[ovirt-users] Power management - oVirt 4,2

Terry hey recreationh at gmail.com
Wed Feb 28 08:13:57 UTC 2018 

Dear Martin,
Please see the following result.
[root at XXXXX ~]# fence_ilo4 -a XXX.XXX.XXX.XXX -l XXXXX -p XXXXX -v -o status
Executing: /usr/bin/ipmitool -I lanplus -H XXX.XXX.XXX.XXX -p 623 -U XXXXX
-P XXXXX -L ADMINISTRATOR chassis power status

Connection timed out


[root at XXXXX~]#
As you can see it just said connection timed out.
But i can actually access iLO5 ( same account and password) through
Internet Explorer ,

I want to ask.. do you know what port did the manger use when compile this
command?

Regards
Terry


2018-02-26 17:38 GMT+08:00 Martin Perina <mperina at redhat.com>:

>
>
> On Fri, Feb 23, 2018 at 11:34 AM, Terry hey <recreationh at gmail.com> wrote:
>
>> Dear Martin,
>> I am very sorry that i reply you so late.
>> Do you mean that 4.2 can support ilo5 by selecting the option "ilo4" in
>> power management?
>>
>
> ​Yes
> ​
>
>
>> "from the error message below I'd say that you are either not using
>> correct IP address of iLO5 interface or you haven't enabled remote access
>> to your iLO5 interface"
>> I just try it and double confirm that i did not type a wrong IP. But the
>> error message is same.
>>
>
> ​Unfortunately I don't have iLO5 server available, so I cannot provide
> more details. Anyway could you please double check your server
> documentation, that you have enabled access to iLO5 IPMI interface
> correctly? And could you please share output of following command?
>
> ​
> f
> ​​
> ence_ilo4 -a <IP_ADDRESS> -l <USERNAME> -p <PASSWORD> -v -o status
>
> Thanks
>
> Martin
> ​
>
>
>>
>> Regards
>> Terry
>>
>> 2018-02-08 16:13 GMT+08:00 Martin Perina <mperina at redhat.com>:
>>
>>> Hi Terry,
>>>
>>> from the error message below I'd say that you are either not using
>>> correct IP address of iLO5 interface or you haven't enabled remote access
>>> to your iLO5 interface.
>>> According to [1] iLO5 should fully IPMI compatible. So are you sure that
>>> you enabled the remote access to your iLO5 address in iLO5 management?
>>> Please consult [1] how to enable everything and use a user with at least
>>> Operator privileges.
>>>
>>> Regards
>>>
>>> Martin
>>>
>>> [1] https://support.hpe.com/hpsc/doc/public/display?docId=a00018324en_us
>>>
>>>
>>> On Thu, Feb 8, 2018 at 7:57 AM, Terry hey <recreationh at gmail.com> wrote:
>>>
>>>> Dear Martin,
>>>>
>>>> Thank you for helping me. To answer your question,
>>>> 1. Does the Test in Edit fence agent dialog work​?
>>>> Ans: it shows that "Test failed: Internal JSON-RPC error"
>>>>
>>>> Regardless the fail result, i press "OK" to enable power management.
>>>> There are four event log appear in "Events"
>>>> ********************************The follwing are the log in
>>>> "Event""********************************
>>>> Host host01 configuration was updated by admin at internal-authz.
>>>> Kdump integration is enabled for host hostv01, but kdump is not
>>>> configured properly on host.
>>>> Health check on Host host01 indicates that future attempts to Stop this
>>>> host using Power-Management are expected to fail.
>>>> Health check on Host host01 indicates that future attempts to Start
>>>> this host using Power-Management are expected to fail.
>>>>
>>>> 2. If not could you please try to install fence-agents-all package on
>>>> different host and execute?
>>>> Ans: It just shows "Connection timed out".
>>>>
>>>> So, does it means that it is not support iLo5 now or i configure
