[ovirt-users] Decrease downtime for HA

[Michal Skrivanek]

> On 12 Apr 2018, at 13:13, Daniel Menzel <daniel.menzel at hhi.fraunhofer.de> wrote:
> 
> Hi there,
> 
> does anyone have an idea how to decrease a virtual machine's downtime?
> 
> Best
> Daniel
> 
> On 06.04.2018 13:34, Daniel Menzel wrote:
>> Hi Michal,
>> 
>> 

Hi Daniel,
adding Martin to review fencing behavior
>> (sorry for misspelling your name in my first mail).
>> 
>> 

that’s not the reason I’m replying late!:-))

>> The settings for the VMs are the following (oVirt 4.2):
>> 
>> HA checkbox enabled of course
>> "Target Storage Domain for VM Lease" -> left empty

if you need faster reactions then try to use VM Leases as well, it won’t make a difference in this case but will help in case of network issues. E.g. if you use iSCSI and the storage connection breaks while host connection still works it would restart the VM in about 80s; otherwise it would take >5 mins. 
>> "Resume Behavior" -> AUTO_RESUME
>> Priority for Migration -> High
>> "Watchdog Model" -> No-Watchdog
>> For testing we did not kill any VM but the host. So basically we simulated an instantaneous crash by manually turning the machine off via IPMI-Interface (not via operating system!) and ping the guest(s). What happens then?
>> 
>> 2-3 seconds after the we press the host's shutdown button we lose ping contact to the VM(s).
>> After another 20s oVirt changes the host's status to "connecting", the VM's status is set to a question mark.
>> After ~1:30 the host is flagged to "non responsive”

that sounds about right. Now fencing action should have been initiated, if you can share the engine logs we can confirm that. IIRC we first try soft fencing - try to ssh to that host, that might take some time to time out I guess. Martin?
>> After ~2:10 the host's reboot is initiated by oVirt, 5-10s later the guest is back online.
>> So, there seems to be one mistake I made in the first mail: The downtime is "only" 2.5min. But still I think this time can be decreased as for some services it is still quite a long time.
>> 
>> 

these values can be tuned down, but then you may be more susceptible to fencing power cycling a host in case of shorter network outages. It may be ok…depending on your requirements.
>> Best
>> Daniel
>> 
>> On 06.04.2018 12:49, Michal Skrivanek wrote:
>>>> On 6 Apr 2018, at 12:45, Daniel Menzel <daniel.menzel at hhi.fraunhofer.de> <mailto:daniel.menzel at hhi.fraunhofer.de> wrote:
>>>> 
>>>> Hi Michael,
>>>> thanks for your mail. Sorry, I forgot to write that. Yes, we have power management and fencing enabled on all hosts. We also tested this and found out that it works perfectly. So this cannot be the reason I guess.
>>> Hi Daniel,
>>> ok, then it’s worth looking into details. Can you describe in more detail what happens? What exact settings you’re using for such VM? Are you killing the HE VM or other VMs or both? Would be good to narrow it down a bit and then review the exact flow
>>> 
>>> Thanks,
>>> michal
>>> 
>>>> Daniel
>>>> 
>>>> 
>>>> 
>>>> On 06.04.2018 11:11, Michal Skrivanek wrote:
>>>>>> On 4 Apr 2018, at 15:36, Daniel Menzel <daniel.menzel at hhi.fraunhofer.de> <mailto:daniel.menzel at hhi.fraunhofer.de> wrote:
>>>>>> 
>>>>>> Hello,
>>>>>> 
>>>>>> we're successfully using a setup with 4 Nodes and a replicated Gluster for storage. The engine is self hosted. What we're dealing with at the moment is the high availability: If a node fails (for example simulated by a forced power loss) the engine comes back up online withing ~2min. But guests (having the HA option enabled) come back online only after a very long grace time of ~5min. As we have a reliable network (40 GbE) and reliable servers I think that the default grace times are way too high for us - is there any possibility to change those values?
>>>>> And do you have Power Management(iLO, iDRAC,etc) configured for your hosts? Otherwise we have to resort to relatively long timeouts to make sure the host is really dead
>>>>> Thanks,
>>>>> michal
>>>>>> Thanks in advance!
>>>>>> Daniel
>>>>>> 
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users at ovirt.org <mailto:Users at ovirt.org>
>>>>>> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
>>>>>> 
>>>>>> 
>> 
>> 
>> 
>> _______________________________________________
>> Users mailing list
>> Users at ovirt.org <mailto:Users at ovirt.org>
>> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
> 
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20180412/cf835efd/attachment.html>