1:08 p.m.
I'm extending the VDSM functional tests, and saving files under
/tmp/vdsm-results/ - can I simply ask somehow to get all files from there,
perhaps via the init.json.ini file would be the right place to add this?
TIA,
Y.
1:16 p.m.
On 04/13 21:08, Yaniv Kaul wrote:
I'm extending the VDSM functional tests, and saving files under
/tmp/vdsm-results/ - can I simply ask somehow to get all files from there,
perhaps via the init.json.ini file would be the right place to add this?
You can use the artifacts entry in the vm definition of the init config file,
you can see an example here:
https://github.com/lago-project/lago/blob/master/tests/functional/fixture...
just specify the path to the directory instead of a file and it should
recursively pull it
TIA,
Y.
_______________________________________________
lago-devel mailing list
lago-devel(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/lago-devel
--
David Caro
Red Hat S.L.
Continuous Integration Engineer - EMEA ENG Virtualization R&D
Tel.: +420 532 294 605
Email: dcaro(a)redhat.com
IRC: dcaro|dcaroest@{freenode|oftc|redhat}
Web: www.redhat.com
RHT Global #: 82-62605
2:54 a.m.
to get the files from there to where? to be accessable from the jenkins
page after the build is done?
if so, I do it by copying the files I need to "exported-artifacts" folders,
then I also added the simple index.html with links to the files and folders
that I consider relevant for the results . this I do in the
build-artifacts.sh
On Wed, Apr 13, 2016 at 9:16 PM, David Caro <dcaro(a)redhat.com> wrote:
On 04/13 21:08, Yaniv Kaul wrote:
> I'm extending the VDSM functional tests, and saving files under
> /tmp/vdsm-results/ - can I simply ask somehow to get all files from
there,
> perhaps via the init.json.ini file would be the right place to add this?
You can use the artifacts entry in the vm definition of the init config
file,
you can see an example here:
https://github.com/lago-project/lago/blob/master/tests/functional/fixture...
just specify the path to the directory instead of a file and it should
recursively pull it
>
> TIA,
> Y.
> _______________________________________________
> lago-devel mailing list
> lago-devel(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/lago-devel
--
David Caro
Red Hat S.L.
Continuous Integration Engineer - EMEA ENG Virtualization R&D
Tel.: +420 532 294 605
Email: dcaro(a)redhat.com
IRC: dcaro|dcaroest@{freenode|oftc|redhat}
Web: www.redhat.com
RHT Global #: 82-62605
_______________________________________________
lago-devel mailing list
lago-devel(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/lago-devel
--
*Yaniv Bronhaim.*
2:59 a.m.
On 04/14 10:54, Yaniv Bronheim wrote:
to get the files from there to where? to be accessable from the
jenkins
page after the build is done?
I think I misunderstood something.
So the files you are storing under /tmp/vdsm-results, are the already
collected artifacts? If so, to get them pulled by jenkins then yes, you have
to move them to exported-artifacts. This is like that because we are using the
same standard for all the projects, so the jenkins code that we use for all of
them is the same.
If the /tmp/vdsm-results directiory is inside one of the vms created by lago
and used for the vdsm functional tests, then to get it out when you do the
'lago collect' you should add it to the artifacts entry in the init.json/yaml
if so, I do it by copying the files I need to
"exported-artifacts" folders,
then I also added the simple index.html with links to the files and folders
that I consider relevant for the results . this I do in the
build-artifacts.sh
On Wed, Apr 13, 2016 at 9:16 PM, David Caro <dcaro(a)redhat.com> wrote:
> On 04/13 21:08, Yaniv Kaul wrote:
> > I'm extending the VDSM functional tests, and saving files under
> > /tmp/vdsm-results/ - can I simply ask somehow to get all files from
> there,
> > perhaps via the init.json.ini file would be the right place to add this?
>
> You can use the artifacts entry in the vm definition of the init config
> file,
> you can see an example here:
>
>
>
https://github.com/lago-project/lago/blob/master/tests/functional/fixture...
>
> just specify the path to the directory instead of a file and it should
> recursively pull it
>
> >
> > TIA,
> > Y.
>
> > _______________________________________________
> > lago-devel mailing list
> > lago-devel(a)ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/lago-devel
>
>
> --
> David Caro
>
> Red Hat S.L.