>>>> wrongly?
>>>>
>>>> Regards,
>>>> Terry
>>>>
>>>> 2018-02-02 15:46 GMT+08:00 Martin Perina <mperina at redhat.com>:
>>>>
>>>>>
>>>>>
>>>>> On Fri, Feb 2, 2018 at 5:40 AM, Terry hey <recreationh at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Dear Martin,
>>>>>>
>>>>>> Um..Since i am going to use HPE ProLiant DL360 Gen10 Server to setup
>>>>>> oVirt Node(Hypervisor). HP G10 is using ilo5 rather than ilo4. Therefore, i
>>>>>> would like to ask whether oVirt power management support iLO5 or not.
>>>>>>
>>>>>
>>>>> ​We don't have any hardware with iLO5 available, but there is a good
>>>>> chance that it will be compatible with iLO4. Have you tried to setup your
>>>>> server with iLO4? Does the Test in Edit fence agent dialog work​? If not
>>>>> could you please try to install fence-agents-all package on different host
>>>>> and execute following:
>>>>>
>>>>> ​​
>>>>> f
>>>>> ​​
>>>>> ence_ilo4 -a <IP_ADDRESS> -l <USERNAME> -p <PASSWORD> -v -o status
>>>>>
>>>>> and share the output?
>>>>>
>>>>> Thanks
>>>>>
>>>>> Martin
>>>>>
>>>>>
>>>>>> If not, do you have any idea to setup power management with HP G10?
>>>>>>
>>>>>> Regards,
>>>>>> Terry
>>>>>>
>>>>>> 2018-02-01 16:21 GMT+08:00 Martin Perina <mperina at redhat.com>:
>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Jan 31, 2018 at 11:19 PM, Luca 'remix_tj' Lorenzetto <
>>>>>>> lorenzetto.luca at gmail.com> wrote:
>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> From ilo3 and up, ilo fencing agents are an alias for fence_ipmi.
>>>>>>>> Try using the standard ipmi.
>>>>>>>>
>>>>>>>
>>>>>>> ​It's not just an alias, ilo3/ilo4 also have different defaults than
>>>>>>> ipmilan. For example if you use ilo4, then by default following is used:
>>>>>>>
>>>>>>> ​
>>>>>>>
>>>>>>> ​lanplus=1
>>>>>>>  power_wait=4
>>>>>>>
>>>>>>> ​So I recommend to start with ilo4 and add any necessary custom
>>>>>>> options into Options field. If you need some custom
>>>>>>> options, could you please share them with us? It would be very
>>>>>>> helpful for us, if needed we could introduce ilo5 with
>>>>>>> different defaults then ilo4
>>>>>>>
>>>>>>> Thanks
>>>>>>>
>>>>>>> Martin
>>>>>>>
>>>>>>>
>>>>>>>> Luca
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> Il 31 gen 2018 11:14 PM, "Terry hey" <recreationh at gmail.com> ha
>>>>>>>> scritto:
>>>>>>>>
>>>>>>>>> Dear all,
>>>>>>>>> Did oVirt 4.2 Power management support iLO5 as i could not see
>>>>>>>>> iLO5 option in Power Management.
>>>>>>>>>
>>>>>>>>> Regards
>>>>>>>>> Terry
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Users mailing list
>>>>>>>>> Users at ovirt.org
>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>>
>>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Users mailing list
>>>>>>>> Users at ovirt.org
>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Martin Perina
>>>>>>> Associate Manager, Software Engineering
>>>>>>> Red Hat Czech s.r.o.
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Martin Perina
>>>>> Associate Manager, Software Engineering
>>>>> Red Hat Czech s.r.o.
>>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> Martin Perina
>>> Associate Manager, Software Engineering
>>> Red Hat Czech s.r.o.
>>>
>>
>>
>
>
> --
> Martin Perina
> Associate Manager, Software Engineering
> Red Hat Czech s.r.o.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20180228/aca1dfc1/attachment.html>

More information about the Users mailing list