?????????????? ??? >? ? ? ? ?Infra?trukt?rny architekt >>>>>>>> ?????????????? ??? > phudec at cnc.sk >>>>>>>> ?????????????? > >>>>>>>> ?????????????? >>>>>>>> ?????????????? ??? >> >>>>>>>> ?????????????? >>>>>>>> ?????????????? > >>>>>>>> ?????????????? ??? >?????? ?>>>>>>> >>>>>>>> ?????????????? >>> >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ? ? ?*CNC,?a.s.* >>>>>>>> ?????????????? ??? >? ? ? ? ?Borsk? 6,?841 04 Bratislava >>>>>>>> ?????????????? ??? >? ? ? ? ?Recepcia:?+421 2? 35 000 100 >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? >? ? ? ? ?Mobil:+421?905 997 203 >>>>>>>> ?????????????? ??? >? ? ? ? ?*www.cnc.sk >>>>>>>> ?????????????? * >>>>>>>> ?????????????? ??? >>>>>>>> >>>>>>>> ?????????????? ??? >? ? ? ? ?> >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? > >>>>>>>> ???_______________________________________________ >>>>>>>> ?????????????? ??? >? ? ? ? ?Users mailing list >>>>>>>> ?????????????? ??? > Users at ovirt.org >>>>>>>> ?????????????? > >>>>>>>> ?????????????? >>>>>>>> ?????????????? ??? >>>>>>> >> >>>>>>>> ?????????????? ??? > http://lists.ovirt.org/mailman/listinfo/users >>>>>>>> ?????????????? >>>>>>>> ?????????????? ??? >>>>>>> ?????????????? > >>>>>>>> ?????????????? ??? > ?>>>>>>> ?????????????? >>>>>>>> ?????????????? ??? >>>>>>> ?????????????? >> >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? > >>>>>>>> ?????????????? ??? > >>>>>>>> >>>>>>>> >>>>>>>> ?????????????? ??? -- >>>>>>>> ?????????????? ??? *Peter Hudec* >>>>>>>> ?????????????? ??? Infra?trukt?rny architekt >>>>>>>> ?????????????? ??? phudec at cnc.sk >>>>>>>> ?????????????? > >>>>>>>> ?????????????? >>>>>>>> ?????????????? ??? >> >>>>>>>> >>>>>>>> ?????????????? ??? *CNC,?a.s.* >>>>>>>> ?????????????? ??? Borsk? 6,?841 04 Bratislava >>>>>>>> ?????????????? ??? Recepcia:?+421 2? 35 000 100 >>>>>>>> >>>>>>>> ?????????????? ??? Mobil:+421?905 997 203 >>>>>>>> ?????????????? ??? *www.cnc.sk >>>>>>>> * >>>>>>>> ?????????????? >>>>>>>> ?????????????? ??? > >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> > From cboggio at inlinenetworks.com Sat Apr 7 12:27:58 2018 From: cboggio at inlinenetworks.com (Clint Boggio) Date: Sat, 7 Apr 2018 12:27:58 +0000 Subject: [ovirt-users] Cluster Processor Change Message-ID: Forgive me if this is a duplicate, as I had spam filter problems previously when I sent this inquiry. Environment Rundown: OVirt 4.2 6 CentOS 7.4 Compute Nodes Intel Xeon 1 CentOS 7.4 Dedicated Engine Node Intel Xeon 1 Datacenter 1 Storage Domain 1 Cluster 10Gig-E iSCSI Storage 10Gig-E NFS Export Domain 20 VM?s of various OS?s and uses The current cluster is using the Nehalem architecture. I?ve got the deploy two new VMs that the current system will not allow me to configure with the Nehalem based cluster, so I?ve got to bump up the architecture of the cluster to accommodate them. Before i shut down all the current VMs to upgrade the cluster, I have some questions about the effect this is going to have on the environment. 1. Will all of the current VM?s use the legacy processor architecture or will I have to change them ? 2. Can I elevate the cluster processor functionality higher than the underlying hardware architecture ? 3. In regards to the new cluster processor, will all of the processor architectures below the one I choose be an option for the existing and future VMs ? I apologize for the long post and I hope that I haven?t left out any vital information. From vincent at epicenergy.ca Sun Apr 8 04:02:04 2018 From: vincent at epicenergy.ca (Vincent Royer) Date: Sat, 7 Apr 2018 21:02:04 -0700 Subject: [ovirt-users] Node health bad after power outage Message-ID: Suffered a long power outage that outlasted our huge UPS, so both my nodes went down. Upon return, the nodes came back up but engine did not start because the storage server takes longer to boot than the nodes do, so the NFS mounts didn't reconnect. I manually re-entered the mounts using cockpit, rebooted the nodes and the engine came back up along with all VMs. Now in cockpit under Node Status, It says Health: bad, and these messages: Everything seems to be working fine though. -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 19079 bytes Desc: not available URL: From ahadas at redhat.com Sun Apr 8 06:44:35 2018 From: ahadas at redhat.com (Arik Hadas) Date: Sun, 8 Apr 2018 09:44:35 +0300 Subject: [ovirt-users] Is compatibility level change required for upgrading from 4.0 to 4.2? In-Reply-To: References: <8B60E182-D79F-4BAD-824C-D700B1E36593@redhat.com> Message-ID: On Fri, Apr 6, 2018 at 12:28 PM, Luca 'remix_tj' Lorenzetto < lorenzetto.luca at gmail.com> wrote: > On Fri, Apr 6, 2018 at 11:05 AM, Michal Skrivanek > wrote: > > > > you just need to keep the supported versions in mind. Version 4.2 > supports > > Cluster levels 3.6, 4.0, 4.1(same as version 4.1) - so any of them is ok > > > > Perfect, thank you for the confirmation. > > To change the compatibility level of DC, i've seen that all clusters > require has to be upgraded. > Does the upgrade of the DC requires the restart of all the VMs to have > the cluster completely upgraded or restarting the VMs is an activity > indipendent from this? > You won't have to restart the running VMs. You'll see that VMs that were running at the time of the cluster upgrade are set with custom-compatibility-version that matches the previous compatibilty-level of the cluster. So obviously, VM-specific features that were added in 4.2 won't be applicable to those VMs until they are restarted (and then their custom-compatibility version is cleared so their effective compability-level would change to 4.2). But even when some VMs are set with custom-compatibility-version, the cluster is upgraded and so it should be possible to upgrade the DC. > > Luca > > > > -- > "E' assurdo impiegare gli uomini di intelligenza eccellente per fare > calcoli che potrebbero essere affidati a chiunque se si usassero delle > macchine" > Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716) > > "Internet ? la pi? grande biblioteca del mondo. > Ma il problema ? che i libri sono tutti sparsi sul pavimento" > John Allen Paulos, Matematico (1945-vivente) > > Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , < > lorenzetto.luca at gmail.com> > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dhy336 at sina.com Sun Apr 8 06:46:44 2018 From: dhy336 at sina.com (dhy336 at sina.com) Date: Sun, 08 Apr 2018 14:46:44 +0800 Subject: [ovirt-users] =?gbk?b?u9i4tKO6UmU6ICBvdmlydCBlbmdpbmUgSEE=?= Message-ID: <20180408064644.77191A801BF@webmail.sinamail.sina.com.cn> Hi, I hava two node, and deploy hosted-engine by #hosted-engine --deploy, I do not understand what should I do? ----- ???? ----- ????Alex K ????FERNANDO FREDIANI ????users ???Re: [ovirt-users] ovirt engine HA ???2018?04?04? 01?40? In case you need HA for the engine you need to deploy it to other hosts also through the GUI. On Tue, Apr 3, 2018 at 4:47 PM, FERNANDO FREDIANI wrote: Is it enough to deploy the Self-Hosted engine in just one Host of the cluster or is it necessary to repeat the process in each of the nodes that must be able to run it ? Thanks Fernando 2018-04-03 2:01 GMT-03:00 Vincent Royer : Same thing, the engine in this case is "self-hosted", as in, it runs in a VM hosted on the cluster that it is managing. I am a beginner here, but from my understanding, each node is always checking on the health of the engine VM. If the engine is missing (ie, the host running it has gone down), then another available, healthy host will spawn up the engine and you will regain access. In my experience this has worked very reliably. I have 2 hosts, both are "able" to run the engine VM. If I take one host down, I am not able to load the engine GUI. But if I wait a few minutes, then I regain access, and see that the engine is now running on the remaining healthy host. Vincent Royer778-825-1057 SUSTAINABLE MOBILE ENERGY SOLUTIONS On Mon, Apr 2, 2018 at 6:07 PM, wrote: what different between self-hosted engine and hosted engine? I find a project ovirt-hosted-engine-ha https://github.com/oVirt/ovirt-hosted-engine-ha ----- ???? ----- ????Vincent Royer ????dhy336 at sina.com ????users ???Re: [ovirt-users] ovirt engine HA ???2018?04?03? 08?57? If your node running self-hosted engine crashes, the hosted engine will be started up on another node. It just takes a few minutes for this all to happen, but it works reliably in my experience. On Mon, Apr 2, 2018 at 5:42 PM, wrote: How to solute ovirt engine HA, I have a three node cluster, one of is deploy engine and node , others are node, if node that deplay engine and node crash, How to ensure my server is up? _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users -------------- next part -------------- An HTML attachment was scrubbed... URL: From sizzlinsaguaro at gmail.com Wed Apr 4 18:19:33 2018 From: sizzlinsaguaro at gmail.com (Cole Johnson) Date: Wed, 4 Apr 2018 11:19:33 -0700 Subject: [ovirt-users] Can't sync networks Message-ID: Hello, I am trying to set up a 3 host gluster hyperconverged self hosted engine running on oVirt Nodes. ( I think that I have all of the buzzwords here) All of the hardware is the same. I am using the guide from here: https://www.ovirt.org/blog/2018/02/up-and-running-with-ovirt-4-2-and-gluster-storage/ and the documentation here: https://www.ovirt.org/documentation/gluster-hyperconverged/Gluster_Hyperconverged_Guide/ for reference. I have used the setup wizards from the cockpit interface to setup gluster and the hosted engine successfully. I have configured the gluster storage and setup all of the hosts inside the hosted engine. My problem occurs when I try to configure a separate storage network as shown in the blog post. I can get thru the process as outlined, on all three hosts, but the status will not change from "out-of-sync". I can press the "Sync All Networks", and I get a notification which says "Finished SyncAllHostNetworks", but the status of the storage network remains "out-of-sync" . I don't know if this is related, but I cannot migrate the HostedEngine vm between hosts. I have attached the contents of vdsm.log Any help is appreciated. -------------- next part -------------- A non-text attachment was scrubbed... Name: vdsm.log.xz Type: application/octet-stream Size: 519644 bytes Desc: not available URL: From lorenzetto.luca at gmail.com Sun Apr 8 07:42:28 2018 From: lorenzetto.luca at gmail.com (Luca 'remix_tj' Lorenzetto) Date: Sun, 08 Apr 2018 07:42:28 +0000 Subject: [ovirt-users] Is compatibility level change required for upgrading from 4.0 to 4.2? In-Reply-To: References: <8B60E182-D79F-4BAD-824C-D700B1E36593@redhat.com> Message-ID: Il dom 8 apr 2018, 08:44 Arik Hadas ha scritto: > > > On Fri, Apr 6, 2018 at 12:28 PM, Luca 'remix_tj' Lorenzetto < > lorenzetto.luca at gmail.com> wrote: > >> On Fri, Apr 6, 2018 at 11:05 AM, Michal Skrivanek >> wrote: >> > >> > you just need to keep the supported versions in mind. Version 4.2 >> supports >> > Cluster levels 3.6, 4.0, 4.1(same as version 4.1) - so any of them is ok >> > >> >> Perfect, thank you for the confirmation. >> >> To change the compatibility level of DC, i've seen that all clusters >> require has to be upgraded. >> Does the upgrade of the DC requires the restart of all the VMs to have >> the cluster completely upgraded or restarting the VMs is an activity >> indipendent from this? >> > > You won't have to restart the running VMs. > You'll see that VMs that were running at the time of the cluster upgrade > are set with custom-compatibility-version that matches the previous > compatibilty-level of the cluster. So obviously, VM-specific features that > were added in 4.2 won't be applicable to those VMs until they are restarted > (and then their custom-compatibility version is cleared so their effective > compability-level would change to 4.2). > But even when some VMs are set with custom-compatibility-version, the > cluster is upgraded and so it should be possible to upgrade the DC. > Fantastic. Thanks for the explanation. I like to have a better knowledge of what happens behind the scenes, because helps me to solve problems when they appear. Luca > >> >> Luca >> >> >> >> -- >> "E' assurdo impiegare gli uomini di intelligenza eccellente per fare >> calcoli che potrebbero essere affidati a chiunque se si usassero delle >> macchine" >> Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716) >> >> "Internet ? la pi? grande biblioteca del mondo. >> Ma il problema ? che i libri sono tutti sparsi sul pavimento" >> John Allen Paulos, Matematico (1945-vivente) >> >> Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , < >> lorenzetto.luca at gmail.com> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dhy336 at sina.com Sun Apr 8 10:15:18 2018 From: dhy336 at sina.com (dhy336 at sina.com) Date: Sun, 08 Apr 2018 18:15:18 +0800 Subject: [ovirt-users] =?gbk?b?u9i4tKO6ILvYuLSjulJlOiAgb3ZpcnQgZW5naW5l?= =?gbk?q?_HA?= Message-ID: <20180408101518.E45C64800AC@webmail.sinamail.sina.com.cn> Hi, I hava two node, and deploy hosted-engine by #hosted-engine --deploy, I find two hosted-engine that i deploied is independent, how to make my hosted-engine is HA? ----- ???? ----- ????Alex K ????FERNANDO FREDIANI ????users ???Re: [ovirt-users] ovirt engine HA ???2018?04?04? 01?40? In case you need HA for the engine you need to deploy it to other hosts also through the GUI. On Tue, Apr 3, 2018 at 4:47 PM, FERNANDO FREDIANI wrote: Is it enough to deploy the Self-Hosted engine in just one Host of the cluster or is it necessary to repeat the process in each of the nodes that must be able to run it ? Thanks Fernando 2018-04-03 2:01 GMT-03:00 Vincent Royer : Same thing, the engine in this case is "self-hosted", as in, it runs in a VM hosted on the cluster that it is managing. I am a beginner here, but from my understanding, each node is always checking on the health of the engine VM. If the engine is missing (ie, the host running it has gone down), then another available, healthy host will spawn up the engine and you will regain access. In my experience this has worked very reliably. I have 2 hosts, both are "able" to run the engine VM. If I take one host down, I am not able to load the engine GUI. But if I wait a few minutes, then I regain access, and see that the engine is now running on the remaining healthy host. Vincent Royer778-825-1057 SUSTAINABLE MOBILE ENERGY SOLUTIONS On Mon, Apr 2, 2018 at 6:07 PM, wrote: what different between self-hosted engine and hosted engine? I find a project ovirt-hosted-engine-ha https://github.com/oVirt/ovirt-hosted-engine-ha ----- ???? ----- ????Vincent Royer ????dhy336 at sina.com ????users ???Re: [ovirt-users] ovirt engine HA ???2018?04?03? 08?57? If your node running self-hosted engine crashes, the hosted engine will be started up on another node. It just takes a few minutes for this all to happen, but it works reliably in my experience. On Mon, Apr 2, 2018 at 5:42 PM, wrote: How to solute ovirt engine HA, I have a three node cluster, one of is deploy engine and node , others are node, if node that deplay engine and node crash, How to ensure my server is up? _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users -------------- next part -------------- An HTML attachment was scrubbed... URL: From rightkicktech at gmail.com Sun Apr 8 11:45:01 2018 From: rightkicktech at gmail.com (Alex K) Date: Sun, 08 Apr 2018 11:45:01 +0000 Subject: [ovirt-users] =?utf-8?b?5Zue5aSN77yaUmU6IG92aXJ0IGVuZ2luZSBIQQ==?= In-Reply-To: <20180408101518.E45C64800AC@webmail.sinamail.sina.com.cn> References: <20180408101518.E45C64800AC@webmail.sinamail.sina.com.cn> Message-ID: Are you a troll? On Sun, Apr 8, 2018, 12:15 wrote: > > Hi, I hava two node, and deploy hosted-engine by #hosted-engine --deploy, > I find two hosted-engine that i deploied is independent, how to make my > hosted-engine is HA? > > ----- ???? ----- > ????Alex K > ????FERNANDO FREDIANI > ????users > ???Re: [ovirt-users] ovirt engine HA > ???2018?04?04? 01?40? > > In case you need HA for the engine you need to deploy it to other hosts > also through the GUI. > > > On Tue, Apr 3, 2018 at 4:47 PM, FERNANDO FREDIANI < > fernando.frediani at upx.com> wrote: > > Is it enough to deploy the Self-Hosted engine in just one Host of the > cluster or is it necessary to repeat the process in each of the nodes that > must be able to run it ? > > Thanks > Fernando > > 2018-04-03 2:01 GMT-03:00 Vincent Royer : > > Same thing, the engine in this case is "self-hosted", as in, it runs in a > VM hosted on the cluster that it is managing. I am a beginner here, but > from my understanding, each node is always checking on the health of the > engine VM. If the engine is missing (ie, the host running it has gone > down), then another available, healthy host will spawn up the engine and > you will regain access. > > In my experience this has worked very reliably. I have 2 hosts, both are > "able" to run the engine VM. If I take one host down, I am not able to > load the engine GUI. But if I wait a few minutes, then I regain access, > and see that the engine is now running on the remaining healthy host. > > *Vincent Royer* > *778-825-1057 <(778)%20825-1057>* > > > > *SUSTAINABLE MOBILE ENERGY SOLUTIONS* > > > > > On Mon, Apr 2, 2018 at 6:07 PM, wrote: > > what different between self-hosted engine and hosted engine? I find a > project ovirt-hosted-engine-ha > > https://github.com/oVirt/ovirt-hosted-engine-ha > ----- ???? ----- > ????Vincent Royer > ????dhy336 at sina.com > ????users > ???Re: [ovirt-users] ovirt engine HA > ???2018?04?03? 08?57? > > If your node running self-hosted engine crashes, the hosted engine will be > started up on another node. It just takes a few minutes for this all to > happen, but it works reliably in my experience. > > > > On Mon, Apr 2, 2018 at 5:42 PM, wrote: > > How to solute ovirt engine HA, I have a three node cluster, one of is > deploy engine and node , others are node, if node that deplay engine and > node crash, How to ensure my server is up? > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dhy336 at sina.com Sun Apr 8 13:53:31 2018 From: dhy336 at sina.com (dhy336 at sina.com) Date: Sun, 08 Apr 2018 21:53:31 +0800 Subject: [ovirt-users] =?gbk?b?u9i4tKO6UmU6ICC72Li0o7pSZTogb3ZpcnQgZW5n?= =?gbk?q?ine_HA?= Message-ID: <20180408135331.EE3AC1660101@webmail.sinamail.sina.com.cn> sorry. I do not know how to describe my qeustion I want to add a hosted-engine, I use same nfs path with first hosted-engine, but has some error. --== STORAGE CONFIGURATION ==-- Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs3, nfs4)[nfs3]: Please specify the full shared storage connection path to use (example: host:/path): 192.168.122.218:/exports/hosted-engine-test1[ ERROR ] The selected device already contains a storage domain.[ ERROR ] Setup of additional hosts using this software is not allowed anymore. Please use the engine web interface to deploy any additional hosts.[ ERROR ] Failed to execute stage 'Environment customization': Setup of additional hosts using this software is not allowed anymore. Please use the engine web interface to deploy any additional hosts.[ INFO ] Stage: Clean up[ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20180408214554.conf'[ INFO ] Stage: Pre-termination[ INFO ] Stage: Termination[ ERROR ] Hosted Engine deployment failed Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20180408214515-4vofq6.log ----- ???? ----- ????Alex K ????dhy336 at sina.com ????FERNANDO FREDIANI , users ???Re: [ovirt-users] ???Re: ovirt engine HA ???2018?04?08? 19?45? Are you a troll? On Sun, Apr 8, 2018, 12:15 wrote: Hi, I hava two node, and deploy hosted-engine by #hosted-engine --deploy, I find two hosted-engine that i deploied is independent, how to make my hosted-engine is HA? ----- ???? ----- ????Alex K ????FERNANDO FREDIANI ????users ???Re: [ovirt-users] ovirt engine HA ???2018?04?04? 01?40? In case you need HA for the engine you need to deploy it to other hosts also through the GUI. On Tue, Apr 3, 2018 at 4:47 PM, FERNANDO FREDIANI wrote: Is it enough to deploy the Self-Hosted engine in just one Host of the cluster or is it necessary to repeat the process in each of the nodes that must be able to run it ? Thanks Fernando 2018-04-03 2:01 GMT-03:00 Vincent Royer : Same thing, the engine in this case is "self-hosted", as in, it runs in a VM hosted on the cluster that it is managing. I am a beginner here, but from my understanding, each node is always checking on the health of the engine VM. If the engine is missing (ie, the host running it has gone down), then another available, healthy host will spawn up the engine and you will regain access. In my experience this has worked very reliably. I have 2 hosts, both are "able" to run the engine VM. If I take one host down, I am not able to load the engine GUI. But if I wait a few minutes, then I regain access, and see that the engine is now running on the remaining healthy host. Vincent Royer778-825-1057 SUSTAINABLE MOBILE ENERGY SOLUTIONS On Mon, Apr 2, 2018 at 6:07 PM, wrote: what different between self-hosted engine and hosted engine? I find a project ovirt-hosted-engine-ha https://github.com/oVirt/ovirt-hosted-engine-ha ----- ???? ----- ????Vincent Royer ????dhy336 at sina.com ????users ???Re: [ovirt-users] ovirt engine HA ???2018?04?03? 08?57? If your node running self-hosted engine crashes, the hosted engine will be started up on another node. It just takes a few minutes for this all to happen, but it works reliably in my experience. On Mon, Apr 2, 2018 at 5:42 PM, wrote: How to solute ovirt engine HA, I have a three node cluster, one of is deploy engine and node , others are node, if node that deplay engine and node crash, How to ensure my server is up? _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users -------------- next part -------------- An HTML attachment was scrubbed... URL: From i.am.stack at gmail.com Sun Apr 8 14:33:50 2018 From: i.am.stack at gmail.com (~Stack~) Date: Sun, 8 Apr 2018 09:33:50 -0500 Subject: [ovirt-users] How it is oVirt used in your Department? In-Reply-To: <1522233082.6801.129.camel@fis.unical.it> References: <1522233082.6801.129.camel@fis.unical.it> Message-ID: On 03/28/2018 05:31 AM, Fedele Stabile Nuovo Server wrote: > My question is mainly addressed at those of you who use oVirt not only > for creating services on virtual machines. > What is your experience and what did you made? Still consider myself an oVirt newb. Only been using it for a few months but I'm liking it so far. I don't have the hardware specs in front of me but I have a 4 node Hypervisor setup with a physical Engine host. All running on Scientific Linux 7. > Is there anyone who virtualized an HPC cluster? I'm still not convinced that virtualized HPC is a good idea for those who need compute performance. Though it is getting better than when I first heard someone say they were doing it at Supercomputing14! > What is for you the advantage on virtualizing a cluster? Um. As a 14year HPC admin, I still say none for compute. However, I am using oVirt to support a ton of my infrastructure services: Frontends, Log-ins, Scheduler, Database, LDAP, ect. I'm still learning how to set up something where my users can click a button on a webpage and get a VM spun up for a Graphical session on oVirt. I'm also still debating on the pros/cons for setting up oVirt VM's for things like JupyterNotebooks/RStudio Server/ect for the "I just want a web page to develop my code on and will submit to the cluster for the job run" crowd. It is a huge learning process for me. Most of the tools I've been using have worked great for years, but it is time to update and refresh those skills. Most of the provisioning tools I've used in the past don't work so well with oVirt. So now I'm exploring other tools. Foreman is and overcomplicated buggy headache, IMO. Every time I or a coworker has tried to get it going it has been a massive time-suck-crash-and-burn. Add to it that my current security team has HUGE issues with Puppet (don't get me started - I like Puppet) and building Foreman by hand with Salt is just an awful awful awful experience I wouldn't wish on an enemy...just no. :-) DigitalRebar was looking SUPER promising, but they recently went to a model that MUST chat out to the Internet or it breaks itself (a complete no-go for me). A complete shame. So I'm back to Cobbler which is simple and works fantastically well, but doesn't really have any integrations into oVirt (that I'm aware of). I'm probably going to have to write something with the two API's. > Or, having a class with PC or Raspberry is better to use LTSP or PiNet > or virtualize desktops? Can't say. Don't mess with Raspberry Pi's much. ~Stack~ -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: OpenPGP digital signature URL: From a_shilov at inbox.ru Mon Apr 9 05:51:50 2018 From: a_shilov at inbox.ru (=?UTF-8?B?QW50b24gU2hpbG92?=) Date: Mon, 09 Apr 2018 08:51:50 +0300 Subject: [ovirt-users] =?utf-8?q?Ovirt_4=2E2=2E_Isolated_=28host-only=29_n?= =?utf-8?q?etwork?= Message-ID: <1523253110.846942566@f221.i.mail.ru> Hi List! Recently I've started using ovirt 4.2 and faced that I cannot find any guide how to do it in ovirt.org documentation. Need help with configure isolated/host-only (not connect to real NIC) network that allowed to communicate two or more VMs into private network. May be exist a solution? I did it such: linked logical networt to real NIC without connect anywhere (link - DOWN), but this solution is a little bit odd. How to exclude read NIC? ? -------------- next part -------------- An HTML attachment was scrubbed... URL: From frolland at redhat.com Mon Apr 9 07:12:59 2018 From: frolland at redhat.com (Fred Rolland) Date: Mon, 9 Apr 2018 10:12:59 +0300 Subject: [ovirt-users] Fw: Data Operations On Any Host In-Reply-To: References: Message-ID: Hi Jeremy, Yes, this is what I meant. Regards, Fred On Sun, Apr 8, 2018 at 5:42 PM, Cryptic wrote: > > Hi Fred, > > > Thanks for the reply and information. When you say all testing flows were > done with this option do you mean with this option disabled it is possible > I could have issues that would not have been identified during the testing > of this version? > > > Thanks. > Jeremy > > > > ------------------------------ > *From:* Fred Rolland > *Sent:* Tuesday, 3 April 2018 3:58 PM > *To:* Cryptic > *Cc:* users at ovirt.org > *Subject:* Re: [ovirt-users] Fw: Data Operations On Any Host > > Jeremy, > > There is currently no option to restrict the data operations to specific > hosts. > > You can disable this feature in the DB, disable "DataOperationsByHSM" in > the vdc_options table. > > Note that since it is enabled by default since 4.1, all testing flows were > done with this option. > > Regards, > Fred > > On Sun, Apr 1, 2018 at 11:02 AM, Cryptic wrote: > > Hi to all, > > In relation to the changes made to distribute data operations between all > the hosts in a data center rather than burden the SPM. I am very new to > oVirt and am having troubles finding information on this and need > assistance to prevent this happening on my development oVirt 4.2 system. > The issue I have is that I have a cluster which hosts all the storage > volumes using gluster and they have 10G NICs. I also have a separate > cluster which is virtualisation only and each host only has 3 x 1G > aggregated NICs. When I perform disk moves between storage domains it often > uses one of the virtualisation hosts which drastically increases the time > taken to move the disk. Can I restrict these types of operations to a set > of hosts or turn it off altogether so that it just uses the SPM like it > used to in the past. Distributing it is a great feature but unfortunately > is no good in my current setup. > > Regards, > Jeremy > > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dholler at redhat.com Mon Apr 9 07:54:53 2018 From: dholler at redhat.com (Dominik Holler) Date: Mon, 9 Apr 2018 09:54:53 +0200 Subject: [ovirt-users] Can't sync networks In-Reply-To: References: Message-ID: <20180409095453.112d9684@t460p> On Wed, 4 Apr 2018 11:19:33 -0700 Cole Johnson wrote: > Hello, > I am trying to set up a 3 host gluster hyperconverged self hosted > engine running on oVirt Nodes. ( I think that I have all of the > buzzwords here) All of the hardware is the same. I am using the guide > from here: > https://www.ovirt.org/blog/2018/02/up-and-running-with-ovirt-4-2-and-gluster-storage/ > and the documentation here: > https://www.ovirt.org/documentation/gluster-hyperconverged/Gluster_Hyperconverged_Guide/ > for reference. > I have used the setup wizards from the cockpit interface to setup > gluster and the hosted engine successfully. I have configured the > gluster storage and setup all of the hosts inside the hosted engine. > > My problem occurs when I try to configure a separate storage network > as shown in the blog post. I can get thru the process as outlined, on > all three hosts, but the status will not change from "out-of-sync". I > can press the "Sync All Networks", and I get a notification which says > "Finished SyncAllHostNetworks", but the status of the storage network > remains "out-of-sync" . > The "Setup Host Networks" dialog presents the information why the network is marked as "out-of-sync". Does the information presented helps you? > I don't know if this is related, but I cannot migrate the HostedEngine > vm between hosts. > > I have attached the contents of vdsm.log > > Any help is appreciated. From dhy336 at sina.com Mon Apr 9 09:05:53 2018 From: dhy336 at sina.com (dhy336 at sina.com) Date: Mon, 09 Apr 2018 17:05:53 +0800 Subject: [ovirt-users] hosted-engine --deploy ERROR Message-ID: <20180409090553.D6FC319000CD@webmail.sinamail.sina.com.cn> Hi my node is installed by ovirt-node-ng-installer-ovirt-4.2-2018021412.iso, and I deploy hosted-engine, # hosted-engine --deploy [ INFO ] changed: [localhost][ INFO ] TASK [Clean /etc/hosts for the engine VM][ INFO ] changed: [localhost][ INFO ] TASK [Copy /etc/hosts back to the engine VM][ INFO ] changed: [localhost][ INFO ] TASK [Clean /etc/hosts on the host][ ERROR ] fatal: [localhost]: FAILED! => {"msg": "The task includes an option with an undefined variable. The error was: list object has no element 0\n\nThe error appears to have been in '/usr/share/ovirt-hosted-engine-setup/ansible/create_target_vm.yml': line 265, column 5, but may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe offending line appears to be:\n\n tags: [ 'skip_ansible_lint' ]\n - name: Clean /etc/hosts on the host\n ^ here\n\nexception type: \nexception: list object has no element 0"}[ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook[ INFO ] Stage: Clean up[ INFO ] Cleaning temporary resources[ INFO ] TASK [Gathering Facts][ INFO ] ok: [localhost][ INFO ] TASK [Remove local vm dir][ INFO ] changed: [localhost][ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20180409164100.conf'[ INFO ] Stage: Pre-termination[ INFO ] Stage: Termination[ ERROR ] Hosted Engine deployment failed: please check the logs for the issue, fix accordingly or re-deploy from scratch. Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20180409080454-uts7by.log -------------- next part -------------- An HTML attachment was scrubbed... URL: From stirabos at redhat.com Mon Apr 9 10:31:17 2018 From: stirabos at redhat.com (Simone Tiraboschi) Date: Mon, 9 Apr 2018 12:31:17 +0200 Subject: [ovirt-users] hosted-engine --deploy ERROR In-Reply-To: <20180409090553.D6FC319000CD@webmail.sinamail.sina.com.cn> References: <20180409090553.D6FC319000CD@webmail.sinamail.sina.com.cn> Message-ID: On Mon, Apr 9, 2018 at 11:05 AM, wrote: > Hi > > my node is installed by ovirt-node-ng-installer-ovirt-4.2-2018021412.iso, > and I deploy hosted-engine, > # hosted-engine --deploy > > > [ INFO ] changed: [localhost] > [ INFO ] TASK [Clean /etc/hosts for the engine VM] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Copy /etc/hosts back to the engine VM] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Clean /etc/hosts on the host] > [ ERROR ] fatal: [localhost]: FAILED! => {"msg": "The task includes an > option with an undefined variable. The error was: list object has no > element 0\n\nThe error appears to have been in '/usr/share/ovirt-hosted- > engine-setup/ansible/create_target_vm.yml': line 265, column 5, but > may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe > offending line appears to be:\n\n tags: [ 'skip_ansible_lint' ]\n - > name: Clean /etc/hosts on the host\n ^ here\n\nexception type: 'ansible.errors.AnsibleUndefinedVariable'>\nexception: list object has no > element 0"} > [ ERROR ] Failed to execute stage 'Closing up': Failed executing > ansible-playbook > [ INFO ] Stage: Clean up > [ INFO ] Cleaning temporary resources > [ INFO ] TASK [Gathering Facts] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Remove local vm dir] > [ INFO ] changed: [localhost] > [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine- > setup/answers/answers-20180409164100.conf' > [ INFO ] Stage: Pre-termination > [ INFO ] Stage: Termination > [ ERROR ] Hosted Engine deployment failed: please check the logs for the > issue, fix accordingly or re-deploy from scratch. > Log file is located at /var/log/ovirt-hosted-engine- > setup/ovirt-hosted-engine-setup-20180409080454-uts7by.log > > > Hi, according to the error it seams that the playbook wasn't able to fetch the IP address got by the local VM on the default libvirt natted network but it's pretty strange since it shouldn't reach that stage in that case. Can you please attach the whole log file? > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From stirabos at redhat.com Mon Apr 9 10:32:12 2018 From: stirabos at redhat.com (Simone Tiraboschi) Date: Mon, 9 Apr 2018 12:32:12 +0200 Subject: [ovirt-users] =?utf-8?b?5Zue5aSN77yaUmU6IOWbnuWkje+8mlJlOiBvdmly?= =?utf-8?q?t_engine_HA?= In-Reply-To: <20180408135331.EE3AC1660101@webmail.sinamail.sina.com.cn> References: <20180408135331.EE3AC1660101@webmail.sinamail.sina.com.cn> Message-ID: On Sun, Apr 8, 2018 at 3:53 PM, wrote: > sorry. I do not know how to describe my qeustion > I want to add a hosted-engine, I use same nfs path with first > hosted-engine, but has some error. > --== STORAGE CONFIGURATION ==-- > > Please specify the storage you would like to use (glusterfs, > iscsi, fc, nfs3, nfs4)[nfs3]: > Please specify the full shared storage connection path to use > (example: host:/path): 192.168.122.218:/exports/hosted-engine-test1 > [ ERROR ] The selected device already contains a storage domain. > [ ERROR ] Setup of additional hosts using this software is not allowed > anymore. Please use the engine web interface to deploy any additional hosts. > Since 4.0 you should add additional hosted-engine hosts directly from the webadmin UI. > [ ERROR ] Failed to execute stage 'Environment customization': Setup of > additional hosts using this software is not allowed anymore. Please use the > engine web interface to deploy any additional hosts. > [ INFO ] Stage: Clean up > [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine- > setup/answers/answers-20180408214554.conf' > [ INFO ] Stage: Pre-termination > [ INFO ] Stage: Termination > [ ERROR ] Hosted Engine deployment failed > Log file is located at /var/log/ovirt-hosted-engine- > setup/ovirt-hosted-engine-setup-20180408214515-4vofq6.log > > > > ----- ???? ----- > ????Alex K > ????dhy336 at sina.com > ????FERNANDO FREDIANI , users > ???Re: [ovirt-users] ???Re: ovirt engine HA > ???2018?04?08? 19?45? > > Are you a troll? > > > On Sun, Apr 8, 2018, 12:15 wrote: > > > Hi, I hava two node, and deploy hosted-engine by #hosted-engine --deploy, > I find two hosted-engine that i deploied is independent, how to make my > hosted-engine is HA? > > ----- ???? ----- > ????Alex K > ????FERNANDO FREDIANI > ????users > ???Re: [ovirt-users] ovirt engine HA > ???2018?04?04? 01?40? > > In case you need HA for the engine you need to deploy it to other hosts > also through the GUI. > > > On Tue, Apr 3, 2018 at 4:47 PM, FERNANDO FREDIANI < > fernando.frediani at upx.com> wrote: > > Is it enough to deploy the Self-Hosted engine in just one Host of the > cluster or is it necessary to repeat the process in each of the nodes that > must be able to run it ? > > Thanks > Fernando > > 2018-04-03 2:01 GMT-03:00 Vincent Royer : > > Same thing, the engine in this case is "self-hosted", as in, it runs in a > VM hosted on the cluster that it is managing. I am a beginner here, but > from my understanding, each node is always checking on the health of the > engine VM. If the engine is missing (ie, the host running it has gone > down), then another available, healthy host will spawn up the engine and > you will regain access. > > In my experience this has worked very reliably. I have 2 hosts, both are > "able" to run the engine VM. If I take one host down, I am not able to > load the engine GUI. But if I wait a few minutes, then I regain access, > and see that the engine is now running on the remaining healthy host. > > *Vincent Royer* > *778-825-1057 <(778)%20825-1057>* > > > > *SUSTAINABLE MOBILE ENERGY SOLUTIONS* > > > > > On Mon, Apr 2, 2018 at 6:07 PM, wrote: > > what different between self-hosted engine and hosted engine? I find a > project ovirt-hosted-engine-ha > https: > //github.com/oVirt/ovirt-hosted-engine-ha > ----- ???? ----- > ????Vincent Royer > ????dhy336 at sina.com > ????users > ???Re: [ovirt-users] ovirt engine HA > ???2018?04?03? 08?57? > > If your node running self-hosted engine crashes, the hosted engine will be > started up on another node. It just takes a few minutes for this all to > happen, but it works reliably in my experience. > > > > On Mon, Apr 2, 2018 at 5:42 PM, wrote: > > How to solute ovirt engine HA, I have a three node cluster, one of is > deploy engine and node , others are node, if node that deplay engine and > node crash, How to ensure my server is up? > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From mcmr at oticon.com Mon Apr 9 09:59:43 2018 From: mcmr at oticon.com (Michael Mortensen (MCMR)) Date: Mon, 9 Apr 2018 09:59:43 +0000 Subject: [ovirt-users] =?utf-8?b?5Zue5aSN77yaUmU6ICBvdmlydCBlbmdpbmUgSEE=?= In-Reply-To: <20180408064644.77191A801BF@webmail.sinamail.sina.com.cn> References: <20180408064644.77191A801BF@webmail.sinamail.sina.com.cn> Message-ID: <7185b64db97044358ebe80b6ea13fdd9@KBNMXEXC01.Demant.com> Hi, The idea with the HA self-hosted engine is that it is able to migrate to another host, should it be required. Therefore in order to run the engine as ?highly available?, you will need at least two Hosted Engine Hosts in your setup. One, however, is enough to host the engine, but you will lose the ability to migrate the engine to another server, if you need to maintain the Hosted Engine Host. //Mike From: users-bounces at ovirt.org [mailto:users-bounces at ovirt.org] On Behalf Of dhy336 at sina.com Sent: 8. april 2018 08:47 To: Alex K ; FERNANDO FREDIANI Cc: users Subject: [ovirt-users] ???Re: ovirt engine HA Hi, I hava two node, and deploy hosted-engine by #hosted-engine --deploy, I do not understand what should I do? ----- ???? ----- ????Alex K ????FERNANDO FREDIANI ????users ???Re: [ovirt-users] ovirt engine HA ???2018?04?04? 01?40? In case you need HA for the engine you need to deploy it to other hosts also through the GUI. On Tue, Apr 3, 2018 at 4:47 PM, FERNANDO FREDIANI > wrote: Is it enough to deploy the Self-Hosted engine in just one Host of the cluster or is it necessary to repeat the process in each of the nodes that must be able to run it ? Thanks Fernando 2018-04-03 2:01 GMT-03:00 Vincent Royer >: Same thing, the engine in this case is "self-hosted", as in, it runs in a VM hosted on the cluster that it is managing. I am a beginner here, but from my understanding, each node is always checking on the health of the engine VM. If the engine is missing (ie, the host running it has gone down), then another available, healthy host will spawn up the engine and you will regain access. In my experience this has worked very reliably. I have 2 hosts, both are "able" to run the engine VM. If I take one host down, I am not able to load the engine GUI. But if I wait a few minutes, then I regain access, and see that the engine is now running on the remaining healthy host. Vincent Royer 778-825-1057 [Image removed by sender.] SUSTAINABLE MOBILE ENERGY SOLUTIONS On Mon, Apr 2, 2018 at 6:07 PM, > wrote: what different between self-hosted engine and hosted engine? I find a project ovirt-hosted-engine-ha https://github.com/oVirt/ovirt-hosted-engine-ha ----- ???? ----- ????Vincent Royer > ????dhy336 at sina.com ????users > ???Re: [ovirt-users] ovirt engine HA ???2018?04?03? 08?57? If your node running self-hosted engine crashes, the hosted engine will be started up on another node. It just takes a few minutes for this all to happen, but it works reliably in my experience. On Mon, Apr 2, 2018 at 5:42 PM, > wrote: How to solute ovirt engine HA, I have a three node cluster, one of is deploy engine and node , others are node, if node that deplay engine and node crash, How to ensure my server is up? _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 388 bytes Desc: image001.jpg URL: From dhy336 at sina.com Mon Apr 9 11:07:47 2018 From: dhy336 at sina.com (dhy336 at sina.com) Date: Mon, 09 Apr 2018 19:07:47 +0800 Subject: [ovirt-users] =?gbk?b?u9i4tKO6UmU6ICC72Li0o7pSZTogu9i4tKO6UmU6?= =?gbk?q?_ovirt_engine_HA?= Message-ID: <20180409110747.42AA37200CF@webmail.sinamail.sina.com.cn> thanks, my 4.1.9 webadmin UI has not Hosted Engine sub-tab on new host, I do not where is error? ----- ???? ----- ????Simone Tiraboschi ????dhy336 at sina.com ????Alex K , users ???Re: [ovirt-users] ???Re: ???Re: ovirt engine HA ???2018?04?09? 18?32? On Sun, Apr 8, 2018 at 3:53 PM, wrote: sorry. I do not know how to describe my qeustion I want to add a hosted-engine, I use same nfs path with first hosted-engine, but has some error. --== STORAGE CONFIGURATION ==-- Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs3, nfs4)[nfs3]: Please specify the full shared storage connection path to use (example: host:/path): 192.168.122.218:/exports/hosted-engine-test1[ ERROR ] The selected device already contains a storage domain.[ ERROR ] Setup of additional hosts using this software is not allowed anymore. Please use the engine web interface to deploy any additional hosts. Since 4.0 you should add additional hosted-engine hosts directly from the webadmin UI. [ ERROR ] Failed to execute stage 'Environment customization': Setup of additional hosts using this software is not allowed anymore. Please use the engine web interface to deploy any additional hosts.[ INFO ] Stage: Clean up[ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20180408214554.conf'[ INFO ] Stage: Pre-termination[ INFO ] Stage: Termination[ ERROR ] Hosted Engine deployment failed Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20180408214515-4vofq6.log ----- ???? ----- ????Alex K ????dhy336 at sina.com ????FERNANDO FREDIANI , users ???Re: [ovirt-users] ???Re: ovirt engine HA ???2018?04?08? 19?45? Are you a troll? On Sun, Apr 8, 2018, 12:15 wrote: Hi, I hava two node, and deploy hosted-engine by #hosted-engine --deploy, I find two hosted-engine that i deploied is independent, how to make my hosted-engine is HA? ----- ???? ----- ????Alex K ????FERNANDO FREDIANI ????users ???Re: [ovirt-users] ovirt engine HA ???2018?04?04? 01?40? In case you need HA for the engine you need to deploy it to other hosts also through the GUI. On Tue, Apr 3, 2018 at 4:47 PM, FERNANDO FREDIANI wrote: Is it enough to deploy the Self-Hosted engine in just one Host of the cluster or is it necessary to repeat the process in each of the nodes that must be able to run it ? Thanks Fernando 2018-04-03 2:01 GMT-03:00 Vincent Royer : Same thing, the engine in this case is "self-hosted", as in, it runs in a VM hosted on the cluster that it is managing. I am a beginner here, but from my understanding, each node is always checking on the health of the engine VM. If the engine is missing (ie, the host running it has gone down), then another available, healthy host will spawn up the engine and you will regain access. In my experience this has worked very reliably. I have 2 hosts, both are "able" to run the engine VM. If I take one host down, I am not able to load the engine GUI. But if I wait a few minutes, then I regain access, and see that the engine is now running on the remaining healthy host. Vincent Royer778-825-1057 SUSTAINABLE MOBILE ENERGY SOLUTIONS On Mon, Apr 2, 2018 at 6:07 PM, wrote: what different between self-hosted engine and hosted engine? I find a project ovirt-hosted-engine-ha https://github.com/oVirt/ovirt-hosted-engine-ha ----- ???? ----- ????Vincent Royer ????dhy336 at sina.com ????users ???Re: [ovirt-users] ovirt engine HA ???2018?04?03? 08?57? If your node running self-hosted engine crashes, the hosted engine will be started up on another node. It just takes a few minutes for this all to happen, but it works reliably in my experience. On Mon, Apr 2, 2018 at 5:42 PM, wrote: How to solute ovirt engine HA, I have a three node cluster, one of is deploy engine and node , others are node, if node that deplay engine and node crash, How to ensure my server is up? _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users -------------- next part -------------- An HTML attachment was scrubbed... URL: From dhy336 at sina.com Mon Apr 9 11:14:25 2018 From: dhy336 at sina.com (dhy336 at sina.com) Date: Mon, 09 Apr 2018 19:14:25 +0800 Subject: [ovirt-users] =?gbk?b?u9i4tKO6UmU6ICBob3N0ZWQtZW5naW5lIC0tZGVw?= =?gbk?q?loy_ERROR?= Message-ID: <20180409111425.CB441A800C2@webmail.sinamail.sina.com.cn> Hi, that is my log. ----- ???? ----- ????Simone Tiraboschi ????dhy336 at sina.com ????users ???Re: [ovirt-users] hosted-engine --deploy ERROR ???2018?04?09? 18?31? On Mon, Apr 9, 2018 at 11:05 AM, wrote: Hi my node is installed by ovirt-node-ng-installer-ovirt-4.2-2018021412.iso, and I deploy hosted-engine, # hosted-engine --deploy [ INFO ] changed: [localhost][ INFO ] TASK [Clean /etc/hosts for the engine VM][ INFO ] changed: [localhost][ INFO ] TASK [Copy /etc/hosts back to the engine VM][ INFO ] changed: [localhost][ INFO ] TASK [Clean /etc/hosts on the host][ ERROR ] fatal: [localhost]: FAILED! => {"msg": "The task includes an option with an undefined variable. The error was: list object has no element 0\n\nThe error appears to have been in '/usr/share/ovirt-hosted-engine-setup/ansible/create_target_vm.yml': line 265, column 5, but may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe offending line appears to be:\n\n tags: [ 'skip_ansible_lint' ]\n - name: Clean /etc/hosts on the host\n ^ here\n\nexception type: \nexception: list object has no element 0"}[ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook[ INFO ] Stage: Clean up[ INFO ] Cleaning temporary resources[ INFO ] TASK [Gathering Facts][ INFO ] ok: [localhost][ INFO ] TASK [Remove local vm dir][ INFO ] changed: [localhost][ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20180409164100.conf'[ INFO ] Stage: Pre-termination[ INFO ] Stage: Termination[ ERROR ] Hosted Engine deployment failed: please check the logs for the issue, fix accordingly or re-deploy from scratch. Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20180409080454-uts7by.log Hi,according to the error it seams that the playbook wasn't able to fetch the IP address got by the local VM on the default libvirt natted network but it's pretty strange since it shouldn't reach that stage in that case. Can you please attach the whole log file? _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: ovirt-hosted-engine-setup-20180409080454-uts7by.log Type: application/octet-stream Size: 412229 bytes Desc: not available URL: From nicolas at devels.es Mon Apr 9 11:42:45 2018 From: nicolas at devels.es (nicolas at devels.es) Date: Mon, 09 Apr 2018 12:42:45 +0100 Subject: [ovirt-users] =?utf-8?q?Python-SDK4=3A_Knowing_snapshot_status=3F?