Ok here are the log files. It installs most packages and then hangs up on libjpeg? libjpeg is installed including dev package. This is a bare-metal node running fedora 16 with vdsm packages installed from repo. Your node .iso 2.2.1 does not initialize realtek nic cards so I can not use that. The 2.2.1 .iso sees the nic card but that is it. So I went the route of installing the full fedora 16 distro and installing vdsm packages from repo. I am bridged correctly and ssl=false in the vdsm.conf. Now when I go to the ovirt management gui and install the node it fails at this step. I can see the node in ovirt management gui just an fyi so not a problem with detection. It seems that the vdsm server will not start due to libjpeg install failure but mabey I am wrong.<br>
<br>Let me know what you think,<br><br>Dominic<br><br><div class="gmail_quote">On Sun, Jan 15, 2012 at 4:11 AM, Doron Fediuck <span dir="ltr"><<a href="mailto:dfediuck@redhat.com">dfediuck@redhat.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div class="HOEnZb"><div class="h5">On Saturday 14 January 2012 16:04:27 Dominic Kaiser wrote:<br>
> I have recently set up an ovirt engine server and one host. The ovirt<br>
> engine server was installed on a small Intell Atom quad core with 4 gigs of<br>
> ram box. The ovirt engine server is running on Fedora 16 and engine was<br>
> installed from rpms after I added the repo. Also I have installed one host<br>
> or node if you prefer That is an AMD quad core with 8 gigs of ram and has<br>
> virtualization. I have tried installing from ovirt node 2.2.1 iso but<br>
> ethernet card can not be intialized even though it is detected. This is a<br>
> realtek card and it shows up fine in fedora 16. The iso is still a bit<br>
> buggy for me so I tried installing fedora 16 and then the vdsm rpm packages<br>
> from repository. I have correctly set up a bridge on fedora 16 and by the<br>
> way your instructions are wrong for bridge setup. I will be glad to send<br>
> you guys a correct config for the wiki if neccessary for fedora 16. Vdsm<br>
> is running and I installed host from the ovirt gui by adding new host<br>
> entered ip config an.d it appeared in the ovirt web manager. What it does<br>
> not do properly is install on the Ovirt web manager I get installing then<br>
> it says install failed. I have tried reinstalling from the ovirt web<br>
> manager to no avail. The wiki is a good start but directions are lacking I<br>
> must say. Is there any more config that needs to be done on the vdsm.conf<br>
> file in etc/vdsm/vdsm.conf or does it just "detect" when the Ovirt web<br>
> manager calls for it? I am probably missing something on my end I am<br>
> guessing. Also what log files would be helpful to look at? I will be<br>
> trying this out also on a new asus server with two 8 core amd opterons and<br>
> 32 gigs of ram shortly so I will let you know how that goes also. This<br>
> project is great I just need to get a working host and I want to write a<br>
> simpler install write up for this project that in my opinion is what it is<br>
> lacking.<br>
><br>
> Let me know,<br>
<br>
</div></div>Hi Dominic,<br>
If I get you right, you have set a bridge and manually installed vdsm using<br>
RPM's.<br>
When you add a host from the web UI, it's actually trying to do what you<br>
did, but it should be a problem. So... let's try to figure out the real issue;<br>
If you SSH into your vdsm host (node), you'll find under /tmp the installation<br>
log files.<br>
Please verify there's no sensitive data there, and send to list.<br>
We'll continue based on the logs.<br>
<span class="HOEnZb"><font color="#888888"><br>
Doron.<br>
</font></span></blockquote></div><br><br clear="all"><br>-- <br>Dominic Kaiser<br>Greater Boston Vineyard<br>Director of Operations<br><br>cell: 617-230-1412<br>fax: 617-252-0238<br>email: <a href="mailto:dominic@bostonvineyard.org">dominic@bostonvineyard.org</a><br>
<br><br>