[ovirt-users] Engine reports
Peter Hudec
phudec at cnc.sk
Thu Apr 5 16:57:22 UTC 2018
Since it's still not installed, yes ;)
On 05/04/2018 16:11, Rich Megginson wrote:
> Is it possible that you could start over from scratch, using the latest
> instructions/files at
> https://github.com/ViaQ/Main/pull/37/files?
>
> On 04/05/2018 07:19 AM, Peter Hudec wrote:
>> The version is from
>>
>> /usr/share/ansible/openshift-ansible/roles/openshift_facts/library/openshift_facts.py:get_openshift_version
>>
>>
>> [PROD] root at dipostat01.cnc.sk: /usr/share/ansible/openshift-ansible #
>> /usr/bin/openshift version
>> openshift v3.10.0-alpha.0+f0186dd-401
>> kubernetes v1.9.1+a0ce1bc657
>> etcd 3.2.16
>>
>> this binary is from the origin-3.7.2-1.el7.git.0.f0186dd.x86_64 package
>>
>> [PROD] root at dipostat01.cnc.sk: ~ # rpm -qf /usr/bin/openshift
>> origin-3.7.2-1.el7.git.0.f0186dd.x86_64
>>
>> Hmm, why the version do not match ?
>>
>> Peter
>>
>> On 04/04/2018 17:41, Shirly Radco wrote:
>>> Hi,
>>>
>>>
>>> I have a updated the installation instructions for installing OpenShift
>>> 3.9, based on Rich's work , for the oVirt use case.
>>>
>>> Please make sure where you get the 3.10 rpm and disable that repo.
>>>
>>> This is the PR that includes the metrics store installation of
>>> OpenShift 3.9
>>>
>>> https://github.com/sradco/ovirt-site/blob/74f1e772c8ca75d4b9e57a3c02cce49c5030f7f7/source/develop/release-management/features/metrics/setting-up-viaq-logging.html.md
>>>
>>>
>>> It should be merged soon, but you can use it to install.
>>>
>>>
>>> Please make sure to add the ansible-inventory-origin-39-aio file as
>>> described below.
>>> These are required parameters for the ansible playbook.
>>>
>>>
>>> Best regards,
>>>
>>> --
>>>
>>> SHIRLY RADCO
>>>
>>> BI SeNIOR SOFTWARE ENGINEER
>>>
>>> Red Hat Israel <https://www.redhat.com/>
>>>
>>> <https://red.ht/sig>
>>> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
>>>
>>>
>>> On Wed, Apr 4, 2018 at 5:41 PM, Rich Megginson <rmeggins at redhat.com
>>> <mailto:rmeggins at redhat.com>> wrote:
>>>
>>> I'm sorry. I misunderstood the request.
>>>
>>> We are in the process of updating the instructions for installing
>>> viaq logging based on upstream origin 3.9 -
>>> https://github.com/ViaQ/Main/pull/37
>>> <https://github.com/ViaQ/Main/pull/37>
>>>
>>> In the meantime, you can follow along on that PR, and we will have
>>> instructions very soon.
>>>
>>>
>>> On 04/04/2018 08:26 AM, Rich Megginson wrote:
>>>
>>> On 04/04/2018 08:22 AM, Shirly Radco wrote:
>>>
>>>
>>>
>>> --
>>>
>>> SHIRLY RADCO
>>>
>>> BI SeNIOR SOFTWARE ENGINEER
>>>
>>> Red Hat Israel <https://www.redhat.com/>
>>>
>>> <https://red.ht/sig>
>>> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
>>>
>>>
>>> On Wed, Apr 4, 2018 at 5:07 PM, Peter Hudec <phudec at cnc.sk
>>> <mailto:phudec at cnc.sk> <mailto:phudec at cnc.sk
>>> <mailto:phudec at cnc.sk>>> wrote:
>>>
>>> almost the same issue, the versio for openshoft release
>>> changed to 3.9
>>>
>>> Failure summary:
>>>
>>>
>>> 1. Hosts: localhost
>>> Play: Determine openshift_version to configure
>>> on first
>>> master
>>> Task: For an RPM install, abort when the
>>> release
>>> requested does
>>> not match the available version.
>>> Message: You requested openshift_release 3.9,
>>> which is not
>>> matched by
>>> the latest OpenShift RPM we detected as
>>> origin-3.10.0
>>> on host localhost.
>>> We will only install the latest RPMs, so
>>> please ensure
>>> you are getting the release
>>> you expect. You may need to adjust your
>>> Ansible
>>> inventory, modify the repositories
>>> available on the host, or run the
>>> appropriate OpenShift
>>> upgrade playbook.
>>>
>>>
>>> What is the rpm version installed of OpenShift origin?
>>> Do you perhaps have another repo that includes the
>>> OpenShift
>>> origin-3.10.0?
