On Tue, Jul 19, 2016 at 11:27 AM, Tolik Litovsky
<tlitovsk(a)redhat.com>
wrote:
> Is it only for master job ?
> Or we have such repos for all branches ?
>
> On Tue, Jul 19, 2016 at 10:13 AM, Eyal Edri <eedri(a)redhat.com> wrote:
>
>> Ryan/Tolik,
>> Can you build appliance only from tested engine repo [1] ? lets see how
>> it affects the stability, next step will be to publish tested appliance
>> after it runs Lago verification.
>>
>> [1]
>>
http://resources.ovirt.org/repos/ovirt/experimental/master/latest.tested/
>> (published only after ovirt-system-tests basic suite finish successfully)
>>
>>
>> On Tue, Jul 19, 2016 at 10:10 AM, Lev Veyde <lveyde(a)redhat.com> wrote:
>>
>>> Hi Eyal,
>>>
>>> The last failed run failed on:
>>> *15:50:02* [ INFO ] Extracting disk image from OVF archive (could take
>>> a few minutes depending on archive size)
>>> *21:35:04* Build timed out (after 360 minutes). Marking the build as
>>> failed.
>>>
>>> So it basically got stuck while extracting the OVF image.
>>>
>>> Some previous runs failed mostly on either:
>>> a) broken ovirt-engine-appliance build
>>> b) ovirt-engine-appliance missing from the yum repo
>>>
>>> We need to make sure that the process of building and publishing the
>>> ovirt-engine-appliance works flawlessly e.g. build ovirt-engine, publish it
>>> into the repo so that the build of the appliance can work, then publish it
>>> to the repo as well.
>>> This is extra important as the hosted-engine flow installation will
>>> probably become the default one, and without synced ovirt appliance we
>>> can't really test the changes in the engine.
>>>
>>> Thanks in advance,
>>> Lev Veyde.
>>>
>>> ------------------------------
>>> *From: *"Eyal Edri" <eedri(a)redhat.com>
>>> *To: *jenkins(a)jenkins.phx.ovirt.org
>>> *Cc: *"infra" <infra(a)ovirt.org>, "Lev Veyde"
<lveyde(a)redhat.com>,
>>> sbonazzo(a)redhat.com
>>> *Sent: *Tuesday, July 19, 2016 8:26:22 AM
>>> *Subject: *Re: Build failed in Jenkins: ovirt_4.0_he-system-tests #32
>>>
>>>
>>> Lev, this test is a bit flaky going from stable to failure quite
>>> often, can you check what is causing it?
>>> On Jul 19, 2016 12:35 AM, <jenkins(a)jenkins.phx.ovirt.org> wrote:
>>>
>>>> See
<
http://jenkins.ovirt.org/job/ovirt_4.0_he-system-tests/32/changes
>>>> >
>>>>
>>>> Changes:
>>>>
>>>> [Lev Veyde] ovirt-system-tests: Add automation for
>>>> he_iscsi_basic_suite_4.0
>>>>
>>>> [Sandro Bonazzola] vdsm: avoid fc24 out of master
>>>>
>>>> [Sandro Bonazzola] ovirt-engine: add 3.6.8 branch testing
>>>>
>>>> ------------------------------------------
>>>> [...truncated 620 lines...]
>>>>
>>>> WORKSPACE="$PWD"
>>>> OVIRT_SUITE="$SUITE_TYPE_suite_$VERSION"
>>>> TESTS_LOGS="$WORKSPACE/ovirt-system-tests/exported-artifacts"
>>>>
>>>> rm -rf "$WORKSPACE/exported-artifacts"
>>>> mkdir -p "$WORKSPACE/exported-artifacts"
>>>>
>>>> if [[ -d "$TESTS_LOGS" ]]; then
>>>> mv "$TESTS_LOGS/"*
"$WORKSPACE/exported-artifacts/"
>>>> fi
>>>>
>>>> [ovirt_4.0_he-system-tests] $ /bin/bash -xe
>>>> /tmp/hudson1764906258788527221.sh
>>>> + echo shell_scripts/system_tests.collect_logs.sh
>>>> shell_scripts/system_tests.collect_logs.sh
>>>> + VERSION=4.0
>>>> + SUITE_TYPE=
>>>> + WORKSPACE=<
>>>>
http://jenkins.ovirt.org/job/ovirt_4.0_he-system-tests/ws/>
>>>> + OVIRT_SUITE=4.0
>>>> + TESTS_LOGS=<
>>>>
http://jenkins.ovirt.org/job/ovirt_4.0_he-system-tests/ws/ovirt-system-te...
>>>> >
>>>> + rm -rf <
>>>>
http://jenkins.ovirt.org/job/ovirt_4.0_he-system-tests/32/artifact/export...
>>>> >
>>>> + mkdir -p <
>>>>
http://jenkins.ovirt.org/job/ovirt_4.0_he-system-tests/32/artifact/export...
>>>> >
>>>> + [[ -d <
>>>>
http://jenkins.ovirt.org/job/ovirt_4.0_he-system-tests/ws/ovirt-system-te...
>>>> ]]
>>>> POST BUILD TASK : SUCCESS
>>>> END OF POST BUILD TASK : 0
>>>> Match found for :.* : True
>>>> Logical operation result is TRUE
>>>> Running script : #!/bin/bash -xe
>>>> echo "shell-scripts/mock_cleanup.sh"
>>>>
>>>> shopt -s nullglob
>>>>
>>>>
>>>> WORKSPACE="$PWD"
>>>>
>>>> # Make clear this is the cleanup, helps reading the jenkins logs
>>>> cat <<EOC
>>>> _______________________________________________________________________
>>>> #######################################################################
>>>> # #
>>>> # CLEANUP #
>>>> # #
>>>> #######################################################################
>>>> EOC
>>>>
>>>>
>>>> # Archive the logs, we want them anyway
>>>> logs=(
>>>> ./*log
>>>> ./*/logs
>>>> )
>>>> if [[ "$logs" ]]; then
>>>> tar cvzf exported-artifacts/logs.tgz "${logs[@]}"
>>>> rm -rf "${logs[@]}"
>>>> fi
>>>>
>>>> # stop any processes running inside the chroot
>>>> failed=false
>>>> mock_confs=("$WORKSPACE"/*/mocker*)
>>>> # Clean current jobs mockroot if any
>>>> for mock_conf_file in "${mock_confs[@]}"; do
>>>> [[ "$mock_conf_file" ]] || continue
>>>> echo "Cleaning up mock $mock_conf"
>>>> mock_root="${mock_conf_file##*/}"
>>>> mock_root="${mock_root%.*}"
>>>> my_mock="/usr/bin/mock"
>>>> my_mock+=" --configdir=${mock_conf_file%/*}"
>>>> my_mock+=" --root=${mock_root}"
>>>> my_mock+=" --resultdir=$WORKSPACE"
>>>>
>>>> #TODO: investigate why mock --clean fails to umount certain dirs
>>>> sometimes,
>>>> #so we can use it instead of manually doing all this.
>>>> echo "Killing all mock orphan processes, if any."
>>>> $my_mock \
>>>> --orphanskill \
>>>> || {
>>>> echo "ERROR: Failed to kill orphans on $chroot."
>>>> failed=true
>>>> }
>>>>
>>>> mock_root="$(\
>>>> grep \
>>>> -Po "(?<=config_opts\['root'\] =
')[^']*" \
>>>> "$mock_conf_file" \
>>>> )" || :
>>>> [[ "$mock_root" ]] || continue
>>>> mounts=($(mount | awk '{print $3}' | grep
"$mock_root")) || :
>>>> if [[ "$mounts" ]]; then
>>>> echo "Found mounted dirs inside the chroot $chroot. Trying
to
>>>> umount."
>>>> fi
>>>> for mount in "${mounts[@]}"; do
>>>> sudo umount --lazy "$mount" \
>>>> || {
>>>> echo "ERROR: Failed to umount $mount."
>>>> failed=true
>>>> }
>>>> done
>>>> done
>>>>
>>>> # Clean any leftover chroot from other jobs
>>>> for mock_root in /var/lib/mock/*; do
>>>> this_chroot_failed=false
>>>> mounts=($(mount | awk '{print $3}' | grep
"$mock_root")) || :
>>>> if [[ "$mounts" ]]; then
>>>> echo "Found mounted dirs inside the chroot $mock_root."
\
>>>> "Trying to umount."
>>>> fi
>>>> for mount in "${mounts[@]}"; do
>>>> sudo umount --lazy "$mount" \
>>>> || {
>>>> echo "ERROR: Failed to umount $mount."
>>>> failed=true
>>>> this_chroot_failed=true
>>>> }
>>>> done
>>>> if ! $this_chroot_failed; then
>>>> sudo rm -rf "$mock_root"
>>>> fi
>>>> done
>>>>
>>>> if $failed; then
>>>> echo "Aborting."
