11:56 a.m.
Hi,
----- Original Message -----
From: "Renchu Mathew" <renchu(a)cracknell.com>
To: "Eli Mesika" <emesika(a)redhat.com>
Cc: "Martin Perina" <mperina(a)redhat.com>, users(a)ovirt.org
Sent: Thursday, March 19, 2015 9:30:30 AM
Subject: RE: [ovirt-users] Power Management config on Ovirt
Hi Eli/Martin,
On each host power management I have given the other hosts iRMC IPMI address.
Is that correct or I have to give same hosts management IP?
Each host should have its own IPMI address assigned in PM settings.
For example you have these two hosts:
1. host1 with IP1 and IPMI1
2. host2 with IP2 and IPMI2
So when you define a host in oVirt you should use these values in host
configuration:
1. host1
IP Address: IP1
Power Management IP address: IPMI1
2. host2
IP Address: IP2
Power Management IP address: IPMI2
Ovirt engine is
installed on another machine and it can reach the iRMC management IP of each
host. My setup is as below.
This is correct, but it's not necessary for engine machine to access power
management IPs. But it's required that each host in the cluster have to
be able to access all other host power management interfaces. Engine will
select one functional host (fence proxy) and on this host power management
action is executed. For example you may have this scenario:
1. host1 is Up, connection to host2 is broken
2. engine will select host1 as fence proxy
3. On host1 power management commands are executed (status, stop, start)
2 hosts with 6 NICs configured as bond0 on each host. Another IP given for
iRMC management port on each host and this IP is configured on the other
host power management. VM stored on glusterfs storage and engine installed
on another server. I can able to create VM and manually migrate but if one
host is down, VM is not migrating to other host. What do I add more to
achieve this.
It looks OK except for power management IP address, see above.
Martin
Regards
Renchu Mathew
-----Original Message-----
From: Eli Mesika [mailto:emesika@redhat.com]
Sent: Wednesday, March 18, 2015 5:51 PM
To: Renchu Mathew
Cc: Martin Perina; users(a)ovirt.org
Subject: Re: [ovirt-users] Power Management config on Ovirt
----- Original Message -----
> From: "Renchu Mathew" <renchu(a)cracknell.com>
> To: "Eli Mesika" <emesika(a)redhat.com>
> Cc: "Martin Perina" <mperina(a)redhat.com>, users(a)ovirt.org
> Sent: Wednesday, March 18, 2015 3:15:40 PM
> Subject: RE: [ovirt-users] Power Management config on Ovirt
>
> Hi Eli,
>
> Those 2 hosts are connected with Fujitsu iRMC management port and power
> management is configured with ipmi. So it can use this connection to fence
> the other node, is it correct?
No, keep in mind that the one that communicates with the proxy host is the
oVirt engine, so , if it is not accessable, oVirt engine can not use it
>
> Regards
>
> Renchu Mathew
>
> -----Original Message-----
> From: Eli Mesika [mailto:emesika@redhat.com]
> Sent: Wednesday, March 18, 2015 4:31 PM
> To: Renchu Mathew
> Cc: Martin Perina; users(a)ovirt.org
> Subject: Re: [ovirt-users] Power Management config on Ovirt
>
>
>
> ----- Original Message -----
> > From: "Renchu Mathew" <renchu(a)cracknell.com>
> > To: "Martin Perina" <mperina(a)redhat.com>
> > Cc: users(a)ovirt.org
> > Sent: Wednesday, March 18, 2015 2:24:46 PM
> > Subject: Re: [ovirt-users] Power Management config on Ovirt
> >
> > Hi Martin,
> >
> > My setup meets all those requirements and I can able to migrate the VM
> > from one host to another manually. Once network cable is pulled off
> > from one of the server other server is also shuts down.
>
> Hi
> Sorry for jumping in late , Yesterday was an election day in ISRAEL...
>
> If the other server shuts down when you plug-off the first one and you have
> only 2 hosts then no fencing will take place since there is no available
> proxy host to perform the operation
>
> >
> > Regards
> >
> > Renchu Mathew | Sr. IT Administrator
> >
> >
> >
> > CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T
> > +971 4
> > 3445417 | F +971 4 3493675 | M +971 50 7386484 ABU DHABI | DUBAI |
> > LONDON | MUSCAT | DOHA | JEDDAH EMAIL renchu(a)cracknell.com | WEB
> > www.cracknell.com
> >
> > This email, its content and any files transmitted with it are intended
> > solely for the addressee(s) and may be legally privileged and/or
> > confidential. If you are not the intended recipient please let us know
> > by email reply and delete it from the system. Please note that any
> > views or opinions presented in this email do not necessarily represent
> > those of the company. Email transmissions cannot be guaranteed to be
> > secure or error-free as information could be intercepted, corrupted,
> > lost, destroyed, arrive late or incomplete, or contain viruses. The
> > company therefore does not accept liability for any errors or
> > omissions in the contents of this message which arise as a result of
> > email
> > transmission.
> >
> >
> > -----Original Message-----
> > From: Martin Perina [mailto:mperina@redhat.com]
> > Sent: Tuesday, March 17, 2015 8:31 PM
> > To: Renchu Mathew
> > Cc: users(a)ovirt.org
> > Subject: Re: [ovirt-users] Power Management config on Ovirt
> >
> > Hi,
> >
> > prior to the test I would check this:
> >
> > - Data Center status is Up
> > - All hosts status is Up
> > - All storage domains status is Up
> > - VM is running
> >
> > If this is valid, you can start your fence testing. But bear in mind
> > what I sent you in previous email: at least one host in DC should be
> > fully functional to be able to fence non responsive host.