>>>
>>>
>>> origin is the upstream version of OpenShift, which is
>>> unsupported.
>>>
>>> sudo repoquery -i origin
>>>
>>> This will tell you which repo it came from
>>>
>>> You will need to disable that repo and uninstall any packages
>>> which came from that repo
>>>
>>> Another mystery is why it is trying to install origin in the
>>> first place. openshift-ansible with
>>> openshift_deployment_type=openshift-enterprise should not
>>> try to
>>> install origin, it should install packages with names like
>>> atomic-openshift-master, atomic-openshift-node, etc.
>>>
>>>
>>>
>>>
>>> On 04/04/2018 14:18, Shirly Radco wrote:
>>> > Adding Nicolas since he hit the same issue.
>>> >
>>> > --
>>> >
>>> > SHIRLY RADCO
>>> >
>>> > BI SeNIOR SOFTWARE ENGINEER
>>> >
>>> > Red Hat Israel <https://www.redhat.com/>
>>> >
>>> > <https://red.ht/sig>
>>> > TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
>>> >
>>> >
>>> > On Wed, Apr 4, 2018 at 3:17 PM, Shirly Radco
>>> <sradco at redhat.com <mailto:sradco at redhat.com>
>>> <mailto:sradco at redhat.com <mailto:sradco at redhat.com>>
>>> > <mailto:sradco at redhat.com <mailto:sradco at redhat.com>
>>> <mailto:sradco at redhat.com <mailto:sradco at redhat.com>>>>
>>> wrote:
>>> >
>>> > Hi Peter,
>>> >
>>> > The installation instructions currently support
>>> OpenShift 3.6.
>>> >
>>> > I'm now working on updating them to support 3.9.
>>> >
>>> > You currently have 3.10 installed.
>>> >
>>> > Please install OpenShift 3.9 using this
>>> repository
>>> >
>>> https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo
>>>
>>> <https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo>
>>> <https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo
>>>
>>> <https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo>>
>>> >
>>>
>>> <https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo
>>>
>>> <https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo>
>>> <https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo
>>>
>>> <https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo>>>
>>> >
>>> > And add the following file to your vm
>>> >
>>> > Run:
>>> > vi /root/ansible-inventory-origin-39-aio
>>> >
>>> > Add:
>>> >
>>> > --------------
>>> > [OSEv3:children]
>>> > nodes
>>> > masters
>>> > etcd
>>> >
>>> > [OSEv3:vars]
>>> > ansible_connection=local
>>> > openshift_release=v3.9
>>> > openshift_logging_install_logging=true
>>> > short_version=3.9
>>> > openshift_deployment_type=origin
>>> >
>>> openshift_master_identity_providers=[{'mappingMethod':
>>> 'lookup',
>>> > 'challenge': 'true', 'login': 'true', 'kind':
>>> > 'AllowAllPasswordIdentityProvider', 'name':
>>> 'allow_all'}]
>>> > # bug - doesn't use correct tag
>>> > openshift_logging_image_version=v3.9
>>> >
>>> openshift_logging_elasticsearch_proxy_image_version=v1.0.0
>>> >
>>> > openshift_logging_es_allow_external=True
>>> > openshift_logging_use_mux=True
>>> > openshift_logging_mux_allow_external=True
>>> >
>>> openshift_logging_mux_file_buffer_storage_type=hostmount
>>> >
>>> openshift_logging_elasticsearch_storage_type=hostmount
>>> >
>>>
>>> openshift_logging_elasticsearch_hostmount_path=/var/lib/elasticsearch
>>> >
>>> > [nodes]
>>> > localhost storage=True
>>> openshift_node_labels="{'region':
>>> 'infra'}"
>>> > openshift_schedulable=True
>>> >
>>> > [masters]
>>> > localhost storage=True
>>> openshift_node_labels="{'region':
>>> 'infra'}"
>>> > openshift_schedulable=True
>>> >
>>> > [etcd]
>>> > localhost storage=True
>>> openshift_node_labels="{'region':
>>> 'infra'}"
>>> > openshift_schedulable=True
>>> >
>>> >
>>> > ------------
>>> >
>>> > Save and exit.
>>> >
>>> >
>>> > ***Please make sure that you use /var as your
>>> Elasticsearch
>>> > persistent storage directory.
