[ovirt-users] Partition Trouble on oVirt Node

[Alex K]

Did you try partprobe and pvscan before pvcreate?

On Feb 16, 2018 01:23, "Matt Simonsen" <matt at khoza.com> wrote:

> Hello all,
>
> This may not be oVirt specific (but it may be) so thank you in advance for
> any assistance.
>
> I have a system installed with oVirt Node Next 4.1.9 that was installed to
> /dev/sda
>
> I had a seperate RAID Volume /dev/sdb that should not have been used, but
> now that the operating system is loaded I'm struggling to get the device
> partitioned.
>
> I've tried mkfs.ext4 on the device and also pvcreate, with the errors
> below. I've also rebooted a couple times and tried to disable multipathd.
> Is multipathd even safe to disable on Node Next?
>
> Below are the errors I've received, and thank you again for any tips.
>
>
> [root at node1-g6-h3 ~]# mkfs.ext4 /dev/sdb
> mke2fs 1.42.9 (28-Dec-2013)
> /dev/sdb is entire device, not just one partition!
> Proceed anyway? (y,n) y
> /dev/sdb is apparently in use by the system; will not make a filesystem
> here!
> [root at node1-g6-h3 ~]# gdisk
> GPT fdisk (gdisk) version 0.8.6
>
> Type device filename, or press <Enter> to exit: /dev/sdb
> Caution: invalid main GPT header, but valid backup; regenerating main
> header
> from backup!
>
> Caution! After loading partitions, the CRC doesn't check out!
> Warning! Main partition table CRC mismatch! Loaded backup partition table
> instead of main partition table!
>
> Warning! One or more CRCs don't match. You should repair the disk!
>
> Partition table scan:
>   MBR: not present
>   BSD: not present
>   APM: not present
>   GPT: damaged
>
> Found invalid MBR and corrupt GPT. What do you want to do? (Using the
> GPT MAY permit recovery of GPT data.)
>  1 - Use current GPT
>  2 - Create blank GPT
>
> Your answer: 2
>
> Command (? for help): n
> Partition number (1-128, default 1):
> First sector (34-16952264590, default = 2048) or {+-}size{KMGTP}:
> Last sector (2048-16952264590, default = 16952264590) or {+-}size{KMGTP}:
> Current type is 'Linux filesystem'
> Hex code or GUID (L to show codes, Enter = 8300): 8e00
> Changed type of partition to 'Linux LVM'
>
> Command (? for help): w
>
> Final checks complete. About to write GPT data. THIS WILL OVERWRITE
> EXISTING
> PARTITIONS!!
>
> Do you want to proceed? (Y/N): y
> OK; writing new GUID partition table (GPT) to /dev/sdb.
> The operation has completed successfully.
> [root at node1-g6-h3 ~]# pvcreate /dev/sdb1
>   Device /dev/sdb1 not found (or ignored by filtering).
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20180216/2fc4cdf6/attachment.html>