> >
> > Martin Perina
> >
> > ----- Original Message -----
> > > From: "Renchu Mathew" <renchu(a)cracknell.com>
> > > To: "Martin Perina" <mperina(a)redhat.com>
> > > Cc: users(a)ovirt.org
> > > Sent: Tuesday, March 17, 2015 5:03:53 PM
> > > Subject: RE: [ovirt-users] Power Management config on Ovirt
> > >
> > > Hi Martin
> > >
> > > Yes, my test VM still running on this storage. Is it possible to do
> > > remote session and check this?
> > >
> > > Regards
> > >
> > > Renchu Mathew
> > >
> > >
> > > -----Original Message-----
> > > From: Martin Perina [mailto:mperina@redhat.com]
> > > Sent: Tuesday, March 17, 2015 7:30 PM
> > > To: Renchu Mathew
> > > Cc: users(a)ovirt.org
> > > Subject: Re: [ovirt-users] Power Management config on Ovirt
> > >
> > > Hi,
> > >
> > > this is what happened (at least what I was able to read from log):
> > >
> > > 18:18:02 - host node02 changed status to Connecting
> > >
> > > - that's OK, but prior to this I can see many errors
> > > from ConnectStorage*Commands. Are you sure that your storage
> > > was ok prior to fencing test?
> > >
> > > 18:18:51 - host node02 changed status to Non Responsive
> > >
> > > - that's OK, non responding treatment started with SSH Soft
> > > Fencing
> > >
> > >
> > > 18:18:55 - SSH Soft Fencing failed, because of no route to host
> > > node02
> > >
> > > - that's OK
> > >
> > >
> > > 18:18:56 - power management stop was executed using node01 as fence
> > > proxy
> > >
> > > - problem started here, communication with node01 was timed out, we
> > > were
> > > not able to find any other suitable fence proxy
> > >
> > > 18:21:57 - host node01 changed status to Connection
> > >
> > >
> > > From this point there's is nothing that can be done, because engine
> > > cannot communicate with any host, so it cannot fix anything.
> > >
> > > When you are doing those tests you need at least one functional
> > > host, otherwise you are not able to execute any fence action.
> > >
> > >
> > > Martin Perina
> > >
> > >
> > > ----- Original Message -----
> > > > From: "Renchu Mathew" <renchu(a)cracknell.com>
> > > > To: "Martin Perina" <mperina(a)redhat.com>
> > > > Cc: users(a)ovirt.org
> > > > Sent: Tuesday, March 17, 2015 3:53:24 PM
> > > > Subject: RE: [ovirt-users] Power Management config on Ovirt
> > > >
> > > > Hi Martin,
> > > >
> > > > Please find attached the log files.
> > > >
> > > > Regards
> > > >
> > > > Renchu Mathew
> > > >
> > > > -----Original Message-----
> > > > From: Martin Perina [mailto:mperina@redhat.com]
> > > > Sent: Tuesday, March 17, 2015 6:40 PM
> > > > To: Renchu Mathew
> > > > Cc: users(a)ovirt.org
> > > > Subject: Re: [ovirt-users] Power Management config on Ovirt
> > > >
> > > > Hi,
> > > >
> > > > please attach new logs, so we can investigate what has happened.
> > > >
> > > > Thanks
> > > >
> > > > Martin Perina
> > > >
> > > > ----- Original Message -----
> > > > > From: "Renchu Mathew" <renchu(a)cracknell.com>
> > > > > To: "Martin Perina" <mperina(a)redhat.com>
> > > > > Cc: "Piotr Kliczewski"
<piotr.kliczewski(a)gmail.com>,
> > > > > users(a)ovirt.org
> > > > > Sent: Tuesday, March 17, 2015 3:34:11 PM
> > > > > Subject: RE: [ovirt-users] Power Management config on Ovirt
> > > > >
> > > > > Hi Martin,
> > > > >
> > > > > I did the same as below. But is still does the same. Node01 is
> > > > > shutdown. Do you think RHEV + gluster storage will not have
this
> > > > > issue. What storage do you recommend?
> > > > >
> > > > > Regards
> > > > >
> > > > > Renchu Mathew
> > > > >
> > > > > -----Original Message-----
> > > > > From: Martin Perina [mailto:mperina@redhat.com]
> > > > > Sent: Tuesday, March 17, 2015 5:35 PM
> > > > > To: Renchu Mathew
> > > > > Cc: Piotr Kliczewski; users(a)ovirt.org
> > > > > Subject: Re: [ovirt-users] Power Management config on Ovirt
> > > > >
> > > > > Hi,
> > > > >
> > > > > I don't know much about gluster configuration, but one of
the
> > > > > following should work:
> > > > >
> > > > > 1. Turn off you host networking completely for example using
> > > > > /sbin/ifdown
> > > > > (you will need to access your node locally or using remote
> > > > > serial
> > > > > console, for example IPMI)
> > > > >
> > > > > 2. Block engine and all gluster hosts using iptables
> > > > >
> > > > > 3. Disable "Skip fencing if host has live lease on
storage" option
> > > > > in Cluster Fencing Policy and block connection between host
and
> > > > > engine
> > > > > (in this case storage connection won't be checked prior
to
> > > > > fencing)
> > > > >
> > > > >
> > > > > Martin Perina
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > > From: "Renchu Mathew"
<renchu(a)cracknell.com>
> > > > > > To: "Martin Perina" <mperina(a)redhat.com>
> > > > > > Cc: "Piotr Kliczewski"
<piotr.kliczewski(a)gmail.com>,
> > > > > > users(a)ovirt.org
> > > > > > Sent: Tuesday, March 17, 2015 2:26:29 PM
> > > > > > Subject: RE: [ovirt-users] Power Management config on
Ovirt
> > > > > >
> > > > > > Martin,
> > > > > > Yes, I need to test the VM migration. So can you please
tell
> > > > > > me how to block the host connection to storage? It is a
> > > > > > glusterfs volume with distribute option as below.