= Message-ID: <2df042f584570bd004dad61b5728e348@devels.es> Hi, I'm running ovirt-engine-sdk-python 4.2.4 and I'm performing some snapshot-related tasks. I'd like to somehow control the status of the snapshot in order to know when I'll be able to run the next snapshot-related operation. For example, I'd like to create a new snapshot and then delete X oldest snapshots. After creating the snapshot I have to make sure the snapshot operation has concluded to run the deletion. However, I'm unable to find a native way to get the status of a snapshot. In [1]: snap = conn.follow_link(vm.snapshots)[3] # This returns one snapshot In [2]: snap.status In [3]: snap.status_detail So both status-related properties return None. I've managed to find a "poorman's" way by doing this: while True: try: snaps_service.service(snap.id).remove() except Error, e: if e.code == 409: sleep(30) continue else: break Which works but is quite "tricky". Is there a better way to do this? Thanks. From stirabos at redhat.com Mon Apr 9 11:46:47 2018 From: stirabos at redhat.com (Simone Tiraboschi) Date: Mon, 9 Apr 2018 13:46:47 +0200 Subject: [ovirt-users] hosted-engine --deploy ERROR In-Reply-To: <20180409111425.CB441A800C2@webmail.sinamail.sina.com.cn> References: <20180409111425.CB441A800C2@webmail.sinamail.sina.com.cn> Message-ID: On Mon, Apr 9, 2018 at 1:14 PM, wrote: > Hi, that is my log. > Is this real: 2018-04-09 08:33:07,333+0800 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:100 TASK [Get ovirtmgmt route table id] 2018-04-09 16:35:22,495+0800 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:100 changed: [localhost] 2018-04-09 16:35:22,800+0800 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:94 TASK [debug] 2018-04-09 16:35:22,901+0800 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:94 ovirtmgmt_table_id: {'stderr_lines': [], u'changed': True, u'end': u'2018-04-09 16:35:22.316121', u'stdout': u'3232266921', u'cmd': u"ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\ //g | awk '{ print $9 }'", 'failed': False, 'attempts': 14, u'stderr': u'', u'rc': 0, u'delta': u'0:00:00.012578', 'stdout_lines': [u'3232266921'], u'start': u'2018-04-09 16:35:22.303543'} Did it really took 8 hours for that or the system time changed in the middle for external reasons? > ----- ???? ----- > ????Simone Tiraboschi > ????dhy336 at sina.com > ????users > ???Re: [ovirt-users] hosted-engine --deploy ERROR > ???2018?04?09? 18?31? > > > > On Mon, Apr 9, 2018 at 11:05 AM, wrote: > > Hi > > my node is installed by ovirt-node-ng-installer-ovirt-4.2-2018021412.iso, > and I deploy hosted-engine, > # hosted-engine --deploy > > > [ INFO ] changed: [localhost] > [ INFO ] TASK [Clean /etc/hosts for the engine VM] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Copy /etc/hosts back to the engine VM] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Clean /etc/hosts on the host] > [ ERROR ] fatal: [localhost]: FAILED! => {"msg": "The task includes an > option with an undefined variable. The error was: list object has no > element 0\n\nThe error appears to have been in > '/usr/share/ovirt-hosted-engine-setup/ansible/create_target_vm.yml': line > 265, column 5, but may\nbe elsewhere in the file depending on the exact > syntax problem.\n\nThe offending line appears to be:\n\n tags: [ > 'skip_ansible_lint' ]\n - name: Clean /etc/hosts on the host\n ^ > here\n\nexception type: \nexception: > list object has no element 0"} > [ ERROR ] Failed to execute stage 'Closing up': Failed executing > ansible-playbook > [ INFO ] Stage: Clean up > [ INFO ] Cleaning temporary resources > [ INFO ] TASK [Gathering Facts] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Remove local vm dir] > [ INFO ] changed: [localhost] > [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine- > setup/answers/answers-20180409164100.conf' > [ INFO ] Stage: Pre-termination > [ INFO ] Stage: Termination > [ ERROR ] Hosted Engine deployment failed: please check the logs for the > issue, fix accordingly or re-deploy from scratch. > Log file is located at /var/log/ovirt-hosted-engine-s > etup/ovirt-hosted-engine-setup-20180409080454-uts7by.log > > > > Hi, > according to the error it seams that the playbook wasn't able to fetch the > IP address got by the local VM on the default libvirt natted network but > it's pretty strange since it shouldn't reach that stage in that case. > > Can you please attach the whole log file? > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From stirabos at redhat.com Mon Apr 9 11:48:02 2018 From: stirabos at redhat.com (Simone Tiraboschi) Date: Mon, 9 Apr 2018 13:48:02 +0200 Subject: [ovirt-users] =?utf-8?b?5Zue5aSN77yaUmU6IOWbnuWkje+8mlJlOiBvdmly?= =?utf-8?q?t_engine_HA?= In-Reply-To: <20180409110747.42AA37200CF@webmail.sinamail.sina.com.cn> References: <20180409110747.42AA37200CF@webmail.sinamail.sina.com.cn> Message-ID: On Mon, Apr 9, 2018 at 1:07 PM, wrote: > thanks, my 4.1.9 webadmin UI has not Hosted Engine sub-tab on new host, I > do not where is error? > Did you already added another SD? was the engine VM correctly imported? > > ----- ???? ----- > ????Simone Tiraboschi > ????dhy336 at sina.com > ????Alex K , users > ???Re: [ovirt-users] ???Re: ???Re: ovirt engine HA > ???2018?04?09? 18?32? > > > > On Sun, Apr 8, 2018 at 3:53 PM, wrote: > > sorry. I do not know how to describe my qeustion > I want to add a hosted-engine, I use same nfs path with first > hosted-engine, but has some error. > --== STORAGE CONFIGURATION ==-- > > Please specify the storage you would like to use (glusterfs, > iscsi, fc, nfs3, nfs4)[nfs3]: > Please specify the full shared storage connection path to use > (example: host:/path): 192.168.122.218:/exports/hosted-engine-test1 > [ ERROR ] The selected device already contains a storage domain. > [ ERROR ] Setup of additional hosts using this software is not allowed > anymore. Please use the engine web interface to deploy any additional hosts. > > > Since 4.0 you should add additional hosted-engine hosts directly from the > webadmin UI. > > > [ ERROR ] Failed to execute stage 'Environment customization': Setup of > additional hosts using this software is not allowed anymore. Please use the > engine web interface to deploy any additional hosts. > [ INFO ] Stage: Clean up > [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine- > setup/answers/answers-20180408214554.conf' > [ INFO ] Stage: Pre-termination > [ INFO ] Stage: Termination > [ ERROR ] Hosted Engine deployment failed > Log file is located at /var/log/ovirt-hosted-engine-s > etup/ovirt-hosted-engine-setup-20180408214515-4vofq6.log > > > > ----- ???? ----- > ????Alex K > ????dhy336 at sina.com > ????FERNANDO FREDIANI , users > ???Re: [ovirt-users] ???Re: ovirt engine HA > ???2018?04?08? 19?45? > > Are you a troll? > > > On Sun, Apr 8, 2018, 12:15 wrote: > > > Hi, I hava two node, and deploy hosted-engine by #hosted-engine --deploy, > I find two hosted-engine that i deploied is independent, how to make my > hosted-engine is HA? > > ----- ???? ----- > ????Alex K > ????FERNANDO FREDIANI > ????users > ???Re: [ovirt-users] ovirt engine HA > ???2018?04?04? 01?40? > > In case you need HA for the engine you need to deploy it to other hosts > also through the GUI. > > > On Tue, Apr 3, 2018 at 4:47 PM, FERNANDO FREDIANI < > fernando.frediani at upx.com> wrote: > > Is it enough to deploy the Self-Hosted engine in just one Host of the > cluster or is it necessary to repeat the process in each of the nodes that > must be able to run it ? > > Thanks > Fernando > > 2018-04-03 2:01 GMT-03:00 Vincent Royer : > > Same thing, the engine in this case is "self-hosted", as in, it runs in a > VM hosted on the cluster that it is managing. I am a beginner here, but > from my understanding, each node is always checking on the health of the > engine VM. If the engine is missing (ie, the host running it has gone > down), then another available, healthy host will spawn up the engine and > you will regain access. > > In my experience this has worked very reliably. I have 2 hosts, both are > "able" to run the engine VM. If I take one host down, I am not able to > load the engine GUI. But if I wait a few minutes, then I regain access, > and see that the engine is now running on the remaining healthy host. > > *Vincent Royer* > *778-825-1057 <(778)%20825-1057>* > > > > *SUSTAINABLE MOBILE ENERGY SOLUTIONS* > > > > > On Mon, Apr 2, 2018 at 6:07 PM, wrote: > > what different between self-hosted engine and hosted engine? I find a > project ovirt-hosted-engine-ha > https: > //github.com/oVirt/ovirt-hosted-engine-ha > ----- ???? ----- > ????Vincent Royer > ????dhy336 at sina.com > ????users > ???Re: [ovirt-users] ovirt engine HA > ???2018?04?03? 08?57? > > If your node running self-hosted engine crashes, the hosted engine will be > started up on another node. It just takes a few minutes for this all to > happen, but it works reliably in my experience. > > > > On Mon, Apr 2, 2018 at 5:42 PM, wrote: > > How to solute ovirt engine HA, I have a three node cluster, one of is > deploy engine and node , others are node, if node that deplay engine and > node crash, How to ensure my server is up? > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From bzlotnik at redhat.com Mon Apr 9 11:59:31 2018 From: bzlotnik at redhat.com (Benny Zlotnik) Date: Mon, 9 Apr 2018 14:59:31 +0300 Subject: [ovirt-users] Python-SDK4: Knowing snapshot status? In-Reply-To: <2df042f584570bd004dad61b5728e348@devels.es> References: <2df042f584570bd004dad61b5728e348@devels.es> Message-ID: You can do that using something like: snapshot_service = snapshots_service.snapshot_service(snapshot.id) snapshot = snapshot_service.get() if snapshot.snapshot_status == types.SnapshotStatus.OK: ... But counting on the snapshot status is race prone, so in 4.2 a search by correlation id was introduced and you can do something like this (taken from ovirt-system-tests[1]): correlation_id = uuid.uuid4() vm1_snapshots_service.add(dead_snap1_params, query={'correlation_id': correlation_id}) testlib.assert_true_within_long( lambda: test_utils.all_jobs_finished(engine, correlation_id) ) Where all jobs finished does: try: jobs = engine.jobs_service().list( search='correlation_id=%s' % correlation_id ) except: jobs = engine.jobs_service().list() return all(job.status != types.JobStatus.STARTED for job in jobs) [1] - https://github.com/oVirt/ovirt-system-tests/blob/master/basic-suite-master/test-scenarios/004_basic_sanity.py#L360 On Mon, Apr 9, 2018 at 2:42 PM, wrote: > Hi, > > I'm running ovirt-engine-sdk-python 4.2.4 and I'm performing some > snapshot-related tasks. I'd like to somehow control the status of the > snapshot in order to know when I'll be able to run the next > snapshot-related operation. > > For example, I'd like to create a new snapshot and then delete X oldest > snapshots. After creating the snapshot I have to make sure the snapshot > operation has concluded to run the deletion. > > However, I'm unable to find a native way to get the status of a snapshot. > > In [1]: snap = conn.follow_link(vm.snapshots)[3] # This returns one > snapshot > > In [2]: snap.status > > In [3]: snap.status_detail > > So both status-related properties return None. I've managed to find a > "poorman's" way by doing this: > > while True: > try: > snaps_service.service(snap.id).remove() > except Error, e: > if e.code == 409: > sleep(30) > continue > else: > break > > Which works but is quite "tricky". > > Is there a better way to do this? > > Thanks. > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From ahino at redhat.com Mon Apr 9 12:00:18 2018 From: ahino at redhat.com (Ala Hino) Date: Mon, 9 Apr 2018 15:00:18 +0300 Subject: [ovirt-users] Python-SDK4: Knowing snapshot status? In-Reply-To: <2df042f584570bd004dad61b5728e348@devels.es> References: <2df042f584570bd004dad61b5728e348@devels.es> Message-ID: Hi, After issuing the remove operation, you can fetch the VM snapshots and check the status of the snapshot. Here is an example how to fetch VM snapshots: https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/list_vm_ snapshots.py You'd want to wait until the status is OK. On Mon, Apr 9, 2018 at 2:42 PM, wrote: > Hi, > > I'm running ovirt-engine-sdk-python 4.2.4 and I'm performing some > snapshot-related tasks. I'd like to somehow control the status of the > snapshot in order to know when I'll be able to run the next > snapshot-related operation. > > For example, I'd like to create a new snapshot and then delete X oldest > snapshots. After creating the snapshot I have to make sure the snapshot > operation has concluded to run the deletion. > > However, I'm unable to find a native way to get the status of a snapshot. > > In [1]: snap = conn.follow_link(vm.snapshots)[3] # This returns one > snapshot > > In [2]: snap.status > > In [3]: snap.status_detail > > So both status-related properties return None. I've managed to find a > "poorman's" way by doing this: > > while True: > try: > snaps_service.service(snap.id).remove() > except Error, e: > if e.code == 409: > sleep(30) > continue > else: > break > > Which works but is quite "tricky". > > Is there a better way to do this? > > Thanks. > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From awels at redhat.com Mon Apr 9 12:01:44 2018 From: awels at redhat.com (Alexander Wels) Date: Mon, 09 Apr 2018 08:01:44 -0400 Subject: [ovirt-users] How it is oVirt used in your Department? In-Reply-To: References: <1522233082.6801.129.camel@fis.unical.it> Message-ID: <7024229.PNvGaL56Xi@awels> On Sunday, April 8, 2018 10:33:50 AM EDT ~Stack~ wrote: > On 03/28/2018 05:31 AM, Fedele Stabile Nuovo Server wrote: > > My question is mainly addressed at those of you who use oVirt not only > > for creating services on virtual machines. > > What is your experience and what did you made? > > Still consider myself an oVirt newb. Only been using it for a few months > but I'm liking it so far. I don't have the hardware specs in front of me > but I have a 4 node Hypervisor setup with a physical Engine host. All > running on Scientific Linux 7. > > > Is there anyone who virtualized an HPC cluster? > > I'm still not convinced that virtualized HPC is a good idea for those > who need compute performance. Though it is getting better than when I > first heard someone say they were doing it at Supercomputing14! > > > What is for you the advantage on virtualizing a cluster? > > Um. As a 14year HPC admin, I still say none for compute. However, I am > using oVirt to support a ton of my infrastructure services: Frontends, > Log-ins, Scheduler, Database, LDAP, ect. > > I'm still learning how to set up something where my users can click a > button on a webpage and get a VM spun up for a Graphical session on > oVirt. I'm also still debating on the pros/cons for setting up oVirt > VM's for things like JupyterNotebooks/RStudio Server/ect for the "I just > want a web page to develop my code on and will submit to the cluster for > the job run" crowd. > > It is a huge learning process for me. Most of the tools I've been using > have worked great for years, but it is time to update and refresh those > skills. Most of the provisioning tools I've used in the past don't work > so well with oVirt. So now I'm exploring other tools. > > Foreman is and overcomplicated buggy headache, IMO. Every time I or a > coworker has tried to get it going it has been a massive > time-suck-crash-and-burn. Add to it that my current security team has > HUGE issues with Puppet (don't get me started - I like Puppet) and > building Foreman by hand with Salt is just an awful awful awful > experience I wouldn't wish on an enemy...just no. :-) > DigitalRebar was looking SUPER promising, but they recently went to a > model that MUST chat out to the Internet or it breaks itself (a complete > no-go for me). A complete shame. > So I'm back to Cobbler which is simple and works fantastically well, but > doesn't really have any integrations into oVirt (that I'm aware of). I'm > probably going to have to write something with the two API's. > Have you looked at ansible? You can make some playbooks that call the REST api and have it deploy the VMs for you. Or if you feel like writing your own portal you can use the Java or Python SDK to access the REST api. > > Or, having a class with PC or Raspberry is better to use LTSP or PiNet > > or virtualize desktops? > > Can't say. Don't mess with Raspberry Pi's much. > > ~Stack~ From ykaul at redhat.com Mon Apr 9 13:00:14 2018 From: ykaul at redhat.com (Yaniv Kaul) Date: Mon, 9 Apr 2018 16:00:14 +0300 Subject: [ovirt-users] How it is oVirt used in your Department? In-Reply-To: References: <1522233082.6801.129.camel@fis.unical.it> Message-ID: On Sun, Apr 8, 2018 at 5:33 PM, ~Stack~ wrote: > On 03/28/2018 05:31 AM, Fedele Stabile Nuovo Server wrote: > > My question is mainly addressed at those of you who use oVirt not only > > for creating services on virtual machines. > > What is your experience and what did you made? > > Still consider myself an oVirt newb. Only been using it for a few months > but I'm liking it so far. I don't have the hardware specs in front of me > but I have a 4 node Hypervisor setup with a physical Engine host. All > running on Scientific Linux 7. > > > Is there anyone who virtualized an HPC cluster? > > I'm still not convinced that virtualized HPC is a good idea for those > who need compute performance. Though it is getting better than when I > first heard someone say they were doing it at Supercomputing14! > > > What is for you the advantage on virtualizing a cluster? > > Um. As a 14year HPC admin, I still say none for compute. However, I am > using oVirt to support a ton of my infrastructure services: Frontends, > Log-ins, Scheduler, Database, LDAP, ect. > > I'm still learning how to set up something where my users can click a > button on a webpage and get a VM spun up for a Graphical session on > oVirt. I'm also still debating on the pros/cons for setting up oVirt > VM's for things like JupyterNotebooks/RStudio Server/ect for the "I just > want a web page to develop my code on and will submit to the cluster for > the job run" crowd. > Few options to consider: 1. oVirt user portal (with VM pools perhaps?) 2. vagrant with the oVirt provider 3. ManageIQ service portal 4. Ansible playbooks - a simple rule could suffice for most tasks. > It is a huge learning process for me. Most of the tools I've been using > have worked great for years, but it is time to update and refresh those > skills. Most of the provisioning tools I've used in the past don't work > so well with oVirt. So now I'm exploring other tools. > > Foreman is and overcomplicated buggy headache, IMO. Every time I or a > coworker has tried to get it going it has been a massive > time-suck-crash-and-burn. Add to it that my current security team has > HUGE issues with Puppet (don't get me started - I like Puppet) and > building Foreman by hand with Salt is just an awful awful awful > experience I wouldn't wish on an enemy...just no. :-) > DigitalRebar was looking SUPER promising, but they recently went to a > model that MUST chat out to the Internet or it breaks itself (a complete > no-go for me). A complete shame. > So I'm back to Cobbler which is simple and works fantastically well, but > doesn't really have any integrations into oVirt (that I'm aware of). I'm > probably going to have to write something with the two API's. > Provisioning VMs and customizing them using cloud-init may be a viable option. Y. > > > > Or, having a class with PC or Raspberry is better to use LTSP or PiNet > > or virtualize desktops? > Can't say. Don't mess with Raspberry Pi's much. > > ~Stack~ > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dhy336 at sina.com Mon Apr 9 13:01:13 2018 From: dhy336 at sina.com (dhy336 at sina.com) Date: Mon, 09 Apr 2018 21:01:13 +0800 Subject: [ovirt-users] =?gbk?b?u9i4tKO6UmU6IFJlOiAgaG9zdGVkLWVuZ2luZSAt?= =?gbk?q?-deploy_ERROR?= Message-ID: <20180409130113.6D18216600DA@webmail.sinamail.sina.com.cn> Hi , this issue is time zone change. ----- ???? ----- ????Simone Tiraboschi ????dhy336 at sina.com ????users ???Re: Re: [ovirt-users] hosted-engine --deploy ERROR ???2018?04?09? 19?47? On Mon, Apr 9, 2018 at 1:14 PM, wrote: Hi, that is my log. Is this real:2018-04-09 08:33:07,333+0800 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:100 TASK [Get ovirtmgmt route table id]2018-04-09 16:35:22,495+0800 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:100 changed: [localhost]2018-04-09 16:35:22,800+0800 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:94 TASK [debug]2018-04-09 16:35:22,901+0800 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:94 ovirtmgmt_table_id: {'stderr_lines': [], u'changed': True, u'end': u'2018-04-09 16:35:22.316121', u'stdout': u'3232266921', u'cmd': u"ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\ //g | awk '{ print $9 }'", 'failed': False, 'attempts': 14, u'stderr': u'', u'rc': 0, u'delta': u'0:00:00.012578', 'stdout_lines': [u'3232266921'], u'start': u'2018-04-09 16:35:22.303543'} Did it really took 8 hours for that or the system time changed in the middle for external reasons? ----- ???? ----- ????Simone Tiraboschi ????dhy336 at sina.com ????users ???Re: [ovirt-users] hosted-engine --deploy ERROR ???2018?04?09? 18?31? On Mon, Apr 9, 2018 at 11:05 AM, wrote: Hi my node is installed by ovirt-node-ng-installer-ovirt-4.2-2018021412.iso, and I deploy hosted-engine, # hosted-engine --deploy [ INFO ] changed: [localhost][ INFO ] TASK [Clean /etc/hosts for the engine VM][ INFO ] changed: [localhost][ INFO ] TASK [Copy /etc/hosts back to the engine VM][ INFO ] changed: [localhost][ INFO ] TASK [Clean /etc/hosts on the host][ ERROR ] fatal: [localhost]: FAILED! => {"msg": "The task includes an option with an undefined variable. The error was: list object has no element 0\n\nThe error appears to have been in '/usr/share/ovirt-hosted-engine-setup/ansible/create_target_vm.yml': line 265, column 5, but may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe offending line appears to be:\n\n tags: [ 'skip_ansible_lint' ]\n - name: Clean /etc/hosts on the host\n ^ here\n\nexception type: \nexception: list object has no element 0"}[ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook[ INFO ] Stage: Clean up[ INFO ] Cleaning temporary resources[ INFO ] TASK [Gathering Facts][ INFO ] ok: [localhost][ INFO ] TASK [Remove local vm dir][ INFO ] changed: [localhost][ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20180409164100.conf'[ INFO ] Stage: Pre-termination[ INFO ] Stage: Termination[ ERROR ] Hosted Engine deployment failed: please check the logs for the issue, fix accordingly or re-deploy from scratch. Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20180409080454-uts7by.log Hi,according to the error it seams that the playbook wasn't able to fetch the IP address got by the local VM on the default libvirt natted network but it's pretty strange since it shouldn't reach that stage in that case. Can you please attach the whole log file? _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users -------------- next part -------------- An HTML attachment was scrubbed... URL: From P.Staniforth at leedsbeckett.ac.uk Mon Apr 9 12:42:53 2018 From: P.Staniforth at leedsbeckett.ac.uk (Staniforth, Paul) Date: Mon, 9 Apr 2018 12:42:53 +0000 Subject: [ovirt-users] How it is oVirt used in your Department? In-Reply-To: References: <1522233082.6801.129.camel@fis.unical.it>, Message-ID: <1523277773664.12482@leedsbeckett.ac.uk> Have you tried ManageIQ ? It's in the ovirt-image-repository Regards, Paul S. ________________________________________ From: users-bounces at ovirt.org on behalf of ~Stack~ Sent: 08 April 2018 15:33 To: users at ovirt.org Subject: Re: [ovirt-users] How it is oVirt used in your Department? On 03/28/2018 05:31 AM, Fedele Stabile Nuovo Server wrote: > My question is mainly addressed at those of you who use oVirt not only > for creating services on virtual machines. > What is your experience and what did you made? Still consider myself an oVirt newb. Only been using it for a few months but I'm liking it so far. I don't have the hardware specs in front of me but I have a 4 node Hypervisor setup with a physical Engine host. All running on Scientific Linux 7. > Is there anyone who virtualized an HPC cluster? I'm still not convinced that virtualized HPC is a good idea for those who need compute performance. Though it is getting better than when I first heard someone say they were doing it at Supercomputing14! > What is for you the advantage on virtualizing a cluster? Um. As a 14year HPC admin, I still say none for compute. However, I am using oVirt to support a ton of my infrastructure services: Frontends, Log-ins, Scheduler, Database, LDAP, ect. I'm still learning how to set up something where my users can click a button on a webpage and get a VM spun up for a Graphical session on oVirt. I'm also still debating on the pros/cons for setting up oVirt VM's for things like JupyterNotebooks/RStudio Server/ect for the "I just want a web page to develop my code on and will submit to the cluster for the job run" crowd. It is a huge learning process for me. Most of the tools I've been using have worked great for years, but it is time to update and refresh those skills. Most of the provisioning tools I've used in the past don't work so well with oVirt. So now I'm exploring other tools. Foreman is and overcomplicated buggy headache, IMO. Every time I or a coworker has tried to get it going it has been a massive time-suck-crash-and-burn. Add to it that my current security team has HUGE issues with Puppet (don't get me started - I like Puppet) and building Foreman by hand with Salt is just an awful awful awful experience I wouldn't wish on an enemy...just no. :-) DigitalRebar was looking SUPER promising, but they recently went to a model that MUST chat out to the Internet or it breaks itself (a complete no-go for me). A complete shame. So I'm back to Cobbler which is simple and works fantastically well, but doesn't really have any integrations into oVirt (that I'm aware of). I'm probably going to have to write something with the two API's. > Or, having a class with PC or Raspberry is better to use LTSP or PiNet > or virtualize desktops? Can't say. Don't mess with Raspberry Pi's much. ~Stack~ To view the terms under which this email is distributed, please go to:- http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html From dholler at redhat.com Mon Apr 9 15:20:42 2018 From: dholler at redhat.com (Dominik Holler) Date: Mon, 9 Apr 2018 17:20:42 +0200 Subject: [ovirt-users] Can't sync networks In-Reply-To: References: <20180409095453.112d9684@t460p> Message-ID: <20180409172042.34c9ffa7@t460p> On Mon, 9 Apr 2018 07:39:13 -0700 Cole Johnson wrote: > Where can I find this information? The best I can find is if I am in > the "Setup Host" dialog, and mouse over the un-synced network. The > message reads "Host Network's configurations differ from DC". The table below this message in dialog.jpeg shows the values not in sync, which is the default route of the host. > If this > is the error message, what do I need to do to make the configurations > match? Ensure that the gateway of ovirtmgt is the default route on the host. > Isn't this the whole point of what I am trying to do here? I > have attached some screenshots of the different messages that I > encounter. > > On Mon, Apr 9, 2018 at 12:54 AM, Dominik Holler > wrote: > > On Wed, 4 Apr 2018 11:19:33 -0700 > > Cole Johnson wrote: > > > >> Hello, > >> I am trying to set up a 3 host gluster hyperconverged self hosted > >> engine running on oVirt Nodes. ( I think that I have all of the > >> buzzwords here) All of the hardware is the same. I am using the > >> guide from here: > >> https://www.ovirt.org/blog/2018/02/up-and-running-with-ovirt-4-2-and-gluster-storage/ > >> and the documentation here: > >> https://www.ovirt.org/documentation/gluster-hyperconverged/Gluster_Hyperconverged_Guide/ > >> for reference. > >> I have used the setup wizards from the cockpit interface to setup > >> gluster and the hosted engine successfully. I have configured the > >> gluster storage and setup all of the hosts inside the hosted > >> engine. > >> > >> My problem occurs when I try to configure a separate storage > >> network as shown in the blog post. I can get thru the process as > >> outlined, on all three hosts, but the status will not change from > >> "out-of-sync". I can press the "Sync All Networks", and I get a > >> notification which says "Finished SyncAllHostNetworks", but the > >> status of the storage network remains "out-of-sync" . > >> > > > > > > The "Setup Host Networks" dialog presents the information why the > > network is marked as "out-of-sync". > > Does the information presented helps you? > > > >> I don't know if this is related, but I cannot migrate the > >> HostedEngine vm between hosts. > >> > >> I have attached the contents of vdsm.log > >> > >> Any help is appreciated. > > From vincent at epicenergy.ca Mon Apr 9 15:48:09 2018 From: vincent at epicenergy.ca (Vincent Royer) Date: Mon, 9 Apr 2018 08:48:09 -0700 Subject: [ovirt-users] Node health bad after power outage In-Reply-To: References: Message-ID: Does anyone have any clues about these errors? On Sat, Apr 7, 2018 at 9:02 PM, Vincent Royer wrote: > Suffered a long power outage that outlasted our huge UPS, so both my nodes > went down. > > Upon return, the nodes came back up but engine did not start because the > storage server takes longer to boot than the nodes do, so the NFS mounts > didn't reconnect. > > I manually re-entered the mounts using cockpit, rebooted the nodes and the > engine came back up along with all VMs. > > Now in cockpit under Node Status, It says Health: bad, and these messages: > > > Everything seems to be working fine though. > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 19079 bytes Desc: not available URL: From vincent at epicenergy.ca Mon Apr 9 15:48:36 2018 From: vincent at epicenergy.ca (Vincent Royer) Date: Mon, 9 Apr 2018 08:48:36 -0700 Subject: [ovirt-users] Cannot update Node 4.2 to 4.2.2 In-Reply-To: References: Message-ID: No I don't. *Vincent Royer* *778-825-1057* *SUSTAINABLE MOBILE ENERGY SOLUTIONS* On Wed, Apr 4, 2018 at 11:42 PM, Maton, Brett wrote: > shot inthe dark, but have you got EPEL repo enabled by any chance? > > On 4 April 2018 at 20:20, Vincent Royer wrote: > >> Trying to update my nodes to 4.2.2, having a hard time. >> >> I updated the engine, no problems. Migrated VMs off host 1 and put it >> into maintenance. I do a "check upgrade" in the GUI, it finds an update, >> but fails to install. >> >> Drop to CLI and try to do it manually >> >> yum update -y >> >> I get lots of dependency errors for missing packages. A quick google >> shows that I may have the incorrect RPMs installed, and should only have >> the ovirt-node-ng-image and appliance rpms. So I try to install only those. >> >> So I think I have the right rpms now >> >> >> But now when I do a yum update it says there are no packages marked for >> update. >> >> How to fix this? Is there anything I have done wrong that I shouldn't >> do on my other hosts? >> >> >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 8926 bytes Desc: not available URL: From fernando.frediani at upx.com Mon Apr 9 16:21:52 2018 From: fernando.frediani at upx.com (FERNANDO FREDIANI) Date: Mon, 9 Apr 2018 13:21:52 -0300 Subject: [ovirt-users] =?utf-8?b?5Zue5aSN77yaUmU6IOWbnuWkje+8mlJlOiBvdmly?= =?utf-8?q?t_engine_HA?= In-Reply-To: References: <20180408135331.EE3AC1660101@webmail.sinamail.sina.com.cn> Message-ID: Hello Simone The doubt is once one hosted engine is deployed to one of the hosts the process to deploy in the second one is exactly the same or does it have any minor particularity ? You mentioned that can be done via the web GUI. Do you mean by cockpit or by oVirt Engine Web Interface itself ? Thanks Fernando 2018-04-09 7:32 GMT-03:00 Simone Tiraboschi : > > > On Sun, Apr 8, 2018 at 3:53 PM, wrote: > >> sorry. I do not know how to describe my qeustion >> I want to add a hosted-engine, I use same nfs path with first >> hosted-engine, but has some error. >> --== STORAGE CONFIGURATION ==-- >> >> Please specify the storage you would like to use (glusterfs, >> iscsi, fc, nfs3, nfs4)[nfs3]: >> Please specify the full shared storage connection path to use >> (example: host:/path): 192.168.122.218:/exports/hosted-engine-test1 >> [ ERROR ] The selected device already contains a storage domain. >> [ ERROR ] Setup of additional hosts using this software is not allowed >> anymore. Please use the engine web interface to deploy any additional hosts. >> > > Since 4.0 you should add additional hosted-engine hosts directly from the > webadmin UI. > > >> [ ERROR ] Failed to execute stage 'Environment customization': Setup of >> additional hosts using this software is not allowed anymore. Please use the >> engine web interface to deploy any additional hosts. >> [ INFO ] Stage: Clean up >> [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine- >> setup/answers/answers-20180408214554.conf' >> [ INFO ] Stage: Pre-termination >> [ INFO ] Stage: Termination >> [ ERROR ] Hosted Engine deployment failed >> Log file is located at /var/log/ovirt-hosted-engine-s >> etup/ovirt-hosted-engine-setup-20180408214515-4vofq6.log >> >> >> >> ----- ???? ----- >> ????Alex K >> ????dhy336 at sina.com >> ????FERNANDO FREDIANI , users > > >> ???Re: [ovirt-users] ???Re: ovirt engine HA >> ???2018?04?08? 19?45? >> >> Are you a troll? >> >> >> On Sun, Apr 8, 2018, 12:15 wrote: >> >> >> Hi, I hava two node, and deploy hosted-engine by #hosted-engine --deploy, >> I find two hosted-engine that i deploied is independent, how to make >> my hosted-engine is HA? >> >> ----- ???? ----- >> ????Alex K >> ????FERNANDO FREDIANI >> ????users >> ???Re: [ovirt-users] ovirt engine HA >> ???2018?04?04? 01?40? >> >> In case you need HA for the engine you need to deploy it to other hosts >> also through the GUI. >> >> >> On Tue, Apr 3, 2018 at 4:47 PM, FERNANDO FREDIANI < >> fernando.frediani at upx.com> wrote: >> >> Is it enough to deploy the Self-Hosted engine in just one Host of the >> cluster or is it necessary to repeat the process in each of the nodes that >> must be able to run it ? >> >> Thanks >> Fernando >> >> 2018-04-03 2:01 GMT-03:00 Vincent Royer : >> >> Same thing, the engine in this case is "self-hosted", as in, it runs in a >> VM hosted on the cluster that it is managing. I am a beginner here, but >> from my understanding, each node is always checking on the health of the >> engine VM. If the engine is missing (ie, the host running it has gone >> down), then another available, healthy host will spawn up the engine and >> you will regain access. >> >> In my experience this has worked very reliably. I have 2 hosts, both are >> "able" to run the engine VM. If I take one host down, I am not able to >> load the engine GUI. But if I wait a few minutes, then I regain access, >> and see that the engine is now running on the remaining healthy host. >> >> *Vincent Royer* >> *778-825-1057 <(778)%20825-1057>* >> >> >> >> *SUSTAINABLE MOBILE ENERGY SOLUTIONS* >> >> >> >> >> On Mon, Apr 2, 2018 at 6:07 PM, wrote: >> >> what different between self-hosted engine and hosted engine? I find a >> project ovirt-hosted-engine-ha >> https: >> //github.com/oVirt/ovirt-hosted-engine-ha >> ----- ???? ----- >> ????Vincent Royer >> ????dhy336 at sina.com >> ????users >> ???Re: [ovirt-users] ovirt engine HA >> ???2018?04?03? 08?57? >> >> If your node running self-hosted engine crashes, the hosted engine will >> be started up on another node. It just takes a few minutes for this all to >> happen, but it works reliably in my experience. >> >> >> >> On Mon, Apr 2, 2018 at 5:42 PM, wrote: >> >> How to solute ovirt engine HA, I have a three node cluster, one of is >> deploy engine and node , others are node, if node that deplay engine and >> node crash, How to ensure my server is up? >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> >> >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From rightkicktech at gmail.com Mon Apr 9 16:34:33 2018 From: rightkicktech at gmail.com (Alex K) Date: Mon, 09 Apr 2018 16:34:33 +0000 Subject: [ovirt-users] =?utf-8?b?5Zue5aSN77yaUmU6IOWbnuWkje+8mlJlOiBvdmly?= =?utf-8?q?t_engine_HA?= In-Reply-To: References: <20180408135331.EE3AC1660101@webmail.sinamail.sina.com.cn> Message-ID: As mentioned multiple times, at second host you deploy it through ovirt engine GUI. At "new" host meny, at engine tab you select deploy. I would recommend the blog post "up and running with ovirt 4.1". just google it. Also some reading on basic concepts. On Mon, Apr 9, 2018, 19:22 FERNANDO FREDIANI wrote: > Hello Simone > > The doubt is once one hosted engine is deployed to one of the hosts the > process to deploy in the second one is exactly the same or does it have any > minor particularity ? You mentioned that can be done via the web GUI. Do > you mean by cockpit or by oVirt Engine Web Interface itself ? > > Thanks > Fernando > > 2018-04-09 7:32 GMT-03:00 Simone Tiraboschi : > >> >> >> On Sun, Apr 8, 2018 at 3:53 PM, wrote: >> >>> sorry. I do not know how to describe my qeustion >>> I want to add a hosted-engine, I use same nfs path with first >>> hosted-engine, but has some error. >>> --== STORAGE CONFIGURATION ==-- >>> >>> Please specify the storage you would like to use (glusterfs, >>> iscsi, fc, nfs3, nfs4)[nfs3]: >>> Please specify the full shared storage connection path to use >>> (example: host:/path): 192.168.122.218:/exports/hosted-engine-test1 >>> [ ERROR ] The selected device already contains a storage domain. >>> [ ERROR ] Setup of additional hosts using this software is not allowed >>> anymore. Please use the engine web interface to deploy any additional hosts. >>> >> >> Since 4.0 you should add additional hosted-engine hosts directly from the >> webadmin UI. >> >> >>> [ ERROR ] Failed to execute stage 'Environment customization': Setup of >>> additional hosts using this software is not allowed anymore. Please use the >>> engine web interface to deploy any additional hosts. >>> [ INFO ] Stage: Clean up >>> [ INFO ] Generating answer file >>> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20180408214554.conf' >>> [ INFO ] Stage: Pre-termination >>> [ INFO ] Stage: Termination >>> [ ERROR ] Hosted Engine deployment failed >>> Log file is located at >>> /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20180408214515-4vofq6.log >>> >>> >>> >>> ----- ???? ----- >>> ????Alex K >>> ????dhy336 at sina.com >>> ????FERNANDO FREDIANI , users < >>> users at ovirt.org> >>> ???Re: [ovirt-users] ???Re: ovirt engine HA >>> ???2018?04?08? 19?45? >>> >>> Are you a troll? >>> >>> >>> On Sun, Apr 8, 2018, 12:15 wrote: >>> >>> >>> Hi, I hava two node, and deploy hosted-engine by #hosted-engine --deploy, >>> I find two hosted-engine that i deploied is independent, how to make >>> my hosted-engine is HA? >>> >>> ----- ???? ----- >>> ????Alex K >>> ????FERNANDO FREDIANI >>> ????users >>> ???Re: [ovirt-users] ovirt engine HA >>> ???2018?04?04? 01?40? >>> >>> In case you need HA for the engine you need to deploy it to other hosts >>> also through the GUI. >>> >>> >>> On Tue, Apr 3, 2018 at 4:47 PM, FERNANDO FREDIANI < >>> fernando.frediani at upx.com> wrote: >>> >>> Is it enough to deploy the Self-Hosted engine in just one Host of the >>> cluster or is it necessary to repeat the process in each of the nodes that >>> must be able to run it ? >>> >>> Thanks >>> Fernando >>> >>> 2018-04-03 2:01 GMT-03:00 Vincent Royer : >>> >>> Same thing, the engine in this case is "self-hosted", as in, it runs in >>> a VM hosted on the cluster that it is managing. I am a beginner here, but >>> from my understanding, each node is always checking on the health of the >>> engine VM. If the engine is missing (ie, the host running it has gone >>> down), then another available, healthy host will spawn up the engine and >>> you will regain access. >>> >>> In my experience this has worked very reliably. I have 2 hosts, both >>> are "able" to run the engine VM. If I take one host down, I am not able to >>> load the engine GUI. But if I wait a few minutes, then I regain access, >>> and see that the engine is now running on the remaining healthy host. >>> >>> *Vincent Royer* >>> *778-825-1057 <(778)%20825-1057>* >>> >>> >>> >>> *SUSTAINABLE MOBILE ENERGY SOLUTIONS* >>> >>> >>> >>> >>> On Mon, Apr 2, 2018 at 6:07 PM, wrote: >>> >>> what different between self-hosted engine and hosted engine? I find a >>> project ovirt-hosted-engine-ha >>> >>> https://github.com/oVirt/ovirt-hosted-engine-ha >>> ----- ???? ----- >>> ????Vincent Royer >>> ????dhy336 at sina.com >>> ????users >>> ???Re: [ovirt-users] ovirt engine HA >>> ???2018?04?03? 08?57? >>> >>> If your node running self-hosted engine crashes, the hosted engine will >>> be started up on another node. It just takes a few minutes for this all to >>> happen, but it works reliably in my experience. >>> >>> >>> >>> On Mon, Apr 2, 2018 at 5:42 PM, wrote: >>> >>> How to solute ovirt engine HA, I have a three node cluster, one of is >>> deploy engine and node , others are node, if node that deplay engine and >>> node crash, How to ensure my server is up? >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From msivak at redhat.com Mon Apr 9 16:35:13 2018 From: msivak at redhat.com (Martin Sivak) Date: Mon, 9 Apr 2018 18:35:13 +0200 Subject: [ovirt-users] =?utf-8?b?5Zue5aSN77yaUmU6IOWbnuWkje+8mlJlOiBvdmly?= =?utf-8?q?t_engine_HA?= In-Reply-To: References: <20180408135331.EE3AC1660101@webmail.sinamail.sina.com.cn> Message-ID: > You mentioned that can be done via the web GUI. Do you mean by cockpit or by > oVirt Engine Web Interface itself ? Only via the oVirt web admin interface. You first add a standard storage domain, wait for a VM that represents the engine to appear (name: HostedEngine) and then you can add an additional host with hosted engine bits directly from the webadmin UI (HostedEngine side tab of Add new host dialog, select Deploy). Best regards Martin Sivak On Mon, Apr 9, 2018 at 6:21 PM, FERNANDO FREDIANI wrote: > Hello Simone > > The doubt is once one hosted engine is deployed to one of the hosts the > process to deploy in the second one is exactly the same or does it have any > minor particularity ? You mentioned that can be done via the web GUI. Do > you mean by cockpit or by oVirt Engine Web Interface itself ? > > Thanks > Fernando > > 2018-04-09 7:32 GMT-03:00 Simone Tiraboschi : > >> >> >> On Sun, Apr 8, 2018 at 3:53 PM, wrote: >> >>> sorry. I do not know how to describe my qeustion >>> I want to add a hosted-engine, I use same nfs path with first >>> hosted-engine, but has some error. >>> --== STORAGE CONFIGURATION ==-- >>> >>> Please specify the storage you would like to use (glusterfs, >>> iscsi, fc, nfs3, nfs4)[nfs3]: >>> Please specify the full shared storage connection path to use >>> (example: host:/path): 192.168.122.218:/exports/hosted-engine-test1 >>> [ ERROR ] The selected device already contains a storage domain. >>> [ ERROR ] Setup of additional hosts using this software is not allowed >>> anymore. Please use the engine web interface to deploy any additional hosts. >>> >> >> Since 4.0 you should add additional hosted-engine hosts directly from the >> webadmin UI. >> >> >>> [ ERROR ] Failed to execute stage 'Environment customization': Setup of >>> additional hosts using this software is not allowed anymore. Please use the >>> engine web interface to deploy any additional hosts. >>> [ INFO ] Stage: Clean up >>> [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine- >>> setup/answers/answers-20180408214554.conf' >>> [ INFO ] Stage: Pre-termination >>> [ INFO ] Stage: Termination >>> [ ERROR ] Hosted Engine deployment failed >>> Log file is located at /var/log/ovirt-hosted-engine-s >>> etup/ovirt-hosted-engine-setup-20180408214515-4vofq6.log >>> >>> >>> >>> ----- ???? ----- >>> ????Alex K >>> ????dhy336 at sina.com >>> ????FERNANDO FREDIANI , users < >>> users at ovirt.org> >>> ???Re: [ovirt-users] ???Re: ovirt engine HA >>> ???2018?04?08? 19?45? >>> >>> Are you a troll? >>> >>> >>> On Sun, Apr 8, 2018, 12:15 wrote: >>> >>> >>> Hi, I hava two node, and deploy hosted-engine by #hosted-engine --deploy, >>> I find two hosted-engine that i deploied is independent, how to make >>> my hosted-engine is HA? >>> >>> ----- ???? ----- >>> ????Alex K >>> ????FERNANDO FREDIANI >>> ????users >>> ???Re: [ovirt-users] ovirt engine HA >>> ???2018?04?04? 01?40? >>> >>> In case you need HA for the engine you need to deploy it to other hosts >>> also through the GUI. >>> >>> >>> On Tue, Apr 3, 2018 at 4:47 PM, FERNANDO FREDIANI < >>> fernando.frediani at upx.com> wrote: >>> >>> Is it enough to deploy the Self-Hosted engine in just one Host of the >>> cluster or is it necessary to repeat the process in each of the nodes that >>> must be able to run it ? >>> >>> Thanks >>> Fernando >>> >>> 2018-04-03 2:01 GMT-03:00 Vincent Royer : >>> >>> Same thing, the engine in this case is "self-hosted", as in, it runs in >>> a VM hosted on the cluster that it is managing. I am a beginner here, but >>> from my understanding, each node is always checking on the health of the >>> engine VM. If the engine is missing (ie, the host running it has gone >>> down), then another available, healthy host will spawn up the engine and >>> you will regain access. >>> >>> In my experience this has worked very reliably. I have 2 hosts, both >>> are "able" to run the engine VM. If I take one host down, I am not able to >>> load the engine GUI. But if I wait a few minutes, then I regain access, >>> and see that the engine is now running on the remaining healthy host. >>> >>> *Vincent Royer* >>> *778-825-1057 <(778)%20825-1057>* >>> >>> >>> >>> *SUSTAINABLE MOBILE ENERGY SOLUTIONS* >>> >>> >>> >>> >>> On Mon, Apr 2, 2018 at 6:07 PM, wrote: >>> >>> what different between self-hosted engine and hosted engine? I find a >>> project ovirt-hosted-engine-ha >>> https: >>> //github.com/oVirt/ovirt-hosted-engine-ha >>> ----- ???? ----- >>> ????Vincent Royer >>> ????dhy336 at sina.com >>> ????users >>> ???Re: [ovirt-users] ovirt engine HA >>> ???2018?04?03? 