Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
----- Original Message -----
From: "Ricardo Esteves"
<ricardo.m.esteves(a)gmail.com>
To: "Federico Simoncelli" <fsimonce(a)redhat.com>
Cc: users(a)ovirt.org
Sent: Wednesday, May 14, 2014 1:45:53 AM
Subject: RE: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
In attachment follows the defaults and the modified versions of the nodes
files.
If selecting the relevant host in "Hosts" you see the bnx2i interface in the
"Network Interfaces" subtab, then you can try to:
1. create a new network in the "Network" tab, "VM network" checkbox
should
be disabled
2. select the relevant host in "Hosts" and use "Setup Host Networks"
in the
"Network Interfaces" subtab
3. configure the bnx2i interface and assign it to the new network you just
created
4. in "iSCSI Multipathing" subtab of tab "Data Center" add a new entry
where
you bind the iscsi connection to the new network you created
Ping me on IRC if you need more help. My nick is fsimonce on #ovirt
--
Federico
-----Original Message-----
From: Federico Simoncelli [mailto:fsimonce@redhat.com]
Sent: terça-feira, 13 de Maio de 2014 08:58
To: Ricardo Esteves
Cc: users(a)ovirt.org
Subject: Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
----- Original Message -----
> From: "Ricardo Esteves" <ricardo.m.esteves(a)gmail.com>
> To: users(a)ovirt.org
> Sent: Friday, April 11, 2014 1:07:31 AM
> Subject: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
>
> Hi,
>
> I've put my host on maintenance, then i configured iscsi offload for
> my broadcom cards changing target's file's (192.168.12.2,3260 and
> 192.168.12.4,3260) in my node
> iqn.1986-03.com.hp:storage.msa2324i.1226151a6 to use interface
> bnx2i.d8:d3:85:67:e3:bb, but after activating the host, configurations
> are back to default.
Can you share the changes you made? Thanks.