> > > > > >
> > > > > > Volume Name: VM-Store
> > > > > > Type: Distribute
> > > > > > Volume ID: 59e40310-476d-449f-b700-cab69b829930
> > > > > > Status: Started
> > > > > > Number of Bricks: 1
> > > > > > Transport-type: tcp
> > > > > > Bricks:
> > > > > > Brick1: storage1:/VM/VM-Store
> > > > > > Options Reconfigured:
> > > > > > server.allow-insecure: on
> > > > > > storage.owner-gid: 36
> > > > > > storage.owner-uid: 36
> > > > > >
> > > > > > Many thanks for all of your support.
> > > > > >
> > > > > > Regards
> > > > > >
> > > > > > Renchu Mathew | Sr. IT Administrator
> > > > > >
> > > > > >
> > > > > >
> > > > > > CRACKNELL DUBAI | P.O. Box 66231 | United Arab
Emirates
> > > > > > | T
> > > > > > +971 4
> > > > > > 3445417 | F +971 4 3493675 | M +971 50 7386484 ABU DHABI
|
> > > > > > DUBAI
> > > > > > | LONDON | MUSCAT | DOHA | JEDDAH
EMAIL renchu(a)cracknell.com |
> > > > > > | WEB
> > > > > > www.cracknell.com
> > > > > >
> > > > > > This email, its content and any files transmitted with it
are
> > > > > > intended solely for the addressee(s) and may be legally
> > > > > > privileged and/or confidential. If you are not the
intended
> > > > > > recipient please let us know by email reply and delete it
from
> > > > > > the system. Please note that any views or opinions
presented
> > > > > > in this email do not necessarily represent those of the
company.
> > > > > > Email transmissions cannot be guaranteed to be secure or
> > > > > > error-free as information could be intercepted, corrupted,
> > > > > > lost, destroyed, arrive late or incomplete, or contain
> > > > > > viruses. The company therefore does not accept liability
for
> > > > > > any errors or omissions in the contents of this message
which
> > > > > > arise as a result of email transmission.
> > > > > >
> > > > > >
> > > > > > -----Original Message-----
> > > > > > From: Martin Perina [mailto:mperina@redhat.com]
> > > > > > Sent: Tuesday, March 17, 2015 5:02 PM
> > > > > > To: Renchu Mathew
> > > > > > Cc: Piotr Kliczewski; users(a)ovirt.org
> > > > > > Subject: Re: [ovirt-users] Power Management config on
Ovirt
> > > > > >
> > > > > > Hi,
> > > > > >
> > > > > > your VM was not migrated, because host node02 was not
fenced.
> > > > > > And host
> > > > > > node02 was not fenced, because option "Skip fencing if
host
> > > > > > has live lease on storage" in your Cluster Fencing
Policy is
> > > > > > enabled.
> > > > > > Prior fencing of the host we check its storage connection
> > > > > > (renewal of its sanlock lease).
> > > > > > You should see an alert about it in Events/Alerts tab in
> > > > > > webadmin.
> > > > > >
> > > > > > So if you want to test VM migration on your cluster, have
also
> > > > > > block host connection to storage (and not only to engine).
> > > > > >
> > > > > > Also please take a look at "Skip fencing on cluster
> > > > > > connectivity issues"
> > > > > > option in Cluster Fencing Policy. If it's enabled and
set for
> > > > > > example to 50% and you have only two hosts in cluster,
then
> > > > > > your hosts won't be fenced at all due to it.
> > > > > >
> > > > > > Thanks
> > > > > >
> > > > > > Martin Perina
> > > > > >
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > > From: "Renchu Mathew"
<renchu(a)cracknell.com>
> > > > > > > To: "Piotr Kliczewski"
<piotr.kliczewski(a)gmail.com>
> > > > > > > Cc: "Piotr Kliczewski"
<pkliczew(a)redhat.com>,
> > > > > > > users(a)ovirt.org
> > > > > > > Sent: Tuesday, March 17, 2015 1:37:28 PM
> > > > > > > Subject: Re: [ovirt-users] Power Management config on
Ovirt
> > > > > > >
> > > > > > > Piotr,
> > > > > > >
> > > > > > > Please find attached log files. If I stop the network
of
> > > > > > > node02, the VM
> > > > > > > (Printserver) running on that is not automatically
migrating
> > > > > > > to
> > > > > > > node01 instead node01 is getting shutdown.
> > > > > > >
> > > > > > > Regards
> > > > > > >
> > > > > > > Renchu Mathew | Sr. IT Administrator
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > CRACKNELL DUBAI | P.O. Box 66231 | United Arab
> > > > > > > Emirates
> > > > > > > | T
> > > > > > > +971 4
> > > > > > > 3445417 | F +971 4 3493675 | M +971 50 7386484 ABU
DHABI
> > > > > > > | DUBAI
> > > > > > > | LONDON | MUSCAT | DOHA | JEDDAH
EMAIL renchu(a)cracknell.com
> > > > > > > | | WEB
> > > > > > > www.cracknell.com
> > > > > > >
> > > > > > > This email, its content and any files transmitted with
it
> > > > > > > are intended solely for the addressee(s) and may be
legally
> > > > > > > privileged and/or confidential. If you are not the
intended
> > > > > > > recipient please let us know by email reply and delete
it
> > > > > > > from the system. Please note that any views or
opinions
> > > > > > > presented in this email do not necessarily represent
those of
> > > > > > > the
> > > > > > > company.
> > > > > > > Email transmissions cannot be guaranteed to be secure
or
> > > > > > > error-free as information could be intercepted,
corrupted,
> > > > > > > lost, destroyed, arrive late or incomplete, or
contain
> > > > > > > viruses. The company therefore does not accept
liability for
> > > > > > > any errors or omissions in the contents of this
message
> > > > > > > which arise as a result of email transmission.
