[ovirt-users] Re: Unable to revive host after a reboot

Hi Julius, cc'd some people that might have some ideas :) Greg On Mon, Jul 30, 2018 at 11:07 AM Julius Schwartzenberg < julius.schwartzenberg(a)gmail.com&gt; wrote: > Hi, > > I recently had to shutdown my oVirt system which contains both the > engine and the host. After it came back up, the host was not able to > initialize anymore from the oVirt UI. > > First it kept getting stuck in a loop with setting "ExecutingStarted: > Jul 30, 2018, 9:06:21 AMSetting Host pc331 to Non-Operational mode." > > This was being repeated over and over again. It also gave this error: > Host pc331 does not comply with the cluster Default networks, the > following networks are missing on host: 'ovirtmgmt' > > Even though I am using that interface (ovirtmgmt) to access the system > and 'ip addr show' shows that it's set up properly. > > I tried some more things, including upgrading the host, When I do > that, the status changes to 'Installing' and later to 'Install > Failed'. > > Here are the engine.log, vdsm.log and ovirt-host-deploy*.log: > https://drive.google.com/open?id=13vIUDVjPynmAK0pnFRLabDfUlG1lmkpI > https://drive.google.com/open?id=10Zm2dDpxM2k5A2bEs_l6gOv_yWv4cjlN > https://drive.google.com/open?id=1AieWMzRuA0gZj3x5yDH1AGnsT2E3VtOM > > Any idea what is going wrong (what I'm doing wrong) and how to solve it? > Thanks in advance! > > Best regards, > Julius > -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX Red Hat NA <https://www.redhat.com/> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig>