May I apply for a user account on jenkins.ovirt.org to run VDSM functional tests?
Hi all, I notice there is no VDSM functional tests running in oVirt Jenkins. Currently in VDSM we have some XML-RPC functional test cases for iSCSI, localfs and glusterfs storage as well as creating and destroying VMs on those storage. Functional tests through JSON-RPC are under review. I also submit a patch to Gerrit for running the tests easily (http://gerrit.ovirt.org/#/c/11238/). More test cases will be added to improve test coverage and reduce the chance of regression. Some bugs that can not be covered by unit test can be caught by functional tests. I think it would be helpful to run these functional tests continuously. We can also configure the Gerrit trigger in Jenkins to run functional tests when someone verifies the patch or when it gets approved but not merged. This may be helpful to the maintainer. I've setup a Jenkins job for VDSM functional tests in my lab server. You can refer to the job configuration of my current setup (https://github.com/edwardbadboy/vdsm-jenkins/blob/master/config.xml). After my patch in Gerrit is accepted, the job configuration will be simpler and the hacks can be removed. May I apply a user account for creating job in the oVirt Jenkins? -- Thanks and best regards! Zhou Zheng Sheng / 周征晟 E-mail: zhshzhou@linux.vnet.ibm.com Telephone: 86-10-82454397
----- Original Message -----
From: "Zhou Zheng Sheng" <zhshzhou@linux.vnet.ibm.com> To: infra@ovirt.org Cc: "ShaoHe Feng" <shaohef@linux.vnet.ibm.com> Sent: Tuesday, January 29, 2013 12:24:27 PM Subject: May I apply for a user account on jenkins.ovirt.org to run VDSM functional tests?
Hi all,
I notice there is no VDSM functional tests running in oVirt Jenkins. Currently in VDSM we have some XML-RPC functional test cases for iSCSI, localfs and glusterfs storage as well as creating and destroying VMs on those storage. Functional tests through JSON-RPC are under review. I also submit a patch to Gerrit for running the tests easily (http://gerrit.ovirt.org/#/c/11238/). More test cases will be added to improve test coverage and reduce the chance of regression.
Some bugs that can not be covered by unit test can be caught by functional tests. I think it would be helpful to run these functional tests continuously. We can also configure the Gerrit trigger in Jenkins to run functional tests when someone verifies the patch or when it gets approved but not merged. This may be helpful to the maintainer.
I've setup a Jenkins job for VDSM functional tests in my lab server. You can refer to the job configuration of my current setup (https://github.com/edwardbadboy/vdsm-jenkins/blob/master/config.xml). After my patch in Gerrit is accepted, the job configuration will be simpler and the hacks can be removed. May I apply a user account for creating job in the oVirt Jenkins?
Hi Zhou, Basically there shouldn't be any problem with that. we have an option for giving a 'power-user' permissions for certain users on oVirt misc projects to add and and configure jobs for thier project. it requires knowledge in jenkins, which it seems that you have and recognition from the team/other developers from the relevant project (in this case, VDSM) that you are an active member of the project. (just a formality essentially) I've added engine-devel list to this thread so anyone from vdsm team can vote +1 for adding you as a power user for jenkins. once we'll receive a few +1 and not objections i'll create a user for you and send you the details. you'll be able to: 1. create new jobs 2. update jobs configurations 3. run jobs..
-- Thanks and best regards!
Zhou Zheng Sheng / 周征晟 E-mail: zhshzhou@linux.vnet.ibm.com Telephone: 86-10-82454397
_______________________________________________ Infra mailing list Infra@ovirt.org http://lists.ovirt.org/mailman/listinfo/infra
On Tue, Jan 29, 2013 at 06:15:08AM -0500, Eyal Edri wrote:
----- Original Message -----
From: "Zhou Zheng Sheng" <zhshzhou@linux.vnet.ibm.com> To: infra@ovirt.org Cc: "ShaoHe Feng" <shaohef@linux.vnet.ibm.com> Sent: Tuesday, January 29, 2013 12:24:27 PM Subject: May I apply for a user account on jenkins.ovirt.org to run VDSM functional tests?
