6:49 p.m.
That looks like the normal state for a LACP bond, but it does record some churn (bond
renegotiations, I believe). So it probably bounced once or twice coming up. Maybe a slow
switch, maybe a switch relying on dynamic bonding instead of static bonds, and taking
longer to establish.
For the ones with a down link, and this one too, you could ask the network guys if they
statically configured the bond, or if they could, might make it quicker to bring it up.
I don’t think anything updates when the host is in maintenance, you could take it out and
see what happens :) The bond is lower level though, should come up if it’s configured
properly, and you should be able to see that on the host.
-Darrell
a bond on one of mine:
# cat /proc/net/bonding/bond0
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: IEEE 802.3ad Dynamic link aggregation
Transmit Hash Policy: layer2 (0)
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 0
Down Delay (ms): 0
802.3ad info
LACP rate: slow
Min links: 0
Aggregator selection policy (ad_select): stable
System priority: 65535
System MAC address: 00:0f:53:08:4b:ac
Active Aggregator Info:
Aggregator ID: 1
Number of ports: 2
Actor Key: 13
Partner Key: 14
Partner Mac Address: 64:64:9b:5e:9b:00
Slave Interface: p1p1
MII Status: up
Speed: 10000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 00:0f:53:08:4b:ac
Slave queue ID: 0
Aggregator ID: 1
Actor Churn State: none
Partner Churn State: none
Actor Churned Count: 0
Partner Churned Count: 0
details actor lacp pdu:
system priority: 65535
system mac address: 00:0f:53:08:4b:ac
port key: 13
port priority: 255
port number: 1
port state: 61
details partner lacp pdu:
system priority: 127
system mac address: 64:64:9b:5e:9b:00
oper key: 14
port priority: 127
port number: 8
port state: 63
Slave Interface: p1p2
MII Status: up
Speed: 10000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 00:0f:53:08:4b:ad
Slave queue ID: 0
Aggregator ID: 1
Actor Churn State: none
Partner Churn State: none
Actor Churned Count: 0
Partner Churned Count: 0
details actor lacp pdu:
system priority: 65535
system mac address: 00:0f:53:08:4b:ac
port key: 13
port priority: 255
port number: 2
port state: 61
details partner lacp pdu:
system priority: 127
system mac address: 64:64:9b:5e:9b:00
oper key: 14
port priority: 127
port number: 7
port state: 63
From: Gianluca Cecchi <gianluca.cecchi(a)gmail.com>
Subject: [ovirt-users] Debugging warning messages about bonding mode 4
Date: October 6, 2017 at 6:28:16 AM CDT
To: users
Hello,
on a 2 nodes cluster in 4.1.6 I have this situation.
Every node has 3 bonds, each one composed by 2 network adapters and each one of type
mode=4
(actually in setup networks I have configured custom and then the value:
"mode=4 miimon=100"
)
At this moment only one of the servers has access to FC storage, while the other is
currently on maintenance.
On 2 of the 3 bonds of the active server I get an exclamation point in "Network
Interfaces" subtab with this mouseover popup
Bond is in link aggregation mode (mode 4), but no partner mac has been reported for it
What is the exact meaning of this message? Do I have to care about (I think so..)?
What should I report to network guys?
Eg, one of these two warning bonds status is:
# cat /proc/net/bonding/bond2
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: IEEE 802.3ad Dynamic link aggregation
Transmit Hash Policy: layer2 (0)
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 0
Down Delay (ms): 0
802.3ad info
LACP rate: slow
Min links: 0
Aggregator selection policy (ad_select): stable
System priority: 65535
System MAC address: 48:df:37:0c:7f:5a
Active Aggregator Info:
Aggregator ID: 5
Number of ports: 2
Actor Key: 9
Partner Key: 6
Partner Mac Address: b8:38:61:9c:75:80
Slave Interface: ens2f2
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 2
Permanent HW addr: 48:df:37:0c:7f:5a
Slave queue ID: 0
Aggregator ID: 5
Actor Churn State: none
Partner Churn State: none
Actor Churned Count: 2
Partner Churned Count: 3
details actor lacp pdu:
system priority: 65535
system mac address: 48:df:37:0c:7f:5a
port key: 9
port priority: 255
port number: 1
port state: 61
details partner lacp pdu:
system priority: 32768
system mac address: b8:38:61:9c:75:80
oper key: 6
port priority: 32768
port number: 293
port state: 61
Slave Interface: ens2f3
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 2
Permanent HW addr: 48:df:37:0c:7f:5b
Slave queue ID: 0
Aggregator ID: 5
Actor Churn State: none
Partner Churn State: none
Actor Churned Count: 0
Partner Churned Count: 3
details actor lacp pdu:
system priority: 65535
system mac address: 48:df:37:0c:7f:5a
port key: 9
port priority: 255
port number: 2
port state: 61
details partner lacp pdu:
system priority: 32768
system mac address: b8:38:61:9c:75:80
oper key: 6
port priority: 32768
port number: 549
port state: 61
Also, the other node (that is currently in maintenance) shows one of the 2 interfaces of
bond2 (ens2f2) as down (red arrow) but on the host
# ip link show ens2f2
6: ens2f2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond2
state UP mode DEFAULT qlen 1000
link/ether 48:df:37:0c:85:4e brd ff:ff:ff:ff:ff:ff
#
Does this depend on the host being in maintenance?
Perhaps when a host is in maintenance, the warnings on it are not checked/updated again
from engine?
Thanks in advance,
Gianluca
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users