6:47 a.m.
Hello,
Reminder: I am re-writing the vdsm-bootstrap. It is split out to own packages
ovirt-host-deploy, and otopi.
otopi is common installation framework that may be used by other components as well.
otopi build job is available at[1].
In order to build ovirt-host-deploy rpms in jenkins I need otopi-devel, otopi-java, otopi
to be installed at slaves machines.
These can be acquired from [2].
What is the procedure for this?
Best Regards,
Alon Bar-Lev.
[1] http://jenkins.ovirt.org/job/otopi_create_rpms/
[2] http://jenkins.ovirt.org/job/otopi_create_rpms/lastSuccessfulBuild/artifact/
6:55 a.m.
----- Original Message -----
From: "Alon Bar-Lev" <alonbl(a)redhat.com>
To: infra(a)ovirt.org
Cc: "Eyal Edri" <eedri(a)redhat.com>
Sent: Monday, November 26, 2012 2:47:16 PM
Subject: [jenkins] Add otp rpms to build slaves
Hello,
Reminder: I am re-writing the vdsm-bootstrap. It is split out to own
packages ovirt-host-deploy, and otopi.
otopi is common installation framework that may be used by other
components as well.
otopi build job is available at[1].
In order to build ovirt-host-deploy rpms in jenkins I need
otopi-devel, otopi-java, otopi to be installed at slaves machines.
These can be acquired from [2].
What is the procedure for this?
Long term: this will involve creating a relevant puppet classes and applying it to the
jenkins slaves
with foreman and puppet master.
Short term: manual adding these repos to the jenkins slaves, then you can install them via
the system job in jenkins.
(unless there is an objection on the team, for having custom builds repo on jenkins
slaves.. thoughts?)
if not, you can open a ticket for it in https://fedorahosted.org/ovirt/report/1.
Best Regards,
Alon Bar-Lev.
[1] http://jenkins.ovirt.org/job/otopi_create_rpms/
[2]
http://jenkins.ovirt.org/job/otopi_create_rpms/lastSuccessfulBuild/artifact/
7 a.m.
----- Original Message -----
From: "Eyal Edri" <eedri(a)redhat.com>
To: "Alon Bar-Lev" <alonbl(a)redhat.com>
Cc: infra(a)ovirt.org
Sent: Monday, November 26, 2012 2:55:26 PM
Subject: Re: [jenkins] Add otp rpms to build slaves
----- Original Message -----
> From: "Alon Bar-Lev" <alonbl(a)redhat.com>
> To: infra(a)ovirt.org
> Cc: "Eyal Edri" <eedri(a)redhat.com>
> Sent: Monday, November 26, 2012 2:47:16 PM
> Subject: [jenkins] Add otp rpms to build slaves
>
> Hello,
>
> Reminder: I am re-writing the vdsm-bootstrap. It is split out to
> own
> packages ovirt-host-deploy, and otopi.
> otopi is common installation framework that may be used by other
> components as well.
>
> otopi build job is available at[1].
>
> In order to build ovirt-host-deploy rpms in jenkins I need
> otopi-devel, otopi-java, otopi to be installed at slaves machines.
>
> These can be acquired from [2].
>
> What is the procedure for this?
Long term: this will involve creating a relevant puppet classes and
applying it to the jenkins slaves
with foreman and puppet master.
Looking for short term for now...
Short term: manual adding these repos to the jenkins slaves, then
you
can install them via the system job in jenkins.
(unless there is an objection on the team, for having custom builds
repo on jenkins slaves.. thoughts?)
What have we done with a package such as vdsm-bootstrap?
Is it installed? from which repository?
Or ovirt-iso-uploader that is dependency of ovirt-engine?
I can publish otopi at same repository...
if not, you can open a ticket for it in
https://fedorahosted.org/ovirt/report/1.
If not what? not objection? I will wait.
Thanks!
Alon
7:04 a.m.