> > > > > > >
> > > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: Piotr Kliczewski
[mailto:piotr.kliczewski@gmail.com]
> > > > > > > Sent: Tuesday, March 17, 2015 3:35 PM
> > > > > > > To: Renchu Mathew
> > > > > > > Cc: Piotr Kliczewski; Eli Mesika; users(a)ovirt.org
> > > > > > > Subject: Re: [ovirt-users] Power Management config on
Ovirt
> > > > > > >
> > > > > > > On Tue, Mar 17, 2015 at 12:18 PM, Renchu Mathew
> > > > > > > <renchu(a)cracknell.com>
> > > > > > > wrote:
> > > > > > > > Hi Piotr,
> > > > > > > >
> > > > > > > > I have re-installed the node with ovirt node 3.5
latest
> > > > > > > > version and tried the power management and it
shows test
> > > > > > > > succeeded, on but if I stop the network of one of
the node
> > > > > > > > the running vm is not migrating to the other
instead both
> > > > > > > > the nodes are getting down.
> > > > > > > > Can anybody help me on this?
> > > > > > > >
> > > > > > >
> > > > > > > Please provide engine and both nodes logs for
analysis.
> > > > > > >
> > > > > > > >
> > > > > > > > Also is it possible to use the resources (CPU
cores and
> > > > > > > > memory) from other node in the same cluster or
combine 2
> > > > > > > > nodes in same clusters and create a vm on that.
> > > > > > > >
> > > > > > > > Regards
> > > > > > > >
> > > > > > > > Renchu Mathew
> > > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: Piotr Kliczewski
[mailto:pkliczew@redhat.com]
> > > > > > > > Sent: Tuesday, January 27, 2015 2:04 PM
> > > > > > > > To: Renchu Mathew
> > > > > > > > Cc: Piotr Kliczewski; Eli Mesika;
users(a)ovirt.org
> > > > > > > > Subject: Re: [ovirt-users] Power Management
config on
> > > > > > > > Ovirt
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > ----- Original Message -----
> > > > > > > >> From: "Renchu Mathew"
<renchu(a)cracknell.com>
> > > > > > > >> To: "Piotr Kliczewski"
<pkliczew(a)redhat.com>
> > > > > > > >> Cc: "Piotr Kliczewski"
<piotr.kliczewski(a)gmail.com>, "Eli
> > > > > > > >> Mesika"
> > > > > > > >> <emesika(a)redhat.com>, users(a)ovirt.org
> > > > > > > >> Sent: Tuesday, January 27, 2015 10:48:12 AM
> > > > > > > >> Subject: RE: [ovirt-users] Power Management
config on
> > > > > > > >> Ovirt
> > > > > > > >>
> > > > > > > >> Hi Piotr,
> > > > > > > >>
> > > > > > > >> Can you please provide me the link to
download the new node
> > > > > > > >> iso?
> > > > > > > >> I can see only ovirt live iso.
> > > > > > > >>
> > > > > > > >
> > > > > > > > I saw that Douglas sent following links in other
thread
> > > > > > > > [1] on this
> > > > > > > > list:
> > > > > > > >
> > > > > > > > centos7:
> > > > > > > >
http://jenkins.ovirt.org/job/ovirt-node_master_create-iso-
> > > > > > > > el
> > > > > > > > 7_
> > > > > > > > me
> > > > > > > > rg
> > > > > > > > ed
> > > > > > > > /
> > > > > > > >
> > > > > > > > Fedora20:
> > > > > > > >
http://jenkins.ovirt.org/job/ovirt-node_master_create-iso-
> > > > > > > > fc
> > > > > > > > 20
> > > > > > > > _m
> > > > > > > > er
> > > > > > > > ge
> > > > > > > > d/
> > > > > > > >
> > > > > > > > Please note that "We should share the
official iso this
> > > > > > > > week."
> > > > > > > >
> > > > > > > > [1]
> > > > > > > >
http://lists.ovirt.org/pipermail/users/2015-January/030846
> > > > > > > > .h
> > > > > > > > tm
> > > > > > > > l
> > > > > > > >
> > > > > > > >>
> > > > > > > >> Regards
> > > > > > > >>
> > > > > > > >> Renchu Mathew
> > > > > > > >>
> > > > > > > >> -----Original Message-----
> > > > > > > >> From: Piotr Kliczewski
[mailto:pkliczew@redhat.com]
> > > > > > > >> Sent: Tuesday, January 27, 2015 12:21 PM
> > > > > > > >> To: Renchu Mathew
> > > > > > > >> Cc: Piotr Kliczewski; Eli Mesika;
users(a)ovirt.org
> > > > > > > >> Subject: Re: [ovirt-users] Power Management
config on
> > > > > > > >> Ovirt
> > > > > > > >>
> > > > > > > >> Hi Mathew,
> > > > > > > >>
> > > > > > > >> It seems like this is quite old version
(September 2014).
> > > > > > > >> There were good number of fixes in this
area.
> > > > > > > >>
> > > > > > > >> Looking at provided logs I am not able to
tell which call
> > > > > > > >> is exactly failing.
> > > > > > > >> Do you have any steps to reproduce?
> > > > > > > >>
> > > > > > > >> Thanks,
> > > > > > > >> Piotr
> > > > > > > >>
> > > > > > > >> ----- Original Message -----
> > > > > > > >> From: "Renchu Mathew"
<renchu(a)cracknell.com>
> > > > > > > >> To: "Piotr Kliczewski"
<piotr.kliczewski(a)gmail.com>
> > > > > > > >> Cc: "Eli Mesika"
<emesika(a)redhat.com>, "Piotr Kliczewski"
> > > > > > > >> <pkliczew(a)redhat.com>, users(a)ovirt.org
> > > > > > > >> Sent: Monday, January 26, 2015 5:15:46 AM
> > > > > > > >> Subject: RE: [ovirt-users] Power Management
config on
> > > > > > > >> Ovirt
> > > > > > > >>
> > > > > > > >> Hi Piotr,
> > > > > > > >> VDSM Version is vdsm-4.16.4-0.el6
> > > > > > > >>
> > > > > > > >> Regards
> > > > > > > >>
> > > > > > > >> Renchu Mathew
> > > > > > > >> .
