Re: [ovirt-users] Power management - oVirt 4,2

On Fri, Feb 23, 2018 at 11:34 AM, Terry hey <recreationh(a)gmail.com&gt; wrote: > Dear Martin, > I am very sorry that i reply you so late. > Do you mean that 4.2 can support ilo5 by selecting the option "ilo4" in > power management? > ​Yes ​ > "from the error message below I'd say that you are either not using > correct IP address of iLO5 interface or you haven't enabled remote access > to your iLO5 interface" > I just try it and double confirm that i did not type a wrong IP. But the > error message is same. > ​Unfortunately I don't have iLO5 server available, so I cannot provide more details. Anyway could you please double check your server documentation, that you have enabled access to iLO5 IPMI interface correctly? And could you please share output of following command? ​ f ​​ ence_ilo4 -a <IP_ADDRESS> -l <USERNAME> -p <PASSWORD> -v -o status Thanks Martin ​ > > Regards > Terry > > 2018-02-08 16:13 GMT+08:00 Martin Perina <mperina(a)redhat.com&gt;: > >> Hi Terry, >> >> from the error message below I'd say that you are either not using >> correct IP address of iLO5 interface or you haven't enabled remote access >> to your iLO5 interface. >> According to [1] iLO5 should fully IPMI compatible. So are you sure that >> you enabled the remote access to your iLO5 address in iLO5 management? >> Please consult [1] how to enable everything and use a user with at least >> Operator privileges. >> >> Regards >> >> Martin >> >> [1] https://support.hpe.com/hpsc/doc/public/display?docId=a00018324en_us >> >> >> On Thu, Feb 8, 2018 at 7:57 AM, Terry hey <recreationh(a)gmail.com&gt; wrote: >> >>> Dear Martin, >>> >>> Thank you for helping me. To answer your question, >>> 1. Does the Test in Edit fence agent dialog work​? >>> Ans: it shows that "Test failed: Internal JSON-RPC error" >>> >>> Regardless the fail result, i press "OK" to enable power management. >>> There are four event log appear in "Events" >>> ********************************The follwing are the log in >>> "Event""******************************** >>> Host host01 configuration was updated by admin@internal-authz. >>> Kdump integration is enabled for host hostv01, but kdump is not >>> configured properly on host. >>> Health check on Host host01 indicates that future attempts to Stop this >>> host using Power-Management are expected to fail. >>> Health check on Host host01 indicates that future attempts to Start >>> this host using Power-Management are expected to fail. >>> >>> 2. If not could you please try to install fence-agents-all package on >>> different host and execute? >>> Ans: It just shows "Connection timed out". >>> >>> So, does it means that it is not support iLo5 now or i configure >>> wrongly? >>> >>> Regards, >>> Terry >>> >>> 2018-02-02 15:46 GMT+08:00 Martin Perina <mperina(a)redhat.com&gt;: >>> >>>> >>>> >>>> On Fri, Feb 2, 2018 at 5:40 AM, Terry hey <recreationh(a)gmail.com&gt; >>>> wrote: >>>> >>>>> Dear Martin, >>>>> >>>>> Um..Since i am going to use HPE ProLiant DL360 Gen10 Server to setup >>>>> oVirt Node(Hypervisor). HP G10 is using ilo5 rather than ilo4. Therefore, i >>>>> would like to ask whether oVirt power management support iLO5 or not. >>>>> >>>> >>>> ​We don't have any hardware with iLO5 available, but there is a good >>>> chance that it will be compatible with iLO4. Have you tried to setup your >>>> server with iLO4? Does the Test in Edit fence agent dialog work​? If not >>>> could you please try to install fence-agents-all package on different host >>>> and execute following: >>>> >>>> ​​ >>>> f >>>> ​​ >>>> ence_ilo4 -a <IP_ADDRESS> -l <USERNAME> -p <PASSWORD> -v -o status >>>> >>>> and share the output? >>>> >>>> Thanks >>>> >>>> Martin >>>> >>>> >>>>> If not, do you have any idea to setup power management with HP G10? >>>>> >>>>> Regards, >>>>> Terry >>>>> >>>>> 2018-02-01 16:21 GMT+08:00 Martin Perina <mperina(a)redhat.com&gt;: >>>>> >>>>>> >>>>>> >>>>>> On Wed, Jan 31, 2018 at 11:19 PM, Luca 'remix_tj' Lorenzetto < >>>>>> lorenzetto.luca(a)gmail.com&gt; wrote: >>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> From ilo3 and up, ilo fencing agents are an alias for fence_ipmi. >>>>>>> Try using the standard ipmi. >>>>>>> >>>>>> >>>>>> ​It's not just an alias, ilo3/ilo4 also have different defaults than >>>>>> ipmilan. For example if you use ilo4, then by default following is used: >>>>>> >>>>>> ​ >>>>>> >>>>>> ​lanplus=1 >>>>>> power_wait=4 >>>>>> >>>>>> ​So I recommend to start with ilo4 and add any necessary custom >>>>>> options into Options field. If you need some custom >>>>>> options, could you please share them with us? It would be very >>>>>> helpful for us, if needed we could introduce ilo5 with >>>>>> different defaults then ilo4 >>>>>> >>>>>> Thanks >>>>>> >>>>>> Martin >>>>>> >>>>>> >>>>>>> Luca >>>>>>> >>>>>>> >>>>>>> >>>>>>> Il 31 gen 2018 11:14 PM, "Terry hey" <recreationh(a)gmail.com&gt; ha >>>>>>> scritto: >>>>>>> >>>>>>>> Dear all, >>>>>>>> Did oVirt 4.2 Power management support iLO5 as i could not see >>>>>>>> iLO5 option in Power Management. >>>>>>>> >>>>>>>> Regards >>>>>>>> Terry >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Users mailing list >>>>>>>> Users(a)ovirt.org >>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>> >>>>>>>> >>>>>>> _______________________________________________ >>>>>>> Users mailing list >>>>>>> Users(a)ovirt.org >>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Martin Perina >>>>>> Associate Manager, Software Engineering >>>>>> Red Hat Czech s.r.o. >>>>>> >>>>> >>>>> >>>> >>>> >>>> -- >>>> Martin Perina >>>> Associate Manager, Software Engineering >>>> Red Hat Czech s.r.o. >>>> >>> >>> >> >> >> -- >> Martin Perina >> Associate Manager, Software Engineering >> Red Hat Czech s.r.o. >> > > -- Martin Perina Associate Manager, Software Engineering Red Hat Czech s.r.o.