08?57? >>> >>> If your node running self-hosted engine crashes, the hosted engine will >>> be started up on another node. It just takes a few minutes for this all to >>> happen, but it works reliably in my experience. >>> >>> >>> >>> On Mon, Apr 2, 2018 at 5:42 PM, wrote: >>> >>> How to solute ovirt engine HA, I have a three node cluster, one of is >>> deploy engine and node , others are node, if node that deplay engine and >>> node crash, How to ensure my server is up? >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From cryptic5000 at hotmail.com Sun Apr 8 14:42:20 2018 From: cryptic5000 at hotmail.com (Cryptic) Date: Sun, 8 Apr 2018 14:42:20 +0000 Subject: [ovirt-users] Fw: Data Operations On Any Host In-Reply-To: References: , Message-ID: Hi Fred, Thanks for the reply and information. When you say all testing flows were done with this option do you mean with this option disabled it is possible I could have issues that would not have been identified during the testing of this version? Thanks. Jeremy ________________________________ From: Fred Rolland Sent: Tuesday, 3 April 2018 3:58 PM To: Cryptic Cc: users at ovirt.org Subject: Re: [ovirt-users] Fw: Data Operations On Any Host Jeremy, There is currently no option to restrict the data operations to specific hosts. You can disable this feature in the DB, disable "DataOperationsByHSM" in the vdc_options table. Note that since it is enabled by default since 4.1, all testing flows were done with this option. Regards, Fred On Sun, Apr 1, 2018 at 11:02 AM, Cryptic > wrote: Hi to all, In relation to the changes made to distribute data operations between all the hosts in a data center rather than burden the SPM. I am very new to oVirt and am having troubles finding information on this and need assistance to prevent this happening on my development oVirt 4.2 system. The issue I have is that I have a cluster which hosts all the storage volumes using gluster and they have 10G NICs. I also have a separate cluster which is virtualisation only and each host only has 3 x 1G aggregated NICs. When I perform disk moves between storage domains it often uses one of the virtualisation hosts which drastically increases the time taken to move the disk. Can I restrict these types of operations to a set of hosts or turn it off altogether so that it just uses the SPM like it used to in the past. Distributing it is a great feature but unfortunately is no good in my current setup. Regards, Jeremy _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users -------------- next part -------------- An HTML attachment was scrubbed... URL: From crimson at unspeakable.org Mon Apr 9 19:03:35 2018 From: crimson at unspeakable.org (Scott Walker) Date: Mon, 9 Apr 2018 15:03:35 -0400 Subject: [ovirt-users] Playing with ISCSI, added a ISCSI target, decided to remove it. Message-ID: Now suddenly I'm getting All my original storage domains are still there and are local ones. I added the ISCSI domain just to see how it worked (and removed it). What can I do to fix this? "Cannot run VM. Running VM can not contain disks which are stored on a backup storage domain." -------------- next part -------------- An HTML attachment was scrubbed... URL: From crimson at unspeakable.org Mon Apr 9 19:07:01 2018 From: crimson at unspeakable.org (Scott Walker) Date: Mon, 9 Apr 2018 15:07:01 -0400 Subject: [ovirt-users] Playing with ISCSI, added a ISCSI target, decided to remove it. In-Reply-To: References: Message-ID: Log file error is: 2018-04-09 15:05:09,576-04 WARN [org.ovirt.engine.core.bll.RunVmCommand] (default task-28) [5f605594-423e-43f6-9e42-e47453518701] Validation of action 'RunVm' failed for user admin at internal-authz. Reasons: VAR__ACTION__RUN,VAR__TYPE__VM,ACTION_TYPE_FAILED_VM_DISKS_ON_BACKUP_STORAGE On 9 April 2018 at 15:03, Scott Walker wrote: > Now suddenly I'm getting > > All my original storage domains are still there and are local ones. I > added the ISCSI domain just to see how it worked (and removed it). > > What can I do to fix this? > > "Cannot run VM. Running VM can not contain disks which are stored on a > backup storage domain." > -------------- next part -------------- An HTML attachment was scrubbed... URL: From bzlotnik at redhat.com Mon Apr 9 19:21:26 2018 From: bzlotnik at redhat.com (Benny Zlotnik) Date: Mon, 09 Apr 2018 19:21:26 +0000 Subject: [ovirt-users] Playing with ISCSI, added a ISCSI target, decided to remove it. In-Reply-To: References: Message-ID: Can you provide the full engine and vdsm logs? On Mon, 9 Apr 2018, 22:08 Scott Walker, wrote: > Log file error is: > > 2018-04-09 15:05:09,576-04 WARN [org.ovirt.engine.core.bll.RunVmCommand] > (default task-28) [5f605594-423e-43f6-9e42-e47453518701] Validation of > action 'RunVm' failed for user admin at internal-authz. Reasons: > VAR__ACTION__RUN,VAR__TYPE__VM,ACTION_TYPE_FAILED_VM_DISKS_ON_BACKUP_STORAGE > > On 9 April 2018 at 15:03, Scott Walker wrote: > >> Now suddenly I'm getting >> >> All my original storage domains are still there and are local ones. I >> added the ISCSI domain just to see how it worked (and removed it). >> >> What can I do to fix this? >> >> "Cannot run VM. Running VM can not contain disks which are stored on a >> backup storage domain." >> > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From crimson at unspeakable.org Mon Apr 9 19:52:22 2018 From: crimson at unspeakable.org (Scott Walker) Date: Mon, 9 Apr 2018 15:52:22 -0400 Subject: [ovirt-users] Playing with ISCSI, added a ISCSI target, decided to remove it. In-Reply-To: References: Message-ID: All relevant log files. On 9 April 2018 at 15:21, Benny Zlotnik wrote: > Can you provide the full engine and vdsm logs? > > On Mon, 9 Apr 2018, 22:08 Scott Walker, wrote: > >> Log file error is: >> >> 2018-04-09 15:05:09,576-04 WARN [org.ovirt.engine.core.bll.RunVmCommand] >> (default task-28) [5f605594-423e-43f6-9e42-e47453518701] Validation of >> action 'RunVm' failed for user admin at internal-authz. Reasons: >> VAR__ACTION__RUN,VAR__TYPE__VM,ACTION_TYPE_FAILED_VM_ >> DISKS_ON_BACKUP_STORAGE >> >> On 9 April 2018 at 15:03, Scott Walker wrote: >> >>> Now suddenly I'm getting >>> >>> All my original storage domains are still there and are local ones. I >>> added the ISCSI domain just to see how it worked (and removed it). >>> >>> What can I do to fix this? >>> >>> "Cannot run VM. Running VM can not contain disks which are stored on a >>> backup storage domain." >>> >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: engine.log.bz2 Type: application/x-bzip Size: 224696 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: mom.log.bz2 Type: application/x-bzip Size: 62612 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: server.log.bz2 Type: application/x-bzip Size: 43624 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: supervdsm.log.bz2 Type: application/x-bzip Size: 135115 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: vdsm.log.bz2 Type: application/x-bzip Size: 354140 bytes Desc: not available URL: From nicolas.vaye at province-sud.nc Tue Apr 10 05:35:40 2018 From: nicolas.vaye at province-sud.nc (Nicolas Vaye) Date: Tue, 10 Apr 2018 05:35:40 +0000 Subject: [ovirt-users] fiber channel for hosted-engine deployment and can we import all type of vmware's VM Message-ID: <1523338535.2653.6.camel@province-sud.nc> Hello, is it possible to deploy the engine (in hosted mode) on a fiber channel storage with OVIRT or RHV ? It seem to me with RHV in 4.1 we can, but not in 4.2 beta, confirm ? And i don't know with OVIRT. The second question is for vmware import : I have imported one vm from vmware 5.5, and it works, but not for all my vms. It seem that it works with vm in vmtype 7, in vmtype 10 it doesn't work. Is there a limitation to import VM from Vmware in OVIRT or RHV ? Thanks. Nicolas VAYE From sizzlinsaguaro at gmail.com Mon Apr 9 14:39:13 2018 From: sizzlinsaguaro at gmail.com (Cole Johnson) Date: Mon, 9 Apr 2018 07:39:13 -0700 Subject: [ovirt-users] Can't sync networks In-Reply-To: <20180409095453.112d9684@t460p> References: <20180409095453.112d9684@t460p> Message-ID: Where can I find this information? The best I can find is if I am in the "Setup Host" dialog, and mouse over the un-synced network. The message reads "Host Network's configurations differ from DC". If this is the error message, what do I need to do to make the configurations match? Isn't this the whole point of what I am trying to do here? I have attached some screenshots of the different messages that I encounter. On Mon, Apr 9, 2018 at 12:54 AM, Dominik Holler wrote: > On Wed, 4 Apr 2018 11:19:33 -0700 > Cole Johnson wrote: > >> Hello, >> I am trying to set up a 3 host gluster hyperconverged self hosted >> engine running on oVirt Nodes. ( I think that I have all of the >> buzzwords here) All of the hardware is the same. I am using the guide >> from here: >> https://www.ovirt.org/blog/2018/02/up-and-running-with-ovirt-4-2-and-gluster-storage/ >> and the documentation here: >> https://www.ovirt.org/documentation/gluster-hyperconverged/Gluster_Hyperconverged_Guide/ >> for reference. >> I have used the setup wizards from the cockpit interface to setup >> gluster and the hosted engine successfully. I have configured the >> gluster storage and setup all of the hosts inside the hosted engine. >> >> My problem occurs when I try to configure a separate storage network >> as shown in the blog post. I can get thru the process as outlined, on >> all three hosts, but the status will not change from "out-of-sync". I >> can press the "Sync All Networks", and I get a notification which says >> "Finished SyncAllHostNetworks", but the status of the storage network >> remains "out-of-sync" . >> > > > The "Setup Host Networks" dialog presents the information why the > network is marked as "out-of-sync". > Does the information presented helps you? > >> I don't know if this is related, but I cannot migrate the HostedEngine >> vm between hosts. >> >> I have attached the contents of vdsm.log >> >> Any help is appreciated. > -------------- next part -------------- A non-text attachment was scrubbed... Name: config.jpg Type: image/jpeg Size: 19234 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: dialog.jpg Type: image/jpeg Size: 79783 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: interface.jpg Type: image/jpeg Size: 37658 bytes Desc: not available URL: From lorenzetto.luca at gmail.com Tue Apr 10 07:22:00 2018 From: lorenzetto.luca at gmail.com (Luca 'remix_tj' Lorenzetto) Date: Tue, 10 Apr 2018 09:22:00 +0200 Subject: [ovirt-users] fiber channel for hosted-engine deployment and can we import all type of vmware's VM In-Reply-To: <1523338535.2653.6.camel@province-sud.nc> References: <1523338535.2653.6.camel@province-sud.nc> Message-ID: On Tue, Apr 10, 2018 at 7:35 AM, Nicolas Vaye wrote: > Hello, > > > is it possible to deploy the engine (in hosted mode) on a fiber channel storage with OVIRT or RHV ? > > It seem to me with RHV in 4.1 we can, but not in 4.2 beta, confirm ? > And i don't know with OVIRT. > Yes sure. There's no difference between RHV and oVirt, is the same product. I've deployed in hosted-engine on FC with all releases without issues. > > The second question is for vmware import : > > I have imported one vm from vmware 5.5, and it works, but not for all my vms. > It seem that it works with vm in vmtype 7, in vmtype 10 it doesn't work. > > Is there a limitation to import VM from Vmware in OVIRT or RHV ? > As far as i know no. I've several vms with vmtype 10 (RHEL 7 vms) and i've been importing without problems from ESXi 6.0 Luca -- "E' assurdo impiegare gli uomini di intelligenza eccellente per fare calcoli che potrebbero essere affidati a chiunque se si usassero delle macchine" Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716) "Internet ? la pi? grande biblioteca del mondo. Ma il problema ? che i libri sono tutti sparsi sul pavimento" John Allen Paulos, Matematico (1945-vivente) Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , From stefan.wendler at tngtech.com Tue Apr 10 07:30:31 2018 From: stefan.wendler at tngtech.com (Stefan Wendler) Date: Tue, 10 Apr 2018 09:30:31 +0200 Subject: [ovirt-users] External Provider https (unknown error) In-Reply-To: <20180406194352.60af05b9@t460p> References: <23bb44c6-6014-2d24-5b2f-22b7f6f41ed9@tngtech.com> <20180406194352.60af05b9@t460p> Message-ID: <65062c61-43c6-b5c9-02d5-dae13ca523e1@tngtech.com> On 04/06/2018 19:43, Dominik Holler wrote: > On Wed, 4 Apr 2018 13:29:56 +0200 > Stefan Wendler wrote: > >> Hi, >> >> I am currently trying to attach Glance (OpenStack Image) and Cinder >> (OpenStack Volume) as external provider and am facing a problem when >> trying to use https in the Provider-URL on an ovirt 3.6 and 4.1 >> cluster. >> >> The Provider-URL I am using is in the form: >> https://:9292 (or port 8776 for Cinder - is either a fqdn >> or an IP-Address) >> >> Whenever I press the "Test" button in the "Add Provider" dialog I get >> the message "Test Failed (unknown error)." There is no entry in any >> logfile whatsoever (at least not in any logs that are associated with >> ovirt). I would expect an ssl cert dialog here. I can telnet to the >> destination ports from the engine and the nodes so Clance and Cinder >> are reachable >> >> I have also read that this might happen, if there is a corrupted >> /var/lib/ovirt-engine/external_truststore >> But this file is not even existing and when i create it by hand, it is >> not touched. >> >> How can I get this to work or even get an error message that gives me >> a hint where to look? >> > > If there is something logged, it would be in engine.log. > Can you please re-check if there is something related logged in > engine.log? > > Are you using authentication? > > Do you use HTTPS for Glance/Cinder and authentication? Thanks for the reply. The log file states nothing whatsoever. Theresponse is so insanely fast that it feels as if something fails an early validation. It does not matter, if I use authentication or not. If I use http instead of https it logs the following error: ---- engine.log ---- 2018-04-09 15:39:39,298+02 INFO [org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand] (default task-77) [b91f14f3-d8f6-43a1-a377-2d1523ee58dd] Running command: TestProviderConnectivityCommand internal: false. Entities affected : ID: aaa00000-0000-0000-0000-123456789aaa Type: SystemAction group CREATE_STORAGE_POOL with role type ADMIN 2018-04-09 15:39:39,403+02 ERROR [org.ovirt.engine.core.bll.provider.storage.AbstractOpenStackStorageProviderProxy] (default task-77) [b91f14f3-d8f6-43a1-a377-2d1523ee58dd] Not Found (OpenStack response error code: 404) 2018-04-09 15:39:39,404+02 ERROR [org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand] (default task-77) [b91f14f3-d8f6-43a1-a377-2d1523ee58dd] Command 'org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand' failed: EngineException: (Failed with error PROVIDER_FAILURE and code 5050) ---- EOM ---- So http goes thru and responds with the expected error (connection via http is reset immediately). But for https it does not even get this far. I can access the Provider-URL and Auth-URL via browser and from the engine's command line and get a valid json response. It also does not matter, if I use authentication or not. Error end response rate stays the same. I checked with our hosting provider that the urls are correct. I have attached a screenshot of the "Edit Provider"-Window with the message. It's the only place something is logged. Setting log level to debug shows nothing either. -------------- next part -------------- A non-text attachment was scrubbed... Name: ovirt-glance.jpg Type: image/jpeg Size: 43467 bytes Desc: not available URL: From stirabos at redhat.com Tue Apr 10 07:54:36 2018 From: stirabos at redhat.com (Simone Tiraboschi) Date: Tue, 10 Apr 2018 09:54:36 +0200 Subject: [ovirt-users] hosted-engine --deploy ERROR In-Reply-To: <20180409130113.6D18216600DA@webmail.sinamail.sina.com.cn> References: <20180409130113.6D18216600DA@webmail.sinamail.sina.com.cn> Message-ID: On Mon, Apr 9, 2018 at 3:01 PM, wrote: > Hi , this issue is time zone change. > I fear that the time zone change in the middle of the deployment could make the DHCP lease invalid. Did it work if you simply set the right time zone before starting the deployment? > > > ----- ???? ----- > ????Simone Tiraboschi > ????dhy336 at sina.com > ????users > ???Re: Re: [ovirt-users] hosted-engine --deploy ERROR > ???2018?04?09? 19?47? > > > > On Mon, Apr 9, 2018 at 1:14 PM, wrote: > > Hi, that is my log. > > > > Is this real: > 2018-04-09 08:33:07,333+0800 INFO otopi.ovirt_hosted_engine_setup.ansible_utils > ansible_utils._process_output:100 TASK [Get ovirtmgmt route table id] > 2018-04-09 16:35:22,495+0800 INFO otopi.ovirt_hosted_engine_setup.ansible_utils > ansible_utils._process_output:100 changed: [localhost] > 2018-04-09 16:35:22,800+0800 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils > ansible_utils._process_output:94 TASK [debug] > 2018-04-09 16:35:22,901+0800 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils > ansible_utils._process_output:94 ovirtmgmt_table_id: {'stderr_lines': [], > u'changed': True, u'end': u'2018-04-09 16:35:22.316121', u'stdout': > u'3232266921', u'cmd': u"ip rule list | grep ovirtmgmt | sed > s/\\\\[.*\\\\]\\ //g | awk '{ print $9 }'", 'failed': False, 'attempts': > 14, u'stderr': u'', u'rc': 0, u'delta': u'0:00:00.012578', 'stdout_lines': > [u'3232266921'], u'start': u'2018-04-09 16:35:22.303543'} > > Did it really took 8 hours for that or the system time changed in the > middle for external reasons? > > > ----- ???? ----- > ????Simone Tiraboschi > ????dhy336 at sina.com > ????users > ???Re: [ovirt-users] hosted-engine --deploy ERROR > ???2018?04?09? 18?31? > > > > On Mon, Apr 9, 2018 at 11:05 AM, wrote: > > Hi > > my node is installed by ovirt-node-ng-installer-ovirt-4.2-2018021412.iso, > and I deploy hosted-engine, > # hosted-engine --deploy > > > [ INFO ] changed: [localhost] > [ INFO ] TASK [Clean /etc/hosts for the engine VM] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Copy /etc/hosts back to the engine VM] > [ INFO ] changed: [localhost] > [ INFO ] TASK [Clean /etc/hosts on the host] > [ ERROR ] fatal: [localhost]: FAILED! => {"msg": "The task includes an > option with an undefined variable. The error was: list object has no > element 0\n\nThe error appears to have been in > '/usr/share/ovirt-hosted-engine-setup/ansible/create_target_vm.yml': line > 265, column 5, but may\nbe elsewhere in the file depending on the exact > syntax problem.\n\nThe offending line appears to be:\n\n tags: [ > 'skip_ansible_lint' ]\n - name: Clean /etc/hosts on the host\n ^ > here\n\nexception type: \nexception: > list object has no element 0"} > [ ERROR ] Failed to execute stage 'Closing up': Failed executing > ansible-playbook > [ INFO ] Stage: Clean up > [ INFO ] Cleaning temporary resources > [ INFO ] TASK [Gathering Facts] > [ INFO ] ok: [localhost] > [ INFO ] TASK [Remove local vm dir] > [ INFO ] changed: [localhost] > [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine- > setup/answers/answers-20180409164100.conf' > [ INFO ] Stage: Pre-termination > [ INFO ] Stage: Termination > [ ERROR ] Hosted Engine deployment failed: please check the logs for the > issue, fix accordingly or re-deploy from scratch. > Log file is located at /var/log/ovirt-hosted-engine-s > etup/ovirt-hosted-engine-setup-20180409080454-uts7by.log > > > > Hi, > according to the error it seams that the playbook wasn't able to fetch the > IP address got by the local VM on the default libvirt natted network but > it's pretty strange since it shouldn't reach that stage in that case. > > Can you please attach the whole log file? > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dhy336 at sina.com Tue Apr 10 07:59:23 2018 From: dhy336 at sina.com (dhy336 at sina.com) Date: Tue, 10 Apr 2018 15:59:23 +0800 Subject: [ovirt-users] =?gbk?b?u9i4tKO6UmU6IFJlOiBSZTogIGhvc3RlZC1lbmdp?= =?gbk?q?ne_--deploy_ERROR?= Message-ID: <20180410075923.D2AF47200CD@webmail.sinamail.sina.com.cn> Hi Simone thank you, I adjust time zone and time by ntpdate, # hosted-engine --deploy is work? ----- ???? ----- ????Simone Tiraboschi ????dhy336 at sina.com ????users ???Re: Re: Re: [ovirt-users] hosted-engine --deploy ERROR ???2018?04?10? 15?55? On Mon, Apr 9, 2018 at 3:01 PM, wrote: Hi , this issue is time zone change. I fear that the time zone change in the middle of the deployment could make the DHCP lease invalid.Did it work if you simply set the right time zone before starting the deployment? ----- ???? ----- ????Simone Tiraboschi ????dhy336 at sina.com ????users ???Re: Re: [ovirt-users] hosted-engine --deploy ERROR ???2018?04?09? 19?47? On Mon, Apr 9, 2018 at 1:14 PM, wrote: Hi, that is my log. Is this real:2018-04-09 08:33:07,333+0800 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:100 TASK [Get ovirtmgmt route table id]2018-04-09 16:35:22,495+0800 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:100 changed: [localhost]2018-04-09 16:35:22,800+0800 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:94 TASK [debug]2018-04-09 16:35:22,901+0800 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:94 ovirtmgmt_table_id: {'stderr_lines': [], u'changed': True, u'end': u'2018-04-09 16:35:22.316121', u'stdout': u'3232266921', u'cmd': u"ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\ //g | awk '{ print $9 }'", 'failed': False, 'attempts': 14, u'stderr': u'', u'rc': 0, u'delta': u'0:00:00.012578', 'stdout_lines': [u'3232266921'], u'start': u'2018-04-09 16:35:22.303543'} Did it really took 8 hours for that or the system time changed in the middle for external reasons? ----- ???? ----- ????Simone Tiraboschi ????dhy336 at sina.com ????users ???Re: [ovirt-users] hosted-engine --deploy ERROR ???2018?04?09? 18?31? On Mon, Apr 9, 2018 at 11:05 AM, wrote: Hi my node is installed by ovirt-node-ng-installer-ovirt-4.2-2018021412.iso, and I deploy hosted-engine, # hosted-engine --deploy [ INFO ] changed: [localhost][ INFO ] TASK [Clean /etc/hosts for the engine VM][ INFO ] changed: [localhost][ INFO ] TASK [Copy /etc/hosts back to the engine VM][ INFO ] changed: [localhost][ INFO ] TASK [Clean /etc/hosts on the host][ ERROR ] fatal: [localhost]: FAILED! => {"msg": "The task includes an option with an undefined variable. The error was: list object has no element 0\n\nThe error appears to have been in '/usr/share/ovirt-hosted-engine-setup/ansible/create_target_vm.yml': line 265, column 5, but may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe offending line appears to be:\n\n tags: [ 'skip_ansible_lint' ]\n - name: Clean /etc/hosts on the host\n ^ here\n\nexception type: \nexception: list object has no element 0"}[ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook[ INFO ] Stage: Clean up[ INFO ] Cleaning temporary resources[ INFO ] TASK [Gathering Facts][ INFO ] ok: [localhost][ INFO ] TASK [Remove local vm dir][ INFO ] changed: [localhost][ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20180409164100.conf'[ INFO ] Stage: Pre-termination[ INFO ] Stage: Termination[ ERROR ] Hosted Engine deployment failed: please check the logs for the issue, fix accordingly or re-deploy from scratch. Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20180409080454-uts7by.log Hi,according to the error it seams that the playbook wasn't able to fetch the IP address got by the local VM on the default libvirt natted network but it's pretty strange since it shouldn't reach that stage in that case. Can you please attach the whole log file? _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users -------------- next part -------------- An HTML attachment was scrubbed... URL: From bzlotnik at redhat.com Tue Apr 10 08:45:22 2018 From: bzlotnik at redhat.com (Benny Zlotnik) Date: Tue, 10 Apr 2018 11:45:22 +0300 Subject: [ovirt-users] Playing with ISCSI, added a ISCSI target, decided to remove it. In-Reply-To: References: Message-ID: Is the storage domain marked as backup? If it is, you cannot use its disks in an active VM. You can remove the flag and try again On Mon, Apr 9, 2018 at 10:52 PM, Scott Walker wrote: > All relevant log files. > > On 9 April 2018 at 15:21, Benny Zlotnik wrote: > >> Can you provide the full engine and vdsm logs? >> >> On Mon, 9 Apr 2018, 22:08 Scott Walker, wrote: >> >>> Log file error is: >>> >>> 2018-04-09 15:05:09,576-04 WARN [org.ovirt.engine.core.bll.RunVmCommand] >>> (default task-28) [5f605594-423e-43f6-9e42-e47453518701] Validation of >>> action 'RunVm' failed for user admin at internal-authz. Reasons: >>> VAR__ACTION__RUN,VAR__TYPE__VM,ACTION_TYPE_FAILED_VM_DISKS_ >>> ON_BACKUP_STORAGE >>> >>> On 9 April 2018 at 15:03, Scott Walker wrote: >>> >>>> Now suddenly I'm getting >>>> >>>> All my original storage domains are still there and are local ones. I >>>> added the ISCSI domain just to see how it worked (and removed it). >>>> >>>> What can I do to fix this? >>>> >>>> "Cannot run VM. Running VM can not contain disks which are stored on a >>>> backup storage domain." >>>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From frolland at redhat.com Tue Apr 10 09:23:33 2018 From: frolland at redhat.com (Fred Rolland) Date: Tue, 10 Apr 2018 12:23:33 +0300 Subject: [ovirt-users] External Provider https (unknown error) In-Reply-To: <65062c61-43c6-b5c9-02d5-dae13ca523e1@tngtech.com> References: <23bb44c6-6014-2d24-5b2f-22b7f6f41ed9@tngtech.com> <20180406194352.60af05b9@t460p> <65062c61-43c6-b5c9-02d5-dae13ca523e1@tngtech.com> Message-ID: Hi, Can you please open a bug? >From the code, it seems that the OpenStack Storage providers are not implementing a needed method [1], that is present in other providers [2]. Thanks, Fred [1] https://github.com/oVirt/ovirt-engine/blob/master/backend/manager/modules/bll/src/main/java/org/ovirt/engine/core/bll/provider/ProviderProxy.java#L20 [2] https://github.com/oVirt/ovirt-engine/blob/master/backend/manager/modules/bll/src/main/java/org/ovirt/engine/core/bll/provider/BaseProviderProxy.java#L60 On Tue, Apr 10, 2018 at 10:30 AM, Stefan Wendler wrote: > On 04/06/2018 19:43, Dominik Holler wrote: > > On Wed, 4 Apr 2018 13:29:56 +0200 > > Stefan Wendler wrote: > > > >> Hi, > >> > >> I am currently trying to attach Glance (OpenStack Image) and Cinder > >> (OpenStack Volume) as external provider and am facing a problem when > >> trying to use https in the Provider-URL on an ovirt 3.6 and 4.1 > >> cluster. > >> > >> The Provider-URL I am using is in the form: > >> https://:9292 (or port 8776 for Cinder - is either a fqdn > >> or an IP-Address) > >> > >> Whenever I press the "Test" button in the "Add Provider" dialog I get > >> the message "Test Failed (unknown error)." There is no entry in any > >> logfile whatsoever (at least not in any logs that are associated with > >> ovirt). I would expect an ssl cert dialog here. I can telnet to the > >> destination ports from the engine and the nodes so Clance and Cinder > >> are reachable > >> > >> I have also read that this might happen, if there is a corrupted > >> /var/lib/ovirt-engine/external_truststore > >> But this file is not even existing and when i create it by hand, it is > >> not touched. > >> > >> How can I get this to work or even get an error message that gives me > >> a hint where to look? > >> > > > > If there is something logged, it would be in engine.log. > > Can you please re-check if there is something related logged in > > engine.log? > > > > Are you using authentication? > > > > Do you use HTTPS for Glance/Cinder and authentication? > > Thanks for the reply. The log file states nothing whatsoever. > Theresponse is so insanely fast that it feels as if something fails an > early validation. It does not matter, if I use authentication or not. If > I use http instead of https it logs the following error: > > ---- engine.log ---- > 2018-04-09 15:39:39,298+02 INFO > [org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand] > (default task-77) [b91f14f3-d8f6-43a1-a377-2d1523ee58dd] Running > command: TestProviderConnectivityCommand internal: false. Entities > affected : ID: aaa00000-0000-0000-0000-123456789aaa Type: SystemAction > group CREATE_STORAGE_POOL with role type ADMIN > 2018-04-09 15:39:39,403+02 ERROR > [org.ovirt.engine.core.bll.provider.storage.AbstractOpenStackStorageProvid > erProxy] > (default task-77) [b91f14f3-d8f6-43a1-a377-2d1523ee58dd] Not Found > (OpenStack response error code: 404) > 2018-04-09 15:39:39,404+02 ERROR > [org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand] > (default task-77) [b91f14f3-d8f6-43a1-a377-2d1523ee58dd] Command > 'org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand' > failed: EngineException: (Failed with error PROVIDER_FAILURE and code 5050) > ---- EOM ---- > > So http goes thru and responds with the expected error (connection via > http is reset immediately). But for https it does not even get this far. > I can access the Provider-URL and Auth-URL via browser and from the > engine's command line and get a valid json response. > > It also does not matter, if I use authentication or not. Error end > response rate stays the same. I checked with our hosting provider that > the urls are correct. > > I have attached a screenshot of the "Edit Provider"-Window with the > message. It's the only place something is logged. Setting log level to > debug shows nothing either. > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From vasily.lamykin at MegaFon.ru Tue Apr 10 11:48:50 2018 From: vasily.lamykin at MegaFon.ru (Vasily Lamykin) Date: Tue, 10 Apr 2018 11:48:50 +0000 Subject: [ovirt-users] OVN between two different datacenters with different networks Message-ID: Hi, all I try to configure ovn in engine, what I do by step: 1.Created network test1 with external ovn provider on engine1 2.Created subnet for this network 3.Connect engine2 to engine1 ovn provider(through ?add provider?) 4.Successfully imported network test1 on engine2 5.I see subnet?s on all engines 6.Created 2 VM with nic in network test1 on both engines 7.Assigned ips from one subnet(192.168.10.0/24) to all VMs Expected results: VM from engine1 can ping VM from engine2 in same subnet in ovn network test1 Now, I don?t have ping ability between two VMs ovn-nbctl show switch 54beaa3c-de8f-435f-b132-8542ddeb4b4b (test-ovn-phys) port b580d44d-e616-42dd-9e17-63983d0f91e5 addresses: ["00:1a:4a:16:01:01 dynamic"] port cfd5f32c-00a7-419e-8bbe-27518a4c74dc addresses: ["00:1a:4a:16:01:00 dynamic"] node from engine1 with testVM vnet0: mtu 1500 qdisc pfifo_fast master ovs-system state UNKNOWN qlen 1000 link/ether fe:1a:4a:16:01:01 brd ff:ff:ff:ff:ff:ff inet6 fe80::fc1a:4aff:fe16:101/64 scope link valid_lft forever preferred_lft forever node from engine2 with testVM vnet0: mtu 1500 qdisc pfifo_fast master ovs-system state UNKNOWN qlen 1000 link/ether fe:1a:4a:16:01:00 brd ff:ff:ff:ff:ff:ff inet6 fe80::fc1a:4aff:fe16:100/64 scope link valid_lft forever preferred_lft forever How can I do ovn connection? What I did wrong? ________________________________ ?????????? ? ???? ????????? ????????????? ????????????? ??? ?????????? ???, ??????? ??? ??????????. ? ????????? ????? ??????????? ???????????????? ??????????, ??????? ?? ????? ???? ???????? ??? ???????????? ???-????, ????? ?????????. ???? ?? ?? ??????? ????? ?????????, ?? ?????????????, ?????????????, ??????????? ??? ??????????????? ?????????? ????????? ??? ??? ????? ????????? ? ?????????. ???? ?? ???????? ??? ????????? ????????, ??????????, ??????????????? ???????? ??????????? ?? ???? ? ??????? ?? ???? ?????????? ???? ????????? ? ????? ????????? ??? ????? ? ??????????. The information contained in this communication is intended solely for the use of the individual or entity to whom it is addressed and others authorized to receive it. It may contain confidential or legally privileged information. The contents may not be disclosed or used by anyone other than the addressee. If you are not the intended recipient(s), any use, disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it is prohibited and may be unlawful. If you have received this communication in error please notify us immediately by responding to this email and then delete the e-mail and all attachments and any copies thereof. ----- -------------- next part -------------- An HTML attachment was scrubbed... URL: From crimson at unspeakable.org Tue Apr 10 13:37:19 2018 From: crimson at unspeakable.org (Scott Walker) Date: Tue, 10 Apr 2018 09:37:19 -0400 Subject: [ovirt-users] Playing with ISCSI, added a ISCSI target, decided to remove it. In-Reply-To: References: Message-ID: Crap, I think that's it. I think I selected it by accident. Dammit. On 10 April 2018 at 04:45, Benny Zlotnik wrote: > Is the storage domain marked as backup? > If it is, you cannot use its disks in an active VM. You can remove the > flag and try again > > On Mon, Apr 9, 2018 at 10:52 PM, Scott Walker > wrote: > >> All relevant log files. >> >> On 9 April 2018 at 15:21, Benny Zlotnik wrote: >> >>> Can you provide the full engine and vdsm logs? >>> >>> On Mon, 9 Apr 2018, 22:08 Scott Walker, wrote: >>> >>>> Log file error is: >>>> >>>> 2018-04-09 15:05:09,576-04 WARN [org.ovirt.engine.core.bll.RunVmCommand] >>>> (default task-28) [5f605594-423e-43f6-9e42-e47453518701] Validation of >>>> action 'RunVm' failed for user admin at internal-authz. Reasons: >>>> VAR__ACTION__RUN,VAR__TYPE__VM,ACTION_TYPE_FAILED_VM_DISKS_O >>>> N_BACKUP_STORAGE >>>> >>>> On 9 April 2018 at 15:03, Scott Walker wrote: >>>> >>>>> Now suddenly I'm getting >>>>> >>>>> All my original storage domains are still there and are local ones. I >>>>> added the ISCSI domain just to see how it worked (and removed it). >>>>> >>>>> What can I do to fix this? >>>>> >>>>> "Cannot run VM. Running VM can not contain disks which are stored on a >>>>> backup storage domain." >>>>> >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users at ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From crimson at unspeakable.org Tue Apr 10 14:47:35 2018 From: crimson at unspeakable.org (Scott Walker) Date: Tue, 10 Apr 2018 10:47:35 -0400 Subject: [ovirt-users] Playing with ISCSI, added a ISCSI target, decided to remove it. In-Reply-To: References: Message-ID: Thank you, I feel like a complete dumbass now. On 10 April 2018 at 04:45, Benny Zlotnik wrote: > Is the storage domain marked as backup? > If it is, you cannot use its disks in an active VM. You can remove the > flag and try again > > On Mon, Apr 9, 2018 at 10:52 PM, Scott Walker > wrote: > >> All relevant log files. >> >> On 9 April 2018 at 15:21, Benny Zlotnik wrote: >> >>> Can you provide the full engine and vdsm logs? >>> >>> On Mon, 9 Apr 2018, 22:08 Scott Walker, wrote: >>> >>>> Log file error is: >>>> >>>> 2018-04-09 15:05:09,576-04 WARN [org.ovirt.engine.core.bll.RunVmCommand] >>>> (default task-28) [5f605594-423e-43f6-9e42-e47453518701] Validation of >>>> action 'RunVm' failed for user admin at internal-authz. Reasons: >>>> VAR__ACTION__RUN,VAR__TYPE__VM,ACTION_TYPE_FAILED_VM_DISKS_O >>>> N_BACKUP_STORAGE >>>> >>>> On 9 April 2018 at 15:03, Scott Walker wrote: >>>> >>>>> Now suddenly I'm getting >>>>> >>>>> All my original storage domains are still there and are local ones. I >>>>> added the ISCSI domain just to see how it worked (and removed it). >>>>> >>>>> What can I do to fix this? >>>>> >>>>> "Cannot run VM. Running VM can not contain disks which are stored on a >>>>> backup storage domain." >>>>> >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users at ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dholler at redhat.com Tue Apr 10 15:07:44 2018 From: dholler at redhat.com (Dominik Holler) Date: Tue, 10 Apr 2018 17:07:44 +0200 Subject: [ovirt-users] OVN between two different datacenters with different networks In-Reply-To: References: Message-ID: <20180410170744.4d334366@t460p> On Tue, 10 Apr 2018 11:48:50 +0000 Vasily Lamykin wrote: > Hi, all > I try to configure ovn in engine, what I do by step: > 1.Created network test1 with external ovn provider on engine1 > 2.Created subnet for this network > 3.Connect engine2 to engine1 ovn provider(through ?add provider?) > 4.Successfully imported network test1 on engine2 > 5.I see subnet?s on all engines > 6.Created 2 VM with nic in network test1 on both engines > 7.Assigned ips from one subnet(192.168.10.0/24) to all VMs > The subnet is used to configure OVN's internal DHCP server. This means you use DHCP to assign IPs to the vNICs, which is already a good test if the VM is connected as expected. > Expected results: VM from engine1 can ping VM from engine2 in same > subnet in ovn network test1 > > Now, I don?t have ping ability between two VMs > > ovn-nbctl show > switch 54beaa3c-de8f-435f-b132-8542ddeb4b4b (test-ovn-phys) > port b580d44d-e616-42dd-9e17-63983d0f91e5 > addresses: ["00:1a:4a:16:01:01 dynamic"] > port cfd5f32c-00a7-419e-8bbe-27518a4c74dc > addresses: ["00:1a:4a:16:01:00 dynamic"] > > node from engine1 with testVM > vnet0: mtu 1500 qdisc pfifo_fast > master ovs-system state UNKNOWN qlen 1000 link/ether > fe:1a:4a:16:01:01 brd ff:ff:ff:ff:ff:ff inet6 > fe80::fc1a:4aff:fe16:101/64 scope link valid_lft forever > preferred_lft forever > > node from engine2 with testVM > vnet0: mtu 1500 qdisc pfifo_fast > master ovs-system state UNKNOWN qlen 1000 link/ether > fe:1a:4a:16:01:00 brd ff:ff:ff:ff:ff:ff inet6 > fe80::fc1a:4aff:fe16:100/64 scope link valid_lft forever > preferred_lft forever > > How can I do ovn connection? What I did wrong? > Please note that per host only a single OVN central is supported! Please check via sudo ovn-sbctl show on engine1 if both hosts are connected to OVN central engine1. Probably the host of engine2 is configured to use engine2 as it's OVN central. Probable the host of engine2 has to be connected to OVN central engine1 and the tunneling interface might require some configuration. Both is handled by executing /usr/libexec/ovirt-provider-ovn/setup_ovn_controller.sh \ IP-central tunneling-IP key_file cert_file ca_file on the host. Probably IP-central is IP-of-engine1 tunneling-IP is IP-of-host-of-engine-2 and key_file cert_file ca_file has to be stolen from host of engine1 and copied in a new location on host2 and configured on host2. > ________________________________ > > ?????????? ? ???? ????????? ????????????? ????????????? ??? > ?????????? ???, ??????? ??? ??????????. ? ????????? ????? ??????????? > ???????????????? ??????????, ??????? ?? ????? ???? ???????? ??? > ???????????? ???-????, ????? ?????????. ???? ?? ?? ??????? ????? > ?????????, ?? ?????????????, ?????????????, ??????????? ??? > ??????????????? ?????????? ????????? ??? ??? ????? ????????? ? > ?????????. ???? ?? ???????? ??? ????????? ????????, ??????????, > ??????????????? ???????? ??????????? ?? ???? ? ??????? ?? ???? > ?????????? ???? ????????? ? ????? ????????? ??? ????? ? ??????????. > > The information contained in this communication is intended solely > for the use of the individual or entity to whom it is addressed and > others authorized to receive it. It may contain confidential or > legally privileged information. The contents may not be disclosed or > used by anyone other than the addressee. If you are not the intended > recipient(s), any use, disclosure, copying, distribution or any > action taken or omitted to be taken in reliance on it is prohibited > and may be unlawful. If you have received this communication in error > please notify us immediately by responding to this email and then > delete the e-mail and all attachments and any copies thereof. > > ----- From i.am.stack at gmail.com Tue Apr 10 22:08:25 2018 From: i.am.stack at gmail.com (~Stack~) Date: Tue, 10 Apr 2018 17:08:25 -0500 Subject: [ovirt-users] How it is oVirt used in your Department? In-Reply-To: <7024229.PNvGaL56Xi@awels> References: <1522233082.6801.129.camel@fis.unical.it> <7024229.PNvGaL56Xi@awels> Message-ID: <115c8cc6-8357-8946-8ef2-72fea12065c8@gmail.com> On 04/09/2018 07:01 AM, Alexander Wels wrote: > On Sunday, April 8, 2018 10:33:50 AM EDT ~Stack~ wrote: [snip] >> Foreman is and overcomplicated buggy headache, IMO. Every time I or a >> coworker has tried to get it going it has been a massive >> time-suck-crash-and-burn. Add to it that my current security team has >> HUGE issues with Puppet (don't get me started - I like Puppet) and >> building Foreman by hand with Salt is just an awful awful awful >> experience I wouldn't wish on an enemy...just no. :-) >> DigitalRebar was looking SUPER promising, but they recently went to a >> model that MUST chat out to the Internet or it breaks itself (a complete >> no-go for me). A complete shame. >> So I'm back to Cobbler which is simple and works fantastically well, but >> doesn't really have any integrations into oVirt (that I'm aware of). I'm >> probably going to have to write something with the two API's. >> > > Have you looked at ansible? You can make some playbooks that call the REST api > and have it deploy the VMs for you. Or if you feel like writing your own > portal you can use the Java or Python SDK to access the REST api. > I have. It is one of the tools I've considered using. Thanks! ~Stack~ -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: OpenPGP digital signature URL: From i.am.stack at gmail.com Tue Apr 10 22:11:21 2018 From: i.am.stack at gmail.com (~Stack~) Date: Tue, 10 Apr 2018 17:11:21 -0500 Subject: [ovirt-users] How it is oVirt used in your Department? In-Reply-To: References: <1522233082.6801.129.camel@fis.unical.it> Message-ID: <5442e0f5-6fae-9393-1861-b41ec689b01e@gmail.com> On 04/09/2018 08:00 AM, Yaniv Kaul wrote: > On Sun, Apr 8, 2018 at 5:33 PM, ~Stack~ > I'm still learning how to set up something where my users can click a >> button on a webpage and get a VM spun up for a Graphical session on >> oVirt. I'm also still debating on the pros/cons for setting up oVirt >> VM's for things like JupyterNotebooks/RStudio Server/ect for the "I just >> want a web page to develop my code on and will submit to the cluster for >> the job run" crowd. > > > Few options to consider: > 1. oVirt user portal (with VM pools perhaps?) > 2.? vagrant with the oVirt provider > 3. ManageIQ service portal > 4. Ansible playbooks - a simple rule could suffice for most tasks. I'm been looking at 1. I haven't considered 2 yet - Interesting thought that I will look into. I just saw 3 for the first time from Pauls post and it looks very interesting! 4 is on my potential list too. Thanks! ~Stack~ -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: OpenPGP digital signature URL: From vincent at epicenergy.ca Tue Apr 10 23:40:15 2018 From: vincent at epicenergy.ca (Vincent Royer) Date: Tue, 10 Apr 2018 16:40:15 -0700 Subject: [ovirt-users] Node health bad after power outage In-Reply-To: References: Message-ID: These mounts: After the power failure, these mounts were missing on one of my nodes. I added them back using the + button, rebooted, and then the engine started back up. *Vincent Royer* *778-825-1057* *SUSTAINABLE MOBILE ENERGY SOLUTIONS* On Tue, Apr 10, 2018 at 1:13 AM, Ido Rosenzwig wrote: > Dear Vincent, > > Can you please explain what you did by 're-entering the mounts using > cockpit' and why you did it? > > Best regards, > Ido Rosenzwig > > > > On Mon, Apr 9, 2018 at 6:48 PM, Vincent Royer > wrote: > >> Does anyone have any clues about these errors? >> >> >> >> >> On Sat, Apr 7, 2018 at 9:02 PM, Vincent Royer >> wrote: >> >>> Suffered a long power outage that outlasted our huge UPS, so both my >>> nodes went down. >>> >>> Upon return, the nodes came back up but engine did not start because the >>> storage server takes longer to boot than the nodes do, so the NFS mounts >>> didn't reconnect. >>> >>> I manually re-entered the mounts using cockpit, rebooted the nodes and >>> the engine came back up along with all VMs. >>> >>> Now in cockpit under Node Status, It says Health: bad, and these >>> messages: >>> >>> >>> Everything seems to be working fine though. >>> >>> >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 25958 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 19079 bytes Desc: not available URL: From fernando.frediani at upx.com Wed Apr 11 04:36:58 2018 From: fernando.frediani at upx.com (FERNANDO FREDIANI) Date: Wed, 11 Apr 2018 01:36:58 -0300 Subject: [ovirt-users] =?utf-8?b?5Zue5aSN77yaUmU6IOWbnuWkje+8mlJlOiBvdmly?= =?utf-8?q?t_engine_HA?= In-Reply-To: References: <20180408135331.EE3AC1660101@webmail.sinamail.sina.com.cn> Message-ID: Hi Alex K, thanks. It was not clear the previous answers to me that's why I specified the quesiton if GUI meant Cockpit or Web Interface which was then well answered by Martin. Therefore thanks for that. Best regards Fernando 2018-04-09 13:35 GMT-03:00 Martin Sivak : > > You mentioned that can be done via the web GUI. Do you mean by cockpit > or by > > oVirt Engine Web Interface itself ? > > Only via the oVirt web admin interface. You first add a standard storage > domain, wait for a VM that represents the engine to appear (name: > HostedEngine) and then you can add an additional host with hosted engine > bits directly from the webadmin UI (HostedEngine side tab of Add new host > dialog, select Deploy). > > Best regards > > Martin Sivak > > On Mon, Apr 9, 2018 at 6:21 PM, FERNANDO FREDIANI < > fernando.frediani at upx.com> wrote: > >> Hello Simone >> >> The doubt is once one hosted engine is deployed to one of the hosts the >> process to deploy in the second one is exactly the same or does it have any >> minor particularity ? You mentioned that can be done via the web GUI. Do >> you mean by cockpit or by oVirt Engine Web Interface itself ? >> >> Thanks >> Fernando >> >> 2018-04-09 7:32 GMT-03:00 Simone Tiraboschi : >> >>> >>> >>> On Sun, Apr 8, 2018 at 3:53 PM, wrote: >>> >>>> sorry. I do not know how to describe my qeustion >>>> I want to add a hosted-engine, I use same nfs path with first >>>> hosted-engine, but has some error. >>>> --== STORAGE CONFIGURATION ==-- >>>> >>>> Please specify the storage you would like to use (glusterfs, >>>> iscsi, fc, nfs3, nfs4)[nfs3]: >>>> Please specify the full shared storage connection path to use >>>> (example: host:/path): 192.168.122.218:/exports/hosted-engine-test1 >>>> [ ERROR ] The selected device already contains a storage domain. >>>> [ ERROR ] Setup of additional hosts using this software is not allowed >>>> anymore. Please use the engine web interface to deploy any additional hosts. >>>> >>> >>> Since 4.0 you should add additional hosted-engine hosts directly from >>> the webadmin UI. >>> >>> >>>> [ ERROR ] Failed to execute stage 'Environment customization': Setup of >>>> additional hosts using this software is not allowed anymore. Please use the >>>> engine web interface to deploy any additional hosts. >>>> [ INFO ] Stage: Clean up >>>> [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine- >>>> setup/answers/answers-20180408214554.conf' >>>> [ INFO ] Stage: Pre-termination >>>> [ INFO ] Stage: Termination >>>> [ ERROR ] Hosted Engine deployment failed >>>> Log file is located at /var/log/ovirt-hosted-engine-s >>>> etup/ovirt-hosted-engine-setup-20180408214515-4vofq6.log >>>> >>>> >>>> >>>> ----- ???? ----- >>>> ????Alex K >>>> ????dhy336 at sina.com >>>> ????FERNANDO FREDIANI , users < >>>> users at ovirt.org> >>>> ???Re: [ovirt-users] ???Re: ovirt engine HA >>>> ???2018?04?08? 19?45? >>>> >>>> Are you a troll? >>>> >>>> >>>> On Sun, Apr 8, 2018, 12:15 wrote: >>>> >>>> >>>> Hi, I hava two node, and deploy hosted-engine by #hosted-engine >>>> --deploy, >>>> I find two hosted-engine that i deploied is independent, how to make >>>> my hosted-engine is HA? >>>> >>>> ----- ???? ----- >>>> ????Alex K >>>> ????FERNANDO FREDIANI >>>> ????users >>>> ???Re: [ovirt-users] ovirt engine HA >>>> ???2018?04?04? 01?40? >>>> >>>> In case you need HA for the engine you need to deploy it to other hosts >>>> also through the GUI. >>>> >>>> >>>> On Tue, Apr 3, 2018 at 4:47 PM, FERNANDO FREDIANI < >>>> fernando.frediani at upx.com> wrote: >>>> >>>> Is it enough to deploy the Self-Hosted engine in just one Host of the >>>> cluster or is it necessary to repeat the process in each of the nodes that >>>> must be able to run it ? >>>> >>>> Thanks >>>> Fernando >>>> >>>> 2018-04-03 2:01 GMT-03:00 Vincent Royer : >>>> >>>> Same thing, the engine in this case is "self-hosted", as in, it runs in >>>> a VM hosted on the cluster that it is managing. I am a beginner here, but >>>> from my understanding, each node is always checking on the health of the >>>> engine VM. If the engine is missing (ie, the host running it has gone >>>> down), then another available, healthy host will spawn up the engine and >>>> you will regain access. >>>> >>>> In my experience this has worked very reliably. I have 2 hosts, both >>>> are "able" to run the engine VM. If I take one host down, I am not able to >>>> load the engine GUI. But if I wait a few minutes, then I regain access, >>>> and see that the engine is now running on the remaining healthy host. >>>> >>>> *Vincent Royer* >>>> *778-825-1057 <(778)%20825-1057>* >>>> >>>> >>>> >>>> *SUSTAINABLE MOBILE ENERGY SOLUTIONS* >>>> >>>> >>>> >>>> >>>> On Mon, Apr 2, 2018 at 6:07 PM, wrote: >>>> >>>> what different between self-hosted engine and hosted engine? I find a >>>> project ovirt-hosted-engine-ha >>>> https: >>>> //github.com/oVirt/ovirt-hosted-engine-ha >>>> ----- ???? ----- >>>> ????Vincent Royer >>>> ????dhy336 at sina.com >>>> ????users >>>> ???Re: [ovirt-users] ovirt engine HA >>>> ???2018?04?03? 