> Continuous Integration Engineer - EMEA ENG Virtualization R&D
>
> Tel.: +420 532 294 605
> Email: dcaro(a)redhat.com
> IRC: dcaro|dcaroest@{freenode|oftc|redhat}
> Web: www.redhat.com
> RHT Global #: 82-62605
>
> _______________________________________________
> lago-devel mailing list
> lago-devel(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/lago-devel
>
>
--
*Yaniv Bronhaim.*
--
David Caro
Red Hat S.L.
Continuous Integration Engineer - EMEA ENG Virtualization R&D
Tel.: +420 532 294 605
Email: dcaro(a)redhat.com
IRC: dcaro|dcaroest@{freenode|oftc|redhat}
Web: www.redhat.com
RHT Global #: 82-62605
5:22 a.m.
On Thu, Apr 14, 2016 at 10:59 AM, David Caro <dcaro(a)redhat.com> wrote:
On 04/14 10:54, Yaniv Bronheim wrote:
> to get the files from there to where? to be accessable from the jenkins
> page after the build is done?
I think I misunderstood something.
So the files you are storing under /tmp/vdsm-results, are the already
collected artifacts? If so, to get them pulled by jenkins then yes, you
have
to move them to exported-artifacts. This is like that because we are using
the
same standard for all the projects, so the jenkins code that we use for
all of
them is the same.
If the /tmp/vdsm-results directiory is inside one of the vms created by
lago
and used for the vdsm functional tests, then to get it out when you do the
'lago collect' you should add it to the artifacts entry in the
init.json/yaml
Yep, that's what I *think* I need to do. I'll test that.
But I suspect, since I've marked my hosts as 'hosts' for oVirt sake (since
otherwise no repository will be created!), that it tries to collect vdsm
logs - which may not exist if we fail before we even created the VDSM RPMs
- this is exactly where the scp from the VMs should not abort.
Y.
> if so, I do it by copying the files I need to
"exported-artifacts"
folders,
> then I also added the simple index.html with links to the files and
folders
> that I consider relevant for the results . this I do in the
> build-artifacts.sh
>
>
> On Wed, Apr 13, 2016 at 9:16 PM, David Caro <dcaro(a)redhat.com> wrote:
>
> > On 04/13 21:08, Yaniv Kaul wrote:
> > > I'm extending the VDSM functional tests, and saving files under
> > > /tmp/vdsm-results/ - can I simply ask somehow to get all files from
> > there,
> > > perhaps via the init.json.ini file would be the right place to add
this?
> >
> > You can use the artifacts entry in the vm definition of the init config
> > file,
> > you can see an example here:
> >
> >
> >
https://github.com/lago-project/lago/blob/master/tests/functional/fixture...
> >
> > just specify the path to the directory instead of a file and it should
> > recursively pull it
> >
> > >
> > > TIA,
> > > Y.
> >
> > > _______________________________________________
> > > lago-devel mailing list
> > > lago-devel(a)ovirt.org
> > > http://lists.ovirt.org/mailman/listinfo/lago-devel
> >
> >
> > --
> > David Caro
> >
> > Red Hat S.L.
> > Continuous Integration Engineer - EMEA ENG Virtualization R&D
> >
> > Tel.: +420 532 294 605
> > Email: dcaro(a)redhat.com
> > IRC: dcaro|dcaroest@{freenode|oftc|redhat}
> > Web: www.redhat.com
> > RHT Global #: 82-62605
> >
> > _______________________________________________
> > lago-devel mailing list
> > lago-devel(a)ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/lago-devel
> >
> >
>
>
> --
> *Yaniv Bronhaim.*
--
David Caro
Red Hat S.L.
Continuous Integration Engineer - EMEA ENG Virtualization R&D
Tel.: +420 532 294 605
Email: dcaro(a)redhat.com
IRC: dcaro|dcaroest@{freenode|oftc|redhat}
Web: www.redhat.com
RHT Global #: 82-62605
5:26 a.m.
On 04/14 13:22, Yaniv Kaul wrote:
On Thu, Apr 14, 2016 at 10:59 AM, David Caro <dcaro(a)redhat.com>
wrote:
> On 04/14 10:54, Yaniv Bronheim wrote:
> > to get the files from there to where? to be accessable from the jenkins
> > page after the build is done?
>
> I think I misunderstood something.
