[ovirt-users] Need input please.

Sun Jan 7 14:38:17 UTC 2018

On Sun, Jan 7, 2018 at 4:19 PM, carl langlois <crl.langlois at gmail.com>
wrote:

> Hi all,
>
> So i got a bit futher on getting everithing back on. After removing the
> ca.epem certificate and redoing engine-setup on the hosted-engine vm i was
> able to remove/reinstall one of my 2 hosts. Now i am facing a other
> problem. I need this new host to be able to run the hosted engine vm. But
> if re-install the host and in the hosted engine tab set to DEPLOY the host
> is add successfully and can run vms but it seem that the DEPLOY did not
> work..
>
> If i am not able to make this host run the engine vm i cant
> fix(re-install) the second host.
>
> Any insight would be appreciated.
>

If you can attach logs, that'd be great.
Y.

>
> Thanks.
>
>
>
> On Sat, Jan 6, 2018 at 12:40 PM, carl langlois <crl.langlois at gmail.com>
> wrote:
>
>> Yes i have try removing it and re-adding it and i have the problem with
>> certifcate enrollement..
>>
>>
>>
>> On Sat, Jan 6, 2018 at 12:08 PM, Donny Davis <donny at fortnebula.com>
>> wrote:
>>
>>> Have you tried to remove that host and readd it?
>>>
>>> Also there is a bug that throws the same error, not sure if its related.
>>> Did you have your hosts in maintenance prior to upgrading?
>>>
>>> https://bugzilla.redhat.com/show_bug.cgi?id=1258589
>>>
>>> On Sat, Jan 6, 2018 at 10:52 AM, carl langlois <crl.langlois at gmail.com>
>>> wrote:
>>>
>>>> Hi
>>>> I have put the new engine_enrolfail.log that conain the error when
>>>> re-installing .
>>>>
>>>>
>>>> https://drive.google.com/drive/folders/1tZHLIMV0ctGyeDPcGMlJ
>>>> a6evk6fkrCz8?usp=sharing
>>>>
>>>>
>>>> Thanks
>>>>
>>>> On Sat, Jan 6, 2018 at 10:18 AM, Benny Zlotnik <bzlotnik at redhat.com>
>>>> wrote:
>>>>
>>>>> Can you please provide the log with the error?
>>>>>
>>>>> On Sat, Jan 6, 2018 at 5:09 PM, carl langlois <crl.langlois at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hi again,
>>>>>>
>>>>>> I manage to go a little bit further.. I was not able to set one host
>>>>>> to maintenance because they had running vm.. so i force it to mark it as
>>>>>> reboot  and flush any vm and now i can try to reinstall the host.. but now
>>>>>> i am getting error when the installation try to enroll certificate..
>>>>>>
>>>>>> Any idea?
>>>>>>
>>>>>> Thanks
>>>>>> Carl
>>>>>>
>>>>>>
>>>>>> On Sat, Jan 6, 2018 at 9:41 AM, carl langlois <crl.langlois at gmail.com
>>>>>> > wrote:
>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> Thanks for the quick reply.
>>>>>>>
>>>>>>> Version before the update was the latest 4.1.
>>>>>>> The storage is NFS.
>>>>>>> The host are plain 7.4 Centos.i keep them up to date
>>>>>>> if i remenber the initail deploy of the engine vm was full OS
>>>>>>>
>>>>>>> The step to upgrade was:
>>>>>>>
>>>>>>> SSH to hosted engine vm ,
>>>>>>> yum install 4.2 release
>>>>>>> run engine-setup.
>>>>>>> this where i think something when wrong.
>>>>>>> the engine setup was not able to update some certificate.. a quick
>>>>>>> search on the internet and found that moving the ca.pem from the
>>>>>>> /etc/pki/ovrit-engine made the engine-setup work..
>>>>>>>
>>>>>>> from that point the hosted_engine seem to work fine but all hosts
>>>>>>> and data center are not operational.
>>>>>>>
>>>>>>> One of my main concern is losing all the template and users vm..
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Engine and vdsm log of one host are here..
>>>>>>>
>>>>>>> In the engine log there is a lot of this error..
>>>>>>>
>>>>>>> 2018-01-06 08:31:40,459-05 ERROR [org.ovirt.engine.core.vdsbrok
>>>>>>> er.vdsbroker.GetCapabilitiesVDSCommand]
>>>>>>> (EE-ManagedThreadFactory-engineScheduled-Thread-9) [] Command
>>>>>>> 'GetCapabilitiesVDSCommand(HostName = hosted_engine_2,
>>>>>>> VdsIdAndVdsVDSCommandParametersBase:{hostId='7d2b3f49-0fbb-493b-8f3c-5283566e830d',
>>>>>>> vds='Host[hosted_engine_2,7d2b3f49-0fbb-493b-8f3c-5283566e830d]'})'
>>>>>>> execution failed: VDSGenericException: VDSNetworkException: General
>>>>>>> SSLEngine problem.
>>>>>>>
>>>>>>> https://drive.google.com/drive/folders/1tZHLIMV0ctGyeDPcGMlJ
>>>>>>> a6evk6fkrCz8?usp=sharing
>>>>>>>
>>>>>>> Thanks for your support
>>>>>>>
>>>>>>> Carl
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Sat, Jan 6, 2018 at 8:50 AM, Gianluca Cecchi <
>>>>>>> gianluca.cecchi at gmail.com> wrote:
>>>>>>>
>>>>>>>> On Sat, Jan 6, 2018 at 2:42 PM, carl langlois <
>>>>>>>> crl.langlois at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Hi again all,
>>>>>>>>>
>>>>>>>>> I really need your input on recovering my failed upgrade to 4.2.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>> First two things to do to get appropriate help would be, in my
>>>>>>>> opinion:
>>>>>>>>
>>>>>>>> 1) provide a detailed description of your environment
>>>>>>>> exact version before the update; kind of storage (Gluster, NFS,
>>>>>>>> iSCSI, FC), kind of hosts (plain OS and which version or node-ng and which
>>>>>>>> version before and after), kind of deploy executed for hosted engine VM at
>>>>>>>> initial install time (appliance, full OS).
>>>>>>>> Describe steps used for upgrading.
>>>>>>>>
>>>>>>>> 2) upload to a shared file services all the possible logs:
>>>>>>>> engine logs before and after the upgrade and logs of engine-setup
>>>>>>>> run during update
>>>>>>>> vdsm logs before and after the upgrade
>>>>>>>>
>>>>>>>>
>>>>>>>> Gianluca
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users at ovirt.org
>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>
>>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>
>>>>
>>>
>>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20180107/80247142/attachment.html>