<div dir="ltr">Hello,<div>I&#39;m going to setup an environment where I will have 2 hosts and each with 2 adapters to connect to storage domain(s). This will be a test environment, not a production one.</div><div>The storage domain(s) will be NFS, provided by a Netapp system.</div><div>The hosts have 4 x 1Gb/s adapters and I think to use 2 for ovirtmgmt and VMs (through bonding and VLANs) and to dedicate the other 2 adapters to the NFS domain connectivity.</div><div>What would be the best setup to have both HA on the connection and also using the whole 2Gb/s in normal load scenario? </div><div>Is it better to make more storage domains (and more svm on Netapp side) or only one?</div><div>What would be the suitable bonding mode to put on adapters? I normally use 802.3ad provided by the switches, but I&#39;m not sure if in this configuration I can use both the network adapters for the overall load of the different VMs that I would have in place...</div><div><br></div><div>Thanks in advance for every suggestion,</div><div><br></div><div>Gianluca</div></div>