> > > > > > > >>
> > > > > > > >> From: Piotr Kliczewski
> > > > > > > >> [mailto:piotr.kliczewski@gmail.com]
> > > > > > > >> Sent: Sunday, January 25, 2015 6:08 PM
> > > > > > > >> To: Renchu Mathew
> > > > > > > >> Cc: Eli Mesika; Piotr Kliczewski;
users(a)ovirt.org
> > > > > > > >> Subject: Re: [ovirt-users] Power Management
config on
> > > > > > > >> Ovirt
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> On Sun, Jan 25, 2015 at 2:07 PM, Renchu
Mathew
> > > > > > > >>
<renchu@cracknell.com<mailto:renchu@cracknell.com>> wrote:
> > > > > > > >>
> > > > > > > >> Hi Eli,
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> I have 2 hypervisor host and both are
installed with
> > > > > > > >> below iso file.
> > > > > > > >> Master data domain is glusterfs which is
configured on
> > > > > > > >> another server.
> > > > > > > >> Is there any latest iso available?
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> ovirt-node-iso-3.5.0.ovirt35.20140912.el6
(Edited).
> > > > > > > >>
> > > > > > > >> @Eli - Do we know which vdsm version is in
this iso?
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> Please find below details.
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> [cid:image001.png@01D0393F.9A5CF2D0]
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> Thanks & Regards
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> Renchu Mathew
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> -----Original Message-----
> > > > > > > >> From: Eli Mesika
> > > > > > > >>
[mailto:emesika@redhat.com<mailto:emesika@redhat.com>]
> > > > > > > >> Sent: Sunday, January 25, 2015 4:46 PM
> > > > > > > >> To: Renchu Mathew
> > > > > > > >> Cc: Martin Perina;
> > > > > > > >>
users@ovirt.org<mailto:users@ovirt.org>;
> > > > > > > >> Piotr Kliczewski
> > > > > > > >> Subject: Re: [ovirt-users] Power Management
config on
> > > > > > > >> Ovirt
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> ----- Original Message -----
> > > > > > > >>
> > > > > > > >> > From: "Renchu Mathew"
> > > > > > > >> >
<renchu@cracknell.com<mailto:renchu@cracknell.com>>
> > > > > > > >>
> > > > > > > >> > To: "Eli Mesika"
> > > > > > > >> >
<emesika@redhat.com<mailto:emesika@redhat.com>>
> > > > > > > >>
> > > > > > > >> > Cc: "Martin Perina"
> > > > > > > >> >
<mperina@redhat.com<mailto:mperina@redhat.com>>,
> > > > > > > >> >
users@ovirt.org<mailto:users@ovirt.org>
> > > > > > > >>
> > > > > > > >> > Sent: Sunday, January 25, 2015 11:19:21
AM
> > > > > > > >>
> > > > > > > >> > Subject: RE: [ovirt-users] Power
Management config on
> > > > > > > >> > Ovirt
> > > > > > > >>
> > > > > > > >> >
> > > > > > > >>
> > > > > > > >> > Hi Eli,
> > > > > > > >>
> > > > > > > >> >
> > > > > > > >>
> > > > > > > >> > Please use any details.
> > > > > > > >>
> > > > > > > >> >
> > > > > > > >>
> > > > > > > >> > Thanks for your support.
> > > > > > > >>
> > > > > > > >> >
> > > > > > > >>
> > > > > > > >> > Regards
> > > > > > > >>
> > > > > > > >> >
> > > > > > > >>
> > > > > > > >> > Renchu Mathew
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> Hi again
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> Looking in the logs I see that this is a
issue we handled
> > > > > > > >> when we switched from XML RPC to JSON RPC
protocol.
> > > > > > > >>
> > > > > > > >> Which vdsm is installed in the proxy host ?
> > > > > > > >>
> > > > > > > >> I am adding Piotr who is on charge of the
JSON RPC
> > > > > > > >> protocol and who helped me in the past when I
got a
> > > > > > > >> similar error on PM operations
> > > > > > > >>
> > > > > > > >> It looks like marshaling issue but I am not
sure whether
> > > > > > > >> it was already fixed or it is something new.
I am not
> > > > > > > >> able to match a call when looking at
engine.log.
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> >
> > > > > > > >>
> > > > > > > >> > -----Original Message-----
> > > > > > > >>
> > > > > > > >> > From: Eli Mesika
> > > > > > > >> >
[mailto:emesika@redhat.com<mailto:emesika@redhat.com>]
> > > > > > > >>
> > > > > > > >> > Sent: Sunday, January 25, 2015 12:58 PM
> > > > > > > >>
> > > > > > > >> > To: Renchu Mathew
> > > > > > > >>
> > > > > > > >> > Cc: Martin Perina;
> > > > > > > >> >
users@ovirt.org<mailto:users@ovirt.org>
> > > > > > > >>
> > > > > > > >> > Subject: Re: [ovirt-users] Power
Management config on
> > > > > > > >> > Ovirt
> > > > > > > >>
> > > > > > > >> >
> > > > > > > >>
> > > > > > > >> > Hi Renchu
> > > > > > > >>
> > > > > > > >> >
> > > > > > > >>
> > > > > > > >> > I am looking currently on he case and
will respond
> > > > > > > >> > later on today
> > > > > > > >>
> > > > > > > >> > after investigating the logs.
> > > > > > > >>
> > > > > > > >> > If I will not find anything, can I use
the details for
> > > > > > > >> > the host PM
> > > > > > > >>
> > > > > > > >> > only for status command to try to debug
and find the
> > > > > > > >> > source of the problem ?
