[ovirt-users] Ovirt and OVH vRack

[Fabien Carré]

Hello,
Thank you for the answer.

I'll try your solution.
Fabien

On Thu, 15 Mar 2018 at 11:59 Dominik Holler <dholler at redhat.com> wrote:

> On Thu, 15 Mar 2018 09:09:41 +0000
> Fabien Carré <carre.fabien at gmail.com> wrote:
>
> > Hello,
> > I am trying to set up an oVirt environment using OVH servers. So far
> > I have installed an engine (4.2) and a node. The node is attached to
> > a NAS through a vRack
> > https://www.ovh.co.uk/solutions/vrack/network-technology.xml. I am
> > using one vlan to connect it, which is the management network
> >
> >
> > However it is not a perfect setup (cf attached screenshot). The
> > management network is in  "Out-of-Sync" state.
> > on the node :
> > # ip addr
> > 28: eno4.100 at eno4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
> > noqueue master ovirtmgmt state UP qlen 1000
> >     link/ether 0c:c4:ff:7a:6c:13 brd ff:ff:ff:ff:ff:ff
> > 29: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
> > noqueue state UP qlen 1000
> >     link/ether 0c:c4:ff:7a:6c:13 brd ff:ff:ff:ff:ff:ff
> >     inet 10.100.0.11/24 brd 10.100.0.255 scope global ovirtmgmt
> >        valid_lft forever preferred_lft forever
> >
> >
> > [image: Screenshot from 2018-03-15 09-03-37.png]
> > It does not seem possible to add extra vlan. I wanted to have one for
> > the vms and one for the hosts.
> > Can you give me some help or guidance ?
> >
> > Also generally speaking do you think such a setup is fine ?
> >
> > Thank you
> > Fabien
>
>
> If you are limited to a single VLAN, I would use this as a single
> logical network in oVirt. To isolate the traffic between VMs, I
> would use external logical networks on the ovirt-provider-ovn.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20180315/e41160ab/attachment.html>