[ovirt-users] Engine reports
Shirly Radco
sradco at redhat.com
Wed Apr 4 15:41:23 UTC 2018
Hi,
I have a updated the installation instructions for installing OpenShift
3.9, based on Rich's work , for the oVirt use case.
Please make sure where you get the 3.10 rpm and disable that repo.
This is the PR that includes the metrics store installation of OpenShift 3.9
https://github.com/sradco/ovirt-site/blob/74f1e772c8ca75d4b9e57a3c02cce49c5030f7f7/source/develop/release-management/features/metrics/setting-up-viaq-logging.html.md
It should be merged soon, but you can use it to install.
Please make sure to add the ansible-inventory-origin-39-aio file as
described below.
These are required parameters for the ansible playbook.
Best regards,
--
SHIRLY RADCO
BI SeNIOR SOFTWARE ENGINEER
Red Hat Israel <https://www.redhat.com/>
<https://red.ht/sig>
TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
On Wed, Apr 4, 2018 at 5:41 PM, Rich Megginson <rmeggins at redhat.com> wrote:
> I'm sorry. I misunderstood the request.
>
> We are in the process of updating the instructions for installing viaq
> logging based on upstream origin 3.9 - https://github.com/ViaQ/Main/p
> ull/37
>
> In the meantime, you can follow along on that PR, and we will have
> instructions very soon.
>
>
> On 04/04/2018 08:26 AM, Rich Megginson wrote:
>
>> On 04/04/2018 08:22 AM, Shirly Radco wrote:
>>
>>>
>>>
>>> --
>>>
>>> SHIRLY RADCO
>>>
>>> BI SeNIOR SOFTWARE ENGINEER
>>>
>>> Red Hat Israel <https://www.redhat.com/>
>>>
>>> <https://red.ht/sig>
>>> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
>>>
>>>
>>> On Wed, Apr 4, 2018 at 5:07 PM, Peter Hudec <phudec at cnc.sk <mailto:
>>> phudec at cnc.sk>> wrote:
>>>
>>> almost the same issue, the versio for openshoft release changed to
>>> 3.9
>>>
>>> Failure summary:
>>>
>>>
>>> 1. Hosts: localhost
>>> Play: Determine openshift_version to configure on first
>>> master
>>> Task: For an RPM install, abort when the release
>>> requested does
>>> not match the available version.
>>> Message: You requested openshift_release 3.9, which is not
>>> matched by
>>> the latest OpenShift RPM we detected as origin-3.10.0
>>> on host localhost.
>>> We will only install the latest RPMs, so please ensure
>>> you are getting the release
>>> you expect. You may need to adjust your Ansible
>>> inventory, modify the repositories
>>> available on the host, or run the appropriate
>>> OpenShift
>>> upgrade playbook.
>>>
>>>
>>> What is the rpm version installed of OpenShift origin?
>>> Do you perhaps have another repo that includes the OpenShift
>>> origin-3.10.0?
>>>
>>
>> origin is the upstream version of OpenShift, which is unsupported.
>>
>> sudo repoquery -i origin
>>
>> This will tell you which repo it came from
>>
>> You will need to disable that repo and uninstall any packages which came
>> from that repo
>>
>> Another mystery is why it is trying to install origin in the first
>> place. openshift-ansible with openshift_deployment_type=openshift-enterprise
>> should not try to install origin, it should install packages with names
>> like atomic-openshift-master, atomic-openshift-node, etc.
>>
>>
>>>
>>>
>>> On 04/04/2018 14:18, Shirly Radco wrote:
>>> > Adding Nicolas since he hit the same issue.
>>> >
>>> > --
>>> >
>>> > SHIRLY RADCO
>>> >
>>> > BI SeNIOR SOFTWARE ENGINEER
>>> >
>>> > Red Hat Israel <https://www.redhat.com/>
>>> >
>>> > <https://red.ht/sig>
>>> > TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
>>> >
>>> >
>>> > On Wed, Apr 4, 2018 at 3:17 PM, Shirly Radco <sradco at redhat.com
>>> <mailto:sradco at redhat.com>
>>> > <mailto:sradco at redhat.com <mailto:sradco at redhat.com>>> wrote:
>>> >
>>> > Hi Peter,
>>> >
>>> > The installation instructions currently support OpenShift 3.6.
>>> >
>>> > I'm now working on updating them to support 3.9.
>>> >
>>> > You currently have 3.10 installed.