08?57? >>>> >>>> If your node running self-hosted engine crashes, the hosted engine will >>>> be started up on another node. It just takes a few minutes for this all to >>>> happen, but it works reliably in my experience. >>>> >>>> >>>> >>>> On Mon, Apr 2, 2018 at 5:42 PM, wrote: >>>> >>>> How to solute ovirt engine HA, I have a three node cluster, one of is >>>> deploy engine and node , others are node, if node that deplay engine and >>>> node crash, How to ensure my server is up? >>>> _______________________________________________ >>>> Users mailing list >>>> Users at ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users at ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users at ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users at ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> _______________________________________________ >>>> Users mailing list >>>> Users at ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users at ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From nicolas.vaye at province-sud.nc Wed Apr 11 06:02:58 2018 From: nicolas.vaye at province-sud.nc (Nicolas Vaye) Date: Wed, 11 Apr 2018 06:02:58 +0000 Subject: [ovirt-users] ovirt and OpenVswitch Message-ID: <1523426573.8484.3.camel@province-sud.nc> Hello, Does anyone have any feedback on OVirt (4.x) and Open VSwitch ? May be with DPDK ? What are the pros ans cons ? Are the performances very improved with it ? Is this url a good start to go with ovirt 4.2 ? https://www.ovirt.org/blog/2017/09/ovs-dpdk/ Thanks. Nicolas VAYE ________________________________ [ImageGenerationNC] From gsswzt at pku.edu.cn Wed Apr 11 06:19:38 2018 From: gsswzt at pku.edu.cn (gsswzt at pku.edu.cn) Date: Wed, 11 Apr 2018 14:19:38 +0800 Subject: [ovirt-users] Some questions about Ovirt REST API Message-ID: <2018041114193731867221@pku.edu.cn> Hi, I wants to creating my own service under ../vms/{vmid}/myservice.Here is my methods: 1. create VmMytestService in https://github.com/oVirt/ovirt-engine-api-model project. add @Service VmMytestService mytests() in VmService .java 2. mvn install it and change the root pom.xml 4.3.9-SNAPSHOT in my Ovirt project. 3.create BackendVmMytestService implements VmMytestResource 4.override get() and add() methods. After that, I use curl tool to send GET and POST request. GET is working and return. However, I get this return after POST request. Would you help me with that issue? Thanks, wenzt -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Catch.jpg Type: image/jpeg Size: 88643 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Catch020D.jpg Type: image/jpeg Size: 73943 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: CatchFF54.jpg Type: image/jpeg Size: 40899 bytes Desc: not available URL: From sleviim at redhat.com Wed Apr 11 07:10:39 2018 From: sleviim at redhat.com (Shani Leviim) Date: Wed, 11 Apr 2018 10:10:39 +0300 Subject: [ovirt-users] Some questions about Ovirt REST API In-Reply-To: <2018041114193731867221@pku.edu.cn> References: <2018041114193731867221@pku.edu.cn> Message-ID: Hi Wenzt, According to [1], maybe you should use a '-d' flag since it seems to send the Content-Type. Hope it helps. [1] https://stackoverflow.com/questions/7172784/how-to-post-json-data-with-curl-from-terminal-commandline-to-test-spring-rest *Regards,* *Shani Leviim* On Wed, Apr 11, 2018 at 9:19 AM, gsswzt at pku.edu.cn wrote: > Hi, > > I wants to creating my own service under ../vms/{vmid}/myservice.Here is > my methods: > > 1. create VmMytestService in *https://github.com/oVirt/ovirt-engine-api-model > project.* > > add *@Service VmMytestService mytests() in *VmService .java > > 2. mvn install it and change the root pom.xml *4.3.9-SNAPSHOT > * in my Ovirt project. > 3.create BackendVmMytestService implements VmMytestResource > 4.override *get() and add() *methods. > > After that, I use *curl* tool to send GET and POST request. GET is > working and return. > However, I get this return after POST request. > > > Would you help me with that issue? > > Thanks, > wenzt > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Catch.jpg Type: image/jpeg Size: 88643 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: CatchFF54.jpg Type: image/jpeg Size: 40899 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Catch020D.jpg Type: image/jpeg Size: 73943 bytes Desc: not available URL: From dhy336 at sina.com Wed Apr 11 08:23:25 2018 From: dhy336 at sina.com (dhy336 at sina.com) Date: Wed, 11 Apr 2018 16:23:25 +0800 Subject: [ovirt-users] why hosted-engine use OVA Message-ID: <20180411082325.7047B16600FF@webmail.sinamail.sina.com.cn> Hi? I want to know why hosted-engine use OVA, not directly use qcow2? thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: From didi at redhat.com Wed Apr 11 08:46:11 2018 From: didi at redhat.com (Yedidyah Bar David) Date: Wed, 11 Apr 2018 11:46:11 +0300 Subject: [ovirt-users] why hosted-engine use OVA In-Reply-To: <20180411082325.7047B16600FF@webmail.sinamail.sina.com.cn> References: <20180411082325.7047B16600FF@webmail.sinamail.sina.com.cn> Message-ID: On Wed, Apr 11, 2018 at 11:23 AM, wrote: > Hi? > I want to know why hosted-engine use OVA, not directly use qcow2? Can't say I remember why we started with OVA, I guess it's simply the standard format for distributing appliances. See the following for supporting qcow2: https://bugzilla.redhat.com/show_bug.cgi?id=1274065 https://bugzilla.redhat.com/show_bug.cgi?id=1528987 Best regards, -- Didi From spfma.tech at e.mail.fr Wed Apr 11 11:01:08 2018 From: spfma.tech at e.mail.fr (spfma.tech at e.mail.fr) Date: Wed, 11 Apr 2018 13:01:08 +0200 Subject: [ovirt-users] Ovirt 4.2. Isolated (host-only) network In-Reply-To: <1523253110.846942566@f221.i.mail.ru> References: <1523253110.846942566@f221.i.mail.ru> Message-ID: <20180411110108.81712E510F@smtp01.mail.de> Hi, Yes, clear informations about this are not available and I had to try a little bit before getting a result. The thing is you can create an internal network but it has to be linked to some device, otherwise the network will be considered as "non functional" and your domain, server or datacenter (depending at which level you decide to set ip), will return errors. At the datacenter level, I wasn't even able to have a usable infrastructure before correcting this. The solution is very close to your idea, so what about connecting these VMs to a "ghost" network interface, which is just existing virtually and behaving like a real one but without bothering you ? This thing is called the "dummy" module, and can be configured at OS level. * Configure and use the "dummy" module and create an active interface - /etc/modprobe.d/dummy.conf install dummy /sbin/modprobe --ignore-install dummy; ip link add dummy_1 type dummy - /etc/modules-load.d/dummy.conf # Dummy net driver for internal network dummy * Configure this device "dummy_1" as linked to a dedicated bridge "smb_testing". - /etc/sysconfig/network-scripts/ifcfg-dummy_1 # Generated by VDSM version 4.20.23-1.el7.centos DEVICE=dummy_1 BRIDGE=smb_testing ONBOOT=yes MTU=1500 DEFROUTE=no NM_CONTROLLED=no IPV6INIT=no * Classic bridge definition. - /etc/sysconfig/network-scripts/ifcfg-smb_testing # Generated by VDSM version 4.20.23-1.el7.centos DEVICE=smb_testing TYPE=Bridge DELAY=0 STP=off ONBOOT=yes MTU=1500 DEFROUTE=no NM_CONTROLLED=no IPV6INIT=yes IPV6_AUTOCONF=yes You can now attach this network to your machines, and they will be able to communicate through it. My main concern now is : will this configuration survive if I modify things and network scripts are regenerated by the engine ? Regards Le 09-Apr-2018 08:37:23 +0200, a_shilov at inbox.ru a crit: Hi List! Recently I've started using ovirt 4.2 and faced that I cannot find any guide how to do it in ovirt.org documentation. Need help with configure isolated/host-only (not connect to real NIC) network that allowed to communicate two or more VMs into private network. May be exist a solution? I did it such: linked logical networt to real NIC without connect anywhere (link - DOWN), but this solution is a little bit odd. How to exclude read NIC? ------------------------------------------------------------------------------------------------- FreeMail powered by mail.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From moritz.baumann at inf.ethz.ch Wed Apr 11 12:14:57 2018 From: moritz.baumann at inf.ethz.ch (Moritz Baumann) Date: Wed, 11 Apr 2018 14:14:57 +0200 Subject: [ovirt-users] user rhel7.5 as ovirt-node Message-ID: <248260c5-df2f-1b75-fe36-a33e6ed545cf@inf.ethz.ch> After installing a RHEL7.5 server and adding the host via ovirt-engine it initially works, but afterwards it findes the followgin upgrades which break e.g. yum: -> Running transaction check ---> Package pyOpenSSL.x86_64 0:0.13.1-3.el7 will be obsoleted ---> Package python-dateutil.noarch 0:1.5-7.el7 will be updated ---> Package python-dateutil.noarch 1:2.4.2-1.el7 will be an update ---> Package python2-pyOpenSSL.noarch 0:16.2.0-3.el7 will be obsoleting ========================================================================================================================================================================================================================================================================================== Package Arch Version Repository Size ========================================================================================================================================================================================================================================================================================== Installing: python2-pyOpenSSL noarch 16.2.0-3.el7 ovirt-4.2-centos-ovirt42 88 k replacing pyOpenSSL.x86_64 0.13.1-3.el7 Updating: python-dateutil noarch 1:2.4.2-1.el7 ovirt-4.2-centos-ovirt42 83 k Transaction Summary ========================================================================================================================================================================================================================================================================================== Install 1 Package Upgrade 1 Package It seems that pyOpenSSL.x86 is needed by yum. Will there be updated ovirt packages? Best Mo From sizzlinsaguaro at gmail.com Wed Apr 11 14:55:42 2018 From: sizzlinsaguaro at gmail.com (Cole Johnson) Date: Wed, 11 Apr 2018 07:55:42 -0700 Subject: [ovirt-users] Can't sync networks In-Reply-To: <20180409212905.79d92f67@t460p> References: <20180409095453.112d9684@t460p> <20180409172042.34c9ffa7@t460p> <20180409212905.79d92f67@t460p> Message-ID: I totally missed that. Thanks, that clears it up! On Mon, Apr 9, 2018 at 12:29 PM, Dominik Holler wrote: > Different logical networks in oVirt attached to the same host should use > different IP networks. > > On Mon, 9 Apr 2018 09:16:49 -0700 > Cole Johnson wrote: > >> If I mouse over the ovirtmgmt label in "Setup Host", it indicates that >> it is the default route. Please see the attached screen shot. The >> output of ip route in the terminal shows: >> >> [root at kerensk ~]# ip route >> default via 10.0.0.1 dev eno2 proto static metric 100 >> default via 10.0.0.1 dev eno3 proto static metric 101 >> 10.0.0.0/24 dev ovirtmgmt proto kernel scope link src 10.0.0.240 >> 10.0.0.0/24 dev gluster proto kernel scope link src 10.0.0.243 >> 10.0.0.0/24 dev eno2 proto kernel scope link src 10.0.0.241 metric 100 >> 10.0.0.0/24 dev eno3 proto kernel scope link src 10.0.0.242 metric 101 >> 169.254.0.0/16 dev ovirtmgmt scope link metric 1021 >> 169.254.0.0/16 dev gluster scope link metric 1028 >> >> On Mon, Apr 9, 2018 at 8:20 AM, Dominik Holler >> wrote: >> > On Mon, 9 Apr 2018 07:39:13 -0700 >> > Cole Johnson wrote: >> > >> >> Where can I find this information? The best I can find is if I am >> >> in the "Setup Host" dialog, and mouse over the un-synced network. >> >> The message reads "Host Network's configurations differ from DC". >> > >> > The table below this message in dialog.jpeg shows the values not in >> > sync, which is the default route of the host. >> > >> >> If this >> >> is the error message, what do I need to do to make the >> >> configurations match? >> > >> > Ensure that the gateway of ovirtmgt is the default route on the >> > host. >> >> Isn't this the whole point of what I am trying to do here? I >> >> have attached some screenshots of the different messages that I >> >> encounter. >> >> >> >> On Mon, Apr 9, 2018 at 12:54 AM, Dominik Holler >> >> wrote: >> >> > On Wed, 4 Apr 2018 11:19:33 -0700 >> >> > Cole Johnson wrote: >> >> > >> >> >> Hello, >> >> >> I am trying to set up a 3 host gluster hyperconverged self >> >> >> hosted engine running on oVirt Nodes. ( I think that I have all >> >> >> of the buzzwords here) All of the hardware is the same. I am >> >> >> using the guide from here: >> >> >> https://www.ovirt.org/blog/2018/02/up-and-running-with-ovirt-4-2-and-gluster-storage/ >> >> >> and the documentation here: >> >> >> https://www.ovirt.org/documentation/gluster-hyperconverged/Gluster_Hyperconverged_Guide/ >> >> >> for reference. >> >> >> I have used the setup wizards from the cockpit interface to >> >> >> setup gluster and the hosted engine successfully. I have >> >> >> configured the gluster storage and setup all of the hosts >> >> >> inside the hosted engine. >> >> >> >> >> >> My problem occurs when I try to configure a separate storage >> >> >> network as shown in the blog post. I can get thru the process >> >> >> as outlined, on all three hosts, but the status will not change >> >> >> from "out-of-sync". I can press the "Sync All Networks", and I >> >> >> get a notification which says "Finished SyncAllHostNetworks", >> >> >> but the status of the storage network remains "out-of-sync" . >> >> >> >> >> > >> >> > >> >> > The "Setup Host Networks" dialog presents the information why the >> >> > network is marked as "out-of-sync". >> >> > Does the information presented helps you? >> >> > >> >> >> I don't know if this is related, but I cannot migrate the >> >> >> HostedEngine vm between hosts. >> >> >> >> >> >> I have attached the contents of vdsm.log >> >> >> >> >> >> Any help is appreciated. >> >> > >> > > From rightkicktech at gmail.com Wed Apr 11 15:57:48 2018 From: rightkicktech at gmail.com (Alex K) Date: Wed, 11 Apr 2018 18:57:48 +0300 Subject: [ovirt-users] ovirt snapshot issue In-Reply-To: References: Message-ID: Thanx Yaniv, I will try to follow your advice. Alex On Tue, Apr 3, 2018 at 8:54 PM, Yaniv Kaul wrote: > > > On Sun, Apr 1, 2018 at 9:04 PM, Alex K wrote: > >> Checking further the logs I see this error given from libvirt of the host >> that has the guest VM running: >> >> Apr 1 17:53:41 v0 libvirtd: 2018-04-01 17:53:41.298+0000: 1862: warning >> : qemuDomainObjBeginJobInternal:3847 : Cannot start job (query, none) >> for domain Data-Server; current job is (async nested, snapshot) owned by >> (1863 remoteDispatchDomainSnapshotCreateXML, 1863 >> remoteDispatchDomainSnapshotCreateXML) for (39s, 41s) >> Apr 1 17:53:41 v0 libvirtd: 2018-04-01 17:53:41.299+0000: 1862: error : >> qemuDomainObjBeginJobInternal:3859 : Timed out during operation: cannot >> acquire state change lock (held by remoteDispatchDomainSnapshotCreateXML) >> Apr 1 17:53:57 v0 journal: vdsm Executor WARN Worker blocked: > name=jsonrpc/3 running > u'vmID': u'6bdb3d02-cc33-4019-97cd-7447aecc1e02', u'snapDrives': >> [{u'baseVolumeID': u'adfabed5-451b-4f46-b22a-45f720b06110', u'domainID': >> u'2c4b8d45-3d05-4619-9a36-1ecd199d3056', u'volumeID': >> u'cc0d0772-924c-46db-8ad6-a2b0897c313f', u'imageID': >> u'7eeadedc-f247-4a31-840d-4de622bf3541'}, {u'baseVolumeID': >> u'0d960c12-3bcf-4918-896d-bd8e68b5278b', u'domainID': >> u'2c4b8d45-3d05-4619-9a36-1ecd199d3056', u'volumeID': >> u'590a6bdd-a9e2-444e-87bc-721c5f8586eb', u'imageID': >> u'da0e4111-6bbe-43cb-bf59-db5fbf5c3e38'}]}, 'jsonrpc': '2.0', 'method': >> u'VM.snapshot', 'id': u'be7912e6-ba3d-4357-8ba1-abe40825acf1'} at >> 0x3bf84d0> timeout=60, duration=60 at 0x3bf8050> task#=416 at 0x20d7f90> >> >> >> Immediately after above the engine reports the VM as unresponsive. >> > > If it's reproducible, it'd be great if you could: > 1. Run libvirt with debug logs > 2. Get a dump of libvirt when this happens (with gstack for example). > 3. File a bug on libvirt. > > Thanks, > Y. > > >> The SPM host does not log any issues. >> >> In the same time, the 3 hosts are fairly idle with only one running guest >> VM. The gluster traffic is dedicated to a separate Gbit NIC of the servers >> (dedicated VLAN) while the management network is on a separate network. The >> gluster traffic does not exceed 40 Mbps during the snapshot operation. >> Can't understand why libvirt is logging timeout. >> >> Alex >> >> On Thu, Mar 29, 2018 at 9:42 PM, Alex K wrote: >> >>> Any idea with this issue? >>> I am still trying to understand what may be causing this issue. >>> >>> Many thanx for any assistance. >>> >>> Alex >>> >>> On Wed, Mar 28, 2018 at 10:06 AM, Yedidyah Bar David >>> wrote: >>> >>>> On Tue, Mar 27, 2018 at 3:38 PM, Sandro Bonazzola >>>> wrote: >>>> >>>>> >>>>> >>>>> 2018-03-27 14:34 GMT+02:00 Alex K : >>>>> >>>>>> Hi All, >>>>>> >>>>>> Any idea on the below? >>>>>> >>>>>> I am using oVirt Guest Tools 4.2-1.el7.centos for the VM. >>>>>> The Window 2016 server VM (which it the one with the relatively big >>>>>> disks: 500 GB) it is consistently rendered unresponsive when trying to get >>>>>> a snapshot. >>>>>> I amy provide any other additional logs if needed. >>>>>> >>>>> >>>>> Adding some people to the thread >>>>> >>>> >>>> Adding more people for this part. >>>> >>>> >>>>> >>>>> >>>>> >>>>>> >>>>>> Alex >>>>>> >>>>>> On Sun, Mar 25, 2018 at 7:30 PM, Alex K >>>>>> wrote: >>>>>> >>>>>>> Hi folks, >>>>>>> >>>>>>> I am facing frequently the following issue: >>>>>>> >>>>>>> On some large VMs (Windows 2016 with two disk drives, 60GB and >>>>>>> 500GB) when attempting to create a snapshot of the VM, the VM becomes >>>>>>> unresponsive. >>>>>>> >>>>>>> The errors that I managed to collect were: >>>>>>> >>>>>>> vdsm error at host hosting the VM: >>>>>>> 2018-03-25 14:40:13,442+0000 WARN (vdsm.Scheduler) [Executor] >>>>>>> Worker blocked: >>>>>> {'params': {u'frozen': False, u'vmID': u'a5c761a2-41cd-40c2-b65f-f3819293e8a4', >>>>>>> u'snapDrives': [{u'baseVolumeID': u'2a33e585-ece8-4f4d-b45d-5ecc9239200e', >>>>>>> u'domainID': u'888e3aae-f49f-42f7-a7fa-76700befabea', u'volumeID': >>>>>>> u'e9a01ebd-83dd-40c3-8c83-5302b0d15e04', u'imageID': >>>>>>> u'c75b8e93-3067-4472-bf24-dafada224e4d'}, {u'baseVolumeID': >>>>>>> u'3fb2278c-1b0d-4677-a529-99084e4b08af', u'domainID': >>>>>>> u'888e3aae-f49f-42f7-a7fa-76700befabea', u'volumeID': >>>>>>> u'78e6b6b1-2406-4393-8d92-831a6d4f1337', u'imageID': >>>>>>> u'd4223744-bf5d-427b-bec2-f14b9bc2ef81'}]}, 'jsonrpc': '2.0', >>>>>>> 'method': u'VM.snapshot', 'id': u'89555c87-9701-4260-9952-789965261e65'} >>>>>>> at 0x7fca4004cc90> timeout=60, duration=60 at 0x39d8210> task#=155842 at >>>>>>> 0x2240e10> (executor:351) >>>>>>> 2018-03-25 14:40:15,261+0000 INFO (jsonrpc/3) >>>>>>> [jsonrpc.JsonRpcServer] RPC call VM.getStats failed (error 1) in 0.01 >>>>>>> seconds (__init__:539) >>>>>>> 2018-03-25 14:40:17,471+0000 WARN (jsonrpc/5) [virt.vm] >>>>>>> (vmId='a5c761a2-41cd-40c2-b65f-f3819293e8a4') monitor became >>>>>>> unresponsive (command timeout, age=67.9100000001) (vm:5132) >>>>>>> >>>>>>> engine.log: >>>>>>> 2018-03-25 14:40:19,875Z WARN [org.ovirt.engine.core.dal.dbb >>>>>>> roker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler2) >>>>>>> [1d737df7] EVENT_ID: VM_NOT_RESPONDING(126), Correlation ID: null, Call >>>>>>> Stack: null, Custom ID: null, Custom Event ID: -1, Message: VM Data-Server >>>>>>> is not responding. >>>>>>> >>>>>>> 2018-03-25 14:42:13,708Z ERROR [org.ovirt.engine.core.dal.dbb >>>>>>> roker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler5) >>>>>>> [17789048-009a-454b-b8ad-2c72c7cd37aa] EVENT_ID: >>>>>>> VDS_BROKER_COMMAND_FAILURE(10,802), Correlation ID: null, Call >>>>>>> Stack: null, Custom ID: null, Custom Event ID: -1, Message: VDSM v1.cluster >>>>>>> command SnapshotVDS failed: Message timeout which can be caused by >>>>>>> communication issues >>>>>>> 2018-03-25 14:42:13,708Z ERROR [org.ovirt.engine.core.vdsbrok >>>>>>> er.vdsbroker.SnapshotVDSCommand] (DefaultQuartzScheduler5) >>>>>>> [17789048-009a-454b-b8ad-2c72c7cd37aa] Command >>>>>>> 'SnapshotVDSCommand(HostName = v1.cluster, SnapshotVDSCommandParameters:{runAsync='true', >>>>>>> hostId='a713d988-ee03-4ff0-a0cd-dc4cde1507f4', >>>>>>> vmId='a5c761a2-41cd-40c2-b65f-f3819293e8a4'})' execution failed: >>>>>>> VDSGenericException: VDSNetworkException: Message timeout which can be >>>>>>> caused by communication issues >>>>>>> 2018-03-25 14:42:13,708Z WARN [org.ovirt.engine.core.bll.sna >>>>>>> pshots.CreateAllSnapshotsFromVmCommand] (DefaultQuartzScheduler5) >>>>>>> [17789048-009a-454b-b8ad-2c72c7cd37aa] Could not perform live >>>>>>> snapshot due to error, VM will still be configured to the new created >>>>>>> snapshot: EngineException: org.ovirt.engine.core.vdsbroke >>>>>>> r.vdsbroker.VDSNetworkException: VDSGenericException: >>>>>>> VDSNetworkException: Message timeout which can be caused by communication >>>>>>> issues (Failed with error VDS_NETWORK_ERROR and code 5022) >>>>>>> 2018-03-25 14:42:13,708Z WARN [org.ovirt.engine.core.vdsbroker.VdsManager] >>>>>>> (org.ovirt.thread.pool-6-thread-15) [17789048-009a-454b-b8ad-2c72c7cd37aa] >>>>>>> Host 'v1.cluster' is not responding. It will stay in Connecting state for a >>>>>>> grace period of 61 seconds and after that an attempt to fence the host will >>>>>>> be issued. >>>>>>> 2018-03-25 14:42:13,725Z WARN [org.ovirt.engine.core.dal.dbb >>>>>>> roker.auditloghandling.AuditLogDirector] >>>>>>> (org.ovirt.thread.pool-6-thread-15) [17789048-009a-454b-b8ad-2c72c7cd37aa] >>>>>>> EVENT_ID: VDS_HOST_NOT_RESPONDING_CONNECTING(9,008), Correlation >>>>>>> ID: null, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: >>>>>>> Host v1.cluster is not responding. It will stay in Connecting state for a >>>>>>> grace period of 61 seconds and after that an attempt to fence the host will >>>>>>> be issued. >>>>>>> 2018-03-25 14:42:13,751Z WARN [org.ovirt.engine.core.dal.dbb >>>>>>> roker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler5) >>>>>>> [17789048-009a-454b-b8ad-2c72c7cd37aa] EVENT_ID: >>>>>>> USER_CREATE_LIVE_SNAPSHOT_FINISHED_FAILURE(170), Correlation ID: >>>>>>> 17789048-009a-454b-b8ad-2c72c7cd37aa, Job ID: >>>>>>> 16e48c28-a8c7-4841-bd81-1f2d370f345d, Call Stack: >>>>>>> org.ovirt.engine.core.common.errors.EngineException: >>>>>>> EngineException: org.ovirt.engine.core.vdsbroke >>>>>>> r.vdsbroker.VDSNetworkException: VDSGenericException: >>>>>>> VDSNetworkException: Message timeout which can be caused by communication >>>>>>> issues (Failed with error VDS_NETWORK_ERROR and code 5022) >>>>>>> 2018-03-25 14:42:14,372Z ERROR [org.ovirt.engine.core.dal.dbb >>>>>>> roker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler5) >>>>>>> [] EVENT_ID: USER_CREATE_SNAPSHOT_FINISHED_FAILURE(69), Correlation >>>>>>> ID: 17789048-009a-454b-b8ad-2c72c7cd37aa, Job ID: >>>>>>> 16e48c28-a8c7-4841-bd81-1f2d370f345d, Call Stack: >>>>>>> org.ovirt.engine.core.common.errors.EngineException: >>>>>>> EngineException: org.ovirt.engine.core.vdsbroke >>>>>>> r.vdsbroker.VDSNetworkException: VDSGenericException: >>>>>>> VDSNetworkException: Message timeout which can be caused by communication >>>>>>> issues (Failed with error VDS_NETWORK_ERROR and code 5022) >>>>>>> 2018-03-25 14:42:14,372Z WARN [org.ovirt.engine.core.bll.Con >>>>>>> currentChildCommandsExecutionCallback] (DefaultQuartzScheduler5) [] >>>>>>> Command 'CreateAllSnapshotsFromVm' id: 'bad4f5be-5306-413f-a86a-513b3cfd3c66' >>>>>>> end method execution failed, as the command isn't marked for endAction() >>>>>>> retries silently ignoring >>>>>>> 2018-03-25 14:42:15,951Z WARN [org.ovirt.engine.core.dal.dbb >>>>>>> roker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler5) >>>>>>> [5017c163] EVENT_ID: VDS_NO_SELINUX_ENFORCEMENT(25), Correlation >>>>>>> ID: null, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: >>>>>>> Host v1.cluster does not enforce SELinux. Current status: DISABLED >>>>>>> 2018-03-25 14:42:15,951Z WARN [org.ovirt.engine.core.vdsbroker.VdsManager] >>>>>>> (DefaultQuartzScheduler5) [5017c163] Host 'v1.cluster' is running with >>>>>>> SELinux in 'DISABLED' mode >>>>>>> >>>>>>> As soon as the VM is unresponsive, the VM console that was already >>>>>>> open freezes. I can resume the VM only by powering off and on. >>>>>>> >>>>>>> I am using ovirt 4.1.9 with 3 nodes and self-hosted engine. I am >>>>>>> running mostly Windows 10 and Windows 2016 server VMs. I have installed >>>>>>> latest guest agents from: >>>>>>> >>>>>>> http://resources.ovirt.org/pub/ovirt-4.2/iso/oVirt-toolsSetu >>>>>>> p/4.2-1.el7.centos/ >>>>>>> >>>>>>> At the screen where one takes a snapshot I get a warning saying >>>>>>> "Could not detect guest agent on the VM. Note that without guest agent the >>>>>>> data on the created snapshot may be inconsistent". See attached. I have >>>>>>> verified that ovirt guest tools are installed and shown at installed apps >>>>>>> at engine GUI. Also Ovirt Guest Agent (32 bit) and qemu-ga are listed as >>>>>>> running at the windows tasks manager. Shouldn't ovirt guest agent be 64 bit >>>>>>> on Windows 64 bit? >>>>>>> >>>>>> >>>> No idea, but I do not think it's related to your problem of freezing >>>> while taking a snapshot. >>>> >>>> This error was already discussed in the past, see e.g.: >>>> >>>> http://lists.ovirt.org/pipermail/users/2017-June/082577.html >>>> >>>> Best regards, >>>> -- >>>> Didi >>>> >>> >>> >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From antunez.sebastian at gmail.com Wed Apr 11 16:00:26 2018 From: antunez.sebastian at gmail.com (Sebastian Antunez N.) Date: Wed, 11 Apr 2018 13:00:26 -0300 Subject: [ovirt-users] Migrate VM from KVM to Ovirt Message-ID: Hello Guys I have two servers with ovirt 4.1 and I need to make v2v from KVM to Ovirt. When add the new External Provider show me the following error in qemu+ssh://root at IP/system VDSM FQDN command GetVmsNamesFromExternalProvider failed: Cannot recv data: Host Key verification failed. Connection reset by peer Now when add with tcp show me -------------- next part -------------- An HTML attachment was scrubbed... URL: From antunez.sebastian at gmail.com Wed Apr 11 16:07:04 2018 From: antunez.sebastian at gmail.com (Sebastian Antunez N.) Date: Wed, 11 Apr 2018 13:07:04 -0300 Subject: [ovirt-users] Error V2V Message-ID: Hello Guys I have two servers with ovirt 4.1 and I need to make v2v from KVM to Ovirt. When add the new External Provider show me the following error in qemu+ssh://root at IP/system VDSM FQDN command GetVmsNamesFromExternalProvider failed: Cannot recv data: Host Key verification failed. Connection reset by peer Now when add with tcp show me VDSM FQDN command GetVmsNamesFromExternalProvider failed: Unable to connect to server at 'IP:16509' Connection Refused For ssh I run sudo -u vdsm ssh-keygen But i received Permision Denied. How can I resolve this issue Thanks for your help Sebastian -------------- next part -------------- An HTML attachment was scrubbed... URL: From michal.skrivanek at redhat.com Wed Apr 11 17:17:00 2018 From: michal.skrivanek at redhat.com (Michal Skrivanek) Date: Wed, 11 Apr 2018 19:17:00 +0200 Subject: [ovirt-users] Migrate VM from KVM to Ovirt In-Reply-To: References: Message-ID: <13D2CB9C-432C-4C99-9408-B8D754276BE2@redhat.com> > On 11 Apr 2018, at 18:00, Sebastian Antunez N. wrote: > > Hello Guys > > I have two servers with ovirt 4.1 and I need to make v2v from KVM to Ovirt. > > When add the new External Provider show me the following error in qemu+ssh://root at IP/system > > VDSM FQDN command GetVmsNamesFromExternalProvider failed: Cannot recv data: Host Key verification failed. Connection reset by peer you do need to exchange keys properly up front, so ?vdsm? user can ssh without pwd prompt > > Now when add with tcp show me > > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users From michal.skrivanek at redhat.com Wed Apr 11 17:19:20 2018 From: michal.skrivanek at redhat.com (Michal Skrivanek) Date: Wed, 11 Apr 2018 19:19:20 +0200 Subject: [ovirt-users] Error V2V In-Reply-To: References: Message-ID: <621B3343-D85B-4236-8DB3-C59475AA849F@redhat.com> > On 11 Apr 2018, at 18:07, Sebastian Antunez N. wrote: > > Hello Guys > > I have two servers with ovirt 4.1 and I need to make v2v from KVM to Ovirt. > > When add the new External Provider show me the following error in qemu+ssh://root at IP/system > > VDSM FQDN command GetVmsNamesFromExternalProvider failed: Cannot recv data: Host Key verification failed. Connection reset by peer > > Now when add with tcp show me > > VDSM FQDN command GetVmsNamesFromExternalProvider failed: Unable to connect to server at 'IP:16509' Connection Refused your libvirt is not configured for TCP access > > For ssh I run > > sudo -u vdsm ssh-keygen > But i received Permision Denied. please paste exactly what you did > How can I resolve this issue > > > Thanks for your help > > Sebastian > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users From vincent at epicenergy.ca Wed Apr 11 17:35:48 2018 From: vincent at epicenergy.ca (Vincent Royer) Date: Wed, 11 Apr 2018 10:35:48 -0700 Subject: [ovirt-users] Node health bad after power outage In-Reply-To: References: Message-ID: Software Version:4.2.2.6-1.el7.centos Nodes are still on 4.2 because I can't seem to upgrade them (not getting any replies to my other thread about this) *Vincent Royer* *778-825-1057* *SUSTAINABLE MOBILE ENERGY SOLUTIONS* On Tue, Apr 10, 2018 at 10:42 PM, Ido Rosenzwig wrote: > What version of Hosted-Engine are you running ? > > On Wed, Apr 11, 2018 at 2:40 AM, Vincent Royer > wrote: > >> These mounts: >> >> >> >> After the power failure, these mounts were missing on one of my nodes. I >> added them back using the + button, rebooted, and then the engine started >> back up. >> >> >> *Vincent Royer* >> *778-825-1057* >> >> >> >> *SUSTAINABLE MOBILE ENERGY SOLUTIONS* >> >> >> >> >> On Tue, Apr 10, 2018 at 1:13 AM, Ido Rosenzwig >> wrote: >> >>> Dear Vincent, >>> >>> Can you please explain what you did by 're-entering the mounts using >>> cockpit' and why you did it? >>> >>> Best regards, >>> Ido Rosenzwig >>> >>> >>> >>> On Mon, Apr 9, 2018 at 6:48 PM, Vincent Royer >>> wrote: >>> >>>> Does anyone have any clues about these errors? >>>> >>>> >>>> >>>> >>>> On Sat, Apr 7, 2018 at 9:02 PM, Vincent Royer >>>> wrote: >>>> >>>>> Suffered a long power outage that outlasted our huge UPS, so both my >>>>> nodes went down. >>>>> >>>>> Upon return, the nodes came back up but engine did not start because >>>>> the storage server takes longer to boot than the nodes do, so the NFS >>>>> mounts didn't reconnect. >>>>> >>>>> I manually re-entered the mounts using cockpit, rebooted the nodes and >>>>> the engine came back up along with all VMs. >>>>> >>>>> Now in cockpit under Node Status, It says Health: bad, and these >>>>> messages: >>>>> >>>>> >>>>> Everything seems to be working fine though. >>>>> >>>>> >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users at ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 19079 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 25958 bytes Desc: not available URL: From rightkicktech at gmail.com Wed Apr 11 18:43:02 2018 From: rightkicktech at gmail.com (Alex K) Date: Wed, 11 Apr 2018 18:43:02 +0000 Subject: [ovirt-users] ovirt snapshot issue In-Reply-To: References: Message-ID: Interestingly enough this happens only to a Windows VM with two disks (60GB, 500GB). This is reproducible every time a snapshot is taken. If I snapshot only one disk, regardless if it is the small or the big one, the snapshot completes fairly quickly and the VM is not rendered unresponsive. Seems to be a race issue with libvirtd. Alex On Wed, Apr 11, 2018 at 6:57 PM, Alex K wrote: > Thanx Yaniv, > > I will try to follow your advice. > > Alex > > On Tue, Apr 3, 2018 at 8:54 PM, Yaniv Kaul wrote: > >> >> >> On Sun, Apr 1, 2018 at 9:04 PM, Alex K wrote: >> >>> Checking further the logs I see this error given from libvirt of the >>> host that has the guest VM running: >>> >>> Apr 1 17:53:41 v0 libvirtd: 2018-04-01 17:53:41.298+0000: 1862: warning >>> : qemuDomainObjBeginJobInternal:3847 : Cannot start job (query, none) for >>> domain Data-Server; current job is (async nested, snapshot) owned by (1863 >>> remoteDispatchDomainSnapshotCreateXML, 1863 >>> remoteDispatchDomainSnapshotCreateXML) for (39s, 41s) >>> Apr 1 17:53:41 v0 libvirtd: 2018-04-01 17:53:41.299+0000: 1862: error : >>> qemuDomainObjBeginJobInternal:3859 : Timed out during operation: cannot >>> acquire state change lock (held by remoteDispatchDomainSnapshotCreateXML) >>> Apr 1 17:53:57 v0 journal: vdsm Executor WARN Worker blocked: >> name=jsonrpc/3 running >> u'vmID': u'6bdb3d02-cc33-4019-97cd-7447aecc1e02', u'snapDrives': >>> [{u'baseVolumeID': u'adfabed5-451b-4f46-b22a-45f720b06110', u'domainID': >>> u'2c4b8d45-3d05-4619-9a36-1ecd199d3056', u'volumeID': >>> u'cc0d0772-924c-46db-8ad6-a2b0897c313f', u'imageID': >>> u'7eeadedc-f247-4a31-840d-4de622bf3541'}, {u'baseVolumeID': >>> u'0d960c12-3bcf-4918-896d-bd8e68b5278b', u'domainID': >>> u'2c4b8d45-3d05-4619-9a36-1ecd199d3056', u'volumeID': >>> u'590a6bdd-a9e2-444e-87bc-721c5f8586eb', u'imageID': >>> u'da0e4111-6bbe-43cb-bf59-db5fbf5c3e38'}]}, 'jsonrpc': '2.0', 'method': >>> u'VM.snapshot', 'id': u'be7912e6-ba3d-4357-8ba1-abe40825acf1'} at >>> 0x3bf84d0> timeout=60, duration=60 at 0x3bf8050> task#=416 at 0x20d7f90> >>> >>> >>> Immediately after above the engine reports the VM as unresponsive. >>> >> >> If it's reproducible, it'd be great if you could: >> 1. Run libvirt with debug logs >> 2. Get a dump of libvirt when this happens (with gstack for example). >> 3. File a bug on libvirt. >> >> Thanks, >> Y. >> >> >>> The SPM host does not log any issues. >>> >>> In the same time, the 3 hosts are fairly idle with only one running >>> guest VM. The gluster traffic is dedicated to a separate Gbit NIC of the >>> servers (dedicated VLAN) while the management network is on a separate >>> network. The gluster traffic does not exceed 40 Mbps during the snapshot >>> operation. Can't understand why libvirt is logging timeout. >>> >>> Alex >>> >>> On Thu, Mar 29, 2018 at 9:42 PM, Alex K wrote: >>> >>>> Any idea with this issue? >>>> I am still trying to understand what may be causing this issue. >>>> >>>> Many thanx for any assistance. >>>> >>>> Alex >>>> >>>> On Wed, Mar 28, 2018 at 10:06 AM, Yedidyah Bar David >>>> wrote: >>>> >>>>> On Tue, Mar 27, 2018 at 3:38 PM, Sandro Bonazzola >>>> > wrote: >>>>> >>>>>> >>>>>> >>>>>> 2018-03-27 14:34 GMT+02:00 Alex K : >>>>>> >>>>>>> Hi All, >>>>>>> >>>>>>> Any idea on the below? >>>>>>> >>>>>>> I am using oVirt Guest Tools 4.2-1.el7.centos for the VM. >>>>>>> The Window 2016 server VM (which it the one with the relatively big >>>>>>> disks: 500 GB) it is consistently rendered unresponsive when trying to get >>>>>>> a snapshot. >>>>>>> I amy provide any other additional logs if needed. >>>>>>> >>>>>> >>>>>> Adding some people to the thread >>>>>> >>>>> >>>>> Adding more people for this part. >>>>> >>>>> >>>>>> >>>>>> >>>>>> >>>>>>> >>>>>>> Alex >>>>>>> >>>>>>> On Sun, Mar 25, 2018 at 7:30 PM, Alex K >>>>>>> wrote: >>>>>>> >>>>>>>> Hi folks, >>>>>>>> >>>>>>>> I am facing frequently the following issue: >>>>>>>> >>>>>>>> On some large VMs (Windows 2016 with two disk drives, 60GB and >>>>>>>> 500GB) when attempting to create a snapshot of the VM, the VM becomes >>>>>>>> unresponsive. >>>>>>>> >>>>>>>> The errors that I managed to collect were: >>>>>>>> >>>>>>>> vdsm error at host hosting the VM: >>>>>>>> 2018-03-25 14:40:13,442+0000 WARN (vdsm.Scheduler) [Executor] >>>>>>>> Worker blocked: >>>>>>> {'params': {u'frozen': False, u'vmID': >>>>>>>> u'a5c761a2-41cd-40c2-b65f-f3819293e8a4', u'snapDrives': [{u'baseVolumeID': >>>>>>>> u'2a33e585-ece8-4f4d-b45d-5ecc9239200e', u'domainID': >>>>>>>> u'888e3aae-f49f-42f7-a7fa-76700befabea', u'volumeID': >>>>>>>> u'e9a01ebd-83dd-40c3-8c83-5302b0d15e04', u'imageID': >>>>>>>> u'c75b8e93-3067-4472-bf24-dafada224e4d'}, {u'baseVolumeID': >>>>>>>> u'3fb2278c-1b0d-4677-a529-99084e4b08af', u'domainID': >>>>>>>> u'888e3aae-f49f-42f7-a7fa-76700befabea', u'volumeID': >>>>>>>> u'78e6b6b1-2406-4393-8d92-831a6d4f1337', u'imageID': >>>>>>>> u'd4223744-bf5d-427b-bec2-f14b9bc2ef81'}]}, 'jsonrpc': '2.0', 'method': >>>>>>>> u'VM.snapshot', 'id': u'89555c87-9701-4260-9952-789965261e65'} at >>>>>>>> 0x7fca4004cc90> timeout=60, duration=60 at 0x39d8210> task#=155842 at >>>>>>>> 0x2240e10> (executor:351) >>>>>>>> 2018-03-25 14:40:15,261+0000 INFO (jsonrpc/3) >>>>>>>> [jsonrpc.JsonRpcServer] RPC call VM.getStats failed (error 1) in 0.01 >>>>>>>> seconds (__init__:539) >>>>>>>> 2018-03-25 14:40:17,471+0000 WARN (jsonrpc/5) [virt.vm] >>>>>>>> (vmId='a5c761a2-41cd-40c2-b65f-f3819293e8a4') monitor became unresponsive >>>>>>>> (command timeout, age=67.9100000001) (vm:5132) >>>>>>>> >>>>>>>> engine.log: >>>>>>>> 2018-03-25 14:40:19,875Z WARN >>>>>>>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >>>>>>>> (DefaultQuartzScheduler2) [1d737df7] EVENT_ID: VM_NOT_RESPONDING(126), >>>>>>>> Correlation ID: null, Call Stack: null, Custom ID: null, Custom Event ID: >>>>>>>> -1, Message: VM Data-Server is not responding. >>>>>>>> >>>>>>>> 2018-03-25 14:42:13,708Z ERROR >>>>>>>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >>>>>>>> (DefaultQuartzScheduler5) [17789048-009a-454b-b8ad-2c72c7cd37aa] EVENT_ID: >>>>>>>> VDS_BROKER_COMMAND_FAILURE(10,802), Correlation ID: null, Call Stack: null, >>>>>>>> Custom ID: null, Custom Event ID: -1, Message: VDSM v1.cluster command >>>>>>>> SnapshotVDS failed: Message timeout which can be caused by communication >>>>>>>> issues >>>>>>>> 2018-03-25 14:42:13,708Z ERROR >>>>>>>> [org.ovirt.engine.core.vdsbroker.vdsbroker.SnapshotVDSCommand] >>>>>>>> (DefaultQuartzScheduler5) [17789048-009a-454b-b8ad-2c72c7cd37aa] Command >>>>>>>> 'SnapshotVDSCommand(HostName = v1.cluster, >>>>>>>> SnapshotVDSCommandParameters:{runAsync='true', >>>>>>>> hostId='a713d988-ee03-4ff0-a0cd-dc4cde1507f4', >>>>>>>> vmId='a5c761a2-41cd-40c2-b65f-f3819293e8a4'})' execution failed: >>>>>>>> VDSGenericException: VDSNetworkException: Message timeout which can be >>>>>>>> caused by communication issues >>>>>>>> 2018-03-25 14:42:13,708Z WARN >>>>>>>> [org.ovirt.engine.core.bll.snapshots.CreateAllSnapshotsFromVmCommand] >>>>>>>> (DefaultQuartzScheduler5) [17789048-009a-454b-b8ad-2c72c7cd37aa] Could not >>>>>>>> perform live snapshot due to error, VM will still be configured to the new >>>>>>>> created snapshot: EngineException: >>>>>>>> org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: >>>>>>>> VDSGenericException: VDSNetworkException: Message timeout which can be >>>>>>>> caused by communication issues (Failed with error VDS_NETWORK_ERROR and >>>>>>>> code 5022) >>>>>>>> 2018-03-25 14:42:13,708Z WARN >>>>>>>> [org.ovirt.engine.core.vdsbroker.VdsManager] >>>>>>>> (org.ovirt.thread.pool-6-thread-15) [17789048-009a-454b-b8ad-2c72c7cd37aa] >>>>>>>> Host 'v1.cluster' is not responding. It will stay in Connecting state for a >>>>>>>> grace period of 61 seconds and after that an attempt to fence the host will >>>>>>>> be issued. >>>>>>>> 2018-03-25 14:42:13,725Z WARN >>>>>>>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >>>>>>>> (org.ovirt.thread.pool-6-thread-15) [17789048-009a-454b-b8ad-2c72c7cd37aa] >>>>>>>> EVENT_ID: VDS_HOST_NOT_RESPONDING_CONNECTING(9,008), Correlation ID: null, >>>>>>>> Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: Host >>>>>>>> v1.cluster is not responding. It will stay in Connecting state for a grace >>>>>>>> period of 61 seconds and after that an attempt to fence the host will be >>>>>>>> issued. >>>>>>>> 2018-03-25 14:42:13,751Z WARN >>>>>>>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >>>>>>>> (DefaultQuartzScheduler5) [17789048-009a-454b-b8ad-2c72c7cd37aa] EVENT_ID: >>>>>>>> USER_CREATE_LIVE_SNAPSHOT_FINISHED_FAILURE(170), Correlation ID: >>>>>>>> 17789048-009a-454b-b8ad-2c72c7cd37aa, Job ID: >>>>>>>> 16e48c28-a8c7-4841-bd81-1f2d370f345d, Call Stack: >>>>>>>> org.ovirt.engine.core.common.errors.EngineException: EngineException: >>>>>>>> org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: >>>>>>>> VDSGenericException: VDSNetworkException: Message timeout which can be >>>>>>>> caused by communication issues (Failed with error VDS_NETWORK_ERROR and >>>>>>>> code 5022) >>>>>>>> 2018-03-25 14:42:14,372Z ERROR >>>>>>>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >>>>>>>> (DefaultQuartzScheduler5) [] EVENT_ID: >>>>>>>> USER_CREATE_SNAPSHOT_FINISHED_FAILURE(69), Correlation ID: >>>>>>>> 17789048-009a-454b-b8ad-2c72c7cd37aa, Job ID: >>>>>>>> 16e48c28-a8c7-4841-bd81-1f2d370f345d, Call Stack: >>>>>>>> org.ovirt.engine.core.common.errors.EngineException: EngineException: >>>>>>>> org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: >>>>>>>> VDSGenericException: VDSNetworkException: Message timeout which can be >>>>>>>> caused by communication issues (Failed with error VDS_NETWORK_ERROR and >>>>>>>> code 5022) >>>>>>>> 2018-03-25 14:42:14,372Z WARN >>>>>>>> [org.ovirt.engine.core.bll.ConcurrentChildCommandsExecutionCallback] >>>>>>>> (DefaultQuartzScheduler5) [] Command 'CreateAllSnapshotsFromVm' id: >>>>>>>> 'bad4f5be-5306-413f-a86a-513b3cfd3c66' end method execution failed, as the >>>>>>>> command isn't marked for endAction() retries silently ignoring >>>>>>>> 2018-03-25 14:42:15,951Z WARN >>>>>>>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >>>>>>>> (DefaultQuartzScheduler5) [5017c163] EVENT_ID: >>>>>>>> VDS_NO_SELINUX_ENFORCEMENT(25), Correlation ID: null, Call Stack: null, >>>>>>>> Custom ID: null, Custom Event ID: -1, Message: Host v1.cluster does not >>>>>>>> enforce SELinux. Current status: DISABLED >>>>>>>> 2018-03-25 14:42:15,951Z WARN >>>>>>>> [org.ovirt.engine.core.vdsbroker.VdsManager] (DefaultQuartzScheduler5) >>>>>>>> [5017c163] Host 'v1.cluster' is running with SELinux in 'DISABLED' mode >>>>>>>> >>>>>>>> As soon as the VM is unresponsive, the VM console that was already >>>>>>>> open freezes. I can resume the VM only by powering off and on. >>>>>>>> >>>>>>>> I am using ovirt 4.1.9 with 3 nodes and self-hosted engine. I am >>>>>>>> running mostly Windows 10 and Windows 2016 server VMs. I have installed >>>>>>>> latest guest agents from: >>>>>>>> >>>>>>>> >>>>>>>> http://resources.ovirt.org/pub/ovirt-4.2/iso/oVirt-toolsSetup/4.2-1.el7.centos/ >>>>>>>> >>>>>>>> At the screen where one takes a snapshot I get a warning saying >>>>>>>> "Could not detect guest agent on the VM. Note that without guest agent the >>>>>>>> data on the created snapshot may be inconsistent". See attached. I have >>>>>>>> verified that ovirt guest tools are installed and shown at installed apps >>>>>>>> at engine GUI. Also Ovirt Guest Agent (32 bit) and qemu-ga are listed as >>>>>>>> running at the windows tasks manager. Shouldn't ovirt guest agent be 64 bit >>>>>>>> on Windows 64 bit? >>>>>>>> >>>>>>> >>>>> No idea, but I do not think it's related to your problem of freezing >>>>> while taking a snapshot. >>>>> >>>>> This error was already discussed in the past, see e.g.: >>>>> >>>>> http://lists.ovirt.org/pipermail/users/2017-June/082577.html >>>>> >>>>> Best regards, >>>>> -- >>>>> Didi >>>>> >>>> >>>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From antunez.sebastian at gmail.com Wed Apr 11 18:46:38 2018 From: antunez.sebastian at gmail.com (Sebastian Antunez N.) Date: Wed, 11 Apr 2018 15:46:38 -0300 Subject: [ovirt-users] Error V2V In-Reply-To: <621B3343-D85B-4236-8DB3-C59475AA849F@redhat.com> References: <621B3343-D85B-4236-8DB3-C59475AA849F@redhat.com> Message-ID: Hello This error when is generated the keygen sudo -u vdsm ssh-keygen Generating public/private rsa key pair. Enter file in which to save the key (//.ssh/id_rsa): Could not create directory '//.ssh': Permission denied Regards SAN 2018-04-11 14:19 GMT-03:00 Michal Skrivanek : > > > > On 11 Apr 2018, at 18:07, Sebastian Antunez N. < > antunez.sebastian at gmail.com> wrote: > > > > Hello Guys > > > > I have two servers with ovirt 4.1 and I need to make v2v from KVM to > Ovirt. > > > > When add the new External Provider show me the following error in > qemu+ssh://root at IP/system > > > > VDSM FQDN command GetVmsNamesFromExternalProvider failed: Cannot recv > data: Host Key verification failed. Connection reset by peer > > > > Now when add with tcp show me > > > > VDSM FQDN command GetVmsNamesFromExternalProvider failed: Unable to > connect to server at 'IP:16509' Connection Refused > > your libvirt is not configured for TCP access > > > > > For ssh I run > > > > sudo -u vdsm ssh-keygen > > But i received Permision Denied. > > please paste exactly what you did > > How can I resolve this issue > > > > > > Thanks for your help > > > > Sebastian > > _______________________________________________ > > Users mailing list > > Users at ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From antunez.sebastian at gmail.com Wed Apr 11 19:36:00 2018 From: antunez.sebastian at gmail.com (Sebastian Antunez N.) Date: Wed, 11 Apr 2018 16:36:00 -0300 Subject: [ovirt-users] Error V2V In-Reply-To: References: <621B3343-D85B-4236-8DB3-C59475AA849F@redhat.com> Message-ID: Hello I open the port in both nodes (KVM and Ovirt) now show the following message error: failed to connect to the hypervisor error: authentication failed: Failed to start SASL negotiation: -4 (SASL(-4): no mechanism available: No worthy mechs found) Thanks for your help Regards 2018-04-11 15:46 GMT-03:00 Sebastian Antunez N. : > Hello > > This error when is generated the keygen > > sudo -u vdsm ssh-keygen > Generating public/private rsa key pair. > Enter file in which to save the key (//.ssh/id_rsa): > Could not create directory '//.ssh': Permission denied > > Regards > > SAN > > > 2018-04-11 14:19 GMT-03:00 Michal Skrivanek : > >> >> >> > On 11 Apr 2018, at 18:07, Sebastian Antunez N. < >> antunez.sebastian at gmail.com> wrote: >> > >> > Hello Guys >> > >> > I have two servers with ovirt 4.1 and I need to make v2v from KVM to >> Ovirt. >> > >> > When add the new External Provider show me the following error in >> qemu+ssh://root at IP/system >> > >> > VDSM FQDN command GetVmsNamesFromExternalProvider failed: Cannot recv >> data: Host Key verification failed. Connection reset by peer >> > >> > Now when add with tcp show me >> > >> > VDSM FQDN command GetVmsNamesFromExternalProvider failed: Unable to >> connect to server at 'IP:16509' Connection Refused >> >> your libvirt is not configured for TCP access >> >> > >> > For ssh I run >> > >> > sudo -u vdsm ssh-keygen >> > But i received Permision Denied. >> >> please paste exactly what you did >> > How can I resolve this issue >> > >> > >> > Thanks for your help >> > >> > Sebastian >> > _______________________________________________ >> > Users mailing list >> > Users at ovirt.org >> > http://lists.ovirt.org/mailman/listinfo/users >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jtqn42 at gmail.com Wed Apr 11 19:37:10 2018 From: jtqn42 at gmail.com (John Nguyen) Date: Wed, 11 Apr 2018 15:37:10 -0400 Subject: [ovirt-users] ovirt-guest-agent for EL6 Message-ID: Hi, Is there an OVirt 4.2 compatible version on of the ovirt-guest-agent for EL6? I found the 1.0.13 Package but it doesn't report information to the Web UI. Thanks, John -------------- next part -------------- An HTML attachment was scrubbed... URL: From rightkicktech at gmail.com Wed Apr 11 20:54:45 2018 From: rightkicktech at gmail.com (Alex K) Date: Wed, 11 Apr 2018 23:54:45 +0300 Subject: [ovirt-users] Error V2V In-Reply-To: References: <621B3343-D85B-4236-8DB3-C59475AA849F@redhat.com> Message-ID: Hi Sebastian, In case you would like to use SSH you need to setup SSH keys for vdsm user of at least one of the ovirt hosts in order to SSH from it to the remote KVM host (lets name it kvmhost) as below: 1. Edit temporarily the /etc/passwd of one host of your ovirt cluster. (say node0 for example) and replace /sbin/nologin with /bin/sh for vdsm user as below: vdsm:x:36:36:Node Virtualization Manager:/var/lib/vdsm:/bin/sh 2. Switch to vdsm user and generate SSH keys: su - vdsm ssh-keygen ssh-copy-id root at kvmhost verify that you have passwordless SSH from node0 (ovirt host) to your KVM host restore previous /etc/password (replace /bin/sh with /sbin/nologin for vdsm login shell) 3. Go at ovirt GUI and at VM import use the URI: qemu+ssh://root at kvmhost /system replace kvmhost with your IP and use as proxy host the one that you configured SSH keys (node0 at this example). This should work as for me it is working. In case you login with another user and not root, you may do so as long as the user has proper permissions for libvirt/qemu. For TCP URI you need to enable TCP socket at kvmhost. Alex On Wed, Apr 11, 2018 at 10:36 PM, Sebastian Antunez N. < antunez.sebastian at gmail.com> wrote: > Hello > > I open the port in both nodes (KVM and Ovirt) now show the following > message > > error: failed to connect to the hypervisor > error: authentication failed: Failed to start SASL negotiation: -4 > (SASL(-4): no mechanism available: No worthy mechs found) > > Thanks for your help > > Regards > > 2018-04-11 15:46 GMT-03:00 Sebastian Antunez N. < > antunez.sebastian at gmail.com>: > >> Hello >> >> This error when is generated the keygen >> >> sudo -u vdsm ssh-keygen >> Generating public/private rsa key pair. >> Enter file in which to save the key (//.ssh/id_rsa): >> Could not create directory '//.ssh': Permission denied >> >> Regards >> >> SAN >> >> >> 2018-04-11 14:19 GMT-03:00 Michal Skrivanek >> : >> >>> >>> >>> > On 11 Apr 2018, at 18:07, Sebastian Antunez N. < >>> antunez.sebastian at gmail.com> wrote: >>> > >>> > Hello Guys >>> > >>> > I have two servers with ovirt 4.1 and I need to make v2v from KVM to >>> Ovirt. >>> > >>> > When add the new External Provider show me the following error in >>> qemu+ssh://root at IP/system >>> > >>> > VDSM FQDN command GetVmsNamesFromExternalProvider failed: Cannot recv >>> data: Host Key verification failed. Connection reset by peer >>> > >>> > Now when add with tcp show me >>> > >>> > VDSM FQDN command GetVmsNamesFromExternalProvider failed: Unable to >>> connect to server at 'IP:16509' Connection Refused >>> >>> your libvirt is not configured for TCP access >>> >>> > >>> > For ssh I run >>> > >>> > sudo -u vdsm ssh-keygen >>> > But i received Permision Denied. >>> >>> please paste exactly what you did >>> > How can I resolve this issue >>> > >>> > >>> > Thanks for your help >>> > >>> > Sebastian >>> > _______________________________________________ >>> > Users mailing list >>> > Users at ovirt.org >>> > http://lists.ovirt.org/mailman/listinfo/users >>> >>> >> > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dhy336 at sina.com Thu Apr 12 01:12:44 2018 From: dhy336 at sina.com (dhy336 at sina.com) Date: Thu, 12 Apr 2018 09:12:44 +0800 Subject: [ovirt-users] How to build ovirt-engine-appliance-xxx.rpm Message-ID: <20180412011244.BD4C77200CF@webmail.sinamail.sina.com.cn> Hi How to build ovirt-engine-appliance-xxx.rpm, I do not find docs and source now I hava build ovirt-engine-appliance.ova by ovirt-appliance. someone give me some advise? thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: From didi at redhat.com Thu Apr 12 07:17:34 2018 From: didi at redhat.com (Yedidyah Bar David) Date: Thu, 12 Apr 2018 10:17:34 +0300 Subject: [ovirt-users] How to build ovirt-engine-appliance-xxx.rpm In-Reply-To: <20180412011244.BD4C77200CF@webmail.sinamail.sina.com.cn> References: <20180412011244.BD4C77200CF@webmail.sinamail.sina.com.cn> Message-ID: On Thu, Apr 12, 2018 at 4:12 AM, wrote: > Hi > How to build ovirt-engine-appliance-xxx.rpm, I do not find docs and source > now I hava build ovirt-engine-appliance.ova by ovirt-appliance. Check the automation/ directory inside the ovirt-appliance git repo. This is how it's done in CI. You can see the results e.g. here: http://jenkins.ovirt.org/job/ovirt-appliance_master_build-artifacts-el7-x86_64/lastSuccessfulBuild/artifact/ > > someone give me some advise? > > thanks > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -- Didi From marcel.kaefer at putzbrunn.de Thu Apr 12 07:22:34 2018 From: marcel.kaefer at putzbrunn.de (=?iso-8859-1?Q?K=E4fer_Marcel?