[ovirt-users] Hosted Engine won't start, how to debug?
Thomas Klute
klute at ingenit.com
Mon Apr 16 07:59:34 UTC 2018
Dear Martin,
thanks, ok, good to know. We have a hosted engine that was created on
ovirt 3.x and after that has only been updated.
Maybe this is the cause.
Thanks for your help again.
Best regards,
Thomas
> Hi,
>
> the vnc device is there by default (I copied it out of my own hosted
> engine instance), I do not know why it was missing in your case.
>
> Best regards
>
> Martin Sivak
>
> On Fri, Apr 13, 2018 at 5:13 PM, Thomas Klute <klute at ingenit.com> wrote:
>> Dear Martin,
>>
>> yes, that worked. Thank you so much!!
>> We were able to see that the latest kernel update failed and did not
>> create the initramfs file and thus the boot process failed with a kernel
>> panic.
>>
>> Debugging this problem took us many hours... It felt so complicated to
>> connect a vnc to this vm - compared to a bare metal setup with display
>> and keyboard.
>> Wouldn't it be a good idea to have the vnc device in the config by default?
>>
>> Best regards,
>> Thomas
>>
>>> You need to be in global maintenance, but I think you already know that.
>>> Then try updating the vm.conf like you already did and add this line:
>>>
>>> devices={device:vnc,type:graphics,deviceId:f1d0394e-b077-4ea6-99e5-b9b6b8fe073c,address:None}
>>>
>>> Then restart the VM using hosted-engine commands and try the VNC approach again.
>>>
>>> Best regards
>>>
>>> Martin Sivak
>>>
>>> On Fri, Apr 13, 2018 at 2:35 PM, Thomas Klute <klute at ingenit.com> wrote:
>>>> Dear Martin,
>>>>
>>>> thanks for the feedback.
>>>> We already read this and tried it.
>>>> It seems to me that the graphics device was removed from the hosted
>>>> engine by some ovirt release.
>>>>
>>>> If I try to set a console password I see this message:
>>>>
>>>> hosted-engine --add-console-password
>>>> Enter password:
>>>> no graphics devices configured
>>>>
>>>> Furthermore, there is nothing listening on port 5900 after that.
>>>> The HostedEngine qemu process shows a " -display none " as parameter and
>>>> I have no idea where this can be changed.
>>>>
>>>> I already created a /var/run/ovirt-hosted-engine-ha/vm-custom.conf
>>>> containing:
>>>> display=vnc
>>>> kvmEnable=true
>>>>
>>>> But nothing changed.
>>>> I also edited the HostedEngine VM config using virsh and added a vnc
>>>> display:
>>>> /usr/bin/virsh -c
>>>> qemu:///system?authfile=/etc/ovirt-hosted-engine/virsh_auth.conf edit
>>>> HostedEngine
>>>>
>>>> <graphics type='vnc' port='12355' autoport='no' listen='0.0.0.0'>
>>>> <listen type='address' address='0.0.0.0'/>
>>>> </graphics>
>>>> <video>
>>>> <model type='qxl' ram='65536' vram='65536' vgamem='16384'
>>>> heads='1' primary='yes'/>
>>>> <address type='pci' domain='0x0000' bus='0x00' slot='0x07'
>>>> function='0x0'/>
>>>> </video>
>>>>
>>>> But there is still "display none" passed as command line parameter to
>>>> qemu and thus, I suppose, there's no display.
>>>>
>>>> Any help is appreciated, thanks,
>>>> Thomas
>>>>
>>>>
>>>>> Hi,
>>>>>
>>>>> the serial console will show output if the kernel knows to use it.
>>>>>
>>>>> The VNC approach is also possible and I believe we already have a
>>>>> graphical device present. What you are looking for is probably this
>>>>> (VNC method is described there):
>>>>> https://www.ovirt.org/documentation/how-to/hosted-engine/#handle-engine-vm-boot-problems
>>>>>
>>>>> Best regards
>>>>>
>>>>> --
>>>>> Martin Sivak
>>>>> SLA / oVirt
>>>>>
>>>>> On Fri, Apr 13, 2018 at 11:26 AM, Thomas Klute <klute at ingenit.com> wrote:
>>>>>> Dear oVirt Team,
>>>>>>
>>>>>> after trying to reboot a hosted engine setup on oVirt 4.2 the VM won't
>>>>>> come up anymore.