----- Original Message -----
From: "Alon Bar-Lev" <alonbl(a)redhat.com>
To: "Eyal Edri" <eedri(a)redhat.com>
Cc: infra(a)ovirt.org
Sent: Monday, November 26, 2012 3:00:01 PM
Subject: Re: [jenkins] Add otp rpms to build slaves
----- Original Message -----
> From: "Eyal Edri" <eedri(a)redhat.com>
> To: "Alon Bar-Lev" <alonbl(a)redhat.com>
> Cc: infra(a)ovirt.org
> Sent: Monday, November 26, 2012 2:55:26 PM
> Subject: Re: [jenkins] Add otp rpms to build slaves
>
>
>
> ----- Original Message -----
> > From: "Alon Bar-Lev" <alonbl(a)redhat.com>
> > To: infra(a)ovirt.org
> > Cc: "Eyal Edri" <eedri(a)redhat.com>
> > Sent: Monday, November 26, 2012 2:47:16 PM
> > Subject: [jenkins] Add otp rpms to build slaves
> >
> > Hello,
> >
> > Reminder: I am re-writing the vdsm-bootstrap. It is split out to
> > own
> > packages ovirt-host-deploy, and otopi.
> > otopi is common installation framework that may be used by other
> > components as well.
> >
> > otopi build job is available at[1].
> >
> > In order to build ovirt-host-deploy rpms in jenkins I need
> > otopi-devel, otopi-java, otopi to be installed at slaves
> > machines.
> >
> > These can be acquired from [2].
> >
> > What is the procedure for this?
>
> Long term: this will involve creating a relevant puppet classes and
> applying it to the jenkins slaves
> with foreman and puppet master.
Looking for short term for now...
> Short term: manual adding these repos to the jenkins slaves, then
> you
> can install them via the system job in jenkins.
> (unless there is an objection on the team, for having custom builds
> repo on jenkins slaves.. thoughts?)
What have we done with a package such as vdsm-bootstrap?
Is it installed? from which repository?
it's not, we're not running a bootstrap tests yet, it reuquires a real host (or
nested)
which we don't have yet.
Or ovirt-iso-uploader that is dependency of ovirt-engine?
I can publish otopi at same repository...
we're not installing ovirt-engine yet as well..
> if not, you can open a ticket for it in
> https://fedorahosted.org/ovirt/report/1.
If not what? not objection? I will wait.
yes, let's wait to hear other team members opinion on this.
Thanks!
Alon
7:11 a.m.
----- Original Message -----
From: "Eyal Edri" <eedri(a)redhat.com>
To: "Alon Bar-Lev" <alonbl(a)redhat.com>
Cc: infra(a)ovirt.org
Sent: Monday, November 26, 2012 3:04:30 PM
Subject: Re: [jenkins] Add otp rpms to build slaves
----- Original Message -----
> From: "Alon Bar-Lev" <alonbl(a)redhat.com>
> To: "Eyal Edri" <eedri(a)redhat.com>
> Cc: infra(a)ovirt.org
> Sent: Monday, November 26, 2012 3:00:01 PM
> Subject: Re: [jenkins] Add otp rpms to build slaves
>
>
>
> ----- Original Message -----
> > From: "Eyal Edri" <eedri(a)redhat.com>
> > To: "Alon Bar-Lev" <alonbl(a)redhat.com>
> > Cc: infra(a)ovirt.org
> > Sent: Monday, November 26, 2012 2:55:26 PM
> > Subject: Re: [jenkins] Add otp rpms to build slaves
> >
> >
> >
> > ----- Original Message -----
> > > From: "Alon Bar-Lev" <alonbl(a)redhat.com>
> > > To: infra(a)ovirt.org
> > > Cc: "Eyal Edri" <eedri(a)redhat.com>
> > > Sent: Monday, November 26, 2012 2:47:16 PM
> > > Subject: [jenkins] Add otp rpms to build slaves
> > >
> > > Hello,
> > >
> > > Reminder: I am re-writing the vdsm-bootstrap. It is split out
> > > to
> > > own
> > > packages ovirt-host-deploy, and otopi.
> > > otopi is common installation framework that may be used by
> > > other
> > > components as well.
> > >
> > > otopi build job is available at[1].
> > >
> > > In order to build ovirt-host-deploy rpms in jenkins I need
> > > otopi-devel, otopi-java, otopi to be installed at slaves
> > > machines.
> > >
> > > These can be acquired from [2].
> > >
> > > What is the procedure for this?
> >
> > Long term: this will involve creating a relevant puppet classes
> > and
> > applying it to the jenkins slaves
> > with foreman and puppet master.
>
> Looking for short term for now...
