[ovirt-users] oVirt 4.1 change ovirtmgmt to enable VLAN tagging

[Staniforth, Paul]

Hello Luca,

                 We are keeping the VLAN ID the same so would this work, not being a network expert can the same VLAN be tagged and native on the same port?


Thanks,

            Paul S.

________________________________
From: Luca 'remix_tj' Lorenzetto <lorenzetto.luca at gmail.com>
Sent: 22 January 2018 19:10
To: Staniforth, Paul
Cc: users
Subject: Re: [ovirt-users] oVirt 4.1 change ovirtmgmt to enable VLAN tagging



Il 22 gen 2018 7:49 PM, "Staniforth, Paul" <P.Staniforth at leedsbeckett.ac.uk<mailto:P.Staniforth at leedsbeckett.ac.uk>> ha scritto:

Hello,

         We have an oVirt 4.1  cluster of 3 ovirt-nodes that currently on the management network don't have VLAN tagging enabled, we would like to enable VLAN tagging and so would be grateful of anyone had an information or experience doing this.


The management engine is running on a separate host and the 3 hosts are running oVirt Node 4.1.6

Hi Paul, i did the same with the same release.

The trick was to set the tagging also of the default vlan on the switch during the change from untagged to tagged.

In example, if you have to move your ovirtmgmt to vlan 10, you can set your port for serving the network both native and tagged so while changing the ovirtmgmt setup you will not lose the connectivity.

Luca
To view the terms under which this email is distributed, please go to:-
http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20180123/0856249b/attachment.html>