[ovirt-users] Configuring ilo4 on hp blade gen 9

[Gianluca Cecchi]

On Thu, Oct 5, 2017 at 10:15 AM, Fabrice Bacchella <
fabrice.bacchella at orange.fr> wrote:

> I have HP blades too (ProLiant BL460c Gen9). I have set the fencing to
> ilo4 and everything works fine.
>
> Nothing special on the ilo side, just up to date firmware.
>
>
Also these blades are BL460c Gen9

I'm not the admin of fw of blades, but I can see that the blades have
version 2.53 for firmware and version 1.0.9 for their power mgmt controller.
And the enclosures have fw with version 4.60
Did you create a special user for the iLO fencing of the servers (in my
case fenceuser)? If so, which kind of privileges did you assign to this
user?

I also see that the IPMI settings seem ok:
IPMI/DCMI over LAN Access is enabled
IPMI/DCMI over LAN Port is the default 623 one

but

fence_ilo4 -a ilo_ip -l fenceuser -S /usr/local/bin/my_fence_script.sh -o
status
Failed: Unable to obtain correct plug status or plug is not available

Even if I try -4 and/or -P and/or -L operator and/or -A password
I get the same error
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20171005/4ba26e75/attachment.html>