=) Date: Thu, 12 Apr 2018 07:22:34 +0000 Subject: [ovirt-users] admin account constantly gets locked Message-ID: <9936BF6BA7EAF843AAB3A4ECC0FBB3ABE7DD48@ExchangePBR.GemPbr.local> Hello, a few days ago I installed an ovirt-engine 4.2.2.6 following the steps of the documentation. After the installation I logged in to the admin page, configured a datadomain and changed the admin password. After a few hours I tried to login again, using the new password and got "Unable to log in because the user account is disabled or locked. Contact the system administrator." So I unlocked the admin account from the shell using "ovirt-aaa-jdbc-tool user unlock admin" which worked fine and I was able to continue working till the next login. I traced the /var/log/ovirt-engine/engine.log and found this after unlocking the admin account again. 2018-04-12 09:06:19,984+02 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) [2ed5aa42] Lock Acquired to object 'EngineLock:{exclusiveLocks='[e37c0b9e-09bc-4893-9b0c-c70f56d6ecfc=PROVIDER]', sharedLocks=''}' 2018-04-12 09:06:19,991+02 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) [2ed5aa42] Running command: SyncNetworkProviderCommand internal: true. 2018-04-12 09:06:20,102+02 INFO [org.ovirt.engine.extension.aaa.jdbc.core.Authentication] (default task-239) [] locking user: admin due to interval failures 2018-04-12 09:06:25,046+02 ERROR [org.ovirt.engine.core.sso.utils.SsoUtils] (default task-239) [] OAuthException access_denied: Cannot authenticate user 'admin at internal': The username or password is incorrect.. 2018-04-12 09:06:25,049+02 ERROR [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) [2ed5aa42] Command 'org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand' failed: EngineException: (Failed with error Unauthorized and code 5050) 2018-04-12 09:06:25,050+02 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) [2ed5aa42] Lock freed to object 'EngineLock:{exclusiveLocks='[e37c0b9e-09bc-4893-9b0c-c70f56d6ecfc=PROVIDER]', sharedLocks=''}' It seems like the SyncNetworkProviderCommand is somehow locking the admin account. I already restarted the whole machine but it didn't help. Can someone please point me in the right direction, where to find the error? Thanks in advance -------------- next part -------------- An HTML attachment was scrubbed... URL: From omachace at redhat.com Thu Apr 12 07:43:53 2018 From: omachace at redhat.com (Ondra Machacek) Date: Thu, 12 Apr 2018 09:43:53 +0200 Subject: [ovirt-users] Some questions about Ovirt REST API In-Reply-To: <2018041114193731867221@pku.edu.cn> References: <2018041114193731867221@pku.edu.cn> Message-ID: <4d18e637-e8a3-1cff-d24a-c89ef623a29d@redhat.com> On 04/11/2018 08:19 AM, gsswzt at pku.edu.cn wrote: > Hi, > > I wants to creating my own service under ../vms/{vmid}/myservice.Here is > my methods: > > 1. create VmMytestService in > /https://github.com/oVirt/ovirt-engine-api-model project./ > add/@Service VmMytestService mytests() in /VmService .java > 2. mvn install it and change the root pom.xml > /4.3.9-SNAPSHOT /?in my Ovirt project. > 3.create BackendVmMytestService implements VmMytestResource Did you also in BackendVmResource implemented 'mytests' method? > 4.override /get() and add() /methods. > > After that, I use /curl/? tool to send GET and POST request. GET is > working and return. > However, I get this return after POST request. > > Would you help me with that issue? > > Thanks, > wenzt > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > From bkorren at redhat.com Thu Apr 12 07:58:13 2018 From: bkorren at redhat.com (Barak Korren) Date: Thu, 12 Apr 2018 10:58:13 +0300 Subject: [ovirt-users] How to build ovirt-engine-appliance-xxx.rpm In-Reply-To: References: <20180412011244.BD4C77200CF@webmail.sinamail.sina.com.cn> Message-ID: On 12 April 2018 at 10:17, Yedidyah Bar David wrote: > On Thu, Apr 12, 2018 at 4:12 AM, wrote: >> Hi >> How to build ovirt-engine-appliance-xxx.rpm, I do not find docs and source >> now I hava build ovirt-engine-appliance.ova by ovirt-appliance. > > Check the automation/ directory inside the ovirt-appliance git repo. > This is how it's done in CI. > You can see the results e.g. here: > > http://jenkins.ovirt.org/job/ovirt-appliance_master_build-artifacts-el7-x86_64/lastSuccessfulBuild/artifact/ > >> >> someone give me some advise? >> You can also use the `mock_runner.sh` tool [1] to emulate what the CI does locally. This would work for any oVirt project. [1]: http://ovirt-infra-docs.readthedocs.io/en/latest/CI/Using_mock_runner/index.html -- Barak Korren RHV DevOps team , RHCE, RHCi Red Hat EMEA redhat.com | TRIED. TESTED. TRUSTED. | redhat.com/trusted From gsswzt at pku.edu.cn Thu Apr 12 08:14:16 2018 From: gsswzt at pku.edu.cn (gsswzt at pku.edu.cn) Date: Thu, 12 Apr 2018 16:14:16 +0800 Subject: [ovirt-users] Some questions about Ovirt REST API References: <2018041114193731867221@pku.edu.cn>, <4d18e637-e8a3-1cff-d24a-c89ef623a29d@redhat.com> Message-ID: <2018041216141602964044@pku.edu.cn> Do you mean @override getMytestsResource() in BackendVmResource ? I have done that, otherwise GET would not pass. From: Ondra Machacek Date: 2018-04-12 15:43 To: gsswzt at pku.edu.cn; users Subject: Re: [ovirt-users] Some questions about Ovirt REST API On 04/11/2018 08:19 AM, gsswzt at pku.edu.cn wrote: > Hi, > > I wants to creating my own service under ../vms/{vmid}/myservice.Here is > my methods: > > 1. create VmMytestService in > /https://github.com/oVirt/ovirt-engine-api-model project./ > add/@Service VmMytestService mytests() in /VmService .java > 2. mvn install it and change the root pom.xml > /4.3.9-SNAPSHOT / in my Ovirt project. > 3.create BackendVmMytestService implements VmMytestResource Did you also in BackendVmResource implemented 'mytests' method? > 4.override /get() and add() /methods. > > After that, I use /curl/ tool to send GET and POST request. GET is > working and return. > However, I get this return after POST request. > > Would you help me with that issue? > > Thanks, > wenzt > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Catch9731.jpg Type: image/jpeg Size: 89853 bytes Desc: not available URL: From omachace at redhat.com Thu Apr 12 08:25:51 2018 From: omachace at redhat.com (Ondra Machacek) Date: Thu, 12 Apr 2018 10:25:51 +0200 Subject: [ovirt-users] Some questions about Ovirt REST API In-Reply-To: <2018041216141602964044@pku.edu.cn> References: <2018041114193731867221@pku.edu.cn> <4d18e637-e8a3-1cff-d24a-c89ef623a29d@redhat.com> <2018041216141602964044@pku.edu.cn> Message-ID: <7691fba8-01ed-6fef-7afc-97a504f2374f@redhat.com> Ah sorry, POST isn't working and GET works, I misread it. Can you please share the generated file: {project_path}/backend/manager/modules/restapi/interface/definition/target/generated-sources/model/org/ovirt/engine/api/resource/VmMytestResource.java Maybe you can even send patches to review as draft for start, we could better understand the patch then. On 04/12/2018 10:14 AM, gsswzt at pku.edu.cn wrote: > Do you mean /@override/ /getMytestsResource() / in BackendVmResource ? > I have done that, otherwise GET would not pass. > > *From:* Ondra Machacek > *Date:*?2018-04-12?15:43 > *To:* gsswzt at pku.edu.cn ; users > > *Subject:*?Re: [ovirt-users] Some questions about Ovirt REST API > On 04/11/2018 08:19 AM, gsswzt at pku.edu.cn wrote: > > Hi, > > > > I wants to creating my own service under > ../vms/{vmid}/myservice.Here is > > my methods: > > > > 1. create VmMytestService in > > /https://github.com/oVirt/ovirt-engine-api-model project./ > > add/@Service VmMytestService mytests() in /VmService .java > > 2. mvn install it and change the root pom.xml > > /4.3.9-SNAPSHOT /?in my Ovirt project. > > 3.create BackendVmMytestService implements VmMytestResource > Did you also in BackendVmResource implemented 'mytests' method? > > 4.override /get() and add() /methods. > > > > After that, I use /curl/? tool to send GET and POST request. GET is > > working and return. > > However, I get this return after POST request. > > > > Would you help me with that issue? > > > > Thanks, > > wenzt > > > > > > _______________________________________________ > > Users mailing list > > Users at ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > From phudec at cnc.sk Thu Apr 12 08:32:01 2018 From: phudec at cnc.sk (Peter Hudec) Date: Thu, 12 Apr 2018 10:32:01 +0200 Subject: [ovirt-users] Engine reports In-Reply-To: <31bf3237-ab58-dcf3-8ce8-38dc9348dcc5@redhat.com> References: <855bb1c1-33c7-d6ec-f513-5702bc2f736c@redhat.com> <4e975c4c-8492-c2c0-4649-75e1bf8a3163@redhat.com> <70243db2-b0e4-55f6-eef9-43a9f5f16c29@cnc.sk> <3be957c0-3667-cb3c-eb6a-d3e06600b597@redhat.com> <31bf3237-ab58-dcf3-8ce8-38dc9348dcc5@redhat.com> Message-ID: <52546f65-87b8-ac5c-93e4-8ce8ba08878e@cnc.sk> back to this issue. something went wrong ;( The status command got error. I'm not familiar with openshift, so the log processing will took me a while. [PROD] root at dipostat01.cnc.sk: ~ # oc project logging Already on project "logging" on server "https://metrics.ovirt.cnc.sk:8443". [PROD] root at dipostat01.cnc.sk: ~ # oc adm policy add-scc-to-user hostmount-anyuid \ > system:serviceaccount:logging:aggregated-logging-elasticsearch scc "hostmount-anyuid" added to: ["system:serviceaccount:logging:aggregated-logging-elasticsearch"] [PROD] root at dipostat01.cnc.sk: ~ # oc rollout cancel $( oc get -n logging dc -l component=es -o name ) No rollout is in progress (latest rollout #2 failed 3 days ago) [PROD] root at dipostat01.cnc.sk: ~ # oc rollout latest $( oc get -n logging dc -l component=es -o name ) deploymentconfig "logging-es-data-master-z6zbv4v2" rolled out [PROD] root at dipostat01.cnc.sk: ~ # oc rollout status -w $( oc get -n logging dc -l component=es -o name ) Waiting for rollout to finish: 0 of 1 updated replicas are available... error: replication controller "logging-es-data-master-z6zbv4v2-3" has failed progressing [PROD] root at dipostat01.cnc.sk: ~ # oc get pods NAME READY STATUS RESTARTS AGE logging-curator-1-c894f 1/1 Running 904 5d logging-es-data-master-z6zbv4v2-2-deploy 0/1 Error 0 3d logging-fluentd-x9vzs 1/1 Running 1 5d logging-kibana-1-6bvvw 2/2 Running 2 5d logging-mux-1-xxmdj 1/1 Running 1 5d [PROD] root at dipostat01.cnc.sk: ~ # oc get pods NAME READY STATUS RESTARTS AGE logging-curator-1-c894f 1/1 Running 904 5d logging-es-data-master-z6zbv4v2-2-deploy 0/1 Error 0 3d logging-fluentd-x9vzs 1/1 Running 1 5d logging-kibana-1-6bvvw 2/2 Running 2 5d logging-mux-1-xxmdj 1/1 Running 1 5d [PROD] root at dipostat01.cnc.sk: ~ # oc get pods NAME READY STATUS RESTARTS AGE logging-curator-1-c894f 1/1 Running 904 5d logging-es-data-master-z6zbv4v2-2-deploy 0/1 Error 0 3d logging-fluentd-x9vzs 1/1 Running 1 5d logging-kibana-1-6bvvw 2/2 Running 2 5d logging-mux-1-xxmdj 1/1 Running 1 5d [PROD] root at dipostat01.cnc.sk: ~ # oc get svc NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE logging-es ClusterIP 172.30.249.174 9200/TCP 5d logging-es-cluster ClusterIP 172.30.114.201 9300/TCP 5d logging-es-prometheus ClusterIP 172.30.203.113 443/TCP 5d logging-kibana ClusterIP 172.30.29.192 443/TCP 5d logging-mux ClusterIP 172.30.170.158 192.168.16.17 24284/TCP 5d On 07/04/2018 01:09, Rich Megginson wrote: > Great! > > On 04/06/2018 04:43 PM, Peter Hudec wrote: >> Ansible playbook finished OK. The next step after weekend. >> >> ????thanks >> ??????? Peter >> >> On 06/04/2018 23:34, Rich Megginson wrote: >>> On 04/06/2018 03:08 PM, Peter Hudec wrote: >>>> Hi, >>>> >>>> https://tools.apps.hudecof.net/paste/view/1d493d52 >>>> >>>> The difference is >>>> - I used latest ansible 2.5 from PIPY source, since the RPM package do >>>> not fit requirements >>>> - I used GIT repo for openshift-ansible. >>>> >>>> I could start it over with the RPM based openshift-ansible >>> I recommend that you start over with the RPM based openshift-ansible, >>> which is what the instructions say, which is what I have tested >>> >>> alternately - if you want to go the more experimental route, you could >>> enable the epel-testing yum repo - ansible-2.5 is in epel-testing which >>> I've been told by the openshift-ansible guys should work >>> >>>> ?????Peter >>>> >>>> On 06/04/2018 20:23, Rich Megginson wrote: >>>>> I'm assuming you are running on a CentOS7 machine, recently updated to >>>>> the latest base packages. Please confirm. >>>>> >>>>> Please provide the output of the following commands: >>>>> >>>>> sudo yum repolist >>>>> >>>>> sudo rpm -q ansible >>>>> >>>>> sudo yum repoquery -i ansible >>>>> >>>>> sudo rpm -q openshift-ansible >>>>> >>>>> sudo yum repoquery -i openshift-ansible >>>>> >>>>> sudo rpm -q origin >>>>> >>>>> sudo yum repoquery -i origin >>>>> >>>>> sudo cat >>>>> /usr/share/ansible/openshift-ansible/roles/lib_utils/callback_plugins/aa_version_requirement.py >>>>> >>>>> >>>>> >>>>> >>>>> sudo ls -alrtF /etc/origin/logging >>>>> >>>>> Please confirm that you followed the steps listed in the link below, >>>>> including the use of the ansible inventory, vars.yaml.template, and >>>>> repo >>>>> files: >>>>> https://github.com/richm/Main/blob/7e663351dc371b7895564072c7656ebfda45068d/README-install.md >>>>> >>>>> >>>>> >>>>> >>>>> On 04/06/2018 03:19 AM, Peter Hudec wrote: >>>>>> first issue is ansible version, could be solved by virtual env >>>>>> >>>>>> FATAL: Current Ansible version (2.4.2.0) is not supported. Supported >>>>>> versions: 2.4.3.0 or newer >>>>>> >>>>>> yum install -y python-virtualenv >>>>>> virtualenv ansible >>>>>> . ./ansible/bin/activate >>>>>> pip install -U pip setuptolls >>>>>> pip install -U pip setuptools >>>>>> pip install ansible >>>>>> >>>>>> >>>>>> Second issue is a little bit strange for me >>>>>> >>>>>> 2018-04-06 10:00:30,264 p=68226 u=root |? Failure summary: >>>>>> >>>>>> >>>>>> ???? 1. Hosts:??? localhost >>>>>> ??????? Play:???? OpenShift Aggregated Logging >>>>>> ??????? Task:???? pulling down signing items from host >>>>>> ??????? Message:? ESC[0;31mAll items completedESC[0m >>>>>> >>>>>> I have found in logs >>>>>> >>>>>> 2018-04-06 10:00:28,356 p=68226 u=root |? failed: [localhost] >>>>>> (item=ca.crl.srl) => { >>>>>> ?????? "changed": false, >>>>>> ?????? "invocation": { >>>>>> ?????????? "module_args": { >>>>>> ?????????????? "src": "/etc/origin/logging/ca.crl.srl" >>>>>> ?????????? } >>>>>> ?????? }, >>>>>> ?????? "item": "ca.crl.srl", >>>>>> ?????? "msg": "file not found: /etc/origin/logging/ca.crl.srl" >>>>>> >>>>>> >>>>>> Is this good or bad ? >>>>>> >>>>>> ??????Peter >>>>>> >>>>>> On 05/04/2018 16:11, Rich Megginson wrote: >>>>>>> Is it possible that you could start over from scratch, using the >>>>>>> latest >>>>>>> instructions/files at >>>>>>> https://github.com/ViaQ/Main/pull/37/files? >>>>>>> >>>>>>> On 04/05/2018 07:19 AM, Peter Hudec wrote: >>>>>>>> The version is from >>>>>>>> >>>>>>>> /usr/share/ansible/openshift-ansible/roles/openshift_facts/library/openshift_facts.py:get_openshift_version >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> [PROD] root at dipostat01.cnc.sk: >>>>>>>> /usr/share/ansible/openshift-ansible # >>>>>>>> /usr/bin/openshift version >>>>>>>> openshift v3.10.0-alpha.0+f0186dd-401 >>>>>>>> kubernetes v1.9.1+a0ce1bc657 >>>>>>>> etcd 3.2.16 >>>>>>>> >>>>>>>> this binary is from the origin-3.7.2-1.el7.git.0.f0186dd.x86_64 >>>>>>>> package >>>>>>>> >>>>>>>> [PROD] root at dipostat01.cnc.sk: ~ # rpm -qf /usr/bin/openshift >>>>>>>> origin-3.7.2-1.el7.git.0.f0186dd.x86_64 >>>>>>>> >>>>>>>> Hmm, why the version do not match ? >>>>>>>> >>>>>>>> ???????Peter >>>>>>>> >>>>>>>> On 04/04/2018 17:41, Shirly Radco wrote: >>>>>>>>> Hi, >>>>>>>>> >>>>>>>>> >>>>>>>>> I have a updated the installation instructions for installing >>>>>>>>> OpenShift >>>>>>>>> 3.9, based on Rich's work , for the oVirt use case. >>>>>>>>> >>>>>>>>> Please make sure where you get the 3.10 rpm and disable that repo. >>>>>>>>> >>>>>>>>> This is the PR that includes the metrics store installation of >>>>>>>>> OpenShift 3.9 >>>>>>>>> >>>>>>>>> https://github.com/sradco/ovirt-site/blob/74f1e772c8ca75d4b9e57a3c02cce49c5030f7f7/source/develop/release-management/features/metrics/setting-up-viaq-logging.html.md >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> It should be merged soon, but you can use it to install. >>>>>>>>> >>>>>>>>> >>>>>>>>> Please make sure to add the?ansible-inventory-origin-39-aio >>>>>>>>> file as >>>>>>>>> described below. >>>>>>>>> These are required parameters for the ansible playbook. >>>>>>>>> >>>>>>>>> >>>>>>>>> Best regards, >>>>>>>>> >>>>>>>>> --? >>>>>>>>> >>>>>>>>> SHIRLY?RADCO >>>>>>>>> >>>>>>>>> BI SeNIOR SOFTWARE ENGINEER >>>>>>>>> >>>>>>>>> Red Hat?Israel >>>>>>>>> >>>>>>>>> >>>>>>>>> TRIED. TESTED. TRUSTED. >>>>>>>>> >>>>>>>>> >>>>>>>>> On Wed, Apr 4, 2018 at 5:41 PM, Rich Megginson >>>>>>>>> >>>>>>>> > wrote: >>>>>>>>> >>>>>>>>> ??????? I'm sorry.? I misunderstood the request. >>>>>>>>> >>>>>>>>> ??????? We are in the process of updating the instructions for >>>>>>>>> installing >>>>>>>>> ??????? viaq logging based on upstream origin 3.9 - >>>>>>>>> ??????? https://github.com/ViaQ/Main/pull/37 >>>>>>>>> ??????? >>>>>>>>> >>>>>>>>> ??????? In the meantime, you can follow along on that PR, and >>>>>>>>> we will >>>>>>>>> have >>>>>>>>> ??????? instructions very soon. >>>>>>>>> >>>>>>>>> >>>>>>>>> ??????? On 04/04/2018 08:26 AM, Rich Megginson wrote: >>>>>>>>> >>>>>>>>> ??????????? On 04/04/2018 08:22 AM, Shirly Radco wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ??????????????? -- >>>>>>>>> >>>>>>>>> ??????????????? SHIRLY RADCO >>>>>>>>> >>>>>>>>> ??????????????? BI SeNIOR SOFTWARE ENGINEER >>>>>>>>> >>>>>>>>> ??????????????? Red Hat Israel >>>>>>>>> >>>>>>>>> ??????????????? >>>>>>>>> ??????????????? TRIED. TESTED. TRUSTED. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ??????????????? On Wed, Apr 4, 2018 at 5:07 PM, Peter Hudec >>>>>>>>> >>>>>>>> ??????????????? >>>>>>>> ??????????????? >> wrote: >>>>>>>>> >>>>>>>>> ??????????????? ??? almost the same issue, the versio for >>>>>>>>> openshoft >>>>>>>>> release >>>>>>>>> ??????????????? changed to 3.9 >>>>>>>>> >>>>>>>>> ??????????????? ??? Failure summary: >>>>>>>>> >>>>>>>>> >>>>>>>>> ??????????????? ??? ? 1. Hosts:? ? localhost >>>>>>>>> ??????????????? ??? ? ? ?Play:? ? ?Determine openshift_version to >>>>>>>>> configure >>>>>>>>> ??????????????? on first >>>>>>>>> ??????????????? ??? master >>>>>>>>> ??????????????? ??? ? ? ?Task:? ? ?For an RPM install, abort >>>>>>>>> when the >>>>>>>>> release >>>>>>>>> ??????????????? ??? requested does >>>>>>>>> ??????????????? ??? not match the available version. >>>>>>>>> ??????????????? ??? ? ? ?Message:? You requested openshift_release >>>>>>>>> 3.9, >>>>>>>>> ??????????????? which is not >>>>>>>>> ??????????????? ??? matched by >>>>>>>>> ??????????????? ??? ? ? ? ? ? ? ? ?the latest OpenShift RPM we >>>>>>>>> detected as >>>>>>>>> ??????????????? origin-3.10.0 >>>>>>>>> ??????????????? ??? ? ? ? ? ? ? ? ?on host localhost. >>>>>>>>> ??????????????? ??? ? ? ? ? ? ? ? ?We will only install the latest >>>>>>>>> RPMs, so >>>>>>>>> ??????????????? please ensure >>>>>>>>> ??????????????? ??? you are getting the release >>>>>>>>> ??????????????? ??? ? ? ? ? ? ? ? ?you expect. You may need to >>>>>>>>> adjust >>>>>>>>> your >>>>>>>>> ??????????????? Ansible >>>>>>>>> ??????????????? ??? inventory, modify the repositories >>>>>>>>> ??????????????? ??? ? ? ? ? ? ? ? ?available on the host, or >>>>>>>>> run the >>>>>>>>> ??????????????? appropriate OpenShift >>>>>>>>> ??????????????? ??? upgrade playbook. >>>>>>>>> >>>>>>>>> >>>>>>>>> ??????????????? What is the rpm version installed of >>>>>>>>> OpenShift?origin? >>>>>>>>> ??????????????? Do you perhaps have another repo that includes the >>>>>>>>> OpenShift >>>>>>>>> ??????????????? origin-3.10.0? >>>>>>>>> >>>>>>>>> >>>>>>>>> ??????????? origin is the upstream version of OpenShift, which is >>>>>>>>> unsupported. >>>>>>>>> >>>>>>>>> ??????????? sudo repoquery -i origin >>>>>>>>> >>>>>>>>> ??????????? This will tell you which repo it came from >>>>>>>>> >>>>>>>>> ??????????? You will need to disable that repo and uninstall any >>>>>>>>> packages >>>>>>>>> ??????????? which came from that repo >>>>>>>>> >>>>>>>>> ??????????? Another mystery is why it is trying to install origin >>>>>>>>> in the >>>>>>>>> ??????????? first place.? openshift-ansible with >>>>>>>>> ??????????? openshift_deployment_type=openshift-enterprise >>>>>>>>> should not >>>>>>>>> try to >>>>>>>>> ??????????? install origin, it should install packages with names >>>>>>>>> like >>>>>>>>> ??????????? atomic-openshift-master, atomic-openshift-node, etc. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ??????????????? ??? On 04/04/2018 14:18, Shirly Radco wrote: >>>>>>>>> ??????????????? ??? > Adding Nicolas since he hit the same issue. >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? > -- >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? > SHIRLY?RADCO >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? > BI SeNIOR SOFTWARE ENGINEER >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? > Red Hat?Israel >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? > TRIED. TESTED. TRUSTED. >>>>>>>>> >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? > On Wed, Apr 4, 2018 at 3:17 PM, Shirly Radco >>>>>>>>> ??????????????? >>>>>>>>> ??????????????? >>>>>>>> > >>>>>>>>> ??????????????? ??? > >>>>>>>> >>>>>>>>> ??????????????? >>>>>>>> >>> >>>>>>>>> wrote: >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?Hi Peter, >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?The installation instructions currently >>>>>>>>> support >>>>>>>>> ??????????????? OpenShift 3.6. >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?I'm now working on updating them to >>>>>>>>> support >>>>>>>>> 3.9. >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?You currently have 3.10 installed. >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?Please install OpenShift 3.9 using this >>>>>>>>> repository >>>>>>>>> ??????????????? ??? > >>>>>>>>> ????????????? >>>>>>>>> https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo >>>>>>>>> ???????????? >>>>>>>>> >>>>>>>>> ????????????? >>>>>>>>> >>>>>>>> ???????????? >>>>>>>>> > >>>>>>>>> ??????????????? ??? > >>>>>>>>> ???????????? >>>>>>>>> ????>>>>>>>> ???????????? >>>>>>>>> >>>>>>>>> ????????????? >>>>>>>>> >>>>>>>> ???????????? >>>>>>>>> >> >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?And add the following file to your vm >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?Run: >>>>>>>>> ??????????????? ??? >? ? ?vi /root/ansible-inventory-origin-39-aio >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?Add: >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?-------------- >>>>>>>>> ??????????????? ??? >? ? ?[OSEv3:children] >>>>>>>>> ??????????????? ??? >? ? ?nodes >>>>>>>>> ??????????????? ??? >? ? ?masters >>>>>>>>> ??????????????? ??? >? ? ?etcd >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?[OSEv3:vars] >>>>>>>>> ??????????????? ??? >? ? ?ansible_connection=local >>>>>>>>> ??????????????? ??? >? ? ?openshift_release=v3.9 >>>>>>>>> ??????????????? ??? >? ? ?openshift_logging_install_logging=true >>>>>>>>> ??????????????? ??? >? ? ?short_version=3.9 >>>>>>>>> ??????????????? ??? >? ? ?openshift_deployment_type=origin >>>>>>>>> ??????????????? ??? > >>>>>>>>> ?????????????? >>>>>>>>> ??openshift_master_identity_providers=[{'mappingMethod': >>>>>>>>> ??????????????? 'lookup', >>>>>>>>> ??????????????? ??? >? ? ?'challenge': 'true', 'login': 'true', >>>>>>>>> 'kind': >>>>>>>>> ??????????????? ??? >? ? ?'AllowAllPasswordIdentityProvider', >>>>>>>>> 'name': >>>>>>>>> ??????????????? 'allow_all'}] >>>>>>>>> ??????????????? ??? >? ? ?# bug - doesn't use correct tag >>>>>>>>> ??????????????? ??? >? ? ?openshift_logging_image_version=v3.9 >>>>>>>>> ??????????????? ??? > >>>>>>>>> ????????????? >>>>>>>>> ???openshift_logging_elasticsearch_proxy_image_version=v1.0.0 >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?openshift_logging_es_allow_external=True >>>>>>>>> ??????????????? ??? >? ? ?openshift_logging_use_mux=True >>>>>>>>> ??????????????? ??? >? ? >>>>>>>>> ?openshift_logging_mux_allow_external=True >>>>>>>>> ??????????????? ??? > >>>>>>>>> ????openshift_logging_mux_file_buffer_storage_type=hostmount >>>>>>>>> ??????????????? ??? > >>>>>>>>> ????openshift_logging_elasticsearch_storage_type=hostmount >>>>>>>>> ??????????????? ??? > >>>>>>>>> ???????????? >>>>>>>>> ????openshift_logging_elasticsearch_hostmount_path=/var/lib/elasticsearch >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?[nodes] >>>>>>>>> ??????????????? ??? >? ? ?localhost storage=True >>>>>>>>> ??????????????? openshift_node_labels="{'region': >>>>>>>>> ??????????????? ??? 'infra'}" >>>>>>>>> ??????????????? ??? >? ? ?openshift_schedulable=True >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?[masters] >>>>>>>>> ??????????????? ??? >? ? ?localhost storage=True >>>>>>>>> ??????????????? openshift_node_labels="{'region': >>>>>>>>> ??????????????? ??? 'infra'}" >>>>>>>>> ??????????????? ??? >? ? ?openshift_schedulable=True >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?[etcd] >>>>>>>>> ??????????????? ??? >? ? ?localhost storage=True >>>>>>>>> ??????????????? openshift_node_labels="{'region': >>>>>>>>> ??????????????? ??? 'infra'}" >>>>>>>>> ??????????????? ??? >? ? ?openshift_schedulable=True >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?------------ >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?Save and exit. >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?***Please make sure that you use /var as >>>>>>>>> your >>>>>>>>> ??????????????? Elasticsearch >>>>>>>>> ??????????????? ??? >? ? ?persistent storage directory. >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?And when you run the OpenShift ansible >>>>>>>>> ??????????????? ??? > >>>>>>>>> ???????????? >>>>>>>>> ????(https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ???????????? >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ???????????? >>>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ???????????? >>>>>>>>> > >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ??????????????? ??? > >>>>>>>>> ???????????? >>>>>>>>> ????>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ???????????? >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ???????????? >>>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ???????????? >>>>>>>>> >>) >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ??????????????? ??? >? ? ?use the file you just created like this: >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?# cd >>>>>>>>> /usr/share/ansible/openshift-ansible >>>>>>>>> ??????????????? ??? >? ? ?# (or wherever you cloned the git >>>>>>>>> repo if >>>>>>>>> using git) >>>>>>>>> ??????????????? ??? >? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log >>>>>>>>> ansible-playbook >>>>>>>>> ??????????????? -vvv -e >>>>>>>>> ??????????????? ??? >? ? ?@/root/vars.yaml -i >>>>>>>>> ??????????????? /root/*ansible-inventory-origin-39-aio* >>>>>>>>> ??????????????? ??? >? ? ?playbooks/byo/config.yml >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?Best regards, >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?-- >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?SHIRLY?RADCO >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?BI SeNIOR SOFTWARE ENGINEER >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?Red Hat?Israel >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ? >>>>>>>>> ??????????????? ??? >? ? ?TRIED. TESTED. TRUSTED. >>>>>>>>> >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ?On Wed, Apr 4, 2018 at 12:17 PM, Peter >>>>>>>>> Hudec >>>>>>>>> ??????????????? >>>>>>>>> >>>>>>>> ??????????????? > >>>>>>>>> ??????????????? ??? >? ? ?>>>>>>>> >>>>>>>>> ??????????????? >>> >>>>>>>>> wrote: >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ? ? ?Tried to install ovirt metrics, >>>>>>>>> but got >>>>>>>>> error >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log >>>>>>>>> ??????????????? ansible-playbook -vvv -e >>>>>>>>> ??????????????? ??? >? ? ? ? ?@/root/vars.yaml -i >>>>>>>>> ??????????????? /root/ansible-inventory-origin-37-aio >>>>>>>>> ??????????????? ??? >? ? ? ? ?playbooks/byo/config.yml >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ? ? ?? 1. Hosts:? ? localhost >>>>>>>>> ??????????????? ??? >? ? ? ? ?? ? ?Play:? ? ?Determine >>>>>>>>> openshift_version to >>>>>>>>> ??????????????? configure >>>>>>>>> ??????????????? ??? on first >>>>>>>>> ??????????????? ??? >? ? ? ? ?master >>>>>>>>> ??????????????? ??? >? ? ? ? ?? ? ?Task:? ? ?For an RPM install, >>>>>>>>> abort when >>>>>>>>> ??????????????? the release >>>>>>>>> ??????????????? ??? >? ? ? ? ?requested does >>>>>>>>> ??????????????? ??? >? ? ? ? ?not match the available version. >>>>>>>>> ??????????????? ??? >? ? ? ? ?? ? ?Message:? You requested >>>>>>>>> openshift_release >>>>>>>>> ??????????????? 3.7, >>>>>>>>> ??????????????? ??? which is not >>>>>>>>> ??????????????? ??? >? ? ? ? ?matched by >>>>>>>>> ??????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?the latest OpenShift >>>>>>>>> RPM we >>>>>>>>> ??????????????? detected as >>>>>>>>> ??????????????? ??? origin-3.10.0 >>>>>>>>> ??????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?on host localhost. >>>>>>>>> ??????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?We will only >>>>>>>>> install the >>>>>>>>> latest >>>>>>>>> ??????????????? RPMs, so >>>>>>>>> ??????????????? ??? please >>>>>>>>> ??????????????? ??? >? ? ? ? ?ensure >>>>>>>>> ??????????????? ??? >? ? ? ? ?you are getting the release >>>>>>>>> ??????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?you expect. You may >>>>>>>>> need to >>>>>>>>> ??????????????? adjust your >>>>>>>>> ??????????????? ??? Ansible >>>>>>>>> ??????????????? ??? >? ? ? ? ?inventory, modify the repositories >>>>>>>>> ??????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?available on the >>>>>>>>> host, >>>>>>>>> or run >>>>>>>>> ??????????????? the appropriate >>>>>>>>> ??????????????? ??? >? ? ? ? ?OpenShift >>>>>>>>> ??????????????? ??? >? ? ? ? ?upgrade playbook. >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ? ? ?? ? ? ? regards >>>>>>>>> ??????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ? Peter >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ? ? ?On 04/04/2018 09:13, Fred Rolland >>>>>>>>> wrote: >>>>>>>>> ??????????????? ??? >? ? ? ? ?> Hi, >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? ??? >? ? ? ? ?> Check these links: >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ???????????????????????????? >>>>>>>>> https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ >>>>>>>>> ???????????? >>>>>>>>> >>>>>>>>> ????????????? >>>>>>>>> >>>>>>>> ???????????? >>>>>>>>> > >>>>>>>>> ??????????????? ??? > >>>>>>>>> ???????????? >>>>>>>>> ????>>>>>>>> ???????????? >>>>>>>>> >>>>>>>>> ????????????? >>>>>>>>> >>>>>>>> ???????????? >>>>>>>>> >> >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ???????????? >>>>>>>>> https://ovirt.org/develop/release-management/features/metrics/metrics-store/ >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ???????????? >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ???????????? >>>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ???????????? >>>>>>>>> > >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ??????????????? ??? > >>>>>>>>> ???????????? >>>>>>>>> ????>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ???????????? >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ???????????? >>>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ???????????? >>>>>>>>> >> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? ??? >? ? ? ? ?> Regards, >>>>>>>>> ??????????????? ??? >? ? ? ? ?> Fred >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? ??? >? ? ? ? ?> On Tue, Apr 3, 2018 at 9:38 AM, >>>>>>>>> Anantha >>>>>>>>> Raghava >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>> ??????????????? >>>>>>>>> ??????????????? ??? >>>>>>>> ??????????????? > >>>>>>>>> ??????????????? ??? >? ? ? ? >>>>>>>>> ?>>>>>>>> ??????????????? >>>>>>>>> ??????????????? ??? >>>>>>>> ??????????????? >> >>>>>>>>> ??????????????? ??? >? ? ? ? >>>>>>>>> ?>>>>>>>> ??????????????? >>>>>>>>> ??????????????? ??? >>>>>>>> ??????????????? > >>>>>>>>> ??????????????? ??? >? ? ? ? >>>>>>>>> ?>>>>>>>> ??????????????? >>>>>>>>> ??????????????? ??? >>>>>>>> ??????????????? >>>> >>>>>>>>> ??????????????? ??? >? ? ? ? ?> wrote: >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? ??? >? ? ? ? ?>? ? ?Hi, >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? ??? >? ? ? ? ?>? ? ?I see that oVirt DWH is >>>>>>>>> installed >>>>>>>>> with >>>>>>>>> ??????????????? Version >>>>>>>>> ??????????????? ??? 4.2.x. Now, how do I >>>>>>>>> ??????????????? ??? >? ? ? ? ?>? ? ?take the reports? I version >>>>>>>>> 3.5, >>>>>>>>> we had >>>>>>>>> ??????????????? Jasper >>>>>>>>> ??????????????? ??? reports module using >>>>>>>>> ??????????????? ??? >? ? ? ? ?>? ? ?which we could take >>>>>>>>> utilization >>>>>>>>> reports. >>>>>>>>> ??????????????? Can we do >>>>>>>>> ??????????????? ??? something similar >>>>>>>>> ??????????????? ??? >? ? ? ? ?>? ? ?here? >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? ??? >? ? ? ? ?>? ? ?-- >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? ??? >? ? ? ? ?>? ? ?Thanks & Regards, >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? ??? >? ? ? ? ?>? ? ?Anantha Raghava >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? ??? >? ? ? ? ?>? ? ?Do not print this e-mail >>>>>>>>> unless >>>>>>>>> ??????????????? required. Save >>>>>>>>> ??????????????? ??? Paper & trees. >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ????_______________________________________________ >>>>>>>>> ??????????????? ??? >? ? ? ? ?>? ? ?Users mailing list >>>>>>>>> ??????????????? ??? >? ? ? ? ?> Users at ovirt.org >>>>>>>>> >>>>>>>>> ??????????????? > >>>>>>>>> ??????????????? ??? >>>>>>>> >>>>>>>>> ??????????????? >> >>>>>>>>> ??????????????? ??? >? ? ? ? ?>>>>>>>> ??????????????? >>>>>>>> ??????????????? > >>>>>>>>> ??????????????? ??? >>>>>>>> >>>>>>>>> ??????????????? >>>>>>>> >>> >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>> ??????????????? >>>>>>>>> ??????????????? ??? >>>>>>>> ??????????????? > >>>>>>>>> ??????????????? ??? > >>>>>>>>> ?>>>>>>>> ??????????????? >>>>>>>>> ??????????????? ??? >>>>>>>> ??????????????? >> >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? ?>>>>>>>> ??????????????? >>>>>>>>> ??????????????? ??? >>>>>>>> ??????????????? > >>>>>>>>> ??????????????? ??? > >>>>>>>>> ?>>>>>>>> ??????????????? >>>>>>>>> ??????????????? >>>>>>>> ??????????????? >>> >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> _______________________________________________ >>>>>>>>> ??????????????? ??? >? ? ? ? ?> Users mailing list >>>>>>>>> ??????????????? ??? >? ? ? ? ?> Users at ovirt.org >>>>>>>>> >>>>>>>>> ??????????????? > >>>>>>>>> ??????????????? ??? >>>>>>>> >>>>>>>>> ??????????????? >> >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>> ??????????????? >>>>>>>>> ??????????????? ??? >>>>>>>> ??????????????? > >>>>>>>>> ??????????????? ??? > >>>>>>>>> ?>>>>>>>> ??????????????? >>>>>>>>> ??????????????? ??? >>>>>>>> ??????????????? >> >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ? ? ?-- >>>>>>>>> ??????????????? ??? >? ? ? ? ?*Peter Hudec* >>>>>>>>> ??????????????? ??? >? ? ? ? ?Infra?trukt?rny architekt >>>>>>>>> ??????????????? ??? > phudec at cnc.sk >>>>>>>>> ??????????????? > >>>>>>>>> ??????????????? >>>>>>>>> ??????????????? ??? >> >>>>>>>>> ??????????????? >>>>>>>>> ??????????????? > >>>>>>>>> ??????????????? ??? >?????? ?>>>>>>>> >>>>>>>>> ??????????????? >>> >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ? ? ?*CNC,?a.s.* >>>>>>>>> ??????????????? ??? >? ? ? ? ?Borsk? 6,?841 04 Bratislava >>>>>>>>> ??????????????? ??? >? ? ? ? ?Recepcia:?+421 2? 35 000 100 >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? >? ? ? ? ?Mobil:+421?905 997 203 >>>>>>>>> ??????????????? ??? >? ? ? ? ?*www.cnc.sk >>>>>>>>> ??????????????? * >>>>>>>>> ??????????????? ??? >>>>>>>>> >>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? > >>>>>>>>> ????_______________________________________________ >>>>>>>>> ??????????????? ??? >? ? ? ? ?Users mailing list >>>>>>>>> ??????????????? ??? > Users at ovirt.org >>>>>>>>> ??????????????? > >>>>>>>>> ??????????????? >>>>>>>>> ??????????????? ??? >>>>>>>> >> >>>>>>>>> ??????????????? ??? > >>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>> ??????????????? >>>>>>>>> ??????????????? ??? >>>>>>>> ??????????????? > >>>>>>>>> ??????????????? ??? > >>>>>>>>> ?>>>>>>>> ??????????????? >>>>>>>>> ??????????????? ??? >>>>>>>> ??????????????? >> >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? > >>>>>>>>> ??????????????? ??? > >>>>>>>>> >>>>>>>>> >>>>>>>>> ??????????????? ??? -- >>>>>>>>> ??????????????? ??? *Peter Hudec* >>>>>>>>> ??????????????? ??? Infra?trukt?rny architekt >>>>>>>>> ??????????????? ??? phudec at cnc.sk >>>>>>>>> ??????????????? > >>>>>>>>> ??????????????? >>>>>>>>> ??????????????? ??? >> >>>>>>>>> >>>>>>>>> ??????????????? ??? *CNC,?a.s.* >>>>>>>>> ??????????????? ??? Borsk? 6,?841 04 Bratislava >>>>>>>>> ??????????????? ??? Recepcia:?+421 2? 35 000 100 >>>>>>>>> >>>>>>>>> ??????????????? ??? Mobil:+421?905 997 203 >>>>>>>>> ??????????????? ??? *www.cnc.sk >>>>>>>>> * >>>>>>>>> ??????????????? >>>>>>>>> ??????????????? ??? > >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >> > -- *Peter Hudec* Infra?trukt?rny architekt phudec at cnc.sk *CNC,?a.s.* Borsk? 6,?841 04 Bratislava Recepcia:?+421 2? 35 000 100 Mobil:+421?905 997 203 *www.cnc.sk* From gsswzt at pku.edu.cn Thu Apr 12 08:45:21 2018 From: gsswzt at pku.edu.cn (gsswzt at pku.edu.cn) Date: Thu, 12 Apr 2018 16:45:21 +0800 Subject: [ovirt-users] Some questions about Ovirt REST API References: <2018041114193731867221@pku.edu.cn>, <4d18e637-e8a3-1cff-d24a-c89ef623a29d@redhat.com>, <2018041216141602964044@pku.edu.cn>, <7691fba8-01ed-6fef-7afc-97a504f2374f@redhat.com> Message-ID: <2018041216452168103048@pku.edu.cn> Sure. I override get() and add() in my BackendVmMytestsResource.java GET works and POST not. From: Ondra Machacek Date: 2018-04-12 16:25 To: gsswzt at pku.edu.cn; users Subject: Re: [ovirt-users] Some questions about Ovirt REST API Ah sorry, POST isn't working and GET works, I misread it. Can you please share the generated file: {project_path}/backend/manager/modules/restapi/interface/definition/target/generated-sources/model/org/ovirt/engine/api/resource/VmMytestResource.java Maybe you can even send patches to review as draft for start, we could better understand the patch then. On 04/12/2018 10:14 AM, gsswzt at pku.edu.cn wrote: > Do you mean /@override/ /getMytestsResource() / in BackendVmResource ? > I have done that, otherwise GET would not pass. > > *From:* Ondra Machacek > *Date:* 2018-04-12 15:43 > *To:* gsswzt at pku.edu.cn ; users > > *Subject:* Re: [ovirt-users] Some questions about Ovirt REST API > On 04/11/2018 08:19 AM, gsswzt at pku.edu.cn wrote: > > Hi, > > > > I wants to creating my own service under > ../vms/{vmid}/myservice.Here is > > my methods: > > > > 1. create VmMytestService in > > /https://github.com/oVirt/ovirt-engine-api-model project./ > > add/@Service VmMytestService mytests() in /VmService .java > > 2. mvn install it and change the root pom.xml > > /4.3.9-SNAPSHOT / in my Ovirt project. > > 3.create BackendVmMytestService implements VmMytestResource > Did you also in BackendVmResource implemented 'mytests' method? > > 4.override /get() and add() /methods. > > > > After that, I use /curl/ tool to send GET and POST request. GET is > > working and return. > > However, I get this return after POST request. > > > > Would you help me with that issue? > > > > Thanks, > > wenzt > > > > > > _______________________________________________ > > Users mailing list > > Users at ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: VmMytestResource.java Type: application/octet-stream Size: 1587 bytes Desc: not available URL: From gsswzt at pku.edu.cn Thu Apr 12 09:12:02 2018 From: gsswzt at pku.edu.cn (gsswzt at pku.edu.cn) Date: Thu, 12 Apr 2018 17:12:02 +0800 Subject: [ovirt-users] Some questions about Ovirt REST API References: <2018041114193731867221@pku.edu.cn>, <4d18e637-e8a3-1cff-d24a-c89ef623a29d@redhat.com>, <2018041216141602964044@pku.edu.cn>, <7691fba8-01ed-6fef-7afc-97a504f2374f@redhat.com> Message-ID: <2018041217120198210259@pku.edu.cn> Sorry for one more question. I want add an Action like .../vms/{vm:ID}/myaction So, 1. I add api in api-model project and mvn clean install. 