> > > > > > > >>
> > > > > > > >> >
> > > > > > > >>
> > > > > > > >> > Thanks
> > > > > > > >>
> > > > > > > >> >
> > > > > > > >>
> > > > > > > >> > Eli
> > > > > > > >>
> > > > > > > >> >
> > > > > > > >>
> > > > > > > >> > ----- Original Message -----
> > > > > > > >>
> > > > > > > >> > > From: "Renchu Mathew"
> > > > > > > >> > >
<renchu@cracknell.com<mailto:renchu@cracknell.com>>
> > > > > > > >>
> > > > > > > >> > > To: "Martin Perina"
> > > > > > > >> > >
<mperina@redhat.com<mailto:mperina@redhat.com>>
> > > > > > > >>
> > > > > > > >> > > Cc:
users@ovirt.org<mailto:users@ovirt.org>, "Eli
> > > > > > > >> > > Mesika"
> > > > > > > >> > >
<emesika@redhat.com<mailto:emesika@redhat.com>>
> > > > > > > >>
> > > > > > > >> > > Sent: Sunday, January 25, 2015
6:50:00 AM
> > > > > > > >>
> > > > > > > >> > > Subject: RE: [ovirt-users] Power
Management config on
> > > > > > > >> > > Ovirt
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > > Hi Martin,
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > > I got the below output when I run
the command and it
> > > > > > > >> > > works from both
> > > > > > > >>
> > > > > > > >> > > the nodes.
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > > fence_ipmilan -a 192.168.1.114 -l
admin -p admin -o
> > > > > > > >> > > status -v -P
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > > Getting status of
IPMI:192.168.1.114...Spawning:
> > > > > > > >> > > '/usr/bin/ipmitool
> > > > > > > >>
> > > > > > > >> > > -I lanplus -H
'192.168.1.114' -U 'admin' -P '[set]'
> > > > > > > >> > > -v chassis power
> > > > > > > >>
> > > > > > > >> > > status'...
> > > > > > > >>
> > > > > > > >> > > Chassis power = On
> > > > > > > >>
> > > > > > > >> > > Done
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > > Thanks
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > > Renchu Mathew | Sr. IT
Administrator
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > > CRACKNELL DUBAI | P.O. Box
66231 | United Arab
> > > > > > > >> > > Emirates
> > > > > > > >> > > |
> > > > > > > >> > > T
> > > > > > > >>
> > > > > > > >> > > +971 4
> > > > > > > >>
> > > > > > > >> > > 3445417 | F +971 4
> > > > > > > >> > >
3493675<tel:%2B971%204%203493675>
> > > > > > > >> > > | M
> > > > > > > >> > > +971
> > > > > > > >> > > 50
7386484<tel:%2B971%2050%207386484> ABU DHABI |
> > > > > > > >> > > DUBAI
> > > > > > > >>
> > > > > > > >> > > | LONDON | MUSCAT | DOHA | JEDDAH
EMAIL
> > > > > > > >> > > |
renchu@cracknell.com<mailto:renchu@cracknell.com> |
> > > > > > > >> > > | WEB
> > > > > > > >>
> > > > > > > >> > >
www.cracknell.com<http://www.cracknell.com>
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > > This email, its content and any
files transmitted
> > > > > > > >> > > with it are
> > > > > > > >>
> > > > > > > >> > > intended solely for the
addressee(s) and may be
> > > > > > > >> > > legally privileged
> > > > > > > >>
> > > > > > > >> > > and/or confidential. If you are not
the intended
> > > > > > > >> > > recipient please
> > > > > > > >>
> > > > > > > >> > > let us know by email reply and
delete it from the
> > > > > > > >> > > system.
> > > > > > > >> > > Please
> > > > > > > >>
> > > > > > > >> > > note that any views or opinions
presented in this
> > > > > > > >> > > email do not
> > > > > > > >>
> > > > > > > >> > > necessarily represent those of the
company. Email
> > > > > > > >> > > transmissions
> > > > > > > >>
> > > > > > > >> > > cannot be guaranteed to be secure
or error-free as
> > > > > > > >> > > information could
> > > > > > > >>
> > > > > > > >> > > be intercepted, corrupted, lost,
destroyed, arrive
> > > > > > > >> > > late or
> > > > > > > >>
> > > > > > > >> > > incomplete, or contain viruses. The
company therefore
> > > > > > > >> > > does not
> > > > > > > >>
> > > > > > > >> > > accept liability for any errors or
omissions in the
> > > > > > > >> > > contents of this
> > > > > > > >>
> > > > > > > >> > > message which arise as a result of
email transmission.
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > > -----Original Message-----
> > > > > > > >>
> > > > > > > >> > > From: Martin Perina
> > > > > > > >> > >
[mailto:mperina@redhat.com<mailto:mperina@redhat.com>
> > > > > > > >> > > ]
> > > > > > > >>
> > > > > > > >> > > Sent: Thursday, January 22, 2015
6:12 PM
> > > > > > > >>
> > > > > > > >> > > To: Renchu Mathew
> > > > > > > >>
> > > > > > > >> > > Cc:
users@ovirt.org<mailto:users@ovirt.org>; Eli
> > > > > > > >> > > Mesika
> > > > > > > >>
> > > > > > > >> > > Subject: Re: [ovirt-users] Power
Management config on
> > > > > > > >> > > Ovirt
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > > ----- Original Message -----
> > > > > > > >>
> > > > > > > >> > > > From: "Renchu
Mathew"
> > > > > > > >> > > >
<renchu@cracknell.com<mailto:renchu@cracknell.com>>
> > > > > > > >>
> > > > > > > >> > > > To: "Martin Perina"
> > > > > > > >> > > >
<mperina@redhat.com<mailto:mperina@redhat.com>>
> > > > > > > >>
> > > > > > > >> > > > Cc:
users@ovirt.org<mailto:users@ovirt.org>
> > > > > > > >>
> > > > > > > >> > > > Sent: Thursday, January 22,
2015 2:39:43 PM
> > > > > > > >>
> > > > > > > >> > > > Subject: RE: [ovirt-users]
Power Management config
> > > > > > > >> > > > on Ovirt
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > Hi Martin,
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > Yes. The vdsm host.log is from
node-02.