>
> > Short term: manual adding these repos to the jenkins slaves, then
> > you
> > can install them via the system job in jenkins.
> > (unless there is an objection on the team, for having custom
> > builds
> > repo on jenkins slaves.. thoughts?)
>
> What have we done with a package such as vdsm-bootstrap?
> Is it installed? from which repository?
it's not, we're not running a bootstrap tests yet, it reuquires a
real host (or nested)
which we don't have yet.
Oh!!! we had no such BuildRequires of any of our components.
This is going to change as ovirt-engine will require ovirt-host-deploy-java to build.
> Or ovirt-iso-uploader that is dependency of ovirt-engine?
> I can publish otopi at same repository...
we're not installing ovirt-engine yet as well..
Right... this is OK, I am talking about the dependencies.
>
> > if not, you can open a ticket for it in
> > https://fedorahosted.org/ovirt/report/1.
>
> If not what? not objection? I will wait.
yes, let's wait to hear other team members opinion on this.
>
> Thanks!
> Alon
>
1:27 p.m.
----- Original Message -----
From: "Alon Bar-Lev" <alonbl(a)redhat.com>
To: "Eyal Edri" <eedri(a)redhat.com>
Cc: infra(a)ovirt.org
Sent: Monday, November 26, 2012 3:11:14 PM
Subject: Re: [jenkins] Add otp rpms to build slaves
----- Original Message -----
> From: "Eyal Edri" <eedri(a)redhat.com>
> To: "Alon Bar-Lev" <alonbl(a)redhat.com>
> Cc: infra(a)ovirt.org
> Sent: Monday, November 26, 2012 3:04:30 PM
> Subject: Re: [jenkins] Add otp rpms to build slaves
>
>
>
> ----- Original Message -----
> > From: "Alon Bar-Lev" <alonbl(a)redhat.com>
> > To: "Eyal Edri" <eedri(a)redhat.com>
> > Cc: infra(a)ovirt.org
> > Sent: Monday, November 26, 2012 3:00:01 PM
> > Subject: Re: [jenkins] Add otp rpms to build slaves
> >
> >
> >
> > ----- Original Message -----
> > > From: "Eyal Edri" <eedri(a)redhat.com>
> > > To: "Alon Bar-Lev" <alonbl(a)redhat.com>
> > > Cc: infra(a)ovirt.org
> > > Sent: Monday, November 26, 2012 2:55:26 PM
> > > Subject: Re: [jenkins] Add otp rpms to build slaves
> > >
> > >
> > >
> > > ----- Original Message -----
> > > > From: "Alon Bar-Lev" <alonbl(a)redhat.com>
> > > > To: infra(a)ovirt.org
> > > > Cc: "Eyal Edri" <eedri(a)redhat.com>
> > > > Sent: Monday, November 26, 2012 2:47:16 PM
> > > > Subject: [jenkins] Add otp rpms to build slaves
> > > >
> > > > Hello,
> > > >
> > > > Reminder: I am re-writing the vdsm-bootstrap. It is split out
> > > > to
> > > > own
> > > > packages ovirt-host-deploy, and otopi.
> > > > otopi is common installation framework that may be used by
> > > > other
> > > > components as well.
> > > >
> > > > otopi build job is available at[1].
> > > >
> > > > In order to build ovirt-host-deploy rpms in jenkins I need
> > > > otopi-devel, otopi-java, otopi to be installed at slaves
> > > > machines.
> > > >
> > > > These can be acquired from [2].
> > > >
> > > > What is the procedure for this?
> > >
> > > Long term: this will involve creating a relevant puppet classes
> > > and
> > > applying it to the jenkins slaves
> > > with foreman and puppet master.
> >
> > Looking for short term for now...
> >
> > > Short term: manual adding these repos to the jenkins slaves,
> > > then
> > > you
> > > can install them via the system job in jenkins.
> > > (unless there is an objection on the team, for having custom
> > > builds
> > > repo on jenkins slaves.. thoughts?)
> >
> > What have we done with a package such as vdsm-bootstrap?
> > Is it installed? from which repository?
>
> it's not, we're not running a bootstrap tests yet, it reuquires a
> real host (or nested)
> which we don't have yet.
Oh!!! we had no such BuildRequires of any of our components.
This is going to change as ovirt-engine will require
ovirt-host-deploy-java to build.
>
> > Or ovirt-iso-uploader that is dependency of ovirt-engine?
> > I can publish otopi at same repository...
>
> we're not installing ovirt-engine yet as well..
Right... this is OK, I am talking about the dependencies.
>
> >
> > > if not, you can open a ticket for it in
> > > https://fedorahosted.org/ovirt/report/1.
> >
> > If not what? not objection? I will wait.
>
> yes, let's wait to hear other team members opinion on this.
>
> >
> > Thanks!
> > Alon
> >
Hello People,
In order to build ovirt-engine-3.2 rpms we will need two packages installed on build
slaves, these packages are part of our development:
- otopi
- ovirt-host-deploy
These packages contain jars required as build dependency of ovirt-engine.
The question is how do we want to manage it? The simplest approach is to install the
required rpm on the build slaves.
More complex approach may be to use mock to build ovirt-engine rpms.
What do you think? We need a solution in relative short time.
Thanks,
Alon
6:23 a.m.
> > > > ----- Original Message -----
> > > > > From: "Alon Bar-Lev" <alonbl(a)redhat.com>
> > > > > To: infra(a)ovirt.org
> > > > > Cc: "Eyal Edri" <eedri(a)redhat.com>
> > > > > Sent: Monday, November 26, 2012 2:47:16 PM
> > > > > Subject: [jenkins] Add otp rpms to build slaves
> > > > >
> > > > > Hello,
> > > > >
> > > > > Reminder: I am re-writing the vdsm-bootstrap. It is split
> > > > > out
> > > > > to
> > > > > own
> > > > > packages ovirt-host-deploy, and otopi.
> > > > > otopi is common installation framework that may be used by
> > > > > other
> > > > > components as well.
> > > > >
> > > > > otopi build job is available at[1].
> > > > >
> > > > > In order to build ovirt-host-deploy rpms in jenkins I need
> > > > > otopi-devel, otopi-java, otopi to be installed at slaves
> > > > > machines.
> > > > >
> > > > > These can be acquired from [2].
> > > > >
> > > > > What is the procedure for this?
> > > >
> > > > Long term: this will involve creating a relevant puppet
> > > > classes
> > > > and
> > > > applying it to the jenkins slaves
> > > > with foreman and puppet master.
> > >
> > > Looking for short term for now...
> > >
> > > > Short term: manual adding these repos to the jenkins slaves,
> > > > then
> > > > you
> > > > can install them via the system job in jenkins.
> > > > (unless there is an objection on the team, for having custom
> > > > builds
> > > > repo on jenkins slaves.. thoughts?)
> > >
> > > What have we done with a package such as vdsm-bootstrap?
> > > Is it installed? from which repository?
> >
> > it's not, we're not running a bootstrap tests yet, it reuquires a
> > real host (or nested)
> > which we don't have yet.
>
> Oh!!! we had no such BuildRequires of any of our components.
> This is going to change as ovirt-engine will require
> ovirt-host-deploy-java to build.
>
> >
> > > Or ovirt-iso-uploader that is dependency of ovirt-engine?
> > > I can publish otopi at same repository...
> >
> > we're not installing ovirt-engine yet as well..
>
> Right... this is OK, I am talking about the dependencies.
>
> >
> > >
> > > > if not, you can open a ticket for it in
> > > > https://fedorahosted.org/ovirt/report/1.
> > >
> > > If not what? not objection? I will wait.
> >
> > yes, let's wait to hear other team members opinion on this.
> >
> > >
> > > Thanks!
> > > Alon
> > >
Hello People,
In order to build ovirt-engine-3.2 rpms we will need two packages
installed on build slaves, these packages are part of our
development:
- otopi
- ovirt-host-deploy
These packages contain jars required as build dependency of
ovirt-engine.
The question is how do we want to manage it? The simplest approach is
to install the required rpm on the build slaves.
More complex approach may be to use mock to build ovirt-engine rpms.
What do you think? We need a solution in relative short time.
Thanks,
Alon
OK, for the short term, i don't see any harm in adding the nightly repo for fedora 17
slaves so otopi and ovirt-host-deploy can be installed.
we'll add it as a puppet class once our environment is up and running.
4373
days inactive
4374
days old
6 comments
2 participants
participants (2)
-
Alon Bar-Lev -
Eyal Edri