Hi all,
I notice there is no VDSM functional tests running in oVirt Jenkins. Currently in VDSM we have some XML-RPC functional test cases for iSCSI, localfs and glusterfs storage as well as creating and destroying VMs on those storage. Functional tests through JSON-RPC are under review. I also submit a patch to Gerrit for running the tests easily (http://gerrit.ovirt.org/#/c/11238/). More test cases will be added to improve test coverage and reduce the chance of regression.
Some bugs that can not be covered by unit test can be caught by functional tests. I think it would be helpful to run these functional tests continuously. We can also configure the Gerrit trigger in Jenkins to run functional tests when someone verifies the patch or when it gets approved but not merged. This may be helpful to the maintainer.
I've setup a Jenkins job for VDSM functional tests in my lab server. You can refer to the job configuration of my current setup (https://github.com/edwardbadboy/vdsm-jenkins/blob/master/config.xml). After my patch in Gerrit is accepted, the job configuration will be simpler and the hacks can be removed. May I apply a user account for creating job in the oVirt Jenkins?
Hi Zhou, Basically there shouldn't be any problem with that. we have an option for giving a 'power-user' permissions for certain users on oVirt misc projects to add and and configure jobs for thier project.
it requires knowledge in jenkins, which it seems that you have and recognition from the team/other developers from the relevant project (in this case, VDSM) that you are an active member of the project. (just a formality essentially)
I've added engine-devel list to this thread so anyone from vdsm team can vote +1 for adding you as a power user for jenkins.
once we'll receive a few +1 and not objections i'll create a user for you and send you the details.
I think vdsm-devel is more relevant here.
On Tue, Jan 29, 2013 at 12:21:46PM +0100, Ewoud Kohl van Wijngaarden wrote:
On Tue, Jan 29, 2013 at 06:15:08AM -0500, Eyal Edri wrote:
----- Original Message -----
From: "Zhou Zheng Sheng" <zhshzhou@linux.vnet.ibm.com> To: infra@ovirt.org Cc: "ShaoHe Feng" <shaohef@linux.vnet.ibm.com> Sent: Tuesday, January 29, 2013 12:24:27 PM Subject: May I apply for a user account on jenkins.ovirt.org to run VDSM functional tests?
Hi all,
I notice there is no VDSM functional tests running in oVirt Jenkins. Currently in VDSM we have some XML-RPC functional test cases for iSCSI, localfs and glusterfs storage as well as creating and destroying VMs on those storage. Functional tests through JSON-RPC are under review. I also submit a patch to Gerrit for running the tests easily (http://gerrit.ovirt.org/#/c/11238/). More test cases will be added to improve test coverage and reduce the chance of regression.
Some bugs that can not be covered by unit test can be caught by functional tests. I think it would be helpful to run these functional tests continuously. We can also configure the Gerrit trigger in Jenkins to run functional tests when someone verifies the patch or when it gets approved but not merged. This may be helpful to the maintainer.
I've setup a Jenkins job for VDSM functional tests in my lab server. You can refer to the job configuration of my current setup (https://github.com/edwardbadboy/vdsm-jenkins/blob/master/config.xml). After my patch in Gerrit is accepted, the job configuration will be simpler and the hacks can be removed. May I apply a user account for creating job in the oVirt Jenkins?
Hi Zhou, Basically there shouldn't be any problem with that. we have an option for giving a 'power-user' permissions for certain users on oVirt misc projects to add and and configure jobs for thier project.
it requires knowledge in jenkins, which it seems that you have and recognition from the team/other developers from the relevant project (in this case, VDSM) that you are an active member of the project. (just a formality essentially)
I've added engine-devel list to this thread so anyone from vdsm team can vote +1 for adding you as a power user for jenkins.
once we'll receive a few +1 and not objections i'll create a user for you and send you the details.
I think vdsm-devel is more relevant here.
Zhou has a lot of credibility in vdsm-devel, but we have a watchful eye here as well. Yes, I'd be proud to endorse Zhou as a Jenkins power user. I would only like to warn that we must make sure that no more than one functional test is being run per slave - vdsm process are quite primadonic. Is there a Jenkins mechanism to ensure that only one job (of a certain job class) is running on a specific host? All and all, big +1.
----- Original Message -----
From: "Dan Kenigsberg" <danken@redhat.com> To: "Eyal Edri" <eedri@redhat.com>, "Zhou Zheng Sheng" <zhshzhou@linux.vnet.ibm.com>, vdsm-devel@lists.fedorahosted.org, infra@ovirt.org Sent: Tuesday, January 29, 2013 2:07:58 PM Subject: Re: May I apply for a user account on jenkins.ovirt.org to run VDSM functional tests?
On Tue, Jan 29, 2013 at 12:21:46PM +0100, Ewoud Kohl van Wijngaarden wrote:
On Tue, Jan 29, 2013 at 06:15:08AM -0500, Eyal Edri wrote:
----- Original Message -----
From: "Zhou Zheng Sheng" <zhshzhou@linux.vnet.ibm.com> To: infra@ovirt.org Cc: "ShaoHe Feng" <shaohef@linux.vnet.ibm.com> Sent: Tuesday, January 29, 2013 12:24:27 PM Subject: May I apply for a user account on jenkins.ovirt.org to run VDSM functional tests?
Hi all,
I notice there is no VDSM functional tests running in oVirt Jenkins. Currently in VDSM we have some XML-RPC functional test cases for iSCSI, localfs and glusterfs storage as well as creating and destroying VMs on those storage. Functional tests through JSON-RPC are under review. I also submit a patch to Gerrit for running the tests easily (http://gerrit.ovirt.org/#/c/11238/). More test cases will be added to improve test coverage and reduce the chance of regression.
Some bugs that can not be covered by unit test can be caught by functional tests. I think it would be helpful to run these functional tests continuously. We can also configure the Gerrit trigger in Jenkins to run functional tests when someone verifies the patch or when it gets approved but not merged. This may be helpful to the maintainer.
I've setup a Jenkins job for VDSM functional tests in my lab server. You can refer to the job configuration of my current setup (https://github.com/edwardbadboy/vdsm-jenkins/blob/master/config.xml). After my patch in Gerrit is accepted, the job configuration will be simpler and the hacks can be removed. May I apply a user account for creating job in the oVirt Jenkins?
Hi Zhou, Basically there shouldn't be any problem with that. we have an option for giving a 'power-user' permissions for certain users on oVirt misc projects to add and and configure jobs for thier project.
it requires knowledge in jenkins, which it seems that you have and recognition from the team/other developers from the relevant project (in this case, VDSM) that you are an active member of the project. (just a formality essentially)
I've added engine-devel list to this thread so anyone from vdsm team can vote +1 for adding you as a power user for jenkins.
once we'll receive a few +1 and not objections i'll create a user for you and send you the details.
I think vdsm-devel is more relevant here.
Zhou has a lot of credibility in vdsm-devel, but we have a watchful eye here as well.
Yes, I'd be proud to endorse Zhou as a Jenkins power user. I would only like to warn that we must make sure that no more than one functional test is being run per slave - vdsm process are quite primadonic. Is there a Jenkins mechanism to ensure that only one job (of a certain job class) is running on a specific host?
yes there is, it's a default behavior, and if you enable concurrent jobs, you need to make sure to allow only 1 job per node.
All and all, big +1.
On Tue, Jan 29, 2013 at 12:21:46PM +0100, Ewoud Kohl van Wijngaarden wrote:
On Tue, Jan 29, 2013 at 06:15:08AM -0500, Eyal Edri wrote:
----- Original Message -----
From: "Zhou Zheng Sheng" <zhshzhou@linux.vnet.ibm.com> To: infra@ovirt.org Cc: "ShaoHe Feng" <shaohef@linux.vnet.ibm.com> Sent: Tuesday, January 29, 2013 12:24:27 PM Subject: May I apply for a user account on jenkins.ovirt.org to run VDSM functional tests?
Hi all,
I notice there is no VDSM functional tests running in oVirt Jenkins. Currently in VDSM we have some XML-RPC functional test cases for iSCSI, localfs and glusterfs storage as well as creating and destroying VMs on those storage. Functional tests through JSON-RPC are under review. I also submit a patch to Gerrit for running the tests easily (http://gerrit.ovirt.org/#/c/11238/). More test cases will be added to improve test coverage and reduce the chance of regression.
Some bugs that can not be covered by unit test can be caught by functional tests. I think it would be helpful to run these functional tests continuously. We can also configure the Gerrit trigger in Jenkins to run functional tests when someone verifies the patch or when it gets approved but not merged. This may be helpful to the maintainer.
I've setup a Jenkins job for VDSM functional tests in my lab server. You can refer to the job configuration of my current setup (https://github.com/edwardbadboy/vdsm-jenkins/blob/master/config.xml). After my patch in Gerrit is accepted, the job configuration will be simpler and the hacks can be removed. May I apply a user account for creating job in the oVirt Jenkins?
Hi Zhou, Basically there shouldn't be any problem with that. we have an option for giving a 'power-user' permissions for certain users on oVirt misc projects to add and and configure jobs for thier project.
it requires knowledge in jenkins, which it seems that you have and recognition from the team/other developers from the relevant project (in this case, VDSM) that you are an active member of the project. (just a formality essentially)
I've added engine-devel list to this thread so anyone from vdsm team can vote +1 for adding you as a power user for jenkins.
once we'll receive a few +1 and not objections i'll create a user for you and send you the details.
I think vdsm-devel is more relevant here.
Also a big +1 from me. -- Adam Litke <agl@us.ibm.com> IBM Linux Technology Center
----- Original Message -----
From: "Adam Litke" <agl@us.ibm.com> To: "Eyal Edri" <eedri@redhat.com>, "Zhou Zheng Sheng" <zhshzhou@linux.vnet.ibm.com>, vdsm-devel@lists.fedorahosted.org, infra@ovirt.org Sent: Wednesday, January 30, 2013 4:09:54 PM Subject: Re: [vdsm] May I apply for a user account on jenkins.ovirt.org to run VDSM functional tests?
On Tue, Jan 29, 2013 at 12:21:46PM +0100, Ewoud Kohl van Wijngaarden wrote:
On Tue, Jan 29, 2013 at 06:15:08AM -0500, Eyal Edri wrote:
----- Original Message -----
From: "Zhou Zheng Sheng" <zhshzhou@linux.vnet.ibm.com> To: infra@ovirt.org Cc: "ShaoHe Feng" <shaohef@linux.vnet.ibm.com> Sent: Tuesday, January 29, 2013 12:24:27 PM Subject: May I apply for a user account on jenkins.ovirt.org to run VDSM functional tests?
Hi all,
I notice there is no VDSM functional tests running in oVirt Jenkins. Currently in VDSM we have some XML-RPC functional test cases for iSCSI, localfs and glusterfs storage as well as creating and destroying VMs on those storage. Functional tests through JSON-RPC are under review. I also submit a patch to Gerrit for running the tests easily (http://gerrit.ovirt.org/#/c/11238/). More test cases will be added to improve test coverage and reduce the chance of regression.
Some bugs that can not be covered by unit test can be caught by functional tests. I think it would be helpful to run these functional tests continuously. We can also configure the Gerrit trigger in Jenkins to run functional tests when someone verifies the patch or when it gets approved but not merged. This may be helpful to the maintainer.
I've setup a Jenkins job for VDSM functional tests in my lab server. You can refer to the job configuration of my current setup (https://github.com/edwardbadboy/vdsm-jenkins/blob/master/config.xml). After my patch in Gerrit is accepted, the job configuration will be simpler and the hacks can be removed. May I apply a user account for creating job in the oVirt Jenkins?
Hi Zhou, Basically there shouldn't be any problem with that. we have an option for giving a 'power-user' permissions for certain users on oVirt misc projects to add and and configure jobs for thier project.
it requires knowledge in jenkins, which it seems that you have and recognition from the team/other developers from the relevant project (in this case, VDSM) that you are an active member of the project. (just a formality essentially)
I've added engine-devel list to this thread so anyone from vdsm team can vote +1 for adding you as a power user for jenkins.
once we'll receive a few +1 and not objections i'll create a user for you and send you the details.
I think vdsm-devel is more relevant here.
Also a big +1 from me.
Ok, i think it's enough +1's and general approval from the community. Zhou, please send me in a private email your desired user & email and i'll set up an account for you. Eyal.
-- Adam Litke <agl@us.ibm.com> IBM Linux Technology Center
Zhshzhou, It sounds very helpful and we must use functional tests already as you mentioned. Please inform vdsm-devel how to run those tests manually and how we can distinguish errors with that. XML-RPC functional test cases are still in progress and there's a lot to add there, it might be useful to add wiki about those tests, what is covered and what we want to add ----- Original Message ----- From: "Eyal Edri" <eedri@redhat.com> To: "Zhou Zheng Sheng" <zhshzhou@linux.vnet.ibm.com> Cc: vdsm-devel@lists.fedorahosted.org, infra@ovirt.org Sent: Wednesday, January 30, 2013 7:47:06 PM Subject: Re: [vdsm] May I apply for a user account on jenkins.ovirt.org to run VDSM functional tests? ----- Original Message -----
From: "Adam Litke" <agl@us.ibm.com> To: "Eyal Edri" <eedri@redhat.com>, "Zhou Zheng Sheng" <zhshzhou@linux.vnet.ibm.com>, vdsm-devel@lists.fedorahosted.org, infra@ovirt.org Sent: Wednesday, January 30, 2013 4:09:54 PM Subject: Re: [vdsm] May I apply for a user account on jenkins.ovirt.org to run VDSM functional tests?
On Tue, Jan 29, 2013 at 12:21:46PM +0100, Ewoud Kohl van Wijngaarden wrote:
On Tue, Jan 29, 2013 at 06:15:08AM -0500, Eyal Edri wrote:
----- Original Message -----
From: "Zhou Zheng Sheng" <zhshzhou@linux.vnet.ibm.com> To: infra@ovirt.org Cc: "ShaoHe Feng" <shaohef@linux.vnet.ibm.com> Sent: Tuesday, January 29, 2013 12:24:27 PM Subject: May I apply for a user account on jenkins.ovirt.org to run VDSM functional tests?
Hi all,
I notice there is no VDSM functional tests running in oVirt Jenkins. Currently in VDSM we have some XML-RPC functional test cases for iSCSI, localfs and glusterfs storage as well as creating and destroying VMs on those storage. Functional tests through JSON-RPC are under review. I also submit a patch to Gerrit for running the tests easily (http://gerrit.ovirt.org/#/c/11238/). More test cases will be added to improve test coverage and reduce the chance of regression.
Some bugs that can not be covered by unit test can be caught by functional tests. I think it would be helpful to run these functional tests continuously. We can also configure the Gerrit trigger in Jenkins to run functional tests when someone verifies the patch or when it gets approved but not merged. This may be helpful to the maintainer.
I've setup a Jenkins job for VDSM functional tests in my lab server. You can refer to the job configuration of my current setup (https://github.com/edwardbadboy/vdsm-jenkins/blob/master/config.xml). After my patch in Gerrit is accepted, the job configuration will be simpler and the hacks can be removed. May I apply a user account for creating job in the oVirt Jenkins?
Hi Zhou, Basically there shouldn't be any problem with that. we have an option for giving a 'power-user' permissions for certain users on oVirt misc projects to add and and configure jobs for thier project.
it requires knowledge in jenkins, which it seems that you have and recognition from the team/other developers from the relevant project (in this case, VDSM) that you are an active member of the project. (just a formality essentially)
I've added engine-devel list to this thread so anyone from vdsm team can vote +1 for adding you as a power user for jenkins.
once we'll receive a few +1 and not objections i'll create a user for you and send you the details.
I think vdsm-devel is more relevant here.
Also a big +1 from me.
Ok, i think it's enough +1's and general approval from the community. Zhou, please send me in a private email your desired user & email and i'll set up an account for you. Eyal.
-- Adam Litke <agl@us.ibm.com> IBM Linux Technology Center
_______________________________________________ vdsm-devel mailing list vdsm-devel@lists.fedorahosted.org https://lists.fedorahosted.org/mailman/listinfo/vdsm-devel
participants (6)
-
Adam Litke -
Dan Kenigsberg -
Ewoud Kohl van Wijngaarden -
Eyal Edri -
Yaniv Bronheim -
Zhou Zheng Sheng