>>> >
>>> > Please install OpenShift 3.9 using this repository
>>> > https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo
>>> <https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo>
>>> > <https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo
>>> <https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo>>
>>> >
>>> > And add the following file to your vm
>>> >
>>> > Run:
>>> > vi /root/ansible-inventory-origin-39-aio
>>> >
>>> > Add:
>>> >
>>> > --------------
>>> > [OSEv3:children]
>>> > nodes
>>> > masters
>>> > etcd
>>> >
>>> > [OSEv3:vars]
>>> > ansible_connection=local
>>> > openshift_release=v3.9
>>> > openshift_logging_install_logging=true
>>> > short_version=3.9
>>> > openshift_deployment_type=origin
>>> > openshift_master_identity_providers=[{'mappingMethod': 'lookup',
>>> > 'challenge': 'true', 'login': 'true', 'kind':
>>> > 'AllowAllPasswordIdentityProvider', 'name': 'allow_all'}]
>>> > # bug - doesn't use correct tag
>>> > openshift_logging_image_version=v3.9
>>> > openshift_logging_elasticsearch_proxy_image_version=v1.0.0
>>> >
>>> > openshift_logging_es_allow_external=True
>>> > openshift_logging_use_mux=True
>>> > openshift_logging_mux_allow_external=True
>>> > openshift_logging_mux_file_buffer_storage_type=hostmount
>>> > openshift_logging_elasticsearch_storage_type=hostmount
>>> >
>>> openshift_logging_elasticsearch_hostmount_path=/var/lib/elasticsearch
>>> >
>>> > [nodes]
>>> > localhost storage=True openshift_node_labels="{'region':
>>> 'infra'}"
>>> > openshift_schedulable=True
>>> >
>>> > [masters]
>>> > localhost storage=True openshift_node_labels="{'region':
>>> 'infra'}"
>>> > openshift_schedulable=True
>>> >
>>> > [etcd]
>>> > localhost storage=True openshift_node_labels="{'region':
>>> 'infra'}"
>>> > openshift_schedulable=True
>>> >
>>> >
>>> > ------------
>>> >
>>> > Save and exit.
>>> >
>>> >
>>> > ***Please make sure that you use /var as your Elasticsearch
>>> > persistent storage directory.
>>> >
>>> > And when you run the OpenShift ansible
>>> >
>>> (https://www.ovirt.org/develop/release-management/features/
>>> metrics/setting-up-viaq-logging/#running-ansible
>>> <https://www.ovirt.org/develop/release-management/features/
>>> metrics/setting-up-viaq-logging/#running-ansible>
>>> >
>>> <https://www.ovirt.org/develop/release-management/features/
>>> metrics/setting-up-viaq-logging/#running-ansible
>>> <https://www.ovirt.org/develop/release-management/features/
>>> metrics/setting-up-viaq-logging/#running-ansible>>)
>>> > use the file you just created like this:
>>> >
>>> > # cd /usr/share/ansible/openshift-ansible
>>> > # (or wherever you cloned the git repo if using git)
>>> > ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e
>>> > @/root/vars.yaml -i /root/*ansible-inventory-origin-39-aio*
>>> > playbooks/byo/config.yml
>>> >
>>> > Best regards,
>>> >
>>> > --
>>> >
>>> > SHIRLY RADCO
>>> >
>>> > BI SeNIOR SOFTWARE ENGINEER
>>> >
>>> > Red Hat Israel <https://www.redhat.com/>
>>> >
>>> > <https://red.ht/sig>
>>> > TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
>>> >
>>> >
>>> > On Wed, Apr 4, 2018 at 12:17 PM, Peter Hudec <phudec at cnc.sk
>>> <mailto:phudec at cnc.sk>
>>> > <mailto:phudec at cnc.sk <mailto:phudec at cnc.sk>>> wrote:
>>> >
>>> > Tried to install ovirt metrics, but got error
>>> >
>>> > ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e
>>> > @/root/vars.yaml -i /root/ansible-inventory-origin-37-aio
>>> > playbooks/byo/config.yml
>>> >
>>> > 1. Hosts: localhost
>>> > Play: Determine openshift_version to configure
>>> on first
>>> > master
>>> > Task: For an RPM install, abort when the release
>>> > requested does
>>> > not match the available version.
>>> > Message: You requested openshift_release 3.7,
>>> which is not
>>> > matched by
>>> > the latest OpenShift RPM we detected as
>>> origin-3.10.0
>>> > on host localhost.
>>> > We will only install the latest RPMs, so
>>> please
>>> > ensure
>>> > you are getting the release
>>> > you expect. You may need to adjust your
>>> Ansible
>>> > inventory, modify the repositories
>>> > available on the host, or run the
>>> appropriate
>>> > OpenShift
>>> > upgrade playbook.
