[ovirt-users] [Gluster-users] GlusterFS performance with only one drive per host?
Manoj Pillai
mpillai at redhat.com
Fri Mar 23 03:03:16 UTC 2018
On Thu, Mar 22, 2018 at 3:31 PM, Sahina Bose <sabose at redhat.com> wrote:
>
>
> On Mon, Mar 19, 2018 at 5:57 PM, Jayme <jaymef at gmail.com> wrote:
>
>> I'm spec'ing a new oVirt build using three Dell R720's w/ 256GB. I'm
>> considering storage options. I don't have a requirement for high amounts
>> of storage, I have a little over 1TB to store but want some overhead so I'm
>> thinking 2TB of usable space would be sufficient.
>>
>> I've been doing some research on Micron 1100 2TB ssd's and they seem to
>> offer a lot of value for the money. I'm considering using smaller cheaper
>> SSDs for boot drives and using one 2TB micron SSD in each host for a
>> glusterFS replica 3 setup (on the fence about using an arbiter, I like the
>> extra redundancy replicate 3 will give me).
>>
>> My question is, would I see a performance hit using only one drive in
>> each host with glusterFS or should I try to add more physical disks. Such
>> as 6 1TB drives instead of 3 2TB drives?
>>
>
It is possible. With SSDs the rpc layer can become the bottleneck with some
workloads, especially if there are not enough connections out to the server
side. We had experimented with a multi-connection model for this reason:
https://review.gluster.org/#/c/19133/.
-- Manoj
>
> [Adding gluster-users for inputs here]
>
>
>> Also one other question. I've read that gluster can only be done in
>> groups of three. Meaning you need 3, 6, or 9 hosts. Is this true? If I
>> had an operational replicate 3 glusterFS setup and wanted to add more
>> capacity I would have to add 3 more hosts, or is it possible for me to add
>> a 4th host in to the mix for extra processing power down the road?
>>
>
> In oVirt, we support replica 3 or replica 3 with arbiter (where one of the
> 3 bricks is a low storage arbiter brick). To expand storage, you would need
> to add in multiples of 3 bricks. However if you only want to expand compute
> capacity in your HC environment, you can add a 4th node.
>
>
>> Thanks!
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://lists.gluster.org/mailman/listinfo/gluster-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20180323/182fc7e9/attachment.html>
More information about the Users
mailing list