>>>>>> The qemu-kvm process is there but we're unable to access the VM using
>>>>>> - the serial console (simply does not show anything, does not react to
>>>>>> characters typed)
>>>>>> - VNC / Spice because the hosted engine vm.conf does not contain any
>>>>>> graphics device.
>>>>>>
>>>>>> Before trying to reinstall, we'd like to recover and debug what is going on.
>>>>>> We mounted a Centos7 install .iso and started the VM using
>>>>>> hosted-engine --vm-start
>>>>>> --vm-conf=/var/run/ovirt-hosted-engine-ha/vm-custom.conf
>>>>>> But we still have to problem, that the serial console does not show
>>>>>> anything and there is no way to connect using VNC.
>>>>>>
>>>>>> So, what is the recommended way to move forward in such situation?
>>>>>> IMHO the classical way would be to add a graphics device and connect via
>>>>>> VNC?
>>>>>> I did not use the serial console much, up to now. Should the serial
>>>>>> console show any output during boot?
>>>>>>
>>>>>> Thanks for your help,
>>>>>> Thomas
>>>>>>
>>>>>> --
>>>>>> ________________________________________________________________________
>>>>>>
>>>>>> Dipl.-Inform. Thomas Klute klute at ingenit.com
>>>>>> Geschäftsführer / CEO
>>>>>> ----------------------------------------------------------------------
>>>>>> ingenit GmbH & Co. KG Tel. +49 (0)231 58 698-120
>>>>>> Emil-Figge-Strasse 76-80 Fax. +49 (0)231 58 698-121
>>>>>> D-44227 Dortmund www.ingenit.com
>>>>>>
>>>>>> Registergericht: Amtsgericht Dortmund, HRA 13 914
>>>>>> Gesellschafter : Thomas Klute, Marc-Christian Schröer
>>>>>> ________________________________________________________________________
>>>>>>
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users at ovirt.org
>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>> Sollten noch Fragen offen sein, stehen wir Ihnen natürlich jederzeit
>>>> gerne zur Verfügung.
>>>>
>>>> Mit Grüßen aus Dortmund,
>>>> Thomas Klute
>>>>
>>>> --
>>>> ________________________________________________________________________
>>>>
>>>> Dipl.-Inform. Thomas Klute klute at ingenit.com
>>>> Geschäftsführer / CEO
>>>> ----------------------------------------------------------------------
>>>> ingenit GmbH & Co. KG Tel. +49 (0)231 58 698-120
>>>> Emil-Figge-Strasse 76-80 Fax. +49 (0)231 58 698-121
>>>> D-44227 Dortmund www.ingenit.com
>>>>
>>>> Registergericht: Amtsgericht Dortmund, HRA 13 914
>>>> Gesellschafter : Thomas Klute, Marc-Christian Schröer
>>>> ________________________________________________________________________
>>>>
>> Sollten noch Fragen offen sein, stehen wir Ihnen natürlich jederzeit
>> gerne zur Verfügung.
>>
>> Mit Grüßen aus Dortmund,
>> Thomas Klute
>>
>> --
>> ________________________________________________________________________
>>
>> Dipl.-Inform. Thomas Klute klute at ingenit.com
>> Geschäftsführer / CEO
>> ----------------------------------------------------------------------
>> ingenit GmbH & Co. KG Tel. +49 (0)231 58 698-120
>> Emil-Figge-Strasse 76-80 Fax. +49 (0)231 58 698-121
>> D-44227 Dortmund www.ingenit.com
>>
>> Registergericht: Amtsgericht Dortmund, HRA 13 914
>> Gesellschafter : Thomas Klute, Marc-Christian Schröer
>> ________________________________________________________________________
>>
>
Sollten noch Fragen offen sein, stehen wir Ihnen natürlich jederzeit
gerne zur Verfügung.
Mit Grüßen aus Dortmund,
Thomas Klute
--
________________________________________________________________________
Dipl.-Inform. Thomas Klute klute at ingenit.com
Geschäftsführer / CEO
----------------------------------------------------------------------
ingenit GmbH & Co. KG Tel. +49 (0)231 58 698-120
Emil-Figge-Strasse 76-80 Fax. +49 (0)231 58 698-121
D-44227 Dortmund www.ingenit.com
Registergericht: Amtsgericht Dortmund, HRA 13 914
Gesellschafter : Thomas Klute, Marc-Christian Schröer
________________________________________________________________________
More information about the Users
mailing list