>>> >
>>> > And when you run the OpenShift ansible
>>> >
>>>
>>> (https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible
>>>
>>>
>>> <https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible>
>>>
>>>
>>> <https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible
>>>
>>>
>>> <https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible>>
>>>
>>> >
>>>
>>> <https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible
>>>
>>>
>>> <https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible>
>>>
>>>
>>> <https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible
>>>
>>>
>>> <https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible>>>)
>>>
>>> > use the file you just created like this:
>>> >
>>> > # cd /usr/share/ansible/openshift-ansible
>>> > # (or wherever you cloned the git repo if
>>> using git)
>>> > ANSIBLE_LOG_PATH=/tmp/ansible.log
>>> ansible-playbook
>>> -vvv -e
>>> > @/root/vars.yaml -i
>>> /root/*ansible-inventory-origin-39-aio*
>>> > playbooks/byo/config.yml
>>> >
>>> > Best regards,
>>> >
>>> > --
>>> >
>>> > SHIRLY RADCO
>>> >
>>> > BI SeNIOR SOFTWARE ENGINEER
>>> >
>>> > Red Hat Israel <https://www.redhat.com/>
>>> >
>>> > <https://red.ht/sig>
>>> > TRIED. TESTED. TRUSTED.
>>> <https://redhat.com/trusted>
>>> >
>>> >
>>> > On Wed, Apr 4, 2018 at 12:17 PM, Peter Hudec
>>> <phudec at cnc.sk <mailto:phudec at cnc.sk> <mailto:phudec at cnc.sk
>>> <mailto:phudec at cnc.sk>>
>>> > <mailto:phudec at cnc.sk <mailto:phudec at cnc.sk>
>>> <mailto:phudec at cnc.sk <mailto:phudec at cnc.sk>>>> wrote:
>>> >
>>> > Tried to install ovirt metrics, but got error
>>> >
>>> > ANSIBLE_LOG_PATH=/tmp/ansible.log
>>> ansible-playbook -vvv -e
>>> > @/root/vars.yaml -i
>>> /root/ansible-inventory-origin-37-aio
>>> > playbooks/byo/config.yml
>>> >
>>> > 1. Hosts: localhost
>>> > Play: Determine openshift_version to
>>> configure
>>> on first
>>> > master
>>> > Task: For an RPM install, abort when
>>> the release
>>> > requested does
>>> > not match the available version.
>>> > Message: You requested
>>> openshift_release
>>> 3.7,
>>> which is not
>>> > matched by
>>> > the latest OpenShift RPM we
>>> detected as
>>> origin-3.10.0
>>> > on host localhost.
>>> > We will only install the
>>> latest
>>> RPMs, so
>>> please
>>> > ensure
>>> > you are getting the release
>>> > you expect. You may need to
>>> adjust your
>>> Ansible
>>> > inventory, modify the repositories
>>> > available on the host, or run
>>> the appropriate
>>> > OpenShift
>>> > upgrade playbook.
>>> >
>>> > regards
>>> > Peter
>>> >
>>> >
>>> > On 04/04/2018 09:13, Fred Rolland wrote:
>>> > > Hi,
>>> > >
>>> > > Check these links:
>>> > >
>>> > >
>>>
>>> https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/
>>>
>>> <https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/>
>>> <https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/
>>>
>>> <https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/>>
>>> >
>>>
>>> <https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/
>>>
>>> <https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/>
>>> <https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/
>>>
>>> <https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/>>>
>>> > >
>>>
>>> https://ovirt.org/develop/release-management/features/metrics/metrics-store/
>>>
>>>
>>> <https://ovirt.org/develop/release-management/features/metrics/metrics-store/>
>>>
>>>
>>> <https://ovirt.org/develop/release-management/features/metrics/metrics-store/
>>>
>>>
>>> <https://ovirt.org/develop/release-management/features/metrics/metrics-store/>>
>>>
>>> >
>>>
>>> <https://ovirt.org/develop/release-management/features/metrics/metrics-store/
>>>
>>>
>>> <https://ovirt.org/develop/release-management/features/metrics/metrics-store/>
>>>
>>>
>>> <https://ovirt.org/develop/release-management/features/metrics/metrics-store/
>>>
>>>
>>> <https://ovirt.org/develop/release-management/features/metrics/metrics-store/>>>
>>>
>>> > >
>>> > > Regards,
>>> > > Fred
>>> > >
>>> > > On Tue, Apr 3, 2018 at 9:38 AM, Anantha
>>> Raghava
>>> > > <raghav at exzatechconsulting.com
>>> <mailto:raghav at exzatechconsulting.com>
>>> <mailto:raghav at exzatechconsulting.com
>>> <mailto:raghav at exzatechconsulting.com>>
>>> > <mailto:raghav at exzatechconsulting.com
>>> <mailto:raghav at exzatechconsulting.com>
>>> <mailto:raghav at exzatechconsulting.com
>>> <mailto:raghav at exzatechconsulting.com>>>
>>> > <mailto:raghav at exzatechconsulting.com
>>> <mailto:raghav at exzatechconsulting.com>
>>> <mailto:raghav at exzatechconsulting.com
>>> <mailto:raghav at exzatechconsulting.com>>
>>> > <mailto:raghav at exzatechconsulting.com
>>> <mailto:raghav at exzatechconsulting.com>
>>> <mailto:raghav at exzatechconsulting.com
>>> <mailto:raghav at exzatechconsulting.com>>>>>
>>> > > wrote:
>>> > >
>>> > > Hi,
>>> > >
>>> > > I see that oVirt DWH is installed with
>>> Version
>>> 4.2.x. Now, how do I
>>> > > take the reports? I version 3.5, we had
>>> Jasper
>>> reports module using
>>> > > which we could take utilization
>>> reports.