2. After mvn clean install my ovirt engine project. I get the generated file : VmResource In that file I get Question: I cant find href 'myaction' in GET request feedback.xml .... I must have misunderstood sth. From: Ondra Machacek Date: 2018-04-12 16:25 To: gsswzt at pku.edu.cn; users Subject: Re: [ovirt-users] Some questions about Ovirt REST API Ah sorry, POST isn't working and GET works, I misread it. Can you please share the generated file: {project_path}/backend/manager/modules/restapi/interface/definition/target/generated-sources/model/org/ovirt/engine/api/resource/VmMytestResource.java Maybe you can even send patches to review as draft for start, we could better understand the patch then. On 04/12/2018 10:14 AM, gsswzt at pku.edu.cn wrote: > Do you mean /@override/ /getMytestsResource() / in BackendVmResource ? > I have done that, otherwise GET would not pass. > > *From:* Ondra Machacek > *Date:* 2018-04-12 15:43 > *To:* gsswzt at pku.edu.cn ; users > > *Subject:* Re: [ovirt-users] Some questions about Ovirt REST API > On 04/11/2018 08:19 AM, gsswzt at pku.edu.cn wrote: > > Hi, > > > > I wants to creating my own service under > ../vms/{vmid}/myservice.Here is > > my methods: > > > > 1. create VmMytestService in > > /https://github.com/oVirt/ovirt-engine-api-model project./ > > add/@Service VmMytestService mytests() in /VmService .java > > 2. mvn install it and change the root pom.xml > > /4.3.9-SNAPSHOT / in my Ovirt project. > > 3.create BackendVmMytestService implements VmMytestResource > Did you also in BackendVmResource implemented 'mytests' method? > > 4.override /get() and add() /methods. > > > > After that, I use /curl/ tool to send GET and POST request. GET is > > working and return. > > However, I get this return after POST request. > > > > Would you help me with that issue? > > > > Thanks, > > wenzt > > > > > > _______________________________________________ > > Users mailing list > > Users at ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: CatchD8F3.jpg Type: image/jpeg Size: 52549 bytes Desc: not available URL: From eraviv at redhat.com Thu Apr 12 09:12:20 2018 From: eraviv at redhat.com (Eitan Raviv) Date: Thu, 12 Apr 2018 12:12:20 +0300 Subject: [ovirt-users] admin account constantly gets locked In-Reply-To: <9936BF6BA7EAF843AAB3A4ECC0FBB3ABE7DD48@ExchangePBR.GemPbr.local> References: <9936BF6BA7EAF843AAB3A4ECC0FBB3ABE7DD48@ExchangePBR.GemPbr.local> Message-ID: The sync network command is probably unrelated. Can you attach the full engine and the setup logs? Martin, this looks a bit like [1]. Any idea? Thanks [1] https://bugzilla.redhat.com/show_bug.cgi?id=1410955 On Thu, Apr 12, 2018 at 10:22 AM, K?fer Marcel wrote: > Hello, > > a few days ago I installed an ovirt-engine 4.2.2.6 following the steps of > the documentation. After the installation I logged in to the admin page, > configured a datadomain and changed the admin password. After a few hours I > tried to login again, using the new password and got "Unable to log in > because the user account is disabled or locked. Contact the system > administrator." So I unlocked the admin account from the shell using > "ovirt-aaa-jdbc-tool user unlock admin" which worked fine and I was able to > continue working till the next login. > > I traced the /var/log/ovirt-engine/engine.log and found this after > unlocking the admin account again. > > 2018-04-12 09:06:19,984+02 INFO [org.ovirt.engine.core.bll. > provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) > [2ed5aa42] Lock Acquired to object 'EngineLock:{exclusiveLocks='[ > e37c0b9e-09bc-4893-9b0c-c70f56d6ecfc=PROVIDER]', sharedLocks=''}' > 2018-04-12 09:06:19,991+02 INFO [org.ovirt.engine.core.bll. > provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) > [2ed5aa42] Running command: SyncNetworkProviderCommand internal: true. > 2018-04-12 09:06:20,102+02 INFO [org.ovirt.engine.extension.aaa.jdbc.core.Authentication] > (default task-239) [] locking user: admin due to interval failures > 2018-04-12 09:06:25,046+02 ERROR [org.ovirt.engine.core.sso.utils.SsoUtils] > (default task-239) [] OAuthException access_denied: Cannot authenticate > user 'admin at internal': The username or password is incorrect.. > 2018-04-12 09:06:25,049+02 ERROR [org.ovirt.engine.core.bll. > provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) > [2ed5aa42] Command 'org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand' > failed: EngineException: (Failed with error Unauthorized and code 5050) > 2018-04-12 09:06:25,050+02 INFO [org.ovirt.engine.core.bll. > provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) > [2ed5aa42] Lock freed to object 'EngineLock:{exclusiveLocks='[ > e37c0b9e-09bc-4893-9b0c-c70f56d6ecfc=PROVIDER]', sharedLocks=''}' > > It seems like the SyncNetworkProviderCommand is somehow locking the admin > account. I already restarted the whole machine but it didn't help. > > Can someone please point me in the right direction, where to find the > error? > > Thanks in advance > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > -- Eitan Raviv IRC: erav (#ovirt #vdsm #devel #rhev-dev) -------------- next part -------------- An HTML attachment was scrubbed... URL: From eraviv at redhat.com Thu Apr 12 10:44:33 2018 From: eraviv at redhat.com (Eitan Raviv) Date: Thu, 12 Apr 2018 13:44:33 +0300 Subject: [ovirt-users] admin account constantly gets locked In-Reply-To: <9936BF6BA7EAF843AAB3A4ECC0FBB3ABE7DEB1@ExchangePBR.GemPbr.local> References: <9936BF6BA7EAF843AAB3A4ECC0FBB3ABE7DEB1@ExchangePBR.GemPbr.local> Message-ID: The recurring denied access for every SyncNetworkProvider might be because you changed the admin password on the engine but not on the provider. Dominik, will updating to the same password on the provider solve the denied access? Martin, does the engine lock out the admin user for failed retries? HTH On Thu, Apr 12, 2018 at 12:29 PM, K?fer Marcel wrote: > Here are the logfiles? > > > > Thanks > > > > *Von:* Eitan Raviv [mailto:eraviv at redhat.com] > *Gesendet:* Donnerstag, 12. April 2018 11:12 > *An:* K?fer Marcel > *Cc:* users at ovirt.org; Martin Perina > *Betreff:* Re: [ovirt-users] admin account constantly gets locked > > > > The sync network command is probably unrelated. > > Can you attach the full engine and the setup logs? > > Martin, this looks a bit like [1]. Any idea? > > Thanks > > > > [1] https://bugzilla.redhat.com/show_bug.cgi?id=1410955 > > > > On Thu, Apr 12, 2018 at 10:22 AM, K?fer Marcel > wrote: > > Hello, > > a few days ago I installed an ovirt-engine 4.2.2.6 following the steps of > the documentation. After the installation I logged in to the admin page, > configured a datadomain and changed the admin password. After a few hours I > tried to login again, using the new password and got "Unable to log in > because the user account is disabled or locked. Contact the system > administrator." So I unlocked the admin account from the shell using > "ovirt-aaa-jdbc-tool user unlock admin" which worked fine and I was able to > continue working till the next login. > > I traced the /var/log/ovirt-engine/engine.log and found this after > unlocking the admin account again. > > 2018-04-12 09:06:19,984+02 INFO [org.ovirt.engine.core.bll. > provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) > [2ed5aa42] Lock Acquired to object 'EngineLock:{exclusiveLocks='[ > e37c0b9e-09bc-4893-9b0c-c70f56d6ecfc=PROVIDER]', sharedLocks=''}' > 2018-04-12 09:06:19,991+02 INFO [org.ovirt.engine.core.bll. > provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) > [2ed5aa42] Running command: SyncNetworkProviderCommand internal: true. > 2018-04-12 09:06:20,102+02 INFO [org.ovirt.engine.extension.aaa.jdbc.core.Authentication] > (default task-239) [] locking user: admin due to interval failures > 2018-04-12 09:06:25,046+02 ERROR [org.ovirt.engine.core.sso.utils.SsoUtils] > (default task-239) [] OAuthException access_denied: Cannot authenticate > user 'admin at internal': The username or password is incorrect.. > 2018-04-12 09:06:25,049+02 ERROR [org.ovirt.engine.core.bll. > provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) > [2ed5aa42] Command 'org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand' > failed: EngineException: (Failed with error Unauthorized and code 5050) > 2018-04-12 09:06:25,050+02 INFO [org.ovirt.engine.core.bll. > provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) > [2ed5aa42] Lock freed to object 'EngineLock:{exclusiveLocks='[ > e37c0b9e-09bc-4893-9b0c-c70f56d6ecfc=PROVIDER]', sharedLocks=''}' > > It seems like the SyncNetworkProviderCommand is somehow locking the admin > account. I already restarted the whole machine but it didn't help. > > Can someone please point me in the right direction, where to find the > error? > > Thanks in advance > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > > > -- > > Eitan Raviv > IRC: erav (#ovirt #vdsm #devel #rhev-dev) > -- Eitan Raviv IRC: erav (#ovirt #vdsm #devel #rhev-dev) -------------- next part -------------- An HTML attachment was scrubbed... URL: From mperina at redhat.com Thu Apr 12 11:04:51 2018 From: mperina at redhat.com (Martin Perina) Date: Thu, 12 Apr 2018 13:04:51 +0200 Subject: [ovirt-users] admin account constantly gets locked In-Reply-To: References: <9936BF6BA7EAF843AAB3A4ECC0FBB3ABE7DEB1@ExchangePBR.GemPbr.local> Message-ID: On Thu, Apr 12, 2018 at 12:44 PM, Eitan Raviv wrote: > The recurring denied access for every SyncNetworkProvider might be because > you changed the admin password on the engine but not on the provider. > > Dominik, will updating to the same password on the provider solve the > denied access? > Martin, does the engine lock out the admin user for failed retries? > ?Of course, after 5 incorrect logins the account is locked. But I looked at logs and I can't see any login errors, so currently trying to reproduce to find out what's going on ... ? > > > HTH > > > On Thu, Apr 12, 2018 at 12:29 PM, K?fer Marcel > wrote: > >> Here are the logfiles? >> >> >> >> Thanks >> >> >> >> *Von:* Eitan Raviv [mailto:eraviv at redhat.com] >> *Gesendet:* Donnerstag, 12. April 2018 11:12 >> *An:* K?fer Marcel >> *Cc:* users at ovirt.org; Martin Perina >> *Betreff:* Re: [ovirt-users] admin account constantly gets locked >> >> >> >> The sync network command is probably unrelated. >> >> Can you attach the full engine and the setup logs? >> >> Martin, this looks a bit like [1]. Any idea? >> >> Thanks >> >> >> >> [1] https://bugzilla.redhat.com/show_bug.cgi?id=1410955 >> >> >> >> On Thu, Apr 12, 2018 at 10:22 AM, K?fer Marcel < >> marcel.kaefer at putzbrunn.de> wrote: >> >> Hello, >> >> a few days ago I installed an ovirt-engine 4.2.2.6 following the steps of >> the documentation. After the installation I logged in to the admin page, >> configured a datadomain and changed the admin password. After a few hours I >> tried to login again, using the new password and got "Unable to log in >> because the user account is disabled or locked. Contact the system >> administrator." So I unlocked the admin account from the shell using >> "ovirt-aaa-jdbc-tool user unlock admin" which worked fine and I was able to >> continue working till the next login. >> >> I traced the /var/log/ovirt-engine/engine.log and found this after >> unlocking the admin account again. >> >> 2018-04-12 09:06:19,984+02 INFO [org.ovirt.engine.core.bll.pro >> vider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) >> [2ed5aa42] Lock Acquired to object 'EngineLock:{exclusiveLocks='[ >> e37c0b9e-09bc-4893-9b0c-c70f56d6ecfc=PROVIDER]', sharedLocks=''}' >> 2018-04-12 09:06:19,991+02 INFO [org.ovirt.engine.core.bll.pro >> vider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) >> [2ed5aa42] Running command: SyncNetworkProviderCommand internal: true. >> 2018-04-12 09:06:20,102+02 INFO [org.ovirt.engine.extension.aaa.jdbc.core.Authentication] >> (default task-239) [] locking user: admin due to interval failures >> 2018-04-12 09:06:25,046+02 ERROR [org.ovirt.engine.core.sso.utils.SsoUtils] >> (default task-239) [] OAuthException access_denied: Cannot authenticate >> user 'admin at internal': The username or password is incorrect.. >> 2018-04-12 09:06:25,049+02 ERROR [org.ovirt.engine.core.bll.pro >> vider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) >> [2ed5aa42] Command 'org.ovirt.engine.core.bll.pro >> vider.network.SyncNetworkProviderCommand' failed: EngineException: >> (Failed with error Unauthorized and code 5050) >> 2018-04-12 09:06:25,050+02 INFO [org.ovirt.engine.core.bll.pro >> vider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) >> [2ed5aa42] Lock freed to object 'EngineLock:{exclusiveLocks='[ >> e37c0b9e-09bc-4893-9b0c-c70f56d6ecfc=PROVIDER]', sharedLocks=''}' >> >> It seems like the SyncNetworkProviderCommand is somehow locking the admin >> account. I already restarted the whole machine but it didn't help. >> >> Can someone please point me in the right direction, where to find the >> error? >> >> Thanks in advance >> >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> >> >> >> -- >> >> Eitan Raviv >> IRC: erav (#ovirt #vdsm #devel #rhev-dev) >> > > > > -- > Eitan Raviv > IRC: erav (#ovirt #vdsm #devel #rhev-dev) > -- Martin Perina Associate Manager, Software Engineering Red Hat Czech s.r.o. -------------- next part -------------- An HTML attachment was scrubbed... URL: From daniel.menzel at hhi.fraunhofer.de Thu Apr 12 11:13:33 2018 From: daniel.menzel at hhi.fraunhofer.de (Daniel Menzel) Date: Thu, 12 Apr 2018 13:13:33 +0200 Subject: [ovirt-users] Decrease downtime for HA In-Reply-To: <1c7f3633-258f-0365-443e-6389b77c7ad4@hhi.fraunhofer.de> References: <70878a1e-04f1-8241-b2d8-d9474893538b@hhi.fraunhofer.de> <0FFA46D6-66F7-4CE8-A200-DF3CDFD0F8FE@redhat.com> <4a4276c3-0a16-98c2-e50a-7491ca00c94d@hhi.fraunhofer.de> <585D25A6-78B5-4416-BA44-7BFE91869077@redhat.com> <1c7f3633-258f-0365-443e-6389b77c7ad4@hhi.fraunhofer.de> Message-ID: <06c8eaf2-2eb1-8f28-4415-40f39bd900c9@hhi.fraunhofer.de> Hi there, does anyone have an idea how to decrease a virtual machine's downtime? Best Daniel On 06.04.2018 13:34, Daniel Menzel wrote: > > Hi Michal, > > (sorry for misspelling your name in my first mail). > > The settings for the VMs are the following (oVirt 4.2): > > 1. HA checkbox enabled of course > 2. "Target Storage Domain for VM Lease" -> left empty > 3. "Resume Behavior" -> AUTO_RESUME > 4. Priority for Migration -> High > 5. "Watchdog Model" -> No-Watchdog > > For testing we did not kill any VM but the host. So basically we > simulated an instantaneous crash by manually turning the machine off > via IPMI-Interface (not via operating system!) and ping the guest(s). > What happens then? > > 1. 2-3 seconds after the we press the host's shutdown button we lose > ping contact to the VM(s). > 2. After another 20s oVirt changes the host's status to "connecting", > the VM's status is set to a question mark. > 3. After ~1:30 the host is flagged to "non responsive" > 4. After ~2:10 the host's reboot is initiated by oVirt, 5-10s later > the guest is back online. > > So, there seems to be one mistake I made in the first mail: The > downtime is "only" 2.5min. But still I think this time can be > decreased as for some services it is still quite a long time. > > Best > Daniel > > > On 06.04.2018 12:49, Michal Skrivanek wrote: >>> On 6 Apr 2018, at 12:45, Daniel Menzel wrote: >>> >>> Hi Michael, >>> thanks for your mail. Sorry, I forgot to write that. Yes, we have power management and fencing enabled on all hosts. We also tested this and found out that it works perfectly. So this cannot be the reason I guess. >> Hi Daniel, >> ok, then it?s worth looking into details. Can you describe in more detail what happens? What exact settings you?re using for such VM? Are you killing the HE VM or other VMs or both? Would be good to narrow it down a bit and then review the exact flow >> >> Thanks, >> michal >> >>> Daniel >>> >>> >>> >>> On 06.04.2018 11:11, Michal Skrivanek wrote: >>>>> On 4 Apr 2018, at 15:36, Daniel Menzel wrote: >>>>> >>>>> Hello, >>>>> >>>>> we're successfully using a setup with 4 Nodes and a replicated Gluster for storage. The engine is self hosted. What we're dealing with at the moment is the high availability: If a node fails (for example simulated by a forced power loss) the engine comes back up online withing ~2min. But guests (having the HA option enabled) come back online only after a very long grace time of ~5min. As we have a reliable network (40 GbE) and reliable servers I think that the default grace times are way too high for us - is there any possibility to change those values? >>>> And do you have Power Management(iLO, iDRAC,etc) configured for your hosts? Otherwise we have to resort to relatively long timeouts to make sure the host is really dead >>>> Thanks, >>>> michal >>>>> Thanks in advance! >>>>> Daniel >>>>> >>>>> _______________________________________________ >>>>> Users mailing list >>>>> Users at ovirt.org >>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>> >>>>> > > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users -------------- next part -------------- An HTML attachment was scrubbed... URL: From phudec at cnc.sk Thu Apr 12 11:50:35 2018 From: phudec at cnc.sk (Peter Hudec) Date: Thu, 12 Apr 2018 13:50:35 +0200 Subject: [ovirt-users] vdsm hook noipspoof on interface level Message-ID: Hi, I would like to restrict of usage IP address on VMs. Thos could be achied by usinf clear-filter instead of vdsm-no-mac-spoofing. I have found noipspoof vdsm hook, https://github.com/oVirt/vdsm/tree/master/vdsm_hooks/noipspoof. This hook but set the filtering on all interfaces, the setting is on VM level, not interface level. So if the there are more interfaces on all of them. I would like just restrict the WAN interface on multi homed VMs. Peter -- *Peter Hudec* Infra?trukt?rny architekt phudec at cnc.sk *CNC,?a.s.* Borsk? 6,?841 04 Bratislava Recepcia:?+421 2? 35 000 100 Mobil:+421?905 997 203 *www.cnc.sk* From mperina at redhat.com Thu Apr 12 11:57:45 2018 From: mperina at redhat.com (Martin Perina) Date: Thu, 12 Apr 2018 13:57:45 +0200 Subject: [ovirt-users] admin account constantly gets locked In-Reply-To: References: <9936BF6BA7EAF843AAB3A4ECC0FBB3ABE7DEB1@ExchangePBR.GemPbr.local> Message-ID: On Thu, Apr 12, 2018 at 1:04 PM, Martin Perina wrote: > > > On Thu, Apr 12, 2018 at 12:44 PM, Eitan Raviv wrote: > >> The recurring denied access for every SyncNetworkProvider might be >> because you changed the admin password on the engine but not on the >> provider. >> >> Dominik, will updating to the same password on the provider solve the >> denied access? >> Martin, does the engine lock out the admin user for failed retries? >> > > ?Of course, after 5 incorrect logins the account is locked. But I looked > at logs and I can't see any login errors, so currently trying to reproduce > to find out what's going on ... > ?OK, so confirmed. If you change password for admin at internal using aaa-jdbc-tool and you don't change immediately for OVN provider, then admin at interal account is locked. We should probably change logic in OVN provider to shutdown the OVN provider service if authentication failure to engine is raised. Using this we will break OVN provider, but it seems to me much less severe than locking admin at internal account. Dominik, what do you think? ? > ? > > >> >> >> HTH >> >> >> On Thu, Apr 12, 2018 at 12:29 PM, K?fer Marcel < >> marcel.kaefer at putzbrunn.de> wrote: >> >>> Here are the logfiles? >>> >>> >>> >>> Thanks >>> >>> >>> >>> *Von:* Eitan Raviv [mailto:eraviv at redhat.com] >>> *Gesendet:* Donnerstag, 12. April 2018 11:12 >>> *An:* K?fer Marcel >>> *Cc:* users at ovirt.org; Martin Perina >>> *Betreff:* Re: [ovirt-users] admin account constantly gets locked >>> >>> >>> >>> The sync network command is probably unrelated. >>> >>> Can you attach the full engine and the setup logs? >>> >>> Martin, this looks a bit like [1]. Any idea? >>> >>> Thanks >>> >>> >>> >>> [1] https://bugzilla.redhat.com/show_bug.cgi?id=1410955 >>> >>> >>> >>> On Thu, Apr 12, 2018 at 10:22 AM, K?fer Marcel < >>> marcel.kaefer at putzbrunn.de> wrote: >>> >>> Hello, >>> >>> a few days ago I installed an ovirt-engine 4.2.2.6 following the steps >>> of the documentation. After the installation I logged in to the admin page, >>> configured a datadomain and changed the admin password. After a few hours I >>> tried to login again, using the new password and got "Unable to log in >>> because the user account is disabled or locked. Contact the system >>> administrator." So I unlocked the admin account from the shell using >>> "ovirt-aaa-jdbc-tool user unlock admin" which worked fine and I was able to >>> continue working till the next login. >>> >>> I traced the /var/log/ovirt-engine/engine.log and found this after >>> unlocking the admin account again. >>> >>> 2018-04-12 09:06:19,984+02 INFO [org.ovirt.engine.core.bll.pro >>> vider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) >>> [2ed5aa42] Lock Acquired to object 'EngineLock:{exclusiveLocks='[ >>> e37c0b9e-09bc-4893-9b0c-c70f56d6ecfc=PROVIDER]', sharedLocks=''}' >>> 2018-04-12 09:06:19,991+02 INFO [org.ovirt.engine.core.bll.pro >>> vider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) >>> [2ed5aa42] Running command: SyncNetworkProviderCommand internal: true. >>> 2018-04-12 09:06:20,102+02 INFO [org.ovirt.engine.extension.aaa.jdbc.core.Authentication] >>> (default task-239) [] locking user: admin due to interval failures >>> 2018-04-12 09:06:25,046+02 ERROR [org.ovirt.engine.core.sso.utils.SsoUtils] >>> (default task-239) [] OAuthException access_denied: Cannot authenticate >>> user 'admin at internal': The username or password is incorrect.. >>> 2018-04-12 09:06:25,049+02 ERROR [org.ovirt.engine.core.bll.pro >>> vider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) >>> [2ed5aa42] Command 'org.ovirt.engine.core.bll.pro >>> vider.network.SyncNetworkProviderCommand' failed: EngineException: >>> (Failed with error Unauthorized and code 5050) >>> 2018-04-12 09:06:25,050+02 INFO [org.ovirt.engine.core.bll.pro >>> vider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-87) >>> [2ed5aa42] Lock freed to object 'EngineLock:{exclusiveLocks='[ >>> e37c0b9e-09bc-4893-9b0c-c70f56d6ecfc=PROVIDER]', sharedLocks=''}' >>> >>> It seems like the SyncNetworkProviderCommand is somehow locking the >>> admin account. I already restarted the whole machine but it didn't help. >>> >>> Can someone please point me in the right direction, where to find the >>> error? >>> >>> Thanks in advance >>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users at ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >>> >>> >>> -- >>> >>> Eitan Raviv >>> IRC: erav (#ovirt #vdsm #devel #rhev-dev) >>> >> >> >> >> -- >> Eitan Raviv >> IRC: erav (#ovirt #vdsm #devel #rhev-dev) >> > > > > -- > Martin Perina > Associate Manager, Software Engineering > Red Hat Czech s.r.o. > -- Martin Perina Associate Manager, Software Engineering Red Hat Czech s.r.o. -------------- next part -------------- An HTML attachment was scrubbed... URL: From gsswzt at pku.edu.cn Thu Apr 12 12:19:35 2018 From: gsswzt at pku.edu.cn (gsswzt at pku.edu.cn) Date: Thu, 12 Apr 2018 20:19:35 +0800 Subject: [ovirt-users] Some questions about Ovirt REST API References: <2018041114193731867221@pku.edu.cn>, <4d18e637-e8a3-1cff-d24a-c89ef623a29d@redhat.com>, <2018041216141602964044@pku.edu.cn>, <7691fba8-01ed-6fef-7afc-97a504f2374f@redhat.com>, <2018041216452168103048@pku.edu.cn> Message-ID: <2018041220193450111060@pku.edu.cn> Here is my patches. From: gsswzt at pku.edu.cn Date: 2018-04-12 16:45 To: omachace; users Subject: Re: Re: [ovirt-users] Some questions about Ovirt REST API Sure. I override get() and add() in my BackendVmMytestsResource.java GET works and POST not. From: Ondra Machacek Date: 2018-04-12 16:25 To: gsswzt at pku.edu.cn; users Subject: Re: [ovirt-users] Some questions about Ovirt REST API Ah sorry, POST isn't working and GET works, I misread it. Can you please share the generated file: {project_path}/backend/manager/modules/restapi/interface/definition/target/generated-sources/model/org/ovirt/engine/api/resource/VmMytestResource.java Maybe you can even send patches to review as draft for start, we could better understand the patch then. On 04/12/2018 10:14 AM, gsswzt at pku.edu.cn wrote: > Do you mean /@override/ /getMytestsResource() / in BackendVmResource ? > I have done that, otherwise GET would not pass. > > *From:* Ondra Machacek > *Date:* 2018-04-12 15:43 > *To:* gsswzt at pku.edu.cn ; users > > *Subject:* Re: [ovirt-users] Some questions about Ovirt REST API > On 04/11/2018 08:19 AM, gsswzt at pku.edu.cn wrote: > > Hi, > > > > I wants to creating my own service under > ../vms/{vmid}/myservice.Here is > > my methods: > > > > 1. create VmMytestService in > > /https://github.com/oVirt/ovirt-engine-api-model project./ > > add/@Service VmMytestService mytests() in /VmService .java > > 2. mvn install it and change the root pom.xml > > /4.3.9-SNAPSHOT / in my Ovirt project. > > 3.create BackendVmMytestService implements VmMytestResource > Did you also in BackendVmResource implemented 'mytests' method? > > 4.override /get() and add() /methods. > > > > After that, I use /curl/ tool to send GET and POST request. GET is > > working and return. > > However, I get this return after POST request. > > > > Would you help me with that issue? > > > > Thanks, > > wenzt > > > > > > _______________________________________________ > > Users mailing list > > Users at ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: mytests-api-model.patch Type: application/octet-stream Size: 5165 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: mytests-ovirt-project.patch Type: application/octet-stream Size: 6946 bytes Desc: not available URL: From dholler at redhat.com Thu Apr 12 14:20:13 2018 From: dholler at redhat.com (Dominik Holler) Date: Thu, 12 Apr 2018 16:20:13 +0200 Subject: [ovirt-users] admin account constantly gets locked In-Reply-To: References: <9936BF6BA7EAF843AAB3A4ECC0FBB3ABE7DEB1@ExchangePBR.GemPbr.local> Message-ID: <20180412162013.06db586b@t460p> On Thu, 12 Apr 2018 13:57:45 +0200 Martin Perina wrote: > On Thu, Apr 12, 2018 at 1:04 PM, Martin Perina > wrote: > > > > > > > On Thu, Apr 12, 2018 at 12:44 PM, Eitan Raviv > > wrote: > >> The recurring denied access for every SyncNetworkProvider might be > >> because you changed the admin password on the engine but not on the > >> provider. > >> > >> Dominik, will updating to the same password on the provider solve > >> the denied access? > >> Martin, does the engine lock out the admin user for failed retries? > >> > > > > ?Of course, after 5 incorrect logins the account is locked. But I > > looked at logs and I can't see any login errors, so currently > > trying to reproduce to find out what's going on ... > > > > ?OK, so confirmed. If you change password for admin at internal using > aaa-jdbc-tool and you don't change immediately for OVN provider, then > admin at interal account is locked. > > We should probably change logic in OVN provider to shutdown the OVN > provider service if authentication failure to engine is raised. Using > this we will break OVN provider, but > it seems to me much less severe than locking admin at internal account. > Dominik, what do you think? > ? If we would shutdown the provider an authentication failure, and engine's admin has no access to engine's host super user shell, there is no way to recover for engine's admin. Even the authentication failure might be triggered from outside oVirt engine, shutting down the provider will disable the start of VMs with OVN networks. What is you opinion about the approach if the request comes from inside engine, e.g. by SyncNetworkProviderCommand or other operations, the provider object inside engine would be marked as invalid on authentication error and block all interaction until the credentials is updated? > > > > ? > > > > > >> > >> > >> HTH > >> > >> > >> On Thu, Apr 12, 2018 at 12:29 PM, K?fer Marcel < > >> marcel.kaefer at putzbrunn.de> wrote: > >> > >>> Here are the logfiles? > >>> > >>> > >>> > >>> Thanks > >>> > >>> > >>> > >>> *Von:* Eitan Raviv [mailto:eraviv at redhat.com] > >>> *Gesendet:* Donnerstag, 12. April 2018 11:12 > >>> *An:* K?fer Marcel > >>> *Cc:* users at ovirt.org; Martin Perina > >>> *Betreff:* Re: [ovirt-users] admin account constantly gets locked > >>> > >>> > >>> > >>> The sync network command is probably unrelated. > >>> > >>> Can you attach the full engine and the setup logs? > >>> > >>> Martin, this looks a bit like [1]. Any idea? > >>> > >>> Thanks > >>> > >>> > >>> > >>> [1] https://bugzilla.redhat.com/show_bug.cgi?id=1410955 > >>> > >>> > >>> > >>> On Thu, Apr 12, 2018 at 10:22 AM, K?fer Marcel < > >>> marcel.kaefer at putzbrunn.de> wrote: > >>> > >>> Hello, > >>> > >>> a few days ago I installed an ovirt-engine 4.2.2.6 following the > >>> steps of the documentation. After the installation I logged in to > >>> the admin page, configured a datadomain and changed the admin > >>> password. After a few hours I tried to login again, using the new > >>> password and got "Unable to log in because the user account is > >>> disabled or locked. Contact the system administrator." So I > >>> unlocked the admin account from the shell using > >>> "ovirt-aaa-jdbc-tool user unlock admin" which worked fine and I > >>> was able to continue working till the next login. > >>> > >>> I traced the /var/log/ovirt-engine/engine.log and found this after > >>> unlocking the admin account again. > >>> > >>> 2018-04-12 09:06:19,984+02 INFO [org.ovirt.engine.core.bll.pro > >>> vider.network.SyncNetworkProviderCommand] > >>> (EE-ManagedThreadFactory-engineScheduled-Thread-87) [2ed5aa42] > >>> Lock Acquired to object > >>> 'EngineLock:{exclusiveLocks='[ e37c0b9e-09bc-4893-9b0c-c70f56d6ecfc=PROVIDER]', > >>> sharedLocks=''}' 2018-04-12 09:06:19,991+02 INFO > >>> [org.ovirt.engine.core.bll.pro > >>> vider.network.SyncNetworkProviderCommand] > >>> (EE-ManagedThreadFactory-engineScheduled-Thread-87) [2ed5aa42] > >>> Running command: SyncNetworkProviderCommand internal: true. > >>> 2018-04-12 09:06:20,102+02 INFO > >>> [org.ovirt.engine.extension.aaa.jdbc.core.Authentication] > >>> (default task-239) [] locking user: admin due to interval > >>> failures 2018-04-12 09:06:25,046+02 ERROR > >>> [org.ovirt.engine.core.sso.utils.SsoUtils] (default task-239) [] > >>> OAuthException access_denied: Cannot authenticate user > >>> 'admin at internal': The username or password is incorrect.. > >>> 2018-04-12 09:06:25,049+02 ERROR [org.ovirt.engine.core.bll.pro > >>> vider.network.SyncNetworkProviderCommand] > >>> (EE-ManagedThreadFactory-engineScheduled-Thread-87) [2ed5aa42] > >>> Command 'org.ovirt.engine.core.bll.pro > >>> vider.network.SyncNetworkProviderCommand' failed: > >>> EngineException: (Failed with error Unauthorized and code 5050) > >>> 2018-04-12 09:06:25,050+02 INFO [org.ovirt.engine.core.bll.pro > >>> vider.network.SyncNetworkProviderCommand] > >>> (EE-ManagedThreadFactory-engineScheduled-Thread-87) [2ed5aa42] > >>> Lock freed to object > >>> 'EngineLock:{exclusiveLocks='[ e37c0b9e-09bc-4893-9b0c-c70f56d6ecfc=PROVIDER]', > >>> sharedLocks=''}' > >>> > >>> It seems like the SyncNetworkProviderCommand is somehow locking > >>> the admin account. I already restarted the whole machine but it > >>> didn't help. > >>> > >>> Can someone please point me in the right direction, where to find > >>> the error? > >>> > >>> Thanks in advance > >>> > >>> > >>> _______________________________________________ > >>> Users mailing list > >>> Users at ovirt.org > >>> http://lists.ovirt.org/mailman/listinfo/users > >>> > >>> > >>> > >>> > >>> -- > >>> > >>> Eitan Raviv > >>> IRC: erav (#ovirt #vdsm #devel #rhev-dev) > >>> > >> > >> > >> > >> -- > >> Eitan Raviv > >> IRC: erav (#ovirt #vdsm #devel #rhev-dev) > >> > > > > > > > > -- > > Martin Perina > > Associate Manager, Software Engineering > > Red Hat Czech s.r.o. > > > > > From lveyde at redhat.com Thu Apr 12 14:21:41 2018 From: lveyde at redhat.com (Lev Veyde) Date: Thu, 12 Apr 2018 17:21:41 +0300 Subject: [ovirt-users] [ANN] oVirt 4.2.3 First Release Candidate is now available Message-ID: The oVirt Project is pleased to announce the availability of the oVirt 4.2.3 First Release Candidate, as of April 12th, 2018 This update is a release candidate of the third in a series of stabilization updates to the 4.2 series. This is pre-release software. This pre-release should not to be used in production. This release is available now for: * Red Hat Enterprise Linux 7.4 or later * CentOS Linux (or similar) 7.4 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.4 or later * CentOS Linux (or similar) 7.4 or later * oVirt Node 4.2 See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available - oVirt Node is available [2] Additional Resources: * Read more about the oVirt 4.2.3 release highlights: http://www.ovirt.org/release/4. 2 . 3 / * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4. 2 . 3 / [2] http://resources.ovirt.org/pub/ovirt-4. 2 -pre /iso/ -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel lev at redhat.com | lveyde at redhat.com TRIED. TESTED. TRUSTED. -------------- next part -------------- An HTML attachment was scrubbed... URL: From stefanos at prismatelecomtesting.com Thu Apr 12 16:26:17 2018 From: stefanos at prismatelecomtesting.com (Stefano Stagnaro) Date: Thu, 12 Apr 2018 18:26:17 +0200 Subject: [ovirt-users] Frequent vm migration failure Message-ID: <1523550377.6503.5.camel@prismatelecomtesting.com> Hi, I recently upgraded an oVirt deployment from 3.6 to 4.0 and then 4.1.9 (my actual release). Since then, when migrating many hosts simultaneously I always experience few migrations failure like 1 on 10 vms. The failure can occur on any host; moreover, after a couple of failure the destination host fall in Error status and I have to manually re-activate or wait 30 min. Tipical error found on vdsm log is (from the source host): 2018-04-12 17:01:32,097+0200 ERROR (migsrc/3192dfe7) [virt.vm] (vmId='3192dfe7-eeac-4626-8c86-e49facc9006f') migration destination error: Fatal error during migration (migration:287) Please find the logs of source host (v15.ovirt), destination host (v14.ovirt) and engine here: https://www.dropbox.com/sh/xhf8ry4ih40poxd/AABxiFCIxDe14HSx2DqLE61ya?dl=0 Some of the vm affected from the migration failure are: svn 3192dfe7-eeac-4626-8c86-e49facc9006f wood a8e83ff0-dfed-4074-b6b6-e947b8ebb952 qnx66 5697c4a4-9e40-4dd6-aba2-c8ab9904a584 Thank you very much for your help. -- Stefano Stagnaro Prisma Telecom Testing S.r.l. Via Petrocchi, 4 20127 Milano ? Italy Tel. 02 26113507 int 339 e-mail: stefanos at prismatelecomtesting.com skype: stefano.stagnaro From plord at intricatenetworks.com Thu Apr 12 17:29:17 2018 From: plord at intricatenetworks.com (Zip) Date: Thu, 12 Apr 2018 11:29:17 -0600 Subject: [ovirt-users] how do you backup VM - Citrix Xen Migrate too! Message-ID: Hi Peter, Have a look at my solution here. https://github.com/zipurman/oVIRT_Simple_Backup Is a full backup solution and a migration utility from Xen(Citrix) to oVirt. Cheers Zip From: on behalf of Peter Hudec Organization: CNC, a.s. Reply-To: "phudec at cnc.sk" Date: Friday, April 6, 2018 at 5:53 AM To: users Subject: [ovirt-users] how do you backup VM Hi, one general question. See the $SUBJ. I have found https://github.com/openbacchus/bacchus, that good as start point, but still missing some features. i was thinking to contribute here, but first I want to known another solutions. regards Peter -- *Peter Hudec* Infra?trukt?rny architekt phudec at cnc.sk *CNC, a.s.* Borsk? 6, 841 04 Bratislava Recepcia: +421 2 35 000 100 Mobil:+421 905 997 203 *www.cnc.sk* _______________________________________________ Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users -------------- next part -------------- An HTML attachment was scrubbed... URL: From rmeggins at redhat.com Thu Apr 12 17:47:48 2018 From: rmeggins at redhat.com (Rich Megginson) Date: Thu, 12 Apr 2018 11:47:48 -0600 Subject: [ovirt-users] Engine reports In-Reply-To: <52546f65-87b8-ac5c-93e4-8ce8ba08878e@cnc.sk> References: <855bb1c1-33c7-d6ec-f513-5702bc2f736c@redhat.com> <4e975c4c-8492-c2c0-4649-75e1bf8a3163@redhat.com> <70243db2-b0e4-55f6-eef9-43a9f5f16c29@cnc.sk> <3be957c0-3667-cb3c-eb6a-d3e06600b597@redhat.com> <31bf3237-ab58-dcf3-8ce8-38dc9348dcc5@redhat.com> <52546f65-87b8-ac5c-93e4-8ce8ba08878e@cnc.sk> Message-ID: <67963bc8-87d7-c4cd-2839-c105790fdd8c@redhat.com> sudo ls -alrtF -Z /var/lib/elasticsearch oc logs logging-es-data-master-z6zbv4v2-2-deploy oc describe pod logging-es-data-master-z6zbv4v2-2-deploy sudo grep type=AVC /var/log/audit/audit.log | tail On 04/12/2018 02:32 AM, Peter Hudec wrote: > back to this issue. > > something went wrong ;( The status command got error. I'm not familiar > with openshift, so the log processing will took me a while. > > [PROD] root at dipostat01.cnc.sk: ~ # oc project logging > Already on project "logging" on server "https://metrics.ovirt.cnc.sk:8443". > [PROD] root at dipostat01.cnc.sk: ~ # oc adm policy add-scc-to-user > hostmount-anyuid \ >> system:serviceaccount:logging:aggregated-logging-elasticsearch > scc "hostmount-anyuid" added to: > ["system:serviceaccount:logging:aggregated-logging-elasticsearch"] > [PROD] root at dipostat01.cnc.sk: ~ # oc rollout cancel $( oc get -n > logging dc -l component=es -o name ) > No rollout is in progress (latest rollout #2 failed 3 days ago) > [PROD] root at dipostat01.cnc.sk: ~ # oc rollout latest $( oc get -n > logging dc -l component=es -o name ) > deploymentconfig "logging-es-data-master-z6zbv4v2" rolled out > [PROD] root at dipostat01.cnc.sk: ~ # oc rollout status -w $( oc get -n > logging dc -l component=es -o name ) > Waiting for rollout to finish: 0 of 1 updated replicas are available... > error: replication controller "logging-es-data-master-z6zbv4v2-3" has > failed progressing > > > [PROD] root at dipostat01.cnc.sk: ~ # oc get pods > NAME READY STATUS RESTARTS > AGE > logging-curator-1-c894f 1/1 Running 904 5d > logging-es-data-master-z6zbv4v2-2-deploy 0/1 Error 0 3d > logging-fluentd-x9vzs 1/1 Running 1 5d > logging-kibana-1-6bvvw 2/2 Running 2 5d > logging-mux-1-xxmdj 1/1 Running 1 5d > [PROD] root at dipostat01.cnc.sk: ~ # oc get pods > NAME READY STATUS RESTARTS > AGE > logging-curator-1-c894f 1/1 Running 904 5d > logging-es-data-master-z6zbv4v2-2-deploy 0/1 Error 0 3d > logging-fluentd-x9vzs 1/1 Running 1 5d > logging-kibana-1-6bvvw 2/2 Running 2 5d > logging-mux-1-xxmdj 1/1 Running 1 5d > [PROD] root at dipostat01.cnc.sk: ~ # oc get pods > NAME READY STATUS RESTARTS > AGE > logging-curator-1-c894f 1/1 Running 904 5d > logging-es-data-master-z6zbv4v2-2-deploy 0/1 Error 0 3d > logging-fluentd-x9vzs 1/1 Running 1 5d > logging-kibana-1-6bvvw 2/2 Running 2 5d > logging-mux-1-xxmdj 1/1 Running 1 5d > [PROD] root at dipostat01.cnc.sk: ~ # oc get svc > NAME TYPE CLUSTER-IP EXTERNAL-IP > PORT(S) AGE > logging-es ClusterIP 172.30.249.174 > 9200/TCP 5d > logging-es-cluster ClusterIP 172.30.114.201 > 9300/TCP 5d > logging-es-prometheus ClusterIP 172.30.203.113 > 443/TCP 5d > logging-kibana ClusterIP 172.30.29.192 > 443/TCP 5d > logging-mux ClusterIP 172.30.170.158 192.168.16.17 > 24284/TCP 5d > > > On 07/04/2018 01:09, Rich Megginson wrote: >> Great! >> >> On 04/06/2018 04:43 PM, Peter Hudec wrote: >>> Ansible playbook finished OK. The next step after weekend. >>> >>> ????thanks >>> ??????? Peter >>> >>> On 06/04/2018 23:34, Rich Megginson wrote: >>>> On 04/06/2018 03:08 PM, Peter Hudec wrote: >>>>> Hi, >>>>> >>>>> https://tools.apps.hudecof.net/paste/view/1d493d52 >>>>> >>>>> The difference is >>>>> - I used latest ansible 2.5 from PIPY source, since the RPM package do >>>>> not fit requirements >>>>> - I used GIT repo for openshift-ansible. >>>>> >>>>> I could start it over with the RPM based openshift-ansible >>>> I recommend that you start over with the RPM based openshift-ansible, >>>> which is what the instructions say, which is what I have tested >>>> >>>> alternately - if you want to go the more experimental route, you could >>>> enable the epel-testing yum repo - ansible-2.5 is in epel-testing which >>>> I've been told by the openshift-ansible guys should work >>>> >>>>> ?????Peter >>>>> >>>>> On 06/04/2018 20:23, Rich Megginson wrote: >>>>>> I'm assuming you are running on a CentOS7 machine, recently updated to >>>>>> the latest base packages. Please confirm. >>>>>> >>>>>> Please provide the output of the following commands: >>>>>> >>>>>> sudo yum repolist >>>>>> >>>>>> sudo rpm -q ansible >>>>>> >>>>>> sudo yum repoquery -i ansible >>>>>> >>>>>> sudo rpm -q openshift-ansible >>>>>> >>>>>> sudo yum repoquery -i openshift-ansible >>>>>> >>>>>> sudo rpm -q origin >>>>>> >>>>>> sudo yum repoquery -i origin >>>>>> >>>>>> sudo cat >>>>>> /usr/share/ansible/openshift-ansible/roles/lib_utils/callback_plugins/aa_version_requirement.py >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> sudo ls -alrtF /etc/origin/logging >>>>>> >>>>>> Please confirm that you followed the steps listed in the link below, >>>>>> including the use of the ansible inventory, vars.yaml.template, and >>>>>> repo >>>>>> files: >>>>>> https://github.com/richm/Main/blob/7e663351dc371b7895564072c7656ebfda45068d/README-install.md >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On 04/06/2018 03:19 AM, Peter Hudec wrote: >>>>>>> first issue is ansible version, could be solved by virtual env >>>>>>> >>>>>>> FATAL: Current Ansible version (2.4.2.0) is not supported. Supported >>>>>>> versions: 2.4.3.0 or newer >>>>>>> >>>>>>> yum install -y python-virtualenv >>>>>>> virtualenv ansible >>>>>>> . ./ansible/bin/activate >>>>>>> pip install -U pip setuptolls >>>>>>> pip install -U pip setuptools >>>>>>> pip install ansible >>>>>>> >>>>>>> >>>>>>> Second issue is a little bit strange for me >>>>>>> >>>>>>> 2018-04-06 10:00:30,264 p=68226 u=root |? Failure summary: >>>>>>> >>>>>>> >>>>>>> ???? 1. Hosts:??? localhost >>>>>>> ??????? Play:???? OpenShift Aggregated Logging >>>>>>> ??????? Task:???? pulling down signing items from host >>>>>>> ??????? Message:? ESC[0;31mAll items completedESC[0m >>>>>>> >>>>>>> I have found in logs >>>>>>> >>>>>>> 2018-04-06 10:00:28,356 p=68226 u=root |? failed: [localhost] >>>>>>> (item=ca.crl.srl) => { >>>>>>> ?????? "changed": false, >>>>>>> ?????? "invocation": { >>>>>>> ?????????? "module_args": { >>>>>>> ?????????????? "src": "/etc/origin/logging/ca.crl.srl" >>>>>>> ?????????? } >>>>>>> ?????? }, >>>>>>> ?????? "item": "ca.crl.srl", >>>>>>> ?????? "msg": "file not found: /etc/origin/logging/ca.crl.srl" >>>>>>> >>>>>>> >>>>>>> Is this good or bad ? >>>>>>> >>>>>>> ??????Peter >>>>>>> >>>>>>> On 05/04/2018 16:11, Rich Megginson wrote: >>>>>>>> Is it possible that you could start over from scratch, using the >>>>>>>> latest >>>>>>>> instructions/files at >>>>>>>> https://github.com/ViaQ/Main/pull/37/files? >>>>>>>> >>>>>>>> On 04/05/2018 07:19 AM, Peter Hudec wrote: >>>>>>>>> The version is from >>>>>>>>> >>>>>>>>> /usr/share/ansible/openshift-ansible/roles/openshift_facts/library/openshift_facts.py:get_openshift_version >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> [PROD] root at dipostat01.cnc.sk: >>>>>>>>> /usr/share/ansible/openshift-ansible # >>>>>>>>> /usr/bin/openshift version >>>>>>>>> openshift v3.10.0-alpha.0+f0186dd-401 >>>>>>>>> kubernetes v1.9.1+a0ce1bc657 >>>>>>>>> etcd 3.2.16 >>>>>>>>> >>>>>>>>> this binary is from the origin-3.7.2-1.el7.git.0.f0186dd.x86_64 >>>>>>>>> package >>>>>>>>> >>>>>>>>> [PROD] root at dipostat01.cnc.sk: ~ # rpm -qf /usr/bin/openshift >>>>>>>>> origin-3.7.2-1.el7.git.0.f0186dd.x86_64 >>>>>>>>> >>>>>>>>> Hmm, why the version do not match ? >>>>>>>>> >>>>>>>>> ???????Peter >>>>>>>>> >>>>>>>>> On 04/04/2018 17:41, Shirly Radco wrote: >>>>>>>>>> Hi, >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> I have a updated the installation instructions for installing >>>>>>>>>> OpenShift >>>>>>>>>> 3.9, based on Rich's work , for the oVirt use case. >>>>>>>>>> >>>>>>>>>> Please make sure where you get the 3.10 rpm and disable that repo. >>>>>>>>>> >>>>>>>>>> This is the PR that includes the metrics store installation of >>>>>>>>>> OpenShift 3.9 >>>>>>>>>> >>>>>>>>>> https://github.com/sradco/ovirt-site/blob/74f1e772c8ca75d4b9e57a3c02cce49c5030f7f7/source/develop/release-management/features/metrics/setting-up-viaq-logging.html.md >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> It should be merged soon, but you can use it to install. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Please make sure to add the?ansible-inventory-origin-39-aio >>>>>>>>>> file as >>>>>>>>>> described below. >>>>>>>>>> These are required parameters for the ansible playbook. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Best regards, >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> >>>>>>>>>> SHIRLY?RADCO >>>>>>>>>> >>>>>>>>>> BI SeNIOR SOFTWARE ENGINEER >>>>>>>>>> >>>>>>>>>> Red Hat?Israel >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> TRIED. TESTED. TRUSTED. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Wed, Apr 4, 2018 at 5:41 PM, Rich Megginson >>>>>>>>>> >>>>>>>>> > wrote: >>>>>>>>>> >>>>>>>>>> ??????? I'm sorry.? I misunderstood the request. >>>>>>>>>> >>>>>>>>>> ??????? We are in the process of updating the instructions for >>>>>>>>>> installing >>>>>>>>>> ??????? viaq logging based on upstream origin 3.9 - >>>>>>>>>> ??????? https://github.com/ViaQ/Main/pull/37 >>>>>>>>>> ??????? >>>>>>>>>> >>>>>>>>>> ??????? In the meantime, you can follow along on that PR, and >>>>>>>>>> we will >>>>>>>>>> have >>>>>>>>>> ??????? instructions very soon. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ??????? On 04/04/2018 08:26 AM, Rich Megginson wrote: >>>>>>>>>> >>>>>>>>>> ??????????? On 04/04/2018 08:22 AM, Shirly Radco wrote: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ??????????????? -- >>>>>>>>>> >>>>>>>>>> ??????????????? SHIRLY RADCO >>>>>>>>>> >>>>>>>>>> ??????????????? BI SeNIOR SOFTWARE ENGINEER >>>>>>>>>> >>>>>>>>>> ??????????????? Red Hat Israel >>>>>>>>>> >>>>>>>>>> ??????????????? >>>>>>>>>> ??????????????? TRIED. TESTED. TRUSTED. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ??????????????? On Wed, Apr 4, 2018 at 5:07 PM, Peter Hudec >>>>>>>>>> >>>>>>>>> ??????????????? >>>>>>>>> ??????????????? >> wrote: >>>>>>>>>> >>>>>>>>>> ??????????????? ??? almost the same issue, the versio for >>>>>>>>>> openshoft >>>>>>>>>> release >>>>>>>>>> ??????????????? changed to 3.9 >>>>>>>>>> >>>>>>>>>> ??????????????? ??? Failure summary: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ??????????????? ??? ? 1. Hosts:? ? localhost >>>>>>>>>> ??????????????? ??? ? ? ?Play:? ? ?Determine openshift_version to >>>>>>>>>> configure >>>>>>>>>> ??????????????? on first >>>>>>>>>> ??????????????? ??? master >>>>>>>>>> ??????????????? ??? ? ? ?Task:? ? ?For an RPM install, abort >>>>>>>>>> when the >>>>>>>>>> release >>>>>>>>>> ??????????????? ??? requested does >>>>>>>>>> ??????????????? ??? not match the available version. >>>>>>>>>> ??????????????? ??? ? ? ?Message:? You requested openshift_release >>>>>>>>>> 3.9, >>>>>>>>>> ??????????????? which is not >>>>>>>>>> ??????????????? ??? matched by >>>>>>>>>> ??????????????? ??? ? ? ? ? ? ? ? ?the latest OpenShift RPM we >>>>>>>>>> detected as >>>>>>>>>> ??????????????? origin-3.10.0 >>>>>>>>>> ??????????????? ??? ? ? ? ? ? ? ? ?on host localhost. >>>>>>>>>> ??????????????? ??? ? ? ? ? ? ? ? ?We will only install the latest >>>>>>>>>> RPMs, so >>>>>>>>>> ??????????????? please ensure >>>>>>>>>> ??????????????? ??? you are getting the release >>>>>>>>>> ??????????????? ??? ? ? ? ? ? ? ? ?you expect. You may need to >>>>>>>>>> adjust >>>>>>>>>> your >>>>>>>>>> ??????????????? Ansible >>>>>>>>>> ??????????????? ??? inventory, modify the repositories >>>>>>>>>> ??????????????? ??? ? ? ? ? ? ? ? ?available on the host, or >>>>>>>>>> run the >>>>>>>>>> ??????????????? appropriate OpenShift >>>>>>>>>> ??????????????? ??? upgrade playbook. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ??????????????? What is the rpm version installed of >>>>>>>>>> OpenShift?origin? >>>>>>>>>> ??????????????? Do you perhaps have another repo that includes the >>>>>>>>>> OpenShift >>>>>>>>>> ??????????????? origin-3.10.0? >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ??????????? origin is the upstream version of OpenShift, which is >>>>>>>>>> unsupported. >>>>>>>>>> >>>>>>>>>> ??????????? sudo repoquery -i origin >>>>>>>>>> >>>>>>>>>> ??????????? This will tell you which repo it came from >>>>>>>>>> >>>>>>>>>> ??????????? You will need to disable that repo and uninstall any >>>>>>>>>> packages >>>>>>>>>> ??????????? which came from that repo >>>>>>>>>> >>>>>>>>>> ??????????? Another mystery is why it is trying to install origin >>>>>>>>>> in the >>>>>>>>>> ??????????? first place.? openshift-ansible with >>>>>>>>>> ??????????? openshift_deployment_type=openshift-enterprise >>>>>>>>>> should not >>>>>>>>>> try to >>>>>>>>>> ??????????? install origin, it should install packages with names >>>>>>>>>> like >>>>>>>>>> ??????????? atomic-openshift-master, atomic-openshift-node, etc. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ??????????????? ??? On 04/04/2018 14:18, Shirly Radco wrote: >>>>>>>>>> ??????????????? ??? > Adding Nicolas since he hit the same issue. >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? > -- >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? > SHIRLY?RADCO >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? > BI SeNIOR SOFTWARE ENGINEER >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? > Red Hat?Israel >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? > TRIED. TESTED. TRUSTED. >>>>>>>>>> >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? > On Wed, Apr 4, 2018 at 3:17 PM, Shirly Radco >>>>>>>>>> ??????????????? >>>>>>>>>> ??????????????? >>>>>>>>> > >>>>>>>>>> ??????????????? ??? > >>>>>>>>> >>>>>>>>>> ??????????????? >>>>>>>>> >>> >>>>>>>>>> wrote: >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?Hi Peter, >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?The installation instructions currently >>>>>>>>>> support >>>>>>>>>> ??????????????? OpenShift 3.6. >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?I'm now working on updating them to >>>>>>>>>> support >>>>>>>>>> 3.9. >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?You currently have 3.10 installed. >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?Please install OpenShift 3.9 using this >>>>>>>>>> repository >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> >>>>>>>>>> https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>>> > >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> >>>>>>>>>> ????>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>>> >> >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?And add the following file to your vm >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?Run: >>>>>>>>>> ??????????????? ??? >? ? ?vi /root/ansible-inventory-origin-39-aio >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?Add: >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?