>>>> exit 1
>>>> fi
>>>>
>>>> # remove mock system cache, we will setup proxies to do the caching
>>>> and this
>>>> # takes lots of space between runs
>>>> shopt -u nullglob
>>>> sudo rm -Rf /var/cache/mock/*
>>>>
>>>> # restore the permissions in the working dir, as sometimes it leaves
>>>> files
>>>> # owned by root and then the 'cleanup workspace' from jenkins
job
>>>> fails to
>>>> # clean and breaks the jobs
>>>> sudo chown -R "$USER" "$WORKSPACE"
>>>>
>>>> [ovirt_4.0_he-system-tests] $ /bin/bash -xe
>>>> /tmp/hudson5198775129414653216.sh
>>>> + echo shell-scripts/mock_cleanup.sh
>>>> shell-scripts/mock_cleanup.sh
>>>> + shopt -s nullglob
>>>> + WORKSPACE=<
>>>>
http://jenkins.ovirt.org/job/ovirt_4.0_he-system-tests/ws/>
>>>> + cat
>>>> _______________________________________________________________________
>>>> #######################################################################
>>>> # #
>>>> # CLEANUP #
>>>> # #
>>>> #######################################################################
>>>> + logs=(./*log ./*/logs)
>>>> + [[ -n ./ovirt-system-tests/logs ]]
>>>> + tar cvzf exported-artifacts/logs.tgz ./ovirt-system-tests/logs
>>>> ./ovirt-system-tests/logs/
>>>> ./ovirt-system-tests/logs/
>>>> mocker-fedora-23-x86_64.fc23.he_basic_suite_4.0.sh/
>>>>
>>>>
./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.he_basic_suite_4.0.sh/he_basic_suite_4.0.sh.log
>>>> ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.clean_rpmdb/
>>>>
>>>>
./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.clean_rpmdb/stdout_stderr.log
>>>>
>>>> ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.install_packages/
>>>>
>>>>
./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.install_packages/root.log
>>>>
>>>>
./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.install_packages/build.log
>>>>
>>>>
./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.install_packages/state.log
>>>>
>>>>
./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.install_packages/stdout_stderr.log
>>>> ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.init/
>>>>
<
http://mocker-fedora-23-x86_64.fc23.he_basic_suite_4.0.sh/./ovirt-system-...
>>>> ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.init/root.log
>>>> ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.init/build.log
>>>> ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.init/state.log
>>>>
>>>>
./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.init/stdout_stderr.log
>>>> + rm -rf ./ovirt-system-tests/logs
>>>> + failed=false
>>>> + mock_confs=("$WORKSPACE"/*/mocker*)
>>>> + for mock_conf_file in '"${mock_confs[@]}"'
>>>> + [[ -n <
>>>>
http://jenkins.ovirt.org/job/ovirt_4.0_he-system-tests/ws/ovirt-system-te...
>>>> ]]
>>>> + echo 'Cleaning up mock '
>>>> Cleaning up mock
>>>> + mock_root=mocker-fedora-23-x86_64.fc23.cfg
>>>> + mock_root=mocker-fedora-23-x86_64.fc23
>>>> + my_mock=/usr/bin/mock
>>>> + my_mock+=' --configdir=<
>>>>
http://jenkins.ovirt.org/job/ovirt_4.0_he-system-tests/ws/ovirt-system-tests
>>>> '>
>>>> + my_mock+=' --root=mocker-fedora-23-x86_64.fc23'
>>>> + my_mock+=' --resultdir=<
>>>>
http://jenkins.ovirt.org/job/ovirt_4.0_he-system-tests/ws/'>
>>>> + echo 'Killing all mock orphan processes, if any.'
>>>> Killing all mock orphan processes, if any.
>>>> + /usr/bin/mock --configdir=<
>>>>
http://jenkins.ovirt.org/job/ovirt_4.0_he-system-tests/ws/ovirt-system-te...
>>>> --root=mocker-fedora-23-x86_64.fc23 --resultdir=<
>>>>
http://jenkins.ovirt.org/job/ovirt_4.0_he-system-tests/ws/>
>>>> --orphanskill
>>>> WARNING: Could not find required logging config file: <
>>>>
http://jenkins.ovirt.org/job/ovirt_4.0_he-system-tests/ws/ovirt-system-te...
>>>> Using default...
>>>> INFO: mock.py version 1.2.17 starting (python version = 3.4.3)...
>>>> Start: init plugins
>>>> INFO: selinux enabled
>>>> Finish: init plugins
>>>> Start: run
>>>> WARNING: Process ID 115551 still running in chroot. Killing...
>>>> WARNING: Process ID 115576 still running in chroot. Killing...
>>>> WARNING: Process ID 115577 still running in chroot. Killing...
>>>> WARNING: Process ID 115578 still running in chroot. Killing...
>>>> WARNING: Process ID 116634 still running in chroot. Killing...
>>>> Finish: run
>>>> ++ grep -Po
'(?<=config_opts\['\''root'\''\] =
'\'')[^'\'']*' <
>>>>
http://jenkins.ovirt.org/job/ovirt_4.0_he-system-tests/ws/ovirt-system-te...