>>> Can we do
>>> something similar
>>> > > here?
>>> > >
>>> > > --
>>> > >
>>> > > Thanks & Regards,
>>> > >
>>> > >
>>> > > Anantha Raghava
>>> > >
>>> > >
>>> > > Do not print this e-mail unless
>>> required. Save
>>> Paper & trees.
>>> > >
>>> > >
>>> > >
>>> _______________________________________________
>>> > > Users mailing list
>>> > > Users at ovirt.org <mailto:Users at ovirt.org>
>>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
>>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>
>>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>>
>>> > <mailto:Users at ovirt.org
>>> <mailto:Users at ovirt.org> <mailto:Users at ovirt.org
>>> <mailto:Users at ovirt.org>>
>>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>
>>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>>>
>>> > >
>>> http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>
>>> <http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>>
>>> > <http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>
>>> <http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>>>
>>> > >
>>> <http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>
>>> <http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>>
>>> > <http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>
>>> <http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>>>>
>>> > >
>>> > >
>>> > >
>>> > >
>>> > >
>>> _______________________________________________
>>> > > Users mailing list
>>> > > Users at ovirt.org <mailto:Users at ovirt.org>
>>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
>>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>
>>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>>
>>> > >
>>> http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>
>>> <http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>>
>>> > <http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>
>>> <http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>>>
>>> > >
>>> >
>>> >
>>> > --
>>> > *Peter Hudec*
>>> > Infraštruktúrny architekt
>>> > phudec at cnc.sk <mailto:phudec at cnc.sk>
>>> <mailto:phudec at cnc.sk <mailto:phudec at cnc.sk>>
>>> <mailto:phudec at cnc.sk <mailto:phudec at cnc.sk>
>>> <mailto:phudec at cnc.sk <mailto:phudec at cnc.sk>>>
>>> <mailto:phudec at cnc.sk <mailto:phudec at cnc.sk>
>>> <mailto:phudec at cnc.sk <mailto:phudec at cnc.sk>>
>>> > <mailto:phudec at cnc.sk <mailto:phudec at cnc.sk>
>>> <mailto:phudec at cnc.sk <mailto:phudec at cnc.sk>>>>
>>> >
>>> > *CNC, a.s.*
>>> > Borská 6, 841 04 Bratislava
>>> > Recepcia: +421 2 35 000 100
>>> >
>>> > Mobil:+421 905 997 203
>>> > *www.cnc.sk <http://www.cnc.sk>
>>> <http://www.cnc.sk> <http://www.cnc.sk>*
>>> <http:///www.cnc.sk <http://www.cnc.sk>
>>> <http://www.cnc.sk>
>>> > <http://www.cnc.sk>>
>>> >
>>> >
>>> _______________________________________________
>>> > Users mailing list
>>> > Users at ovirt.org <mailto:Users at ovirt.org>
>>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
>>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>
>>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>>
>>> > http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>
>>> <http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>>
>>> > <http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>
>>> <http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>>>
>>> >
>>> >
>>> >
>>>
>>>
>>> --
>>> *Peter Hudec*
>>> Infraštruktúrny architekt
>>> phudec at cnc.sk <mailto:phudec at cnc.sk>
>>> <mailto:phudec at cnc.sk <mailto:phudec at cnc.sk>>
>>> <mailto:phudec at cnc.sk <mailto:phudec at cnc.sk>
>>> <mailto:phudec at cnc.sk <mailto:phudec at cnc.sk>>>
>>>
>>> *CNC, a.s.*
>>> Borská 6, 841 04 Bratislava
>>> Recepcia: +421 2 35 000 100
>>>
>>> Mobil:+421 905 997 203
>>> *www.cnc.sk <http://www.cnc.sk> <http://www.cnc.sk>*
>>> <http:///www.cnc.sk <http://www.cnc.sk>
>>> <http://www.cnc.sk>>
>>>
>>>
>>>
>>>
>>>
>>
>
--
*Peter Hudec*
Infraštruktúrny architekt
phudec at cnc.sk <mailto:phudec at cnc.sk>
*CNC, a.s.*
Borská 6, 841 04 Bratislava
Recepcia: +421 2 35 000 100
Mobil:+421 905 997 203
*www.cnc.sk* <http:///www.cnc.sk>
More information about the Users
mailing list