-------------- >>>>>>>>>> ??????????????? ??? >? ? ?[OSEv3:children] >>>>>>>>>> ??????????????? ??? >? ? ?nodes >>>>>>>>>> ??????????????? ??? >? ? ?masters >>>>>>>>>> ??????????????? ??? >? ? ?etcd >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?[OSEv3:vars] >>>>>>>>>> ??????????????? ??? >? ? ?ansible_connection=local >>>>>>>>>> ??????????????? ??? >? ? ?openshift_release=v3.9 >>>>>>>>>> ??????????????? ??? >? ? ?openshift_logging_install_logging=true >>>>>>>>>> ??????????????? ??? >? ? ?short_version=3.9 >>>>>>>>>> ??????????????? ??? >? ? ?openshift_deployment_type=origin >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> >>>>>>>>>> ??openshift_master_identity_providers=[{'mappingMethod': >>>>>>>>>> ??????????????? 'lookup', >>>>>>>>>> ??????????????? ??? >? ? ?'challenge': 'true', 'login': 'true', >>>>>>>>>> 'kind': >>>>>>>>>> ??????????????? ??? >? ? ?'AllowAllPasswordIdentityProvider', >>>>>>>>>> 'name': >>>>>>>>>> ??????????????? 'allow_all'}] >>>>>>>>>> ??????????????? ??? >? ? ?# bug - doesn't use correct tag >>>>>>>>>> ??????????????? ??? >? ? ?openshift_logging_image_version=v3.9 >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> >>>>>>>>>> ???openshift_logging_elasticsearch_proxy_image_version=v1.0.0 >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?openshift_logging_es_allow_external=True >>>>>>>>>> ??????????????? ??? >? ? ?openshift_logging_use_mux=True >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ?openshift_logging_mux_allow_external=True >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ????openshift_logging_mux_file_buffer_storage_type=hostmount >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ????openshift_logging_elasticsearch_storage_type=hostmount >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> >>>>>>>>>> ????openshift_logging_elasticsearch_hostmount_path=/var/lib/elasticsearch >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?[nodes] >>>>>>>>>> ??????????????? ??? >? ? ?localhost storage=True >>>>>>>>>> ??????????????? openshift_node_labels="{'region': >>>>>>>>>> ??????????????? ??? 'infra'}" >>>>>>>>>> ??????????????? ??? >? ? ?openshift_schedulable=True >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?[masters] >>>>>>>>>> ??????????????? ??? >? ? ?localhost storage=True >>>>>>>>>> ??????????????? openshift_node_labels="{'region': >>>>>>>>>> ??????????????? ??? 'infra'}" >>>>>>>>>> ??????????????? ??? >? ? ?openshift_schedulable=True >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?[etcd] >>>>>>>>>> ??????????????? ??? >? ? ?localhost storage=True >>>>>>>>>> ??????????????? openshift_node_labels="{'region': >>>>>>>>>> ??????????????? ??? 'infra'}" >>>>>>>>>> ??????????????? ??? >? ? ?openshift_schedulable=True >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?------------ >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?Save and exit. >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?***Please make sure that you use /var as >>>>>>>>>> your >>>>>>>>>> ??????????????? Elasticsearch >>>>>>>>>> ??????????????? ??? >? ? ?persistent storage directory. >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?And when you run the OpenShift ansible >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> >>>>>>>>>> ????(https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> > >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> >>>>>>>>>> ????>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>) >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ??????????????? ??? >? ? ?use the file you just created like this: >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?# cd >>>>>>>>>> /usr/share/ansible/openshift-ansible >>>>>>>>>> ??????????????? ??? >? ? ?# (or wherever you cloned the git >>>>>>>>>> repo if >>>>>>>>>> using git) >>>>>>>>>> ??????????????? ??? >? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log >>>>>>>>>> ansible-playbook >>>>>>>>>> ??????????????? -vvv -e >>>>>>>>>> ??????????????? ??? >? ? ?@/root/vars.yaml -i >>>>>>>>>> ??????????????? /root/*ansible-inventory-origin-39-aio* >>>>>>>>>> ??????????????? ??? >? ? ?playbooks/byo/config.yml >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?Best regards, >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?-- >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?SHIRLY?RADCO >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?BI SeNIOR SOFTWARE ENGINEER >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?Red Hat?Israel >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ? >>>>>>>>>> ??????????????? ??? >? ? ?TRIED. TESTED. TRUSTED. >>>>>>>>>> >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ?On Wed, Apr 4, 2018 at 12:17 PM, Peter >>>>>>>>>> Hudec >>>>>>>>>> ??????????????? >>>>>>>>>> >>>>>>>>> ??????????????? > >>>>>>>>>> ??????????????? ??? >? ? ?>>>>>>>>> >>>>>>>>>> ??????????????? >>> >>>>>>>>>> wrote: >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ? ? ?Tried to install ovirt metrics, >>>>>>>>>> but got >>>>>>>>>> error >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log >>>>>>>>>> ??????????????? ansible-playbook -vvv -e >>>>>>>>>> ??????????????? ??? >? ? ? ? ?@/root/vars.yaml -i >>>>>>>>>> ??????????????? /root/ansible-inventory-origin-37-aio >>>>>>>>>> ??????????????? ??? >? ? ? ? ?playbooks/byo/config.yml >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ? ? ?? 1. Hosts:? ? localhost >>>>>>>>>> ??????????????? ??? >? ? ? ? ?? ? ?Play:? ? ?Determine >>>>>>>>>> openshift_version to >>>>>>>>>> ??????????????? configure >>>>>>>>>> ??????????????? ??? on first >>>>>>>>>> ??????????????? ??? >? ? ? ? ?master >>>>>>>>>> ??????????????? ??? >? ? ? ? ?? ? ?Task:? ? ?For an RPM install, >>>>>>>>>> abort when >>>>>>>>>> ??????????????? the release >>>>>>>>>> ??????????????? ??? >? ? ? ? ?requested does >>>>>>>>>> ??????????????? ??? >? ? ? ? ?not match the available version. >>>>>>>>>> ??????????????? ??? >? ? ? ? ?? ? ?Message:? You requested >>>>>>>>>> openshift_release >>>>>>>>>> ??????????????? 3.7, >>>>>>>>>> ??????????????? ??? which is not >>>>>>>>>> ??????????????? ??? >? ? ? ? ?matched by >>>>>>>>>> ??????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?the latest OpenShift >>>>>>>>>> RPM we >>>>>>>>>> ??????????????? detected as >>>>>>>>>> ??????????????? ??? origin-3.10.0 >>>>>>>>>> ??????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?on host localhost. >>>>>>>>>> ??????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?We will only >>>>>>>>>> install the >>>>>>>>>> latest >>>>>>>>>> ??????????????? RPMs, so >>>>>>>>>> ??????????????? ??? please >>>>>>>>>> ??????????????? ??? >? ? ? ? ?ensure >>>>>>>>>> ??????????????? ??? >? ? ? ? ?you are getting the release >>>>>>>>>> ??????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?you expect. You may >>>>>>>>>> need to >>>>>>>>>> ??????????????? adjust your >>>>>>>>>> ??????????????? ??? Ansible >>>>>>>>>> ??????????????? ??? >? ? ? ? ?inventory, modify the repositories >>>>>>>>>> ??????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?available on the >>>>>>>>>> host, >>>>>>>>>> or run >>>>>>>>>> ??????????????? the appropriate >>>>>>>>>> ??????????????? ??? >? ? ? ? ?OpenShift >>>>>>>>>> ??????????????? ??? >? ? ? ? ?upgrade playbook. >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ? ? ?? ? ? ? regards >>>>>>>>>> ??????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ? Peter >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ? ? ?On 04/04/2018 09:13, Fred Rolland >>>>>>>>>> wrote: >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> Hi, >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> Check these links: >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> >>>>>>>>>> https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>>> > >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> >>>>>>>>>> ????>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>>> >> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> >>>>>>>>>> https://ovirt.org/develop/release-management/features/metrics/metrics-store/ >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> > >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> >>>>>>>>>> ????>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> Regards, >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> Fred >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> On Tue, Apr 3, 2018 at 9:38 AM, >>>>>>>>>> Anantha >>>>>>>>>> Raghava >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>> ??????????????? >>>>>>>>>> ??????????????? ??? >>>>>>>>> ??????????????? > >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ?>>>>>>>>> ??????????????? >>>>>>>>>> ??????????????? ??? >>>>>>>>> ??????????????? >> >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ?>>>>>>>>> ??????????????? >>>>>>>>>> ??????????????? ??? >>>>>>>>> ??????????????? > >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ?>>>>>>>>> ??????????????? >>>>>>>>>> ??????????????? ??? >>>>>>>>> ??????????????? >>>> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> wrote: >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?>? ? ?Hi, >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?>? ? ?I see that oVirt DWH is >>>>>>>>>> installed >>>>>>>>>> with >>>>>>>>>> ??????????????? Version >>>>>>>>>> ??????????????? ??? 4.2.x. Now, how do I >>>>>>>>>> ??????????????? ??? >? ? ? ? ?>? ? ?take the reports? I version >>>>>>>>>> 3.5, >>>>>>>>>> we had >>>>>>>>>> ??????????????? Jasper >>>>>>>>>> ??????????????? ??? reports module using >>>>>>>>>> ??????????????? ??? >? ? ? ? ?>? ? ?which we could take >>>>>>>>>> utilization >>>>>>>>>> reports. >>>>>>>>>> ??????????????? Can we do >>>>>>>>>> ??????????????? ??? something similar >>>>>>>>>> ??????????????? ??? >? ? ? ? ?>? ? ?here? >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?>? ? ?-- >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?>? ? ?Thanks & Regards, >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?>? ? ?Anantha Raghava >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?>? ? ?Do not print this e-mail >>>>>>>>>> unless >>>>>>>>>> ??????????????? required. Save >>>>>>>>>> ??????????????? ??? Paper & trees. >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ????_______________________________________________ >>>>>>>>>> ??????????????? ??? >? ? ? ? ?>? ? ?Users mailing list >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> Users at ovirt.org >>>>>>>>>> >>>>>>>>>> ??????????????? > >>>>>>>>>> ??????????????? ??? >>>>>>>>> >>>>>>>>>> ??????????????? >> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?>>>>>>>>> ??????????????? >>>>>>>>> ??????????????? > >>>>>>>>>> ??????????????? ??? >>>>>>>>> >>>>>>>>>> ??????????????? >>>>>>>>> >>> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>>> ??????????????? >>>>>>>>>> ??????????????? ??? >>>>>>>>> ??????????????? > >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ?>>>>>>>>> ??????????????? >>>>>>>>>> ??????????????? ??? >>>>>>>>> ??????????????? >> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? ?>>>>>>>>> ??????????????? >>>>>>>>>> ??????????????? ??? >>>>>>>>> ??????????????? > >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ?>>>>>>>>> ??????????????? >>>>>>>>>> ??????????????? >>>>>>>>> ??????????????? >>> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> _______________________________________________ >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> Users mailing list >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> Users at ovirt.org >>>>>>>>>> >>>>>>>>>> ??????????????? > >>>>>>>>>> ??????????????? ??? >>>>>>>>> >>>>>>>>>> ??????????????? >> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>>> ??????????????? >>>>>>>>>> ??????????????? ??? >>>>>>>>> ??????????????? > >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ?>>>>>>>>> ??????????????? >>>>>>>>>> ??????????????? ??? >>>>>>>>> ??????????????? >> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ? ? ?-- >>>>>>>>>> ??????????????? ??? >? ? ? ? ?*Peter Hudec* >>>>>>>>>> ??????????????? ??? >? ? ? ? ?Infra?trukt?rny architekt >>>>>>>>>> ??????????????? ??? > phudec at cnc.sk >>>>>>>>>> ??????????????? > >>>>>>>>>> ??????????????? >>>>>>>>>> ??????????????? ??? >> >>>>>>>>>> ??????????????? >>>>>>>>>> ??????????????? > >>>>>>>>>> ??????????????? ??? >?????? ?>>>>>>>>> >>>>>>>>>> ??????????????? >>> >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ? ? ?*CNC,?a.s.* >>>>>>>>>> ??????????????? ??? >? ? ? ? ?Borsk? 6,?841 04 Bratislava >>>>>>>>>> ??????????????? ??? >? ? ? ? ?Recepcia:?+421 2? 35 000 100 >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? >? ? ? ? ?Mobil:+421?905 997 203 >>>>>>>>>> ??????????????? ??? >? ? ? ? ?*www.cnc.sk >>>>>>>>>> ??????????????? * >>>>>>>>>> ??????????????? ??? >>>>>>>>>> >>>>>>>>>> ??????????????? ??? >? ? ? ? ?> >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ????_______________________________________________ >>>>>>>>>> ??????????????? ??? >? ? ? ? ?Users mailing list >>>>>>>>>> ??????????????? ??? > Users at ovirt.org >>>>>>>>>> ??????????????? > >>>>>>>>>> ??????????????? >>>>>>>>>> ??????????????? ??? >>>>>>>>> >> >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>>> ??????????????? >>>>>>>>>> ??????????????? ??? >>>>>>>>> ??????????????? > >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ?>>>>>>>>> ??????????????? >>>>>>>>>> ??????????????? ??? >>>>>>>>> ??????????????? >> >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ??????????????? ??? -- >>>>>>>>>> ??????????????? ??? *Peter Hudec* >>>>>>>>>> ??????????????? ??? Infra?trukt?rny architekt >>>>>>>>>> ??????????????? ??? phudec at cnc.sk >>>>>>>>>> ??????????????? > >>>>>>>>>> ??????????????? >>>>>>>>>> ??????????????? ??? >> >>>>>>>>>> >>>>>>>>>> ??????????????? ??? *CNC,?a.s.* >>>>>>>>>> ??????????????? ??? Borsk? 6,?841 04 Bratislava >>>>>>>>>> ??????????????? ??? Recepcia:?+421 2? 35 000 100 >>>>>>>>>> >>>>>>>>>> ??????????????? ??? Mobil:+421?905 997 203 >>>>>>>>>> ??????????????? ??? *www.cnc.sk >>>>>>>>>> * >>>>>>>>>> ??????????????? >>>>>>>>>> ??????????????? ??? > >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> > From chad at talkjesus.com Thu Apr 12 17:33:20 2018 From: chad at talkjesus.com (Talk Jesus) Date: Thu, 12 Apr 2018 13:33:20 -0400 Subject: [ovirt-users] New Install Issues Message-ID: <053701d3d284$5a110fe0$0e332fa0$@talkjesus.com> Having some strange issues. First: Admin panel loads very slow using subdomain.mydomain.com However, this is a brand new server with 64GB RAM, SSD disks and dual octo core Xeons. Second: I get this. [ INFO ] Stage: Setup validation [WARNING] Cannot validate host name settings, reason: resolved host does not match any of the local addresses During execution engine service will be stopped (OK, Cancel) [OK]: Third: when admin panel finally loads, I use admin at internal plus my root password set during installation setup. I get this: Unable to log in. Verify your login information or contact the system administrator. --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus From michal.skrivanek at redhat.com Thu Apr 12 18:20:29 2018 From: michal.skrivanek at redhat.com (Michal Skrivanek) Date: Thu, 12 Apr 2018 20:20:29 +0200 Subject: [ovirt-users] Frequent vm migration failure In-Reply-To: <1523550377.6503.5.camel@prismatelecomtesting.com> References: <1523550377.6503.5.camel@prismatelecomtesting.com> Message-ID: <4FA82C16-954E-4AFC-AA4F-71E9D1C951D9@redhat.com> > On 12 Apr 2018, at 18:26, Stefano Stagnaro wrote: > > Hi, > > I recently upgraded an oVirt deployment from 3.6 to 4.0 and then 4.1.9 (my actual release). Since then, when migrating many hosts simultaneously I always experience few migrations failure like 1 on 10 vms. The failure can occur on any host; moreover, after a couple of failure the destination host fall in Error status and I have to manually re-activate or wait 30 min. > > Tipical error found on vdsm log is (from the source host): > 2018-04-12 17:01:32,097+0200 ERROR (migsrc/3192dfe7) [virt.vm] (vmId='3192dfe7-eeac-4626-8c86-e49facc9006f') migration destination error: Fatal error during migration (migration:287) > > Please find the logs of source host (v15.ovirt), destination host (v14.ovirt) and engine here: https://www.dropbox.com/sh/xhf8ry4ih40poxd/AABxiFCIxDe14HSx2DqLE61ya?dl=0 > > Some of the vm affected from the migration failure are: > svn 3192dfe7-eeac-4626-8c86-e49facc9006f > wood a8e83ff0-dfed-4074-b6b6-e947b8ebb952 > qnx66 5697c4a4-9e40-4dd6-aba2-c8ab9904a584 can you also include qemu log from /var/log/libvirt/qemu/? btw you seem to be using the legacy migration policy throttling the speed significantly. Please read into the migration enhancements in 4.0 https://www.ovirt.org/develop/release-management/features/virt/migration-enhancements/ Thanks, michal > > Thank you very much for your help. > > -- > Stefano Stagnaro > > Prisma Telecom Testing S.r.l. > Via Petrocchi, 4 > 20127 Milano ? Italy > > Tel. 02 26113507 int 339 > e-mail: stefanos at prismatelecomtesting.com > skype: stefano.stagnaro > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users -------------- next part -------------- An HTML attachment was scrubbed... URL: From awels at redhat.com Thu Apr 12 18:20:48 2018 From: awels at redhat.com (Alexander Wels) Date: Thu, 12 Apr 2018 14:20:48 -0400 Subject: [ovirt-users] New Install Issues In-Reply-To: <053701d3d284$5a110fe0$0e332fa0$@talkjesus.com> References: <053701d3d284$5a110fe0$0e332fa0$@talkjesus.com> Message-ID: <3490929.0WSgpygIPA@awels> On Thursday, April 12, 2018 1:33:20 PM EDT Talk Jesus wrote: > Having some strange issues. > > First: Admin panel loads very slow using subdomain.mydomain.com > > However, this is a brand new server with 64GB RAM, SSD disks and dual octo > core Xeons. > > Second: I get this. > > [ INFO ] Stage: Setup validation > [WARNING] Cannot validate host name settings, reason: resolved host does not > match any of the local addresses > During execution engine service will be stopped (OK, Cancel) [OK]: > > Third: when admin panel finally loads, I use admin at internal plus my root > password set during installation setup. I get this: > > Unable to log in. Verify your login information or contact the system > administrator. > This is highly likely a DNS issue, the engine tries to resolve itself and if it can't, it takes a long time to load the webadmin (Not sure why it does this, but fixing the DNS will fix the slow loading). > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users From michal.skrivanek at redhat.com Thu Apr 12 18:29:02 2018 From: michal.skrivanek at redhat.com (Michal Skrivanek) Date: Thu, 12 Apr 2018 20:29:02 +0200 Subject: [ovirt-users] Decrease downtime for HA In-Reply-To: <06c8eaf2-2eb1-8f28-4415-40f39bd900c9@hhi.fraunhofer.de> References: <70878a1e-04f1-8241-b2d8-d9474893538b@hhi.fraunhofer.de> <0FFA46D6-66F7-4CE8-A200-DF3CDFD0F8FE@redhat.com> <4a4276c3-0a16-98c2-e50a-7491ca00c94d@hhi.fraunhofer.de> <585D25A6-78B5-4416-BA44-7BFE91869077@redhat.com> <1c7f3633-258f-0365-443e-6389b77c7ad4@hhi.fraunhofer.de> <06c8eaf2-2eb1-8f28-4415-40f39bd900c9@hhi.fraunhofer.de> Message-ID: <66C98419-3DE3-42CA-B03A-45038BFB10F4@redhat.com> > On 12 Apr 2018, at 13:13, Daniel Menzel wrote: > > Hi there, > > does anyone have an idea how to decrease a virtual machine's downtime? > > Best > Daniel > > On 06.04.2018 13:34, Daniel Menzel wrote: >> Hi Michal, >> >> Hi Daniel, adding Martin to review fencing behavior >> (sorry for misspelling your name in my first mail). >> >> that?s not the reason I?m replying late!:-)) >> The settings for the VMs are the following (oVirt 4.2): >> >> HA checkbox enabled of course >> "Target Storage Domain for VM Lease" -> left empty if you need faster reactions then try to use VM Leases as well, it won?t make a difference in this case but will help in case of network issues. E.g. if you use iSCSI and the storage connection breaks while host connection still works it would restart the VM in about 80s; otherwise it would take >5 mins. >> "Resume Behavior" -> AUTO_RESUME >> Priority for Migration -> High >> "Watchdog Model" -> No-Watchdog >> For testing we did not kill any VM but the host. So basically we simulated an instantaneous crash by manually turning the machine off via IPMI-Interface (not via operating system!) and ping the guest(s). What happens then? >> >> 2-3 seconds after the we press the host's shutdown button we lose ping contact to the VM(s). >> After another 20s oVirt changes the host's status to "connecting", the VM's status is set to a question mark. >> After ~1:30 the host is flagged to "non responsive? that sounds about right. Now fencing action should have been initiated, if you can share the engine logs we can confirm that. IIRC we first try soft fencing - try to ssh to that host, that might take some time to time out I guess. Martin? >> After ~2:10 the host's reboot is initiated by oVirt, 5-10s later the guest is back online. >> So, there seems to be one mistake I made in the first mail: The downtime is "only" 2.5min. But still I think this time can be decreased as for some services it is still quite a long time. >> >> these values can be tuned down, but then you may be more susceptible to fencing power cycling a host in case of shorter network outages. It may be ok?depending on your requirements. >> Best >> Daniel >> >> On 06.04.2018 12:49, Michal Skrivanek wrote: >>>> On 6 Apr 2018, at 12:45, Daniel Menzel wrote: >>>> >>>> Hi Michael, >>>> thanks for your mail. Sorry, I forgot to write that. Yes, we have power management and fencing enabled on all hosts. We also tested this and found out that it works perfectly. So this cannot be the reason I guess. >>> Hi Daniel, >>> ok, then it?s worth looking into details. Can you describe in more detail what happens? What exact settings you?re using for such VM? Are you killing the HE VM or other VMs or both? Would be good to narrow it down a bit and then review the exact flow >>> >>> Thanks, >>> michal >>> >>>> Daniel >>>> >>>> >>>> >>>> On 06.04.2018 11:11, Michal Skrivanek wrote: >>>>>> On 4 Apr 2018, at 15:36, Daniel Menzel wrote: >>>>>> >>>>>> Hello, >>>>>> >>>>>> we're successfully using a setup with 4 Nodes and a replicated Gluster for storage. The engine is self hosted. What we're dealing with at the moment is the high availability: If a node fails (for example simulated by a forced power loss) the engine comes back up online withing ~2min. But guests (having the HA option enabled) come back online only after a very long grace time of ~5min. As we have a reliable network (40 GbE) and reliable servers I think that the default grace times are way too high for us - is there any possibility to change those values? >>>>> And do you have Power Management(iLO, iDRAC,etc) configured for your hosts? Otherwise we have to resort to relatively long timeouts to make sure the host is really dead >>>>> Thanks, >>>>> michal >>>>>> Thanks in advance! >>>>>> Daniel >>>>>> >>>>>> _______________________________________________ >>>>>> Users mailing list >>>>>> Users at ovirt.org >>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>> >>>>>> >> >> >> >> _______________________________________________ >> Users mailing list >> Users at ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users -------------- next part -------------- An HTML attachment was scrubbed... URL: From Matthew.Young3 at bp.com Thu Apr 12 16:51:26 2018 From: Matthew.Young3 at bp.com (Young, Matthew (Numerical Algorithms Group)) Date: Thu, 12 Apr 2018 16:51:26 +0000 Subject: [ovirt-users] ansible failure during host install Message-ID: Hello all, I have been working on adding a new host to an oVirt cluster. The installation is failing in the ansible portion, specifically installing the ansible elasticsearch ca cert. I have no experience with ansible. Does anyone know what is causing this issue? Or how to create this ca cert? **** from ansible log**** ... 2018-04-12 09:32:18,114 p=56616 u=ovirt | TASK [oVirt.ovirt-fluentd/fluentd-setup : Create fluentd.conf] ***************** 2018-04-12 09:32:18,730 p=56616 u=ovirt | ok: [10.222.10.156] => { "changed": false, "checksum": "c9f88b60cd12ab8e3f3ffce1ae07654c89b06ef6", "gid": 0, "group": "root", "mode": "0640", "owner": "root", "path": "/etc/fluentd/fluent.conf", "secontext": "system_u:object_r:etc_t:s0", "size": 58, "state": "file", "uid": 0 } 2018-04-12 09:32:18,739 p=56616 u=ovirt | TASK [oVirt.ovirt-fluentd/fluentd-setup : Install fluentd certificate] ********* 2018-04-12 09:32:18,759 p=56616 u=ovirt | skipping: [10.222.10.156] => { "changed": false, "skip_reason": "Conditional result was False" } 2018-04-12 09:32:18,768 p=56616 u=ovirt | TASK [oVirt.ovirt-fluentd/fluentd-setup : Install fluentd elasticsearch CA certificate] *** 2018-04-12 09:32:18,810 p=56616 u=ovirt | fatal: [10.222.10.156]: FAILED! => { "changed": false } MSG: src (or content) is required 2018-04-12 09:32:18,812 p=56616 u=ovirt | PLAY RECAP ********************************************************************* 2018-04-12 09:32:18,812 p=56616 u=ovirt | 10.222.10.156 : ok=33 changed=4 unreachable=0 failed=1 ************ -------------- next part -------------- An HTML attachment was scrubbed... URL: From ykaul at redhat.com Thu Apr 12 20:57:08 2018 From: ykaul at redhat.com (Yaniv Kaul) Date: Thu, 12 Apr 2018 20:57:08 +0000 Subject: [ovirt-users] New Install Issues In-Reply-To: <3490929.0WSgpygIPA@awels> References: <053701d3d284$5a110fe0$0e332fa0$@talkjesus.com> <3490929.0WSgpygIPA@awels> Message-ID: On Thu, Apr 12, 2018, 9:21 PM Alexander Wels wrote: > On Thursday, April 12, 2018 1:33:20 PM EDT Talk Jesus wrote: > > Having some strange issues. > > > > First: Admin panel loads very slow using subdomain.mydomain.com > > > > However, this is a brand new server with 64GB RAM, SSD disks and dual > octo > > core Xeons. > > > > Second: I get this. > > > > [ INFO ] Stage: Setup validation > > [WARNING] Cannot validate host name settings, reason: resolved host does > not > > match any of the local addresses > > During execution engine service will be stopped (OK, Cancel) > [OK]: > > > > Third: when admin panel finally loads, I use admin at internal plus my root > > password set during installation setup. I get this: > > > > Unable to log in. Verify your login information or contact the system > > administrator. > > > > This is highly likely a DNS issue, the engine tries to resolve itself and > if > it can't, it takes a long time to load the webadmin (Not sure why it does > this, but fixing the DNS will fix the slow loading). > I agree. It happens because of the TLS layer validation. Y. > > > > --- > > This email has been checked for viruses by Avast antivirus software. > > https://www.avast.com/antivirus > > > > _______________________________________________ > > Users mailing list > > Users at ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From sradco at redhat.com Thu Apr 12 21:04:23 2018 From: sradco at redhat.com (Shirly Radco) Date: Thu, 12 Apr 2018 21:04:23 +0000 Subject: [ovirt-users] ansible failure during host install In-Reply-To: References: Message-ID: Hi, What version of ovirt-engine-metrics are you using? Did you already setup the OpenShift based metrics store to connect to? Have you configured /etc/ovirt-engine-metrics/config.yml? -- SHIRLY RADCO BI SENIOR SOFTWARE ENGINEER Red Hat Israel TRIED. TESTED. TRUSTED. On Thu, Apr 12, 2018, 21:35 Young, Matthew (Numerical Algorithms Group) < Matthew.Young3 at bp.com> wrote: > Hello all, > > > > I have been working on adding a new host to an oVirt cluster. The > installation is failing in the ansible portion, specifically installing the > ansible elasticsearch ca cert. I have no experience with ansible. Does > anyone know what is causing this issue? Or how to create this ca cert? > > > > **** from ansible log**** > > ? > > 2018-04-12 09:32:18,114 p=56616 u=ovirt | TASK > [oVirt.ovirt-fluentd/fluentd-setup : Create fluentd.conf] ***************** > > 2018-04-12 09:32:18,730 p=56616 u=ovirt | ok: [10.222.10.156] => { > > "changed": false, > > "checksum": "c9f88b60cd12ab8e3f3ffce1ae07654c89b06ef6", > > "gid": 0, > > "group": "root", > > "mode": "0640", > > "owner": "root", > > "path": "/etc/fluentd/fluent.conf", > > "secontext": "system_u:object_r:etc_t:s0", > > "size": 58, > > "state": "file", > > "uid": 0 > > } > > 2018-04-12 09:32:18,739 p=56616 u=ovirt | TASK > [oVirt.ovirt-fluentd/fluentd-setup : Install fluentd certificate] ********* > > 2018-04-12 09:32:18,759 p=56616 u=ovirt | skipping: [10.222.10.156] => { > > "changed": false, > > "skip_reason": "Conditional result was False" > > } > > 2018-04-12 09:32:18,768 p=56616 u=ovirt | TASK > [oVirt.ovirt-fluentd/fluentd-setup : Install fluentd elasticsearch CA > certificate] *** > > 2018-04-12 09:32:18,810 p=56616 u=ovirt | fatal: [10.222.10.156]: FAILED! > => { > > "changed": false > > } > > > > MSG: > > > > src (or content) is required > > > > 2018-04-12 09:32:18,812 p=56616 u=ovirt | PLAY RECAP > ********************************************************************* > > 2018-04-12 09:32:18,812 p=56616 u=ovirt | 10.222.10.156 : > ok=33 changed=4 unreachable=0 failed=1 > > > > ************ > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From i.am.stack at gmail.com Thu Apr 12 22:26:07 2018 From: i.am.stack at gmail.com (~Stack~) Date: Thu, 12 Apr 2018 17:26:07 -0500 Subject: [ovirt-users] I broke my ovirt real good.... Message-ID: <816729cd-1ec6-f2e6-6986-2a18e83ab650@gmail.com> Greetings, So I did a over-confident-admin-makes-rookie-mistake. I changed a bunch of things all back-to-back and thus don't actually know what broke. :-D The only two real "big" changes were: * Upgrade from 4.2.1 to 4.2.2 * change my ovirtmgmt network The update I followed the upgrade procedures and I thought it all went pretty well. Because I am moving it from a testing into what I hope will be a more heavily used environment, I changed my ovirtmgmt network from 192.168.100.0/24 to 192.168.101.0/24 via the web-gui. That was a touch tricker than just a change as I had to poke the management engine host to be reachable on both network for a while, then it just seemed OK. What's happening is: * I can no longer migrate a vm from one host to the other. * If I try to do a "reinstall" it dies. * There is some serious network lag between my hosts on a 10Gb network. * I've got all kinds of python2.4 failures in my vdsm and mom logs. Those are least the biggies. So while I was planning on moving this to a more active use case, right now - it is all still my play ground. I would REALLY hate to lose the VM's but everything else can go and be rebuilt. Given that I've somehow really broke this system pretty good, would it be more advisable to blow away and rebuild it ALL or can I simply delete the hypervisor hosts and rebuild them? Thoughts? Thanks! ~Stack~ -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: OpenPGP digital signature URL: From michal.skrivanek at redhat.com Fri Apr 13 07:54:08 2018 From: michal.skrivanek at redhat.com (Michal Skrivanek) Date: Fri, 13 Apr 2018 09:54:08 +0200 Subject: [ovirt-users] [ANN] oVirt 4.2.3 First Release Candidate is now available In-Reply-To: References: Message-ID: <89B1B0CC-E529-4CCF-B49E-6FB3B57DFD47@redhat.com> > On 12 Apr 2018, at 16:21, Lev Veyde wrote: > > The oVirt Project is pleased to announce the availability of the oVirt 4.2.3 First Release Candidate, as of April 12th, 2018 > > This update is a release candidate of the third in a series of stabilization updates to the 4.2 > series. > This is pre-release software. This pre-release should not to be used in production. > > This release is available now for: > * Red Hat Enterprise Linux 7.4 or later > * CentOS Linux (or similar) 7.4 or later > > This release supports Hypervisor Hosts running: > * Red Hat Enterprise Linux 7.4 or later on RHEL it requires the recent 7.5 > * CentOS Linux (or similar) 7.4 or later > * oVirt Node 4.2 > > See the release notes [1] for installation / upgrade instructions and > a list of new features and bugs fixed. > > Notes: > - oVirt Appliance is available > - oVirt Node is available [2] > > Additional Resources: > * Read more about the oVirt 4.2.3 release highlights:http://www.ovirt.org/release/4. 2 . 3 / > * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt > * Check out the latest project news on the oVirt blog:http://www.ovirt.org/blog/ > > [1] http://www.ovirt.org/release/4. 2 . 3 / > [2] http://resources.ovirt.org/pub/ovirt-4. 2 -pre /iso/ > -- > > LEV VEYDE > SOFTWARE ENGINEER, RHCE | RHCVA | MCITP > Red Hat Israel > > > lev at redhat.com | lveyde at redhat.com > TRIED. TESTED. TRUSTED. _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users -------------- next part -------------- An HTML attachment was scrubbed... URL: From mcmr at oticon.com Fri Apr 13 08:02:29 2018 From: mcmr at oticon.com (Michael Mortensen (MCMR)) Date: Fri, 13 Apr 2018 08:02:29 +0000 Subject: [ovirt-users] I broke my ovirt real good.... In-Reply-To: <816729cd-1ec6-f2e6-6986-2a18e83ab650@gmail.com> References: <816729cd-1ec6-f2e6-6986-2a18e83ab650@gmail.com> Message-ID: <48ea2d3977b34cbf92602811be1f01cc@KBNMXEXC01.Demant.com> Hi Stack, Do you use FQDN? Did you perhaps hit this one https://www.ovirt.org/blog/2016/05/modify-ifcfg-files/ ? The discussion in this bug report may be of assistance in that case: https://bugzilla.redhat.com/show_bug.cgi?id=1252534 If you've stored the VM disks and templates and whatnot on a network share like NFS, you should be able to start all over and import your old (current) storage domains and start using your templates etc. Best wishes // Mike -----Original Message----- From: users-bounces at ovirt.org [mailto:users-bounces at ovirt.org] On Behalf Of ~Stack~ Sent: 13. april 2018 00:26 To: users Subject: [ovirt-users] I broke my ovirt real good.... Greetings, So I did a over-confident-admin-makes-rookie-mistake. I changed a bunch of things all back-to-back and thus don't actually know what broke. :-D The only two real "big" changes were: * Upgrade from 4.2.1 to 4.2.2 * change my ovirtmgmt network The update I followed the upgrade procedures and I thought it all went pretty well. Because I am moving it from a testing into what I hope will be a more heavily used environment, I changed my ovirtmgmt network from 192.168.100.0/24 to 192.168.101.0/24 via the web-gui. That was a touch tricker than just a change as I had to poke the management engine host to be reachable on both network for a while, then it just seemed OK. What's happening is: * I can no longer migrate a vm from one host to the other. * If I try to do a "reinstall" it dies. * There is some serious network lag between my hosts on a 10Gb network. * I've got all kinds of python2.4 failures in my vdsm and mom logs. Those are least the biggies. So while I was planning on moving this to a more active use case, right now - it is all still my play ground. I would REALLY hate to lose the VM's but everything else can go and be rebuilt. Given that I've somehow really broke this system pretty good, would it be more advisable to blow away and rebuild it ALL or can I simply delete the hypervisor hosts and rebuild them? Thoughts? Thanks! ~Stack~ From fsoyer at systea.fr Fri Apr 13 08:14:37 2018 From: fsoyer at systea.fr (fsoyer) Date: Fri, 13 Apr 2018 10:14:37 +0200 Subject: [ovirt-users] =?utf-8?b?Pz09P3V0Zi04P3E/ICB2ZHNDbGllbnQgaXMgcmVt?= =?utf-8?q?oved_and_replaced_by_vdsm-client?= In-Reply-To: Message-ID: <44f2-5ad06700-fd-6a9c8000@219054693> Hi all, I can't find any exhaustive doc for new vdsm-client. My problem actually is a task (export a vm to OVA) blocked. I found that I can interact with vdsm-client Task getInfo taskID=, and replace getInfo by "stop", BUT : how can I find this UUID ??? Old "vdsClient -s 0 getAllTasksStatuses" has no equivalent ?? Does someone knows if a complete doc exists dot vdsm-client ? Thanks Frank ? Le Mercredi, Janvier 25, 2017 12:30 CET, Irit Goihman a ?crit: ?Hi All,?vdsClient will be removed from master branch today.It is using XMLRPC protocol which has been deprecated and replaced by JSON-RPC.?A new client for vdsm was introduced in 4.1: vdsm-client.This is a simple client that uses JSON-RPC protocol which was introduced in ovirt 3.5.?The client is not aware of the available methods and parameters, and you should consult?the schema [1] in order to construct the desired command.?Future version should parse the schema and provide online help.??If you're using vdsClient, we will be happy to assist you in migrating to the new vdsm client.???vdsm-client usage:?vdsm-client [-h] [-a ADDRESS] [-p PORT] [--unsecure] [--timeout TIMEOUT]? ? ? ? ? ? ? ? ? ?[-f FILE] namespace method [name=value [name=value] ...]??Invoking simple methods:?# vdsm-client Host getVMList['b3f6fa00-b315-4ad4-8108-f73da817b5c5']?For invoking methods with many or complex parameters, you can read the?parameters from a JSON format file:?# vdsm-client Lease info -f lease.json?where lease.json file content is:?{ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? "lease": { ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ??? ? ? ? ? ? ? "sd_id": "75ab40e3-06b1-4a54-a825-2df7a40b93b2", ? ? ? ? ? ? ? ? ? ??? ? ? ? ? ? ? "lease_id": "b3f6fa00-b315-4ad4-8108-f73da817b5c5" ? ? ? ? ? ? ? ? ??? ? ? ? ? } ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? } ??It is also possible to read parameters from standard input, creating complex?parameters interactively:?# cat < From Sven.Achtelik at eps.aero Fri Apr 13 09:00:07 2018 From: Sven.Achtelik at eps.aero (Sven Achtelik) Date: Fri, 13 Apr 2018 09:00:07 +0000 Subject: [ovirt-users] Recovering oVirt-Engine with a backup before upgrading to 4.2 In-Reply-To: <390ad7391c6d4dc1b1d92a762c509e88@eps.aero> References: <41e0a4df7d7b4b04824f154982fe953f@eps.aero> <390ad7391c6d4dc1b1d92a762c509e88@eps.aero> Message-ID: <209f6ce7aa8a44e19d1f35d768b3025b@eps.aero> Hi All, I got my stuff up and running again. I works like described in the manual and I used some extra hardware to jumpstart this. I'm now back on my hosted Engine 4.1.9 with 3 Hosts running it. The Engine is running on the appliance that is pulled by the deployment tool and after having everything stable again I thought of upgrading to 4.2. Thing is that this is just not working with the appliance because of some issue when upgrading Postgres inside. Looking at the logs I found this: ---------------------------- Creating dump of database schemas engine ovirt_engine_history postgres template1 ok encodings for database "postgres" do not match: old "SQL_ASCII", new "UTF8" Failure, exiting ------------------------------ After some research I found something here https://bugzilla.redhat.com/show_bug.cgi?id=1525976, but I'm not sure what to do with that Information. I used the appliance and didn't do anything manual in the complete process and I'm wondering why I'm getting this issue now ? Could someone advice on how to proceed ? Thank you, Sven > -----Urspr?ngliche Nachricht----- > Von: users-bounces at ovirt.org [mailto:users-bounces at ovirt.org] Im Auftrag > von Sven Achtelik > Gesendet: Mittwoch, 28. M?rz 2018 18:28 > An: Yedidyah Bar David > Cc: users at ovirt.org > Betreff: Re: [ovirt-users] Recovering oVirt-Engine with a backup before > upgrading to 4.2 > > > > > -----Urspr?ngliche Nachricht----- > > Von: Yedidyah Bar David [mailto:didi at redhat.com] > > Gesendet: Mittwoch, 28. M?rz 2018 10:06 > > An: Sven Achtelik > > Cc: users at ovirt.org > > Betreff: Re: [ovirt-users] Recovering oVirt-Engine with a backup > > before upgrading to 4.2 > > > > On Tue, Mar 27, 2018 at 9:14 PM, Sven Achtelik > > > > wrote: > > > Hi All, > > > > > > > > > > > > I?m still facing issues with my HE engine. Here are the steps that I > > > took to end up in this situation: > > > > > > > > > > > > - Update Engine from 4.1.7 to 4.1.9 > > > > > > o That worked as expected > > > > > > - Automatic Backup of Engine DB in the night > > > > > > - Upgraded Engine from 4.1.9 to 4.2.1 > > > > > > o That worked fine > > > > > > - Noticed Issues with the HA support for HE > > > > > > o Cause was not having the latest ovirt-ha agent/broker version on hosts > > > > > > - After updating the first host with the latest packages for the > > > Agent/Broker engine was started twice > > > > > > o As a result the Engine VM Disk was corrupted and there is no Backup of > > > the Disk > > > > > > o There is also no Backup of the Engine DB with version 4.2 > > > > > > - VM disk was repaired with fsck.ext4, but DB is corrupt > > > > > > o Can?t restore the Engine DB because the Backup DB from Engine V 4.1 > > > > > > - Rolled back all changes on Engine VM to 4.1.9 and imported Backup > > > > > > o Checked for HA VMs to set as disabled and started the Engine > > > > > > - Login is fine but the Engine is having trouble picking up and > > > information from the Hosts > > > > > > o No information on running VMs or hosts status > > > > > > - Final Situation > > > > > > o 2 Hosts have VMs still running and I can?t stop those > > > > > > o I still have the image of my corrupted Engine VM (v4.2) > > > > > > > > > > > > Since there were no major changes after upgrading from 4.1 to 4.2, > > > would it be possible to manually restore the 4.1 DB to the 4.2 > > > Engine VM to this up and running again or are there modifications > > > made to the DB on upgrading that are relevant for this ? > > > > engine-backup requires restoring to the same version used to take the > > backup, with a single exception - on 4.0, it can restore 3.6. > > > > It's very easy to patch it to allow also 4.1->4.2, search inside it > > for "VALID_BACKUP_RESTORE_PAIRS". However, I do not think anyone ever > > tested this, so no idea might break. In 3.6->4.0 days, we did have to > > fix a few other things, notably apache httpd and iptables->firewalld: > > > > https://bugzilla.redhat.com/show_bug.cgi?id=1318580 > > > > > All my work on rolling back to 4.1.9 with the DB restore failed as > > > the Engine is not capable of picking up information from the hosts. > > > > No idea why, but not sure it's related to your restore flow. > > > > > Lessons learned is to always make a copy/snapshot of the engine VM > > > disk before upgrading anything. > > > > If it's a hosted-engine, this isn't supported - see my reply on the > > list ~ 1 hour ago... > > > > > What are my options on getting > > > back to a working environment ? Any help or hint is greatly appreciated. > > > > Restore again with either methods - what you tried, or patching > > engine- backup and restore directly into 4.2 - and if the engine fails > > to talk to the hosts, try to debug/fix this. > > > > If you suspect corruption more severe that just the db, you can > > install a fresh engine machine from scratch and restore to it. If it's > > a hosted-engine, you'll need to deploy hosted-engine from scratch, > > check docs about hosted-engine backup/restore. > > I read through those documents and it seems that I would need an extra > Host/Hardware which I don't have. https://ovirt.org/documentation/self- > hosted/chap-Backing_up_and_Restoring_an_EL-Based_Self- > Hosted_Environment/ > > So how would I be able to get a new setup working when I would like to use the > Engine-VM-Image ? At this point it sounds like I would have to manually > reinstall the machine that is left over and running. I'm lost at this point. > > > > Best regards, > > -- > > Didi > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users From klute at ingenit.com Fri Apr 13 09:26:32 2018 From: klute at ingenit.com (Thomas Klute) Date: Fri, 13 Apr 2018 11:26:32 +0200 Subject: [ovirt-users] Hosted Engine won't start, how to debug? Message-ID: <0ca3f140-d196-b128-cfb2-a6b2b4aaf75f@ingenit.com> Dear oVirt Team, after trying to reboot a hosted engine setup on oVirt 4.2 the VM won't come up anymore. The qemu-kvm process is there but we're unable to access the VM using - the serial console (simply does not show anything, does not react to characters typed) - VNC / Spice because the hosted engine vm.conf does not contain any graphics device. Before trying to reinstall, we'd like to recover and debug what is going on. We mounted a Centos7 install .iso and started the VM using hosted-engine --vm-start --vm-conf=/var/run/ovirt-hosted-engine-ha/vm-custom.conf But we still have to problem, that the serial console does not show anything and there is no way to connect using VNC. So, what is the recommended way to move forward in such situation? IMHO the classical way would be to add a graphics device and connect via VNC? I did not use the serial console much, up to now. Should the serial console show any output during boot? Thanks for your help, ?Thomas -- ________________________________________________________________________ Dipl.-Inform. Thomas Klute klute at ingenit.com Gesch?ftsf?hrer / CEO ---------------------------------------------------------------------- ingenit GmbH & Co. KG Tel. +49 (0)231 58 698-120 Emil-Figge-Strasse 76-80 Fax. +49 (0)231 58 698-121 D-44227 Dortmund www.ingenit.com Registergericht: Amtsgericht Dortmund, HRA 13 914 Gesellschafter : Thomas Klute, Marc-Christian Schr?er ________________________________________________________________________ From vasily.lamykin at MegaFon.ru Fri Apr 13 09:44:33 2018 From: vasily.lamykin at MegaFon.ru (Vasily Lamykin) Date: Fri, 13 Apr 2018 09:44:33 +0000 Subject: [ovirt-users] OVN between two different datacenters with different networks In-Reply-To: <20180410170744.4d334366@t460p> References: <20180410170744.4d334366@t460p> Message-ID: Very big thanks, In your solution I want fix only one... " tunneling-IP is IP-of-host-of-engine-2" For me - works variant is IP of host2 , which can provides access to engine1 ??????? ??????? ??????? ??????? ?? ???????????? ??????? ???????? ?????? ?????????? ????? ??????? ?????? ????? ?????????? ????? +7 (925) 696-1032 -----Original Message----- From: Dominik Holler [mailto:dholler at redhat.com] Sent: Tuesday, April 10, 2018 6:08 PM To: Vasily Lamykin (GNOC) Cc: users at ovirt.org Subject: Re: [ovirt-users] OVN between two different datacenters with different networks On Tue, 10 Apr 2018 11:48:50 +0000 Vasily Lamykin wrote: > Hi, all > I try to configure ovn in engine, what I do by step: > 1.Created network test1 with external ovn provider on engine1 > 2.Created subnet for this network 3.Connect engine2 to engine1 ovn > provider(through ?add provider?) 4.Successfully imported network test1 > on engine2 5.I see subnet?s on all engines 6.Created 2 VM with nic in > network test1 on both engines 7.Assigned ips from one > subnet(192.168.10.0/24) to all VMs > The subnet is used to configure OVN's internal DHCP server. This means you use DHCP to assign IPs to the vNICs, which is already a good test if the VM is connected as expected. > Expected results: VM from engine1 can ping VM from engine2 in same > subnet in ovn network test1 > > Now, I don?t have ping ability between two VMs > > ovn-nbctl show > switch 54beaa3c-de8f-435f-b132-8542ddeb4b4b (test-ovn-phys) > port b580d44d-e616-42dd-9e17-63983d0f91e5 > addresses: ["00:1a:4a:16:01:01 dynamic"] > port cfd5f32c-00a7-419e-8bbe-27518a4c74dc > addresses: ["00:1a:4a:16:01:00 dynamic"] > > node from engine1 with testVM > vnet0: mtu 1500 qdisc pfifo_fast > master ovs-system state UNKNOWN qlen 1000 link/ether > fe:1a:4a:16:01:01 brd ff:ff:ff:ff:ff:ff inet6 > fe80::fc1a:4aff:fe16:101/64 scope link valid_lft forever preferred_lft > forever > > node from engine2 with testVM > vnet0: mtu 1500 qdisc pfifo_fast > master ovs-system state UNKNOWN qlen 1000 link/ether > fe:1a:4a:16:01:00 brd ff:ff:ff:ff:ff:ff inet6 > fe80::fc1a:4aff:fe16:100/64 scope link valid_lft forever preferred_lft > forever > > How can I do ovn connection? What I did wrong? > Please note that per host only a single OVN central is supported! Please check via sudo ovn-sbctl show on engine1 if both hosts are connected to OVN central engine1. Probably the host of engine2 is configured to use engine2 as it's OVN central. Probable the host of engine2 has to be connected to OVN central engine1 and the tunneling interface might require some configuration. Both is handled by executing /usr/libexec/ovirt-provider-ovn/setup_ovn_controller.sh \ IP-central tunneling-IP key_file cert_file ca_file on the host. Probably IP-central is IP-of-engine1 tunneling-IP is IP-of-host-of-engine-2 and key_file cert_file ca_file has to be stolen from host of engine1 and copied in a new location on host2 and configured on host2. > ________________________________ > > ?????????? ? ???? ????????? ????????????? ????????????? ??? ?????????? > ???, ??????? ??? ??????????. ? ????????? ????? ??????????? > ???????????????? ??????????, ??????? ?? ????? ???? ???????? ??? > ???????????? ???