>>>> >
>>>> + mock_root=fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad
>>>> + [[ -n fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad ]]
>>>> + mounts=($(mount | awk '{print $3}' | grep
"$mock_root"))
>>>> ++ mount
>>>> ++ awk '{print $3}'
>>>> ++ grep fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad
>>>> + [[ -n
>>>>
/var/lib/mock/fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad-91644/root/proc
>>>> ]]
>>>> + echo 'Found mounted dirs inside the chroot . Trying to
umount.'
>>>> Found mounted dirs inside the chroot . Trying to umount.
>>>> + for mount in '"${mounts[@]}"'
>>>> + sudo umount --lazy
>>>>
/var/lib/mock/fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad-91644/root/proc
>>>> + for mount in '"${mounts[@]}"'
>>>> + sudo umount --lazy
>>>>
/var/lib/mock/fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad-91644/root/sys
>>>> sh: [115551: 1 (255)] tcsetattr: Inappropriate ioctl for device
>>>> + for mount in '"${mounts[@]}"'
>>>> + sudo umount --lazy
>>>>
/var/lib/mock/fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad-91644/root/dev/shm
>>>> + for mount in '"${mounts[@]}"'
>>>> + sudo umount --lazy
>>>>
/var/lib/mock/fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad-91644/root/dev/pts
>>>> + for mount in '"${mounts[@]}"'
>>>> + sudo umount --lazy
>>>>
/var/lib/mock/fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad-91644/root/var/cache/yum
>>>> + for mount in '"${mounts[@]}"'
>>>> + sudo umount --lazy
>>>>
/var/lib/mock/fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad-91644/root<
>>>>
http://jenkins.ovirt.org/job/ovirt_4.0_he-system-tests/ws/ovirt-system-tests
>>>> >
>>>> + for mount in '"${mounts[@]}"'
>>>> + sudo umount --lazy
>>>>
/var/lib/mock/fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad-91644/root/run/libvirt
>>>> + for mount in '"${mounts[@]}"'
>>>> + sudo umount --lazy
>>>>
/var/lib/mock/fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad-91644/root/var/lib/lago
>>>> umount:
>>>>
/var/lib/mock/fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad-91644/root/var/lib/lago:
>>>> not mounted
>>>> + echo 'ERROR: Failed to umount
>>>>
/var/lib/mock/fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad-91644/root/var/lib/lago.'
>>>> ERROR: Failed to umount
>>>>
/var/lib/mock/fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad-91644/root/var/lib/lago.
>>>> + failed=true
>>>> + for mount in '"${mounts[@]}"'
>>>> + sudo umount --lazy
>>>>
/var/lib/mock/fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad-91644/root/proc/filesystems
>>>> umount:
>>>>
/var/lib/mock/fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad-91644/root/proc/filesystems:
>>>> mountpoint not found
>>>> + echo 'ERROR: Failed to umount
>>>>
/var/lib/mock/fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad-91644/root/proc/filesystems.'
>>>> ERROR: Failed to umount
>>>>
/var/lib/mock/fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad-91644/root/proc/filesystems.
>>>> + failed=true
>>>> + for mock_root in '/var/lib/mock/*'
>>>> + this_chroot_failed=false
>>>> + mounts=($(mount | awk '{print $3}' | grep
"$mock_root"))
>>>> ++ mount
>>>> ++ awk '{print $3}'
>>>> ++ grep
>>>> /var/lib/mock/fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad-91644
>>>> + :
>>>> + [[ -n '' ]]
>>>> + false
>>>> + sudo rm -rf
>>>> /var/lib/mock/fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad-91644
>>>> + true
>>>> + echo Aborting.
>>>> Aborting.
>>>> + exit 1
>>>> POST BUILD TASK : FAILURE
>>>> END OF POST BUILD TASK : 1
>>>> Recording test results
>>>> ERROR: Step ‘Publish JUnit test result report’ failed: No test report
>>>> files were found. Configuration error?
>>>> Archiving artifacts
>>>> _______________________________________________
>>>> Infra mailing list
>>>> Infra(a)ovirt.org
>>>>
http://lists.ovirt.org/mailman/listinfo/infra
>>>>
>>>>
>>>>
>>>
>>
>>
>> --
>> Eyal Edri
>> Associate Manager
>> RHEV DevOps
>> EMEA ENG Virtualization R&D
>> Red Hat Israel
>>
>> phone: +972-9-7692018
>> irc: eedri (on #tlv #rhev-dev #rhev-integ)
>>
>
>
>
> --
> Best regards
> Tolik Litovsky
> RHEV-H Team
> Red Hat
>
> Red Hat: trustworthy, transformative technology. Powered by the community.
> Connect at
redhat.com
>
--
Eyal Edri
Associate Manager
RHEV DevOps
EMEA ENG Virtualization R&D
Red Hat Israel
phone: +972-9-7692018
irc: eedri (on #tlv #rhev-dev #rhev-integ)
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at