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > > That's strange, I cannot find
any call to fenceNode
> > > > > > > >> > > which should
> > > > > > > >>
> > > > > > > >> > > appear, if PM status is gathered.
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > > Eli, any idea?
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > > > I have checked the link and it
says we need to
> > > > > > > >> > > > install the sever
> > > > > > > >>
> > > > > > > >> > > > view management agent &
net-snmp on the hosts.
> > > > > > > >>
> > > > > > > >> > > > Do we need to try this? How to
install this on node?
> > > > > > > >> > > > I used the
> > > > > > > >>
> > > > > > > >> > > > below irmc admin user.
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > > Not, AFAIK this is needed only from
Clustersuite, but
> > > > > > > >> > > not for oVirt.
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > > But could you please execute this
command on node-20
> > > > > > > >> > > just to confirm
> > > > > > > >>
> > > > > > > >> > > that Fujitsu Primergy is
communicating through IPMI:
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > > fence_ipmilan -a IP -l USER -p
PASS -o status -v -P
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > > where IP is IPMI address (from the
log it should be
> > > > > > > >> > > 192.168.1.114)
> > > > > > > >>
> > > > > > > >> > > USER and PASS please set according
to you setup.
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > > Thanks
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > > Martin
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
[cid:image001.png@01D03669.DD48B4E0]<mailto:[cid:im
> > > > > > > >> > > > ag
> > > > > > > >> > > > e0
> > > > > > > >> > > > 01
> > > > > > > >> > > > .p
> > > > > > > >> > > > ng
> > > > > > > >> > > > @0
> > > > > > > >> > > > 1
> > > > > > > >> > > > D03669.DD48B4E0]>
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > Regards
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > Renchu Mathew | Sr. IT
Administrator
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > CRACKNELL DUBAI | P.O. Box
66231 | United Arab
> > > > > > > >> > > > Emirates
> > > > > > > >> > > > |
> > > > > > > >> > > > T
> > > > > > > >> > > > +971
> > > > > > > >>
> > > > > > > >> > > > 4
> > > > > > > >>
> > > > > > > >> > > > 3445417 | F +971 4
> > > > > > > >> > > >
3493675<tel:%2B971%204%203493675>
> > > > > > > >> > > > | M
> > > > > > > >> > > > +971
> > > > > > > >> > > > 50
7386484<tel:%2B971%2050%207386484>
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > ABU DHABI | DUBAI | LONDON |
MUSCAT | DOHA | JEDDAH
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > EMAIL
> > > > > > > >> > > >
renchu@cracknell.com<mailto:renchu@cracknell.com>
> > > > > > > >> > > > | WEB
www.cracknell.com<http://www.cracknell.com>
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > This email, its content and
any files transmitted
> > > > > > > >> > > > with it are
> > > > > > > >>
> > > > > > > >> > > > intended solely for the
addressee(s) and may be
> > > > > > > >> > > > legally privileged
> > > > > > > >>
> > > > > > > >> > > > and/or confidential. If you
are not the intended
> > > > > > > >> > > > recipient please
> > > > > > > >>
> > > > > > > >> > > > let us know by email reply and
delete it from the
> > > > > > > >> > > > system.
> > > > > > > >> > > > Please
> > > > > > > >>
> > > > > > > >> > > > note that any views or
opinions presented in this
> > > > > > > >> > > > email do not
> > > > > > > >>
> > > > > > > >> > > > necessarily represent those of
the company. Email
> > > > > > > >> > > > transmissions
> > > > > > > >>
> > > > > > > >> > > > cannot be guaranteed to be
secure or error-free as
> > > > > > > >> > > > information
> > > > > > > >>
> > > > > > > >> > > > could be intercepted,
corrupted, lost, destroyed,
> > > > > > > >> > > > arrive late or
> > > > > > > >>
> > > > > > > >> > > > incomplete, or contain
viruses. The company
> > > > > > > >> > > > therefore does not
> > > > > > > >>
> > > > > > > >> > > > accept liability for any
errors or omissions in the
> > > > > > > >> > > > contents of
> > > > > > > >>
> > > > > > > >> > > > this message which arise as a
result of email
> > > > > > > >> > > > transmission.
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > -----Original Message-----
> > > > > > > >>
> > > > > > > >> > > > From: Martin Perina
> > > > > > > >> > > >
[mailto:mperina@redhat.com<mailto:mperina@redhat.co
> > > > > > > >> > > > m>
> > > > > > > >> > > > ]
> > > > > > > >>
> > > > > > > >> > > > Sent: Thursday, January 22,
2015 4:49 PM
> > > > > > > >>
> > > > > > > >> > > > To: Renchu Mathew
> > > > > > > >>
> > > > > > > >> > > > Cc:
users@ovirt.org<mailto:users@ovirt.org>
> > > > > > > >>
> > > > > > > >> > > > Subject: Re: [ovirt-users]
Power Management config
> > > > > > > >> > > > on Ovirt
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > Hi,
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > according to [1] Fujitsu iRMC
should be accessible
> > > > > > > >> > > > using IPMI.
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > Now, I looked at logs, but I
cannot see any
> > > > > > > >> > > > fenceNode exection in
> > > > > > > >>
> > > > > > > >> > > > vdsm.log.