-????, ????? ?????????. ???? ?? ?? ??????? ????? > ?????????, ?? ?????????????, ?????????????, ??????????? ??? > ??????????????? ?????????? ????????? ??? ??? ????? ????????? ? > ?????????. ???? ?? ???????? ??? ????????? ????????, ??????????, > ??????????????? ???????? ??????????? ?? ???? ? ??????? ?? ???? > ?????????? ???? ????????? ? ????? ????????? ??? ????? ? ??????????. > > The information contained in this communication is intended solely for > the use of the individual or entity to whom it is addressed and others > authorized to receive it. It may contain confidential or legally > privileged information. The contents may not be disclosed or used by > anyone other than the addressee. If you are not the intended > recipient(s), any use, disclosure, copying, distribution or any action > taken or omitted to be taken in reliance on it is prohibited and may > be unlawful. If you have received this communication in error please > notify us immediately by responding to this email and then delete the > e-mail and all attachments and any copies thereof. > > ----- From i.am.stack at gmail.com Fri Apr 13 10:58:29 2018 From: i.am.stack at gmail.com (~Stack~) Date: Fri, 13 Apr 2018 05:58:29 -0500 Subject: [ovirt-users] I broke my ovirt real good.... In-Reply-To: <48ea2d3977b34cbf92602811be1f01cc@KBNMXEXC01.Demant.com> References: <816729cd-1ec6-f2e6-6986-2a18e83ab650@gmail.com> <48ea2d3977b34cbf92602811be1f01cc@KBNMXEXC01.Demant.com> Message-ID: On 04/13/2018 03:02 AM, Michael Mortensen (MCMR) wrote: > Hi Stack, > > Do you use FQDN? Did you perhaps hit this one https://www.ovirt.org/blog/2016/05/modify-ifcfg-files/ ? The discussion in this bug report may be of assistance in that case: https://bugzilla.redhat.com/show_bug.cgi?id=1252534 That looks very interesting! I will investigate that. > If you've stored the VM disks and templates and whatnot on a network share like NFS, you should be able to start all over and import your old (current) storage domains and start using your templates etc. I am currently using NFS. I will see how this networking issue you pointed me to works out, then maybe rebuild. Thank you for the assistance! ~Stack~ -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: OpenPGP digital signature URL: From phudec at cnc.sk Fri Apr 13 11:12:20 2018 From: phudec at cnc.sk (Peter Hudec) Date: Fri, 13 Apr 2018 13:12:20 +0200 Subject: [ovirt-users] Engine reports In-Reply-To: <67963bc8-87d7-c4cd-2839-c105790fdd8c@redhat.com> References: <855bb1c1-33c7-d6ec-f513-5702bc2f736c@redhat.com> <4e975c4c-8492-c2c0-4649-75e1bf8a3163@redhat.com> <70243db2-b0e4-55f6-eef9-43a9f5f16c29@cnc.sk> <3be957c0-3667-cb3c-eb6a-d3e06600b597@redhat.com> <31bf3237-ab58-dcf3-8ce8-38dc9348dcc5@redhat.com> <52546f65-87b8-ac5c-93e4-8ce8ba08878e@cnc.sk> <67963bc8-87d7-c4cd-2839-c105790fdd8c@redhat.com> Message-ID: <89fb37b5-8693-1bf4-c06d-00163f0c4bbb@cnc.sk> thanks, problem was with the selinux. I applied the permission on the /var/lib/elasticsearch once again. Deployment is done ;) Right now mi browser is complaining about certificate on SSO. When I try to reach https://kibana. I'm redirected to SSO https:// :8443/oauth/authorize?... An error occurred during a connection to metrics.ovirt.cnc.sk:8443. You have received an invalid certificate. Please contact the server administrator or email correspondent and give them the following information: Your certificate contains the same serial number as another certificate issued by the certificate authority. Please get a new certificate containing a unique serial number. Error code: SEC_ERROR_REUSED_ISSUER_AND_SERIAL Peter On 12/04/2018 19:47, Rich Megginson wrote: > sudo ls -alrtF -Z /var/lib/elasticsearch > > oc logs logging-es-data-master-z6zbv4v2-2-deploy > > oc describe pod logging-es-data-master-z6zbv4v2-2-deploy > > sudo grep type=AVC /var/log/audit/audit.log | tail > > On 04/12/2018 02:32 AM, Peter Hudec wrote: >> back to this issue. >> >> something went wrong ;( The status command got error. I'm not familiar >> with openshift, so the log processing will took me a while. >> >> [PROD] root at dipostat01.cnc.sk: ~ # oc project logging >> Already on project "logging" on server >> "https://metrics.ovirt.cnc.sk:8443". >> [PROD] root at dipostat01.cnc.sk: ~ # oc adm policy add-scc-to-user >> hostmount-anyuid \ >>> ?????? system:serviceaccount:logging:aggregated-logging-elasticsearch >> scc "hostmount-anyuid" added to: >> ["system:serviceaccount:logging:aggregated-logging-elasticsearch"] >> [PROD] root at dipostat01.cnc.sk: ~ # oc rollout cancel $( oc get -n >> logging dc -l component=es -o name ) >> No rollout is in progress (latest rollout #2 failed 3 days ago) >> [PROD] root at dipostat01.cnc.sk: ~ # oc rollout latest $( oc get -n >> logging dc -l component=es -o name ) >> deploymentconfig "logging-es-data-master-z6zbv4v2" rolled out >> [PROD] root at dipostat01.cnc.sk: ~ #? oc rollout status -w $( oc get -n >> logging dc -l component=es -o name ) >> Waiting for rollout to finish: 0 of 1 updated replicas are available... >> error: replication controller "logging-es-data-master-z6zbv4v2-3" has >> failed progressing >> >> >> [PROD] root at dipostat01.cnc.sk: ~ # oc get pods >> NAME?????????????????????????????????????? READY???? STATUS??? RESTARTS >> ? AGE >> logging-curator-1-c894f??????????????????? 1/1?????? Running?? >> 904??????? 5d >> logging-es-data-master-z6zbv4v2-2-deploy?? 0/1?????? Error???? >> 0????????? 3d >> logging-fluentd-x9vzs????????????????????? 1/1?????? Running?? >> 1????????? 5d >> logging-kibana-1-6bvvw???????????????????? 2/2?????? Running?? >> 2????????? 5d >> logging-mux-1-xxmdj??????????????????????? 1/1?????? Running?? >> 1????????? 5d >> [PROD] root at dipostat01.cnc.sk: ~ # oc get pods >> NAME?????????????????????????????????????? READY???? STATUS??? RESTARTS >> ? AGE >> logging-curator-1-c894f??????????????????? 1/1?????? Running?? >> 904??????? 5d >> logging-es-data-master-z6zbv4v2-2-deploy?? 0/1?????? Error???? >> 0????????? 3d >> logging-fluentd-x9vzs????????????????????? 1/1?????? Running?? >> 1????????? 5d >> logging-kibana-1-6bvvw???????????????????? 2/2?????? Running?? >> 2????????? 5d >> logging-mux-1-xxmdj??????????????????????? 1/1?????? Running?? >> 1????????? 5d >> [PROD] root at dipostat01.cnc.sk: ~ # oc get pods >> NAME?????????????????????????????????????? READY???? STATUS??? RESTARTS >> ? AGE >> logging-curator-1-c894f??????????????????? 1/1?????? Running?? >> 904??????? 5d >> logging-es-data-master-z6zbv4v2-2-deploy?? 0/1?????? Error???? >> 0????????? 3d >> logging-fluentd-x9vzs????????????????????? 1/1?????? Running?? >> 1????????? 5d >> logging-kibana-1-6bvvw???????????????????? 2/2?????? Running?? >> 2????????? 5d >> logging-mux-1-xxmdj??????????????????????? 1/1?????? Running?? >> 1????????? 5d >> [PROD] root at dipostat01.cnc.sk: ~ # oc get svc >> NAME??????????????????? TYPE??????? CLUSTER-IP?????? EXTERNAL-IP >> PORT(S)???? AGE >> logging-es????????????? ClusterIP?? 172.30.249.174?? >> 9200/TCP??? 5d >> logging-es-cluster????? ClusterIP?? 172.30.114.201?? >> 9300/TCP??? 5d >> logging-es-prometheus?? ClusterIP?? 172.30.203.113?? >> 443/TCP???? 5d >> logging-kibana????????? ClusterIP?? 172.30.29.192??? >> 443/TCP???? 5d >> logging-mux???????????? ClusterIP?? 172.30.170.158?? 192.168.16.17 >> 24284/TCP?? 5d >> >> >> On 07/04/2018 01:09, Rich Megginson wrote: >>> Great! >>> >>> On 04/06/2018 04:43 PM, Peter Hudec wrote: >>>> Ansible playbook finished OK. The next step after weekend. >>>> >>>> ?????thanks >>>> ???????? Peter >>>> >>>> On 06/04/2018 23:34, Rich Megginson wrote: >>>>> On 04/06/2018 03:08 PM, Peter Hudec wrote: >>>>>> Hi, >>>>>> >>>>>> https://tools.apps.hudecof.net/paste/view/1d493d52 >>>>>> >>>>>> The difference is >>>>>> - I used latest ansible 2.5 from PIPY source, since the RPM >>>>>> package do >>>>>> not fit requirements >>>>>> - I used GIT repo for openshift-ansible. >>>>>> >>>>>> I could start it over with the RPM based openshift-ansible >>>>> I recommend that you start over with the RPM based openshift-ansible, >>>>> which is what the instructions say, which is what I have tested >>>>> >>>>> alternately - if you want to go the more experimental route, you could >>>>> enable the epel-testing yum repo - ansible-2.5 is in epel-testing >>>>> which >>>>> I've been told by the openshift-ansible guys should work >>>>> >>>>>> ??????Peter >>>>>> >>>>>> On 06/04/2018 20:23, Rich Megginson wrote: >>>>>>> I'm assuming you are running on a CentOS7 machine, recently >>>>>>> updated to >>>>>>> the latest base packages. Please confirm. >>>>>>> >>>>>>> Please provide the output of the following commands: >>>>>>> >>>>>>> sudo yum repolist >>>>>>> >>>>>>> sudo rpm -q ansible >>>>>>> >>>>>>> sudo yum repoquery -i ansible >>>>>>> >>>>>>> sudo rpm -q openshift-ansible >>>>>>> >>>>>>> sudo yum repoquery -i openshift-ansible >>>>>>> >>>>>>> sudo rpm -q origin >>>>>>> >>>>>>> sudo yum repoquery -i origin >>>>>>> >>>>>>> sudo cat >>>>>>> /usr/share/ansible/openshift-ansible/roles/lib_utils/callback_plugins/aa_version_requirement.py >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> sudo ls -alrtF /etc/origin/logging >>>>>>> >>>>>>> Please confirm that you followed the steps listed in the link below, >>>>>>> including the use of the ansible inventory, vars.yaml.template, and >>>>>>> repo >>>>>>> files: >>>>>>> https://github.com/richm/Main/blob/7e663351dc371b7895564072c7656ebfda45068d/README-install.md >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> On 04/06/2018 03:19 AM, Peter Hudec wrote: >>>>>>>> first issue is ansible version, could be solved by virtual env >>>>>>>> >>>>>>>> FATAL: Current Ansible version (2.4.2.0) is not supported. >>>>>>>> Supported >>>>>>>> versions: 2.4.3.0 or newer >>>>>>>> >>>>>>>> yum install -y python-virtualenv >>>>>>>> virtualenv ansible >>>>>>>> . ./ansible/bin/activate >>>>>>>> pip install -U pip setuptolls >>>>>>>> pip install -U pip setuptools >>>>>>>> pip install ansible >>>>>>>> >>>>>>>> >>>>>>>> Second issue is a little bit strange for me >>>>>>>> >>>>>>>> 2018-04-06 10:00:30,264 p=68226 u=root |? Failure summary: >>>>>>>> >>>>>>>> >>>>>>>> ????? 1. Hosts:??? localhost >>>>>>>> ???????? Play:???? OpenShift Aggregated Logging >>>>>>>> ???????? Task:???? pulling down signing items from host >>>>>>>> ???????? Message:? ESC[0;31mAll items completedESC[0m >>>>>>>> >>>>>>>> I have found in logs >>>>>>>> >>>>>>>> 2018-04-06 10:00:28,356 p=68226 u=root |? failed: [localhost] >>>>>>>> (item=ca.crl.srl) => { >>>>>>>> ??????? "changed": false, >>>>>>>> ??????? "invocation": { >>>>>>>> ??????????? "module_args": { >>>>>>>> ??????????????? "src": "/etc/origin/logging/ca.crl.srl" >>>>>>>> ??????????? } >>>>>>>> ??????? }, >>>>>>>> ??????? "item": "ca.crl.srl", >>>>>>>> ??????? "msg": "file not found: /etc/origin/logging/ca.crl.srl" >>>>>>>> >>>>>>>> >>>>>>>> Is this good or bad ? >>>>>>>> >>>>>>>> ???????Peter >>>>>>>> >>>>>>>> On 05/04/2018 16:11, Rich Megginson wrote: >>>>>>>>> Is it possible that you could start over from scratch, using the >>>>>>>>> latest >>>>>>>>> instructions/files at >>>>>>>>> https://github.com/ViaQ/Main/pull/37/files? >>>>>>>>> >>>>>>>>> On 04/05/2018 07:19 AM, Peter Hudec wrote: >>>>>>>>>> The version is from >>>>>>>>>> >>>>>>>>>> /usr/share/ansible/openshift-ansible/roles/openshift_facts/library/openshift_facts.py:get_openshift_version >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> [PROD] root at dipostat01.cnc.sk: >>>>>>>>>> /usr/share/ansible/openshift-ansible # >>>>>>>>>> /usr/bin/openshift version >>>>>>>>>> openshift v3.10.0-alpha.0+f0186dd-401 >>>>>>>>>> kubernetes v1.9.1+a0ce1bc657 >>>>>>>>>> etcd 3.2.16 >>>>>>>>>> >>>>>>>>>> this binary is from the origin-3.7.2-1.el7.git.0.f0186dd.x86_64 >>>>>>>>>> package >>>>>>>>>> >>>>>>>>>> [PROD] root at dipostat01.cnc.sk: ~ # rpm -qf /usr/bin/openshift >>>>>>>>>> origin-3.7.2-1.el7.git.0.f0186dd.x86_64 >>>>>>>>>> >>>>>>>>>> Hmm, why the version do not match ? >>>>>>>>>> >>>>>>>>>> ????????Peter >>>>>>>>>> >>>>>>>>>> On 04/04/2018 17:41, Shirly Radco wrote: >>>>>>>>>>> Hi, >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> I have a updated the installation instructions for installing >>>>>>>>>>> OpenShift >>>>>>>>>>> 3.9, based on Rich's work , for the oVirt use case. >>>>>>>>>>> >>>>>>>>>>> Please make sure where you get the 3.10 rpm and disable that >>>>>>>>>>> repo. >>>>>>>>>>> >>>>>>>>>>> This is the PR that includes the metrics store installation of >>>>>>>>>>> OpenShift 3.9 >>>>>>>>>>> >>>>>>>>>>> https://github.com/sradco/ovirt-site/blob/74f1e772c8ca75d4b9e57a3c02cce49c5030f7f7/source/develop/release-management/features/metrics/setting-up-viaq-logging.html.md >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> It should be merged soon, but you can use it to install. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Please make sure to add the?ansible-inventory-origin-39-aio >>>>>>>>>>> file as >>>>>>>>>>> described below. >>>>>>>>>>> These are required parameters for the ansible playbook. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Best regards, >>>>>>>>>>> >>>>>>>>>>> --? >>>>>>>>>>> >>>>>>>>>>> SHIRLY?RADCO >>>>>>>>>>> >>>>>>>>>>> BI SeNIOR SOFTWARE ENGINEER >>>>>>>>>>> >>>>>>>>>>> Red Hat?Israel >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> TRIED. TESTED. TRUSTED. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Wed, Apr 4, 2018 at 5:41 PM, Rich Megginson >>>>>>>>>>> >>>>>>>>>> > wrote: >>>>>>>>>>> >>>>>>>>>>> ???????? I'm sorry.? I misunderstood the request. >>>>>>>>>>> >>>>>>>>>>> ???????? We are in the process of updating the instructions for >>>>>>>>>>> installing >>>>>>>>>>> ???????? viaq logging based on upstream origin 3.9 - >>>>>>>>>>> ???????? https://github.com/ViaQ/Main/pull/37 >>>>>>>>>>> ???????? >>>>>>>>>>> >>>>>>>>>>> ???????? In the meantime, you can follow along on that PR, and >>>>>>>>>>> we will >>>>>>>>>>> have >>>>>>>>>>> ???????? instructions very soon. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????? On 04/04/2018 08:26 AM, Rich Megginson wrote: >>>>>>>>>>> >>>>>>>>>>> ???????????? On 04/04/2018 08:22 AM, Shirly Radco wrote: >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????????? -- >>>>>>>>>>> >>>>>>>>>>> ???????????????? SHIRLY RADCO >>>>>>>>>>> >>>>>>>>>>> ???????????????? BI SeNIOR SOFTWARE ENGINEER >>>>>>>>>>> >>>>>>>>>>> ???????????????? Red Hat Israel >>>>>>>>>>> >>>>>>>>>>> ???????????????? >>>>>>>>>>> ???????????????? TRIED. TESTED. TRUSTED. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????????? On Wed, Apr 4, 2018 at 5:07 PM, Peter Hudec >>>>>>>>>>> >>>>>>>>>> ???????????????? >>>>>>>>>> ???????????????? >> wrote: >>>>>>>>>>> >>>>>>>>>>> ???????????????? ??? almost the same issue, the versio for >>>>>>>>>>> openshoft >>>>>>>>>>> release >>>>>>>>>>> ???????????????? changed to 3.9 >>>>>>>>>>> >>>>>>>>>>> ???????????????? ??? Failure summary: >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????????? ??? ? 1. Hosts:? ? localhost >>>>>>>>>>> ???????????????? ??? ? ? ?Play:? ? ?Determine >>>>>>>>>>> openshift_version to >>>>>>>>>>> configure >>>>>>>>>>> ???????????????? on first >>>>>>>>>>> ???????????????? ??? master >>>>>>>>>>> ???????????????? ??? ? ? ?Task:? ? ?For an RPM install, abort >>>>>>>>>>> when the >>>>>>>>>>> release >>>>>>>>>>> ???????????????? ??? requested does >>>>>>>>>>> ???????????????? ??? not match the available version. >>>>>>>>>>> ???????????????? ??? ? ? ?Message:? You requested >>>>>>>>>>> openshift_release >>>>>>>>>>> 3.9, >>>>>>>>>>> ???????????????? which is not >>>>>>>>>>> ???????????????? ??? matched by >>>>>>>>>>> ???????????????? ??? ? ? ? ? ? ? ? ?the latest OpenShift RPM we >>>>>>>>>>> detected as >>>>>>>>>>> ???????????????? origin-3.10.0 >>>>>>>>>>> ???????????????? ??? ? ? ? ? ? ? ? ?on host localhost. >>>>>>>>>>> ???????????????? ??? ? ? ? ? ? ? ? ?We will only install the >>>>>>>>>>> latest >>>>>>>>>>> RPMs, so >>>>>>>>>>> ???????????????? please ensure >>>>>>>>>>> ???????????????? ??? you are getting the release >>>>>>>>>>> ???????????????? ??? ? ? ? ? ? ? ? ?you expect. You may need to >>>>>>>>>>> adjust >>>>>>>>>>> your >>>>>>>>>>> ???????????????? Ansible >>>>>>>>>>> ???????????????? ??? inventory, modify the repositories >>>>>>>>>>> ???????????????? ??? ? ? ? ? ? ? ? ?available on the host, or >>>>>>>>>>> run the >>>>>>>>>>> ???????????????? appropriate OpenShift >>>>>>>>>>> ???????????????? ??? upgrade playbook. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????????? What is the rpm version installed of >>>>>>>>>>> OpenShift?origin? >>>>>>>>>>> ???????????????? Do you perhaps have another repo that >>>>>>>>>>> includes the >>>>>>>>>>> OpenShift >>>>>>>>>>> ???????????????? origin-3.10.0? >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????? origin is the upstream version of OpenShift, >>>>>>>>>>> which is >>>>>>>>>>> unsupported. >>>>>>>>>>> >>>>>>>>>>> ???????????? sudo repoquery -i origin >>>>>>>>>>> >>>>>>>>>>> ???????????? This will tell you which repo it came from >>>>>>>>>>> >>>>>>>>>>> ???????????? You will need to disable that repo and uninstall >>>>>>>>>>> any >>>>>>>>>>> packages >>>>>>>>>>> ???????????? which came from that repo >>>>>>>>>>> >>>>>>>>>>> ???????????? Another mystery is why it is trying to install >>>>>>>>>>> origin >>>>>>>>>>> in the >>>>>>>>>>> ???????????? first place.? openshift-ansible with >>>>>>>>>>> ???????????? openshift_deployment_type=openshift-enterprise >>>>>>>>>>> should not >>>>>>>>>>> try to >>>>>>>>>>> ???????????? install origin, it should install packages with >>>>>>>>>>> names >>>>>>>>>>> like >>>>>>>>>>> ???????????? atomic-openshift-master, atomic-openshift-node, >>>>>>>>>>> etc. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????????? ??? On 04/04/2018 14:18, Shirly Radco wrote: >>>>>>>>>>> ???????????????? ??? > Adding Nicolas since he hit the same >>>>>>>>>>> issue. >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? > -- >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? > SHIRLY?RADCO >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? > BI SeNIOR SOFTWARE ENGINEER >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? > Red Hat?Israel >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? > TRIED. TESTED. TRUSTED. >>>>>>>>>>> >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? > On Wed, Apr 4, 2018 at 3:17 PM, Shirly >>>>>>>>>>> Radco >>>>>>>>>>> ???????????????? >>>>>>>>>>> ???????????????? >>>>>>>>>> > >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>> >>>>>>>>>>> ???????????????? >>>>>>>>>> >>> >>>>>>>>>>> wrote: >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?Hi Peter, >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?The installation instructions >>>>>>>>>>> currently >>>>>>>>>>> support >>>>>>>>>>> ???????????????? OpenShift 3.6. >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?I'm now working on updating them to >>>>>>>>>>> support >>>>>>>>>>> 3.9. >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?You currently have 3.10 installed. >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?Please install OpenShift 3.9 using >>>>>>>>>>> this >>>>>>>>>>> repository >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ????????????? >>>>>>>>>>> https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo >>>>>>>>>>> ???????????? >>>>>>>>>>> >>>>>>>>>>> ????????????? >>>>>>>>>>> >>>>>>>>>> ???????????? >>>>>>>>>>> > >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????? >>>>>>>>>>> ?????>>>>>>>>>> ???????????? >>>>>>>>>>> >>>>>>>>>>> ????????????? >>>>>>>>>>> >>>>>>>>>> ???????????? >>>>>>>>>>> >> >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?And add the following file to your vm >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?Run: >>>>>>>>>>> ???????????????? ??? >? ? ?vi >>>>>>>>>>> /root/ansible-inventory-origin-39-aio >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?Add: >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?-------------- >>>>>>>>>>> ???????????????? ??? >? ? ?[OSEv3:children] >>>>>>>>>>> ???????????????? ??? >? ? ?nodes >>>>>>>>>>> ???????????????? ??? >? ? ?masters >>>>>>>>>>> ???????????????? ??? >? ? ?etcd >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?[OSEv3:vars] >>>>>>>>>>> ???????????????? ??? >? ? ?ansible_connection=local >>>>>>>>>>> ???????????????? ??? >? ? ?openshift_release=v3.9 >>>>>>>>>>> ???????????????? ??? >? ? >>>>>>>>>>> ?openshift_logging_install_logging=true >>>>>>>>>>> ???????????????? ??? >? ? ?short_version=3.9 >>>>>>>>>>> ???????????????? ??? >? ? ?openshift_deployment_type=origin >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ?????????????? >>>>>>>>>>> ???openshift_master_identity_providers=[{'mappingMethod': >>>>>>>>>>> ???????????????? 'lookup', >>>>>>>>>>> ???????????????? ??? >? ? ?'challenge': 'true', 'login': 'true', >>>>>>>>>>> 'kind': >>>>>>>>>>> ???????????????? ??? >? ? ?'AllowAllPasswordIdentityProvider', >>>>>>>>>>> 'name': >>>>>>>>>>> ???????????????? 'allow_all'}] >>>>>>>>>>> ???????????????? ??? >? ? ?# bug - doesn't use correct tag >>>>>>>>>>> ???????????????? ??? >? ? ?openshift_logging_image_version=v3.9 >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ????????????? >>>>>>>>>>> ????openshift_logging_elasticsearch_proxy_image_version=v1.0.0 >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? >>>>>>>>>>> ?openshift_logging_es_allow_external=True >>>>>>>>>>> ???????????????? ??? >? ? ?openshift_logging_use_mux=True >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ??openshift_logging_mux_allow_external=True >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ?????openshift_logging_mux_file_buffer_storage_type=hostmount >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ?????openshift_logging_elasticsearch_storage_type=hostmount >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????? >>>>>>>>>>> ?????openshift_logging_elasticsearch_hostmount_path=/var/lib/elasticsearch >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?[nodes] >>>>>>>>>>> ???????????????? ??? >? ? ?localhost storage=True >>>>>>>>>>> ???????????????? openshift_node_labels="{'region': >>>>>>>>>>> ???????????????? ??? 'infra'}" >>>>>>>>>>> ???????????????? ??? >? ? ?openshift_schedulable=True >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?[masters] >>>>>>>>>>> ???????????????? ??? >? ? ?localhost storage=True >>>>>>>>>>> ???????????????? openshift_node_labels="{'region': >>>>>>>>>>> ???????????????? ??? 'infra'}" >>>>>>>>>>> ???????????????? ??? >? ? ?openshift_schedulable=True >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?[etcd] >>>>>>>>>>> ???????????????? ??? >? ? ?localhost storage=True >>>>>>>>>>> ???????????????? openshift_node_labels="{'region': >>>>>>>>>>> ???????????????? ??? 'infra'}" >>>>>>>>>>> ???????????????? ??? >? ? ?openshift_schedulable=True >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?------------ >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?Save and exit. >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?***Please make sure that you use >>>>>>>>>>> /var as >>>>>>>>>>> your >>>>>>>>>>> ???????????????? Elasticsearch >>>>>>>>>>> ???????????????? ??? >? ? ?persistent storage directory. >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?And when you run the OpenShift >>>>>>>>>>> ansible >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????? >>>>>>>>>>> ?????(https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????? >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????? >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????? >>>>>>>>>>> > >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????? >>>>>>>>>>> ?????>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????? >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????? >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????? >>>>>>>>>>> >>) >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????????? ??? >? ? ?use the file you just created like >>>>>>>>>>> this: >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?# cd >>>>>>>>>>> /usr/share/ansible/openshift-ansible >>>>>>>>>>> ???????????????? ??? >? ? ?# (or wherever you cloned the git >>>>>>>>>>> repo if >>>>>>>>>>> using git) >>>>>>>>>>> ???????????????? ??? >? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log >>>>>>>>>>> ansible-playbook >>>>>>>>>>> ???????????????? -vvv -e >>>>>>>>>>> ???????????????? ??? >? ? ?@/root/vars.yaml -i >>>>>>>>>>> ???????????????? /root/*ansible-inventory-origin-39-aio* >>>>>>>>>>> ???????????????? ??? >? ? ?playbooks/byo/config.yml >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?Best regards, >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?-- >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?SHIRLY?RADCO >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?BI SeNIOR SOFTWARE ENGINEER >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?Red Hat?Israel >>>>>>>>>>> >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ? >>>>>>>>>>> ???????????????? ??? >? ? ?TRIED. TESTED. TRUSTED. >>>>>>>>>>> >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ?On Wed, Apr 4, 2018 at 12:17 PM, >>>>>>>>>>> Peter >>>>>>>>>>> Hudec >>>>>>>>>>> ???????????????? >>>>>>>>>>> >>>>>>>>>> ???????????????? > >>>>>>>>>>> ???????????????? ??? >? ? ?>>>>>>>>>> >>>>>>>>>>> ???????????????? >>> >>>>>>>>>>> wrote: >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?Tried to install ovirt metrics, >>>>>>>>>>> but got >>>>>>>>>>> error >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?ANSIBLE_LOG_PATH=/tmp/ansible.log >>>>>>>>>>> ???????????????? ansible-playbook -vvv -e >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?@/root/vars.yaml -i >>>>>>>>>>> ???????????????? /root/ansible-inventory-origin-37-aio >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?playbooks/byo/config.yml >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?? 1. Hosts:? ? localhost >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?? ? ?Play:? ? ?Determine >>>>>>>>>>> openshift_version to >>>>>>>>>>> ???????????????? configure >>>>>>>>>>> ???????????????? ??? on first >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?master >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?? ? ?Task:? ? ?For an RPM >>>>>>>>>>> install, >>>>>>>>>>> abort when >>>>>>>>>>> ???????????????? the release >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?requested does >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?not match the available version. >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?? ? ?Message:? You requested >>>>>>>>>>> openshift_release >>>>>>>>>>> ???????????????? 3.7, >>>>>>>>>>> ???????????????? ??? which is not >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?matched by >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?the latest >>>>>>>>>>> OpenShift >>>>>>>>>>> RPM we >>>>>>>>>>> ???????????????? detected as >>>>>>>>>>> ???????????????? ??? origin-3.10.0 >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?on host localhost. >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?We will only >>>>>>>>>>> install the >>>>>>>>>>> latest >>>>>>>>>>> ???????????????? RPMs, so >>>>>>>>>>> ???????????????? ??? please >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?ensure >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?you are getting the release >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?you expect. You >>>>>>>>>>> may >>>>>>>>>>> need to >>>>>>>>>>> ???????????????? adjust your >>>>>>>>>>> ???????????????? ??? Ansible >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?inventory, modify the >>>>>>>>>>> repositories >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ?available on the >>>>>>>>>>> host, >>>>>>>>>>> or run >>>>>>>>>>> ???????????????? the appropriate >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?OpenShift >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?upgrade playbook. >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?? ? ? ? regards >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?? ? ? ? ? ? ? ? Peter >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?On 04/04/2018 09:13, Fred Rolland >>>>>>>>>>> wrote: >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> Hi, >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> Check these links: >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????????????????? >>>>>>>>>>> https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ >>>>>>>>>>> ???????????? >>>>>>>>>>> >>>>>>>>>>> ????????????? >>>>>>>>>>> >>>>>>>>>> ???????????? >>>>>>>>>>> > >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????? >>>>>>>>>>> ?????>>>>>>>>>> ???????????? >>>>>>>>>>> >>>>>>>>>>> ????????????? >>>>>>>>>>> >>>>>>>>>> ???????????? >>>>>>>>>>> >> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????? >>>>>>>>>>> https://ovirt.org/develop/release-management/features/metrics/metrics-store/ >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????? >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????? >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????? >>>>>>>>>>> > >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????? >>>>>>>>>>> ?????>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????? >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????? >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????? >>>>>>>>>>> >> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> Regards, >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> Fred >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> On Tue, Apr 3, 2018 at 9:38 AM, >>>>>>>>>>> Anantha >>>>>>>>>>> Raghava >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>> ???????????????? >>>>>>>>>>> ???????????????? ??? >>>>>>>>>> ???????????????? > >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ??>>>>>>>>>> ???????????????? >>>>>>>>>>> ???????????????? ??? >>>>>>>>>> ???????????????? >> >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ??>>>>>>>>>> ???????????????? >>>>>>>>>>> ???????????????? ??? >>>>>>>>>> ???????????????? > >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ??>>>>>>>>>> ???????????????? >>>>>>>>>>> ???????????????? ??? >>>>>>>>>> ???????????????? >>>> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> wrote: >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?>? ? ?Hi, >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?>? ? ?I see that oVirt DWH is >>>>>>>>>>> installed >>>>>>>>>>> with >>>>>>>>>>> ???????????????? Version >>>>>>>>>>> ???????????????? ??? 4.2.x. Now, how do I >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?>? ? ?take the reports? I version >>>>>>>>>>> 3.5, >>>>>>>>>>> we had >>>>>>>>>>> ???????????????? Jasper >>>>>>>>>>> ???????????????? ??? reports module using >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?>? ? ?which we could take >>>>>>>>>>> utilization >>>>>>>>>>> reports. >>>>>>>>>>> ???????????????? Can we do >>>>>>>>>>> ???????????????? ??? something similar >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?>? ? ?here? >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?>? ? ?-- >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?>? ? ?Thanks & Regards, >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?>? ? ?Anantha Raghava >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?>? ? ?Do not print this e-mail >>>>>>>>>>> unless >>>>>>>>>>> ???????????????? required. Save >>>>>>>>>>> ???????????????? ??? Paper & trees. >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ?????_______________________________________________ >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?>? ? ?Users mailing list >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> Users at ovirt.org >>>>>>>>>>> >>>>>>>>>>> ???????????????? >>>>>>>>>> > >>>>>>>>>>> ???????????????? ??? >>>>>>>>>> >>>>>>>>>>> ???????????????? >>>>>>>>>> >> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?>>>>>>>>>> ???????????????? >>>>>>>>>>> >>>>>>>>>> ???????????????? > >>>>>>>>>>> ???????????????? ??? >>>>>>>>>> >>>>>>>>>>> ???????????????? >>>>>>>>>> >>> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>>>> ???????????????? >>>>>>>>>>> ???????????????? ??? >>>>>>>>>>> >>>>>>>>>> ???????????????? >>>>>>>>>>> > >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ??>>>>>>>>>> ???????????????? >>>>>>>>>>> ???????????????? ??? >>>>>>>>>>> >>>>>>>>>> ???????????????? >>>>>>>>>>> >> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? ?>>>>>>>>>> ???????????????? >>>>>>>>>>> ???????????????? ??? >>>>>>>>>>> >>>>>>>>>> ???????????????? >>>>>>>>>>> > >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ??>>>>>>>>>> ???????????????? >>>>>>>>>>> ???????????????? >>>>>>>>>> ???????????????? >>>>>>>>>>> >>> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> _______________________________________________ >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> Users mailing list >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> Users at ovirt.org >>>>>>>>>>> >>>>>>>>>>> ???????????????? >>>>>>>>>> > >>>>>>>>>>> ???????????????? ??? >>>>>>>>>> >>>>>>>>>>> ???????????????? >>>>>>>>>> >> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>>>> ???????????????? >>>>>>>>>>> ???????????????? ??? >>>>>>>>>>> >>>>>>>>>> ???????????????? >>>>>>>>>>> > >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ??>>>>>>>>>> ???????????????? >>>>>>>>>>> ???????????????? ??? >>>>>>>>>>> >>>>>>>>>> ???????????????? >>>>>>>>>>> >> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?-- >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?*Peter Hudec* >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?Infra?trukt?rny architekt >>>>>>>>>>> ???????????????? ??? > phudec at cnc.sk >>>>>>>>>>> ???????????????? > >>>>>>>>>>> ???????????????? >>>>>>>>>>> ???????????????? ??? >>>>>>>>>> >> >>>>>>>>>>> ???????????????? >>>>>>>>>>> ???????????????? > >>>>>>>>>>> ???????????????? ??? >?????? ?>>>>>>>>>> >>>>>>>>>>> ???????????????? >>> >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?*CNC,?a.s.* >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?Borsk? 6,?841 04 Bratislava >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?Recepcia:?+421 2? 35 000 100 >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?Mobil:+421?905 997 203 >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?*www.cnc.sk >>>>>>>>>>> ???????????????? * >>>>>>>>>>> ???????????????? ??? >>>>>>>>>>> >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?> >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ?????_______________________________________________ >>>>>>>>>>> ???????????????? ??? >? ? ? ? ?Users mailing list >>>>>>>>>>> ???????????????? ??? > Users at ovirt.org >>>>>>>>>>> ???????????????? >>>>>>>>>> > >>>>>>>>>>> ???????????????? >>>>>>>>>> >>>>>>>>>>> ???????????????? ??? >>>>>>>>>> >> >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>>>> ???????????????? >>>>>>>>>>> ???????????????? ??? >>>>>>>>>>> >>>>>>>>>> ???????????????? >>>>>>>>>>> > >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ??>>>>>>>>>> ???????????????? >>>>>>>>>>> ???????????????? ??? >>>>>>>>>>> >>>>>>>>>> ???????????????? >>>>>>>>>>> >> >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ???????????????? ??? -- >>>>>>>>>>> ???????????????? ??? *Peter Hudec* >>>>>>>>>>> ???????????????? ??? Infra?trukt?rny architekt >>>>>>>>>>> ???????????????? ??? phudec at cnc.sk >>>>>>>>>>> ???????????????? > >>>>>>>>>>> ???????????????? >>>>>>>>>>> ???????????????? ??? >>>>>>>>>> >> >>>>>>>>>>> >>>>>>>>>>> ???????????????? ??? *CNC,?a.s.* >>>>>>>>>>> ???????????????? ??? Borsk? 6,?841 04 Bratislava >>>>>>>>>>> ???????????????? ??? Recepcia:?+421 2? 35 000 100 >>>>>>>>>>> >>>>>>>>>>> ???????????????? ??? Mobil:+421?905 997 203 >>>>>>>>>>> ???????????????? ??? *www.cnc.sk >>>>>>>>>>> * >>>>>>>>>>> ???????????????? >>>>>>>>>>> ???????????????? ??? > >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >> > -- *Peter Hudec* Infra?trukt?rny architekt phudec at cnc.sk *CNC,?a.s.* Borsk? 6,?841 04 Bratislava Recepcia:?+421 2? 35 000 100 Mobil:+421?905 997 203 *www.cnc.sk* From msivak at redhat.com Fri Apr 13 12:07:09 2018 From: msivak at redhat.com (Martin Sivak) Date: Fri, 13 Apr 2018 14:07:09 +0200 Subject: [ovirt-users] Hosted Engine won't start, how to debug? In-Reply-To: <0ca3f140-d196-b128-cfb2-a6b2b4aaf75f@ingenit.com> References: <0ca3f140-d196-b128-cfb2-a6b2b4aaf75f@ingenit.com> Message-ID: Hi, the serial console will show output if the kernel knows to use it. The VNC approach is also possible and I believe we already have a graphical device present. What you are looking for is probably this (VNC method is described there): https://www.ovirt.org/documentation/how-to/hosted-engine/#handle-engine-vm-boot-problems Best regards -- Martin Sivak SLA / oVirt On Fri, Apr 13, 2018 at 11:26 AM, Thomas Klute wrote: > Dear oVirt Team, > > after trying to reboot a hosted engine setup on oVirt 4.2 the VM won't > come up anymore. > The qemu-kvm process is there but we're unable to access the VM using > - the serial console (simply does not show anything, does not react to > characters typed) > - VNC / Spice because the hosted engine vm.conf does not contain any > graphics device. > > Before trying to reinstall, we'd like to recover and debug what is going on. > We mounted a Centos7 install .iso and started the VM using > hosted-engine --vm-start > --vm-conf=/var/run/ovirt-hosted-engine-ha/vm-custom.conf > But we still have to problem, that the serial console does not show > anything and there is no way to connect using VNC. > > So, what is the recommended way to move forward in such situation? > IMHO the classical way would be to add a graphics device and connect via > VNC? > I did not use the serial console much, up to now. Should the serial > console show any output during boot? > > Thanks for your help, > Thomas > > -- > ________________________________________________________________________ > > Dipl.-Inform. Thomas Klute klute at ingenit.com > Gesch?ftsf?hrer / CEO > ---------------------------------------------------------------------- > ingenit GmbH & Co. KG Tel. +49 (0)231 58 698-120 > Emil-Figge-Strasse 76-80 Fax. +49 (0)231 58 698-121 > D-44227 Dortmund www.ingenit.com > > Registergericht: Amtsgericht Dortmund, HRA 13 914 > Gesellschafter : Thomas Klute, Marc-Christian Schr?er > ________________________________________________________________________ > > _______________________________________________ > Users mailing list > Users at ovirt.org > http://lists.ovirt.org/mailman/listinfo/users From awels at redhat.com Fri Apr 13 12:16:45 2018 From: awels at redhat.com (Alexander Wels) Date: Fri, 13 Apr 2018 08:16:45 -0400 Subject: [ovirt-users] I broke my ovirt real good.... In-Reply-To: <816729cd-1ec6-f2e6-6986-2a18e83ab650@gmail.com> References: <816729cd-1ec6-f2e6-6986-2a18e83ab650@gmail.com> Message-ID: <2691691.Lu8XbsuI1x@awels> On Thursday, April 12, 2018 6:26:07 PM EDT ~Stack~ wrote: > Greetings, > > So I did a over-confident-admin-makes-rookie-mistake. I changed a bunch > of things all back-to-back and thus don't actually know what broke. :-D > > The only two real "big" changes were: > * Upgrade from 4.2.1 to 4.2.2 > * change my ovirtmgmt network > > The update I followed the upgrade procedures and I thought it all went > pretty well. Because I am moving it from a testing into what I hope will > be a more heavily used environment, I changed my ovirtmgmt network from > 192.168.100.0/24 to 192.168.101.0/24 via the web-gui. > > That was a touch tricker than just a change as I had to poke the > management engine host to be reachable on both network for a while, then > it just seemed OK. > > What's happening is: > * I can no longer migrate a vm from one host to the other. > * If I try to do a "reinstall" it dies. > * There is some serious network lag between my hosts on a 10Gb network. > * I've got all kinds of python2.4 failures in my vdsm and mom logs. > > Those are least the biggies. > > So while I was planning on moving this to a more active use case, right > now - it is all still my play ground. I would REALLY hate to lose the > VM's but everything else can go and be rebuilt. > > Given that I've somehow really broke this system pretty good, would it > be more advisable to blow away and rebuild it ALL or can I simply delete > the hypervisor hosts and rebuild them? > > Thoughts? > > Thanks! > ~Stack~ As long as you don't destroy the data on your data domain you can rebuild the engine and hosts and then import the existing data domain without too many issues. I have destroyed my engine database many times, and I am still using the same VMs from the same data domain. Here is what I do when I mess up my database to the point I have to make a new one: 1. Recreate the engine and database, so that I have basically have an empty engine with no hosts and VMs. 1.1 (Optional) make a new DC that is not default. and add a cluster. 2. Add my hosts (I only have 2 so that is quick and easy). 3. Add a throw away data domain (This is needed to get the DC up so I can import the existing data domain). 4. Import (NOT new, import) the existing data domain. 5. Do to Storage->Storage Domains->VM import and import the VMs I want. 6. Same for templates and disks if needed. 7. After you have imported the VMs/Templates/Disks you can detach and remove the throw away data domain and the one you imported becomes the master domain. Note if you want to move VMs between your play ground and more serious system you can simply detach your data domain from the play ground, then attach it to the serious engine (so you have 2 engines, one play ground and one serious) and import which VMs you want. That way you won't run into issues with configuring networks and stuff like you experienced. From M.Vrgotic at activevideo.com Fri Apr 13 09:49:37 2018 From: M.Vrgotic at activevideo.com (Vrgotic, Marko) Date: Fri, 13 Apr 2018 09:49:37 +0000 Subject: [ovirt-users] WARN VdsBroker Message-ID: Hi oVirt community, I have just upgraded from 4.2.0 to 4.2.2 version. I noticed a ton of : 2018-04-13 11:13:48,857+02 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerObjectsBuilder] (EE-ManagedThreadFactory-engineScheduled-Thread-84) [] Failed to convert app: [[Ljava.lang.Object;] is not a string 2018-04-13 11:13:48,857+02 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerObjectsBuilder] (EE-ManagedThreadFactory-engineScheduled-Thread-84) [] Failed to convert app: [[Ljava.lang.Object;] is not a string 2018-04-13 11:13:48,857+02 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerObjectsBuilder] (EE-ManagedThreadFactory-engineScheduled-Thread-84) [] Failed to convert app: [[Ljava.lang.Object;] is not a string 2018-04-13 11:13:48,857+02 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerObjectsBuilder] (EE-ManagedThreadFactory-engineScheduled-Thread-84) [] Failed to convert app: [[Ljava.lang.Object;] is not a string 2018-04-13 11:13:50,056+02 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerObjectsBuilder] (EE-ManagedThreadFactory-engineScheduled-Thread-93) [] Failed to convert app: [[Ljava.lang.Object;] is not a string 2018-04-13 11:13:51,482+02 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerObjectsBuilder] (EE-ManagedThreadFactory-engineScheduled-Thread-23) [] Failed to convert app: [[Ljava.lang.Object;] is not a string 2018-04-13 11:13:51,482+02 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerObjectsBuilder] (EE-ManagedThreadFactory-engineScheduled-Thread-23) [] Failed to convert app: [[Ljava.lang.Object;] is not a string 2018-04-13 11:13:51,483+02 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerObjectsBuilder] (EE-ManagedThreadFactory-engineScheduled-Thread-23) [] Failed to convert app: [[Ljava.lang.Object;] is not a string 2018-04-13 11:13:51,483+02 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerObjectsBuilder] (EE-ManagedThreadFactory-engineScheduled-Thread-23) [] Failed to convert app: [[Ljava.lang.Object;] is not a string 2018-04-13 11:14:03,912+02 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerObjectsBuilder] (EE-ManagedThreadFactory-engineScheduled-Thread-24) [] Failed to convert app: [[Ljava.lang.Object;] is not a string 2018-04-13 11:14:03,912+02 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerObjectsBuilder] (EE-ManagedThreadFactory-engineScheduled-Thread-24) [] Failed to convert app: [[Ljava.lang.Object;] is not a string 2018-04-13 11:14:03,912+02 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerObjectsBuilder] (EE-ManagedThreadFactory-engineScheduled-Thread-24) [] Failed to convert app: [[Ljava.lang.Object;] is not a string 2018-04-13 11:14:03,912+02 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerObjectsBuilder] (EE-ManagedThreadFactory-engineScheduled-Thread-24) [] Failed to convert app: [[Ljava.lang.Object;] is not a string 2018-04-13 11:14:05,120+02 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerObjectsBuilder] (EE-ManagedThreadFactory-engineScheduled-Thread-50) [] Failed to convert app: [[Ljava.lang.Object;] is not a string 2018-04-13 11:14:06,564+02 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerObjectsBuilder] (EE-ManagedThreadFactory-engineScheduled-Thread-60) [] Failed to convert app: [[Ljava.lang.Object;] is not a string 2018-04-13 11:14:06,564+02 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerObjectsBuilder] (EE-ManagedThreadFactory-engineScheduled-Thread-60) [] Failed to convert app: [[Ljava.lang.Object;] is not a string 2018-04-13 11:14:06,564+02 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerObjectsBuilder] (EE-ManagedThreadFactory-engineScheduled-Thread-60) [] Failed to convert app: [[Ljava.lang.Object;] is not a string 2018-04-13 11:14:06,564+02 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerObjectsBuilder] (EE-ManagedThreadFactory-engineScheduled-Thread-60) [] Failed to convert app: [[Ljava.lang.Object;] is not a string Can somebody help me understand or trace where the issue could be? Kindly awaiting your reply. Marko Vrgotic -------------- next part -------------- An HTML attachment was scrubbed... URL: From klute at ingenit.com Fri Apr 13 12:35:20 2018 From: klute at ingenit.com (Thomas Klute) Date: Fri, 13 Apr 2018 14:35:20 +0200 Subject: [ovirt-users] Hosted Engine won't start, how to debug? In-Reply-To: References: <0ca3f140-d196-b128-cfb2-a6b2b4aaf75f@ingenit.com> Message-ID: <7b411204-e171-2faf-9cf6-17ed353a6906@ingenit.com> Dear Martin, thanks for the feedback. We already read this and tried it. It seems to me that the graphics device was removed from the hosted engine by some ovirt release. If I try to set a console password I see this message: hosted-engine --add-console-password Enter password: no graphics devices configured Furthermore, there is nothing listening on port 5900 after that. The HostedEngine qemu process shows a " -display none " as parameter and I have no idea where this can be changed. I already created a /var/run/ovirt-hosted-engine-ha/vm-custom.conf containing: display=vnc kvmEnable=true But nothing changed. I also edited the HostedEngine VM config using virsh and added a vnc display: /usr/bin/virsh -c qemu:///system?authfile=/etc/ovirt-hosted-engine/virsh_auth.conf edit HostedEngine ??? ????? ??? ???