>>> >
>>> > regards
>>> > Peter
>>> >
>>> >
>>> > On 04/04/2018 09:13, Fred Rolland wrote:
>>> > > Hi,
>>> > >
>>> > > Check these links:
>>> > >
>>> > >
>>> https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/
>>> <https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/>
>>> >
>>> <https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/
>>> <https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/>>
>>> > >
>>> https://ovirt.org/develop/release-management/features/metric
>>> s/metrics-store/
>>> <https://ovirt.org/develop/release-management/features/metri
>>> cs/metrics-store/>
>>> > <https://ovirt.org/develop/release-management/features/metr
>>> ics/metrics-store/
>>> <https://ovirt.org/develop/release-management/features/metri
>>> cs/metrics-store/>>
>>> > >
>>> > > Regards,
>>> > > Fred
>>> > >
>>> > > On Tue, Apr 3, 2018 at 9:38 AM, Anantha Raghava
>>> > > <raghav at exzatechconsulting.com
>>> <mailto:raghav at exzatechconsulting.com>
>>> > <mailto:raghav at exzatechconsulting.com
>>> <mailto:raghav at exzatechconsulting.com>>
>>> > <mailto:raghav at exzatechconsulting.com
>>> <mailto:raghav at exzatechconsulting.com>
>>> > <mailto:raghav at exzatechconsulting.com
>>> <mailto:raghav at exzatechconsulting.com>>>>
>>> > > wrote:
>>> > >
>>> > > Hi,
>>> > >
>>> > > I see that oVirt DWH is installed with Version
>>> 4.2.x. Now, how do I
>>> > > take the reports? I version 3.5, we had Jasper
>>> reports module using
>>> > > which we could take utilization reports. Can we do
>>> something similar
>>> > > here?
>>> > >
>>> > > --
>>> > >
>>> > > Thanks & Regards,
>>> > >
>>> > >
>>> > > Anantha Raghava
>>> > >
>>> > >
>>> > > Do not print this e-mail unless required. Save
>>> Paper & trees.
>>> > >
>>> > >
>>> > > _______________________________________________
>>> > > Users mailing list
>>> > > Users at ovirt.org <mailto:Users at ovirt.org>
>>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
>>> > <mailto:Users at ovirt.org <mailto:Users at ovirt.org>
>>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>>
>>> > > http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>
>>> > <http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>>
>>> > > <http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>
>>> > <http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>>>
>>> > >
>>> > >
>>> > >
>>> > >
>>> > > _______________________________________________
>>> > > Users mailing list
>>> > > Users at ovirt.org <mailto:Users at ovirt.org>
>>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
>>> > > http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>
>>> > <http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>>
>>> > >
>>> >
>>> >
>>> > --
>>> > *Peter Hudec*
>>> > Infraštruktúrny architekt
>>> > phudec at cnc.sk <mailto:phudec at cnc.sk> <mailto:phudec at cnc.sk
>>> <mailto:phudec at cnc.sk>> <mailto:phudec at cnc.sk <mailto:phudec at cnc.sk>
>>> > <mailto:phudec at cnc.sk <mailto:phudec at cnc.sk>>>
>>> >
>>> > *CNC, a.s.*
>>> > Borská 6, 841 04 Bratislava
>>> > Recepcia: +421 2 35 000 100
>>> >
>>> > Mobil:+421 905 997 203
>>> > *www.cnc.sk <http://www.cnc.sk> <http://www.cnc.sk>*
>>> <http:///www.cnc.sk <http://www.cnc.sk>
>>> > <http://www.cnc.sk>>
>>> >
>>> > _______________________________________________
>>> > Users mailing list
>>> > Users at ovirt.org <mailto:Users at ovirt.org> <mailto:Users at ovirt.org
>>> <mailto:Users at ovirt.org>>
>>> > http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>
>>> > <http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>>
>>> >
>>> >
>>> >
>>>
>>>
>>> --
>>> *Peter Hudec*
>>> Infraštruktúrny architekt
>>> phudec at cnc.sk <mailto:phudec at cnc.sk> <mailto:phudec at cnc.sk
>>> <mailto:phudec at cnc.sk>>
>>>
>>> *CNC, a.s.*
>>> Borská 6, 841 04 Bratislava
>>> Recepcia: +421 2 35 000 100
>>>
>>> Mobil:+421 905 997 203
>>> *www.cnc.sk <http://www.cnc.sk>* <http:///www.cnc.sk
>>> <http://www.cnc.sk>>
>>>
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20180404/701a16cc/attachment.html>
More information about the Users
mailing list