> > > > > > > >>
> > > > > > > >> > > > According to engine.log, host
> > > > > > > >> > > >
Node-02.cracknell.com<http://Node-02.cracknell.com>
> > > > > > > >> > > > was used as
> > > > > > > >>
> > > > > > > >> > > > fence proxy.
> > > > > > > >>
> > > > > > > >> > > > Are you sure that vdsm.log is
from this host?
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > Thanks
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > Martin
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > [1]
> > > > > > > >>
> > > > > > > >> > > >
https://www.redhat.com/archives/linux-cluster/2010-January/msg00056.
> > > > > > > >>
> > > > > > > >> > > > ht
> > > > > > > >>
> > > > > > > >> > > > ml
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > ----- Original Message -----
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > From: "Renchu
Mathew"
> > > > > > > >> > > > >
<renchu@cracknell.com<mailto:renchu@cracknell.com
> > > > > > > >> > > > > >>
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > To: "Martin
Perina"
> > > > > > > >> > > > >
<mperina@redhat.com<mailto:mperina@redhat.com>>
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > Cc:
users@ovirt.org<mailto:users@ovirt.org>
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > Sent: Thursday, January
22, 2015 12:37:51 PM
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > Subject: RE:
[ovirt-users] Power Management
> > > > > > > >> > > > > config on Ovirt
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > Hi Martin,
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > Please find attached log
files from engine and
> > > > > > > >> > > > > proxy host.
> > > > > > > >> > > > > Not
> > > > > > > >>
> > > > > > > >> > > > > sure
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > whether IPMI or which one
can be used. It is
> > > > > > > >> > > > > Fujitsu iRMC port.
> > > > > > > >>
> > > > > > > >> > > > > I also
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > tried the rsb but same
error.
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > Can we configure Power
management using Fujitsu
> > > > > > > >> > > > > iRMC?
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > Thanks & Regards
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > Renchu Mathew
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > -----Original
Message-----
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > From: Martin Perina
> > > > > > > >> > > > >
[mailto:mperina@redhat.com<mailto:mperina@redhat.
> > > > > > > >> > > > > co
> > > > > > > >> > > > > m>
> > > > > > > >> > > > > ]
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > Sent: Thursday, January
22, 2015 1:58 PM
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > To: Renchu Mathew
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > Cc:
users@ovirt.org<mailto:users@ovirt.org>
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > Subject: Re:
[ovirt-users] Power Management
> > > > > > > >> > > > > config on Ovirt
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > Hi,
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > first of all are you sure
that Fujitsu PRIMERGY
> > > > > > > >> > > > > is accessible
> > > > > > > >>
> > > > > > > >> > > > > using
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > IPMI protocol? If so,
could you provide
> > > > > > > >> > > > > engine.log and also
> > > > > > > >>
> > > > > > > >> > > > > vdsm.log
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > from host that was used
as fencing proxy? You can
> > > > > > > >> > > > > find out which
> > > > > > > >>
> > > > > > > >> > > > > host
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > is used as a proxy either
in Events tab after you
> > > > > > > >> > > > > execute the
> > > > > > > >>
> > > > > > > >> > > > > test or in engine.log.
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > Thanks
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > Martin Perina
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > ----- Original Message
-----
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > > From: "Renchu
Mathew"
> > > > > > > >> > > > > >
<renchu@cracknell.com<mailto:renchu@cracknell.c
> > > > > > > >> > > > > > om
> > > > > > > >> > > > > > >>
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > > To:
users@ovirt.org<mailto:users@ovirt.org>
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > > Sent: Thursday,
January 22, 2015 7:41:43 AM
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > > Subject:
[ovirt-users] Power Management config
> > > > > > > >> > > > > > on Ovirt
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > > Dear all,
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > > I am trying to
configure power management on
> > > > > > > >> > > > > > ovirt
> > > > > > > >> > > > > > v3.5
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
(ovirt-node-iso-3.5.0.ovirt35.20140912.el6) and
> > > > > > > >> > > > > > using two
> > > > > > > >>
> > > > > > > >> > > > > > Fujitsu
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > > PRIMERGY
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > > RX2540 M1 as node
hypervisor. I used Fujitsu
> > > > > > > >> > > > > > iRMC port on
> > > > > > > >>
> > > > > > > >> > > > > > power
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > > management
configuration. The test gives a
> > > > > > > >> > > > > > message “Test
> > > > > > > >>
> > > > > > > >> > > > > > failed,
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > > argument of type
‘NoneType’ is not iterable” as
> > > > > > > >> > > > > > below .
> > > > > > > >> > > > > > Also
> > > > > > > >>
> > > > > > > >> > > > > > tried
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > > rsb type as per
redhat document.
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
Fence-agents-3.1.5-35.el6_5.4.x86_64 is there
> > > > > > > >> > > > > > on both nodes.
> > > > > > > >>
> > > > > > > >> > > > > > Do we
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > > need to specify
anything in Options?
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > > Please help me.
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > > Best Regards
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > > Renchu Mathew
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
_______________________________________________
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > > Users mailing list
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
Users@ovirt.org<mailto:Users@ovirt.org<mailto:U
> > > > > > > >> > > > > > se rs @o vi rt .o r
> > > > > > > >> > > > > >
g%3cmailto:Users@ovirt.org>>
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
http://lists.ovirt.org/mailman/listinfo/users
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > > > >
> > > > > > > >>
> > > > > > > >> > > >
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >>
> > > > > > > >> >
> > > > > > > >>
> > > > > > > >>
_______________________________________________
> > > > > > > >> Users mailing list
> > > > > > > >>
Users@ovirt.org<mailto:Users@ovirt.org>
> > > > > > > >>
http://lists.ovirt.org/mailman/listinfo/users
> > > > > > > >>
> > > > > > > >>
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > Users mailing list
> > > > > > > Users(a)ovirt.org
> > > > > > > http://lists.ovirt.org/mailman/listinfo/users
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
>