On 22/02/18 10:40 +0200, Alexandr Krivulya wrote:
Hello, the same problem after upgrade to 4.2.1 :(
18.01.2018 11:53, Daniel Helgenberger пишет:
>Hello,
>
>yesterday I upgraded to 4.2.0 from 4.1.8.
>
>Now I notice I cannot assign host dev pass though any more; in the GUI
>the 'Pinnded to host' list is empty; I cannot select any host for pass
>through host pinning.
Does the host that previously worked report device passthrough
capability? In the UI it's the "Device Passthrough: Enabled" field.
(and similarly named field in vdsm-client getCapabilities call)
>When I was creating the particular VM in 4.1 it was working as
expected.
>
>The hostdev from before the upgrades are still present. I tried to
>remove them and got an NPE (see below).
>
>As a workaround, is the old hostusb[1] method I know back from 3.x still working in
the 4.x
>line?
>
>AFAICT IOMMU is working
>
>>dmesg | grep -e DMAR -e IOMMU
>>[ 0.000000] ACPI: DMAR 000000007b7e7000 002C6 (v01 HP ProLiant 00000001 HP
00000001)
>>[ 0.168032] DMAR: Host address width 46
>>[ 0.168034] DMAR: DRHD base: 0x000000fbffc000 flags: 0x0
>>[ 0.168047] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466
ecap f020de
>>[ 0.168050] DMAR: DRHD base: 0x000000c7ffc000 flags: 0x1
>>[ 0.168061] DMAR: dmar1: reg_base_addr c7ffc000 ver 1:0 cap 8d2078c106f0466
ecap f020de
>>[ 0.168063] DMAR: RMRR base: 0x00000079174000 end: 0x00000079176fff
>>[ 0.168065] DMAR: RMRR base: 0x000000791f4000 end: 0x000000791f7fff
>>[ 0.168067] DMAR: RMRR base: 0x000000791de000 end: 0x000000791f3fff
>>[ 0.168070] DMAR: RMRR base: 0x000000791cb000 end: 0x000000791dbfff
>>[ 0.168071] DMAR: RMRR base: 0x000000791dc000 end: 0x000000791ddfff
>>[ 0.168073] DMAR: ATSR flags: 0x0
>>[ 0.168075] DMAR: ATSR flags: 0x0
>>[ 0.168079] DMAR-IR: IOAPIC id 10 under DRHD base 0xfbffc000 IOMMU 0
>>[ 0.168082] DMAR-IR: IOAPIC id 8 under DRHD base 0xc7ffc000 IOMMU 1
>>[ 0.168084] DMAR-IR: IOAPIC id 9 under DRHD base 0xc7ffc000 IOMMU 1
>>[ 0.168086] DMAR-IR: HPET id 0 under DRHD base 0xc7ffc000
>>[ 0.168088] DMAR-IR: Queued invalidation will be enabled to support x2apic and
Intr-remapping.
>>[ 0.169073] DMAR-IR: Enabled IRQ remapping in x2apic mode
>Thanks,
>
>[1]
https://www.ovirt.org/develop/release-management/features/virt/hostusb/
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users