> So the files you are storing under /tmp/vdsm-results, are the already
> collected artifacts? If so, to get them pulled by jenkins then yes, you
> have
> to move them to exported-artifacts. This is like that because we are using
> the
> same standard for all the projects, so the jenkins code that we use for
> all of
> them is the same.
>
> If the /tmp/vdsm-results directiory is inside one of the vms created by
> lago
> and used for the vdsm functional tests, then to get it out when you do the
> 'lago collect' you should add it to the artifacts entry in the
> init.json/yaml
>
Yep, that's what I *think* I need to do. I'll test that.
But I suspect, since I've marked my hosts as 'hosts' for oVirt sake (since
otherwise no repository will be created!), that it tries to collect vdsm
logs - which may not exist if we fail before we even created the VDSM RPMs
- this is exactly where the scp from the VMs should not abort.
You can override that using 'lago collect' instead of 'lago ovirt
collect'. The
former will not treat the hosts in any special way.
In the worst case, you can also try to run the 'copy-from-vm' command to
extract specific directories instead.
Y.
> > if so, I do it by copying the files I need to "exported-artifacts"
> folders,
> > then I also added the simple index.html with links to the files and
> folders
> > that I consider relevant for the results . this I do in the
> > build-artifacts.sh
> >
> >
> > On Wed, Apr 13, 2016 at 9:16 PM, David Caro <dcaro(a)redhat.com> wrote:
> >
> > > On 04/13 21:08, Yaniv Kaul wrote:
> > > > I'm extending the VDSM functional tests, and saving files under
> > > > /tmp/vdsm-results/ - can I simply ask somehow to get all files from
> > > there,
> > > > perhaps via the init.json.ini file would be the right place to add
> this?
> > >
> > > You can use the artifacts entry in the vm definition of the init config
> > > file,
> > > you can see an example here:
> > >
> > >
> > >
>
https://github.com/lago-project/lago/blob/master/tests/functional/fixture...
> > >
> > > just specify the path to the directory instead of a file and it should
> > > recursively pull it
> > >
> > > >
> > > > TIA,
> > > > Y.
> > >
> > > > _______________________________________________
> > > > lago-devel mailing list
> > > > lago-devel(a)ovirt.org
> > > > http://lists.ovirt.org/mailman/listinfo/lago-devel
> > >
> > >
> > > --
> > > David Caro
> > >
> > > Red Hat S.L.
> > > Continuous Integration Engineer - EMEA ENG Virtualization R&D
> > >
> > > Tel.: +420 532 294 605
> > > Email: dcaro(a)redhat.com
> > > IRC: dcaro|dcaroest@{freenode|oftc|redhat}
> > > Web: www.redhat.com
> > > RHT Global #: 82-62605
> > >
> > > _______________________________________________
> > > lago-devel mailing list
> > > lago-devel(a)ovirt.org
> > > http://lists.ovirt.org/mailman/listinfo/lago-devel
> > >
> > >
> >
> >
> > --
> > *Yaniv Bronhaim.*
>
> --
> David Caro
>
> Red Hat S.L.
> Continuous Integration Engineer - EMEA ENG Virtualization R&D
>
> Tel.: +420 532 294 605
> Email: dcaro(a)redhat.com
> IRC: dcaro|dcaroest@{freenode|oftc|redhat}
> Web: www.redhat.com
> RHT Global #: 82-62605
>
--
David Caro
Red Hat S.L.
Continuous Integration Engineer - EMEA ENG Virtualization R&D
Tel.: +420 532 294 605
Email: dcaro(a)redhat.com
IRC: dcaro|dcaroest@{freenode|oftc|redhat}
Web: www.redhat.com
RHT Global #: 82-62605
5:31 a.m.
On 04/14 12:26, David Caro wrote:
On 04/14 13:22, Yaniv Kaul wrote:
> On Thu, Apr 14, 2016 at 10:59 AM, David Caro <dcaro(a)redhat.com> wrote:
>
> > On 04/14 10:54, Yaniv Bronheim wrote:
> > > to get the files from there to where? to be accessable from the jenkins
> > > page after the build is done?
> >
> > I think I misunderstood something.
> > So the files you are storing under /tmp/vdsm-results, are the already
> > collected artifacts? If so, to get them pulled by jenkins then yes, you
> > have
> > to move them to exported-artifacts. This is like that because we are using
> > the
> > same standard for all the projects, so the jenkins code that we use for
> > all of
> > them is the same.
