[ovirt-devel] Name resolution not working after vdsm installation

[Piotr Kliczewski]

On Wed, Apr 25, 2018 at 11:45 AM, Martin Sivak <msivak at redhat.com> wrote:
> IPv6 only DNS? Cool (if it works) :)

It used to :)

>
> Martin
>
> On Wed, Apr 25, 2018 at 11:43 AM, Piotr Kliczewski
> <piotr.kliczewski at gmail.com> wrote:
>> In addition here is my resolv.conf
>>
>> ; generated by /usr/sbin/dhclient-script
>> nameserver 2001:730:3ed2::53
>> nameserver 2001:730:3ed2:1000::53
>> search localdomain
>>
>> On Wed, Apr 25, 2018 at 11:26 AM, Piotr Kliczewski
>> <piotr.kliczewski at gmail.com> wrote:
>>> All,
>>>
>>> I am using latest engine and vdsm 4.20.23-1. I installed vdsm on
>>> centos7 vm and after the installation my vm stopped resolving names.
>>>
>>> Here is my nic configuration before installation:
>>>
>>> TYPE="Ethernet"
>>> BOOTPROTO="dhcp"
>>> DEFROUTE="yes"
>>> PEERDNS="yes"
>>> PEERROUTES="yes"
>>> IPV4_FAILURE_FATAL="no"
>>> IPV6INIT="yes"
>>> IPV6_AUTOCONF="yes"
>>> IPV6_DEFROUTE="yes"
>>> IPV6_PEERDNS="yes"
>>> IPV6_PEERROUTES="yes"
>>> IPV6_FAILURE_FATAL="no"
>>> NAME="eth0"
>>> UUID="0079668a-8708-46ad-8dbf-da418ae6f77e"
>>> DEVICE="eth0"
>>> ONBOOT="yes"
>>>
>>> here is after:
>>>
>>> # Generated by VDSM version 4.20.23-1.el7.centos
>>> DEVICE=eth0
>>> BRIDGE=ovirtmgmt
>>> ONBOOT=yes
>>> MTU=1500
>>> DEFROUTE=no
>>> NM_CONTROLLED=no
>>> IPV6INIT=no
>>>
>>> and the bridge:
>>> # Generated by VDSM version 4.20.23-1.el7.centos
>>> DEVICE=ovirtmgmt
>>> TYPE=Bridge
>>> DELAY=0
>>> STP=off
>>> ONBOOT=yes
>>> BOOTPROTO=dhcp
>>> MTU=1500
>>> DEFROUTE=yes
>>> NM_CONTROLLED=no
>>> IPV6INIT=yes
>>> DHCPV6C=yes
>>> IPV6_AUTOCONF=no
>>>
>>> Thanks,
>>> Piotr
>> _______________________________________________
>> Devel mailing list
>> Devel at ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/devel