Re: [ovirt-users] hosted-engine --deploy fails

> Hope this helps to find the root cause.... Not sure what you mean - did you have any other problem after applying your patch? Seems to me that the root cause is some code (the part you patched or something earlier) did not expect a prefix of /32, which is indeed quite rare. Not even certain how it works - did you also get a default gateway? How can you access it, if it's not in your subnet?

----- Original Message ----- > From: "Andreas Mather" <andreas(a)allaboutapps.at&gt; > To: users(a)ovirt.org > Sent: Wednesday, December 24, 2014 11:29:58 PM > Subject: Re: [ovirt-users] hosted-engine --deploy fails > > Hi All! > > Just did more research on this and it seems as if the reason was related to > my interface configuration. Disclaimer upfront: I've a public IP configured > on this server (since it's a hosted root server), but changed the IP addr > here to 192.168.0.99 > > I started with the output from ´vdsm-tool restore-nets': > ipv4addr, prefix = addr['address'].split('/') > ValueError: need more than 1 value to unpack > > So I dumped the addr dictionary: > {'address': '192.168.0.99', > 'family': 'inet', > 'flags': frozenset(['permanent']), > 'index': 2, > 'label': 'eth0', > 'prefixlen': 32, > 'scope': 'universe'} > > I've no clue why there's no "/32" at the end, but that's what my netmask > actually is due to the special configuration I got from my hosting provider: > > [root@vhost1 ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 > DEVICE=eth0 > BOOTPROTO=none > ONBOOT=yes > HWADDR=00:52:9F:A8:AA:BB > IPADDR=192.168.0.99 > NETMASK=255.255.255.255 > SCOPE="peer 192.168.0.1" > > (again, public IPs changed to private one, if that matters. And I skipped the > IPv6 config above...) > > So what I did next, was to patch the netinfo.py: > [root@vhost1 vdsm]# diff -u netinfo_orig.py netinfo.py > --- netinfo_orig.py 2014-12-24 22:16:23.362198715 +0100 > +++ netinfo.py 2014-12-24 22:16:02.567625247 +0100 > @@ -368,7 +368,12 @@ > if addr['family'] == 'inet': > ipv4addrs.append(addr['address']) > if 'secondary' not in addr['flags']: > - ipv4addr, prefix = addr['address'].split('/') > + """Assume /32 if no prefix was found""" > + if addr['address'].find('/') == -1: > + ipv4addr = addr['address'] > + prefix = "32" > + else: > + ipv4addr, prefix = addr['address'].split('/') > ipv4netmask = prefix2netmask(addr['prefixlen']) > else: > ipv6addrs.append(addr['address']) > > > and recompiled it: > [root@vhost1 vdsm]# python -m py_compile netinfo.py > > > > Et voilà: > vdsm-tool ran fine: > `hosted-engine --deploy' passed the previous failing stage! Thanks for great analysis, report and patch! Would you like to push it to gerrit? See [1] and [2] Adding Dan in case you do not want to, so that your patch isn't lost... > > Hope this helps to find the root cause.... Not sure what you mean - did you have any other problem after applying your patch? Seems to me that the root cause is some code (the part you patched or something earlier) did not expect a prefix of /32, which is indeed quite rare. Not even certain how it works - did you also get a default gateway? How can you access it, if it's not in your subnet? [1] http://www.ovirt.org/Develop [2] http://www.ovirt.org/Working_with_oVirt_Gerrit Best regards, -- Didi