> >
> > If the /tmp/vdsm-results directiory is inside one of the vms created by
> > lago
> > and used for the vdsm functional tests, then to get it out when you do the
> > 'lago collect' you should add it to the artifacts entry in the
> > init.json/yaml
> >
>
> Yep, that's what I *think* I need to do. I'll test that.
> But I suspect, since I've marked my hosts as 'hosts' for oVirt sake
(since
> otherwise no repository will be created!), that it tries to collect vdsm
> logs - which may not exist if we fail before we even created the VDSM RPMs
> - this is exactly where the scp from the VMs should not abort.
You can override that using 'lago collect' instead of 'lago ovirt
collect'. The
former will not treat the hosts in any special way.
In the worst case, you can also try to run the 'copy-from-vm' command to
extract specific directories instead.
Another option is https://github.com/lago-project/lago/pull/211
Just adding the --skip-on-missing (or similar) option to collect would allow
you to run 'lago ovirt collect' and let it ignore the missing vdsm logs too.
Let me know if you need help with that, we could probably make it part of
friday's release.
> Y.
>
>
> > > if so, I do it by copying the files I need to
"exported-artifacts"
> > folders,
> > > then I also added the simple index.html with links to the files and
> > folders
> > > that I consider relevant for the results . this I do in the
> > > build-artifacts.sh
> > >
> > >
> > > On Wed, Apr 13, 2016 at 9:16 PM, David Caro <dcaro(a)redhat.com>
wrote:
> > >
> > > > On 04/13 21:08, Yaniv Kaul wrote:
> > > > > I'm extending the VDSM functional tests, and saving files
under
> > > > > /tmp/vdsm-results/ - can I simply ask somehow to get all files
from
> > > > there,
> > > > > perhaps via the init.json.ini file would be the right place to
add
> > this?
> > > >
> > > > You can use the artifacts entry in the vm definition of the init
config
> > > > file,
> > > > you can see an example here:
> > > >
> > > >
> > > >
> >
https://github.com/lago-project/lago/blob/master/tests/functional/fixture...
> > > >
> > > > just specify the path to the directory instead of a file and it
should
> > > > recursively pull it
> > > >
> > > > >
> > > > > TIA,
> > > > > Y.
> > > >
> > > > > _______________________________________________
> > > > > lago-devel mailing list
> > > > > lago-devel(a)ovirt.org
> > > > > http://lists.ovirt.org/mailman/listinfo/lago-devel
> > > >
> > > >
> > > > --
> > > > David Caro
> > > >
> > > > Red Hat S.L.
> > > > Continuous Integration Engineer - EMEA ENG Virtualization R&D
> > > >
> > > > Tel.: +420 532 294 605
> > > > Email: dcaro(a)redhat.com
> > > > IRC: dcaro|dcaroest@{freenode|oftc|redhat}
> > > > Web: www.redhat.com
> > > > RHT Global #: 82-62605
> > > >
> > > > _______________________________________________
> > > > lago-devel mailing list
> > > > lago-devel(a)ovirt.org
> > > > http://lists.ovirt.org/mailman/listinfo/lago-devel
> > > >
> > > >
> > >
> > >
> > > --
> > > *Yaniv Bronhaim.*
> >
> > --
> > David Caro
> >
> > Red Hat S.L.
> > Continuous Integration Engineer - EMEA ENG Virtualization R&D
> >
> > Tel.: +420 532 294 605
> > Email: dcaro(a)redhat.com
> > IRC: dcaro|dcaroest@{freenode|oftc|redhat}
> > Web: www.redhat.com
> > RHT Global #: 82-62605
> >
--
David Caro
Red Hat S.L.
Continuous Integration Engineer - EMEA ENG Virtualization R&D
Tel.: +420 532 294 605
Email: dcaro(a)redhat.com
IRC: dcaro|dcaroest@{freenode|oftc|redhat}
Web: www.redhat.com
RHT Global #: 82-62605
--
David Caro
Red Hat S.L.
Continuous Integration Engineer - EMEA ENG Virtualization R&D
Tel.: +420 532 294 605
Email: dcaro(a)redhat.com
IRC: dcaro|dcaroest@{freenode|oftc|redhat}
Web: www.redhat.com
RHT Global #: 82-62605
2931
days inactive
2932
days old
6 comments
3 participants
participants (3)
-
David Caro -
Yaniv Bronheim -
Yaniv Kaul